Date   

Re: Copy Command Not Echoed

Gene
 

Is it updated, or will it be, for the new forthcoming NVDA version?  The Clipspeak page doesn't show anything for a new version under development and the compatibility information says:
2018.3 to 2019.3.
 
What does that mean?  Does that mean the add-on doesn't need any additional work to remain compatible with the soon to be released version of NVDA?
Gene

----- Original Message -----
Sent: Monday, February 03, 2020 6:31 PM
Subject: Re: [nvda] Copy Command Not Echoed

You can install The add-on Clip speak.


On Feb 3, 2020, at 7:29 PM, Glenn / Lenny <glennervin@...> wrote:



Hi All,
Although I too find this to be an annoyance, a friend of mine is constantly bothered by it, so he asked me to see if there is a work-around for this.
This is of course, when you do control + C, it says nothing, and you don't really know if your text was copied until you try pasting it elsewhere.
Is there an add-on or a way to make this speak when something gets put into the clipboard?
Thanks.
 
Glenn


Re: can't read the what's new from the help menu

Quentin Christensen
 

Glad you got it working.  Do let us know if you have any issues with the RC itself.


On Tue, Feb 4, 2020 at 11:30 AM Bobby Vinton <vinton.bobby5277@...> wrote:

Well I got it to work by telling windows what browser to use.  Some times windows doesn't know your default browser.  I want to thank every one on this list for all your help.  Every one was correct.

On 2/3/2020 4:25 PM, Gene wrote:
What happens when you follow a link in an e-mail or type an Internet address in the run dialog and open a web page in that way?  I have always found that help information in NVDA opens using the default browser.  If previous versions of NVDA work properly in this respecgt and this one doesn’t, then there may be a problem with what NVDA does.  If not, and if other things I’ve discussed don’t work properly, then there is a ;problem with Windows not knowing which browser is the default.
 
Gene
----- Original Message -----
Sent: Monday, February 03, 2020 2:14 PM
Subject: Re: [nvda] can't read the what's new from the help menu
 
Hi


Is it associated with the browser or a browser.


What may happen is when you go into the whats new section you might have
to tell it what browser to use and check the box so it does it from then on.


Gene nz


On 4/02/2020 7:31 am, Bobby Vinton wrote:
> Hay I am running nvda 2019 rc 2 and when I try to read the what's new
> with the help menu nvda will just go back to the desk top and not read
> the what's new at all.  I was wondering when you will have this bug
> fixed or did any one know about the issue?
>
>
>
>




--
Quentin Christensen
Training and Support Manager


Re: NVDA 2019.3 RC 2 is released

Quentin Christensen
 

Thanks Rosemarie!


On Tue, Feb 4, 2020 at 9:07 AM Rosemarie Chavarria <knitqueen2007@...> wrote:

Hi, Quentin,

 

I just downloaded it and it's working great so-far.

 

Rosemarie

 

 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Quentin Christensen
Sent: Monday, February 3, 2020 1:51 PM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA 2019.3 RC 2 is released

 

Hi everyone,

 

The release candidate (RC) build of NVDA 2019.3 is now available for testing.  We encourage all users to download this RC and provide feedback. This is a release candidate for NVDA 2019.3. Unless any critical bugs are found, this will be identical to the final 2019.3 release.

 

More information and download link is available from: https://www.nvaccess.org/post/nvda-2019-3rc2-now-available-for-testing/  

 

--

Quentin Christensen
Training and Support Manager

 



--
Quentin Christensen
Training and Support Manager


Re: Copy Command Not Echoed

 

Yes:  https://addons.nvda-project.org/addons/clipspeak.en.html

I would also suggest that when people want to know whether there's an NVDA add-on that they might want to look at the NVDA Add-Ons Page to find out - FIRST.  That's why it exists.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Power is being told you're not loved and not being destroyed by it.

       ~ Madonna

 

 


Re: Copy Command Not Echoed

Cecelia Rodriguez <cessbraille@...>
 

You can install The add-on Clip speak.


