Date   
Re: cd i can not play a cd!

Gene
 

This should be in the chat group.  So, for respect for list rules, I won't reply further here.
 
You may be referring to autoplay, where CDs play automatically when you insert them.
I'd have to check to see how that is done.  I also don't know if the interface is the same for Windows 10 as for Windows 7.
But if you go to the CD drive in this computer or file explorer, then just press enter on the drive, an audio CD will play.
 
Gene

----- Original Message -----
Sent: Friday, January 24, 2020 12:35 PM
Subject: [nvda] cd i can not play a cd!

my see dees will not play how? do I get my c d's to play do I go
2controle pannal then settings?


cd i can not play a cd!

Chikodinaka mr. Oguledo
 

my see dees will not play how? do I get my c d's to play do I go
2controle pannal then settings?

Re: Is alt + p a nvda or a Windows command?

Gene
 

Did you look in the menus and see if there is an item that, when you move to it, announces p as the short cut?  Or it could be a menu itself, such as the file menu in menu programs or the edit menu as examples. 
 
Gene

----- Original Message -----
Sent: Friday, January 24, 2020 12:00 PM
Subject: Re: [nvda] Is alt + p a nvda or a Windows command?

Thank you to all who responded.  I just thought I had
seen Alt + P in either a Windows10 book I was reading or one of
the nvda documentation files I have but all of you were right.
The software is named gd-77s as it is specifically for a two-way
radio with that specific model number.  It is a Windows program
that allows one to load the radio with frequency power-level and
other important data so that the radio works properly on whatever
channels it is supposed to work on.

Alt + P opens up two choices for the user, Read and
Write.  Read is getting the radio's current program state by
connecting a usb cable to the radio and downloading it's current
configuration.  Writing involves pouring out the settings you
have configured from your computer to the radio.

When nvda is set to beep at various pitches depending on
the vertical position of the focus, the progress graphic becomes
audible as a series of ascending beeps.  It reminds me of a large
jug being filled or what somebody's cat might sound like walking
on a musical keyboard.

That turns out to be useful because the usb interface is
flaky and one has to keep connecting and disconnecting it before
the Read and Write operations work.  When they fail, you don't
get any kind of message but instead get dumped back to the main
program screen.

I come from the unix command-line world after 25 years of
writing C, perl and shell scripts plus almost 5 years of
retirement so Windows is a new world but I also have been using a
Mac for ten or so years making the GUI a little more familiar but
I still need to learn a lot.

Anyway, many thanks and I have a nvda question I'll save
for another message as this software is a perfect nvda training
tool as it makes constant use of NVDA + numpad-/ to change focus.

Martin McCormick

"Gene" <gsasner@...> writes:
> You may use it in this or that program.  But it is a program command. 
> Screen-readers wouldn't use such commands because they are too likely to
> interfere with program commands.  Alt and a letter or number while
> working with menus, is the standard way of executing a menu short cut. 
> That's another reason screen-readers wouldn't use it, that interface is
> already reserved and it would cause confusion.
>
> I am going into all this because I don't know if you have received the
> kind of training that made such things clear and it also may clarify
> things for others.
>
> Gene
> ----- Original Message -----
>
> From: Martin McCormick
> Sent: Tuesday, January 21, 2020 4:08 PM
> To: nvda@nvda.groups.io
> Subject: Re: [nvda] Is alt + p a nvda or a Windows command?
>
>
> Thank you.  That helps a lot.
> I got out of the software I was running and simply opened
> a new window and alt + p did nothing at all except that nvda
> echoed the key strokes.
>
> nvda and Windows10 both have a rich set of keyboard
> commands and I could have sworn that alt + p looked familiar.
>
> Martin
>
> "JM Casey" <jmcasey@...> writes:
> > It's definitely not an NVDA command. Any keystroke like that would be
> for
>
>
>
>
>
>


Re: Is alt + p a nvda or a Windows command?

Martin McCormick
 

Thank you to all who responded. I just thought I had
seen Alt + P in either a Windows10 book I was reading or one of
the nvda documentation files I have but all of you were right.
The software is named gd-77s as it is specifically for a two-way
radio with that specific model number. It is a Windows program
that allows one to load the radio with frequency power-level and
other important data so that the radio works properly on whatever
channels it is supposed to work on.

