1. nvda@nvda.groups.io
  2. Messages
   Date   
Re: can't read the what's new from the help menu

Bobby Vinton <vinton.bobby5277@...>
 

Got it to work.  I just ad to tell nvda what browser to use to open the page.  Thank you all very much.  Now every thing is working again.

On 2/3/2020 3:50 PM, ben wrote:
It works fine here.


The page opens right up in Firefox.


Ben

On 2/3/2020 2:14 PM, hurrikennyandopo ... wrote:
Hi


Is it associated with the browser or a browser.


What may happen is when you go into the whats new section you might have to tell it what browser to use and check the box so it does it from then on.


Gene nz


On 4/02/2020 7:31 am, Bobby Vinton wrote:
Hay I am running nvda 2019 rc 2 and when I try to read the what's new with the help menu nvda will just go back to the desk top and not read the what's new at all.  I was wondering when you will have this bug fixed or did any one know about the issue?
Re: can't read the what's new from the help menu

ben <swigjr23@...>
 

It works fine here.


The page opens right up in Firefox.


Ben

On 2/3/2020 2:14 PM, hurrikennyandopo ... wrote:
Hi


Is it associated with the browser or a browser.


What may happen is when you go into the whats new section you might have to tell it what browser to use and check the box so it does it from then on.


Gene nz


On 4/02/2020 7:31 am, Bobby Vinton wrote:
Hay I am running nvda 2019 rc 2 and when I try to read the what's new with the help menu nvda will just go back to the desk top and not read the what's new at all.  I was wondering when you will have this bug fixed or did any one know about the issue?
Re: can't read the what's new from the help menu

hurrikennyandopo ...
 

Hi


Is it associated with the browser or a browser.


What may happen is when you go into the whats new section you might have to tell it what browser to use and check the box so it does it from then on.


Gene nz

On 4/02/2020 7:31 am, Bobby Vinton wrote:
Hay I am running nvda 2019 rc 2 and when I try to read the what's new with the help menu nvda will just go back to the desk top and not read the what's new at all.  I was wondering when you will have this bug fixed or did any one know about the issue?
Re: can't read the what's new from the help menu

Bobby Vinton <vinton.bobby5277@...>
 

Sorry I ment nvda 2019.3 rc 2.  I left a fiew words out.

On 2/3/2020 1:31 PM, Bobby Vinton via Groups.Io wrote:
Hay I am running nvda 2019 rc 2 and when I try to read the what's new with the help menu nvda will just go back to the desk top and not read the what's new at all.  I was wondering when you will have this bug fixed or did any one know about the issue?
can't read the what's new from the help menu

Bobby Vinton <vinton.bobby5277@...>
 

Hay I am running nvda 2019 rc 2 and when I try to read the what's new with the help menu nvda will just go back to the desk top and not read the what's new at all.  I was wondering when you will have this bug fixed or did any one know about the issue?
Joseph Lee's add-ons and NVDA 2019.3: release schedule for next add-on releases in preparation for 2019.3 stable

Joseph Lee
 

Hi all,

 

NVDA 2019.3 RC (release candidate) was declared, one of the final betas that will be identical to upcoming NVDA 2019.3 stable release unless critical issues emerge. Therefore I hereby announce the schedule for add-on releases from me that are NVDA 2019.3 compatible (or requires NVDA 2019.3):

 

  • Add-on Updater: version 20.02 will hit the air tomorrow. This is a mandatory update for all Add-on Updater users. Feature set is identical to latest version with localization updates and makes provision to support future NVDA releases. Also, 20.02.x will be the last version to support NVDA 2019.2.1 – a March release will require support for 2019.3 and later.
  • StationPlaylist and Windows 10 App Essentials: 20.02 release for these add-ons will be made available within 48 hours after 2019.3 stable is released. These add-ons require NVDA 2019.3 to install and function, and starting from 20.02, Windows 10 App Essentials will also require Windows 10 Version 1903 (May 2019 Update/build 18362).

 

As for other add-ons such as Resource Monitor, no 20.02 releases for them at the moment; note that all of them require NVDA 2019.3.

 

Special notice for DictationBridge users: version 1.1, compatible with NVDA 2019.3, will be released by end of this week.

 

Related to this: if you visit community add-ons website and select any of my add-ons, you’ll see a link to download an older release supporting NVDA 2019.2.1 or earlier. These links will be removed 30 days after NVDA 2019.3 stable version is released.

 

Cheers,

Joseph
Re: NVDA 2019.3 and add-ons: status as of 2019.3 beta 4

Richard Wells
 

Joseph and All: Users of the Acapela synthesizer voices will be thrilled to know that they are compatible with NVDA 2019.3. http://www.acapela-nvda.com/get-your-download-here-v1-6/

On 2/2/2020 11:41 PM, Joseph Lee wrote:

Hello NVDA users,

 

What a week it was – two NVDA 2019.3 betas in a span of few days. And you know what this means: another update on add-ons and 2019.3 readiness.

 

The biggest news is that NVDA Remote add-on is one step closer to 2019.3 compatibility. A few days ago, NV Access people sent necessary changes to make the add-on compatible with NVDA 2019.3 to add-on writers, which was subsequently accepted. Although work remains to be done, the add-on is getting ready for 2019.3 users.

 

Also, once NVDA 2019.3 release candidate (RC) is released, expect numerous important announcements from add-ons community on status of various add-ons. These will include another compatibility briefing, along with add-on authors announcing release of NVDA 2019.3 compatible versions of their add-ons or a schedule as to when these versions will appear on stable channel (I myself will announce such information within 24 hours after RC is released). Once 2019.3 RC is released, it will become crucial for users of incompatible add-ons to contact authors about the status of their add-ons, especially add-ons listed as incompatible on community add-ons website (under Announcements, Python 3 announcement page).

 

Thank you.

Cheers,

Joseph
NVDA 2019.3 and add-ons: status as of 2019.3 beta 4

Joseph Lee
 

Hello NVDA users,

 

What a week it was – two NVDA 2019.3 betas in a span of few days. And you know what this means: another update on add-ons and 2019.3 readiness.

 

The biggest news is that NVDA Remote add-on is one step closer to 2019.3 compatibility. A few days ago, NV Access people sent necessary changes to make the add-on compatible with NVDA 2019.3 to add-on writers, which was subsequently accepted. Although work remains to be done, the add-on is getting ready for 2019.3 users.

 

Also, once NVDA 2019.3 release candidate (RC) is released, expect numerous important announcements from add-ons community on status of various add-ons. These will include another compatibility briefing, along with add-on authors announcing release of NVDA 2019.3 compatible versions of their add-ons or a schedule as to when these versions will appear on stable channel (I myself will announce such information within 24 hours after RC is released). Once 2019.3 RC is released, it will become crucial for users of incompatible add-ons to contact authors about the status of their add-ons, especially add-ons listed as incompatible on community add-ons website (under Announcements, Python 3 announcement page).

 

Thank you.

Cheers,

Joseph
Re: NVDA 2019.3 Beta 3 now available

hurrikennyandopo ...
 

Hi Quentin


Confirmed when downloading the remote 2.2 add on there is no message now from the Microsoft antivirus so have upated to latest one for 2019.2.1


I disabled the add on updater it gave me a message like there were files missing or it was not compatibleI would have to check.


Thanks for alerting them or what ever you done so it was not pulled up as a trojen.

Gene nz


On 3/02/2020 2:43 pm, Quentin Christensen wrote:
Re the NVDARemote addon being detected as a trojan - this issue was rectified by Microsoft last week (or earlier, but at least last week, a day or so after it was reported anyway) - it should be fine now.  I just downloaded it and it's not being detected as a trojan here.  If anyone is still having that problem, please do let me know.

Re the question about couldn't we make a version of NVDA with Remote built-in and one without.  Theoretically, sure, although essentially that would be similar to now where you can download NVDA (as is) to have the version without Remote, and download the NVDARemote add-on to have the functionality. I'm not saying we're not willing to change it, just that essentially users have the choice currently of whether they want the functionality.

On Fri, Jan 31, 2020 at 5:49 AM Shaun Everiss <sm.everiss@...> wrote:

What you can do right now is turn off windows defender, unzip the addon into a empty folder, select all the files in that folder, and zip it back up then rename the file to nvda-addon.

Make sure you zip up the files and not make a new folder and zip that up because it won't work then.

Anyway after you do that, it works.

Its a bit more to do but it seems to fix it.

The only thing that makes sence is its the zipping program used, but who knows.

I have always used 7zip for zip and unzip opperations and use the 7z format for most things these days as do my friends.



On 31/01/2020 1:11 am, Robert Doc Wright godfearer wrote:

Should I then ignore the warning that Windows Defender is giving when it blocks the latest NVDA remote, claiming that there is a severe trojen?

 

******

My drinking team has a bowling problem.

Check out Family times on TuneIn or at this address:

http://www.wrighthere.net                                               

 

From: Rui Fontes
Sent: Thursday, January 30, 2020 5:02 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA 2019.3 Beta 3 now available

 

And it is not possible to make what Freedom Scientific have made?

One version with remote access and another without?

That way the companies and institutions can install the version without remote access while the majority of users will install the complete version with the remote access...

 

Rui Fontes

 

Às 04:29 de 30/01/2020, Robert Mendoza escreveu:

Hi, Quentin

This is noted. I appreciate of your diligent response
but before I letting off you go for this topic. I still have one more question from you. Smile.
Since we are close to stable phase of the nvda 2019.3
would there be a chance that the addons for the Remote will be release at the same time?

On 1/30/2020 11:36 AM, Quentin Christensen wrote:

Hi Robert,

 

Thanks for the question.  Firstly, for everyone, We've pushed out a couple of pull requests to update NVDARemote for 2019.3, so that will be available for the stable version.

 

As to including NVDA Remote into NVDA itself, even though many users use it frequently and it is vital for some users, it is not something we are looking at bringing into core at this point, One reason for this is we have a number of users in corporate environments and we would get a lot of pushback from them (or their IT people at least) on updating NVDA to a version with that functionality.

 

The main thing is that the functionality will continue to be available going forward, even though at this point that will still involve the separate add-on.

 

Regards

 

Quentin.

 

On Thu, Jan 30, 2020 at 1:59 PM Robert Mendoza <lowvisiontek@...> wrote:

Hi, Quentin

Thanks for the info however, I have clarification to ask if you don't mind.
Even so, if we are almost in the stable build version would there be a chance that the addons of the Remote also to be part of the update?

On 1/30/2020 8:49 AM, Quentin Christensen wrote:

Hi everyone,

 

As you are all quick off the mark, this isn't completely new news, but confirming that yes, NVDA 2019.3 beta 3 is now available from: https://www.nvaccess.org/post/nvda-2019-3beta3-now-available-for-testing/ 

 

This is slight progression from the previous beta so you shouldn't notice too many big changes - of course as always happens, as we move closer to the final release, we don't put as many big new features in, but rather try to ensure that everything is stable and fix bugs people have reported in previous betas.

 

If you do encounter any issues, please do report them: https://github.com/nvaccess/nvda/issues  If you could also clarify whether they are new issues or existing issues (which hadn't previously been reported) that would be really helpful - both are important to know about, but being able to pinpoint when something started being an issue helps narrow down where to look for a fix.

 

All things going well, this will be the last beta before the release candidate, which will be just before the final stable release.

 

Kind regards

 

Quentin.

 

--

Quentin Christensen
Training and Support Manager

 

 

 

--

Quentin Christensen
Training and Support Manager

 

 



--
Quentin Christensen
Training and Support Manager
Re: NVDA 2019.3 Beta 3 now available

Quentin Christensen
 

Re the NVDARemote addon being detected as a trojan - this issue was rectified by Microsoft last week (or earlier, but at least last week, a day or so after it was reported anyway) - it should be fine now.  I just downloaded it and it's not being detected as a trojan here.  If anyone is still having that problem, please do let me know.

Re the question about couldn't we make a version of NVDA with Remote built-in and one without.  Theoretically, sure, although essentially that would be similar to now where you can download NVDA (as is) to have the version without Remote, and download the NVDARemote add-on to have the functionality. I'm not saying we're not willing to change it, just that essentially users have the choice currently of whether they want the functionality.

