Date   

locked Re: NVDA and wordpress

 

I am using wordpress.

Now it depends what you want.

I have used 000webhost which is ftp only and you just run and go but updating is a bit of a bumb as it just won't do automatically.

If you are just starting out, sign up and make a free blog on wordpress.com

Then when logging in use www.wordpress.com/wp-admin to get in and m.wordpress.com to write in a more accessible format.

On 13/03/2020 2:01 am, William Wong wrote:
Hi,

I would like to know, are there visually impaired people using wordpress for your site?

Are you using any free webhosting, and any of them are accessible using NVDA?


Thanks,

William



.


Re: Vocaliser Driver Update

Richard Wells
 

Rui: I did get four of the ones I already had downloaded to work. The
question is, if I want to grab more of them, where can I find them? They
don't seem to be at http://vocalizer-nvda.com or https://www.tiflotecnia.net

On 3/12/2020 11:50 AM, Rui Fontes wrote:
The voices add-ons only need to be replaced if they show up in Add-on
manager as incompatible...


If you want, I am available to make a remote session to solve your
problem.


Rui Fontes

Tiflotecnia, Lda.


Às 16:42 de 12/03/2020, Richard Wells escreveu:
Andrea: I got the driver, but I can't get any of the voices to work. Is
there a new link for them as well?

On 3/11/2020 4:29 PM, Andrea Sherry wrote:
This is a direct link to the new driver:
https://www.tiflotecnia.net/Instal/vocalizer_expressive_driver-3.1.1.nvda-addon


Cheers
Andrea




Re: Editing ESpeak-NG Variant Files

hurrikennyandopo ...
 

Hi Bhavya


Have a look for the tweaky file


I have copied the contents of the file into this email. You can open those files with note pad found on your computer.

It will give you a idea of what to do.


##Please note the 2 number signs, or pound signs in this file are for comments to help you to understand what the settings are and how to set them.
## Language sets the language of your voice.  This setting is required for every voice that you make.
##The next line is a setting you can change.  However if you don't know the language codes it may be best to leave the setting as it is.
language variant

## The name setting is the name that will show up in the voice settings in the variant combo box.
##The next line is a setting you can change
name Tweaky

##The formant settings
##  Formant 0 is used to give a low frequency component to the sounds.
## The three numbers are frequency, strength, and Width, in that order.  Please note, the numbers are seperated by a space.
##The next line is a setting you can change
formant 0 100 100 100

# Formants 1,2, and 3 are the standard three formants which define vowels.
##The next 3 lines are settings you can change
formant 1 100 100 100
formant 2 100 100 100
formant 3 200 100 100

# Formants 4,5 are higher than F3. They affect the quality of the voice.
##The next 2 lines are settings that you can change.
formant 4 100 100 100
formant 5 100 100 100

## Formants 6, 7, and 8 are weak, high frequency, additions to vowels to give a clearer sound.
##The next 3 lines are settings that you can change.
formant 6 100 100 100
formant 7 100 100 100
formant 8 100 100 100

##Intonation affects the rise and fall of the voice
## The settings are 1 default, 2 less intonation, 3 less intonation and commas do not raise the pitch, 4 the pitch rises at the end of a sentence rather than falling.
##The next line is a setting you can change.
intonation 1

# Setting the pitch range.  The first number gives a base pitch to the voice (value in Hertz).  The second number controls the range of pitches used by the voice. Setting it equal
# to the first number will give a monotone sounding voice.  The default values are 82 and 118.
pitch 82 118
## The tone setting.  The first number on the setting line, 600, is the frequency setting for the amount of bass in the voice.
## The second number on the tone line is the volume of the bass frequency.  You can set it from 0 to 255, 0 being the least amount, 255 being the most.
##The third number on the tone line, 1200, is the mid range frequency.  The fourth number on the line is the setting to change the volume of the mid range frequency.
##0 being the least amount and 255 being the maximum.
## The fifth number on the tone line, 2000, is the treble frequency.  The sixth number is the volume of the treble frequency.  0 is the minimum and 255 is the maximum.
##  You will notice that all 3 frequencies are set to 255.
##The next line is a setting that you can change.
tone 600 255  1200 255 2000 255
##This file does not include all of the settings that can be used to modify an E Speak voice.  It is intended to get you familiar with what the settings do.
##However, you can go to http://espeak.sourceforge.net/voices.html and read further information about other settings that can be added and changed.  I hope this helps, and Have fun.

