Date   

Re: NVDA restarts when I go to Github page from Run dialog

hurrikennyandopo ...
 

Hi


If I remember right it might be in this release when you type nvda into the run dialogue it will re start nvda if it is the installer version.


Maybe because when you typed in the web address with nvda in it it restarted nvda thinking you wanted to restart it?


Gene nz


On 29/01/2020 7:45 am, Nicolai Svendsen wrote:

Hi,

 

Just to summarize, so everyone is on point:

 

As I originally stated, both in the subject line and original post, entering www.github.com/nvaccess/nvda into the run dialog box, certainly using Win+R, causes NVDA to restart as if I had just entered nvdaa instead. It ignores everything else except nvdaa. This is the only application where this happens. Appending a second a after nvdaa causes the default browser to launch, showing the URL as www.github.com/nvaccess/nvdaa. So, the only case where it ignores the entire address is when nvdaa is entered following the / (slash), but anything else appended to nvdaa causes the entire entry to be recognized properly, with the URL obviously being incorrect then.

 

It doesn’t matter which browser is the default one. Just for the sake of humor, I did this using Microsoft edge Beta, Microsoft Edge, Google Crome, Mozilla Firefox and even Internet Explorer as default browsers. Nothing visually happens on screen. You’re just bounced back to the desktop, the dialog closes, and NVDA restarts. It also does not matter whether NVDA is already running or not when doing this. It turns out that NVDA launches regardless, even if you exit the application, right click the start button, click “Run”, then enter in www.github.com/nvaccess/nvda.

 

Also, it doesn’t have to be that particular addressor any address at all. As long as it ends with /nvdaa, it does this. Apparently, even if it is thisissuperweird/nvdaa or stopdoingthis/nvda.

 

Maybe that last one is a clue to somebody. If it isn’t, I’ll probably figure it out tomorrow when I get back to work and have multiple configurations to test and modify that isn’t my own. I reiterate that this only happens with NVDA, and no other application so far. Windows rightly doesn’t recognize thisissuperweird followed by anything else after a  (slash), except if it is nvdaa, no matter what it is I enter before it.

 

I don’t think I can make that any clearer or long-winded.

 

Nicolai

 

 

 

Sendt fra Mail til Windows 10

 

Fra: Sarah k Alawami
Sendt: 28. januar 2020 18:56
Til: nvda@nvda.groups.io
Emne: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

 

No, as clearly stated, he is typing the whole address. Nvda appears to restart. Have you tired this with edge, or firefox? I believe you said you did this with chrome. Can you try whit with the control l, then typing in that address you gave? Also can you screen record this behavior so we may take a look at it? You can upload it to keybase or something so those of us with sight can look.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on [twitch.](twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

Finally, to become a patron and help support the podcast go here

On 28 Jan 2020, at 9:54, Gene wrote:

We need to be clear about what you are doing.  Are you talking about the run dialog, Windows key being held and r or the start menu search, press the windows key, then type something.  None of the behavior you are describing matches the run dialog.  Typing NVDA should produce an error message because you haven't typed the path to the folder containing the executable first.  Typing NVDAA should also present an error message.  Using the start menu may produce the results you are describing if you type something and the first result is something you want and you press enter on it. 

 

As I said, you are running the NVDA executable, which I strongly suspect you are running from the start menu search.

 

Gene

----- Original Message -----

Sent: Tuesday, January 28, 2020 11:46 AM

Subject: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

 

You are running the NVDA exe file again.  NVDA is restarting.  NVDAA isn't running the exe file, though I don't seee why the browser would open, that isn't any sort of web site address.

 

Gene

----- Original Message -----

Sent: Tuesday, January 28, 2020 10:57 AM

Subject: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

 

Hello Brian,

 

I have used both Firefox and Google Chrome for this. At first I thought it was getting cut off as well, since NVDA will restart if you only type nvda into the run dialog, but that doesn’t appear to be the case. If I type nvdaa instead of nvdaa, it doesn’t restart, but goes on to open the browser with the corresponding webpage address. If I enter nvda instead, NVDA just restarts and nothing else happens. It only happens with NVDA, and no other applications that can be launched from the run dialog box.

 

So this is kind of bizarre. I’m not really sure why this would occur at all. I’ve never had trouble actually doing this before.

 

Nicolai

 

Sendt fra Mail til Windows 10

 

Fra: Brian Vogel
Sendt: 28. januar 2020 17:38
Til: nvda@nvda.groups.io
Emne: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

 

Nicolai,

          What web browser is set as your default?   It would be worth testing to see if this might somehow be linked to the browser being used, as odd as that might seem.

           The more you can narrow this down to a specific set of circumstances the better.

           I can imagine NVDA shutting down if the only thing being seen in the run dialog were to be NVDA.  Are you absolutely, positively certain that the entire URL was there?

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Power is being told you're not loved and not being destroyed by it.

       ~ Madonna

 

 

 

 


Re: NVDA restarts when I go to Github page from Run dialog

Gene
 

If so, this isn't the original subject line and I didn't keep the original message and I didn't recall how things were stated.  That's odd and I have no idea why.  Using things like book marks search features, I find it more convenient to work directly in the browser than to use the run dialog to open web pages. 
 
Gene

----- Original Message -----
Sent: Tuesday, January 28, 2020 12:45 PM
Subject: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

Hi,

 

Just to summarize, so everyone is on point:

 

As I originally stated, both in the subject line and original post, entering www.github.com/nvaccess/nvda into the run dialog box, certainly using Win+R, causes NVDA to restart as if I had just entered nvdaa instead. It ignores everything else except nvdaa. This is the only application where this happens. Appending a second a after nvdaa causes the default browser to launch, showing the URL as www.github.com/nvaccess/nvdaa. So, the only case where it ignores the entire address is when nvdaa is entered following the / (slash), but anything else appended to nvdaa causes the entire entry to be recognized properly, with the URL obviously being incorrect then.