On Fri, Jan 31, 2020 at 5:49 AM Shaun Everiss <sm.everiss@...> wrote:

What you can do right now is turn off windows defender, unzip the addon into a empty folder, select all the files in that folder, and zip it back up then rename the file to nvda-addon.

Make sure you zip up the files and not make a new folder and zip that up because it won't work then.

Anyway after you do that, it works.

Its a bit more to do but it seems to fix it.

The only thing that makes sence is its the zipping program used, but who knows.

I have always used 7zip for zip and unzip opperations and use the 7z format for most things these days as do my friends.



On 31/01/2020 1:11 am, Robert Doc Wright godfearer wrote:

Should I then ignore the warning that Windows Defender is giving when it blocks the latest NVDA remote, claiming that there is a severe trojen?

 

******

My drinking team has a bowling problem.

Check out Family times on TuneIn or at this address:

http://www.wrighthere.net                                               

 

From: Rui Fontes
Sent: Thursday, January 30, 2020 5:02 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA 2019.3 Beta 3 now available

 

And it is not possible to make what Freedom Scientific have made?

One version with remote access and another without?

That way the companies and institutions can install the version without remote access while the majority of users will install the complete version with the remote access...

 

Rui Fontes

 

Às 04:29 de 30/01/2020, Robert Mendoza escreveu:

Hi, Quentin

This is noted. I appreciate of your diligent response
but before I letting off you go for this topic. I still have one more question from you. Smile.
Since we are close to stable phase of the nvda 2019.3
would there be a chance that the addons for the Remote will be release at the same time?

On 1/30/2020 11:36 AM, Quentin Christensen wrote:

Hi Robert,

 

Thanks for the question.  Firstly, for everyone, We've pushed out a couple of pull requests to update NVDARemote for 2019.3, so that will be available for the stable version.

 

As to including NVDA Remote into NVDA itself, even though many users use it frequently and it is vital for some users, it is not something we are looking at bringing into core at this point, One reason for this is we have a number of users in corporate environments and we would get a lot of pushback from them (or their IT people at least) on updating NVDA to a version with that functionality.

 

The main thing is that the functionality will continue to be available going forward, even though at this point that will still involve the separate add-on.

 

Regards

 

Quentin.

 

On Thu, Jan 30, 2020 at 1:59 PM Robert Mendoza <lowvisiontek@...> wrote:

Hi, Quentin

Thanks for the info however, I have clarification to ask if you don't mind.
Even so, if we are almost in the stable build version would there be a chance that the addons of the Remote also to be part of the update?

On 1/30/2020 8:49 AM, Quentin Christensen wrote:

Hi everyone,

 

As you are all quick off the mark, this isn't completely new news, but confirming that yes, NVDA 2019.3 beta 3 is now available from: https://www.nvaccess.org/post/nvda-2019-3beta3-now-available-for-testing/ 

 

This is slight progression from the previous beta so you shouldn't notice too many big changes - of course as always happens, as we move closer to the final release, we don't put as many big new features in, but rather try to ensure that everything is stable and fix bugs people have reported in previous betas.

 

If you do encounter any issues, please do report them: https://github.com/nvaccess/nvda/issues  If you could also clarify whether they are new issues or existing issues (which hadn't previously been reported) that would be really helpful - both are important to know about, but being able to pinpoint when something started being an issue helps narrow down where to look for a fix.

 

All things going well, this will be the last beta before the release candidate, which will be just before the final stable release.

 

Kind regards

 

Quentin.

 

--

Quentin Christensen
Training and Support Manager

 

 

 

--

Quentin Christensen
Training and Support Manager

 

 



--
Quentin Christensen
Training and Support Manager
Re: nvda 2019.3 beta 3 is out

Sue J. Ward
 

Hello. I am testing it on my second computer so far it is working good. Am wondering when in ccleaner when I go to the start up section and I tab over to the area where I can select the choices that are along the tab, such as windows, schedule tasks, text menu and services by using the right and left arrow keys it does not read that part of the screen it says unknown. Am running the beta version as a portable program on my computer. Has anyone experienced this? I don't know how to turn on or off the screen curtain would this make a difference in making ccleaner work better? In the old version of nvda am not getting this it is reading everything correctly. In the beta version it is working great on the browsers.
____________________________________________________________
Judge Judy Steps Down After 23 Years Over This Controversy
glancence-hality.com
http://thirdpartyoffers.juno.com/TGL3131/5e377654635bd76531845st03duc
wordpress 2fa and captcha

Shaun Everiss
 

Hi all.

While this is probably on topic for access it is a semi complex question so you may want to email me off list if its going to get a bit that way.

I assist with adminning a wordpress site and want to secure it.

I have used 2 factor authentication via text message (sms) and email for a while.

And thought that it may be an alternitive to captcha.

Currently though just about everything I found needs to be setup per user and not inforced by admins or anything.

Most plugins will allow 1 user up to 10 users for free but eventually you need to pay.

I don't think its fair for the users to pay to access a site just for the security to login, and that's my issue.

I have solved this with wordpress verification via jetpack which will protect everyone if they have their accounts in wordpress set for 2fa use and that in itself is fine.

There are ways to doodle with the php code to make it work but I don't have that access and it seems like you need to doodle with every theme on the site you use which is not ideal.

Unless there is a plugin that will by default get people to login with wordpress but at the same time I'd like a way that admins like the owner and myself can enter our passwords as backups would be good.

Sadly the only real solution I have is captcha and encouraging people to use 2fa on wordpress.

Of course it would be nice to just clear all the users and make everyone register and login with wordpress only.

We don't need many users here bare the admin users to be honest.

I use my username for backup and when I don't want to doodle with 2step such as doing admin things rather than posting things but I could use either.

I was thinking about captcha again.

Recaptcha has gotten a lot more stable but I know some have still issues with the audio.

My other idea was logic word or math captcha but are those that secure or should I just drop it.

I know there are google authenticators and the like but what I want is the ability for people to just login and either handle a text message or email and probably backup codes if they need.

I don't need anything totally advanced,  Its easier to put in captcha to be honest but still thats me for the day.
Re: Audacity with NVDA

Rosemarie Chavarria
 

What does this have to do with audacity?

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Chikodinaka mr. Oguledo
Sent: Sunday, February 2, 2020 5:25 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Audacity with NVDA

when will NVDA cannidate will come out?

On 2/2/20, Chikodinaka mr. Oguledo via Groups.Io <chikodinaka.2girls=gmail.com@groups.io> wrote:
please send me the ordassity to NVDA please. ?question? will it work
for the old nvda and the new NVDA? release? answer me

On 2/2/20, Daniel Damacena <danieldamacena.ma@gmail.com> wrote:
Thank you! I didn't even know there was an audacity addon for NVDA.

Em dom., 2 de fev. de 2020 às 05:57, bering.p <bering.p@wanadoo.fr>
escreveu:

Hi,
This is the current version in developpement, compatible with NVDA
2019.3 beta:

https://github.com/paulber007/AllMyNVDAAddons/raw/master/audacityAcc
essEnhancement/dev/audacityAccessEnhancement-1.3-dev20.nvda-addon

Best regards
Paul.

Le 02/02/2020 00:35, Hermann-Josef Kurzen a écrit :
Hi Bernd,

look here:
https://github.com/paulber007/AudacityNVDAAddon/releases#start-of-co
ntent


Greetings - Hermann

--- Ursprüngliche Nachricht ---
Von: "Bernd Dorer" <bdorer+nvda@mailbox.org> Wichtigkeit
Normal
Lesebestätigung wurde nicht angefordert Gesendet am: 01.02.2020
23:35:34
An: nvda@groups.io;
CC:
Betreff: [nvda] Audacity with NVDA
Verwendetes Mailprogramm: vermutlich online im WEB erstellt

Hi all,

some time ago there were 2 nvda addons for audacity. Does someone
know whether one of them has been updated for NVDA 2019.3 and if
not, where could I find them and if it's possible, what are the
differences of
them?

Thanks and best regards

Bernd







--
Daniel Damacena
Re: Audacity with NVDA

Roger Stewart
 

Thanks very much for this.

Roger

On 2/2/2020 2:57 AM, bering.p wrote:
Hi,
This is the current version in developpement, compatible with NVDA 2019.3 beta:
https://github.com/paulber007/AllMyNVDAAddons/raw/master/audacityAccessEnhancement/dev/audacityAccessEnhancement-1.3-dev20.nvda-addon

Best regards
Paul.

Le 02/02/2020 00:35, Hermann-Josef Kurzen a écrit :
Hi Bernd,

look here:
https://github.com/paulber007/AudacityNVDAAddon/releases#start-of-content


Greetings - Hermann

--- Ursprüngliche Nachricht ---
Von:         "Bernd Dorer" <bdorer+nvda@mailbox.org>  Wichtigkeit Normal
Lesebestätigung wurde nicht angefordert
Gesendet am: 01.02.2020 23:35:34
An:          nvda@groups.io;
CC:
Betreff:     [nvda] Audacity with NVDA
Verwendetes Mailprogramm: vermutlich online im WEB erstellt

Hi all,

some time ago there were 2 nvda addons for audacity. Does someone know
whether one of them has been updated for NVDA 2019.3 and if not, where
could I find them and if it's possible, what are the differences of them?

Thanks and best regards

Bernd






.
Re: Page numbers in microsoft word 365 desktop client

Jason White
 

I think you have to insert a section break after the front matter, then change the numbering style to Roman numerals for those pages.

However, I can't give more specifics, as I don't use Microsoft Word a lot. For serious writing, it's LaTeX as a matter of preference.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of amir din
Sent: Saturday, February 1, 2020 10:32 PM
To: nvda@nvda.groups.io
Subject: [nvda] Page numbers in microsoft word 365 desktop client

Hi,

Using nvda, with microsoft word 365 installed on windows 10. Now, normally if we open a document, the first will be page one. Nvda also said that. Imagine a large document containing many pages.

now, if we want to change it, like for example we want the first 3 pages are page I, II and III, and then the 4th page is numbered 1, and it continues from there. I did go to the insert -> page numbers, and successfully played with that so that if i go to the top of the file it will say page number 2 instead of 1, meaning i changed the starting page. But i cannot get it work the way i want as described. Normally the main content started after table of contents, then maybe the next page is the appreciation thing so not yet page one, then after that only the content or the first chapter, for example, begins so it is numbered as page 1.

Also, does the page number that nvda say when we press ctrl+page up or down is the same as what appeared on the screen. If we insert the page number, doesnt matter where, it could be top or bottom of the page, can we use the arrow keys to get to the page number? I tried but not found where it is, but nvda says it is page 2 page 3 etc.

Thanks.
Re: Audacity with NVDA

Chikodinaka mr. Oguledo
 

when will NVDA cannidate will come out?

On 2/2/20, Chikodinaka mr. Oguledo via Groups.Io
<chikodinaka.2girls=gmail.com@groups.io> wrote:
please send me the ordassity to NVDA please. ?question? will it work
for the old nvda and the new NVDA? release? answer me

On 2/2/20, Daniel Damacena <danieldamacena.ma@gmail.com> wrote:
Thank you! I didn't even know there was an audacity addon for NVDA.

Em dom., 2 de fev. de 2020 às 05:57, bering.p <bering.p@wanadoo.fr>
escreveu:

Hi,
This is the current version in developpement, compatible with NVDA
2019.3 beta:

https://github.com/paulber007/AllMyNVDAAddons/raw/master/audacityAccessEnhancement/dev/audacityAccessEnhancement-1.3-dev20.nvda-addon

Best regards
Paul.

Le 02/02/2020 00:35, Hermann-Josef Kurzen a écrit :
Hi Bernd,

look here:
https://github.com/paulber007/AudacityNVDAAddon/releases#start-of-content


Greetings - Hermann

--- Ursprüngliche Nachricht ---
Von: "Bernd Dorer" <bdorer+nvda@mailbox.org> Wichtigkeit
Normal
Lesebestätigung wurde nicht angefordert
Gesendet am: 01.02.2020 23:35:34
An: nvda@groups.io;
CC:
Betreff: [nvda] Audacity with NVDA
Verwendetes Mailprogramm: vermutlich online im WEB erstellt

Hi all,

some time ago there were 2 nvda addons for audacity. Does someone
know
whether one of them has been updated for NVDA 2019.3 and if not,
where
could I find them and if it's possible, what are the differences of
them?