Alt + P opens up two choices for the user, Read and
Write. Read is getting the radio's current program state by
connecting a usb cable to the radio and downloading it's current
configuration. Writing involves pouring out the settings you
have configured from your computer to the radio.

When nvda is set to beep at various pitches depending on
the vertical position of the focus, the progress graphic becomes
audible as a series of ascending beeps. It reminds me of a large
jug being filled or what somebody's cat might sound like walking
on a musical keyboard.

That turns out to be useful because the usb interface is
flaky and one has to keep connecting and disconnecting it before
the Read and Write operations work. When they fail, you don't
get any kind of message but instead get dumped back to the main
program screen.

I come from the unix command-line world after 25 years of
writing C, perl and shell scripts plus almost 5 years of
retirement so Windows is a new world but I also have been using a
Mac for ten or so years making the GUI a little more familiar but
I still need to learn a lot.

Anyway, many thanks and I have a nvda question I'll save
for another message as this software is a perfect nvda training
tool as it makes constant use of NVDA + numpad-/ to change focus.

Martin McCormick

"Gene" <gsasner@...> writes:

You may use it in this or that program. But it is a program command.
Screen-readers wouldn't use such commands because they are too likely to
interfere with program commands. Alt and a letter or number while
working with menus, is the standard way of executing a menu short cut.
That's another reason screen-readers wouldn't use it, that interface is
already reserved and it would cause confusion.

I am going into all this because I don't know if you have received the
kind of training that made such things clear and it also may clarify
things for others.

Gene
----- Original Message -----

From: Martin McCormick
Sent: Tuesday, January 21, 2020 4:08 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Is alt + p a nvda or a Windows command?


Thank you. That helps a lot.
I got out of the software I was running and simply opened
a new window and alt + p did nothing at all except that nvda
echoed the key strokes.

nvda and Windows10 both have a rich set of keyboard
commands and I could have sworn that alt + p looked familiar.

Martin

"JM Casey" <jmcasey@...> writes:
It's definitely not an NVDA command. Any keystroke like that would be
for





Re: new version of Edge and setting language Czech

 

Hallo in the list,

go to page edge://settings/languages. Add Czech language, then you can set Czech as a preferred language to display Edge in it. Cannot say exactly how all elements are named, I have Edge in Czech language.

Josef

__________ __________ __________ __________ __________ __________ __________ __________




pá 24. 1. 2020 v 11:46 odesílatel Jarek.Krcmar <Jarek.Krcmar@...> napsal:

Hi group,

I would like to know, whether is possible set czech language in the Edge
chromium.

I have tried find the setting, but I was unsuccessful.

Do you have an idea, how I could be successful?


--
Jarek




Re: Is alt + p a nvda or a Windows command?

Cecelia Rodriguez <cessbraille@...>
 

Windows

On Jan 21, 2020, at 4:31 PM, Martin McCormick <martin.m@...> wrote:

 I was listening to a demo of some software when someone
needed to upload a file from their computer to an attached radio
and they used alt + p. This gives you two alternatives, r and w
which is easy enough to follow so far except that I get that
unceremonious dumpout you get when you hit the wrong button and
the effect is the same as typing Escape. You just go back to
whatever was going on before typing alt + p.

Thanks.

Martin McCormick


Re: new version of Edge and setting language Czech

hurrikennyandopo ...
 

Hi


It looks as though you have to do a search for it  then the results will come up.


so when the new edge is open press the alt key go down to settings then press the enter key when the next page comes up with the setting in the search box type languages it will then search for those results and give you about 4 of them Under one of them i could do my preferred languages etc or have it set to translate etc for me to another language.


Gene nz

On 24/01/2020 11:46 pm, Jarek.Krcmar wrote:
Hi group,

I would like to know, whether is possible set czech language in the Edge chromium.

I have tried find the setting, but I was unsuccessful.

Do you have an idea, how I could be successful?

new version of Edge and setting language Czech

Jarek.Krcmar
 

Hi group,

I would like to know, whether is possible set czech language in the Edge chromium.