On Feb 3, 2020, at 7:29 PM, Glenn / Lenny <glennervin@...> wrote:



Hi All,
Although I too find this to be an annoyance, a friend of mine is constantly bothered by it, so he asked me to see if there is a work-around for this.
This is of course, when you do control + C, it says nothing, and you don't really know if your text was copied until you try pasting it elsewhere.
Is there an add-on or a way to make this speak when something gets put into the clipboard?
Thanks.
 
Glenn


Accessibility issue with debotnet

William
 

Hi,

        debotnet is an open source software that can configure to enhance the security and privacy of win 10, and can perform some specific tasks that is not straight forward under win 10.

When I use the app  I came across with accessibility issue, and reported to the authoer on github.

However the author stated that /she has no idea on how to address this issue.

I here post the respective issue link, https://github.com/mirinsoft/debotnet/issues/25#issuecomment-581394577


anyone know how to explain to software author on how to fix these accessibility issue.


Re: can't read the what's new from the help menu

Bobby Vinton
 

Well I got it to work by telling windows what browser to use.  Some times windows doesn't know your default browser.  I want to thank every one on this list for all your help.  Every one was correct.

On 2/3/2020 4:25 PM, Gene wrote:
What happens when you follow a link in an e-mail or type an Internet address in the run dialog and open a web page in that way?  I have always found that help information in NVDA opens using the default browser.  If previous versions of NVDA work properly in this respecgt and this one doesn’t, then there may be a problem with what NVDA does.  If not, and if other things I’ve discussed don’t work properly, then there is a ;problem with Windows not knowing which browser is the default.
 
Gene
----- Original Message -----
Sent: Monday, February 03, 2020 2:14 PM
Subject: Re: [nvda] can't read the what's new from the help menu
 
Hi


Is it associated with the browser or a browser.


What may happen is when you go into the whats new section you might have
to tell it what browser to use and check the box so it does it from then on.


Gene nz


On 4/02/2020 7:31 am, Bobby Vinton wrote:
> Hay I am running nvda 2019 rc 2 and when I try to read the what's new
> with the help menu nvda will just go back to the desk top and not read
> the what's new at all.  I was wondering when you will have this bug
> fixed or did any one know about the issue?
>
>
>
>



Copy Command Not Echoed

Glenn / Lenny
 


Hi All,
Although I too find this to be an annoyance, a friend of mine is constantly bothered by it, so he asked me to see if there is a work-around for this.
This is of course, when you do control + C, it says nothing, and you don't really know if your text was copied until you try pasting it elsewhere.
Is there an add-on or a way to make this speak when something gets put into the clipboard?
Thanks.
 
Glenn


Re: can't read the what's new from the help menu

Rosemarie Chavarria
 

It works fine here too. I'm using waterfox.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of ben
Sent: Monday, February 3, 2020 12:51 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] can't read the what's new from the help menu

It works fine here.


The page opens right up in Firefox.


Ben

On 2/3/2020 2:14 PM, hurrikennyandopo ... wrote:
Hi


Is it associated with the browser or a browser.


What may happen is when you go into the whats new section you might
have to tell it what browser to use and check the box so it does it
from then on.


Gene nz


On 4/02/2020 7:31 am, Bobby Vinton wrote:
Hay I am running nvda 2019 rc 2 and when I try to read the what's new
with the help menu nvda will just go back to the desk top and not
read the what's new at all. I was wondering when you will have this
bug fixed or did any one know about the issue?





Re: NVDA 2019.3 RC 2 is released

Sarah k Alawami
 

I just contacted the guys who did win wizard so we'll see if they can make the add on work with nvda 19.3.

Thanks and can't wait to test this, in portable form right now.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.

to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Our discord is where you will know when we go live on [twitch.](twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

Finally, to become a patron and help support the podcast go here

On 3 Feb 2020, at 13:50, Quentin Christensen wrote:

Hi everyone,

The release candidate (RC) build of NVDA 2019.3 is now available for testing.  We encourage all users to download this RC and provide feedback. This is a release candidate for NVDA 2019.3. Unless any critical bugs are found, this will be identical to the final 2019.3 release.

