Date   
why release a version called 2019.x

Davy Cuppens
 

Hi folks
 
Wakywaky we are 2020 I know and understand that NVDA has put off its release due to reported software bugs. But supposing last month we had a version jaws 2019.X, in november their version was already given the name 2020 which is normal and gives also a modern look on your software name in this year. Therefore I hope the devs won(t be lagging behind in their name choice of the version and move it to NVDA2020. If you chose the year as software reference then NVDA is obliged to do so.
Davy
 

Sent: Tuesday, January 07, 2020 9:26 PM
Subject: [nvda] Quick update for everyone
 

Hi All,

 

I just upgraded to the 19.3 Beta 1 version of NVDA.

A quick report shows the NVDA app much more responsive.

I also upgraded my plugins with no troubles – it all seems to work perfectly.

Last I upgraded to the NVDA Ellequence plugin for VI version III and Ellequence is even more responsive.

 

Thanks for all the great work guys.

 

Thanks,

Sam

 

locked NVDA remote

Kerryn Gunness
 


hi guys
 
remote 2.2 gives an error while installing, what could cause this?
 
latest NVDA and windows 10
 

Re: Code Factory eloquence

Robert Doc Wright godfearer
 

Hurray, I found the right place thanks to this list.

 

******

character is found in how you treat people who cannot do anything for you!                                                                       

 

From: Gene
Sent: Tuesday, January 7, 2020 1:01 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory eloquence

 

I tried the demo and it works.

 

I noticed some strange behavior but that may have been only in switching between Via Voice and Eloquence.  People generally don’t use Via Voice any longer so that problem may exist for only a small number of people who switch between Eloquence and Via Voice.

 

Gene

----- Original Message -----

Sent: Tuesday, January 07, 2020 1:40 PM

Subject: Re: [nvda] Code Factory eloquence

 

Do you know if we have people on this list that are using it successfully?

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Tuesday, January 7, 2020 12:38 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory eloquence

 

There is a Code Factory version of the add-on that is compatible.

 

Gene

----- Original Message -----

From: Rui Fontes

Sent: Tuesday, January 07, 2020 1:22 PM

Subject: Re: [nvda] Code Factory eloquence

 

I don’t know…


Rui Fontes

 

 

De: nvda@nvda.groups.io <nvda@nvda.groups.io> Em Nome De Sam Bushman
Enviada: terça-feira, 7 de janeiro de 2020 19:22
Para: nvda@nvda.groups.io
Assunto: Re: [nvda] Code Factory eloquence

 

Hi Rui/All,

 

I currently have the NVDA latest version of ellequence.

Does the beta of the NVDA Ellequence plugin work with the beta 19.3 beta 1 work well yet?

 

Thanks,

Sam

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Rui Fontes
Sent: Tuesday, January 7, 2020 11:48 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory eloquence

 

Hello!

 

You have bought the SAPI5 version of Eloquence.

 

So, in the synths list of NVDA you should choose Microsoft Speech API 5 and then with NVDA+Control + arrows select the desired language of Eloquence…


Rui Fontes

 

 

De: nvda@nvda.groups.io <nvda@nvda.groups.io> Em Nome De Robert Doc Wright godfearer
Enviada: terça-feira, 7 de janeiro de 2020 18:30
Para: nvda@nvda.groups.io
Assunto: Re: [nvda] Code Factory eloquence

 

Its not showing up anywhere but the icon on the desktop. When I open it it puts me in settings which says nothing about which screen reader you wish to use with it.

 

******

character is found in how you treat people who cannot do anything for you!                                                                       

 

From: Chris Mullins
Sent: Tuesday, January 7, 2020 11:26 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory eloquence

 

Hi

Use NVDA+Control+s to open the synthesizer dialog, see if it is

listed, select it and Ok the dialog.  Then use NVDA+Control+v to

adjust the voice settings.

 

Cheers

Chris

 

On 07/01/2020, David Griffith <daj.griffith@...> wrote:

> Did you purchase the Sapi 5 version or the NVDA addon?

> Others may know better as I have no direct experience but I think there may

> be issues with associating the correct version of the addon version with the

> version of NVDA you are using.

> That as I understand it  from other discussions the latest addon version is

> designed for NVDA 19.3  and not 19.2.

