Date   
issue with share point

Surendra JUJJAVARAPU
 

Dear All,

I am facing a issue with share point in, when i opened any page in classic view. when i press quick edit most of the time the nvda jis not speaking, please give a solution to it.

Thanks and Regards, 
J.Surendra.,

Difficulty with PDF Document

Andrea Sherry
 

A member on this list recommended Docuscanplus as a scanning program some time ago.
Till recently this program worked perfectly.
However approx 6 weeks ago the program just said "Unknown" when I opened it to access a document.
Are there any users of this program on this list?
Has anyone had this experience?
If this is not the correct place to ask these questions, is there a list for this product?
Andrea

Re: Problems w/single key navigation

 

Hi,

Have you tried logging out and back in or restarting your computer?

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Greg Rhodes
Sent: Thursday, January 16, 2020 7:17 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Problems w/single key navigation

 

Thanks for all responses. Problem not resolved. I’m using a Bluetooth keyboard. Tried unchecking the

“(Trap All Non-Command Gestures”. I’ve uninstalled NVDA and reinstalled it. I’m very familiar with Browse mode and know that I need to be in it to do single key navigation. Since yesterday’s MS Edge and Windows updates, I can’t always tell if I’m in browse mode. When I press the NVDA key and the spacebar, NVDA goes silent and I get no audio feedback. Sometimes, Alt/Tabbing will get NVDA audio going again. MS Accessibility Desk was no help at all. Not sure what to do at this point.

Greg

 

Re: Problems w/single key navigation

Greg Rhodes
 

Thanks for all responses. Problem not resolved. I’m using a Bluetooth keyboard. Tried unchecking the

“(Trap All Non-Command Gestures”. I’ve uninstalled NVDA and reinstalled it. I’m very familiar with Browse mode and know that I need to be in it to do single key navigation. Since yesterday’s MS Edge and Windows updates, I can’t always tell if I’m in browse mode. When I press the NVDA key and the spacebar, NVDA goes silent and I get no audio feedback. Sometimes, Alt/Tabbing will get NVDA audio going again. MS Accessibility Desk was no help at all. Not sure what to do at this point.

Greg

 

Re: Problems w/single key navigation

hurrikennyandopo ...
 

Hi Greg


Do you get unknown also if you use mozilla thunder bird? I did at one time have nvda not speak in web pages and mozilla thunder bird and I think around that time nvda saying unknown down on the task bar. It gave the same sort of problems as mentioned below. but I found out that the settings in mozilla had got corrupted etc some how and affected quite a few programs more Mozilla based and some others. I then deleted out the settings under %appdata% then re installed the program or 2 then it fixed it. but if i just uninstalled then setup over it again it did not.

But before or was it after that when the following was typed in below it fixed the same sort of problems having those problems.

But that was for mozilla settings.


Then after that come the com fixing tool but some times does not seem to work yet when typed in it does?

That was for a windows 10 machine at that time.

Troubleshooting - NVDA says “unknown” or “pane” in all of your browsers, Mozilla Thunderbird email client and other places
If for some reason you have problems with NVDA saying “unknown” or “pane” check for the following symptoms:

In all of your browsers, or the Mozilla Thunderbird email client, no matter what you do, you still hear “unknown” or “pane”.

In the browser, email client and other menus you notice you cannot get into your menus, or you are unable to use the quick navigation keys

When you have been told the page is loaded and notice strange behaviour

Mozilla Thunderbird saying unknown while you try to navigate it

Your applications key does not work with it being spoken out and other strange behaviour in Windows

The running applications icons are not being spoken out
It might be a good idea to do the following:
Please note: If you are hearing “unknown” or “pane” (as discussed above) NVDA might seem like it is still working properly but it may not be completely in Windows and other programmes.
You could try the following solution which will allow you to re-register your dll files in case they are causing the problem.
Press the Windows key then type the following into the search box. Type in “command prompt”. Once you have located command prompt, in the search results, press the Applications key to bring up the context menu. Arrow down to select “run as administrator” and press the Enter key. This will take you to a command prompt window. This will not be spoken out. You may need sighted assistance for this.
Type in the following command
for %x in (c:\windows\system32\*.dll) do regsvr32 /s %x
This should re-register all components in the system32 folder.
When it is finished, you can close the command prompt window with the Alt + F4 key. You should notice now where NVDA was saying “unknown” as in some examples given, NVDA should now read the icons in the running applications area of Windows, speak the content of the webpage and menus, and also in Mozilla Thunderbird and other places in Windows including the Windows applications context menu.
Run COM Registration Fixing tool
If you are getting any of the following problems below - with Windows unregistering some of the files needed by NVDA - the following tool section in NVDA will get you out of trouble. To access this tool press the NVDA key + letter N while NVDA is running. Arrow down to the tools menu. A submenu will come up. Arrow down to the menu called Run COM Registration Fixing tool... then press the Enter key.  It should register the files needed by NVDA.


Let us know what happens. I tlooks as though the tool did not work so you could try typing it in through the command prompt make sure all directions are followed correctly I know that has done the trick on the machine if the tool did not work for some reason.