 

It doesn’t matter which browser is the default one. Just for the sake of humor, I did this using Microsoft edge Beta, Microsoft Edge, Google Crome, Mozilla Firefox and even Internet Explorer as default browsers. Nothing visually happens on screen. You’re just bounced back to the desktop, the dialog closes, and NVDA restarts. It also does not matter whether NVDA is already running or not when doing this. It turns out that NVDA launches regardless, even if you exit the application, right click the start button, click “Run”, then enter in www.github.com/nvaccess/nvda.

 

Also, it doesn’t have to be that particular addressor any address at all. As long as it ends with /nvdaa, it does this. Apparently, even if it is thisissuperweird/nvdaa or stopdoingthis/nvda.

 

Maybe that last one is a clue to somebody. If it isn’t, I’ll probably figure it out tomorrow when I get back to work and have multiple configurations to test and modify that isn’t my own. I reiterate that this only happens with NVDA, and no other application so far. Windows rightly doesn’t recognize thisissuperweird followed by anything else after a  (slash), except if it is nvdaa, no matter what it is I enter before it.

 

I don’t think I can make that any clearer or long-winded.

 

Nicolai

 

 

 

Sendt fra Mail til Windows 10

 

Fra: Sarah k Alawami
Sendt: 28. januar 2020 18:56
Til: nvda@nvda.groups.io
Emne: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

 

No, as clearly stated, he is typing the whole address. Nvda appears to restart. Have you tired this with edge, or firefox? I believe you said you did this with chrome. Can you try whit with the control l, then typing in that address you gave? Also can you screen record this behavior so we may take a look at it? You can upload it to keybase or something so those of us with sight can look.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on [twitch.](twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

Finally, to become a patron and help support the podcast go here

On 28 Jan 2020, at 9:54, Gene wrote:

We need to be clear about what you are doing.  Are you talking about the run dialog, Windows key being held and r or the start menu search, press the windows key, then type something.  None of the behavior you are describing matches the run dialog.  Typing NVDA should produce an error message because you haven't typed the path to the folder containing the executable first.  Typing NVDAA should also present an error message.  Using the start menu may produce the results you are describing if you type something and the first result is something you want and you press enter on it. 

 

As I said, you are running the NVDA executable, which I strongly suspect you are running from the start menu search.

 

Gene

----- Original Message -----

Sent: Tuesday, January 28, 2020 11:46 AM

Subject: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

 

You are running the NVDA exe file again.  NVDA is restarting.  NVDAA isn't running the exe file, though I don't seee why the browser would open, that isn't any sort of web site address.

 

Gene

----- Original Message -----

Sent: Tuesday, January 28, 2020 10:57 AM

Subject: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

 

Hello Brian,

 

I have used both Firefox and Google Chrome for this. At first I thought it was getting cut off as well, since NVDA will restart if you only type nvda into the run dialog, but that doesn’t appear to be the case. If I type nvdaa instead of nvdaa, it doesn’t restart, but goes on to open the browser with the corresponding webpage address. If I enter nvda instead, NVDA just restarts and nothing else happens. It only happens with NVDA, and no other applications that can be launched from the run dialog box.

 

So this is kind of bizarre. I’m not really sure why this would occur at all. I’ve never had trouble actually doing this before.

 

Nicolai

 

Sendt fra Mail til Windows 10

 

Fra: Brian Vogel
Sendt: 28. januar 2020 17:38
Til: nvda@nvda.groups.io
Emne: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

 

Nicolai,

          What web browser is set as your default?   It would be worth testing to see if this might somehow be linked to the browser being used, as odd as that might seem.

           The more you can narrow this down to a specific set of circumstances the better.

           I can imagine NVDA shutting down if the only thing being seen in the run dialog were to be NVDA.  Are you absolutely, positively certain that the entire URL was there?

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Power is being told you're not loved and not being destroyed by it.

       ~ Madonna

 

 

 

 


Re: NVDA restarts when I go to Github page from Run dialog

Nicolai Svendsen
 

Hello Damien,

 

That was sort of what I was thinking as well. That certainly seems to be the most likely reason for this. I wasn’t aware Thunderbird did this too.

 

Thanks for confirming.

 

Nicolai

 

Sendt fra Mail til Windows 10

 

Fra: Damien Garwood
Sendt: 28. januar 2020 19:57
Til: nvda@nvda.groups.io
Emne: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

 

Hi,

In actual fact, I believe this could be a Windows issue, not NVDA. Other

programs such as Thunderbird will also launch if a command contains its

name as part of the string. Maybe it's some kind of aliasing system

which does a search for the strings of programs that use it?

Cheers,

Damien.

 

On 28/01/2020 06:07 pm, Gene wrote:

> In the message I answered, this is stated:

> If I type nvdaa instead of nvdaa, it doesn’t restart, but goes on to

> open the browser with the corresponding webpage address.

> If the full address was stated in an earlier message, I don't recall

> it.  I should also add that my comments about needing to type the full

> path to run the NVDA executable in the run dialog may be wrong.  I use

> NVDA as a portable program.  I don't know what happens if you have it

> installed and use the run dialog.  Whatever the case, the executable is

> being run when just NVDA is being used.

> Gene

> ----- Original Message -----

> *From:* Sarah k Alawami <mailto:marrie12@...>

> *Sent:* Tuesday, January 28, 2020 11:56 AM

> *To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>

> *Subject:* Re: [nvda] NVDA restarts when I go to Github page from Run dialog

>

> No, as clearly stated, he is typing the whole address. Nvda appears to

> restart. Have you tired this with edge, or firefox? I believe you said

> you did this with chrome. Can you try whit with the control l, then

> typing in that address you gave? Also can you screen record this

> behavior so we may take a look at it? You can upload it to keybase or

> something so those of us with sight can look.

>

> Sarah Alawami, owner of TFFP. . For more info go to our website.

> <http://www.tffppodcast.com> This is also our libsyn page as well.

>

> to subscribe to the feed click here <http://feeds.feedburner.com/tffp>

>

> Our telegram <https://t.me/tffppodcast> channel is also a good place for

> an announce only in regard to podcasts, contests, etc.