> If you are still running 19.2  I think you may possibly need the previous

> addon version.

> This is all a little confusing as, as far as I understand it 19.3 is still

> in beta and not officially released yet.

> Personally I always use Sapi 5  versions and avoid using addon synthesisers

> to avoid these and other complications.

> David Griffith

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Robert Doc

> Wright godfearer

> Sent: 07 January 2020 18:13

> To: nvda@nvda.groups.io

> Subject: [nvda] Code Factory eloquence

> I just purchased, installed and registered eloquence. How do I get NVDA to

> use it?

> ******

> character is found in how you treat people who cannot do anything for you!

>

 

 

 

 

Re: Quick update for everyone

Robert Doc Wright godfearer
 

I’m getting concerned. I went to a Code Factory page and purchased Eloquence. I downloaded Eloquence for Windows. It did not say anything about being an addon or a Sappi 5. After installing I am not seeing it among the NVDA synthesizers.  

 

******

character is found in how you treat people who cannot do anything for you!                                                                       

 

From: Sam Bushman
Sent: Tuesday, January 7, 2020 1:26 PM
To: nvda@nvda.groups.io
Subject: [nvda] Quick update for everyone

 

Hi All,

 

I just upgraded to the 19.3 Beta 1 version of NVDA.

A quick report shows the NVDA app much more responsive.

I also upgraded my plugins with no troubles – it all seems to work perfectly.

Last I upgraded to the NVDA Ellequence plugin for VI version III and Ellequence is even more responsive.

 

Thanks for all the great work guys.

 

Thanks,

Sam

 

 

Quick update for everyone

Sam Bushman
 

Hi All,

 

I just upgraded to the 19.3 Beta 1 version of NVDA.

A quick report shows the NVDA app much more responsive.

I also upgraded my plugins with no troubles – it all seems to work perfectly.

Last I upgraded to the NVDA Ellequence plugin for VI version III and Ellequence is even more responsive.

 

Thanks for all the great work guys.

 

Thanks,

Sam

 

Re: Code Factory eloquence

Gene
 

I tried the demo and it works.
 
I noticed some strange behavior but that may have been only in switching between Via Voice and Eloquence.  People generally don’t use Via Voice any longer so that problem may exist for only a small number of people who switch between Eloquence and Via Voice.
 
Gene

----- Original Message -----
Sent: Tuesday, January 07, 2020 1:40 PM
Subject: Re: [nvda] Code Factory eloquence
 

Do you know if we have people on this list that are using it successfully?

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Tuesday, January 7, 2020 12:38 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory eloquence

 

There is a Code Factory version of the add-on that is compatible.

 

Gene

----- Original Message -----

From: Rui Fontes

Sent: Tuesday, January 07, 2020 1:22 PM

Subject: Re: [nvda] Code Factory eloquence

 

I don’t know…


Rui Fontes

 

 

De: nvda@nvda.groups.io <nvda@nvda.groups.io> Em Nome De Sam Bushman
Enviada: terça-feira, 7 de janeiro de 2020 19:22
Para: nvda@nvda.groups.io
Assunto: Re: [nvda] Code Factory eloquence

 

Hi Rui/All,

 

I currently have the NVDA latest version of ellequence.

Does the beta of the NVDA Ellequence plugin work with the beta 19.3 beta 1 work well yet?

 

Thanks,

Sam

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Rui Fontes
Sent: Tuesday, January 7, 2020 11:48 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory eloquence

 

Hello!

 

You have bought the SAPI5 version of Eloquence.

 

So, in the synths list of NVDA you should choose Microsoft Speech API 5 and then with NVDA+Control + arrows select the desired language of Eloquence…


Rui Fontes

 

 

De: nvda@nvda.groups.io <nvda@nvda.groups.io> Em Nome De Robert Doc Wright godfearer
Enviada: terça-feira, 7 de janeiro de 2020 18:30
Para: nvda@nvda.groups.io
Assunto: Re: [nvda] Code Factory eloquence

 

Its not showing up anywhere but the icon on the desktop. When I open it it puts me in settings which says nothing about which screen reader you wish to use with it.