On 13/03/2020 12:37 am, Bhavya shah wrote:
Dear all,

I am currently looking at all the ESpeak-NG variant files in
C:\Program Files (x86)\NVDA\synthDrivers\espeak-ng-data\voices\!v. I
was hoping to dip my feet in editing and improving ESpeak-NG variants
in the coming days, and see what I might be able to come up with.
* The variant files don't seem to have any extension. Which editor
should I open them with? Currently viewing a lot of numbers when
opening one of the variant files using Notepad.
* I would assume that if these numbers are meaningful, they depict
different parameters of a voice. Is there some reference on what these
different properties of speech are, so that I know what aspect of the
speech I am tweakingg when changing any number?
* Any other tips or thoughts on creating new ESpeak-NG variants and
refining existing one would also be useful.

I would greatly appreciate any assistance.

Best Regards,
Bhavya


Re: Math contents output in braille

Mallard
 

Hello,


Could it be made a toggle or something, so people could choose which code to use according to where they aer, and what the code used in their country is?


I'm asking, becase I'm facing this problem right now, trying to hlep someone in a different country from where I live.


Thanks, ciao,

Ollie

On 12/03/2020 13:19, 高生旺 wrote:
Hello all,

Now the math contents output in braille were same as speaking.
Do you like it?
Or they should output as Nemeth braille code.
Which do you like?

Cheers


Re: NVDA problem reading Libr Office Calc spreadsheet

Chris Mullins
 

Hi Zara

Thanks for the tip, that seems to have solved the problem.  I just opened some sheets I created a few weeks ago and I have never had to use that key combination in that manner before today but it works so I’m happy.

 

Cheers

Chris

 

From: zahra
Sent: 12 March 2020 14:48
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA problem reading Libr Office Calc spreadsheet

 

hi.

did you press f2 before reading spredsheets?

in some versions of libreoffice , you need f2 and scape first.

 

On 3/12/20, Chris Mullins <cjmullins29@...> wrote:

>             Hi

> I’m having a problem reading a Libra office Calc spreadsheet.  On opening

> the file I press Control+home to start at the top but as soon as I try and

> use the arrow keys to move between cells, silence ensues.  Please find the

> log file image below.

> Cheers

> Chris

> INFO - __main__ (11:20:22.891) - MainThread (3444):

> Starting NVDA version 2019.3.1

> INFO - core.main (11:20:23.094) - MainThread (3444):

> Config dir: C:\Users\Chris\AppData\Roaming\nvda

> INFO - config.ConfigManager._loadConfig (11:20:23.094) - MainThread (3444):

> Loading config: C:\Users\Chris\AppData\Roaming\nvda\nvda.ini

> INFO - core.main (11:20:23.235) - MainThread (3444):

> Using Windows version 10.0.18363 workstation

> INFO - core.main (11:20:23.241) - MainThread (3444):

> Using Python version 3.7.5 (tags/v3.7.5:5c02a39a0b, Oct 14 2019, 23:09:19)

> [MSC v.1916 32 bit (Intel)]

> INFO - core.main (11:20:23.241) - MainThread (3444):

> Using comtypes version 1.1.7

> INFO - core.main (11:20:23.241) - MainThread (3444):

> Using configobj version 5.1.0 with validate version 1.0.1

> INFO - synthDriverHandler.setSynth (11:20:23.889) - MainThread (3444):

> Loaded synthDriver oneCore

> INFO - core.main (11:20:23.889) - MainThread (3444):

> Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5 with six version

> 1.12.0

> INFO - brailleInput.initialize (11:20:23.894) - MainThread (3444):

> Braille input initialized

> INFO - braille.initialize (11:20:23.894) - MainThread (3444):

> Using liblouis version 3.10.0

> INFO - braille.initialize (11:20:23.899) - MainThread (3444):

> Using pySerial version 3.4

> INFO - braille.BrailleHandler.setDisplayByName (11:20:23.909) - MainThread

> (3444):

> Loaded braille display driver noBraille, current display has 0 cells.