The settings for mozilla seemed like a similarbug.


Gene nz



On 17/01/2020 8:39 am, Greg Rhodes wrote:

Running the NVDA com registration tool didn’t solve the problem. Still don’t have single key navigation in any of my web browsers. Other suggestions? Thanks.

 

Greg

 

Re: Alternatives to Excel

David Goldfield
 

I agree with your comments regarding LibreOffice. OpenOffice Calc may be
a good alternative and if people find that it's doing what they need
they should certainly continue to use it. However, LibreOffice receives
many more updates with bug fixes and feature additions. If there's ever
a chance for accessibility in Calc and Writer to be improved we're
likely to see that happening in LibreOffice before OpenOffice.

David Goldfield,
Blindness Assistive Technology Specialist
JAWS Certified, 2019

WWW.DavidGoldfield.org

On 1/15/2020 6:53 AM, René Linke wrote:
Hi,

LibreOffice is now very accessible because it is getting many updates
in short time (improvements, security fixes, etc.).

René



Windows 10 App Essentials 19.11.5 emergency patch for Edge 79 users #addonrelease

 

Hi all,

 

Due to community feedback, I’m releasing Windows 10 App Essentials 19.11.5 emergency patch for Edge 79 users. This patch is applicable to NVDA 2019.2.x only (NVDA 2019.3 beta 2 and later includes support for Edge 79 stable). As this is an emergency patch, coupled with the fact that latest stable release is 20.01 which supports NVDA 2019.3 or later, this version will not show up via Add-on Updater.

 

Direct download link:

https://github.com/josephsl/wintenApps/releases/download/19.11/wintenApps-19.11.5.nvda-addon

 

This patch works the same way as what’s included in NVDA 2019.3 beta 2 – after installing this patch in 2019.2.1, you won’t have to turn off native UI Automation anymore.

 

Also, an important note: after installing this patch, you may get a notification that a new add-on update for Windows 10 App Essentials is available. Please ignore this notification until NVDA 2019.3 or later is installed.

 

Cheers,

Joseph

Re: edge showstopper maybe

Sarah k Alawami
 

Yes I use chrome on mac os, didn't much care for it on iOs but I have it. And I use chrome on windows, not as my default, but it works. Use it for my twitch stuff as it is just easy to deal with and all of my pages and bookmarks sync over.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 16 Jan 2020, at 16:45, Arlene wrote:

Sarah, have you tried Chrome on your Mac ios? If you did, You probably would like Microsoft edge.

 

Sent from Mail for Windows 10

 

From: Sarah k Alawami
Sent: January 15, 2020 9:39 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] edge showstopper maybe

 

Exactgly. I move to have shawn band form this list as well. And yes I am calling him out publicly. This is why I hardly post on this list because of the thoughtless dribble he posts, it is just utter crap and utter nonsense.

Take care and blessings. And enjoy the new edge. Can't wait to get my hands on it on mac os. It rocks there.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 15 Jan 2020, at 14:23, Kevin Cussick via Groups.Io wrote:

Yes, good post and really this is just more of the same dribble that we have had over on the windows10 list.

On 15/01/2020 21:02, Brian Vogel wrote:

On Wed, Jan 15, 2020 at 02:44 PM, Shaun Everiss wrote:

still by mentioning the words alpha or beta it implies something that is
makeshift, not secure, not stable, could trash windows, could do who knows
what.

Neither of which is accurate in the world of software development.

Alpha is simply in the earliest stages of development, and may be unstable, but seldom if ever is any of the other things.

Beta is considered to be quite stable, and things released as beta by commercial and many open source entities are considered to be possible release candidates, but will not actually be designated as such until a beta has been used "in the wild" long enough to show that there are not unsuspected issues, most of which would be minor, but possibly annoying.

Alpha software carries a high risk for possible annoyance and failure of that software itself, and very seldom takes anything else along with it.

Beta software can generally be thought of as being stable, with some possible refinements at the periphery that may be needed.   It's not uncommon for something to go from beta to release sans any changes, either.

--

Brian *-* Windows 10 Pro, 64-Bit, Version 1909, Build 18363

Most of the change we think we see in life is due to truths being in and out of favor.

~ Robert Frost, The Black Cottage (1914)


 

Re: Accessible text expantion tools.

Sarah k Alawami
 

I use text expander. That covers pretty much the whole thing.

Take care.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 16 Jan 2020, at 3:39, Robert Kingett wrote:

There is no fully accessible text expansion tool that will cover the whole OS. I've been looking for years, and it seems like none exists. The closest thing you will get is buying NCH's FastFox expansion software. But even that is not fully accessible.

Of course, you could always use autocorrect in Microsoft Word, cut, and copy the text, but I'd like one that works universally, myself and is fully accessible. Sadly, no fully accessible option exists.

Re: edge showstopper maybe

Arlene
 

Sarah, have you tried Chrome on your Mac ios? If you did, You probably would like Microsoft edge.