 

******

character is found in how you treat people who cannot do anything for you!                                                                       

 

From: Chris Mullins
Sent: Tuesday, January 7, 2020 11:26 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory eloquence

 

Hi

Use NVDA+Control+s to open the synthesizer dialog, see if it is

listed, select it and Ok the dialog.  Then use NVDA+Control+v to

adjust the voice settings.

 

Cheers

Chris

 

On 07/01/2020, David Griffith <daj.griffith@...> wrote:

> Did you purchase the Sapi 5 version or the NVDA addon?

>

> Others may know better as I have no direct experience but I think there may

> be issues with associating the correct version of the addon version with the

> version of NVDA you are using.

>

> That as I understand it  from other discussions the latest addon version is

> designed for NVDA 19.3  and not 19.2.

>

> If you are still running 19.2  I think you may possibly need the previous

> addon version.

>

>

>

> This is all a little confusing as, as far as I understand it 19.3 is still

> in beta and not officially released yet.

>

>

>

> Personally I always use Sapi 5  versions and avoid using addon synthesisers

> to avoid these and other complications.

>

>

>

> David Griffith

>

>

>

>

>

>

>

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Robert Doc

> Wright godfearer

> Sent: 07 January 2020 18:13

> To: nvda@nvda.groups.io

> Subject: [nvda] Code Factory eloquence

>

>

>

> I just purchased, installed and registered eloquence. How do I get NVDA to

> use it?

>

>

>

> ******

>

> character is found in how you treat people who cannot do anything for you!

>

>

>

>

>

>

>

>

>

 

 

 

Re: Code Factory eloquence

Sam Bushman
 

Do you know if we have people on this list that are using it successfully?

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Tuesday, January 7, 2020 12:38 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory eloquence

 

There is a Code Factory version of the add-on that is compatible.

 

Gene

----- Original Message -----

From: Rui Fontes

Sent: Tuesday, January 07, 2020 1:22 PM

Subject: Re: [nvda] Code Factory eloquence

 

I don’t know…


Rui Fontes

 

 

De: nvda@nvda.groups.io <nvda@nvda.groups.io> Em Nome De Sam Bushman
Enviada: terça-feira, 7 de janeiro de 2020 19:22
Para: nvda@nvda.groups.io
Assunto: Re: [nvda] Code Factory eloquence

 

Hi Rui/All,

 

I currently have the NVDA latest version of ellequence.

Does the beta of the NVDA Ellequence plugin work with the beta 19.3 beta 1 work well yet?

 

Thanks,

Sam

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Rui Fontes
Sent: Tuesday, January 7, 2020 11:48 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory eloquence

 

Hello!

 

You have bought the SAPI5 version of Eloquence.

 

So, in the synths list of NVDA you should choose Microsoft Speech API 5 and then with NVDA+Control + arrows select the desired language of Eloquence…


Rui Fontes

 

 

De: nvda@nvda.groups.io <nvda@nvda.groups.io> Em Nome De Robert Doc Wright godfearer
Enviada: terça-feira, 7 de janeiro de 2020 18:30
Para: nvda@nvda.groups.io
Assunto: Re: [nvda] Code Factory eloquence

 

Its not showing up anywhere but the icon on the desktop. When I open it it puts me in settings which says nothing about which screen reader you wish to use with it.

 

******

character is found in how you treat people who cannot do anything for you!                                                                       

 

From: Chris Mullins
Sent: Tuesday, January 7, 2020 11:26 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory eloquence

 

Hi

Use NVDA+Control+s to open the synthesizer dialog, see if it is

listed, select it and Ok the dialog.  Then use NVDA+Control+v to

adjust the voice settings.

 

Cheers

Chris

 

On 07/01/2020, David Griffith <daj.griffith@...> wrote:

> Did you purchase the Sapi 5 version or the NVDA addon?

> Others may know better as I have no direct experience but I think there may

> be issues with associating the correct version of the addon version with the

> version of NVDA you are using.

> That as I understand it  from other discussions the latest addon version is

> designed for NVDA 19.3  and not 19.2.

> If you are still running 19.2  I think you may possibly need the previous

> addon version.

> This is all a little confusing as, as far as I understand it 19.3 is still

> in beta and not officially released yet.

> Personally I always use Sapi 5  versions and avoid using addon synthesisers

> to avoid these and other complications.