>

> Our discord <https://discord.gg/dfr7MaVK> is where you will know when we

> go live on [twitch.](twitch.tv/ke7zum] Feel free to give the channel a

> follow and see what is up there.

>

> Finally, to become a patron and help support the podcast go here

> <Http://patreon.com/tffppodcast>

>

> On 28 Jan 2020, at 9:54, Gene wrote:

>

>     We need to be clear about what you are doing.  Are you talking about

>     the run dialog, Windows key being held and r or the start menu

>     search, press the windows key, then type something. None of the

>     behavior you are describing matches the run dialog.  Typing NVDA

>     should produce an error message because you haven't typed the path

>     to the folder containing the executable first.  Typing NVDAA should

>     also present an error message.  Using the start menu may produce the

>     results you are describing if you type something and the first

>     result is something you want and you press enter on it.

>     As I said, you are running the NVDA executable, which I strongly

>     suspect you are running from the start menu search.

>     Gene

>     ----- Original Message -----

>     *From:* Gene via Groups.Io <mailto:gsasner@...>

>     *Sent:* Tuesday, January 28, 2020 11:46 AM

>     *To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>

>     *Subject:* Re: [nvda] NVDA restarts when I go to Github page from

>     Run dialog

>

>     You are running the NVDA exe file again. NVDA is restarting.  NVDAA

>     isn't running the exe file, though I don't seee why the browser

>     would open, that isn't any sort of web site address.

>     Gene

>     ----- Original Message -----

>     *From:* Nicolai Svendsen <mailto:chojiro1990@...>

>     *Sent:* Tuesday, January 28, 2020 10:57 AM

>     *To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>

>     *Subject:* Re: [nvda] NVDA restarts when I go to Github page from

>     Run dialog

>

>     Hello Brian,

>

>     I have used both Firefox and Google Chrome for this. At first I

>     thought it was getting cut off as well, since NVDA will restart if

>     you only type nvda into the run dialog, but that doesn’t appear to

>     be the case. If I type nvdaa instead of nvdaa, it doesn’t restart,

>     but goes on to open the browser with the corresponding webpage

>     address. If I enter nvda instead, NVDA just restarts and nothing

>     else happens. It only happens with NVDA, and no other applications

>     that can be launched from the run dialog box.

>

>     So this is kind of bizarre. I’m not really sure why this would occur

>     at all. I’ve never had trouble actually doing this before.

>

>     Nicolai

>

>     Sendt fra Mail <https://go.microsoft.com/fwlink/?LinkId=550986> til

>     Windows 10

>

>     *Fra: *Brian Vogel <mailto:britechguy@...>

>     *Sendt: *28. januar 2020 17:38

>     *Til: *nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>

>     *Emne: *Re: [nvda] NVDA restarts when I go to Github page from Run

>     dialog

>

>     Nicolai,

>

>              What web browser is set as your default?  It would be worth

>     testing to see if this might somehow be linked to the browser being

>     used, as odd as that might seem.

>

>           The more you can narrow this down to a specific set of

>     circumstances the better.

>

>                 I can imagine NVDA shutting down if the only thing being

>     seen in the run dialog were to be NVDA.  Are you absolutely,

>     positively certain that the entire URL was there?

>

>     --

>

>     Brian *-*Windows 10 Pro, 64-Bit, Version 1909, Build 18363

>

>     *Power is being told you're not loved and not being destroyed by it.*

>

>     ~ Madonna

>

>

 

 

 


Re: NVDA restarts when I go to Github page from Run dialog

Damien Garwood <damien@...>
 

Hi,
In actual fact, I believe this could be a Windows issue, not NVDA. Other programs such as Thunderbird will also launch if a command contains its name as part of the string. Maybe it's some kind of aliasing system which does a search for the strings of programs that use it?
Cheers,
Damien.

On 28/01/2020 06:07 pm, Gene wrote:
In the message I answered, this is stated:
If I type nvdaa instead of nvdaa, it doesn’t restart, but goes on to open the browser with the corresponding webpage address.
If the full address was stated in an earlier message, I don't recall it.  I should also add that my comments about needing to type the full path to run the NVDA executable in the run dialog may be wrong.  I use NVDA as a portable program.  I don't know what happens if you have it installed and use the run dialog.  Whatever the case, the executable is being run when just NVDA is being used.
Gene
----- Original Message -----
*From:* Sarah k Alawami <mailto:marrie12@...>
*Sent:* Tuesday, January 28, 2020 11:56 AM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* Re: [nvda] NVDA restarts when I go to Github page from Run dialog
No, as clearly stated, he is typing the whole address. Nvda appears to restart. Have you tired this with edge, or firefox? I believe you said you did this with chrome. Can you try whit with the control l, then typing in that address you gave? Also can you screen record this behavior so we may take a look at it? You can upload it to keybase or something so those of us with sight can look.
Sarah Alawami, owner of TFFP. . For more info go to our website. <http://www.tffppodcast.com> This is also our libsyn page as well.
to subscribe to the feed click here <http://feeds.feedburner.com/tffp>
Our telegram <https://t.me/tffppodcast> channel is also a good place for an announce only in regard to podcasts, contests, etc.
Our discord <https://discord.gg/dfr7MaVK> is where you will know when we go live on [twitch.](twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.
Finally, to become a patron and help support the podcast go here <Http://patreon.com/tffppodcast>
On 28 Jan 2020, at 9:54, Gene wrote:
We need to be clear about what you are doing.  Are you talking about
the run dialog, Windows key being held and r or the start menu
search, press the windows key, then type something. None of the
behavior you are describing matches the run dialog.  Typing NVDA
should produce an error message because you haven't typed the path
to the folder containing the executable first.  Typing NVDAA should
also present an error message.  Using the start menu may produce the
results you are describing if you type something and the first
result is something you want and you press enter on it.
As I said, you are running the NVDA executable, which I strongly
suspect you are running from the start menu search.
Gene
----- Original Message -----
*From:* Gene via Groups.Io <mailto:gsasner@...>
*Sent:* Tuesday, January 28, 2020 11:46 AM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* Re: [nvda] NVDA restarts when I go to Github page from
Run dialog
You are running the NVDA exe file again. NVDA is restarting.  NVDAA
isn't running the exe file, though I don't seee why the browser
would open, that isn't any sort of web site address.
Gene
----- Original Message -----
*From:* Nicolai Svendsen <mailto:chojiro1990@...>
*Sent:* Tuesday, January 28, 2020 10:57 AM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* Re: [nvda] NVDA restarts when I go to Github page from
Run dialog
Hello Brian,
I have used both Firefox and Google Chrome for this. At first I
thought it was getting cut off as well, since NVDA will restart if
you only type nvda into the run dialog, but that doesn’t appear to
be the case. If I type nvdaa instead of nvdaa, it doesn’t restart,
but goes on to open the browser with the corresponding webpage
address. If I enter nvda instead, NVDA just restarts and nothing
else happens. It only happens with NVDA, and no other applications
that can be launched from the run dialog box.
So this is kind of bizarre. I’m not really sure why this would occur
at all. I’ve never had trouble actually doing this before.
Nicolai
Sendt fra Mail <https://go.microsoft.com/fwlink/?LinkId=550986> til
Windows 10
*Fra: *Brian Vogel <mailto:britechguy@...>
*Sendt: *28. januar 2020 17:38
*Til: *nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Emne: *Re: [nvda] NVDA restarts when I go to Github page from Run
dialog
Nicolai,
        What web browser is set as your default?  It would be worth
testing to see if this might somehow be linked to the browser being
used, as odd as that might seem.
     The more you can narrow this down to a specific set of
circumstances the better.
           I can imagine NVDA shutting down if the only thing being
seen in the run dialog were to be NVDA.  Are you absolutely,
positively certain that the entire URL was there?
--
Brian *-*Windows 10 Pro, 64-Bit, Version 1909, Build 18363
*Power is being told you're not loved and not being destroyed by it.*
~ Madonna