 

Sent from Mail for Windows 10

 

From: Sarah k Alawami
Sent: January 15, 2020 9:39 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] edge showstopper maybe

 

Exactgly. I move to have shawn band form this list as well. And yes I am calling him out publicly. This is why I hardly post on this list because of the thoughtless dribble he posts, it is just utter crap and utter nonsense.

Take care and blessings. And enjoy the new edge. Can't wait to get my hands on it on mac os. It rocks there.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 15 Jan 2020, at 14:23, Kevin Cussick via Groups.Io wrote:

Yes, good post and really this is just more of the same dribble that we have had over on the windows10 list.

On 15/01/2020 21:02, Brian Vogel wrote:

On Wed, Jan 15, 2020 at 02:44 PM, Shaun Everiss wrote:

still by mentioning the words alpha or beta it implies something that is
makeshift, not secure, not stable, could trash windows, could do who knows
what.

Neither of which is accurate in the world of software development.

Alpha is simply in the earliest stages of development, and may be unstable, but seldom if ever is any of the other things.

Beta is considered to be quite stable, and things released as beta by commercial and many open source entities are considered to be possible release candidates, but will not actually be designated as such until a beta has been used "in the wild" long enough to show that there are not unsuspected issues, most of which would be minor, but possibly annoying.

Alpha software carries a high risk for possible annoyance and failure of that software itself, and very seldom takes anything else along with it.

Beta software can generally be thought of as being stable, with some possible refinements at the periphery that may be needed.   It's not uncommon for something to go from beta to release sans any changes, either.

--

Brian *-* Windows 10 Pro, 64-Bit, Version 1909, Build 18363

Most of the change we think we see in life is due to truths being in and out of favor.

~ Robert Frost, The Black Cottage (1914)


 

Re: website

Kerryn Gunness
 

thanks

----- Original Message -----
From: "Rayn Darren" <rayndarren@...>
To: <nvda@nvda.groups.io>
Sent: Thursday, January 16, 2020 4:33 AM
Subject: Re: [nvda] website


Apologies for missing the OP here... Kerryn, if you need help building, gimme a shout :)

Sarah
On 1/15/2020 10:21 PM, Quentin Christensen wrote:
Hi Kerryn,

We would request you please link to NV Access to download, because if you
link to https://www.nvaccess.org/download/ the user will always get the
current version.

Kind regards

Quentin.

On Thu, Jan 16, 2020 at 7:31 AM Kerryn Gunness via Groups.Io <k_gunness=
yahoo.ca@groups.io> wrote:

guys
i want to build a website, i want to use nvda download links for
link for downloading nvda
and the link for the official nvda add on site

can i do this?



Re: website

Kerryn Gunness
 


thanks
 

----- Original Message -----
Sent: Thursday, January 16, 2020 2:21 AM
Subject: Re: [nvda] website

Hi Kerryn,

We would request you please link to NV Access to download, because if you link to https://www.nvaccess.org/download/ the user will always get the current version.

Kind regards

Quentin.

On Thu, Jan 16, 2020 at 7:31 AM Kerryn Gunness via Groups.Io <k_gunness=yahoo.ca@groups.io> wrote:
guys
i want to build a website, i want to use nvda download links for
link for downloading nvda
and the link for the official nvda add on site
 
can i do this?
 



--
Quentin Christensen
Training and Support Manager

Re: Problems w/single key navigation

Quentin Christensen
 

Are you definitely in Browse mode?  If you press NVDA+spacebar does NVDA change between Browse mode and focus mode and back?  If you can manually change to Browse mode, do the single letter navigation keys work then?  If so, look in NVDA's browse mode settings (NVDA+control+b).  There are several which affect when NVDA changes modes, particularly "Enable browse mode on page load", "Automatic focus mode for focus changes" and "Automatic focus mode for caret movement".  Those can all be enabled or disabled.

Regards

Quentin.

On Fri, Jan 17, 2020 at 9:20 AM Gene <gsasner@...> wrote:
Are you using an internal keyboard?  Though I'm very doubtful it would matter, I don't want to leave the question unasked.
 
Also, NVDA has a setting in browse mode settings that is a check box and says,
Trap all non-command gestures from reaching the document.
That setting shouldn't cause any problems but if the check box is checked, try unchecking it. 
Gene
----- Original Message ------
Sent: Thursday, January 16, 2020 1:39 PM
Subject: Re: [nvda] Problems w/single key navigation

Running the NVDA com registration tool didn’t solve the problem. Still don’t have single key navigation in any of my web browsers. Other suggestions? Thanks.

 

Greg

 



--
Quentin Christensen
Training and Support Manager

Re: Problems w/single key navigation

Gene
 

Are you using an internal keyboard?  Though I'm very doubtful it would matter, I don't want to leave the question unasked.
 
Also, NVDA has a setting in browse mode settings that is a check box and says,
Trap all non-command gestures from reaching the document.
That setting shouldn't cause any problems but if the check box is checked, try unchecking it. 

Gene
----- Original Message ------
Sent: Thursday, January 16, 2020 1:39 PM
Subject: Re: [nvda] Problems w/single key navigation

Running the NVDA com registration tool didn’t solve the problem. Still don’t have single key navigation in any of my web browsers. Other suggestions? Thanks.

