Reader mode in Chrome?
Gerardo Corripio
Using latest NVDA 2019.2.1 with latest Google Chrome, is there a command to into Reader mode, like yu can with iOS on the iPHone?
Gera Enviado desde mi iPhone SE de Telcel
|
|
Re: edge showstopper maybe
Arlene
H! Now if Edge has office apps you can work with off line. That, I would like if I was in a situation where there’s no wifi! Sarah, I did get the new edge. If you use Chrome. I find Edge is the same. I’ll play around with it later. Like Chrome it’s responsive quicker then IE. What I do not like, you have Bing shoved at you.
Sent from Mail for Windows 10
From: Shaun Everiss
Sent: January 16, 2020 11:03 AM To: nvda@nvda.groups.io Subject: Re: [nvda] edge showstopper maybe
Well I am tryin to improve. As for edge, it seems a mixed bad, I can't say I am total surprised but I was expecting better, just a little. Edge has been configured. For those that see office there are web apps which are sites in edge that can do things offline. Edge it self does try to explain better than I am. You can uninstall those to. Once you link everything via your microsoft account on edge, your settings should stay so no need to reset.
On 16/01/2020 6:39 pm, Sarah k Alawami wrote:
|
|
Re: Unread/Read Status of Messages Broken In Thunderbird With 2019.3 Beta 2
hurrikennyandopo ...
Hi
toggle quoted messageShow quoted text
What have you got your message time out set to? Mine is set to 5 seconds otherwise I think they show as read. In mozilla thunder bird go to tools then options then display then advanced then under there is a setting to change your time out of your messages. You might have to tab or arrow around to find it to change it. Mine here reads the unread message as it status until I open it. I think there was a setting in thunder bird so it could also save replied etc but would have to look as have not used it for a long time. Gene nz
On 17/01/2020 3:42 am, Ron Canazzi wrote:
Hi Clive,
|
|
Re: edge showstopper maybe
Well I am tryin to improve. As for edge, it seems a mixed bad, I can't say I am total surprised but I was expecting better, just a little. Edge has been configured. For those that see office there are web apps which are sites in edge that can do things offline. Edge it self does try to explain better than I am. You can uninstall those to. Once you link everything via your microsoft account on edge, your settings should stay so no need to reset.
On 16/01/2020 6:39 pm, Sarah k Alawami
wrote:
|
|
Re: Problems w/single key navigation
Jonathan COHN
Also, just to be sure. You are already running NVDA when you start the browser right? Browsers check for AT products on launch and only enable their acessibility layer when they detect a screen reader.
Jonathan
|
|
Re: BARD Express with NVDA still don’t get along fully
It works with Narrator in advanced mode but you have to navigate to the annotation column each and every time. Narrator won't read the other columns automatically like NVDA and JAWS will but it will read the full column in advanced mode.
|
|
Re: screen search
Gene
This is the page. You can read about the
add-on and get the version you want.
Gene
----- Original Message -----
From: Chikodinaka mr. Oguledo
Sent: Thursday, January 16, 2020 7:00 AM
Subject: Re: [nvda] screen search On 1/16/20, Gene <gsasner@...> wrote: > A screen search is using something such as in JAWS, the JAWS cursor to > search the current screen. NVDA has no way to do this without using an > add-on, but there is an add-on that allows you to virtualize the current > window and thus, search the screen using the NVDA search command, control > NVDA key f in desktop layout. I don't know the laptop layout. > > I don't know the answer to the original question. I played with the add-on > briefly and I didn't see such an option, but also, I wasn't looking, though > I doubt it's there. I would suggest keeping a record in something like > Notepad of previous search strings. You may have to type them manually > there, but that may be the only way to do what you want to do. > > Gene > ----- Original Message ----- > From: hurrikennyandopo ... > Sent: Wednesday, January 15, 2020 10:35 PM > To: nvda@nvda.groups.io > Subject: Re: [nvda] screen search > > > Hi > > > > > What do you mean by screen search. > > > > > You do not mean like do a search of a web page? > > > > > If that is the case use the nvda key + ctrl key + the letter f when the > dialogue box comes up enter in your search term. there is also a combo box > that will tell you your last 20 searches etc Can not remember if they can be > saved? > > > > > Gene nz > > > > > On 16/01/2020 12:02 pm, Darren Harris via Groups.Io wrote: > > Hi all, > > > > Is there a way of using nvda to do a screen search whereby you can also > store multiple search strings so you can access them at any given time? > > > > >
|
|
Re: BARD Express with NVDA still don’t get along fully
Dave Grossoehme
Good Day: Does it work with Narrator?