Thanks and best regards

Bernd







--
Daniel Damacena
Re: Audacity with NVDA

Chikodinaka mr. Oguledo
 

please send me the ordassity to NVDA please. ?question? will it work
for the old nvda and the new NVDA? release? answer me

On 2/2/20, Daniel Damacena <danieldamacena.ma@gmail.com> wrote:
Thank you! I didn't even know there was an audacity addon for NVDA.

Em dom., 2 de fev. de 2020 às 05:57, bering.p <bering.p@wanadoo.fr>
escreveu:

Hi,
This is the current version in developpement, compatible with NVDA
2019.3 beta:

https://github.com/paulber007/AllMyNVDAAddons/raw/master/audacityAccessEnhancement/dev/audacityAccessEnhancement-1.3-dev20.nvda-addon

Best regards
Paul.

Le 02/02/2020 00:35, Hermann-Josef Kurzen a écrit :
Hi Bernd,

look here:
https://github.com/paulber007/AudacityNVDAAddon/releases#start-of-content


Greetings - Hermann

--- Ursprüngliche Nachricht ---
Von: "Bernd Dorer" <bdorer+nvda@mailbox.org> Wichtigkeit
Normal
Lesebestätigung wurde nicht angefordert
Gesendet am: 01.02.2020 23:35:34
An: nvda@groups.io;
CC:
Betreff: [nvda] Audacity with NVDA
Verwendetes Mailprogramm: vermutlich online im WEB erstellt

Hi all,

some time ago there were 2 nvda addons for audacity. Does someone know
whether one of them has been updated for NVDA 2019.3 and if not, where
could I find them and if it's possible, what are the differences of
them?

Thanks and best regards

Bernd







--
Daniel Damacena
Re: Audacity with NVDA

Daniel Damacena
 

Thank you! I didn't even know there was an audacity addon for NVDA.

Em dom., 2 de fev. de 2020 às 05:57, bering.p <bering.p@...> escreveu:

Hi,
This is the current version in developpement, compatible with NVDA
2019.3 beta:
https://github.com/paulber007/AllMyNVDAAddons/raw/master/audacityAccessEnhancement/dev/audacityAccessEnhancement-1.3-dev20.nvda-addon

Best regards
Paul.

Le 02/02/2020 00:35, Hermann-Josef Kurzen a écrit :
> Hi Bernd,
>
> look here:
> https://github.com/paulber007/AudacityNVDAAddon/releases#start-of-content
>
>
> Greetings - Hermann
>
> --- Ursprüngliche Nachricht ---
>> Von:         "Bernd Dorer" <bdorer+nvda@...>  Wichtigkeit Normal
>> Lesebestätigung wurde nicht angefordert
>> Gesendet am: 01.02.2020 23:35:34
>> An:          nvda@groups.io;
>> CC:
>> Betreff:     [nvda] Audacity with NVDA
>> Verwendetes Mailprogramm: vermutlich online im WEB erstellt
>>
>> Hi all,
>>
>> some time ago there were 2 nvda addons for audacity. Does someone know
>> whether one of them has been updated for NVDA 2019.3 and if not, where
>> could I find them and if it's possible, what are the differences of them?
>>
>> Thanks and best regards
>>
>> Bernd
>>
>>
>>
>
>
>
>
>





--
Daniel Damacena
Re: Audacity with NVDA

bering.p
 

Hi,
This is the current version in developpement, compatible with NVDA 2019.3 beta:
https://github.com/paulber007/AllMyNVDAAddons/raw/master/audacityAccessEnhancement/dev/audacityAccessEnhancement-1.3-dev20.nvda-addon

Best regards
Paul.

Le 02/02/2020 00:35, Hermann-Josef Kurzen a écrit :
Hi Bernd,

look here:
https://github.com/paulber007/AudacityNVDAAddon/releases#start-of-content


Greetings - Hermann

--- Ursprüngliche Nachricht ---
Von: "Bernd Dorer" <bdorer+nvda@mailbox.org> Wichtigkeit Normal
Lesebestätigung wurde nicht angefordert
Gesendet am: 01.02.2020 23:35:34
An: nvda@groups.io;
CC:
Betreff: [nvda] Audacity with NVDA
Verwendetes Mailprogramm: vermutlich online im WEB erstellt

Hi all,

some time ago there were 2 nvda addons for audacity. Does someone know
whether one of them has been updated for NVDA 2019.3 and if not, where
could I find them and if it's possible, what are the differences of them?

Thanks and best regards

Bernd
keyboards in general

Shaun Everiss
 

Hmmm.

Well I do know that keyboards can get dirty.

My one you can pull the keys off and clean it out however I have never actually done this for no reason what so ever but that I keep saying I will actually look at the manual and get a sightling to help me with it but I don't.

So it can be done but I have never done it.

Sara I assume that this is a rechargable battery and not one of those you have to keep replacing batteries is this right?

I have only had the replaceable kind.

Is this an internal or can you remove the battery.

Even those that recharge have a life is there a way to see if its holding charge for the time it should?

Do you have the latest driver software for it if any and firmware if any.

Sometimes my corded gaming board does this and I just reflash the firmware and factory reset it not that I have anything really stored in there.

It has happened a couple times and I have always managed to reset it and it works again.

Its not happened that much though.


On 2/02/2020 8:01 pm, Sarah k Alawami wrote:

Actually I had to restart every minute or so. And since the battery was plugged in before I went wireless, I know I didn't run out of battery. The charge is 25 hours in length and I was only unplugged for 5. It happened mainly on web interfaces, but also happened in other programs I was in. And in this case my short cut key I used did not help. And one time typing nvda -r in the run didn't even restart nvda. That was a disaster. I did try with add ons disabled, but no joy.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on [twitch.](twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

Finally, to become a patron and help support the podcast go here

On 1 Feb 2020, at 21:00, Shaun Everiss wrote:

Restart nvda and it should be fine.

But if you are getting these cutouts on your wireless keyboard, I wouldn't surprised if you have a battery which is about discharged.

I have had people have issues like this with their boards.

Keep a supply of batteries for your wireless devices if not at all times at least a pack or 2 and especially for emergencies, because they can go at any time.

If you know how long a battery lasts well make sure you have some nearbuy or on hand or you can get them if they decide to be bad.

Temperarily if you have no batteries you may be able to hault this by pulling and then reincerting the wireless dongle transmitter which is what I did but I have had many a time where a system got stuffed up because someone didn't have a lot of batteries.

Good things are that unlike older times hwere you needed large c or d batteries most units have tripple or double a batteries and a lot of devices use them.

Take out your wireless board and replace them.

I'd also buy a cheap basic wired board fir times you don't have batteries.



On 2/02/2020 5:40 pm, Sarah k Alawami wrote:

No it does not. nIt now happens about every 30 or so seconds now. I'm using a wireless keyboard so not sure if this is the cause. It just suddednly startred happening. Here is the debug log. If it does not end up sending, it is because thunderbird wants to send early with out me pasting.