 

Greg

 

Re: edge showstopper maybe

molly the blind tech lover
 

Well I just downloaded the new edge . . . I’m going to check it out.

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Davy Cuppens
Sent: Thursday, January 16, 2020 10:35 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] edge showstopper maybe

 

If you want stable software, never mess with betas whatever software it is.

 

From: Gene

Sent: Wednesday, January 15, 2020 8:04 PM

Subject: Re: [nvda] edge showstopper maybe

 

What do you mean by not stable?  Not all add-ons working with it isn't a matter of stability.  it is a matter of compatibility and probably has to do with those add-ons not yet being compatible.  but it is likely stable in that it works properly in general and doesn't crash more than a stable program does.

 

I haven't tried it but in the past, I have found NVDA betas to generally be stable.

 

Gene

----- Original message -----

Sent: Wednesday, January 15, 2020 12:30 PM

Subject: Re: [nvda] edge showstopper maybe

 

Hmph.

And there we have a problem joseph.

2019.3 is not stable yet.

Not all addons I use work with it just yet.

If it comes I will have to set it up with narator.

I may try later on today to do this again because I have all the cloud
boxes here.

Is there a standalone installer for edge like there is with chrome?



On 16/01/2020 6:57 am, Joseph Lee wrote:
> Hi,
> You need to use NVDA 2019.3 beta 2 or later.
> Cheers,
> Joseph
>
> -----Original Message-----
> From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Shaun Everiss
> Sent: Wednesday, January 15, 2020 9:53 AM
> To: nvda@nvda.groups.io
> Subject: [nvda] edge showstopper maybe
>
> Hi.
>
> There are a few big issues.
>
> I was moving round setting things up and nvda froze up completely and I had to restart it
>
> INFO - _UIAHandler.UIAHandler.MTAThreadFunc (03:58:43.407):
> UIAutomation: IUIAutomation6
> INFO - core.main (03:58:44.369):
> NVDA initialized
> ERROR - NVDAObjects.behaviors.LiveText._monitor (03:58:45.331):
> Error getting initial lines
> Traceback (most recent call last):
>     File "NVDAObjects\behaviors.pyo", line 270, in _monitor
>     File "NVDAObjects\window\winConsole.pyo", line 54, in _getTextLines
>     File "winConsoleHandler.pyo", line 126, in getConsoleVisibleLines
>     File "wincon.pyo", line 75, in GetConsoleScreenBufferInfo
> WindowsError: [Error 6] The handle is invalid.
> ERROR - eventHandler.executeEvent (06:35:56.948):
> error executing event: gainFocus on
> <NVDAObjects.Dynamic_EditableTextWithoutAutoSelectDetectionUIA object at
> 0x05A68690> with extra args of {}
> Traceback (most recent call last):
>     File "eventHandler.pyo", line 155, in executeEvent
>     File "eventHandler.pyo", line 92, in __init__
>     File "eventHandler.pyo", line 100, in next
>     File
> "C:\Users\shaun\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easyTableNavigator.py",
> line 82, in event_gainFocus
>     File "eventHandler.pyo", line 100, in next
>     File "NVDAObjects\__init__.pyo", line 1030, in event_gainFocus
>     File "NVDAObjects\__init__.pyo", line 918, in reportFocus
>     File "speech.pyo", line 432, in speakObject
>     File "speech.pyo", line 820, in speakTextInfo
>     File "NVDAObjects\UIA\__init__.pyo", line 646, in getTextWithFields
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 598, in _getTextWithFieldsForUIARange
> COMError: (-2146233079, None, (None, None, None, 0, None)) ERROR - eventHandler.executeEvent (06:36:24.200):
> error executing event: gainFocus on
> <NVDAObjects.Dynamic_EditableTextWithoutAutoSelectDetectionUIA object at
> 0x05BEFD50> with extra args of {}
> Traceback (most recent call last):
>     File "eventHandler.pyo", line 155, in executeEvent
>     File "eventHandler.pyo", line 92, in __init__
>     File "eventHandler.pyo", line 100, in next
>     File
> "C:\Users\shaun\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easyTableNavigator.py",
> line 82, in event_gainFocus
>     File "eventHandler.pyo", line 100, in next
>     File "NVDAObjects\__init__.pyo", line 1030, in event_gainFocus
>     File "NVDAObjects\__init__.pyo", line 918, in reportFocus
>     File "speech.pyo", line 432, in speakObject
>     File "speech.pyo", line 820, in speakTextInfo
>     File "NVDAObjects\UIA\__init__.pyo", line 646, in getTextWithFields
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 598, in _getTextWithFieldsForUIARange
> COMError: (-2146233079, None, (None, None, None, 0, None)) ERROR - eventHandler.executeEvent (06:37:14.160):
> error executing event: gainFocus on
> <NVDAObjects.Dynamic_EditableTextWithoutAutoSelectDetectionUIA object at
> 0x0573D2D0> with extra args of {}
> Traceback (most recent call last):
>     File "eventHandler.pyo", line 155, in executeEvent
>     File "eventHandler.pyo", line 92, in __init__
>     File "eventHandler.pyo", line 100, in next
>     File
> "C:\Users\shaun\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easyTableNavigator.py",
> line 82, in event_gainFocus
>     File "eventHandler.pyo", line 100, in next
>     File "NVDAObjects\__init__.pyo", line 1030, in event_gainFocus
>     File "NVDAObjects\__init__.pyo", line 918, in reportFocus
>     File "speech.pyo", line 432, in speakObject