toggle quoted messageShow quoted text
Dave
On 1/8/2020 6:50 AM, Gerardo Corripio wrote:
I updated my Bard Express to version2, thus I was hoping that in this new version, the issue in where the NVDA screen reader would read the entirety of the book information when on lists of books, would get resolved, but sadly it’s the same; it only reads the first few lines of the annotation. Browsing through the BARD Express View menu, I saw an item something about Screen Readers, whose shortcut is alt+q, but no go either! Whose fault is it that NVDA doesn’t get along as other screen readers with Bard Express? not everyone of us have the means to get Jaws; also as the years have gone by, the NVDA screen reader has been maturing to the point, where me personally, I enjoy using it, thus I feel that no matter which screen reader being used, we should be able to work with the same efficiency with the BARD Express app.
|
|
can't stream this month's magazine on the talking computers site using edge
Rosemarie Chavarria
Hi, everyone,
Now that I've turned off the ui automation, edge works greats with NVDA but I can't stream this month's magine on the talking computer site. When I hit shift f-6 to try to open the music file, I get amazon instead. How do I correct this problem?
Thanks for your help in advance.
Rosemarie
|
|
Re: NVDA and express vpn
Did you try Tunnel Bear?
toggle quoted messageShow quoted text
73 N2DYN Angelo
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Vlad Dragomir Sent: Thursday, January 16, 2020 11:42 AM To: nvda@nvda.groups.io Subject: Re: [nvda] NVDA and express vpn Hi again, Welcome to the club! I tried the same with HMA VPN, ExpressVPN, IP Vanish, and a few others. The best I got is: "This might take a while". Of course "a while" turned out to be more than a year with no change at all. At least if they could be honest and admit that they simply don't care about accessibility, it would make our lives a little easier. *smile* The fight continues! Best, Vlad.
|
|
Re: NVDA and express vpn
Vlad Dragomir
Hi again,
Welcome to the club! I tried the same with HMA VPN, ExpressVPN, IP Vanish, and a few others. The best I got is: "This might take a while". Of course "a while" turned out to be more than a year with no change at all. At least if they could be honest and admit that they simply don't care about accessibility, it would make our lives a little easier. *smile* The fight continues! Best, Vlad.
|
|
Re: Problems w/single key navigation
Hi, Sounds like NVDA isn’t recognizing web content as proper browse mode document. One way to resolve this is running COM Registration Tool: NVDA menu/Tools/Run COM Registration Fixing tool. If things go well, browse mode should work again in web browsers. Cheers, Joseph
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Greg Rhodes
Sent: Thursday, January 16, 2020 7:47 AM To: NVDA Users Group <nvda@nvda.groups.io> Subject: [nvda] Problems w/single key navigation
I’m running the latest version of Windows 1903 and I believe the latest version of NVDA. Single key navigation does not work for me in the Google Chrome or Firefox web browsers. I therefore was using Edge. When I downloaded the new Edge browser yesterday, single key navigation stopped working in Edge. Now I have no browsers where I can use single key navigagation. Can’t get it to work with NVDA or Narrator. Computer geeks tell me it must be a screen reader issue. Can anyone out there help? Is there a Windows 10 or screen reader setting that should be turned on or off to enable single key navigation. FYI, single key navigation does work for me in MS Word. Thanks.