> INFO - core.main (11:20:24.178) - MainThread (3444):

> Java Access Bridge support initialized

> INFO - _UIAHandler.UIAHandler.MTAThreadFunc (11:20:24.204) -

> _UIAHandler.UIAHandler.MTAThread (8756):

> UIAutomation: IUIAutomation6

> INFO - core.main (11:20:25.370) - MainThread (3444):

> NVDA initialized

> INFO - globalCommands.GlobalCommands.script_navigatorObject_devInfo

> (11:22:07.383) - MainThread (3444):

> Developer info for navigator object:

> name: None

> role: ROLE_TABLECELL

> roleText: None

> states:

> isFocusable: False

> hasFocus: False

> Python object:

> <NVDAObjects.Dynamic_SymphonyTableCellEditableTextWithAutoSelectDetectionIAccessible

> object at 0x07DCF390>

> Python class mro: (<class

> 'NVDAObjects.Dynamic_SymphonyTableCellEditableTextWithAutoSelectDetectionIAccessible'>,

> <class 'appModules.soffice.SymphonyTableCell'>, <class

> 'NVDAObjects.behaviors.EditableTextWithAutoSelectDetection'>, <class

> 'NVDAObjects.IAccessible.IAccessible'>, <class 'NVDAObjects.window.Window'>,

> <class 'NVDAObjects.behaviors.EditableText'>, <class

> 'editableText.EditableText'>, <class 'NVDAObjects.NVDAObject'>, <class

> 'documentBase.TextContainerObject'>, <class 'baseObject.ScriptableObject'>,

> <class 'baseObject.AutoPropertyObject'>, <class 'object'>)

> description: None

> location: RectLTWH(left=0, top=0, width=0, height=0)

> value: None

> appModule: <'soffice' (appName 'soffice', process ID 5132) at address

> 87733f0>

> appModule.productName: 'LibreOffice'

> appModule.productVersion: '6.3.4.2'

> TextInfo: <class 'appModules.soffice.SymphonyTextInfo'>

> windowHandle: 394264

> windowClassName: 'SALFRAME'

> windowControlID: 0

> windowStyle: 365887488

> extendedWindowStyle: 256

> windowThreadID: 3652

> windowText: 'Phase2_Drawdown.ods - LibreOffice Calc'

> displayText: ''

> IAccessibleObject: <POINTER(IAccessible2) ptr=0x746781c at 8672b20>

> IAccessibleChildID: 0

> IAccessible event parameters: windowHandle=394264, objectID=-4,

> childID=-1037

> IAccessible accName: None

> IAccessible accRole: None

> IAccessible accState: exception: unsupported operand type(s) for &:

> 'NoneType' and 'int'

> IAccessible accDescription: None

> IAccessible accValue: None

> IAccessible2 windowHandle: 0

> IAccessible2 uniqueID: 0

> IAccessible2 role: ROLE_SYSTEM_CELL

> IAccessible2 states:  (0)

> IAccessible2 attributes: None

>

 

 

--

By God,

were I given all the seven heavens

with all they contain

in order that

I may disobey God

by depriving an ant

from the husk of a grain of barley,

I would not do it.

imam ali

 

 

 


Re: Vocaliser Driver Update

Rui Fontes
 

The voices add-ons only need to be replaced if they show up in Add-on manager as incompatible...


If you want, I am available to make a remote session to solve your problem.


Rui Fontes

Tiflotecnia, Lda.


Às 16:42 de 12/03/2020, Richard Wells escreveu:

Andrea: I got the driver, but I can't get any of the voices to work. Is
there a new link for them as well?

On 3/11/2020 4:29 PM, Andrea Sherry wrote:
This is a direct link to the new driver:
https://www.tiflotecnia.net/Instal/vocalizer_expressive_driver-3.1.1.nvda-addon

Cheers
Andrea



Re: NVDA and the new orbit displays N

Sarah k Alawami
 

I believe orbit research has info about their new products on their website . You can also look at the blind bargains page to see about the new products. No shipping dates for any of the new products but you can preorder them. Here's hoping by the time we get them they will work with nvda what ever is out by then.