DEBUG - __main__ (20:33:15.440):
Provided arguments: ['C:\\Program Files (x86)\\NVDA\\nvda.exe', '-r', '--debug-logging']
INFO - __main__ (20:33:15.440):
Starting NVDA
DEBUG - __main__ (20:33:15.441):
Debug level logging enabled
DEBUG - core.main (20:33:16.887):
Core starting
INFO - core.main (20:33:16.888):
Config dir: C:\Users\Sarah\AppData\Roaming\nvda
DEBUG - core.main (20:33:16.888):
loading config
INFO - config.ConfigManager._loadConfig (20:33:16.888):
Loading config: C:\Users\Sarah\AppData\Roaming\nvda\nvda.ini
DEBUG - config.profileUpgrader.upgrade (20:33:16.891):
Current config schema version: 2, latest: 2
DEBUG - fileUtils.FaultTolerantFile (20:33:16.898):
C:\Users\Sarah\AppData\Roaming\nvda\nvda.ini25g9dx.tmp
INFO - config.ConfigManager._loadConfig (20:33:16.901):
Config loaded (after upgrade, and in the state it will be used by NVDA):
{u'schemaVersion': u'2', u'upgrade': {}, u'update': {u'autoCheck': u'True', u'startupNotification': u'True', u'allowUsageStats': u'True', u'askedAllowUsageStats': u'True'}, u'general': {u'showWelcomeDialogAtStartup': u'False', u'language': u'Windows', u'saveConfigurationOnExit': u'True', u'askToExit': u'True', u'playStartAndExitSounds': u'True', u'loggingLevel': u'INFO'}, u'speech': {u'synth': u'oneCore', u'outputDevice': u'Speakers (Plugable USB Audio De', u'symbolLevel': u'100', u'espeak': {u'voice': u'en-us', u'variant': u'klatt2', u'rate': u'20', u'pitch': u'46', u'inflection': u'100', u'volume': u'100', u'rateBoost': u'True'}, u'oneCore': {u'voice': u'HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Speech_OneCore\\Voices\\Tokens\\MSTTS_V110_enCA_RichardM', u'volume': u'100', u'rate': u'30', u'rateBoost': u'True'}, u'oldeloquence': {u'voice': u'65536', u'variant': u'1', u'pitch': u'70', u'inflection': u'100', u'volume': u'100', u'rgh': u'0', u'bth': u'50', u'rate': u'100'}}, u'braille': {u'autoTether': u'False', u'tetherTo': u'review', u'noBraille': {u'port': u''}}, u'keyboard': {u'keyboardLayout': u'laptop', u'useCapsLockAsNVDAModifierKey': u'True', u'useExtendedInsertAsNVDAModifierKey': u'False', u'speakTypedCharacters': u'False', u'speakTypedWords': u'True', u'allowSkimReadingInSayAll': u'True', u'speakCommandKeys': u'False', u'useNumpadInsertAsNVDAModifierKey': u'False', u'alertForSpellingErrors': u'False'}, u'objsounds': {u'enabled': u'True'}, u'mouse': {u'enableMouseTracking': u'True'}, u'uwpOcr': {u'language': u'en-US'}, u'presentation': {u'reportDynamicContentChanges': u'True', u'progressBarUpdates': {u'progressBarOutputMode': u'off'}}, u'audio': {u'audioDuckingMode': u'0'}, u'audioThemes': {u'speakRole': u'True'}, u'development': {}, u'speechViewer': {u'x': u'68', u'y': u'44', u'width': u'500', u'height': u'500', u'displays': [u'(1920, 1080)'], u'autoPositionWindow': u'False'}, u'reviewCursor': {u'followCaret': u'True'}, u'virtualBuffers': {u'autoFocusFocusableElements': u'False', u'useScreenLayout': u'False'}}
DEBUG - core.main (20:33:16.961):
setting language to Windows
INFO - core.main (20:33:16.963):
NVDA version 2019.2.1
INFO - core.main (20:33:16.963):
Using Windows version 10.0.18363 workstation
INFO - core.main (20:33:16.963):
Using Python version 2.7.16 (v2.7.16:413a49145e, Mar  4 2019, 01:30:55) [MSC v.1500 32 bit (Intel)]
INFO - core.main (20:33:16.963):
Using comtypes version 1.1.7
INFO - core.main (20:33:16.963):
Using configobj version 5.1.0 with validate version 1.0.1
DEBUG - core.main (20:33:16.967):
Initializing add-ons system
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.967):
Listing add-ons from C:\Users\Sarah\AppData\Roaming\nvda\addons
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.969):
Loading add-on from C:\Users\Sarah\AppData\Roaming\nvda\addons\addonUpdater
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.970):
Found add-on addonUpdater - 20.01.1. Requires API: (2019, 2, 0). Last-tested API: (2019, 3, 0)
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.970):
Loading add-on from C:\Users\Sarah\AppData\Roaming\nvda\addons\AudioThemes3D
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.970):
Found add-on AudioThemes3D - 5.1. Requires API: (0, 0, 0). Last-tested API: (0, 0, 0)
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.970):
Disabling add-on AudioThemes3D
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.971):
Loading add-on from C:\Users\Sarah\AppData\Roaming\nvda\addons\clipCopy
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.973):
Found add-on clipCopy - 0.20120604.01. Requires API: (0, 0, 0). Last-tested API: (0, 0, 0)
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.973):
Disabling add-on clipCopy
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.973):
Loading add-on from C:\Users\Sarah\AppData\Roaming\nvda\addons\DragAndDrop
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.973):
Found add-on DragAndDrop - 2.0dev. Requires API: (2016, 1, 0). Last-tested API: (2019, 3, 0)
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.973):
Loading add-on from C:\Users\Sarah\AppData\Roaming\nvda\addons\Mozilla
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.976):
Found add-on Mozilla - 1.9.2. Requires API: (2018, 1, 0). Last-tested API: (2019, 3, 0)
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.976):
Loading add-on from C:\Users\Sarah\AppData\Roaming\nvda\addons\objPad
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.977):
Found add-on objPad - 19.05.2. Requires API: (2017, 3, 0). Last-tested API: (2019, 3, 0)
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.979):
Loading add-on from C:\Users\Sarah\AppData\Roaming\nvda\addons\remote
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.979):
Found add-on remote - 2.2. Requires API: (0, 0, 0). Last-tested API: (0, 0, 0)
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.979):
Loading add-on from C:\Users\Sarah\AppData\Roaming\nvda\addons\translate
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.980):
Found add-on translate - 2019.03.3. Requires API: (2018, 3, 0). Last-tested API: (2018, 4, 0)
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.980):
Loading add-on from C:\Users\Sarah\AppData\Roaming\nvda\addons\Weather_Plus
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.982):
Found add-on Weather_Plus - 7.3. Requires API: (2017, 3, 0). Last-tested API: (2019, 3, 0)
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.982):
Loading add-on from C:\Users\Sarah\AppData\Roaming\nvda\addons\wintenApps
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.983):
Found add-on wintenApps - 19.11.4. Requires API: (2019, 2, 0). Last-tested API: (2019, 3, 0)
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.983):
Disabling add-on wintenApps
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.983):
Loading add-on from C:\Users\Sarah\AppData\Roaming\nvda\addons\winWizard
DEBUG - addonHandler._getAvailableAddonsFromPath (20:33:16.984):
Found add-on winWizard - 2.5. Requires API: (0, 0, 0). Last-tested API: (0, 0, 0)
DEBUGWARNING - touchHandler.touchSupported (20:33:17.048):
No touch devices found
DEBUG - core.main (20:33:17.108):
Initializing appModule Handler
DEBUG - addonHandler.Addon.addToPackagePath (20:33:17.108):
Addon Mozilla added to appModules package path
DEBUG - core.main (20:33:17.108):
Initializing NVDAHelper
DEBUG - core.main (20:33:17.157):
Speech Dictionary processing
DEBUG - speechDictHandler.SpeechDict.load (20:33:17.157):
Loading speech dictionary 'C:\Users\Sarah\AppData\Roaming\nvda\speechDicts\default.dic'...
DEBUG - speechDictHandler.SpeechDict.load (20:33:17.157):
file 'C:\Users\Sarah\AppData\Roaming\nvda\speechDicts\default.dic' not found.
DEBUG - speechDictHandler.SpeechDict.load (20:33:17.157):
Loading speech dictionary 'builtin.dic'...
DEBUG - speechDictHandler.SpeechDict.load (20:33:17.157):
3 loaded records.
DEBUG - core.main (20:33:17.157):
Initializing speech
DEBUG - speechDictHandler.SpeechDict.load (20:33:17.378):
Loading speech dictionary 'C:\Users\Sarah\AppData\Roaming\nvda\speechDicts\voiceDicts.v1\oneCore\oneCore-Microsoft Richard.dic'...
DEBUG - speechDictHandler.SpeechDict.load (20:33:17.378):
file 'C:\Users\Sarah\AppData\Roaming\nvda\speechDicts\voiceDicts.v1\oneCore\oneCore-Microsoft Richard.dic' not found.
DEBUG - synthDriverHandler.SynthDriver.loadSettings (20:33:17.378):
Loaded settings for SynthDriver oneCore
INFO - synthDriverHandler.setSynth (20:33:17.378):
Loaded synthDriver oneCore
INFO - core.main (20:33:17.378):
Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5
DEBUG - core.main (20:33:17.381):
Initializing braille input
INFO - brailleInput.initialize (20:33:17.381):
Braille input initialized
DEBUG - core.main (20:33:17.381):
Initializing braille
INFO - braille.initialize (20:33:17.381):
Using liblouis version 3.10.0
INFO - braille.BrailleHandler.setDisplayByName (20:33:17.385):
Loaded braille display driver noBraille, current display has 0 cells.
DEBUG - core.main (20:33:17.385):
Initializing displayModel
DEBUG - core.main (20:33:17.385):
Initializing GUI
DEBUG - core.main (20:33:17.413):
initializing Java Access Bridge support
WARNING - core.main (20:33:17.413):
Java Access Bridge not available
DEBUG - core.main (20:33:17.414):
Initializing legacy winConsole support
DEBUG - core.main (20:33:17.414):
Initializing UIA support
INFO - _UIAHandler.UIAHandler.MTAThreadFunc (20:33:17.426):
UIAutomation: IUIAutomation6
DEBUG - core.main (20:33:17.986):
Initializing IAccessible support
DEBUG - core.main (20:33:17.987):
Initializing input core
DEBUGWARNING - inputCore.InputManager.loadLocaleGestureMap (20:33:17.987):
No locale gesture map for language en
DEBUGWARNING - inputCore.InputManager.loadUserGestureMap (20:33:17.987):
No user gesture map
DEBUG - core.main (20:33:17.987):
Initializing keyboard handler
DEBUG - core.main (20:33:17.987):
initializing mouse handler
DEBUG - core.main (20:33:18.016):
Initializing touchHandler
DEBUGWARNING - touchHandler.touchSupported (20:33:18.016):
No touch devices found
DEBUG - core.main (20:33:18.016):
Initializing global plugin handler
DEBUG - addonHandler.Addon.addToPackagePath (20:33:18.016):
Addon addonUpdater added to globalPlugins package path
DEBUG - addonHandler.Addon.addToPackagePath (20:33:18.017):
Addon DragAndDrop added to globalPlugins package path
DEBUG - addonHandler.Addon.addToPackagePath (20:33:18.017):
Addon objPad added to globalPlugins package path
DEBUG - addonHandler.Addon.addToPackagePath (20:33:18.017):
Addon remote added to globalPlugins package path
DEBUG - addonHandler.Addon.addToPackagePath (20:33:18.017):
Addon translate added to globalPlugins package path
DEBUG - addonHandler.Addon.addToPackagePath (20:33:18.017):
Addon Weather_Plus added to globalPlugins package path
DEBUG - addonHandler.Addon.addToPackagePath (20:33:18.017):
Addon winWizard added to globalPlugins package path
INFO - external:globalPlugins.translate.GlobalPlugin.__init__ (20:33:21.121):
Translate module initialized, translating to en
DEBUGWARNING - Python warning (20:33:21.147):
C:\Users\Sarah\AppData\Roaming\nvda\addons\remote\globalPlugins\remoteClient\configuration.py:5: DeprecationWarning: Importing validate directly is deprecated. Please use configobj.validate instead
DEBUG - core.main (20:33:21.190):
Initializing core pump
DEBUG - core.main (20:33:21.190):
Initializing watchdog
DEBUG - core.main (20:33:21.191):
initializing updateCheck
INFO - core.main (20:33:21.191):
NVDA initialized
DEBUG - core.main (20:33:21.193):
entering wx application main loop
DEBUG - treeInterceptorHandler.update (20:33:21.351):
Adding new treeInterceptor to runningTable: <NVDAObjects.IAccessible.chromium.ChromeVBuf object at 0x0556F9B0>
DEBUGWARNING - virtualBuffers.VirtualBuffer.prepare (20:33:21.351):
appModule has no binding handle to injected code, can't prepare virtualBuffer yet.
DEBUGWARNING - virtualBuffers.VirtualBuffer.prepare (20:33:21.354):
appModule has no binding handle to injected code, can't prepare virtualBuffer yet.
DEBUGWARNING - virtualBuffers.VirtualBuffer.prepare (20:33:21.355):
appModule has no binding handle to injected code, can't prepare virtualBuffer yet.
DEBUGWARNING - virtualBuffers.VirtualBuffer.prepare (20:33:21.357):
appModule has no binding handle to injected code, can't prepare virtualBuffer yet.
DEBUGWARNING - virtualBuffers.VirtualBuffer.prepare (20:33:21.358):
appModule has no binding handle to injected code, can't prepare virtualBuffer yet.
DEBUGWARNING - virtualBuffers.VirtualBuffer.prepare (20:33:21.361):
appModule has no binding handle to injected code, can't prepare virtualBuffer yet.
DEBUGWARNING - virtualBuffers.VirtualBuffer.prepare (20:33:21.361):
appModule has no binding handle to injected code, can't prepare virtualBuffer yet.
DEBUGWARNING - virtualBuffers.VirtualBuffer.prepare (20:33:21.364):
appModule has no binding handle to injected code, can't prepare virtualBuffer yet.
DEBUGWARNING - virtualBuffers.VirtualBuffer.prepare (20:33:21.365):
appModule has no binding handle to injected code, can't prepare virtualBuffer yet.
DEBUGWARNING - virtualBuffers.VirtualBuffer.prepare (20:33:21.367):
appModule has no binding handle to injected code, can't prepare virtualBuffer yet.
DEBUGWARNING - virtualBuffers.VirtualBuffer.prepare (20:33:21.369):
appModule has no binding handle to injected code, can't prepare virtualBuffer yet.
DEBUGWARNING - virtualBuffers.VirtualBuffer.prepare (20:33:21.371):
appModule has no binding handle to injected code, can't prepare virtualBuffer yet.
DEBUGWARNING - virtualBuffers.VirtualBuffer.prepare (20:33:21.372):
appModule has no binding handle to injected code, can't prepare virtualBuffer yet.
DEBUGWARNING - virtualBuffers.VirtualBuffer.prepare (20:33:21.374):
appModule has no binding handle to injected code, can't prepare virtualBuffer yet.
DEBUGWARNING - virtualBuffers.VirtualBuffer.prepare (20:33:21.375):
appModule has no binding handle to injected code, can't prepare virtualBuffer yet.
DEBUGWARNING - virtualBuffers.VirtualBuffer.prepare (20:33:21.377):
appModule has no binding handle to injected code, can't prepare virtualBuffer yet.
DEBUGWARNING - virtualBuffers.VirtualBuffer.prepare (20:33:21.381):
appModule has no binding handle to injected code, can't prepare virtualBuffer yet.
DEBUGWARNING - virtualBuffers.VirtualBuffer.prepare (20:33:21.384):
appModule has no binding handle to injected code, can't prepare virtualBuffer yet.
DEBUGWARNING - virtualBuffers.VirtualBuffer.prepare (20:33:21.387):
appModule has no binding handle to injected code, can't prepare virtualBuffer yet.
DEBUGWARNING - virtualBuffers.VirtualBuffer.prepare (20:33:21.388):
appModule has no binding handle to injected code, can't prepare virtualBuffer yet.
DEBUGWARNING - virtualBuffers.VirtualBuffer.prepare (20:33:21.391):
appModule has no binding handle to injected code, can't prepare virtualBuffer yet.
DEBUGWARNING - virtualBuffers.VirtualBuffer.prepare (20:33:21.391):
appModule has no binding handle to injected code, can't prepare virtualBuffer yet.
IO - speech.speak (20:33:21.401):
Speaking [LangChangeCommand (u'en_CA'), u'Stream Manager - Twitch document']
DEBUGWARNING - characterProcessing._getSpeechSymbolsForLocale (20:33:21.401):
No CLDR data for locale en_CA
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:21.523):
Begin processing speech
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:21.572):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:21.572):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:22.430):
Queue empty, done processing
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:23.594):
Cancelling
IO - inputCore.InputManager.executeGesture (20:33:23.668):
Input: kb(laptop):windows+m
IO - speech.speak (20:33:23.803):
Speaking [LangChangeCommand (u'en_CA'), u'FolderView  list']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:23.815):
Begin processing speech
IO - speech.speak (20:33:23.819):
Speaking [LangChangeCommand (u'en_CA'), u'Navigraph FMS Data Manager  30 of 64']
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:23.825):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:23.825):
Begin processing speech
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:24.236):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:24.237):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:24.239):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:24.240):
Queue empty, done processing
IO - inputCore.InputManager.executeGesture (20:33:24.303):
Input: kb(laptop):alt+tab
IO - speech.speak (20:33:24.362):
Speaking [LangChangeCommand (u'en_CA'), u'Stream Manager - Twitch - Google Chrome  row 1  column 1']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:24.369):
Begin processing speech
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:24.385):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:24.385):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:24.888):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:24.890):
Queue empty, done processing
IO - speech.speak (20:33:24.892):
Speaking [LangChangeCommand (u'en_CA'), u'Stream Manager - Twitch - Google Chrome']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:24.901):
Begin processing speech
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:24.915):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:24.917):
Calling idle on audio player
DEBUG - virtualBuffers.VirtualBuffer._loadBuffer (20:33:25.178):
Buffer load took 0.065 sec, 10534 chars
IO - speech.speak (20:33:25.220):
Speaking [LangChangeCommand (u'en_CA'), u'Stream Manager - Twitch document']
IO - speech.speak (20:33:25.226):
Speaking [LangChangeCommand (u'en_CA'), u'main landmark ', u'complementary landmark ', u'jessiepp123', u'button']
IO - speech.speak (20:33:25.234):
Speaking [LangChangeCommand (u'en_CA'), u'Stream Manager - Twitch']
DEBUG - queueHandler.registerGeneratorObject (20:33:25.236):
Adding generator 1
DEBUGWARNING - NVDAObjects.IAccessible.IAccessible._get_IAccessibleRole (20:33:25.243):