I have tried find the setting, but I was unsuccessful.

Do you have an idea, how I could be successful?


--
Jarek

Re: Nvda and Total Commander

john s
 

Ollie, thanks.

At 12:30 PM 1/23/2020, Mallard, wrote:
Hello,


It's a two-panel file manager.


The programme is shareware; you can keep it for 30 days without registering, but it continues to fully function even afterthat - actually forever.


I don't know how much it would cost now. I bought so many years ago...


In order to activate the proramme when you open it, if it isn't registered, you simply have to press one of teh numbers on the keyboard - 1, 2 or 3Â which is presented at random with each new launching ofthe programme.


You'll hear:


1 button

2 button

3 button


1 1


for example.


You'll have to type the number that doesn't say button after it, bu is repeated twice instead - in this example, 1 1 = type 1 on the keyboard...


After tat the programme will be fully functional.


It has loads of options, and a considerable number of plugins and extensions, but not many are accessible, so I don't use those.


The Android version is free.


hth, ciao,

Ollie




On 23/01/2020 12:20, john s wrote:
Ollie, what does this program do and how much does it cost?

At 05:23 AM 1/23/2020, Mallard, wrote:
Hello Quentin,


There are other issues, especially in the forms to set up ftp connections, but those can't be solved, apparently.


Ciao,

Ollie




On 22/01/2020 23:03, Quentin Christensen wrote:
Hi Jarek,

I'm not familiar with the program, but if NVDA is working everywhere except for announcing these two buttons, it sounds like the developers of Total Commander has simply forgotten to label them. The easiest solution is to contact the developer of Total Commander and let them know and request they please label those two buttons.

Kind regards

Quentin.

On Wed, Jan 22, 2020 at 10:20 PM Jarek.Krcmar <Jarek.Krcmar@... <mailto:Jarek.Krcmar@...>> wrote:

   Hello all,

   After starting Total Commander I select the mass re-naming in Total
   Commander, Nvda is mute by two buttons.

   I would like to know, what can I do for Nvda should be speaking.

   Nvda speaks everywhere, but by a two buttons it is mute.


   --    Jarek






--
Quentin Christensen
Training and Support Manager

Web: www.nvaccess.org <http://www.nvaccess.org/>
Training: https://www.nvaccess.org/shop/
Certification: https://certification.nvaccess.org/
User group: https://nvda.groups.io/g/nvda
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess <https://twitter.com/NVAccess>
               John

John

Re: Reader mode in Chrome?

Gene
 

It may not be a good idea to save things in Reader Mode even if you can.  Reader Mode does a good job of presenting something like an article while stripping out extraneous material but, unless you have read the text you will be saving first, you don't definitely know that it has done everything correctly.  If you haven't read everything first and want to take a chance, then you may want to save the material.  It probably will be alright but I don't trust such processes, unsupervised, to always produce the results I want and I don't want to save material processed in that way without having read it first.
 
I tested saving a page as Web Page, HTML only.  I didn't test other options; This was with an old version of Firefox.  The page didn't save properly.  I don't know what would have happened with other options. 
 
Regardless of what you can or can't save in Reader View, I would think you could save text in reader view by selecting all, control a, copy to the clipboard, paste it into Notepad, and saving it.  I didn't test that.
 
Gene

----- Original Message -----
From: Arlene
Sent: Thursday, January 23, 2020 9:55 PM
Subject: Re: [nvda] Reader mode in Chrome?

Not sure. If you got the older version of it that works with xp.  I really would not know if you can do this with an over version of firefox. If you can great.

 

Sent from Mail for Windows 10

 

From: zahra
Sent: January 23, 2020 6:07 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Reader mode in Chrome?

 

how about firefox?

i wish to save my pages as html only in reader mode.

 

On 1/24/20, ADRIAN POCOCK <ampbeast@...> wrote:

> Try just read or mercury reader.  Just reader when you right click on page

> and save as it allows single html which is read by nvda.

>

 

 

--

By God,

were I given all the seven heavens

with all they contain

in order that

I may disobey God

by depriving an ant

from the husk of a grain of barley,

I would not do it.

imam ali

 

 

 

Re: Accessible password managers, again.

junior
 

Can I import autofill from google into this app?