> David Griffith

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Robert Doc

> Wright godfearer

> Sent: 07 January 2020 18:13

> To: nvda@nvda.groups.io

> Subject: [nvda] Code Factory eloquence

> I just purchased, installed and registered eloquence. How do I get NVDA to

> use it?

> ******

> character is found in how you treat people who cannot do anything for you!

>

 

 

 

Re: Code Factory eloquence

Gene
 

There is a Code Factory version of the add-on that is compatible.
 
Gene

----- Original Message -----
From: Rui Fontes
Sent: Tuesday, January 07, 2020 1:22 PM
Subject: Re: [nvda] Code Factory eloquence
 

I don’t know…


Rui Fontes

 

 

De: nvda@nvda.groups.io <nvda@nvda.groups.io> Em Nome De Sam Bushman
Enviada: terça-feira, 7 de janeiro de 2020 19:22
Para: nvda@nvda.groups.io
Assunto: Re: [nvda] Code Factory eloquence

 

Hi Rui/All,

 

I currently have the NVDA latest version of ellequence.

Does the beta of the NVDA Ellequence plugin work with the beta 19.3 beta 1 work well yet?

 

Thanks,

Sam

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Rui Fontes
Sent: Tuesday, January 7, 2020 11:48 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory eloquence

 

Hello!

 

You have bought the SAPI5 version of Eloquence.

 

So, in the synths list of NVDA you should choose Microsoft Speech API 5 and then with NVDA+Control + arrows select the desired language of Eloquence…


Rui Fontes

 

 

De: nvda@nvda.groups.io <nvda@nvda.groups.io> Em Nome De Robert Doc Wright godfearer
Enviada: terça-feira, 7 de janeiro de 2020 18:30
Para: nvda@nvda.groups.io
Assunto: Re: [nvda] Code Factory eloquence

 

Its not showing up anywhere but the icon on the desktop. When I open it it puts me in settings which says nothing about which screen reader you wish to use with it.

 

******

character is found in how you treat people who cannot do anything for you!                                                                       

 

From: Chris Mullins
Sent: Tuesday, January 7, 2020 11:26 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory eloquence

 

Hi

Use NVDA+Control+s to open the synthesizer dialog, see if it is

listed, select it and Ok the dialog.  Then use NVDA+Control+v to

adjust the voice settings.

 

Cheers

Chris

 

On 07/01/2020, David Griffith <daj.griffith@...> wrote:

> Did you purchase the Sapi 5 version or the NVDA addon?

>

> Others may know better as I have no direct experience but I think there may

> be issues with associating the correct version of the addon version with the

> version of NVDA you are using.

>

> That as I understand it  from other discussions the latest addon version is

> designed for NVDA 19.3  and not 19.2.

>

> If you are still running 19.2  I think you may possibly need the previous

> addon version.

>

>

>

> This is all a little confusing as, as far as I understand it 19.3 is still

> in beta and not officially released yet.

>

>

>

> Personally I always use Sapi 5  versions and avoid using addon synthesisers

> to avoid these and other complications.

>

>

>

> David Griffith

>

>

>

>

>

>

>

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Robert Doc

> Wright godfearer

> Sent: 07 January 2020 18:13

> To: nvda@nvda.groups.io

> Subject: [nvda] Code Factory eloquence

>

>

>

> I just purchased, installed and registered eloquence. How do I get NVDA to

> use it?

>

>

>

> ******

>

> character is found in how you treat people who cannot do anything for you!

>

>

>

>

>

>

>

>

>

 

 

 

Re: Code Factory eloquence

Gene
 

I just realized that it won’t show up as a choice in the main dialog.  The clue is that one of the choices in NVDA is SAPI 5.  Choose that option.  Then go into voices, control NVDA key v and up and down arrow through the availble voices.  The Eloquence voices will be there, but they won’t say Eloquence.  You will see voices that are in Eloquence such as Reed, the voice I suspect the majority of Eloquence users use.
 
Gene

----- Original Message -----
Sent: Tuesday, January 07, 2020 12:30 PM
Subject: Re: [nvda] Code Factory eloquence
 

Its not showing up anywhere but the icon on the desktop. When I open it it puts me in settings which says nothing about which screen reader you wish to use with it.