>     File "speech.pyo", line 820, in speakTextInfo
>     File "NVDAObjects\UIA\__init__.pyo", line 646, in getTextWithFields
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 598, in _getTextWithFieldsForUIARange
> COMError: (-2146233079, None, (None, None, None, 0, None)) WARNING - watchdog._watcher (06:39:04.387):
> Core frozen in stack:
>     File "nvda.pyw", line 231, in <module>
>     File "core.pyo", line 519, in main
>     File "wx\core.pyo", line 2134, in MainLoop
>     File "gui\__init__.pyo", line 1003, in Notify
>     File "core.pyo", line 490, in run
>     File "queueHandler.pyo", line 86, in pumpAll
>     File "queueHandler.pyo", line 53, in flushQueue
>     File "eventHandler.pyo", line 62, in _queueEventCallback
>     File "eventHandler.pyo", line 155, in executeEvent
>     File "eventHandler.pyo", line 92, in __init__
>     File "eventHandler.pyo", line 100, in next
>     File
> "C:\Users\shaun\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easyTableNavigator.py",
> line 82, in event_gainFocus
>     File "eventHandler.pyo", line 100, in next
>     File "NVDAObjects\__init__.pyo", line 1030, in event_gainFocus
>     File "NVDAObjects\__init__.pyo", line 918, in reportFocus
>     File "speech.pyo", line 432, in speakObject
>     File "speech.pyo", line 820, in speakTextInfo
>     File "NVDAObjects\UIA\__init__.pyo", line 646, in getTextWithFields
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 628, in _getTextWithFieldsForUIARange
>
> WARNING - watchdog._watcher (06:39:19.440):
> Core frozen in stack:
>     File "nvda.pyw", line 231, in <module>
>     File "core.pyo", line 519, in main
>     File "wx\core.pyo", line 2134, in MainLoop
>     File "gui\__init__.pyo", line 1003, in Notify
>     File "core.pyo", line 490, in run
>     File "queueHandler.pyo", line 86, in pumpAll
>     File "queueHandler.pyo", line 53, in flushQueue
>     File "eventHandler.pyo", line 62, in _queueEventCallback
>     File "eventHandler.pyo", line 155, in executeEvent
>     File "eventHandler.pyo", line 92, in __init__
>     File "eventHandler.pyo", line 100, in next
>     File
> "C:\Users\shaun\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easyTableNavigator.py",
> line 82, in event_gainFocus
>     File "eventHandler.pyo", line 100, in next
>     File "NVDAObjects\__init__.pyo", line 1030, in event_gainFocus
>     File "NVDAObjects\__init__.pyo", line 918, in reportFocus
>     File "speech.pyo", line 432, in speakObject
>     File "speech.pyo", line 820, in speakTextInfo
>     File "NVDAObjects\UIA\__init__.pyo", line 646, in getTextWithFields
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 628, in _getTextWithFieldsForUIARange
>
> WARNING - watchdog._watcher (06:39:34.496):
> Core frozen in stack:
>     File "nvda.pyw", line 231, in <module>
>     File "core.pyo", line 519, in main
>     File "wx\core.pyo", line 2134, in MainLoop
>     File "gui\__init__.pyo", line 1003, in Notify
>     File "core.pyo", line 490, in run
>     File "queueHandler.pyo", line 86, in pumpAll
>     File "queueHandler.pyo", line 53, in flushQueue
>     File "eventHandler.pyo", line 62, in _queueEventCallback
>     File "eventHandler.pyo", line 155, in executeEvent
>     File "eventHandler.pyo", line 92, in __init__
>     File "eventHandler.pyo", line 100, in next
>     File
> "C:\Users\shaun\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easyTableNavigator.py",
> line 82, in event_gainFocus
>     File "eventHandler.pyo", line 100, in next
>     File "NVDAObjects\__init__.pyo", line 1030, in event_gainFocus
>     File "NVDAObjects\__init__.pyo", line 918, in reportFocus
>     File "speech.pyo", line 432, in speakObject
>     File "speech.pyo", line 820, in speakTextInfo
>     File "NVDAObjects\UIA\__init__.pyo", line 646, in getTextWithFields
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 590, in _getTextWithFieldsForUIARange
>
> WARNING - watchdog._watcher (06:39:49.542):
> Core frozen in stack:
>     File "nvda.pyw", line 231, in <module>
>     File "core.pyo", line 519, in main
>     File "wx\core.pyo", line 2134, in MainLoop
>     File "gui\__init__.pyo", line 1003, in Notify
>     File "core.pyo", line 490, in run
>     File "queueHandler.pyo", line 86, in pumpAll
>     File "queueHandler.pyo", line 53, in flushQueue
>     File "eventHandler.pyo", line 62, in _queueEventCallback
>     File "eventHandler.pyo", line 155, in executeEvent
>     File "eventHandler.pyo", line 92, in __init__
>     File "eventHandler.pyo", line 100, in next
>     File
> "C:\Users\shaun\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easyTableNavigator.py",
> line 82, in event_gainFocus
>     File "eventHandler.pyo", line 100, in next
>     File "NVDAObjects\__init__.pyo", line 1030, in event_gainFocus
>     File "NVDAObjects\__init__.pyo", line 918, in reportFocus
>     File "speech.pyo", line 432, in speakObject
>     File "speech.pyo", line 820, in speakTextInfo
>     File "NVDAObjects\UIA\__init__.pyo", line 646, in getTextWithFields
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 628, in _getTextWithFieldsForUIARange
>
> WARNING - watchdog._watcher (06:40:04.601):
> Core frozen in stack:
>     File "nvda.pyw", line 231, in <module>
>     File "core.pyo", line 519, in main
>     File "wx\core.pyo", line 2134, in MainLoop