----- Original Message -----
From: "Mallard" <mallard@...>
To: <nvda@nvda.groups.io>
Sent: Thursday, January 23, 2020 2:33 PM
Subject: Re: [nvda] Accessible password managers, again.


Thanks for this recommendation.


My husband and son recommended this to me too, but they're sighted, so I
was going to check it out for accessibility.


You've saved me one step...


thanksagain.

Ciao,

Ollie




On 16/01/2020 01:51, DJ wrote:
KeePass makes it extremely easy to synchronize your database between devices. In fact, if I update the database on my local computer, it is automatically updated on my iPhone and iPad. Likewise if I update on the iPhone or iPad, it is also updated on my computer. It is free and very secure.

On Wed, Jan 15, 2020 at 5:13 PM Nimer Jaber <nimerjaber1@... <mailto:nimerjaber1@...>> wrote:

Hello,

While it's true that 1password has cloud options, and keypass is
local, 1password makes password syncing between devices much
easier. Moreover, 1password is secured with a key and now also
with 2FA, thus making the likelihood that my password gets
compromised that much more unlikely. In fact, I trust 1password
with its layers of security over just about any other cloud
provider which I might choose to use to store my database and have
it synced. And yes, I could choose to just keep it offline, but
that just isn't convenient. :-D

Tyler's right though, everyone should make those considerations
for themselves about what level of risk they are willing to
tolerate, and how they choose to perceive the risk.

Thanks.

On Wed, Jan 15, 2020 at 2:06 PM Tyler Wood <tcwood12@...
<mailto:tcwood12@...>> wrote:

Hi,

My go to will always be key pass.

Free, open source, ability to put your database **wherever**
you want, easy to run on any operating system of your choice
and lots of configuration options.

I will never touch 1 password – for one it’s paid – and for 2
having my passwords in the cloud when that cloud could be
breached at any moment much easier than my database on a thumb
drive, and has been before. Why have a password manager at all
in that case?

That is, of course, my opinion, and common sense is still
one’s best friend.

*From:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
<nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>> *On Behalf
Of *Nimer Jaber
*Sent:* Wednesday, January 15, 2020 3:20 PM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* Re: [nvda] Accessible password managers, again.

Chrome should work, as should Firefox, but you want a
3rd-party, which is probably smart, give 1password a try.
Also, I played around with bitwarden, and it seemed to work
pretty well also.

Thanks.

On Wed, Jan 15, 2020 at 1:09 PM Hareth <hareth4m@...
<mailto:hareth4m@...>> wrote:

I was playing with
bitwarden
on windows10, desktop app an chrome and waterfox / firefox
extensions.
I start liking it
,.
Later tonight, going to try the android app and see what's
going on there.
For sure it worth the try.

On 1/15/20, René Linke <rene.linke@...
<mailto:rene.linke@...>> wrote:
> Hi,
>
> I recommend to use KeePass Safe, it is completely based
on XML
> structures of import/export files.
> It has many extensions, and it works well with NVDA.
>
> René
>
>
>
>
>



--

Best,

Nimer Jaber

The message above is intended for the recipient to whom it was
addressed. If you believe that you are not the intended recipient,
please notify me via reply email and destroy all copies of this
correspondence. Action taken as a result of this email or its
contents
by anyone other than the intended recipient(s) may result in
civil or
criminal charges. I have checked this email and all corresponding
attachments for security threats. However, security of your
machine is
up to you. Thanks.

Registered Linux User 529141.
http://counter.li.org/

To find out about a free and versatile screen reader for
windows XP
and above, please click here:
http://www.nvda-project.org

You can follow @nimerjaber on Twitter for the latest
technology news.

To contact me, you can reply to this email or you may call me
at (970) (393-4481) and I will do my best to respond to you
promptly. Thank
you, and have a great day!



--
Best,

Nimer Jaber

The message above is intended for the recipient to whom it was
addressed. If you believe that you are not the intended recipient,
please notify me via reply email and destroy all copies of this
correspondence. Action taken as a result of this email or its contents
by anyone other than the intended recipient(s) may result in civil or
criminal charges. I have checked this email and all corresponding
attachments for security threats. However, security of your machine is
up to you. Thanks.