Greg
|
|
Problems w/single key navigation
Greg Rhodes
I’m running the latest version of Windows 1903 and I believe the latest version of NVDA. Single key navigation does not work for me in the Google Chrome or Firefox web browsers. I therefore was using Edge. When I downloaded the new Edge browser yesterday, single key navigation stopped working in Edge. Now I have no browsers where I can use single key navigagation. Can’t get it to work with NVDA or Narrator. Computer geeks tell me it must be a screen reader issue. Can anyone out there help? Is there a Windows 10 or screen reader setting that should be turned on or off to enable single key navigation. FYI, single key navigation does work for me in MS Word. Thanks.
Greg
|
|
Re: screen search again
Hi, NVDA’s find dialog is limited to places where browse mode can be invoked. As for search history, the issue I mentioned may have to do with the GUI toolkit we are using (NVDA is powered by wxPython, the Python implementation of wxWidgets). Also, note that NVDA isn’t an English screen reader – it is used by thousands in different languages, hence if something goes odd in one input system for a language, it will lead to decisions (in some cases) to pull a feature from release until a better solution is found (such is the case with search history). Cheers, Joseph
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Darren Harris via Groups.Io
Sent: Thursday, January 16, 2020 7:38 AM To: nvda@nvda.groups.io Subject: Re: [nvda] screen search again
Well, window eyes had this functionality as standard. So I don’t really see what’s so different here?
|
|
Re: edge showstopper maybe
Davy Cuppens
If you want stable software, never mess with betas whatever software it is.
What do you mean by not stable? Not all
add-ons working with it isn't a matter of stability. it is a matter of
compatibility and probably has to do with those add-ons not yet being
compatible. but it is likely stable in that it works properly in general
and doesn't crash more than a stable program does.
I haven't tried it but in the past, I have found
NVDA betas to generally be stable.
Gene
----- Original message -----
From: Shaun Everiss
Sent: Wednesday, January 15, 2020 12:30 PM
Subject: Re: [nvda] edge showstopper maybe And there we have a problem joseph. 2019.3 is not stable yet. Not all addons I use work with it just yet. If it comes I will have to set it up with narator. I may try later on today to do this again because I have all the cloud boxes here. Is there a standalone installer for edge like there is with chrome? On 16/01/2020 6:57 am, Joseph Lee wrote: > Hi, > You need to use NVDA 2019.3 beta 2 or later. > Cheers, > Joseph > > -----Original Message----- > From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Shaun Everiss > Sent: Wednesday, January 15, 2020 9:53 AM > To: nvda@nvda.groups.io > Subject: [nvda] edge showstopper maybe > > Hi. > > There are a few big issues. > > I was moving round setting things up and nvda froze up completely and I had to restart it > > INFO - _UIAHandler.UIAHandler.MTAThreadFunc (03:58:43.407): > UIAutomation: IUIAutomation6 > INFO - core.main (03:58:44.369): > NVDA initialized > ERROR - NVDAObjects.behaviors.LiveText._monitor (03:58:45.331): > Error getting initial lines > Traceback (most recent call last): > File "NVDAObjects\behaviors.pyo", line 270, in _monitor > File "NVDAObjects\window\winConsole.pyo", line 54, in _getTextLines > File "winConsoleHandler.pyo", line 126, in getConsoleVisibleLines > File "wincon.pyo", line 75, in GetConsoleScreenBufferInfo > WindowsError: [Error 6] The handle is invalid. > ERROR - eventHandler.executeEvent (06:35:56.948): > error executing event: gainFocus on > <NVDAObjects.Dynamic_EditableTextWithoutAutoSelectDetectionUIA object at > 0x05A68690> with extra args of {} > Traceback (most recent call last): > File "eventHandler.pyo", line 155, in executeEvent > File "eventHandler.pyo", line 92, in __init__ > File "eventHandler.pyo", line 100, in next > File > "C:\Users\shaun\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easyTableNavigator.py", > line 82, in event_gainFocus > File "eventHandler.pyo", line 100, in next > File "NVDAObjects\__init__.pyo", line 1030, in event_gainFocus > File "NVDAObjects\__init__.pyo", line 918, in reportFocus > File "speech.pyo", line 432, in speakObject > File "speech.pyo", line 820, in speakTextInfo > File "NVDAObjects\UIA\__init__.pyo", line 646, in getTextWithFields > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 598, in _getTextWithFieldsForUIARange > COMError: (-2146233079, None, (None, None, None, 0, None)) ERROR - eventHandler.executeEvent (06:36:24.200): > error executing event: gainFocus on > <NVDAObjects.Dynamic_EditableTextWithoutAutoSelectDetectionUIA object at > 0x05BEFD50> with extra args of {} > Traceback (most recent call last): > File "eventHandler.pyo", line 155, in executeEvent > File "eventHandler.pyo", line 92, in __init__ > File "eventHandler.pyo", line 100, in next > File > "C:\Users\shaun\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easyTableNavigator.py", > line 82, in event_gainFocus > File "eventHandler.pyo", line 100, in next > File "NVDAObjects\__init__.pyo", line 1030, in event_gainFocus > File "NVDAObjects\__init__.pyo", line 918, in reportFocus > File "speech.pyo", line 432, in speakObject > File "speech.pyo", line 820, in speakTextInfo > File "NVDAObjects\UIA\__init__.pyo", line 646, in getTextWithFields > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 598, in _getTextWithFieldsForUIARange > COMError: (-2146233079, None, (None, None, None, 0, None)) ERROR - eventHandler.executeEvent (06:37:14.160): > error executing event: gainFocus on > <NVDAObjects.Dynamic_EditableTextWithoutAutoSelectDetectionUIA object at > 0x0573D2D0> with extra args of {} > Traceback (most recent call last): > File "eventHandler.pyo", line 155, in executeEvent > File "eventHandler.pyo", line 92, in __init__ > File "eventHandler.pyo", line 100, in next > File > "C:\Users\shaun\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easyTableNavigator.py", > line 82, in event_gainFocus > File "eventHandler.pyo", line 100, in next > File "NVDAObjects\__init__.pyo", line 1030, in event_gainFocus > File "NVDAObjects\__init__.pyo", line 918, in reportFocus > File "speech.pyo", line 432, in speakObject > File "speech.pyo", line 820, in speakTextInfo > File "NVDAObjects\UIA\__init__.pyo", line 646, in getTextWithFields > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 598, in _getTextWithFieldsForUIARange > COMError: (-2146233079, None, (None, None, None, 0, None)) WARNING - watchdog._watcher (06:39:04.387): > Core frozen in stack: > File "nvda.pyw", line 231, in <module> > File "core.pyo", line 519, in main > File "wx\core.pyo", line 2134, in MainLoop > File "gui\__init__.pyo", line 1003, in Notify > File "core.pyo", line 490, in run > File "queueHandler.pyo", line 86, in pumpAll > File "queueHandler.pyo", line 53, in flushQueue > File "eventHandler.pyo", line 62, in _queueEventCallback > File "eventHandler.pyo", line 155, in executeEvent > File "eventHandler.pyo", line 92, in __init__ > File "eventHandler.pyo", line 100, in next > File > "C:\Users\shaun\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easyTableNavigator.py", > line 82, in event_gainFocus > File "eventHandler.pyo", line 100, in next > File "NVDAObjects\__init__.pyo", line 1030, in