>     File "gui\__init__.pyo", line 1003, in Notify
>     File "core.pyo", line 490, in run
>     File "queueHandler.pyo", line 86, in pumpAll
>     File "queueHandler.pyo", line 53, in flushQueue
>     File "eventHandler.pyo", line 62, in _queueEventCallback
>     File "eventHandler.pyo", line 155, in executeEvent
>     File "eventHandler.pyo", line 92, in __init__
>     File "eventHandler.pyo", line 100, in next
>     File
> "C:\Users\shaun\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easyTableNavigator.py",
> line 82, in event_gainFocus
>     File "eventHandler.pyo", line 100, in next
>     File "NVDAObjects\__init__.pyo", line 1030, in event_gainFocus
>     File "NVDAObjects\__init__.pyo", line 918, in reportFocus
>     File "speech.pyo", line 432, in speakObject
>     File "speech.pyo", line 820, in speakTextInfo
>     File "NVDAObjects\UIA\__init__.pyo", line 646, in getTextWithFields
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 622, in _getTextWithFieldsForUIARange
>     File "NVDAObjects\UIA\__init__.pyo", line 628, in _getTextWithFieldsForUIARange I got this when I restarted the brouser.
>
> WARNING - watchdog._watcher (06:49:02.773):
> Core frozen in stack:
>     File "nvda.pyw", line 231, in <module>
>     File "core.pyo", line 519, in main
>     File "wx\core.pyo", line 2134, in MainLoop
>     File "gui\__init__.pyo", line 1003, in Notify
>     File "core.pyo", line 490, in run
>     File "queueHandler.pyo", line 86, in pumpAll
>     File "queueHandler.pyo", line 53, in flushQueue
>     File "eventHandler.pyo", line 62, in _queueEventCallback
>     File "eventHandler.pyo", line 155, in executeEvent
>     File "eventHandler.pyo", line 92, in __init__
>     File "eventHandler.pyo", line 100, in next
>     File
> "C:\Users\shaun\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easyTableNavigator.py",
> line 82, in event_gainFocus
>     File "eventHandler.pyo", line 100, in next
>     File "NVDAObjects\__init__.pyo", line 1030, in event_gainFocus
>     File "NVDAObjects\__init__.pyo", line 918, in reportFocus
>     File "speech.pyo", line 416, in speakObject
>     File "speech.pyo", line 289, in speakObjectProperties
>     File "baseObject.pyo", line 47, in __get__
>     File "baseObject.pyo", line 147, in _getPropertyViaCache
>     File "NVDAObjects\UIA\__init__.pyo", line 1090, in _get_keyboardShortcut
>     File "NVDAObjects\UIA\__init__.pyo", line 744, in _getUIACacheablePropertyValue
>
> WARNING - watchdog._watcher (06:49:17.822):
> Core frozen in stack:
>     File "nvda.pyw", line 231, in <module>
>     File "core.pyo", line 519, in main
>     File "wx\core.pyo", line 2134, in MainLoop
>     File "gui\__init__.pyo", line 1003, in Notify
>     File "core.pyo", line 490, in run
>     File "queueHandler.pyo", line 86, in pumpAll
>     File "queueHandler.pyo", line 53, in flushQueue
>     File "eventHandler.pyo", line 62, in _queueEventCallback
>     File "eventHandler.pyo", line 155, in executeEvent
>     File "eventHandler.pyo", line 92, in __init__
>     File "eventHandler.pyo", line 100, in next
>     File
> "C:\Users\shaun\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easyTableNavigator.py",
> line 82, in event_gainFocus
>     File "eventHandler.pyo", line 100, in next
>     File "NVDAObjects\__init__.pyo", line 1030, in event_gainFocus
>     File "NVDAObjects\__init__.pyo", line 918, in reportFocus
>     File "speech.pyo", line 416, in speakObject
>     File "speech.pyo", line 289, in speakObjectProperties
>     File "baseObject.pyo", line 47, in __get__
>     File "baseObject.pyo", line 147, in _getPropertyViaCache
>     File "NVDAObjects\UIA\__init__.pyo", line 1090, in _get_keyboardShortcut
>     File "NVDAObjects\UIA\__init__.pyo", line 744, in _getUIACacheablePropertyValue
>
> WARNING - watchdog._watcher (06:49:32.858):
> Core frozen in stack:
>     File "nvda.pyw", line 231, in <module>
>     File "core.pyo", line 519, in main
>     File "wx\core.pyo", line 2134, in MainLoop
>     File "gui\__init__.pyo", line 1003, in Notify
>     File "core.pyo", line 490, in run
>     File "queueHandler.pyo", line 86, in pumpAll
>     File "queueHandler.pyo", line 53, in flushQueue
>     File "eventHandler.pyo", line 62, in _queueEventCallback
>     File "eventHandler.pyo", line 155, in executeEvent
>     File "eventHandler.pyo", line 92, in __init__
>     File "eventHandler.pyo", line 100, in next
>     File
> "C:\Users\shaun\AppData\Roaming\nvda\addons\easyTableNavigator\globalPlugins\easyTableNavigator.py",
> line 82, in event_gainFocus
>     File "eventHandler.pyo", line 100, in next
>     File "NVDAObjects\__init__.pyo", line 1030, in event_gainFocus
>     File "NVDAObjects\__init__.pyo", line 918, in reportFocus
>     File "speech.pyo", line 416, in speakObject
>     File "speech.pyo", line 289, in speakObjectProperties
>     File "baseObject.pyo", line 47, in __get__
>     File "baseObject.pyo", line 147, in _getPropertyViaCache
>     File "NVDAObjects\UIA\__init__.pyo", line 1090, in _get_keyboardShortcut
>     File "NVDAObjects\UIA\__init__.pyo", line 744, in _getUIACacheablePropertyValue Based on this, and even though I can get this right now I am going to uninstall it and wait.
>
> It looks like you can uninstall anyway.
>
>
>
>
>
>
>
>
>
>

