Good Day:  Does it work with Narrator?

Dave

On 1/8/2020 6:50 AM, Gerardo Corripio wrote:

> I updated my Bard Express to version2, thus I was hoping that in this new version, the issue in where the NVDA screen reader would read the entirety of the book information when on lists of books, would get resolved, but sadly it’s the same; it only reads the first few lines of the annotation. Browsing through the BARD Express View menu, I saw an item something about Screen Readers, whose shortcut is alt+q, but no go either! Whose fault is it that NVDA doesn’t get along as other screen readers with Bard Express? not everyone of us have the means to get Jaws; also as the years have gone by, the NVDA screen reader has been maturing to the point, where me personally, I enjoy using it, thus I feel that no matter which screen reader being used, we should be able to work with the same efficiency with the BARD Express app.

> Any ideas or suggestions if there’s a setting maybe I haven’t thought abut changing to have the info read as it should, without having to go into the Book Details page for this?

> 

> Gera

> Enviado desde mi iPhone SE de Telcel

>

> 

Hi Group,

Here is what is happening with my read/unread status.  In the past, I
used to be able to arrow up and down and highlight the unread messages
and the status would remain unread indefinitely until I actually
opened the message and only after I had done this and closed the
message would it show as read.  Now if I just arrow up and down over
unread messages without opening them, after a short time, they will
show as read--even though I have not yet opened them.  This began
after I installed NVDA 2019.3 beta 2.  Is there some setting in NVDA
that is causing this or perhaps some setting in Thunderbird got changed.

Any help wold be greatly appreciated.


On 1/16/2020 3:29 PM, John Isige wrote:

Huh! I didn't even know that existed. FYI, there are two radio buttons,
"immediately on display" and "after (X) seconds". Mine was set to
"immediately on display", so I can see how there would be a problem if
the other option is set, because the default time seems to be five
seconds. So that's definitely something to check, as it would be easy
enough for it to hit that if you've got a lot of mail coming in.


On 1/16/2020 13:11, hurrikennyandopo ... wrote:

Hi


What have you got your message time out set to? Mine is set to 5
seconds otherwise I think they show as read.


In mozilla thunder bird go to tools then options then display then
advanced then under there is a setting to change your time out of your
messages. You might have to tab or arrow around to find it to change
it.


Mine here reads the unread message as it status until I open it. I
think there was a setting in thunder bird so it could also save
replied etc but would have to look as have not used it for a long time.


Gene nz


On 17/01/2020 3:42 am, Ron Canazzi wrote:

Hi Clive,

For me, NVDA used to show numbers of unread messages in the tree view
of folders when you arrowed over them.  With release of 2019.3 beta
2, this no longer works for me.  Many others are not having this
problem, so there must be something going on with my system.


On 1/16/2020 6:44 AM, Clive Lever wrote:

Sorry if this has been covered before, but I notice that when I'm
reading the list of folders in my inbox (Outlook, Office 365), in
Jaws, it tells me how many unread messages there are in the folder.
NVDA doesn't do this, to my knowledge. If it can say the total
number of unread messages the way Jaws does, please can someone tell
me how to make it do so? It's particularly useful when, say, I come
back from holiday to hundreds of messages, as it tells me when the
backlog is cleared.

Thanks,
Clive



-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Ralf Kefferpuetz
Sent: Thursday, January 16, 2020 7:41 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Unread/Read Status of Messages Broken In
Thunderbird With 2019.3 Beta 2

I'm on 68.3.1 with NVDA 2019.3 beta 2 and all message flags are read
as usual.

Cheers,
   Ralf

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Ron
Canazzi
Sent: Donnerstag, 16. Januar 2020 01:13
To: nvda@nvda.groups.io
Subject: Re: [nvda] Unread/Read Status of Messages Broken In
Thunderbird With 2019.3 Beta 2

The last version of Thunderbird that reads the status line and the
read/unread status   of messages properly is 60.9 or 60 something.


On 1/15/2020 1:06 PM, John Isige wrote:

I just downloaded NVDA 2019.3beta2 and told it to continue running.
I'm
running Thunderbird 60.9.1, 32-bit if it matters. Message statuses
work
fine for me with up and down arrows, I didn't even have to close and
restart Thunderbird. What do you mean by saying "last fully
compatible
version"? What's broken? I admit I use Thunderbird pretty
minimally, but
everything seems fine to me.


On 1/15/2020 9:56, Ron Canazzi wrote:

Hi Group,

For some reason, when I installed 2019.3 beta 2, when I read the
status line and/or navigate with up/down arrow keys, the
read/unread
status of message is inconsistent or incorrect.

I wonder if anyone else is experiencing this issue.  I am using
Thunderbird 60.4--the last fully compatible version of Thunderbird.

Hey,

If I use keepass and want to sync my passwords across different devices, I have to rember two passwords. One for the database (Masterpassword) and one for the cloudprovider, right?