Re: NVDA restarts when I go to Github page from Run dialog

Nicolai Svendsen
 

Hi,

 

Just to summarize, so everyone is on point:

 

As I originally stated, both in the subject line and original post, entering www.github.com/nvaccess/nvda into the run dialog box, certainly using Win+R, causes NVDA to restart as if I had just entered nvdaa instead. It ignores everything else except nvdaa. This is the only application where this happens. Appending a second a after nvdaa causes the default browser to launch, showing the URL as www.github.com/nvaccess/nvdaa. So, the only case where it ignores the entire address is when nvdaa is entered following the / (slash), but anything else appended to nvdaa causes the entire entry to be recognized properly, with the URL obviously being incorrect then.

 

It doesn’t matter which browser is the default one. Just for the sake of humor, I did this using Microsoft edge Beta, Microsoft Edge, Google Crome, Mozilla Firefox and even Internet Explorer as default browsers. Nothing visually happens on screen. You’re just bounced back to the desktop, the dialog closes, and NVDA restarts. It also does not matter whether NVDA is already running or not when doing this. It turns out that NVDA launches regardless, even if you exit the application, right click the start button, click “Run”, then enter in www.github.com/nvaccess/nvda.

 

Also, it doesn’t have to be that particular addressor any address at all. As long as it ends with /nvdaa, it does this. Apparently, even if it is thisissuperweird/nvdaa or stopdoingthis/nvda.

 

Maybe that last one is a clue to somebody. If it isn’t, I’ll probably figure it out tomorrow when I get back to work and have multiple configurations to test and modify that isn’t my own. I reiterate that this only happens with NVDA, and no other application so far. Windows rightly doesn’t recognize thisissuperweird followed by anything else after a  (slash), except if it is nvdaa, no matter what it is I enter before it.

 

I don’t think I can make that any clearer or long-winded.

 

Nicolai

 

 

 

Sendt fra Mail til Windows 10

 

Fra: Sarah k Alawami
Sendt: 28. januar 2020 18:56
Til: nvda@nvda.groups.io
Emne: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

 

No, as clearly stated, he is typing the whole address. Nvda appears to restart. Have you tired this with edge, or firefox? I believe you said you did this with chrome. Can you try whit with the control l, then typing in that address you gave? Also can you screen record this behavior so we may take a look at it? You can upload it to keybase or something so those of us with sight can look.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on [twitch.](twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

Finally, to become a patron and help support the podcast go here

On 28 Jan 2020, at 9:54, Gene wrote:

We need to be clear about what you are doing.  Are you talking about the run dialog, Windows key being held and r or the start menu search, press the windows key, then type something.  None of the behavior you are describing matches the run dialog.  Typing NVDA should produce an error message because you haven't typed the path to the folder containing the executable first.  Typing NVDAA should also present an error message.  Using the start menu may produce the results you are describing if you type something and the first result is something you want and you press enter on it. 

 

As I said, you are running the NVDA executable, which I strongly suspect you are running from the start menu search.

 

Gene

----- Original Message -----

Sent: Tuesday, January 28, 2020 11:46 AM

Subject: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

 

You are running the NVDA exe file again.  NVDA is restarting.  NVDAA isn't running the exe file, though I don't seee why the browser would open, that isn't any sort of web site address.

 

Gene

----- Original Message -----

Sent: Tuesday, January 28, 2020 10:57 AM

Subject: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

 

Hello Brian,

 

I have used both Firefox and Google Chrome for this. At first I thought it was getting cut off as well, since NVDA will restart if you only type nvda into the run dialog, but that doesn’t appear to be the case. If I type nvdaa instead of nvdaa, it doesn’t restart, but goes on to open the browser with the corresponding webpage address. If I enter nvda instead, NVDA just restarts and nothing else happens. It only happens with NVDA, and no other applications that can be launched from the run dialog box.

 

So this is kind of bizarre. I’m not really sure why this would occur at all. I’ve never had trouble actually doing this before.

 

Nicolai

 

Sendt fra Mail til Windows 10

 

Fra: Brian Vogel
Sendt: 28. januar 2020 17:38
Til: nvda@nvda.groups.io
Emne: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

 

Nicolai,

          What web browser is set as your default?   It would be worth testing to see if this might somehow be linked to the browser being used, as odd as that might seem.