 

******

character is found in how you treat people who cannot do anything for you!                                                                       

 

From: Chris Mullins
Sent: Tuesday, January 7, 2020 11:26 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory eloquence

 

Hi

Use NVDA+Control+s to open the synthesizer dialog, see if it is

listed, select it and Ok the dialog.  Then use NVDA+Control+v to

adjust the voice settings.

 

Cheers

Chris

 

On 07/01/2020, David Griffith <daj.griffith@...> wrote:

> Did you purchase the Sapi 5 version or the NVDA addon?

>

> Others may know better as I have no direct experience but I think there may

> be issues with associating the correct version of the addon version with the

> version of NVDA you are using.

>

> That as I understand it  from other discussions the latest addon version is

> designed for NVDA 19.3  and not 19.2.

>

> If you are still running 19.2  I think you may possibly need the previous

> addon version.

>

>

>

> This is all a little confusing as, as far as I understand it 19.3 is still

> in beta and not officially released yet.

>

>

>

> Personally I always use Sapi 5  versions and avoid using addon synthesisers

> to avoid these and other complications.

>

>

>

> David Griffith

>

>

>

>

>

>

>

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Robert Doc

> Wright godfearer

> Sent: 07 January 2020 18:13

> To: nvda@nvda.groups.io

> Subject: [nvda] Code Factory eloquence

>

>

>

> I just purchased, installed and registered eloquence. How do I get NVDA to

> use it?

>

>

>

> ******

>

> character is found in how you treat people who cannot do anything for you!

>

>

>

>

>

>

>

>

>

 

 

 

Re: Code Factory eloquence

Gene
 

The SAPI 5 Eloquence?
 
Use the command control NVDA key s to open the synthesizers dialog.  Up and down arrow to find Eloquence.  Press enter. 
 
I am assuming that the product is properly registered and running so you have access to it.
 
Gene

----- Original Message -----
Sent: Tuesday, January 07, 2020 12:13 PM
Subject: [nvda] Code Factory eloquence
 

I just purchased, installed and registered eloquence. How do I get NVDA to use it?

 

******

character is found in how you treat people who cannot do anything for you!                                                                       

 

Re: Code Factory eloquence

Rui Fontes
 

I don’t know…


Rui Fontes

 

 

De: nvda@nvda.groups.io <nvda@nvda.groups.io> Em Nome De Sam Bushman
Enviada: terça-feira, 7 de janeiro de 2020 19:22
Para: nvda@nvda.groups.io
Assunto: Re: [nvda] Code Factory eloquence

 

Hi Rui/All,

 

I currently have the NVDA latest version of ellequence.

Does the beta of the NVDA Ellequence plugin work with the beta 19.3 beta 1 work well yet?

 

Thanks,

Sam

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Rui Fontes
Sent: Tuesday, January 7, 2020 11:48 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory eloquence

 

Hello!

 

You have bought the SAPI5 version of Eloquence.

 

So, in the synths list of NVDA you should choose Microsoft Speech API 5 and then with NVDA+Control + arrows select the desired language of Eloquence…


Rui Fontes

 

 

De: nvda@nvda.groups.io <nvda@nvda.groups.io> Em Nome De Robert Doc Wright godfearer
Enviada: terça-feira, 7 de janeiro de 2020 18:30
Para: nvda@nvda.groups.io
Assunto: Re: [nvda] Code Factory eloquence

 

Its not showing up anywhere but the icon on the desktop. When I open it it puts me in settings which says nothing about which screen reader you wish to use with it.

 

******

character is found in how you treat people who cannot do anything for you!                                                                       

 

From: Chris Mullins
Sent: Tuesday, January 7, 2020 11:26 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory eloquence

 

Hi

Use NVDA+Control+s to open the synthesizer dialog, see if it is

listed, select it and Ok the dialog.  Then use NVDA+Control+v to

adjust the voice settings.

 

Cheers

Chris

 

On 07/01/2020, David Griffith <daj.griffith@...> wrote:

> Did you purchase the Sapi 5 version or the NVDA addon?

> Others may know better as I have no direct experience but I think there may

> be issues with associating the correct version of the addon version with the

> version of NVDA you are using.

> That as I understand it  from other discussions the latest addon version is

> designed for NVDA 19.3  and not 19.2.