Registered Linux User 529141.
http://counter.li.org/

To find out about a free and versatile screen reader for windows XP
and above, please click here:
http://www.nvda-project.org

You can follow @nimerjaber on Twitter for the latest technology news.

To contact me, you can reply to this email or you may call me at
(970) (393-4481) and I will do my best to respond to you promptly.
Thank
you, and have a great day!




----------
WhatsApp:
+5522998024703
Telegram:
@TecladistaJR
Skype:
live:tadeu.junior.tecladista_2
----------

Re: Reader mode in Chrome?

Arlene
 

Not sure. If you got the older version of it that works with xp.  I really would not know if you can do this with an over version of firefox. If you can great.

 

Sent from Mail for Windows 10

 

From: zahra
Sent: January 23, 2020 6:07 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Reader mode in Chrome?

 

how about firefox?

i wish to save my pages as html only in reader mode.

 

On 1/24/20, ADRIAN POCOCK <ampbeast@...> wrote:

> Try just read or mercury reader.  Just reader when you right click on page

> and save as it allows single html which is read by nvda.

>

 

 

--

By God,

were I given all the seven heavens

with all they contain

in order that

I may disobey God

by depriving an ant

from the husk of a grain of barley,

I would not do it.

imam ali

 

 

 

Re: Reader mode in Chrome?

 

how about firefox?
i wish to save my pages as html only in reader mode.

On 1/24/20, ADRIAN POCOCK <ampbeast@...> wrote:
Try just read or mercury reader. Just reader when you right click on page
and save as it allows single html which is read by nvda.



--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali

Re: Tutorial: Disable UI Automation in the Chromium Edge.

Arlene
 

You can do that. But what if your friends ask you how do you know about it when you are still using xp? It would better help you if you did upgrade to windows ten. 

 

Sent from Mail for Windows 10

 

From: zahra
Sent: January 23, 2020 11:50 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Tutorial: Disable UI Automation in the Chromium Edge.

 

yes, the new edge support all versions of windows since windows seven.

but the old edge was specific for windows ten.

yes, i have xp, but i want to know about new edge too.

 

On 1/23/20, Arlene <nedster66@...> wrote:

> Well then it may not work for xp.  If you are still using it.  I thought

> edge is only for ten.

> Sent from Mail for Windows 10

> From: zahra

> Sent: January 23, 2020 11:05 AM

> To: nvda@nvda.groups.io

> Subject: Re: [nvda] Tutorial: Disable UI Automation in the Chromium Edge.

> its not specific for windows ten only.

> new edge support all windows versions since windows seven.

> On 1/23/20, Arlene <nedster66@...> wrote:

>> If you are continuing xp I don’t think you can try Chromian Edge. Not

>> unless

>> you upgrade to windows ten.  If you end up on windows ten. You wil have

>> yourself a learning curve.  You will get used to it.  Edge and Chrome are

>> a

>> like if you have used firefox.  They are like firefox.  Windows ten takes

>> getting used to.  You can do it.  I’m afraid you can’t test these new

>> things

>> with xp!  If you intend on staying there.  It wont hurt to ask questions

>> I’ll tell you this. Either way you will end up on windows ten sooner or

>> later.

>> 

>> 

>> 

>> Sent from Mail for Windows 10

>> 

>> 

>> 

>> From: zahra

>> Sent: January 23, 2020 4:05 AM

>> To: nvda@nvda.groups.io

>> Subject: Re: [nvda] Tutorial: Disable UI Automation in the Chromium Edge.

>> 

>> 

>> 

>> hi.

>> 

>> some people mentioned crashing when using nvda with new edge based on

>> chromium.

>> 

>> is it true?

>> 

>> i really wish to become familiar with new edge, and want to ask some

>> questions.

>> 

>> does it support MultiProcess forever?

>> 

>> is there a setting to turn the Multiprocess off?

>> 

>> also, does it have all the settings and options that chrome and chromium

>> have?

>> 

>> does it support flash?