           The more you can narrow this down to a specific set of circumstances the better.

           I can imagine NVDA shutting down if the only thing being seen in the run dialog were to be NVDA.  Are you absolutely, positively certain that the entire URL was there?

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Power is being told you're not loved and not being destroyed by it.

       ~ Madonna

 

 

 

 


Re: NVDA restarts when I go to Github page from Run dialog

Gene
 

In the message I answered, this is stated:
If I type nvdaa instead of nvdaa, it doesn’t restart, but goes on to open the browser with the corresponding webpage address. 
 
If the full address was stated in an earlier message, I don't recall it.  I should also add that my comments about needing to type the full path to run the NVDA executable in the run dialog may be wrong.  I use NVDA as a portable program.  I don't know what happens if you have it installed and use the run dialog.  Whatever the case, the executable is being run when just NVDA is being used.
 
Gene

----- Original Message -----
Sent: Tuesday, January 28, 2020 11:56 AM
Subject: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

No, as clearly stated, he is typing the whole address. Nvda appears to restart. Have you tired this with edge, or firefox? I believe you said you did this with chrome. Can you try whit with the control l, then typing in that address you gave? Also can you screen record this behavior so we may take a look at it? You can upload it to keybase or something so those of us with sight can look.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on [twitch.](twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

Finally, to become a patron and help support the podcast go here

On 28 Jan 2020, at 9:54, Gene wrote:

We need to be clear about what you are doing.  Are you talking about the run dialog, Windows key being held and r or the start menu search, press the windows key, then type something.  None of the behavior you are describing matches the run dialog.  Typing NVDA should produce an error message because you haven't typed the path to the folder containing the executable first.  Typing NVDAA should also present an error message.  Using the start menu may produce the results you are describing if you type something and the first result is something you want and you press enter on it. 
 
As I said, you are running the NVDA executable, which I strongly suspect you are running from the start menu search.
 
Gene
----- Original Message -----
Sent: Tuesday, January 28, 2020 11:46 AM
Subject: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

You are running the NVDA exe file again.  NVDA is restarting.  NVDAA isn't running the exe file, though I don't seee why the browser would open, that isn't any sort of web site address.
 
Gene
----- Original Message -----
Sent: Tuesday, January 28, 2020 10:57 AM
Subject: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

Hello Brian,

 

I have used both Firefox and Google Chrome for this. At first I thought it was getting cut off as well, since NVDA will restart if you only type nvda into the run dialog, but that doesn’t appear to be the case. If I type nvdaa instead of nvdaa, it doesn’t restart, but goes on to open the browser with the corresponding webpage address. If I enter nvda instead, NVDA just restarts and nothing else happens. It only happens with NVDA, and no other applications that can be launched from the run dialog box.

 

So this is kind of bizarre. I’m not really sure why this would occur at all. I’ve never had trouble actually doing this before.

 

Nicolai

 

Sendt fra Mail til Windows 10

 

Fra: Brian Vogel
Sendt: 28. januar 2020 17:38
Til: nvda@nvda.groups.io
Emne: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

 

Nicolai,

          What web browser is set as your default?   It would be worth testing to see if this might somehow be linked to the browser being used, as odd as that might seem.

           The more you can narrow this down to a specific set of circumstances the better.

           I can imagine NVDA shutting down if the only thing being seen in the run dialog were to be NVDA.  Are you absolutely, positively certain that the entire URL was there?

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Power is being told you're not loved and not being destroyed by it.

       ~ Madonna

 

 

 


Re: NVDA restarts when I go to Github page from Run dialog

Sarah k Alawami
 

No, as clearly stated, he is typing the whole address. Nvda appears to restart. Have you tired this with edge, or firefox? I believe you said you did this with chrome. Can you try whit with the control l, then typing in that address you gave? Also can you screen record this behavior so we may take a look at it? You can upload it to keybase or something so those of us with sight can look.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on [twitch.](twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

Finally, to become a patron and help support the podcast go here

On 28 Jan 2020, at 9:54, Gene wrote:

We need to be clear about what you are doing.  Are you talking about the run dialog, Windows key being held and r or the start menu search, press the windows key, then type something.  None of the behavior you are describing matches the run dialog.  Typing NVDA should produce an error message because you haven't typed the path to the folder containing the executable first.  Typing NVDAA should also present an error message.  Using the start menu may produce the results you are describing if you type something and the first result is something you want and you press enter on it. 
 
As I said, you are running the NVDA executable, which I strongly suspect you are running from the start menu search.
 
Gene
----- Original Message -----
Sent: Tuesday, January 28, 2020 11:46 AM
Subject: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

You are running the NVDA exe file again.  NVDA is restarting.  NVDAA isn't running the exe file, though I don't seee why the browser would open, that isn't any sort of web site address.
 
Gene
----- Original Message -----
Sent: Tuesday, January 28, 2020 10:57 AM
Subject: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

Hello Brian,

 

I have used both Firefox and Google Chrome for this. At first I thought it was getting cut off as well, since NVDA will restart if you only type nvda into the run dialog, but that doesn’t appear to be the case. If I type nvdaa instead of nvdaa, it doesn’t restart, but goes on to open the browser with the corresponding webpage address. If I enter nvda instead, NVDA just restarts and nothing else happens. It only happens with NVDA, and no other applications that can be launched from the run dialog box.

 

So this is kind of bizarre. I’m not really sure why this would occur at all. I’ve never had trouble actually doing this before.

 

Nicolai

 

Sendt fra Mail til Windows 10

 

Fra: Brian Vogel
Sendt: 28. januar 2020 17:38
Til: nvda@nvda.groups.io
Emne: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

 

Nicolai,

          What web browser is set as your default?   It would be worth testing to see if this might somehow be linked to the browser being used, as odd as that might seem.

           The more you can narrow this down to a specific set of circumstances the better.

           I can imagine NVDA shutting down if the only thing being seen in the run dialog were to be NVDA.  Are you absolutely, positively certain that the entire URL was there?