Blessings and happy Thursday

Sarah Alawami, owner of TFFP. . For more info go to our website.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on [twitch.](http://twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page YOu will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 12 Mar 2020, at 9:45, Luis Carlos Gonzáles Moráles wrote:

Are those new orbit displays have new features? Where can I purchase it? Is the Orbit Reader 40 more powerfull than the 20? How is the 20 plus different than the regular 20? Is the reader 40 more featured than the 20?
I know, beginner questions for someone who doesn't have a braille display, so yeah...
Josh Kennedy wrote:

Hi,
Will nvda2019.3 work with the new orbit displays including. Orbit reader20 plus, and orbit reader40? And will NVDA work fully with the orbit writer braille keyboard for inputting grade2 braille?
The orbit reader20plus is $700. The orbit reader40 is on pre-order for $1400. And the orbit writer braille keyboard is $99.

Josh

Sent from my iPod


Re: NVDA and the new orbit displays N

Luis Carlos González Moráles
 

Are those new orbit displays have new features? Where can I purchase it? Is the Orbit Reader 40 more powerfull than the 20? How is the 20 plus different than the regular 20? Is the reader 40 more featured than the 20?
I know, beginner questions for someone who doesn't have a braille display, so yeah...
Josh Kennedy wrote:

Hi,
Will nvda2019.3 work with the new orbit displays including. Orbit reader20 plus, and orbit reader40? And will NVDA work fully with the orbit writer braille keyboard for inputting grade2 braille?
The orbit reader20plus is $700. The orbit reader40 is on pre-order for $1400. And the orbit writer braille keyboard is $99.

Josh


Sent from my iPod


Re: Vocaliser Driver Update

Richard Wells
 

Andrea: I got the driver, but I can't get any of the voices to work. Is
there a new link for them as well?

On 3/11/2020 4:29 PM, Andrea Sherry wrote:
This is a direct link to the new driver:
https://www.tiflotecnia.net/Instal/vocalizer_expressive_driver-3.1.1.nvda-addon

Cheers
Andrea


Re: Editing ESpeak-NG Variant Files

Laz
 

A plain text editor like Notepad is what one would use to open variant
files. Someone else should answer your other questions as I don't have
that information.

Laz

On 3/12/20, Bhavya shah <bhavya.shah125@gmail.com> wrote:
Dear all,

I am currently looking at all the ESpeak-NG variant files in
C:\Program Files (x86)\NVDA\synthDrivers\espeak-ng-data\voices\!v. I
was hoping to dip my feet in editing and improving ESpeak-NG variants
in the coming days, and see what I might be able to come up with.
* The variant files don't seem to have any extension. Which editor
should I open them with? Currently viewing a lot of numbers when
opening one of the variant files using Notepad.
* I would assume that if these numbers are meaningful, they depict
different parameters of a voice. Is there some reference on what these
different properties of speech are, so that I know what aspect of the
speech I am tweakingg when changing any number?
* Any other tips or thoughts on creating new ESpeak-NG variants and
refining existing one would also be useful.

I would greatly appreciate any assistance.

Best Regards,
Bhavya



--
Affordably priced Accessible Talking MP3 Players, Accessible phones,
Bluetooth devices, and accessories
http://www.talkingmp3players.com/
Email: laz@talkingmp3players.com
Phone: 727-498-0121
Skype: lazmesa
Personal Facebook: https://m.facebook.com/laz.mesa
Facebook: https://m.facebook.com/Talkingmp3players?_rdr


Re: Edge again

 

Are you trying to change the language for Edge alone?

It's my understanding, at least for the stable version of Edge, that it should follow whatever language you have set as the Windows Display Language under Settings, Time & Language, Language Pane.   I don't know if any of the preview channels (Beta, Dev, Canary) do this, though I'd expect they would.

If you have the stable version of Edge installed, and all your other system utilities like File Explorer, Settings themselves, etc., all show up in Czech then I'd report the issue to Microsoft via the Feedback Hub or from within Edge itself via the Send Feedback button (if it exists in the stable version.  I can reach it in Dev by hitting ALT then left arrowing until I land on it.)
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Power is being told you're not loved and not being destroyed by it.