event_gainFocus > File "NVDAObjects\__init__.pyo", line 918, in reportFocus > File "speech.pyo", line 432, in speakObject > File "speech.pyo", line 820, in speakTextInfo > File "NVDAObjects\UIA\__init__.pyo", line 646, in getTextWithFields > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 628, in _getTextWithFieldsForUIARange > > WARNING - watchdog._watcher (06:39:19.440): > Core frozen in stack: > File "nvda.pyw", line 231, in <module> > File "core.pyo", line 519, in main > File "wx\core.pyo", line 2134, in MainLoop > File "gui\__init__.pyo", line 1003, in Notify > File "core.pyo", line 490, in run > File "queueHandler.pyo", line 86, in pumpAll > File "queueHandler.pyo", line 53, in flushQueue > File "eventHandler.pyo", line 62, in _queueEventCallback > File "eventHandler.pyo", line 155, in executeEvent > File "eventHandler.pyo", line 92, in __init__ > File "eventHandler.pyo", line 100, in next > File > "C:\Users\shaun\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easyTableNavigator.py", > line 82, in event_gainFocus > File "eventHandler.pyo", line 100, in next > File "NVDAObjects\__init__.pyo", line 1030, in event_gainFocus > File "NVDAObjects\__init__.pyo", line 918, in reportFocus > File "speech.pyo", line 432, in speakObject > File "speech.pyo", line 820, in speakTextInfo > File "NVDAObjects\UIA\__init__.pyo", line 646, in getTextWithFields > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 628, in _getTextWithFieldsForUIARange > > WARNING - watchdog._watcher (06:39:34.496): > Core frozen in stack: > File "nvda.pyw", line 231, in <module> > File "core.pyo", line 519, in main > File "wx\core.pyo", line 2134, in MainLoop > File "gui\__init__.pyo", line 1003, in Notify > File "core.pyo", line 490, in run > File "queueHandler.pyo", line 86, in pumpAll > File "queueHandler.pyo", line 53, in flushQueue > File "eventHandler.pyo", line 62, in _queueEventCallback > File "eventHandler.pyo", line 155, in executeEvent > File "eventHandler.pyo", line 92, in __init__ > File "eventHandler.pyo", line 100, in next > File > "C:\Users\shaun\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easyTableNavigator.py", > line 82, in event_gainFocus > File "eventHandler.pyo", line 100, in next > File "NVDAObjects\__init__.pyo", line 1030, in event_gainFocus > File "NVDAObjects\__init__.pyo", line 918, in reportFocus > File "speech.pyo", line 432, in speakObject > File "speech.pyo", line 820, in speakTextInfo > File "NVDAObjects\UIA\__init__.pyo", line 646, in getTextWithFields > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 590, in _getTextWithFieldsForUIARange > > WARNING - watchdog._watcher (06:39:49.542): > Core frozen in stack: > File "nvda.pyw", line 231, in <module> > File "core.pyo", line 519, in main > File "wx\core.pyo", line 2134, in MainLoop > File "gui\__init__.pyo", line 1003, in Notify > File "core.pyo", line 490, in run > File "queueHandler.pyo", line 86, in pumpAll > File "queueHandler.pyo", line 53, in flushQueue > File "eventHandler.pyo", line 62, in _queueEventCallback > File "eventHandler.pyo", line 155, in executeEvent > File "eventHandler.pyo", line 92, in __init__ > File "eventHandler.pyo", line 100, in next > File > "C:\Users\shaun\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easyTableNavigator.py", > line 82, in event_gainFocus > File "eventHandler.pyo", line 100, in next > File "NVDAObjects\__init__.pyo", line 1030, in event_gainFocus > File "NVDAObjects\__init__.pyo", line 918, in reportFocus > File "speech.pyo", line 432, in speakObject > File "speech.pyo", line 820, in speakTextInfo > File "NVDAObjects\UIA\__init__.pyo", line 646, in getTextWithFields > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 