accRole failed: (-2147024809, 'The parameter is incorrect.', (None, None, None, 0, None))
IO - speech.speak (20:33:25.249):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'jessiepp123', u'hi jake.']
IO - speech.speak (20:33:25.269):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'Send a message  edit  multi line', u'out of edit']
IO - speech.speak (20:33:25.289):
Speaking [IndexCommand(3), LangChangeCommand (u'en_CA'), u'button', u'Emote picker']
IO - speech.speak (20:33:25.302):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'button', u'Chat settings']
IO - speech.speak (20:33:25.315):
Speaking [IndexCommand(5), LangChangeCommand (u'en_CA'), u'button', u'Chat']
IO - speech.speak (20:33:25.335):
Speaking [IndexCommand(6), LangChangeCommand (u'en_CA'), u'graphic', u'jessiepp123']
IO - speech.speak (20:33:25.349):
Speaking [IndexCommand(7), LangChangeCommand (u'en_CA'), u'heading  level 4', u'visited  link', u'jessiepp123']
IO - speech.speak (20:33:25.364):
Speaking [IndexCommand(8), LangChangeCommand (u'en_CA'), u'Account Created March 28, 2015']
IO - speech.speak (20:33:25.384):
Speaking [IndexCommand(9), LangChangeCommand (u'en_CA'), u'Following Since January 1, 2017']
IO - speech.speak (20:33:25.397):
Speaking [IndexCommand(10), LangChangeCommand (u'en_CA'), u'button', u'Unfriend']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:25.871):
Begin processing speech
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:25.888):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:25.888):
Begin processing speech
IO - inputCore.InputManager.executeGesture (20:33:26.565):
Input: kb(laptop):f
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:26.581):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:26.584):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:26.585):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:26.585):
Queue empty, done processing
DEBUG - queueHandler.registerGeneratorObject (20:33:26.609):
Adding generator 2
IO - speech.speak (20:33:26.638):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'Send a message  edit  multi line', u'out of edit']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:26.644):
Begin processing speech
IO - speech.speak (20:33:26.663):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'button', u'Emote picker']
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:26.668):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:26.668):
Begin processing speech
IO - speech.speak (20:33:26.677):
Speaking [IndexCommand(3), LangChangeCommand (u'en_CA'), u'button', u'Chat settings']
IO - speech.speak (20:33:26.691):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'button', u'Chat']
IO - speech.speak (20:33:26.710):
Speaking [IndexCommand(5), LangChangeCommand (u'en_CA'), u'graphic', u'jessiepp123']
IO - speech.speak (20:33:26.723):
Speaking [IndexCommand(6), LangChangeCommand (u'en_CA'), u'heading  level 4', u'visited  link', u'jessiepp123']
IO - speech.speak (20:33:26.743):
Speaking [IndexCommand(7), LangChangeCommand (u'en_CA'), u'Account Created March 28, 2015']
IO - speech.speak (20:33:26.755):
Speaking [IndexCommand(8), LangChangeCommand (u'en_CA'), u'Following Since January 1, 2017']
IO - speech.speak (20:33:26.775):
Speaking [IndexCommand(9), LangChangeCommand (u'en_CA'), u'button', u'Unfriend']
IO - speech.speak (20:33:26.789):
Speaking [IndexCommand(10), LangChangeCommand (u'en_CA'), u'button', u'Whisper']
IO - speech.speak (20:33:26.805):
Speaking [IndexCommand(11), LangChangeCommand (u'en_CA'), u'button', u'More options']
IO - inputCore.InputManager.executeGesture (20:33:27.448):
Input: kb(laptop):shift+f
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:27.453):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:27.453):
Cancelled, stopped pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:27.453):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:27.453):
Queue empty, done processing
DEBUG - queueHandler.registerGeneratorObject (20:33:27.463):
Adding generator 3
IO - speech.speak (20:33:27.473):
Speaking [LangChangeCommand (u'en_CA'), u'out of edit']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:27.480):
Begin processing speech
IO - speech.speak (20:33:27.482):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'jessiepp123', u'hi jake.']
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:27.487):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:27.487):
Begin processing speech
IO - speech.speak (20:33:27.503):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'Send a message  edit  multi line', u'out of edit']
IO - speech.speak (20:33:27.519):
Speaking [IndexCommand(3), LangChangeCommand (u'en_CA'), u'button', u'Emote picker']
IO - speech.speak (20:33:27.540):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'button', u'Chat settings']
IO - speech.speak (20:33:27.553):
Speaking [IndexCommand(5), LangChangeCommand (u'en_CA'), u'button', u'Chat']
IO - speech.speak (20:33:27.568):
Speaking [IndexCommand(6), LangChangeCommand (u'en_CA'), u'graphic', u'jessiepp123']
IO - speech.speak (20:33:27.585):
Speaking [IndexCommand(7), LangChangeCommand (u'en_CA'), u'heading  level 4', u'visited  link', u'jessiepp123']
IO - speech.speak (20:33:27.598):
Speaking [IndexCommand(8), LangChangeCommand (u'en_CA'), u'Account Created March 28, 2015']
IO - speech.speak (20:33:27.617):
Speaking [IndexCommand(9), LangChangeCommand (u'en_CA'), u'Following Since January 1, 2017']
IO - speech.speak (20:33:27.635):
Speaking [IndexCommand(10), LangChangeCommand (u'en_CA'), u'button', u'Unfriend']
IO - speech.speak (20:33:27.645):
Speaking [IndexCommand(11), LangChangeCommand (u'en_CA'), u'button', u'Whisper']
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:27.869):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:27.869):
Begin processing speech
IO - inputCore.InputManager.executeGesture (20:33:28.165):
Input: kb(laptop):shift+f
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:28.174):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:28.174):
Cancelled, stopped pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:28.176):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:28.176):
Queue empty, done processing
DEBUG - queueHandler.registerGeneratorObject (20:33:28.187):
Adding generator 4
IO - speech.speak (20:33:28.193):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'masterjake00', u'Nope.']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:28.200):
Begin processing speech
IO - speech.speak (20:33:28.221):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(3), u'button', u'jessiepp123', u'hi jake.']
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:28.240):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:28.240):
Begin processing speech
IO - speech.speak (20:33:28.255):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'Send a message  edit  multi line', u'out of edit']
IO - speech.speak (20:33:28.269):
Speaking [IndexCommand(5), LangChangeCommand (u'en_CA'), u'button', u'Emote picker']
IO - speech.speak (20:33:28.285):
Speaking [IndexCommand(6), LangChangeCommand (u'en_CA'), u'button', u'Chat settings']
IO - speech.speak (20:33:28.302):
Speaking [IndexCommand(7), LangChangeCommand (u'en_CA'), u'button', u'Chat']
IO - speech.speak (20:33:28.318):
Speaking [IndexCommand(8), LangChangeCommand (u'en_CA'), u'graphic', u'jessiepp123']
IO - speech.speak (20:33:28.335):
Speaking [IndexCommand(9), LangChangeCommand (u'en_CA'), u'heading  level 4', u'visited  link', u'jessiepp123']
IO - speech.speak (20:33:28.348):
Speaking [IndexCommand(10), LangChangeCommand (u'en_CA'), u'Account Created March 28, 2015']
IO - speech.speak (20:33:28.367):
Speaking [IndexCommand(11), LangChangeCommand (u'en_CA'), u'Following Since January 1, 2017']
IO - speech.speak (20:33:29.301):
Speaking [IndexCommand(12), LangChangeCommand (u'en_CA'), u'button', u'Unfriend']
IO - inputCore.InputManager.executeGesture (20:33:29.367):
Input: kb(laptop):shift+f
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:29.375):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:29.378):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:29.378):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:29.378):
Queue empty, done processing
DEBUG - queueHandler.registerGeneratorObject (20:33:29.390):
Adding generator 5
IO - speech.speak (20:33:29.395):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'masterjake00', u'Nope.']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:29.401):
Begin processing speech
IO - speech.speak (20:33:29.426):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(3), u'button', u'jessiepp123', u'hi jake.']
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:29.440):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:29.440):
Begin processing speech
IO - speech.speak (20:33:29.457):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'Send a message  edit  multi line', u'out of edit']
IO - speech.speak (20:33:29.473):
Speaking [IndexCommand(5), LangChangeCommand (u'en_CA'), u'button', u'Emote picker']
IO - speech.speak (20:33:29.490):
Speaking [IndexCommand(6), LangChangeCommand (u'en_CA'), u'button', u'Chat settings']
IO - speech.speak (20:33:29.515):
Speaking [IndexCommand(7), LangChangeCommand (u'en_CA'), u'button', u'Chat']
IO - speech.speak (20:33:29.540):
Speaking [IndexCommand(8), LangChangeCommand (u'en_CA'), u'graphic', u'jessiepp123']
IO - speech.speak (20:33:29.552):
Speaking [IndexCommand(9), LangChangeCommand (u'en_CA'), u'heading  level 4', u'visited  link', u'jessiepp123']
IO - speech.speak (20:33:29.568):
Speaking [IndexCommand(10), LangChangeCommand (u'en_CA'), u'Account Created March 28, 2015']
IO - speech.speak (20:33:29.585):
Speaking [IndexCommand(11), LangChangeCommand (u'en_CA'), u'Following Since January 1, 2017']
IO - inputCore.InputManager.executeGesture (20:33:29.984):
Input: kb(laptop):shift+f
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:29.984):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:29.987):
Cancelled, stopped pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:29.987):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:29.987):
Queue empty, done processing
DEBUG - queueHandler.registerGeneratorObject (20:33:29.999):
Adding generator 6
IO - speech.speak (20:33:30.022):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'masterjake00', u'Alex']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:30.028):
Begin processing speech
IO - speech.speak (20:33:30.036):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(3), u'button', u'masterjake00', u'Nope.']
IO - speech.speak (20:33:30.068):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(5), u'button', u'jessiepp123', u'hi jake.']
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:30.069):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:30.069):
Begin processing speech
IO - speech.speak (20:33:30.099):
Speaking [IndexCommand(6), LangChangeCommand (u'en_CA'), u'Send a message  edit  multi line', u'out of edit']
IO - speech.speak (20:33:30.117):
Speaking [IndexCommand(7), LangChangeCommand (u'en_CA'), u'button', u'Emote picker']
IO - speech.speak (20:33:30.128):
Speaking [IndexCommand(8), LangChangeCommand (u'en_CA'), u'button', u'Chat settings']
IO - speech.speak (20:33:30.145):
Speaking [IndexCommand(9), LangChangeCommand (u'en_CA'), u'button', u'Chat']
IO - speech.speak (20:33:30.167):
Speaking [IndexCommand(10), LangChangeCommand (u'en_CA'), u'graphic', u'jessiepp123']
IO - inputCore.InputManager.executeGesture (20:33:30.171):
Input: kb(laptop):shift+f
IO - speech.speak (20:33:30.177):
Speaking [IndexCommand(11), LangChangeCommand (u'en_CA'), u'heading  level 4', u'visited  link', u'jessiepp123']
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:30.178):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:30.180):
Cancelled, stopped pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:30.181):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:30.190):
Queue empty, done processing
DEBUG - queueHandler.registerGeneratorObject (20:33:30.203):
Adding generator 7
IO - speech.speak (20:33:30.207):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'masterjake00', u'Ale can you hear my messages?']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:30.213):
Begin processing speech
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:30.259):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:30.260):
Calling idle on audio player
IO - speech.speak (20:33:30.263):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(3), u'button', u'masterjake00', u'Alex']
IO - speech.speak (20:33:30.289):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(5), u'button', u'masterjake00', u'Nope.']
IO - speech.speak (20:33:30.319):
Speaking [IndexCommand(6), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(7), u'button', u'jessiepp123', u'hi jake.']
IO - speech.speak (20:33:30.348):
Speaking [IndexCommand(8), LangChangeCommand (u'en_CA'), u'Send a message  edit  multi line', u'out of edit']
IO - speech.speak (20:33:30.365):
Speaking [IndexCommand(9), LangChangeCommand (u'en_CA'), u'button', u'Emote picker']
IO - speech.speak (20:33:30.384):
Speaking [IndexCommand(10), LangChangeCommand (u'en_CA'), u'button', u'Chat settings']
IO - speech.speak (20:33:30.395):
Speaking [IndexCommand(11), LangChangeCommand (u'en_CA'), u'button', u'Chat']
IO - inputCore.InputManager.executeGesture (20:33:30.625):
Input: kb(laptop):shift+f
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:30.631):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:30.634):
Queue empty, done processing
DEBUG - queueHandler.registerGeneratorObject (20:33:30.648):
Adding generator 8
IO - speech.speak (20:33:30.653):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'masterjake00', u"Mmm, they'd be all nicely roasted too."]
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:30.658):
Begin processing speech
IO - speech.speak (20:33:30.690):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(3), u'button', u'masterjake00', u'Ale can you hear my messages?']
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:30.710):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:30.710):
Begin processing speech
IO - speech.speak (20:33:30.740):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(5), u'button', u'masterjake00', u'Alex']
IO - speech.speak (20:33:30.759):
Speaking [IndexCommand(6), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(7), u'button', u'masterjake00', u'Nope.']
IO - speech.speak (20:33:30.789):
Speaking [IndexCommand(8), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(9), u'button', u'jessiepp123', u'hi jake.']
IO - speech.speak (20:33:30.818):
Speaking [IndexCommand(10), LangChangeCommand (u'en_CA'), u'Send a message  edit  multi line', u'out of edit']
IO - speech.speak (20:33:30.832):
Speaking [IndexCommand(11), LangChangeCommand (u'en_CA'), u'button', u'Emote picker']
IO - inputCore.InputManager.executeGesture (20:33:30.970):
Input: kb(laptop):shift+f
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:30.984):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:30.986):
Cancelled, stopped pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:30.987):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:30.989):
Queue empty, done processing
DEBUG - queueHandler.registerGeneratorObject (20:33:31.000):
Adding generator 9
IO - speech.speak (20:33:31.009):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'masterjake00', u'I like your plan jessie.']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:31.016):
Begin processing speech
IO - speech.speak (20:33:31.055):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(3), u'button', u'masterjake00', u"Mmm, they'd be all nicely roasted too."]
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:31.059):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:31.059):
Begin processing speech
IO - speech.speak (20:33:31.085):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(5), u'button', u'masterjake00', u'Ale can you hear my messages?']
IO - speech.speak (20:33:31.135):
Speaking [IndexCommand(6), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(7), u'button', u'masterjake00', u'Alex']
IO - speech.speak (20:33:31.145):
Speaking [IndexCommand(8), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(9), u'button', u'masterjake00', u'Nope.']
IO - speech.speak (20:33:31.181):
Speaking [IndexCommand(10), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(11), u'button', u'jessiepp123', u'hi jake.']
IO - inputCore.InputManager.executeGesture (20:33:31.194):
Input: kb(laptop):shift+f
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:31.203):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:31.207):
Cancelled, stopped pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:31.207):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:31.207):
Queue empty, done processing
DEBUG - queueHandler.registerGeneratorObject (20:33:31.217):
Adding generator 10
IO - speech.speak (20:33:31.242):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'masterjake00', u'Okay go']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:31.247):
Begin processing speech
IO - speech.speak (20:33:31.270):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(3), u'button', u'masterjake00', u'I like your plan jessie.']
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:31.289):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:31.289):
Begin processing speech
IO - speech.speak (20:33:31.302):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(5), u'button', u'masterjake00', u"Mmm, they'd be all nicely roasted too."]
IO - speech.speak (20:33:31.332):
Speaking [IndexCommand(6), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(7), u'button', u'masterjake00', u'Ale can you hear my messages?']
IO - speech.speak (20:33:31.384):