More information and download link is available from: https://www.nvaccess.org/post/nvda-2019-3rc2-now-available-for-testing/  

--
Quentin Christensen
Training and Support Manager


Re: NVDA 2019.3 RC 2 is released

Rosemarie Chavarria
 

Hi, Quentin,

 

I just downloaded it and it's working great so-far.

 

Rosemarie

 

 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Quentin Christensen
Sent: Monday, February 3, 2020 1:51 PM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA 2019.3 RC 2 is released

 

Hi everyone,

 

The release candidate (RC) build of NVDA 2019.3 is now available for testing.  We encourage all users to download this RC and provide feedback. This is a release candidate for NVDA 2019.3. Unless any critical bugs are found, this will be identical to the final 2019.3 release.

 

More information and download link is available from: https://www.nvaccess.org/post/nvda-2019-3rc2-now-available-for-testing/  

 

--

Quentin Christensen
Training and Support Manager

 


NVDA 2019.3 RC 2 is released

Quentin Christensen
 

Hi everyone,

The release candidate (RC) build of NVDA 2019.3 is now available for testing.  We encourage all users to download this RC and provide feedback. This is a release candidate for NVDA 2019.3. Unless any critical bugs are found, this will be identical to the final 2019.3 release.

More information and download link is available from: https://www.nvaccess.org/post/nvda-2019-3rc2-now-available-for-testing/  

--
Quentin Christensen
Training and Support Manager


Re: can't read the what's new from the help menu

Gene
 

What happens when you follow a link in an e-mail or type an Internet address in the run dialog and open a web page in that way?  I have always found that help information in NVDA opens using the default browser.  If previous versions of NVDA work properly in this respecgt and this one doesn’t, then there may be a problem with what NVDA does.  If not, and if other things I’ve discussed don’t work properly, then there is a ;problem with Windows not knowing which browser is the default.
 
Gene

----- Original Message -----
Sent: Monday, February 03, 2020 2:14 PM
Subject: Re: [nvda] can't read the what's new from the help menu
 
Hi


Is it associated with the browser or a browser.


What may happen is when you go into the whats new section you might have
to tell it what browser to use and check the box so it does it from then on.


Gene nz


On 4/02/2020 7:31 am, Bobby Vinton wrote:
> Hay I am running nvda 2019 rc 2 and when I try to read the what's new
> with the help menu nvda will just go back to the desk top and not read
> the what's new at all.  I was wondering when you will have this bug
> fixed or did any one know about the issue?
>
>
>
>



Re: can't read the what's new from the help menu

Bobby Vinton
 

Got it to work.  I just ad to tell nvda what browser to use to open the page.  Thank you all very much.  Now every thing is working again.

On 2/3/2020 3:50 PM, ben wrote:
It works fine here.


The page opens right up in Firefox.


Ben

On 2/3/2020 2:14 PM, hurrikennyandopo ... wrote:
Hi


Is it associated with the browser or a browser.


What may happen is when you go into the whats new section you might have to tell it what browser to use and check the box so it does it from then on.


Gene nz


On 4/02/2020 7:31 am, Bobby Vinton wrote:
Hay I am running nvda 2019 rc 2 and when I try to read the what's new with the help menu nvda will just go back to the desk top and not read the what's new at all.  I was wondering when you will have this bug fixed or did any one know about the issue?





Re: can't read the what's new from the help menu

ben <swigjr23@...>
 

It works fine here.


The page opens right up in Firefox.


Ben

On 2/3/2020 2:14 PM, hurrikennyandopo ... wrote:
Hi


Is it associated with the browser or a browser.


What may happen is when you go into the whats new section you might have to tell it what browser to use and check the box so it does it from then on.


Gene nz


On 4/02/2020 7:31 am, Bobby Vinton wrote:
Hay I am running nvda 2019 rc 2 and when I try to read the what's new with the help menu nvda will just go back to the desk top and not read the what's new at all.  I was wondering when you will have this bug fixed or did any one know about the issue?




Re: can't read the what's new from the help menu

hurrikennyandopo ...
 

Hi


Is it associated with the browser or a browser.