628, in _getTextWithFieldsForUIARange > > WARNING - watchdog._watcher (06:40:04.601): > Core frozen in stack: > File "nvda.pyw", line 231, in <module> > File "core.pyo", line 519, in main > File "wx\core.pyo", line 2134, in MainLoop > File "gui\__init__.pyo", line 1003, in Notify > File "core.pyo", line 490, in run > File "queueHandler.pyo", line 86, in pumpAll > File "queueHandler.pyo", line 53, in flushQueue > File "eventHandler.pyo", line 62, in _queueEventCallback > File "eventHandler.pyo", line 155, in executeEvent > File "eventHandler.pyo", line 92, in __init__ > File "eventHandler.pyo", line 100, in next > File > "C:\Users\shaun\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easyTableNavigator.py", > line 82, in event_gainFocus > File "eventHandler.pyo", line 100, in next > File "NVDAObjects\__init__.pyo", line 1030, in event_gainFocus > File "NVDAObjects\__init__.pyo", line 918, in reportFocus > File "speech.pyo", line 432, in speakObject > File "speech.pyo", line 820, in speakTextInfo > File "NVDAObjects\UIA\__init__.pyo", line 646, in getTextWithFields > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange > File "NVDAObjects\UIA\__init__.pyo", line 628, in _getTextWithFieldsForUIARange I got this when I restarted the brouser. > > WARNING - watchdog._watcher (06:49:02.773): > Core frozen in stack: > File "nvda.pyw", line 231, in <module> > File "core.pyo", line 519, in main > File "wx\core.pyo", line 2134, in MainLoop > File "gui\__init__.pyo", line 1003, in Notify > File "core.pyo", line 490, in run > File "queueHandler.pyo", line 86, in pumpAll > File "queueHandler.pyo", line 53, in flushQueue > File "eventHandler.pyo", line 62, in _queueEventCallback > File "eventHandler.pyo", line 155, in executeEvent > File "eventHandler.pyo", line 92, in __init__ > File "eventHandler.pyo", line 100, in next > File > "C:\Users\shaun\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easyTableNavigator.py", > line 82, in event_gainFocus > File "eventHandler.pyo", line 100, in next > File "NVDAObjects\__init__.pyo", line 1030, in event_gainFocus > File "NVDAObjects\__init__.pyo", line 918, in reportFocus > File "speech.pyo", line 416, in speakObject > File "speech.pyo", line 289, in speakObjectProperties > File "baseObject.pyo", line 47, in __get__ > File "baseObject.pyo", line 147, in _getPropertyViaCache > File "NVDAObjects\UIA\__init__.pyo", line 1090, in _get_keyboardShortcut > File "NVDAObjects\UIA\__init__.pyo", line 744, in _getUIACacheablePropertyValue > > WARNING - watchdog._watcher (06:49:17.822): > Core frozen in stack: > File "nvda.pyw", line 231, in <module> > File "core.pyo", line 519, in main > File "wx\core.pyo", line 2134, in MainLoop > File "gui\__init__.pyo", line 1003, in Notify > File "core.pyo", line 490, in run > File "queueHandler.pyo", line 86, in pumpAll > File "queueHandler.pyo", line 53, in flushQueue > File "eventHandler.pyo", line 62, in _queueEventCallback > File "eventHandler.pyo", line 155, in executeEvent > File "eventHandler.pyo", line 92, in __init__ > File "eventHandler.pyo", line 100, in next > File > "C:\Users\shaun\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easyTableNavigator.py", > line 82, in event_gainFocus > File "eventHandler.pyo", line 100, in next > File "NVDAObjects\__init__.pyo", line 1030, in event_gainFocus > File "NVDAObjects\__init__.pyo", line 918, in reportFocus > File "speech.pyo", line 416, in speakObject > File "speech.pyo", line 289, in speakObjectProperties > File "baseObject.pyo", line 47, in __get__ > File "baseObject.pyo", line 147, in _getPropertyViaCache > File "NVDAObjects\UIA\__init__.pyo", line 1090, in _get_keyboardShortcut > File "NVDAObjects\UIA\__init__.pyo", line 