       ~ Madonna

 

 


locked Re: NVDA and wordpress

Sarah k Alawami
 

I personally don't believe in using free web hosting. I pay for all of mine, and my clients' web hosting packages, or at least they do lol! I'ts much better that way, and you are in control of what plugins you use and don't use, and can scan for problems etc.

Sarah Alawami, owner of TFFP. . For more info go to our website.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on [twitch.](http://twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page

Finally, to become a patron and help support the podcast go here

On 12 Mar 2020, at 6:01, William Wong wrote:

Hi,

I would like to know, are there visually impaired people using wordpress for your site?

Are you using any free webhosting, and any of them are accessible using NVDA?

Thanks,

William


Re: NVDA problem reading Libr Office Calc spreadsheet

 

hi.
did you press f2 before reading spredsheets?
in some versions of libreoffice , you need f2 and scape first.

On 3/12/20, Chris Mullins <cjmullins29@gmail.com> wrote:
Hi
I’m having a problem reading a Libra office Calc spreadsheet. On opening
the file I press Control+home to start at the top but as soon as I try and
use the arrow keys to move between cells, silence ensues. Please find the
log file image below.

Cheers
Chris

INFO - __main__ (11:20:22.891) - MainThread (3444):
Starting NVDA version 2019.3.1
INFO - core.main (11:20:23.094) - MainThread (3444):
Config dir: C:\Users\Chris\AppData\Roaming\nvda
INFO - config.ConfigManager._loadConfig (11:20:23.094) - MainThread (3444):
Loading config: C:\Users\Chris\AppData\Roaming\nvda\nvda.ini
INFO - core.main (11:20:23.235) - MainThread (3444):
Using Windows version 10.0.18363 workstation
INFO - core.main (11:20:23.241) - MainThread (3444):
Using Python version 3.7.5 (tags/v3.7.5:5c02a39a0b, Oct 14 2019, 23:09:19)
[MSC v.1916 32 bit (Intel)]
INFO - core.main (11:20:23.241) - MainThread (3444):
Using comtypes version 1.1.7
INFO - core.main (11:20:23.241) - MainThread (3444):
Using configobj version 5.1.0 with validate version 1.0.1
INFO - synthDriverHandler.setSynth (11:20:23.889) - MainThread (3444):
Loaded synthDriver oneCore
INFO - core.main (11:20:23.889) - MainThread (3444):
Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5 with six version
1.12.0
INFO - brailleInput.initialize (11:20:23.894) - MainThread (3444):
Braille input initialized
INFO - braille.initialize (11:20:23.894) - MainThread (3444):
Using liblouis version 3.10.0
INFO - braille.initialize (11:20:23.899) - MainThread (3444):
Using pySerial version 3.4
INFO - braille.BrailleHandler.setDisplayByName (11:20:23.909) - MainThread
(3444):
Loaded braille display driver noBraille, current display has 0 cells.
INFO - core.main (11:20:24.178) - MainThread (3444):
Java Access Bridge support initialized
INFO - _UIAHandler.UIAHandler.MTAThreadFunc (11:20:24.204) -
_UIAHandler.UIAHandler.MTAThread (8756):
UIAutomation: IUIAutomation6
INFO - core.main (11:20:25.370) - MainThread (3444):
NVDA initialized
INFO - globalCommands.GlobalCommands.script_navigatorObject_devInfo
(11:22:07.383) - MainThread (3444):
Developer info for navigator object:
name: None
role: ROLE_TABLECELL
roleText: None
states:
isFocusable: False
hasFocus: False
Python object:
<NVDAObjects.Dynamic_SymphonyTableCellEditableTextWithAutoSelectDetectionIAccessible
object at 0x07DCF390>
Python class mro: (<class
'NVDAObjects.Dynamic_SymphonyTableCellEditableTextWithAutoSelectDetectionIAccessible'>,
<class 'appModules.soffice.SymphonyTableCell'>, <class
'NVDAObjects.behaviors.EditableTextWithAutoSelectDetection'>, <class
'NVDAObjects.IAccessible.IAccessible'>, <class 'NVDAObjects.window.Window'>,
<class 'NVDAObjects.behaviors.EditableText'>, <class
'editableText.EditableText'>, <class 'NVDAObjects.NVDAObject'>, <class
'documentBase.TextContainerObject'>, <class 'baseObject.ScriptableObject'>,
<class 'baseObject.AutoPropertyObject'>, <class 'object'>)
description: None
location: RectLTWH(left=0, top=0, width=0, height=0)
value: None
appModule: <'soffice' (appName 'soffice', process ID 5132) at address
87733f0>
appModule.productName: 'LibreOffice'
appModule.productVersion: '6.3.4.2'
TextInfo: <class 'appModules.soffice.SymphonyTextInfo'>
windowHandle: 394264
windowClassName: 'SALFRAME'
windowControlID: 0
windowStyle: 365887488
extendedWindowStyle: 256
windowThreadID: 3652
windowText: 'Phase2_Drawdown.ods - LibreOffice Calc'
displayText: ''
IAccessibleObject: <POINTER(IAccessible2) ptr=0x746781c at 8672b20>
IAccessibleChildID: 0
IAccessible event parameters: windowHandle=394264, objectID=-4,
childID=-1037
IAccessible accName: None
IAccessible accRole: None
IAccessible accState: exception: unsupported operand type(s) for &:
'NoneType' and 'int'
IAccessible accDescription: None
IAccessible accValue: None
IAccessible2 windowHandle: 0
IAccessible2 uniqueID: 0
IAccessible2 role: ROLE_SYSTEM_CELL
IAccessible2 states: (0)
IAccessible2 attributes: None