> If you are still running 19.2  I think you may possibly need the previous

> addon version.

> This is all a little confusing as, as far as I understand it 19.3 is still

> in beta and not officially released yet.

> Personally I always use Sapi 5  versions and avoid using addon synthesisers

> to avoid these and other complications.

> David Griffith

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Robert Doc

> Wright godfearer

> Sent: 07 January 2020 18:13

> To: nvda@nvda.groups.io

> Subject: [nvda] Code Factory eloquence

> I just purchased, installed and registered eloquence. How do I get NVDA to

> use it?

> ******

> character is found in how you treat people who cannot do anything for you!

>

 

 

 

Re: Code Factory eloquence

Sam Bushman
 

Hi Rui/All,

 

I currently have the NVDA latest version of ellequence.

Does the beta of the NVDA Ellequence plugin work with the beta 19.3 beta 1 work well yet?

 

Thanks,

Sam

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Rui Fontes
Sent: Tuesday, January 7, 2020 11:48 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory eloquence

 

Hello!

 

You have bought the SAPI5 version of Eloquence.

 

So, in the synths list of NVDA you should choose Microsoft Speech API 5 and then with NVDA+Control + arrows select the desired language of Eloquence…


Rui Fontes

 

 

De: nvda@nvda.groups.io <nvda@nvda.groups.io> Em Nome De Robert Doc Wright godfearer
Enviada: terça-feira, 7 de janeiro de 2020 18:30
Para: nvda@nvda.groups.io
Assunto: Re: [nvda] Code Factory eloquence

 

Its not showing up anywhere but the icon on the desktop. When I open it it puts me in settings which says nothing about which screen reader you wish to use with it.

 

******

character is found in how you treat people who cannot do anything for you!                                                                       

 

From: Chris Mullins
Sent: Tuesday, January 7, 2020 11:26 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory eloquence

 

Hi

Use NVDA+Control+s to open the synthesizer dialog, see if it is

listed, select it and Ok the dialog.  Then use NVDA+Control+v to

adjust the voice settings.

 

Cheers

Chris

 

On 07/01/2020, David Griffith <daj.griffith@...> wrote:

> Did you purchase the Sapi 5 version or the NVDA addon?

> Others may know better as I have no direct experience but I think there may

> be issues with associating the correct version of the addon version with the

> version of NVDA you are using.

> That as I understand it  from other discussions the latest addon version is

> designed for NVDA 19.3  and not 19.2.

> If you are still running 19.2  I think you may possibly need the previous

> addon version.

> This is all a little confusing as, as far as I understand it 19.3 is still

> in beta and not officially released yet.

> Personally I always use Sapi 5  versions and avoid using addon synthesisers

> to avoid these and other complications.

> David Griffith

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Robert Doc

> Wright godfearer

> Sent: 07 January 2020 18:13

> To: nvda@nvda.groups.io

> Subject: [nvda] Code Factory eloquence

> I just purchased, installed and registered eloquence. How do I get NVDA to

> use it?

> ******

> character is found in how you treat people who cannot do anything for you!

>

 

 

 

Re: Code Factory eloquence

Rui Fontes
 

Hello!

 

You have bought the SAPI5 version of Eloquence.

 

So, in the synths list of NVDA you should choose Microsoft Speech API 5 and then with NVDA+Control + arrows select the desired language of Eloquence…


Rui Fontes

 

 

De: nvda@nvda.groups.io <nvda@nvda.groups.io> Em Nome De Robert Doc Wright godfearer
Enviada: terça-feira, 7 de janeiro de 2020 18:30
Para: nvda@nvda.groups.io
Assunto: Re: [nvda] Code Factory eloquence

 

Its not showing up anywhere but the icon on the desktop. When I open it it puts me in settings which says nothing about which screen reader you wish to use with it.

 

******

character is found in how you treat people who cannot do anything for you!                                                                       

 

From: Chris Mullins
Sent: Tuesday, January 7, 2020 11:26 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory eloquence

 

Hi

Use NVDA+Control+s to open the synthesizer dialog, see if it is

listed, select it and Ok the dialog.  Then use NVDA+Control+v to

adjust the voice settings.