>> 

>> can we uncheck automatic update or not?

>> 

>> i really wish if someone knows answers for my questions, post the answers

>> hear.

>> 

>> God bless you and His especial mercy i pray for you!

>> 

>> 

>> 

>> On 1/15/20, Robert Kingett <kingettr@...> wrote:

>> 

>>> Joseph posted this previously, but I am busy [giving fiction to my

>>> patreon

>> 

>>> supporters](http://www.patreon.com/blindwriter) so can't pull up his link

>> 

>>> right now.

>> 

>>> 

>> 

>>> NVDA 2019.2 won't work with Edge without turning off UIA. The more tech

>> 

>>> savvy people on this list can tell you if NVDA 2019.3 will work with it

>>> on

>> 

>>> or not. For now, I've turned my UIA in Edge back on. Below though, is

>>> steps

>> 

>>> on how to turn it off.

>> 

>>> 

>> 

>>> In the address bar, type,

>> 

>>> 

>> 

>>> 

>> 

>>> edge://flags

>> 

>>> 

>> 

>>> 

>> 

>>> Tab to search experimentation's.

>> 

>>> 

>> 

>>> 

>> 

>>> Type,

>> 

>>> 

>> 

>>> 

>> 

>>> UI Automation.

>> 

>>> 

>> 

>>> 

>> 

>>> Hit tab until you get to a combo box.

>> 

>>> 

>> 

>>> enable it or disable it.

>> 

>>> 

>> 

>>> Happy Browsing! In the meantime, I'm creating disability fiction. [Pledge

>>> to

>> 

>>> see early drafts and more.](http://www.patreon.com/blindwriter)

>> 

>>> 

>> 

>>> 

>> 

>>> 

>> 

>>> 

>> 

>> 

>> 

>> 

>> 

>> --

>> 

>> By God,

>> 

>> were I given all the seven heavens

>> 

>> with all they contain

>> 

>> in order that

>> 

>> I may disobey God

>> 

>> by depriving an ant

>> 

>> from the husk of a grain of barley,

>> 

>> I would not do it.

>> 

>> imam ali

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

> --

> By God,

> were I given all the seven heavens

> with all they contain

> in order that

> I may disobey God

> by depriving an ant

> from the husk of a grain of barley,

> I would not do it.

> imam ali

>

 

 

--

By God,

were I given all the seven heavens

with all they contain

in order that

I may disobey God

by depriving an ant

from the husk of a grain of barley,

I would not do it.

imam ali

 

 

 

Re: Reader mode in Chrome?

ADRIAN POCOCK
 

Try just read or mercury reader.  Just reader when you right click on page and save as it allows single html which is read by nvda.

Re: In-Process is out

Kevin Cussick
 

this has already been discussed at some length! and it can not be done sorry.

On 23/01/2020 11:09, zahra wrote:
hi quentin.
i could not access my system for one week, so pardon my late reply.
about renaming the version number of nvda, could you please rename it 2020.1?
since 2020 started and even january is near ending!
if possible, i wish that you rename it to 2020.1.
God bless you and His infinite mercy i pray for you!
On 1/16/20, Quentin Christensen <quentin@...> wrote:
Hi everyone,

The first In-Process for the year is here!

Featuring news on NVDA 2019.3 beta2, who should update and lots more, get
it first here: https://www.nvaccess.org/post/in-process-16th-january/

Quentin.
--
Quentin Christensen
Training and Support Manager

Web: www.nvaccess.org
Training: https://www.nvaccess.org/shop/
Certification: https://certification.nvaccess.org/
User group: https://nvda.groups.io/g/nvda
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess <https://twitter.com/NVAccess>



Re: Nvda and Total Commander

Mallard
 

Thanks Ralf. I'll check it out.

Ciao,

Ollie

On 23/01/2020 20:09, Ralf Kefferpuetz wrote:
And I wrote an addon for it, see here:
https://github.com/Novalis7747/totalcmd-enhanced/raw/master/totalcmd-0.6.3.nvda-addon

cheers,
Ralf

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Mallard
Sent: Donnerstag, 23. Januar 2020 18:31
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda and Total Commander

Oh... One more note: you can access ftp's with it, and it works great for that porpose.