Speaking [IndexCommand(8), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(9), u'button', u'masterjake00', u'Alex']
IO - speech.speak (20:33:31.395):
Speaking [IndexCommand(10), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(11), u'button', u'masterjake00', u'Nope.']
IO - inputCore.InputManager.executeGesture (20:33:31.405):
Input: kb(laptop):shift+f
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:31.415):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:31.417):
Cancelled, stopped pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:31.418):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:31.420):
Queue empty, done processing
DEBUG - queueHandler.registerGeneratorObject (20:33:31.433):
Adding generator 11
IO - speech.speak (20:33:31.460):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'masterjake00', u'Jessie Hold']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:31.467):
Begin processing speech
IO - speech.speak (20:33:31.509):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(3), u'button', u'masterjake00', u'Okay go']
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:31.510):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:31.510):
Calling idle on audio player
IO - speech.speak (20:33:31.519):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(5), u'button', u'masterjake00', u'I like your plan jessie.']
IO - speech.speak (20:33:31.553):
Speaking [IndexCommand(6), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(7), u'button', u'masterjake00', u"Mmm, they'd be all nicely roasted too."]
IO - speech.speak (20:33:31.582):
Speaking [IndexCommand(8), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(9), u'button', u'masterjake00', u'Ale can you hear my messages?']
IO - speech.speak (20:33:31.630):
Speaking [IndexCommand(10), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(11), u'button', u'masterjake00', u'Alex']
IO - inputCore.InputManager.executeGesture (20:33:31.842):
Input: kb(laptop):shift+f
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:31.844):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:31.845):
Queue empty, done processing
DEBUG - queueHandler.registerGeneratorObject (20:33:31.857):
Adding generator 12
IO - speech.speak (20:33:31.884):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'masterjake00', u'Hold jessie']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:31.891):
Begin processing speech
IO - speech.speak (20:33:31.927):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(3), u'button', u'masterjake00', u'Jessie Hold']
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:31.928):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:31.930):
Begin processing speech
IO - speech.speak (20:33:31.957):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(5), u'button', u'masterjake00', u'Okay go']
IO - speech.speak (20:33:31.976):
Speaking [IndexCommand(6), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(7), u'button', u'masterjake00', u'I like your plan jessie.']
IO - speech.speak (20:33:32.003):
Speaking [IndexCommand(8), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(9), u'button', u'masterjake00', u"Mmm, they'd be all nicely roasted too."]
IO - inputCore.InputManager.executeGesture (20:33:32.032):
Input: kb(laptop):shift+f
IO - speech.speak (20:33:32.039):
Speaking [IndexCommand(10), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(11), u'button', u'masterjake00', u'Ale can you hear my messages?']
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:32.042):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:32.043):
Cancelled, stopped pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:32.045):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:32.051):
Queue empty, done processing
DEBUG - queueHandler.registerGeneratorObject (20:33:32.065):
Adding generator 13
IO - speech.speak (20:33:32.071):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'masterjake00', u'Holy shit.']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:32.076):
Begin processing speech
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:32.118):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:32.118):
Calling idle on audio player
IO - speech.speak (20:33:32.134):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(3), u'button', u'masterjake00', u'Hold jessie']
IO - speech.speak (20:33:32.165):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(5), u'button', u'masterjake00', u'Jessie Hold']
IO - speech.speak (20:33:32.194):
Speaking [IndexCommand(6), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(7), u'button', u'masterjake00', u'Okay go']
IO - speech.speak (20:33:32.207):
Speaking [IndexCommand(8), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(9), u'button', u'masterjake00', u'I like your plan jessie.']
IO - inputCore.InputManager.executeGesture (20:33:32.233):
Input: kb(laptop):shift+f
IO - speech.speak (20:33:32.239):
Speaking [IndexCommand(10), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(11), u'button', u'masterjake00', u"Mmm, they'd be all nicely roasted too."]
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:32.240):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:32.243):
Queue empty, done processing
DEBUG - queueHandler.registerGeneratorObject (20:33:32.255):
Adding generator 14
IO - speech.speak (20:33:32.269):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'masterjake00', u'Hair straightener']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:32.276):
Begin processing speech
IO - speech.speak (20:33:32.285):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(3), u'button', u'masterjake00', u'Holy shit.']
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:32.319):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:32.319):
Begin processing speech
IO - speech.speak (20:33:32.332):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(5), u'button', u'masterjake00', u'Hold jessie']
IO - speech.speak (20:33:32.365):
Speaking [IndexCommand(6), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(7), u'button', u'masterjake00', u'Jessie Hold']
IO - speech.speak (20:33:32.395):
Speaking [IndexCommand(8), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(9), u'button', u'masterjake00', u'Okay go']
IO - speech.speak (20:33:32.411):
Speaking [IndexCommand(10), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(11), u'button', u'masterjake00', u'I like your plan jessie.']
IO - inputCore.InputManager.executeGesture (20:33:32.428):
Input: kb(laptop):shift+f
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:32.438):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:32.440):
Cancelled, stopped pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:32.441):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:32.441):
Queue empty, done processing
DEBUG - queueHandler.registerGeneratorObject (20:33:32.453):
Adding generator 15
IO - speech.speak (20:33:32.459):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'masterjake00', u'I like KFC better.']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:32.466):
Begin processing speech
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:32.509):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:32.509):
Calling idle on audio player
IO - speech.speak (20:33:32.512):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(3), u'button', u'masterjake00', u'Hair straightener']
IO - speech.speak (20:33:32.520):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(5), u'button', u'masterjake00', u'Holy shit.']
IO - speech.speak (20:33:32.566):
Speaking [IndexCommand(6), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(7), u'button', u'masterjake00', u'Hold jessie']
IO - speech.speak (20:33:32.598):
Speaking [IndexCommand(8), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(9), u'button', u'masterjake00', u'Jessie Hold']
IO - inputCore.InputManager.executeGesture (20:33:32.634):
Input: kb(laptop):shift+f
IO - speech.speak (20:33:32.635):
Speaking [IndexCommand(10), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(11), u'button', u'masterjake00', u'Okay go']
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:32.638):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:32.640):
Queue empty, done processing
DEBUG - queueHandler.registerGeneratorObject (20:33:32.651):
Adding generator 16
IO - speech.speak (20:33:32.663):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'masterjake00', u'Burning hair is awful.']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:32.671):
Begin processing speech
IO - speech.speak (20:33:32.707):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(3), u'button', u'masterjake00', u'I like KFC better.']
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:32.720):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:32.720):
Begin processing speech
IO - speech.speak (20:33:32.753):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(5), u'button', u'masterjake00', u'Hair straightener']
IO - speech.speak (20:33:32.776):
Speaking [IndexCommand(6), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(7), u'button', u'masterjake00', u'Holy shit.']
IO - speech.speak (20:33:32.818):
Speaking [IndexCommand(8), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(9), u'button', u'masterjake00', u'Hold jessie']
IO - inputCore.InputManager.executeGesture (20:33:32.819):
Input: kb(laptop):shift+f
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:32.832):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:32.835):
Cancelled, stopped pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:32.835):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:32.836):
Queue empty, done processing
DEBUG - queueHandler.registerGeneratorObject (20:33:32.848):
Adding generator 17
IO - speech.speak (20:33:32.855):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'masterjake00', u'It smells like KFC.']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:32.861):
Begin processing speech
IO - speech.speak (20:33:32.895):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(3), u'button', u'masterjake00', u'Burning hair is awful.']
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:32.908):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:32.910):
Begin processing speech
IO - speech.speak (20:33:32.928):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(5), u'button', u'masterjake00', u'I like KFC better.']
IO - speech.speak (20:33:32.973):
Speaking [IndexCommand(6), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(7), u'button', u'masterjake00', u'Hair straightener']
IO - speech.speak (20:33:32.990):
Speaking [IndexCommand(8), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(9), u'button', u'masterjake00', u'Holy shit.']
IO - inputCore.InputManager.executeGesture (20:33:33.012):
Input: kb(laptop):shift+f
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:33.013):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:33.016):
Cancelled, stopped pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:33.016):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:33.033):
Queue empty, done processing
DEBUG - queueHandler.registerGeneratorObject (20:33:33.046):
Adding generator 18
IO - speech.speak (20:33:33.066):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'masterjake00', u"Yes, that's because of the engine bleed air system."]
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:33.072):
Begin processing speech
IO - speech.speak (20:33:33.098):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(3), u'button', u'masterjake00', u'It smells like KFC.']
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:33.128):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:33.130):
Begin processing speech
IO - speech.speak (20:33:33.131):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(5), u'button', u'masterjake00', u'Burning hair is awful.']
IO - speech.speak (20:33:33.165):
Speaking [IndexCommand(6), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(7), u'button', u'masterjake00', u'I like KFC better.']
IO - inputCore.InputManager.executeGesture (20:33:33.207):
Input: kb(laptop):shift+f
IO - speech.speak (20:33:33.210):
Speaking [IndexCommand(8), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(9), u'button', u'masterjake00', u'Hair straightener']
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:33.213):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:33.214):
Cancelled, stopped pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:33.214):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:33.216):
Queue empty, done processing
DEBUG - queueHandler.registerGeneratorObject (20:33:33.229):
Adding generator 19
IO - speech.speak (20:33:33.239):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'masterjake00', u'And the cabin.']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:33.244):
Begin processing speech
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:33.289):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:33.289):
Calling idle on audio player
IO - speech.speak (20:33:33.293):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(3), u'button', u'masterjake00', u"Yes, that's because of the engine bleed air system."]
IO - speech.speak (20:33:33.318):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(5), u'button', u'masterjake00', u'It smells like KFC.']
IO - speech.speak (20:33:33.346):
Speaking [IndexCommand(6), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(7), u'button', u'masterjake00', u'Burning hair is awful.']
IO - speech.speak (20:33:33.384):
Speaking [IndexCommand(8), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(9), u'button', u'masterjake00', u'I like KFC better.']
IO - inputCore.InputManager.executeGesture (20:33:33.421):
Input: kb(laptop):shift+f
IO - speech.speak (20:33:33.430):
Speaking [IndexCommand(10), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(11), u'button', u'masterjake00', u'Hair straightener']
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:33.430):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:33.434):
Queue empty, done processing
DEBUG - queueHandler.registerGeneratorObject (20:33:33.447):
Adding generator 20
IO - speech.speak (20:33:33.473):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'masterjake00', u"Hey, if you injest a bird into the engine and it goes through the core you'll get the ", IndexCommand(2), u'smell of KFC in the cockpit.']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:33.482):
Begin processing speech
IO - speech.speak (20:33:33.506):
Speaking [IndexCommand(3), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(4), u'button', u'masterjake00', u'And the cabin.']
IO - speech.speak (20:33:33.540):
Speaking [IndexCommand(5), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(6), u'button', u'masterjake00', u"Yes, that's because of the engine bleed air system."]
IO - speech.speak (20:33:33.566):
Speaking [IndexCommand(7), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(8), u'button', u'masterjake00', u'It smells like KFC.']
IO - speech.speak (20:33:33.598):
Speaking [IndexCommand(9), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(10), u'button', u'masterjake00', u'Burning hair is awful.']
IO - inputCore.InputManager.executeGesture (20:33:33.618):
Input: kb(laptop):shift+f
IO - speech.speak (20:33:33.637):
Speaking [IndexCommand(11), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(12), u'button', u'masterjake00', u'I like KFC better.']
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:33.638):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:33.641):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:33.641):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:33.641):
Queue empty, done processing
DEBUG - queueHandler.registerGeneratorObject (20:33:33.657):
Adding generator 21
IO - speech.speak (20:33:33.678):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'masterjake00', u'Oh god']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:33.686):
Begin processing speech
IO - speech.speak (20:33:33.723):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(3), u'button', u'masterjake00', u"Hey, if you injest a bird into the engine and it goes through the core you'll get the ", IndexCommand(4), u'smell of KFC in the cockpit.']
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:33.729):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:33.729):
Begin processing speech
IO - speech.speak (20:33:33.759):
Speaking [IndexCommand(5), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(6), u'button', u'masterjake00', u'And the cabin.']
IO - speech.speak (20:33:33.790):
Speaking [IndexCommand(7), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(8), u'button', u'masterjake00', u"Yes, that's because of the engine bleed air system."]
IO - speech.speak (20:33:33.819):
Speaking [IndexCommand(9), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(10), u'button', u'masterjake00', u'It smells like KFC.']
IO - inputCore.InputManager.executeGesture (20:33:33.825):
Input: kb(laptop):shift+f
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:33.832):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:33.835):
Cancelled, stopped pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:33.835):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:33.836):
Queue empty, done processing
DEBUG - queueHandler.registerGeneratorObject (20:33:33.854):
Adding generator 22
IO - speech.speak (20:33:33.859):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'masterjake00', u'The higher one please.']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:33.865):
Begin processing speech
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:33.910):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:33.910):
Calling idle on audio player
IO - speech.speak (20:33:33.917):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(3), u'button', u'masterjake00', u'Oh god']