 

Cheers

Chris

 

On 07/01/2020, David Griffith <daj.griffith@...> wrote:

> Did you purchase the Sapi 5 version or the NVDA addon?

> Others may know better as I have no direct experience but I think there may

> be issues with associating the correct version of the addon version with the

> version of NVDA you are using.

> That as I understand it  from other discussions the latest addon version is

> designed for NVDA 19.3  and not 19.2.

> If you are still running 19.2  I think you may possibly need the previous

> addon version.

> This is all a little confusing as, as far as I understand it 19.3 is still

> in beta and not officially released yet.

> Personally I always use Sapi 5  versions and avoid using addon synthesisers

> to avoid these and other complications.

> David Griffith

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Robert Doc

> Wright godfearer

> Sent: 07 January 2020 18:13

> To: nvda@nvda.groups.io

> Subject: [nvda] Code Factory eloquence

> I just purchased, installed and registered eloquence. How do I get NVDA to

> use it?

> ******

> character is found in how you treat people who cannot do anything for you!

>

 

 

 

Re: Code Factory eloquence

Chris
 

Try restarting NVDA then check to see if it shows in speech settings

 

From: Robert Doc Wright godfearer
Sent: 07 January 2020 18:30
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory eloquence

 

Its not showing up anywhere but the icon on the desktop. When I open it it puts me in settings which says nothing about which screen reader you wish to use with it.

 

******

character is found in how you treat people who cannot do anything for you!                                                                       

 

From: Chris Mullins
Sent: Tuesday, January 7, 2020 11:26 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory eloquence

 

Hi

Use NVDA+Control+s to open the synthesizer dialog, see if it is

listed, select it and Ok the dialog.  Then use NVDA+Control+v to

adjust the voice settings.

 

Cheers

Chris

 

On 07/01/2020, David Griffith <daj.griffith@...> wrote:

> Did you purchase the Sapi 5 version or the NVDA addon?

> Others may know better as I have no direct experience but I think there may

> be issues with associating the correct version of the addon version with the

> version of NVDA you are using.

> That as I understand it  from other discussions the latest addon version is

> designed for NVDA 19.3  and not 19.2.

> If you are still running 19.2  I think you may possibly need the previous

> addon version.

> This is all a little confusing as, as far as I understand it 19.3 is still

> in beta and not officially released yet.

> Personally I always use Sapi 5  versions and avoid using addon synthesisers

> to avoid these and other complications.

> David Griffith

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Robert Doc

> Wright godfearer

> Sent: 07 January 2020 18:13

> To: nvda@nvda.groups.io

> Subject: [nvda] Code Factory eloquence

> I just purchased, installed and registered eloquence. How do I get NVDA to

> use it?

> ******

> character is found in how you treat people who cannot do anything for you!

>

 

 

 

 

Re: Code Factory eloquence

Chris Mullins
 

Hi
Does it use an NVDA add-on and if so, is that installeed?

Cheers
Chris

On 07/01/2020, Robert Doc Wright godfearer <godfearer@...> wrote:
I just purchased, installed and registered eloquence. How do I get NVDA to
use it?

******
character is found in how you treat people who cannot do anything for
you!





Re: Code Factory eloquence

Robert Doc Wright godfearer
 

Its not showing up anywhere but the icon on the desktop. When I open it it puts me in settings which says nothing about which screen reader you wish to use with it.

 

******

character is found in how you treat people who cannot do anything for you!                                                                       

 

From: Chris Mullins
Sent: Tuesday, January 7, 2020 11:26 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory eloquence

 

Hi

Use NVDA+Control+s to open the synthesizer dialog, see if it is

listed, select it and Ok the dialog.  Then use NVDA+Control+v to

adjust the voice settings.

 

Cheers

Chris

 

On 07/01/2020, David Griffith <daj.griffith@...> wrote:

> Did you purchase the Sapi 5 version or the NVDA addon?

> Others may know better as I have no direct experience but I think there may

> be issues with associating the correct version of the addon version with the

> version of NVDA you are using.

> That as I understand it  from other discussions the latest addon version is

> designed for NVDA 19.3  and not 19.2.

> If you are still running 19.2  I think you may possibly need the previous

> addon version.

> This is all a little confusing as, as far as I understand it 19.3 is still

> in beta and not officially released yet.