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Power is being told you're not loved and not being destroyed by it.

       ~ Madonna

 

 

 


Re: NVDA restarts when I go to Github page from Run dialog

Gene
 

But how would it know that NVDAA is a web attress?  There is no prefix.  Maybe in the start menu, it might find it from history, but I don't know if the start menu can do that. 
 
Gene

----- Original Message -----
Gene
----- Original Message -----
Sent: Tuesday, January 28, 2020 11:50 AM
Subject: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

On Tue, Jan 28, 2020 at 12:45 PM, Gene wrote:
that isn't any sort of web site address.
Incorrect, Gene.  It is the very webpage for NVDA  under Github, and if you activate the link in Nicolai's original message you would go there.

One would typically be able to paste a URL such as this one in the Run dialog box and have it open in one's default web browser, with some exceptions for privacy-oriented ones that don't accept the invocation via that mechanism.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Power is being told you're not loved and not being destroyed by it.

       ~ Madonna

 

 


Re: NVDA restarts when I go to Github page from Run dialog

Gene
 

We need to be clear about what you are doing.  Are you talking about the run dialog, Windows key being held and r or the start menu search, press the windows key, then type something.  None of the behavior you are describing matches the run dialog.  Typing NVDA should produce an error message because you haven't typed the path to the folder containing the executable first.  Typing NVDAA should also present an error message.  Using the start menu may produce the results you are describing if you type something and the first result is something you want and you press enter on it. 
 
As I said, you are running the NVDA executable, which I strongly suspect you are running from the start menu search.
 
Gene

----- Original Message -----
Sent: Tuesday, January 28, 2020 11:46 AM
Subject: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

You are running the NVDA exe file again.  NVDA is restarting.  NVDAA isn't running the exe file, though I don't seee why the browser would open, that isn't any sort of web site address.
 
Gene
----- Original Message -----
Sent: Tuesday, January 28, 2020 10:57 AM
Subject: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

Hello Brian,

 

I have used both Firefox and Google Chrome for this. At first I thought it was getting cut off as well, since NVDA will restart if you only type nvda into the run dialog, but that doesn’t appear to be the case. If I type nvdaa instead of nvdaa, it doesn’t restart, but goes on to open the browser with the corresponding webpage address. If I enter nvda instead, NVDA just restarts and nothing else happens. It only happens with NVDA, and no other applications that can be launched from the run dialog box.

 

So this is kind of bizarre. I’m not really sure why this would occur at all. I’ve never had trouble actually doing this before.

 

Nicolai

 

Sendt fra Mail til Windows 10

 

Fra: Brian Vogel
Sendt: 28. januar 2020 17:38
Til: nvda@nvda.groups.io
Emne: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

 

Nicolai,

          What web browser is set as your default?   It would be worth testing to see if this might somehow be linked to the browser being used, as odd as that might seem.

           The more you can narrow this down to a specific set of circumstances the better.

           I can imagine NVDA shutting down if the only thing being seen in the run dialog were to be NVDA.  Are you absolutely, positively certain that the entire URL was there?

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Power is being told you're not loved and not being destroyed by it.

       ~ Madonna

 

 

 


Re: NVDA restarts when I go to Github page from Run dialog

 

On Tue, Jan 28, 2020 at 12:45 PM, Gene wrote:
that isn't any sort of web site address.
Incorrect, Gene.  It is the very webpage for NVDA  under Github, and if you activate the link in Nicolai's original message you would go there.

One would typically be able to paste a URL such as this one in the Run dialog box and have it open in one's default web browser, with some exceptions for privacy-oriented ones that don't accept the invocation via that mechanism.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Power is being told you're not loved and not being destroyed by it.

       ~ Madonna

 

 


Re: I'm having problems when i use nvda together with nativeaccess.

Sarah k Alawami
 

You might want to talk with the folks at the reapers list on groups.io as we discuss these things and much much more.

Take care

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on [twitch.](twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

Finally, to become a patron and help support the podcast go here

On 27 Jan 2020, at 23:29, David Ingram wrote:

P.S. I also want to upgrade from komplete start to komplete 12 but i'm not sure how this is do done. I can't find anyinformation about this in the support documentation from native-instruments. What should i do?

-----Original Message-----
From: Gene
Sent: Jan 28, 2020 1:18 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] I'm having problems when i use nvda together with nativeaccess.

You are bottom posting.  When you bottom post, many people may believe you sent a message with no new content or they may simply not bother finding your message below all the others. 
 
Gene
----- Original Message -----
Sent: Tuesday, January 28, 2020 1:03 AM
Subject: Re: [nvda] I'm having problems when i use nvda together with nativeaccess.