Re: NVDA 2019.3 beta 2 now available

Quentin Christensen
 

Mr Oguledo,

Please find all the information and download link for the new beta here: https://www.nvaccess.org/post/nvda-2019-3beta2-now-available-for-testing/

For add-ons, you should find the main ones here: https://addons.nvda-project.org/  Note that some will have two versions as the newer Python 3 compatible version may not be backward compatible with NVDA 2019.2.1 and earlier.

Regards

Quentin.

On Thu, Jan 16, 2020 at 11:36 PM Chikodinaka mr. Oguledo <chikodinaka.2girls@...> wrote:
I need the link 2the new NVDA release. I have addOns to downlode & update

On 1/16/20, Rui Fontes <rui.fontes@...> wrote:
> Please, go to:
> %appdata%\vocalizer-for-nvda
> and delete the activation.dat file.
> Restart NVDA and reactivate the license.
>
> Any problem, contact for:
> rui.fontes@...
>
> Rui Fontes
> Tiflotecnia, Lda.
>
> Greg Wocher <gwocher@...> escreveu no dia quinta, 16/01/2020 à(s)
> 11:48:
>
>> Hello,
>> I am still having issues with the vocalizer expressive driver. I am using
>> this version and every time I restart NVDA it tells me that my vocalizer
>> expressive license cannot be verified. I am running NVDA 2019.3 beta 2.
>>
>> Greg Wocher
>>
>>
>> On Jan 15, 2020, at 7:45 PM, Rui Fontes <rui.fontes@...>
>> wrote:
>>
>> Hello!
>> Sorry by the delay, but my PC died...
>>
>> The direct link is:
>>
>> https://www.tiflotecnia.net/Instal/vocalizer_expressive_driver-3.1.0.nvda-addon
>>
>> Best regards,
>>
>> Rui Fontes
>> Tiflotecnia, Lda.
>>
>> Andrea Sherry <sherryan@...> escreveu no dia quarta,
>> 15/01/2020 à(s) 02:51:
>>
>>> Well where can I find the expressive driver to run with the latest beta?
>>> Andreqa
>>>
>>> On 15/01/2020 10:40 am, Quentin Christensen wrote:
>>> > Hi everyone,
>>> >
>>> > NVDA 2019.3 beta 2 is now available for testing.
>>> >
>>> > This update adds a few new features and fixes from beta 1 including:
>>> >
>>> > - The new Windows console support using UI Automation is no longer
>>> > used by default as it is not yet ready for production use. However, it
>>> > is still available from NVDA’s advance settings panel. (#10684)
>>> > - NVDA no longer freezes in the new version of Microsoft Edge that is
>>> > based on Chromium. (#10675)
>>> > - A short sound is now optionally played when screen curtain is turned
>>> > on or off. (#10611)
>>> > - Fixed an issue when upgrading configuration from recent alpha
>>> > builds. (#10598)
>>> > - Fixed an issue when navigating lists with table navigation commands.
>>> > (#10623)
>>> >
>>> > For all the details and to download the new beta, please visit:
>>> >
>>> https://www.nvaccess.org/post/nvda-2019-3beta2-now-available-for-testing/
>>> >
>>> > As always, please do report any issues or bugs you encounter.
>>> >
>>> > Kind regards
>>> >
>>> > Quentin.
>>> >
>>> > --
>>> >
>>> > Quentin Christensen
>>> > Training and Support Manager
>>> >
>>> > Web: www.nvaccess.org <http://www.nvaccess.org/>
>>> > Training: https://www.nvaccess.org/shop/
>>> > Certification: https://certification.nvaccess.org/
>>> > User group: https://nvda.groups.io/g/nvda
>>> > Facebook: http://www.facebook.com/NVAccess
>>> > Twitter: @NVAccess <https://twitter.com/NVAccess>
>>> >
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>
>
>
>