IO - speech.speak (20:33:33.940):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(5), u'button', u'masterjake00', u"Hey, if you injest a bird into the engine and it goes through the core you'll get the ", IndexCommand(6), u'smell of KFC in the cockpit.']
IO - speech.speak (20:33:33.973):
Speaking [IndexCommand(7), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(8), u'button', u'masterjake00', u'And the cabin.']
IO - speech.speak (20:33:34.010):
Speaking [IndexCommand(9), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(10), u'button', u'masterjake00', u"Yes, that's because of the engine bleed air system."]
IO - speech.speak (20:33:34.040):
Speaking [IndexCommand(11), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(12), u'button', u'masterjake00', u'It smells like KFC.']
IO - inputCore.InputManager.executeGesture (20:33:34.088):
Input: kb(laptop):shift+e
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:34.094):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:34.096):
Queue empty, done processing
IO - speech.speak (20:33:34.101):
Speaking [LangChangeCommand (u'en_CA'), u'no previous edit field']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:34.108):
Begin processing speech
DEBUG - queueHandler.registerGeneratorObject (20:33:34.109):
Adding generator 23
IO - speech.speak (20:33:34.115):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'masterjake00', u'The higher one please.']
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:34.118):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:34.118):
Begin processing speech
IO - speech.speak (20:33:34.161):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(3), u'button', u'masterjake00', u'Oh god']
IO - speech.speak (20:33:34.194):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(5), u'button', u'masterjake00', u"Hey, if you injest a bird into the engine and it goes through the core you'll get the ", IndexCommand(6), u'smell of KFC in the cockpit.']
IO - speech.speak (20:33:34.223):
Speaking [IndexCommand(7), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(8), u'button', u'masterjake00', u'And the cabin.']
IO - speech.speak (20:33:34.255):
Speaking [IndexCommand(9), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(10), u'button', u'masterjake00', u"Yes, that's because of the engine bleed air system."]
IO - speech.speak (20:33:34.289):
Speaking [IndexCommand(11), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(12), u'button', u'masterjake00', u'It smells like KFC.']
IO - inputCore.InputManager.executeGesture (20:33:34.747):
Input: kb(laptop):shift+e
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:34.756):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:34.759):
Cancelled, stopped pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:34.759):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:34.759):
Queue empty, done processing
IO - speech.speak (20:33:34.766):
Speaking [LangChangeCommand (u'en_CA'), u'no previous edit field']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:34.773):
Begin processing speech
DEBUG - queueHandler.registerGeneratorObject (20:33:34.773):
Adding generator 24
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:34.785):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:34.785):
Calling idle on audio player
IO - speech.speak (20:33:34.786):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'masterjake00', u'The higher one please.']
IO - speech.speak (20:33:34.834):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(3), u'button', u'masterjake00', u'Oh god']
IO - speech.speak (20:33:34.865):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(5), u'button', u'masterjake00', u"Hey, if you injest a bird into the engine and it goes through the core you'll get the ", IndexCommand(6), u'smell of KFC in the cockpit.']
IO - speech.speak (20:33:34.894):
Speaking [IndexCommand(7), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(8), u'button', u'masterjake00', u'And the cabin.']
IO - speech.speak (20:33:34.930):
Speaking [IndexCommand(9), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(10), u'button', u'masterjake00', u"Yes, that's because of the engine bleed air system."]
IO - speech.speak (20:33:34.959):
Speaking [IndexCommand(11), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(12), u'button', u'masterjake00', u'It smells like KFC.']
IO - inputCore.InputManager.executeGesture (20:33:35.336):
Input: kb(laptop):shift+f
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:35.342):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:35.344):
Queue empty, done processing
DEBUG - queueHandler.registerGeneratorObject (20:33:35.355):
Adding generator 25
IO - speech.speak (20:33:35.365):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'masterjake00', u'LOL what level would you like?']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:35.372):
Begin processing speech
IO - speech.speak (20:33:35.398):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(3), u'button', u'masterjake00', u'The higher one please.']
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:35.418):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:35.418):
Begin processing speech
IO - speech.speak (20:33:35.441):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(5), u'button', u'masterjake00', u'Oh god']
IO - speech.speak (20:33:35.473):
Speaking [IndexCommand(6), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(7), u'button', u'masterjake00', u"Hey, if you injest a bird into the engine and it goes through the core you'll get the ", IndexCommand(8), u'smell of KFC in the cockpit.']
IO - speech.speak (20:33:35.505):
Speaking [IndexCommand(9), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(10), u'button', u'masterjake00', u'And the cabin.']
IO - speech.speak (20:33:35.540):
Speaking [IndexCommand(11), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(12), u'button', u'masterjake00', u"Yes, that's because of the engine bleed air system."]
IO - inputCore.InputManager.executeGesture (20:33:35.618):
Input: kb(laptop):shift+f
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:35.631):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:35.634):
Cancelled, stopped pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:35.634):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:35.634):
Queue empty, done processing
DEBUG - queueHandler.registerGeneratorObject (20:33:35.645):
Adding generator 26
IO - speech.speak (20:33:35.651):
Speaking [IndexCommand(1), LangChangeCommand (u'en_CA'), u'button', u'masterjake00', u"I wasn't paying attention to what Alex was saying."]
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:35.657):
Begin processing speech
IO - speech.speak (20:33:35.691):
Speaking [IndexCommand(2), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(3), u'button', u'masterjake00', u'LOL what level would you like?']
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:35.710):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:35.710):
Begin processing speech
IO - speech.speak (20:33:35.723):
Speaking [IndexCommand(4), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(5), u'button', u'masterjake00', u'The higher one please.']
IO - speech.speak (20:33:35.775):
Speaking [IndexCommand(6), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(7), u'button', u'masterjake00', u'Oh god']
IO - speech.speak (20:33:35.801):
Speaking [IndexCommand(8), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(9), u'button', u'masterjake00', u"Hey, if you injest a bird into the engine and it goes through the core you'll get the ", IndexCommand(10), u'smell of KFC in the cockpit.']
IO - speech.speak (20:33:35.834):
Speaking [IndexCommand(11), LangChangeCommand (u'en_CA'), u'graphic', u'Moderator badge', IndexCommand(12), u'button', u'masterjake00', u'And the cabin.']
IO - inputCore.InputManager.executeGesture (20:33:35.986):
Input: kb(laptop):shift+tab
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:36.006):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:36.009):
Cancelled, stopped pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:36.009):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:36.009):
Queue empty, done processing
IO - speech.speak (20:33:36.190):
Speaking [LangChangeCommand (u'en_CA'), u'masterjake00', u'button']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:36.198):
Begin processing speech
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:36.210):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:36.210):
Calling idle on audio player
IO - inputCore.InputManager.executeGesture (20:33:36.588):
Input: kb(laptop):shift+tab
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:36.595):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:36.596):
Queue empty, done processing
IO - speech.speak (20:33:36.772):
Speaking [LangChangeCommand (u'en_CA'), u'masterjake00', u'button']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:36.779):
Begin processing speech
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:36.792):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:36.792):
Calling idle on audio player
IO - inputCore.InputManager.executeGesture (20:33:36.848):
Input: kb(laptop):shift+tab
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:36.861):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:36.865):
Queue empty, done processing
IO - speech.speak (20:33:37.038):
Speaking [LangChangeCommand (u'en_CA'), u'masterjake00', u'button']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:37.045):
Begin processing speech
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:37.058):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:37.058):
Calling idle on audio player
IO - inputCore.InputManager.executeGesture (20:33:37.676):
Input: kb(laptop):shift+tab
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:37.687):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:37.690):
Queue empty, done processing
IO - speech.speak (20:33:37.875):
Speaking [LangChangeCommand (u'en_CA'), u'masterjake00', u'button']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:37.882):
Begin processing speech
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:37.894):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:37.894):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:38.361):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:38.365):
Queue empty, done processing
IO - inputCore.InputManager.executeGesture (20:33:38.502):
Input: kb(laptop):shift+NVDA+space
IO - speech.speak (20:33:38.505):
Speaking [LangChangeCommand (u'en_CA'), u'Single letter navigation off']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:38.510):
Begin processing speech
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:38.522):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:38.522):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:39.401):
Queue empty, done processing
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:39.548):
Cancelling
IO - inputCore.InputManager.executeGesture (20:33:39.687):
Input: kb(laptop):shift+NVDA+space
IO - speech.speak (20:33:39.704):
Speaking [LangChangeCommand (u'en_CA'), u'Single letter navigation on']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:39.710):
Begin processing speech
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:39.721):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:39.721):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:40.569):
Queue empty, done processing
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:43.344):
Cancelling
IO - inputCore.InputManager.executeGesture (20:33:43.474):
Input: kb(laptop):windows+shift+r
IO - speech.speak (20:33:43.611):
Speaking [LangChangeCommand (u'en_CA'), u'Run  dialog  Type the name of a program, folder, document, or Internet resource, and Windows will open it for you.']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:43.621):
Begin processing speech
IO - speech.speak (20:33:43.624):
Speaking [LangChangeCommand (u'en_CA'), u'Open:  combo box collapsed']
IO - speech.speak (20:33:43.625):
Speaking [LangChangeCommand (u'en_CA'), u'edit  Alt+o']
IO - speech.speak (20:33:43.627):
Speaking [LangChangeCommand (u'en_CA'), u'selected nvda -r']
DEBUGWARNING - Python warning (20:33:43.628):
C:\Program Files (x86)\NVDA\library.zip\api.py:274: DeprecationWarning: Yield() is deprecated
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:43.657):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:43.657):
Begin processing speech
IO - inputCore.InputManager.executeGesture (20:33:44.223):
Input: kb(laptop):shift+n
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:44.236):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:44.237):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:44.237):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:44.239):
Queue empty, done processing
IO - speech.speak (20:33:44.250):
Speaking [LangChangeCommand (u'en_CA'), u'selection removed']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:44.256):
Begin processing speech
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:44.265):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:44.265):
Calling idle on audio player
IO - inputCore.InputManager.executeGesture (20:33:44.349):
Input: kb(laptop):shift+v
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:44.358):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:44.361):
Queue empty, done processing
IO - inputCore.InputManager.executeGesture (20:33:44.509):
Input: kb(laptop):shift+d
IO - inputCore.InputManager.executeGesture (20:33:44.641):
Input: kb(laptop):shift+a
IO - inputCore.InputManager.executeGesture (20:33:44.792):
Input: kb(laptop):shift+space
IO - speech.speakTypedCharacters (20:33:44.798):
typed word: vda
IO - speech.speak (20:33:44.798):
Speaking [LangChangeCommand (u'en_CA'), u'vda']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:44.803):
Begin processing speech
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:44.809):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:44.809):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:45.190):
Queue empty, done processing
IO - inputCore.InputManager.executeGesture (20:33:45.361):
Input: kb(laptop):shift+-
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:45.381):
Cancelling
IO - inputCore.InputManager.executeGesture (20:33:45.503):
Input: kb(laptop):shift+r
IO - inputCore.InputManager.executeGesture (20:33:45.627):
Input: kb(laptop):shift+enter
DEBUGWARNING - NVDAObjects.IAccessible.IAccessible._get_IAccessibleRole (20:33:45.648):
accRole failed: (-2147024809, 'The parameter is incorrect.', (None, None, None, 0, None))
IO - speech.speak (20:33:45.668):
Speaking [LangChangeCommand (u'en_CA'), u'text  unavailable']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:45.676):
Begin processing speech
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:45.684):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:45.684):
Calling idle on audio player
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:45.770):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:45.773):
Queue empty, done processing
IO - speech.speak (20:33:45.778):
Speaking [LangChangeCommand (u'en_CA'), u'FolderView  list']
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:45.783):
Begin processing speech
IO - speech.speak (20:33:45.786):
Speaking [LangChangeCommand (u'en_CA'), u'Navigraph FMS Data Manager  30 of 64']
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:45.792):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:45.792):
Begin processing speech
INFO - core.main (20:33:45.796):
Exiting
DEBUG - core._terminate (20:33:45.796):
Terminating updateCheck
DEBUG - core._terminate (20:33:45.796):
Terminating watchdog
DEBUG - core._terminate (20:33:45.796):
Terminating global plugin handler
DEBUG - core._terminate (20:33:45.947):
Terminating gui
DEBUG - driverHandler.Driver.saveSettings (20:33:45.976):
Saved settings for SynthDriver oneCore
DEBUG - fileUtils.FaultTolerantFile (20:33:45.976):
C:\Users\Sarah\AppData\Roaming\nvda\nvda.inituuuhz.tmp
INFO - config.ConfigManager.save (20:33:45.982):
Base configuration saved
DEBUG - synthDrivers.oneCore.SynthDriver.cancel (20:33:45.983):
Cancelling
DEBUG - synthDrivers.oneCore.SynthDriver._callback (20:33:45.984):
Done pushing audio
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:45.986):
Calling idle on audio player
DEBUG - core._terminate (20:33:45.986):
Terminating treeInterceptorHandler
DEBUG - synthDrivers.oneCore.SynthDriver._processQueue (20:33:45.986):
Queue empty, done processing
DEBUG - treeInterceptorHandler.killTreeInterceptor (20:33:45.990):
Killed treeInterceptor: <NVDAObjects.IAccessible.chromium.ChromeVBuf object at 0x0556F9B0>
DEBUG - core._terminate (20:33:45.993):
Terminating IAccessible support
DEBUG - core._terminate (20:33:45.993):
Terminating UIA support
DEBUG - core._terminate (20:33:46.010):
Terminating Legacy winConsole support
DEBUG - core._terminate (20:33:46.010):
Terminating Java Access Bridge support
DEBUG - core._terminate (20:33:46.010):
Terminating app module handler
DEBUG - core._terminate (20:33:46.010):
Terminating NVDAHelper
DEBUG - core._terminate (20:33:46.013):
Terminating touchHandler
DEBUG - core._terminate (20:33:46.013):
Terminating keyboard handler
DEBUG - core._terminate (20:33:46.013):
Terminating mouseHandler
DEBUG - core._terminate (20:33:46.015):
Terminating inputCore
DEBUG - core._terminate (20:33:46.015):
Terminating brailleInput
DEBUG - core._terminate (20:33:46.015):
Terminating braille
DEBUG - core._terminate (20:33:46.016):
Terminating speech
DEBUG - driverHandler.Driver.saveSettings (20:33:46.016):
Saved settings for SynthDriver oneCore
DEBUG - core._terminate (20:33:46.020):
Terminating addonHandler
DEBUG - core.main (20:33:47.081):
core done
INFO - __main__ (20:33:48.838):
NVDA exit

