Date   

Re: How accessible is Zoom with NVDA?

Scott Salzman
 

Thanks for sharing this tip, Michael.

 

Scott

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Michael Munn via groups.io
Sent: Thursday, April 2, 2020 2:19 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How accessible is Zoom with NVDA?

 

You can actually enable Global Keyboard Shortcut by go to your Zoom Settings menu. To do that, press Tab Key until you heard settings. When you get to the settings menu, Press enter on it. 

After you pressed Enter, Press Down Arrow until you find Keyboard Shortcut. Press Space bar to get in to Keyboard Shortcut. then press Tab until you heard the following from your Screen Reader: "Learn more Enable Global Shortcut Button" Then press Down Arrow to find the keyboard shortcut that you want to enable. The keyboard shortcut are grouped in to a table, therefore you can Press CTRL+Ault plus  the arrow keys to navigate across the list of shortcut.  

 I hope the following information can be beneficial. 

Best regards 

Michael Munn 

 

 

Alt + control + shift doesn’t work. Well actually, I can’t tell, because NVDA is not telling me whether the controls have appeared or not. I’m using tab to navigate but I’m still getting nothing.

 

 

 

Sent from Mail for Windows 10

 

 

Ok Thanks. I’ll try again now

 

 

 

Sent from Mail for Windows 10

 

 

I've not experienced Zoom freezing, though I should note that I only use screen readers for testing, and not for routine use.  That said, I've spent a good bit of time using Zoom with NVDA and JAWS over the past week or so, and I've taken to exclusively using the Zoom keyboard commands, because they're so much easier and faster than using a mouse and hunting for the controls.

 

As far as the issue of it being difficult to tell which Zoom window is the one with your session, whenever I use Control+Alt+Shift, that always brings me back to the Zoom window with the session, and the Zoom controls.  You might consider using Alt+Tab to switch between Zoom and other applications, and then use Control+Alt+Shift whenever you want to switch back to Zoom.  It should guarantee both a single keyboard command, and getting to the correct Zoom window.

 

Scott

 

 

 

So I tried everything… it seems that Zoom keeps freezing. I also hear when I’m switching between different windows with Alt Tab, there are two windows of Zoom open when in a meeting. I think it’s the Zoom application and the meeting controls… but I can’t tell, since I’m having issues navigating. I did enable always show meeting controls in the accessibility settings.

 

 

 

Sent from Mail for Windows 10

 

 

Thank you so much. I’ll be sure to try out your suggestions. I’ll let you know how everything goes.

 

 

 

 

 

 

 


Re: expanding links that won't expand

Sarah k Alawami
 

jYep, exactly, and if it is not the dev it is probably the CMS they are using what ever that i snow a days.

Take care

Sarah Alawami, owner of TFFP. . For more info go to our website.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on [twitch.](http://twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page YOu will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 2 Apr 2020, at 7:44, Cohn, Jonathan wrote:

So this shows the web developer knows just enough ARIA to get them in trouble. The first rule of ARIA is don't use ARIA if you don't need to.


Re: most accessible audio recording software with nvda

Kerryn Gunness <k_gunness@...>
 

i would recommend gold wave and c dex, as someone else suggested

----- Original Message -----
From: "Jonathan Nadeau" <nadeau.jon@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Thursday, April 2, 2020 9:28 AM
Subject: [nvda] most accessible audio recording software with nvda


Greetings list,


Please excuse if this isn't the correct list for this question. Using nvda what is the most accessible audio recording software? If anyone could aim me in the right direction I would greatly appreciate it. I hope everyone is staying safe.



Re: How accessible is Zoom with NVDA?