--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali


Edge again

Jarek.Krcmar
 

Hi group,

I had to reinstalled my computer, there I installed the new Edge: I would like change a language.

What can I do for change language? There is an English and I need Czech.


--
Jarek


locked NVDA and wordpress

William
 

Hi,

I would like to know, are there visually impaired people using wordpress for your site?

Are you using any free webhosting, and any of them are accessible using NVDA?


Thanks,

William


Re: Math contents output in braille

David Csercsics
 

I'd prefer Nemeth if that was possible. Has anyone done anything with UEB math? Just curious.


Math contents output in braille

=?ISO-2022-JP?Q?=1B$B9b=4082=22=1B=28J?=
 

Hello all,

Now the math contents output in braille were same as speaking.
Do you like it?
Or they should output as Nemeth braille code.
Which do you like?

Cheers


NVDA and the new orbit displays N

Josh Kennedy
 

Hi,
Will nvda2019.3 work with the new orbit displays including. Orbit reader20 plus, and orbit reader40? And will NVDA work fully with the orbit writer braille keyboard for inputting grade2 braille?
The orbit reader20plus is $700. The orbit reader40 is on pre-order for $1400. And the orbit writer braille keyboard is $99.

Josh


Sent from my iPod


Editing ESpeak-NG Variant Files

Bhavya shah
 

Dear all,

I am currently looking at all the ESpeak-NG variant files in
C:\Program Files (x86)\NVDA\synthDrivers\espeak-ng-data\voices\!v. I
was hoping to dip my feet in editing and improving ESpeak-NG variants
in the coming days, and see what I might be able to come up with.
* The variant files don't seem to have any extension. Which editor
should I open them with? Currently viewing a lot of numbers when
opening one of the variant files using Notepad.
* I would assume that if these numbers are meaningful, they depict
different parameters of a voice. Is there some reference on what these
different properties of speech are, so that I know what aspect of the
speech I am tweakingg when changing any number?
* Any other tips or thoughts on creating new ESpeak-NG variants and
refining existing one would also be useful.

I would greatly appreciate any assistance.

Best Regards,
Bhavya


NVDA problem reading Libr Office Calc spreadsheet

Chris Mullins
 

                Hi

I’m having a problem reading a Libra office Calc spreadsheet.  On opening the file I press Control+home to start at the top but as soon as I try and use the arrow keys to move between cells, silence ensues.  Please find the log file image below.