744, in _getUIACacheablePropertyValue > > WARNING - watchdog._watcher (06:49:32.858): > Core frozen in stack: > File "nvda.pyw", line 231, in <module> > File "core.pyo", line 519, in main > File "wx\core.pyo", line 2134, in MainLoop > File "gui\__init__.pyo", line 1003, in Notify > File "core.pyo", line 490, in run > File "queueHandler.pyo", line 86, in pumpAll > File "queueHandler.pyo", line 53, in flushQueue > File "eventHandler.pyo", line 62, in _queueEventCallback > File "eventHandler.pyo", line 155, in executeEvent > File "eventHandler.pyo", line 92, in __init__ > File "eventHandler.pyo", line 100, in next > File > "C:\Users\shaun\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easyTableNavigator.py", > line 82, in event_gainFocus > File "eventHandler.pyo", line 100, in next > File "NVDAObjects\__init__.pyo", line 1030, in event_gainFocus > File "NVDAObjects\__init__.pyo", line 918, in reportFocus > File "speech.pyo", line 416, in speakObject > File "speech.pyo", line 289, in speakObjectProperties > File "baseObject.pyo", line 47, in __get__ > File "baseObject.pyo", line 147, in _getPropertyViaCache > File "NVDAObjects\UIA\__init__.pyo", line 1090, in _get_keyboardShortcut > File "NVDAObjects\UIA\__init__.pyo", line 744, in _getUIACacheablePropertyValue Based on this, and even though I can get this right now I am going to uninstall it and wait. > > It looks like you can uninstall anyway. > > > > > > > > > >
|
|
Re: screen search again
Darren Harris
Well, window eyes had this functionality as standard. So I don’t really see what’s so different here?
toggle quoted messageShow quoted text
On 16 Jan 2020, at 15:29, Joseph Lee <joseph.lee22590@...> wrote:
|
|
Re: screen search again
Hi, A few months ago the combo box you are talking about (search history) did exist under development snapshots. However it was found that it didn’t allow people typing in Chinese, Japanese, Korean and additional languages to perform searches (or rather, delete search texts being typed). As a result, search history was removed. Cheers, Joseph
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Darren Harris via Groups.Io
Sent: Thursday, January 16, 2020 12:19 AM To: nvda@nvda.groups.io Subject: [nvda] screen search again
Ok so I tried the incert ctrl plus f command. That works but if there’s a combo box to show previous search strings I can’t seem to find them.
Any help here?
|
|
Re: NVDA and express vpn
Lenron
I just wish these companies wanted to make the apps accessible. I have
toggle quoted messageShow quoted text
emailed and chatted with support from express VPN but got nowhere.
On 1/15/20, Mobeen Iqbal <mobeeniqbal@gmail.com> wrote:
I never use the bundled VPN apps as they can be rendered inaccessible --
Lenron Brown Cell: 985-271-2832 Skype: ron.brown762
|
|
Re: How does One Know What Version of nvda we are running?
Chris
If you press nvda key+N Arrow down to help Then arrow up to about and press enter The version info is there
From: Martin McCormick
Sent: 16 January 2020 14:39 To: nvda@nvda.groups.io Subject: [nvda] How does One Know What Version of nvda we are running?
The Subject is the message. Thank you.
Martin McCormick
|
|
Re: How does One Know What Version of nvda we are running?
Jackie
NVDA key+n > help > about.
toggle quoted messageShow quoted text
On 1/16/20, Martin McCormick <martin.m@suddenlink.net> wrote:
The Subject is the message. Thank you. --
Subscribe to a WordPress for Newbies Mailing List by sending a message to: wp4newbs-request@freelists.org with 'subscribe' in the Subject field OR by visiting the list page at http://www.freelists.org/list/wp4newbs & check out my sites at www.brighter-vision.com & www.mysitesbeenhacked.com
|
|