> Personally I always use Sapi 5  versions and avoid using addon synthesisers

> to avoid these and other complications.

> David Griffith

> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Robert Doc

> Wright godfearer

> Sent: 07 January 2020 18:13

> To: nvda@nvda.groups.io

> Subject: [nvda] Code Factory eloquence

> I just purchased, installed and registered eloquence. How do I get NVDA to

> use it?

> ******

> character is found in how you treat people who cannot do anything for you!

>

 

 

 

Re: Code Factory eloquence

Chris
 

You will have to go to the NVDA preferences > settings > speech and change the synth to the code factory synth

 

 

From: Robert Doc Wright godfearer
Sent: 07 January 2020 18:13
To: nvda@nvda.groups.io
Subject: [nvda] Code Factory eloquence

 

I just purchased, installed and registered eloquence. How do I get NVDA to use it?

 

******

character is found in how you treat people who cannot do anything for you!                                                                       

 

 

Re: Code Factory eloquence

Robert Doc Wright godfearer
 

I did not see any choices.

 

******

character is found in how you treat people who cannot do anything for you!                                                                       

 

From: David Griffith
Sent: Tuesday, January 7, 2020 11:24 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Code Factory eloquence

 

Did you purchase the Sapi 5 version or the NVDA addon?

Others may know better as I have no direct experience but I think there may be issues with associating the correct version of the addon version with the version of NVDA you are using.

That as I understand it  from other discussions the latest addon version is designed for NVDA 19.3  and not 19.2.

If you are still running 19.2  I think you may possibly need the previous addon version.

 

This is all a little confusing as, as far as I understand it 19.3 is still in beta and not officially released yet.

 

Personally I always use Sapi 5  versions and avoid using addon synthesisers to avoid these and other complications.

 

David Griffith

 

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Robert Doc Wright godfearer
Sent: 07 January 2020 18:13
To: nvda@nvda.groups.io
Subject: [nvda] Code Factory eloquence

 

I just purchased, installed and registered eloquence. How do I get NVDA to use it?

 

******

character is found in how you treat people who cannot do anything for you!                                                                       

 

 

Re: Code Factory eloquence

Chris Mullins
 

Hi
Use NVDA+Control+s to open the synthesizer dialog, see if it is
listed, select it and Ok the dialog. Then use NVDA+Control+v to
adjust the voice settings.

Cheers
Chris

On 07/01/2020, David Griffith <daj.griffith@...> wrote:
Did you purchase the Sapi 5 version or the NVDA addon?

Others may know better as I have no direct experience but I think there may
be issues with associating the correct version of the addon version with the
version of NVDA you are using.

That as I understand it from other discussions the latest addon version is
designed for NVDA 19.3 and not 19.2.

If you are still running 19.2 I think you may possibly need the previous
addon version.



This is all a little confusing as, as far as I understand it 19.3 is still
in beta and not officially released yet.



Personally I always use Sapi 5 versions and avoid using addon synthesisers
to avoid these and other complications.



David Griffith







From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Robert Doc
Wright godfearer
Sent: 07 January 2020 18:13
To: nvda@nvda.groups.io
Subject: [nvda] Code Factory eloquence



I just purchased, installed and registered eloquence. How do I get NVDA to
use it?



******

character is found in how you treat people who cannot do anything for you!








Re: Code Factory eloquence

David Griffith
 

Did you purchase the Sapi 5 version or the NVDA addon?

Others may know better as I have no direct experience but I think there may be issues with associating the correct version of the addon version with the version of NVDA you are using.

That as I understand it  from other discussions the latest addon version is designed for NVDA 19.3  and not 19.2.

If you are still running 19.2  I think you may possibly need the previous addon version.

 

This is all a little confusing as, as far as I understand it 19.3 is still in beta and not officially released yet.

 

Personally I always use Sapi 5  versions and avoid using addon synthesisers to avoid these and other complications.

 

David Griffith

 

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Robert Doc Wright godfearer
Sent: 07 January 2020 18:13
To: nvda@nvda.groups.io
Subject: [nvda] Code Factory eloquence

 

I just purchased, installed and registered eloquence. How do I get NVDA to use it?

 

******

character is found in how you treat people who cannot do anything for you!