What may happen is when you go into the whats new section you might have to tell it what browser to use and check the box so it does it from then on.


Gene nz

On 4/02/2020 7:31 am, Bobby Vinton wrote:
Hay I am running nvda 2019 rc 2 and when I try to read the what's new with the help menu nvda will just go back to the desk top and not read the what's new at all.  I was wondering when you will have this bug fixed or did any one know about the issue?



Re: can't read the what's new from the help menu

Bobby Vinton
 

Sorry I ment nvda 2019.3 rc 2.  I left a fiew words out.

On 2/3/2020 1:31 PM, Bobby Vinton via Groups.Io wrote:
Hay I am running nvda 2019 rc 2 and when I try to read the what's new with the help menu nvda will just go back to the desk top and not read the what's new at all.  I was wondering when you will have this bug fixed or did any one know about the issue?



can't read the what's new from the help menu

Bobby Vinton
 

Hay I am running nvda 2019 rc 2 and when I try to read the what's new with the help menu nvda will just go back to the desk top and not read the what's new at all.  I was wondering when you will have this bug fixed or did any one know about the issue?


Joseph Lee's add-ons and NVDA 2019.3: release schedule for next add-on releases in preparation for 2019.3 stable

 

Hi all,

 

NVDA 2019.3 RC (release candidate) was declared, one of the final betas that will be identical to upcoming NVDA 2019.3 stable release unless critical issues emerge. Therefore I hereby announce the schedule for add-on releases from me that are NVDA 2019.3 compatible (or requires NVDA 2019.3):

 

  • Add-on Updater: version 20.02 will hit the air tomorrow. This is a mandatory update for all Add-on Updater users. Feature set is identical to latest version with localization updates and makes provision to support future NVDA releases. Also, 20.02.x will be the last version to support NVDA 2019.2.1 – a March release will require support for 2019.3 and later.
  • StationPlaylist and Windows 10 App Essentials: 20.02 release for these add-ons will be made available within 48 hours after 2019.3 stable is released. These add-ons require NVDA 2019.3 to install and function, and starting from 20.02, Windows 10 App Essentials will also require Windows 10 Version 1903 (May 2019 Update/build 18362).

 

As for other add-ons such as Resource Monitor, no 20.02 releases for them at the moment; note that all of them require NVDA 2019.3.

 

Special notice for DictationBridge users: version 1.1, compatible with NVDA 2019.3, will be released by end of this week.

 

Related to this: if you visit community add-ons website and select any of my add-ons, you’ll see a link to download an older release supporting NVDA 2019.2.1 or earlier. These links will be removed 30 days after NVDA 2019.3 stable version is released.

 

Cheers,

Joseph


Re: NVDA 2019.3 and add-ons: status as of 2019.3 beta 4

Richard Wells
 

Joseph and All: Users of the Acapela synthesizer voices will be thrilled to know that they are compatible with NVDA 2019.3. http://www.acapela-nvda.com/get-your-download-here-v1-6/

On 2/2/2020 11:41 PM, Joseph Lee wrote:

Hello NVDA users,

 

What a week it was – two NVDA 2019.3 betas in a span of few days. And you know what this means: another update on add-ons and 2019.3 readiness.

 

The biggest news is that NVDA Remote add-on is one step closer to 2019.3 compatibility. A few days ago, NV Access people sent necessary changes to make the add-on compatible with NVDA 2019.3 to add-on writers, which was subsequently accepted. Although work remains to be done, the add-on is getting ready for 2019.3 users.

 

Also, once NVDA 2019.3 release candidate (RC) is released, expect numerous important announcements from add-ons community on status of various add-ons. These will include another compatibility briefing, along with add-on authors announcing release of NVDA 2019.3 compatible versions of their add-ons or a schedule as to when these versions will appear on stable channel (I myself will announce such information within 24 hours after RC is released). Once 2019.3 RC is released, it will become crucial for users of incompatible add-ons to contact authors about the status of their add-ons, especially add-ons listed as incompatible on community add-ons website (under Announcements, Python 3 announcement page).

 

Thank you.

Cheers,

Joseph

11641 - 11660 of 81044