And so far as I know, is there no mobile app, which support 2fa.

 

At the moment I use lastpass. I am writing also a nvda add-on for the windows application 

Von meinem iPhone gesendet

Huh! I didn't even know that existed. FYI, there are two radio buttons,
"immediately on display" and "after (X) seconds". Mine was set to
"immediately on display", so I can see how there would be a problem if
the other option is set, because the default time seems to be five
seconds. So that's definitely something to check, as it would be easy
enough for it to hit that if you've got a lot of mail coming in.


On 1/16/2020 13:11, hurrikennyandopo ... wrote:

Hi


What have you got your message time out set to? Mine is set to 5
seconds otherwise I think they show as read.


In mozilla thunder bird go to tools then options then display then
advanced then under there is a setting to change your time out of your
messages. You might have to tab or arrow around to find it to change it.


Mine here reads the unread message as it status until I open it. I
think there was a setting in thunder bird so it could also save
replied etc but would have to look as have not used it for a long time.


Gene nz


On 17/01/2020 3:42 am, Ron Canazzi wrote:

Hi Clive,

For me, NVDA used to show numbers of unread messages in the tree view
of folders when you arrowed over them.  With release of 2019.3 beta
2, this no longer works for me.  Many others are not having this
problem, so there must be something going on with my system.


On 1/16/2020 6:44 AM, Clive Lever wrote:

Sorry if this has been covered before, but I notice that when I'm
reading the list of folders in my inbox (Outlook, Office 365), in
Jaws, it tells me how many unread messages there are in the folder.
NVDA doesn't do this, to my knowledge. If it can say the total
number of unread messages the way Jaws does, please can someone tell
me how to make it do so? It's particularly useful when, say, I come
back from holiday to hundreds of messages, as it tells me when the
backlog is cleared.

Thanks,
Clive



-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Ralf Kefferpuetz
Sent: Thursday, January 16, 2020 7:41 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Unread/Read Status of Messages Broken In
Thunderbird With 2019.3 Beta 2

I'm on 68.3.1 with NVDA 2019.3 beta 2 and all message flags are read
as usual.

Cheers,
   Ralf

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Ron
Canazzi
Sent: Donnerstag, 16. Januar 2020 01:13
To: nvda@nvda.groups.io
Subject: Re: [nvda] Unread/Read Status of Messages Broken In
Thunderbird With 2019.3 Beta 2

The last version of Thunderbird that reads the status line and the
read/unread status   of messages properly is 60.9 or 60 something.


On 1/15/2020 1:06 PM, John Isige wrote:

I just downloaded NVDA 2019.3beta2 and told it to continue running.
I'm
running Thunderbird 60.9.1, 32-bit if it matters. Message statuses
work
fine for me with up and down arrows, I didn't even have to close and
restart Thunderbird. What do you mean by saying "last fully compatible
version"? What's broken? I admit I use Thunderbird pretty
minimally, but
everything seems fine to me.


On 1/15/2020 9:56, Ron Canazzi wrote:

Hi Group,

For some reason, when I installed 2019.3 beta 2, when I read the
status line and/or navigate with up/down arrow keys, the read/unread
status of message is inconsistent or incorrect.

I wonder if anyone else is experiencing this issue.  I am using
Thunderbird 60.4--the last fully compatible version of Thunderbird.

I use docuScan with nvda every day including the v3 beta 2 version and it works well for me.


-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Richard Wells
Sent: Thursday, January 16, 2020 9:06 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Difficulty with PDF Document

Andrea: DocuScan is self-voicing. Shut down NVDA before starting it.
ALT+CONTROL+D is the default shortcut to start DocuScan.

On 1/16/2020 9:44 PM, Andrea Sherry wrote:

A member on this list recommended Docuscanplus as a scanning program
some time ago.
Till recently this program worked perfectly.
However approx 6 weeks ago the program just said "Unknown" when I
opened it to access a document.
Are there any users of this program on this list?
Has anyone had this experience?
If this is not the correct place to ask these questions, is there a
list for this product?
Andrea

A member on this list recommended Docuscanplus as a scanning program
some time ago.
Till recently this program worked perfectly.
However approx 6 weeks ago the program just said "Unknown" when I
opened it to access a document.
Are there any users of this program on this list?
Has anyone had this experience?
If this is not the correct place to ask these questions, is there a
list for this product?
Andrea

Yes I use chrome on mac os, didn't much care for it on iOs but I have it. And I use chrome on windows, not as my default, but it works. Use it for my twitch stuff as it is just easy to deal with and all of my pages and bookmarks sync over.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 16 Jan 2020, at 16:45, Arlene wrote:

Sarah, have you tried Chrome on your Mac ios? If you did, You probably would like Microsoft edge.