On 2/1/2020 7:46 PM, Tyler Spivey wrote:

It looks like your NVDA key got stuck. Does it fix itself if you just press and release it?

The log wasn't useful because it wasn't at the right level.

Usually if some modifier gets stuck, I just press all of them and it fixes itself. It happens to me with virtual machines all the time. Shouldn't happen with Discord though.


On 2/1/2020 6:50 PM, Sarah k Alawami wrote:

Hello to all, NVDA just twice in the last 5 minutes lost control of its keys. I was in discord and suddenly my keys just won't working right. I would hit shift space and I would hear "single letter nav on" etc. I'm running 19.2 stable and latest. Here is the old log file I got before I restarted nvda.


INFO - __main__ (18:45:15.907):
Starting NVDA
INFO - core.main (18:45:17.467):
Config dir: C:\Users\Sarah\AppData\Roaming\nvda
INFO - config.ConfigManager._loadConfig (18:45:17.467):
Loading config: C:\Users\Sarah\AppData\Roaming\nvda\nvda.ini
INFO - core.main (18:45:17.566):
NVDA version 2019.2.1
INFO - core.main (18:45:17.566):
Using Windows version 10.0.18363 workstation
INFO - core.main (18:45:17.566):
Using Python version 2.7.16 (v2.7.16:413a49145e, Mar  4 2019, 01:30:55) [MSC v.1500 32 bit (Intel)]
INFO - core.main (18:45:17.566):
Using comtypes version 1.1.7
INFO - core.main (18:45:17.566):
Using configobj version 5.1.0 with validate version 1.0.1
INFO - synthDriverHandler.setSynth (18:45:18.009):
Loaded synthDriver oneCore
INFO - core.main (18:45:18.211):
Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5
INFO - brailleInput.initialize (18:45:18.213):
Braille input initialized
INFO - braille.initialize (18:45:18.214):
Using liblouis version 3.10.0
INFO - braille.BrailleHandler.setDisplayByName (18:45:18.217):
Loaded braille display driver noBraille, current display has 0 cells.
WARNING - core.main (18:45:18.249):
Java Access Bridge not available
INFO - _UIAHandler.UIAHandler.MTAThreadFunc (18:45:18.260):
UIAutomation: IUIAutomation6
INFO - external:globalPlugins.translate.GlobalPlugin.__init__ (18:45:22.362):
Translate module initialized, translating to en
INFO - core.main (18:45:22.539):
NVDA initialized
INFO - core.main (18:47:02.174):
Exiting
INFO - config.ConfigManager.save (18:47:02.368):
Base configuration saved
INFO - __main__ (18:47:05.082):
NVDA exit


Can any one advise? I know this has ben an issue for a while.


Tc and be blessed.
15721 - 15740 of 85111