-----Original Message-----
>From: Jaffar Sidek <jaffar.sidek10@...>
>Sent: Jan 27, 2020 9:28 PM
>To: nvda@nvda.groups.io
>Subject: Re: [nvda] I'm having problems when i use nvda together with nativeaccess.
>
>Hi David.  I have Native Access Currenly opened as I write this email. 
>Assuming you are on a Desktop setup, Use NVDA or Numpad Insert+Numpad6
>to navigate forward or Numpad Insert+Numpad4 to navigate backwards to
>get to the object you want.  Press Numpad Insert+ numpad8 to open up the
>object you desire to see the elements within that object.  All buttons
>can then be manipulated using Numpad insert+Numpad Enter.  Texts can be
>accessed with Numpad Insert+ Numpad 1 or 3, and characters wit Numpad 1
>or 3 without the Insert key.  For those who want to be in the know,
>native Access is a solution to install plugins and applications from
>Native instruments which deals with computer Music software and the
>rather accessible Komplete Kontrl Midi Controller. Cheers!
>
>On 1/27/2020 8:21 PM, David Ingram wrote:
>>
>>
>> -----Original Message-----
>>> From: zahra <nasrinkhaksar3@...>
>>> Sent: Jan 27, 2020 4:01 AM
>>> To: nvda@nvda.groups.io
>>> Subject: Re: [nvda] I'm having problems when i use nvda together with nativeaccess.
>>>
>>> hi.
>>> i did not heard of this program until now.
>>> is it accessible with screen readers?
>>> if it be accessible, nvda and any other screen reader should support it.
>>>
>>> On 1/27/20, David Ingram <dingram269@...> wrote:
>>>> The problems that i'm having when using nvda together with nativeaccess are
>>>> the following: 1.  I'm unable to get any response when I use the keystroke
>>>> b.  Second, when I use the tab key nothing happens.  Third when I use the
>>>> insert+r command inorder to do a scan I don't get anything after the scan
>>>> command.  I'm using the latest version of windows 10 The newer version of
>>>> nvda has not been released yet.  Not to mention, that i'm unable to find the
>>>> update all button when using nvda together with nativeaccess.  I've also
>>>> tried to activate the different buttons using the insert+2 on the numpad but
>>>> nothing happens.  Also I thaught that if I use insert+enter on the numpad
>>>> that would activate the buttons but nothing happens.  Is there something
>>>> else that I could be missing in terms of these commands.  I can be reached
>>>> at dingram269@....  I've also downloaded the remote access tool
>>>> for nvda just in case someone wanted to remote into my computer to take a
>>>> look at how nvda works together with nativeaccess.  I'm trying to see if
>>>> nvaccess.org would be able to assist in helping to correctany problems that
>>>> i'm having when I use nvda together with nativeaccess.  Thank you for any
>>>> information that you might have as to how I can solve these problems.
>>>>
>>>>
>>>>
>>>>
>>>
>>> --
>>> By God,
>>> were I given all the seven heavens
>>> with all they contain
>>> in order that
>>> I may disobey God
>>> by depriving an ant
>> >from the husk of a grain of barley,
>>> I would not do it.
>>> imam ali
>>>
>>>
>>>
>> Hi, how are you?  If you play keyboards and are interested in recording your own music You can use nvda together with a program called reaper.  I'm part of a growing listrwp which stands for reapers without peepers.  Also you can go to native-instruments.com create an account then you'll be able to download nativeaccess.  This program nativeaccess allows you the ability to download free as well as paid instruments that you can use with reaper in order to create music.  I hope that this helps.
>>
>>
>>
>
>
>
Hi, Jaffar, how are you? thank you for one thing that you clarified.  I'd like to ask if you have the nvda remote tool as well?  The reason why I ask is because I want to confirm some of the problems that I've been having as it relates to using nvda together with nativeaccess.  I'm not sure whether I did something right when it comes to using the scan command by using insert+r but the thing is after doing that command I don't hear any results.  P.S.  I also wanted to see if Nvaccess.org would not only support nvda used together with nativeaccess but I'd like for them to help correct any information and properly document the keystrokes used when using nvda together with nativeaccess.  I want to thank you.  P.S. there was also a problem when I tried to see if update all was visible but i'm not sure whether you found that button or did you?



Re: NVDA restarts when I go to Github page from Run dialog

Gene
 

You are running the NVDA exe file again.  NVDA is restarting.  NVDAA isn't running the exe file, though I don't seee why the browser would open, that isn't any sort of web site address.
 
Gene

----- Original Message -----
Sent: Tuesday, January 28, 2020 10:57 AM
Subject: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

Hello Brian,

 

I have used both Firefox and Google Chrome for this. At first I thought it was getting cut off as well, since NVDA will restart if you only type nvda into the run dialog, but that doesn’t appear to be the case. If I type nvdaa instead of nvdaa, it doesn’t restart, but goes on to open the browser with the corresponding webpage address. If I enter nvda instead, NVDA just restarts and nothing else happens. It only happens with NVDA, and no other applications that can be launched from the run dialog box.

 

So this is kind of bizarre. I’m not really sure why this would occur at all. I’ve never had trouble actually doing this before.

 

Nicolai

 

Sendt fra Mail til Windows 10

 

Fra: Brian Vogel
Sendt: 28. januar 2020 17:38
Til: nvda@nvda.groups.io
Emne: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

 

Nicolai,

          What web browser is set as your default?   It would be worth testing to see if this might somehow be linked to the browser being used, as odd as that might seem.

           The more you can narrow this down to a specific set of circumstances the better.

           I can imagine NVDA shutting down if the only thing being seen in the run dialog were to be NVDA.  Are you absolutely, positively certain that the entire URL was there?

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Power is being told you're not loved and not being destroyed by it.

       ~ Madonna

 

 

 


Re: NVDA restarts when I go to Github page from Run dialog

Nicolai Svendsen
 

Hello Brian,

 

I have used both Firefox and Google Chrome for this. At first I thought it was getting cut off as well, since NVDA will restart if you only type nvda into the run dialog, but that doesn’t appear to be the case. If I type nvdaa instead of nvdaa, it doesn’t restart, but goes on to open the browser with the corresponding webpage address. If I enter nvda instead, NVDA just restarts and nothing else happens. It only happens with NVDA, and no other applications that can be launched from the run dialog box.

 

So this is kind of bizarre. I’m not really sure why this would occur at all. I’ve never had trouble actually doing this before.

 

Nicolai

 

Sendt fra Mail til Windows 10

 

Fra: Brian Vogel
Sendt: 28. januar 2020 17:38
Til: nvda@nvda.groups.io
Emne: Re: [nvda] NVDA restarts when I go to Github page from Run dialog

 

Nicolai,

          What web browser is set as your default?   It would be worth testing to see if this might somehow be linked to the browser being used, as odd as that might seem.

           The more you can narrow this down to a specific set of circumstances the better.

           I can imagine NVDA shutting down if the only thing being seen in the run dialog were to be NVDA.  Are you absolutely, positively certain that the entire URL was there?

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Power is being told you're not loved and not being destroyed by it.

       ~ Madonna

 

 

 


locked Re: NVDA and the Online Bible.

 

Topic now locked.

I really am done in being diplomatic about getting people to give due consideration to the group rules.  If you have a non-NVDA-centric question it should be asked privately, on the chat subgroup, or elsewhere - NOT here.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Power is being told you're not loved and not being destroyed by it.