 

Sent from Mail for Windows 10

 

From: Sarah k Alawami
Sent: January 15, 2020 9:39 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] edge showstopper maybe

 

Exactgly. I move to have shawn band form this list as well. And yes I am calling him out publicly. This is why I hardly post on this list because of the thoughtless dribble he posts, it is just utter crap and utter nonsense.

Take care and blessings. And enjoy the new edge. Can't wait to get my hands on it on mac os. It rocks there.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 15 Jan 2020, at 14:23, Kevin Cussick via Groups.Io wrote:

Yes, good post and really this is just more of the same dribble that we have had over on the windows10 list.

On 15/01/2020 21:02, Brian Vogel wrote:

On Wed, Jan 15, 2020 at 02:44 PM, Shaun Everiss wrote:

still by mentioning the words alpha or beta it implies something that is
makeshift, not secure, not stable, could trash windows, could do who knows
what.

Neither of which is accurate in the world of software development.

Alpha is simply in the earliest stages of development, and may be unstable, but seldom if ever is any of the other things.

Beta is considered to be quite stable, and things released as beta by commercial and many open source entities are considered to be possible release candidates, but will not actually be designated as such until a beta has been used "in the wild" long enough to show that there are not unsuspected issues, most of which would be minor, but possibly annoying.

Alpha software carries a high risk for possible annoyance and failure of that software itself, and very seldom takes anything else along with it.

Beta software can generally be thought of as being stable, with some possible refinements at the periphery that may be needed.   It's not uncommon for something to go from beta to release sans any changes, either.

--

Brian *-* Windows 10 Pro, 64-Bit, Version 1909, Build 18363

Most of the change we think we see in life is due to truths being in and out of favor.

~ Robert Frost, The Black Cottage (1914)

 

A member on this list recommended Docuscanplus as a scanning program
some time ago.
Till recently this program worked perfectly.
However approx 6 weeks ago the program just said "Unknown" when I
opened it to access a document.
Are there any users of this program on this list?
Has anyone had this experience?
If this is not the correct place to ask these questions, is there a
list for this product?
Andrea

Thanks for all responses. Problem not resolved. I’m using a Bluetooth keyboard. Tried unchecking the

“(Trap All Non-Command Gestures”. I’ve uninstalled NVDA and reinstalled it. I’m very familiar with Browse mode and know that I need to be in it to do single key navigation. Since yesterday’s MS Edge and Windows updates, I can’t always tell if I’m in browse mode. When I press the NVDA key and the spacebar, NVDA goes silent and I get no audio feedback. Sometimes, Alt/Tabbing will get NVDA audio going again. MS Accessibility Desk was no help at all. Not sure what to do at this point.

Greg

Running the NVDA com registration tool didn’t solve the problem. Still don’t have single key navigation in any of my web browsers. Other suggestions? Thanks.

 

Greg

 

Hi,

LibreOffice is now very accessible because it is getting many updates
in short time (improvements, security fixes, etc.).

René

Sarah, have you tried Chrome on your Mac ios? If you did, You probably would like Microsoft edge.

 

Sent from Mail for Windows 10

 

From: Sarah k Alawami
Sent: January 15, 2020 9:39 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] edge showstopper maybe

 

Exactgly. I move to have shawn band form this list as well. And yes I am calling him out publicly. This is why I hardly post on this list because of the thoughtless dribble he posts, it is just utter crap and utter nonsense.

Take care and blessings. And enjoy the new edge. Can't wait to get my hands on it on mac os. It rocks there.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on youtube, twitch and mixer. Thanks Restream staff.

Finally, to become a patron and help support the podcast go here

On 15 Jan 2020, at 14:23, Kevin Cussick via Groups.Io wrote:

Yes, good post and really this is just more of the same dribble that we have had over on the windows10 list.

On 15/01/2020 21:02, Brian Vogel wrote:

On Wed, Jan 15, 2020 at 02:44 PM, Shaun Everiss wrote:

still by mentioning the words alpha or beta it implies something that is
makeshift, not secure, not stable, could trash windows, could do who knows
what.

Neither of which is accurate in the world of software development.

Alpha is simply in the earliest stages of development, and may be unstable, but seldom if ever is any of the other things.

Beta is considered to be quite stable, and things released as beta by commercial and many open source entities are considered to be possible release candidates, but will not actually be designated as such until a beta has been used "in the wild" long enough to show that there are not unsuspected issues, most of which would be minor, but possibly annoying.

Alpha software carries a high risk for possible annoyance and failure of that software itself, and very seldom takes anything else along with it.

Beta software can generally be thought of as being stable, with some possible refinements at the periphery that may be needed.   It's not uncommon for something to go from beta to release sans any changes, either.

--

Brian *-* Windows 10 Pro, 64-Bit, Version 1909, Build 18363

Most of the change we think we see in life is due to truths being in and out of favor.

~ Robert Frost, The Black Cottage (1914)