 

Cheers

Chris

 

INFO - __main__ (11:20:22.891) - MainThread (3444):

Starting NVDA version 2019.3.1

INFO - core.main (11:20:23.094) - MainThread (3444):

Config dir: C:\Users\Chris\AppData\Roaming\nvda

INFO - config.ConfigManager._loadConfig (11:20:23.094) - MainThread (3444):

Loading config: C:\Users\Chris\AppData\Roaming\nvda\nvda.ini

INFO - core.main (11:20:23.235) - MainThread (3444):

Using Windows version 10.0.18363 workstation

INFO - core.main (11:20:23.241) - MainThread (3444):

Using Python version 3.7.5 (tags/v3.7.5:5c02a39a0b, Oct 14 2019, 23:09:19) [MSC v.1916 32 bit (Intel)]

INFO - core.main (11:20:23.241) - MainThread (3444):

Using comtypes version 1.1.7

INFO - core.main (11:20:23.241) - MainThread (3444):

Using configobj version 5.1.0 with validate version 1.0.1

INFO - synthDriverHandler.setSynth (11:20:23.889) - MainThread (3444):

Loaded synthDriver oneCore

INFO - core.main (11:20:23.889) - MainThread (3444):

Using wx version 4.0.3 msw (phoenix) wxWidgets 3.0.5 with six version 1.12.0

INFO - brailleInput.initialize (11:20:23.894) - MainThread (3444):

Braille input initialized

INFO - braille.initialize (11:20:23.894) - MainThread (3444):

Using liblouis version 3.10.0

INFO - braille.initialize (11:20:23.899) - MainThread (3444):

Using pySerial version 3.4

INFO - braille.BrailleHandler.setDisplayByName (11:20:23.909) - MainThread (3444):

Loaded braille display driver noBraille, current display has 0 cells.

INFO - core.main (11:20:24.178) - MainThread (3444):

Java Access Bridge support initialized

INFO - _UIAHandler.UIAHandler.MTAThreadFunc (11:20:24.204) - _UIAHandler.UIAHandler.MTAThread (8756):

UIAutomation: IUIAutomation6

INFO - core.main (11:20:25.370) - MainThread (3444):

NVDA initialized

INFO - globalCommands.GlobalCommands.script_navigatorObject_devInfo (11:22:07.383) - MainThread (3444):

Developer info for navigator object:

name: None

role: ROLE_TABLECELL

roleText: None

states:

isFocusable: False

hasFocus: False

Python object: <NVDAObjects.Dynamic_SymphonyTableCellEditableTextWithAutoSelectDetectionIAccessible object at 0x07DCF390>

Python class mro: (<class 'NVDAObjects.Dynamic_SymphonyTableCellEditableTextWithAutoSelectDetectionIAccessible'>, <class 'appModules.soffice.SymphonyTableCell'>, <class 'NVDAObjects.behaviors.EditableTextWithAutoSelectDetection'>, <class 'NVDAObjects.IAccessible.IAccessible'>, <class 'NVDAObjects.window.Window'>, <class 'NVDAObjects.behaviors.EditableText'>, <class 'editableText.EditableText'>, <class 'NVDAObjects.NVDAObject'>, <class 'documentBase.TextContainerObject'>, <class 'baseObject.ScriptableObject'>, <class 'baseObject.AutoPropertyObject'>, <class 'object'>)

description: None

location: RectLTWH(left=0, top=0, width=0, height=0)

value: None

appModule: <'soffice' (appName 'soffice', process ID 5132) at address 87733f0>

appModule.productName: 'LibreOffice'

appModule.productVersion: '6.3.4.2'

TextInfo: <class 'appModules.soffice.SymphonyTextInfo'>

windowHandle: 394264

windowClassName: 'SALFRAME'

windowControlID: 0

windowStyle: 365887488

extendedWindowStyle: 256

windowThreadID: 3652

windowText: 'Phase2_Drawdown.ods - LibreOffice Calc'

displayText: ''

IAccessibleObject: <POINTER(IAccessible2) ptr=0x746781c at 8672b20>

IAccessibleChildID: 0

IAccessible event parameters: windowHandle=394264, objectID=-4, childID=-1037

IAccessible accName: None

IAccessible accRole: None

IAccessible accState: exception: unsupported operand type(s) for &: 'NoneType' and 'int'

IAccessible accDescription: None

IAccessible accValue: None

IAccessible2 windowHandle: 0

IAccessible2 uniqueID: 0

IAccessible2 role: ROLE_SYSTEM_CELL

IAccessible2 states:  (0)

IAccessible2 attributes: None

 

9661 - 9680 of 80845