On 23/01/2020 12:20, john s wrote:
Ollie, what does this program do and how much does it cost?

At 05:23 AM 1/23/2020, Mallard, wrote:
Hello Quentin,


There are other issues, especially in the forms to set up ftp
connections, but those can't be solved, apparently.


Ciao,

Ollie




On 22/01/2020 23:03, Quentin Christensen wrote:
Hi Jarek,

I'm not familiar with the program, but if NVDA is working everywhere
except for announcing these two buttons, it sounds like the
developers of Total Commander has simply forgotten to label them.Â
The easiest solution is to contact the developer of Total Commander
and let them know and request they please label those two buttons.

Kind regards

Quentin.

On Wed, Jan 22, 2020 at 10:20 PM Jarek.Krcmar <Jarek.Krcmar@...
<mailto:Jarek.Krcmar@...>> wrote:

Hello all,

After starting Total Commander I select the mass re-naming in Total
Commander, Nvda is mute by two buttons.

I would like to know, what can I do for Nvda should be speaking.

Nvda speaks everywhere, but by a two buttons it is mute.


-- Jarek






--
Quentin Christensen
Training and Support Manager

Web: www.nvaccess.org <http://www.nvaccess.org/>
Training: https://www.nvaccess.org/shop/
Certification: https://certification.nvaccess.org/
User group: https://nvda.groups.io/g/nvda
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess <https://twitter.com/NVAccess>
John






Re: Tutorial: Disable UI Automation in the Chromium Edge.

 

yes, the new edge support all versions of windows since windows seven.
but the old edge was specific for windows ten.
yes, i have xp, but i want to know about new edge too.

On 1/23/20, Arlene <nedster66@...> wrote:
Well then it may not work for xp.  If you are still using it.  I thought
edge is only for ten.



Sent from Mail for Windows 10



From: zahra
Sent: January 23, 2020 11:05 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Tutorial: Disable UI Automation in the Chromium Edge.



its not specific for windows ten only.

new edge support all windows versions since windows seven.





On 1/23/20, Arlene <nedster66@...> wrote:

If you are continuing xp I don’t think you can try Chromian Edge. Not
unless
you upgrade to windows ten.  If you end up on windows ten. You wil have
yourself a learning curve.  You will get used to it.  Edge and Chrome are
a
like if you have used firefox.  They are like firefox.  Windows ten takes
getting used to.  You can do it.  I’m afraid you can’t test these new
things
with xp!  If you intend on staying there.  It wont hurt to ask questions
I’ll tell you this. Either way you will end up on windows ten sooner or
later.
Sent from Mail for Windows 10
From: zahra
Sent: January 23, 2020 4:05 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Tutorial: Disable UI Automation in the Chromium Edge.
hi.
some people mentioned crashing when using nvda with new edge based on
chromium.
is it true?
i really wish to become familiar with new edge, and want to ask some
questions.
does it support MultiProcess forever?
is there a setting to turn the Multiprocess off?
also, does it have all the settings and options that chrome and chromium
have?
does it support flash?
can we uncheck automatic update or not?
i really wish if someone knows answers for my questions, post the answers
hear.
God bless you and His especial mercy i pray for you!
On 1/15/20, Robert Kingett <@blindjourno> wrote:
Joseph posted this previously, but I am busy [giving fiction to my
patreon
supporters](http://www.patreon.com/blindwriter) so can't pull up his link
right now.
NVDA 2019.2 won't work with Edge without turning off UIA. The more tech
savvy people on this list can tell you if NVDA 2019.3 will work with it
on
or not. For now, I've turned my UIA in Edge back on. Below though, is
steps
on how to turn it off.
In the address bar, type,
edge://flags
Tab to search experimentation's.
Type,
UI Automation.
Hit tab until you get to a combo box.
enable it or disable it.
Happy Browsing! In the meantime, I'm creating disability fiction. [Pledge
to
see early drafts and more.](http://www.patreon.com/blindwriter)
--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali




--

By God,

were I given all the seven heavens

with all they contain

in order that

I may disobey God

by depriving an ant

from the husk of a grain of barley,

I would not do it.

imam ali







--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali

Re: Tutorial: Disable UI Automation in the Chromium Edge.