       ~ Madonna

 

 


locked Re: NVDA and the Online Bible.

Gary Metzler
 

Hi Karen,

 

Thanks for the link.  Do you know where to get other bible translations such as the niv?  Thanks for any help.

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Kerryn Gunness via Groups.Io
Sent: Monday, January 27, 2020 2:48 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and the Online Bible.

 

the below works well with nvda

 

 

 

----- Original Message -----

Sent: Monday, January 27, 2020 12:37 PM

Subject: [nvda] NVDA and the Online Bible.

 

Hey Folks:

 

Has anyone been able to get NVDA working with the Online Bible program?

 

Thanks all over the place gang.

 


Re: NVDA restarts when I go to Github page from Run dialog

 

Nicolai,

          What web browser is set as your default?   It would be worth testing to see if this might somehow be linked to the browser being used, as odd as that might seem.

           The more you can narrow this down to a specific set of circumstances the better.

           I can imagine NVDA shutting down if the only thing being seen in the run dialog were to be NVDA.  Are you absolutely, positively certain that the entire URL was there?

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Power is being told you're not loved and not being destroyed by it.

       ~ Madonna

 

 


locked Re: NVDA and the Online Bible.

 

On Tue, Jan 28, 2020 at 06:36 AM, Mallard wrote:
Can I post my findings privately, if the thread isn't appropriate for this list?
Of course you could, or you could use the Chat Subgroup.

That being said, if the findings are about whether something is accessible or inaccessible using NVDA, or about the actual NVDA commands needed to access something in a given program or website (or whatever) then they're appropriate to the main group.

But if the discussion turns to all of the various commands related to a specific program, and not NVDA, then it's not.  The welcome message to new subscribers, and the monthly reminder message, explicitly states:  Before choosing where to post, please ask yourself the question, “Is what I’m about to ask directly related to controlling or using NVDA, or whether a specific program is accessible with NVDA?”  If that can be answered, “Yes,” then post to the NVDA Group, and if the answer is, “No,” then the topic belongs in the NVDA Chat Subgroup.

There is always leeway given for the intermingling of NVDA commands and program commands during a discussion, but I think it becomes very clear to most screen reader users, and very quickly, when it's the commands not for the screen reader, but a specific program, that are being discussed.   And it is important that any screen reader user be able to differentiate between operating system (generally Windows) commands, screen reader commands, and program commands.  Knowing what you're trying to control is often the very first step in deciding where to focus and for the ultimate solution to a problem.  It also helps you decide what venues are most appropriate for seeking the guidance you need, as questions tend to get the most traction where they're on-topic for the venue(s).

If someone says, "That might be better asked {insert suggested group, mailing list, etc. here}", they're trying to help you find your solution most quickly by directing you to subject matter experts on whatever "that" might be.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Power is being told you're not loved and not being destroyed by it.

       ~ Madonna

 

 


locked Re: NVDA and the Online Bible.

Jim Noseworthy
 

Hello:

Yes, it does work with JAWS.

Thanks.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of john s
Sent: Tuesday, January 28, 2020 6:03 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and the Online Bible.

Jim, does the OLB work well with any screen reader? Sadly, newer versions
aren't as accessable.

At 05:46 PM 1/27/2020, Jim Noseworthy, wrote:
Hello:

The program is actually called "The Online Bible."

http://www.onlinebible.net


-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Damien
Garwood
Sent: Monday, January 27, 2020 1:05 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and the Online Bible.

Hi Jim,
I'd need to know which online Bible you're using (Biblica, Bible
Gateway etc). Also, by program, do you mean the website itself, or a
separate program you actually downloaded and installed?
Cheers,
Damien.

On 27/01/2020 04:37 pm, Jim Noseworthy wrote:
Hey Folks:

Has anyone been able to get NVDA working with the Online Bible program?

Thanks all over the place gang.





John


locked Re: NVDA and the Online Bible.

Jim Noseworthy
 

Hey Ollie:

Yes indeed: send your findings to:
Jim.noseworthy@...

Thanks all over the place.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Mallard
Sent: Tuesday, January 28, 2020 7:36 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA and the Online Bible.

Hello,


I've just seen this message. I'll be happy to test and let ou know if I have any NVDA-specific issues.


Can I post my findings privately, if the thread isn't appropriate for
this list?


Thanks, blessings,

Ollie




On 28/01/2020 00:07, Jim Noseworthy wrote:

Hello:

Thanks for your post.

Actually, my request is strictly NVDA related. I am the JAWS support
person for the Online Bible which works quite well but more & more
folks are turning to NVDA for various reasons. So, if a seasoned NVDA
user can confirm that NVDA does, or does not, work with the Online
Bible, I would greatly appreciate it.

Since both NVDA and the Online Bible are free, it could be a perfect
match if it worked since the Online Bible is very extensive in it’s
capabilities.

*Thanks all over the place.*

**

**

*From:*nvda@nvda.groups.io <nvda@nvda.groups.io> *On Behalf Of *Brian
Vogel
*Sent:* Monday, January 27, 2020 6:55 PM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] NVDA and the Online Bible.

For those who wish to download the program to which Mr. Noseworthy
refers, here's the direct download link:
http://onlinebible.net/files/install_advance_5.50.00.00.exe

If any commentary not related to NVDA is needed, and it would probably
be extensive if the program is either completely inaccessible or
completely accessible, either of which can be reported here, or that
one needs to use something like object navigation to access it, should
occur on the Chat Subgroup.

--

Brian *-*Windows 10 Pro, 64-Bit, Version 1909, Build 18363

*Power is being told you're not loved and not being destroyed by it.*

~ Madonna


NVDA restarts when I go to Github page from Run dialog

Nicolai Svendsen
 

Hello,

 

I just saw something really weird today.

 

Basically, I went to the “Run” dialog, entered www.github.com/nvaccess/nvda and pressed enter. NVDA promptly rebooted. If I omit nvda, it’s fine.

 

Why would that happen? Running NVDA 2019.3. Old log just seems to show that everything terminated.

 

Nicolai

 

Sendt fra Mail til Windows 10