--
Quentin Christensen
Training and Support Manager

Re: Unread/Read Status of Messages Broken In Thunderbird With 2019.3 Beta 2

John Isige
 

Huh! I didn't even know that existed. FYI, there are two radio buttons,
"immediately on display" and "after (X) seconds". Mine was set to
"immediately on display", so I can see how there would be a problem if
the other option is set, because the default time seems to be five
seconds. So that's definitely something to check, as it would be easy
enough for it to hit that if you've got a lot of mail coming in.

On 1/16/2020 13:11, hurrikennyandopo ... wrote:
Hi


What have you got your message time out set to? Mine is set to 5
seconds otherwise I think they show as read.


In mozilla thunder bird go to tools then options then display then
advanced then under there is a setting to change your time out of your
messages. You might have to tab or arrow around to find it to change it.


Mine here reads the unread message as it status until I open it. I
think there was a setting in thunder bird so it could also save
replied etc but would have to look as have not used it for a long time.


Gene nz


On 17/01/2020 3:42 am, Ron Canazzi wrote:
Hi Clive,

For me, NVDA used to show numbers of unread messages in the tree view
of folders when you arrowed over them.  With release of 2019.3 beta
2, this no longer works for me.  Many others are not having this
problem, so there must be something going on with my system.


On 1/16/2020 6:44 AM, Clive Lever wrote:
Sorry if this has been covered before, but I notice that when I'm
reading the list of folders in my inbox (Outlook, Office 365), in
Jaws, it tells me how many unread messages there are in the folder.
NVDA doesn't do this, to my knowledge. If it can say the total
number of unread messages the way Jaws does, please can someone tell
me how to make it do so? It's particularly useful when, say, I come
back from holiday to hundreds of messages, as it tells me when the
backlog is cleared.

Thanks,
Clive



-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Ralf Kefferpuetz
Sent: Thursday, January 16, 2020 7:41 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Unread/Read Status of Messages Broken In
Thunderbird With 2019.3 Beta 2

I'm on 68.3.1 with NVDA 2019.3 beta 2 and all message flags are read
as usual.

Cheers,
   Ralf

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Ron
Canazzi
Sent: Donnerstag, 16. Januar 2020 01:13
To: nvda@nvda.groups.io
Subject: Re: [nvda] Unread/Read Status of Messages Broken In
Thunderbird With 2019.3 Beta 2

The last version of Thunderbird that reads the status line and the
read/unread status   of messages properly is 60.9 or 60 something.


On 1/15/2020 1:06 PM, John Isige wrote:
I just downloaded NVDA 2019.3beta2 and told it to continue running.
I'm
running Thunderbird 60.9.1, 32-bit if it matters. Message statuses
work
fine for me with up and down arrows, I didn't even have to close and
restart Thunderbird. What do you mean by saying "last fully compatible
version"? What's broken? I admit I use Thunderbird pretty
minimally, but
everything seems fine to me.


On 1/15/2020 9:56, Ron Canazzi wrote:
Hi Group,

For some reason, when I installed 2019.3 beta 2, when I read the
status line and/or navigate with up/down arrow keys, the read/unread
status of message is inconsistent or incorrect.

I wonder if anyone else is experiencing this issue.  I am using
Thunderbird 60.4--the last fully compatible version of Thunderbird.

Re: Problems w/single key navigation

Chris
 

Make sure you are in browse mode

 

 

From: Greg Rhodes
Sent: 16 January 2020 19:39
To: nvda@nvda.groups.io
Subject: Re: [nvda] Problems w/single key navigation

 

Running the NVDA com registration tool didn’t solve the problem. Still don’t have single key navigation in any of my web browsers. Other suggestions? Thanks.

 

Greg

 

 

Re: Problems w/single key navigation

Tyler Spivey
 

Does NVDA say unknown in browsers instead of reading you links and such when you press tab?

On 1/16/2020 11:39 AM, Greg Rhodes wrote:

Running the NVDA com registration tool didn’t solve the problem. Still don’t have single key navigation in any of my web browsers. Other suggestions? Thanks.

 

Greg

 

Re: Problems w/single key navigation

Greg Rhodes
 

Running the NVDA com registration tool didn’t solve the problem. Still don’t have single key navigation in any of my web browsers. Other suggestions? Thanks.

 

Greg