Arlene
 

Well then it may not work for xp.  If you are still using it.  I thought edge is only for ten.

 

Sent from Mail for Windows 10

 

From: zahra
Sent: January 23, 2020 11:05 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Tutorial: Disable UI Automation in the Chromium Edge.

 

its not specific for windows ten only.

new edge support all windows versions since windows seven.

 

 

On 1/23/20, Arlene <nedster66@...> wrote:

> If you are continuing xp I don’t think you can try Chromian Edge. Not unless

> you upgrade to windows ten.  If you end up on windows ten. You wil have

> yourself a learning curve.  You will get used to it.  Edge and Chrome are a

> like if you have used firefox.  They are like firefox.  Windows ten takes

> getting used to.  You can do it.  I’m afraid you can’t test these new things

> with xp!  If you intend on staying there.  It wont hurt to ask questions

> I’ll tell you this. Either way you will end up on windows ten sooner or

> later.

> Sent from Mail for Windows 10

> From: zahra

> Sent: January 23, 2020 4:05 AM

> To: nvda@nvda.groups.io

> Subject: Re: [nvda] Tutorial: Disable UI Automation in the Chromium Edge.

> hi.

> some people mentioned crashing when using nvda with new edge based on

> chromium.

> is it true?

> i really wish to become familiar with new edge, and want to ask some

> questions.

> does it support MultiProcess forever?

> is there a setting to turn the Multiprocess off?

> also, does it have all the settings and options that chrome and chromium

> have?

> does it support flash?

> can we uncheck automatic update or not?

> i really wish if someone knows answers for my questions, post the answers

> hear.

> God bless you and His especial mercy i pray for you!

> On 1/15/20, Robert Kingett <kingettr@...> wrote:

>> Joseph posted this previously, but I am busy [giving fiction to my patreon

>> supporters](http://www.patreon.com/blindwriter) so can't pull up his link

>> right now.

>> 

>> NVDA 2019.2 won't work with Edge without turning off UIA. The more tech

>> savvy people on this list can tell you if NVDA 2019.3 will work with it on

>> or not. For now, I've turned my UIA in Edge back on. Below though, is

>> steps

>> on how to turn it off.

>> 

>> In the address bar, type,

>> 

>> 

>> edge://flags

>> 

>> 

>> Tab to search experimentation's.

>> 

>> 

>> Type,

>> 

>> 

>> UI Automation.

>> 

>> 

>> Hit tab until you get to a combo box.

>> 

>> enable it or disable it.

>> 

>> Happy Browsing! In the meantime, I'm creating disability fiction. [Pledge

>> to

>> see early drafts and more.](http://www.patreon.com/blindwriter)

>> 

>> 

>> 

>> 

> --

> By God,

> were I given all the seven heavens

> with all they contain

> in order that

> I may disobey God

> by depriving an ant

> from the husk of a grain of barley,

> I would not do it.

> imam ali

>

 

 

--

By God,

were I given all the seven heavens

with all they contain

in order that

I may disobey God

by depriving an ant

from the husk of a grain of barley,

I would not do it.

imam ali

 

 

 

Re: Reader mode in Chrome?

Jim O'Sullivan
 

Try changing the shortcut on your desktop for Chrome.
Point to it and press alt+enter
Change the command to something like:
"C:\Program Files (x86)\Google\Chrome\Application\chrome.exe" --enable-dom-distiller
This may be slightly different if you have Chrome installed in a different directory.
Enter to come out of that and go back to desktop.
Close any running Chromes.
Run Chrome now using this desktop shortcut and get the menu up with alt+f
up-arrow a few times and you should find a toggle distill page
enter on this and this is similar to reader mode.
To get back to normal view just go back into the menu and toggle it off.

Jim

On 23/01/2020 11:22, zahra wrote:
what is the last version of chrome which supports reader mode?
On 1/17/20, Geoff Connor <gjconnor@...> wrote:
Unfortunately, as far as I know, Chrome removed that feature. I'm
disappointed about that. It really worked well. I hope they eventually put
it back.