Michael Munn
 

You can actually enable Global Keyboard Shortcut by go to your Zoom Settings menu. To do that, press Tab Key until you heard settings. When you get to the settings menu, Press enter on it. 
After you pressed Enter, Press Down Arrow until you find Keyboard Shortcut. Press Space bar to get in to Keyboard Shortcut. then press Tab until you heard the following from your Screen Reader: "Learn more Enable Global Shortcut Button" Then press Down Arrow to find the keyboard shortcut that you want to enable. The keyboard shortcut are grouped in to a table, therefore you can Press CTRL+Ault plus  the arrow keys to navigate across the list of shortcut.  
 I hope the following information can be beneficial. 
Best regards 
Michael Munn 

JAWS Certified, 2019

Member: Virginia Association of Blind Students National Federation of the Blind of Virginia 

www.nfbv.org

Student of: Hadley Institute of the Blind 

www.hadley.edu



On Thu, Apr 2, 2020 at 1:19 PM Matthew Whitaker <matthew.whitaker2011@...> wrote:

Alt + control + shift doesn’t work. Well actually, I can’t tell, because NVDA is not telling me whether the controls have appeared or not. I’m using tab to navigate but I’m still getting nothing.

 

 

 

Sent from Mail for Windows 10

 

From: Matthew Whitaker via groups.io
Sent: Thursday, April 2, 2020 1:13 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How accessible is Zoom with NVDA?

 

Ok Thanks. I’ll try again now

 

 

 

Sent from Mail for Windows 10

 

From: Scott Salzman
Sent: Thursday, April 2, 2020 1:11 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How accessible is Zoom with NVDA?

 

I've not experienced Zoom freezing, though I should note that I only use screen readers for testing, and not for routine use.  That said, I've spent a good bit of time using Zoom with NVDA and JAWS over the past week or so, and I've taken to exclusively using the Zoom keyboard commands, because they're so much easier and faster than using a mouse and hunting for the controls.

 

As far as the issue of it being difficult to tell which Zoom window is the one with your session, whenever I use Control+Alt+Shift, that always brings me back to the Zoom window with the session, and the Zoom controls.  You might consider using Alt+Tab to switch between Zoom and other applications, and then use Control+Alt+Shift whenever you want to switch back to Zoom.  It should guarantee both a single keyboard command, and getting to the correct Zoom window.

 

Scott

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Matthew Whitaker via groups.io
Sent: Thursday, April 2, 2020 1:05 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How accessible is Zoom with NVDA?

 

So I tried everything… it seems that Zoom keeps freezing. I also hear when I’m switching between different windows with Alt Tab, there are two windows of Zoom open when in a meeting. I think it’s the Zoom application and the meeting controls… but I can’t tell, since I’m having issues navigating. I did enable always show meeting controls in the accessibility settings.

 

 

 

Sent from Mail for Windows 10

 

From: Matthew Whitaker via groups.io
Sent: Thursday, April 2, 2020 11:52 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How accessible is Zoom with NVDA?

 

Thank you so much. I’ll be sure to try out your suggestions. I’ll let you know how everything goes.

 

 

 

 

 

 

 


Re: expanding links that won't expand

Sarah k Alawami
 

In this case it does help, however the Canada air express site which I do not have. Has a link that might not work this way. You have to hit enter on a link which will then expand to download the aircraft in question. I cannot be of any help here as I don't deal with those guys. Lol! But yeah thanks. I think I can grow some of the hair I have ben pulling out back, and i can finally get my orders and download links and stuff I need.

Sarah Alawami, owner of TFFP. . For more info go to our website.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on [twitch.](http://twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page YOu will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 1 Apr 2020, at 20:15, Brian Vogel wrote:

Sarah,

            First and foremost, thank you for posting a URL for myself and all other assistants.  I presume you mean the "Your Account" control which, by the way, is not a link, although the View Cart and Contact Us immediately next to it are both links.

            In looking at the page source for the Your Account control, it is a button, but what a mutant version of a button.  If you are using a mouse like I do, when you hover over this control the entire structure unveils itself for you to either point and click or click into text boxes like those for username and password.  Under NVDA 2019.3.1, I find that I can get to it using the quick browsing 'b' command for buttons only when the page has first loaded, and once I land on it hitting enter opens up the whole range of controls it unveils.  You can then TAB your way through all of them.  Even though there are text boxes, buttons, and links as part of that control, they must be TABBED through.  If I try using any of the usual single letter quick browsing commands I am instantly thrown back into the main body of the page itself and out of the "Your Account" control entirely.

             If I want to go back to that control, or even get to it in the first place, I find it far easier to use the browser search for "Your Account," hitting Escape to close the browser search once it's found, then NVDA has focus on the control and you can hit enter and start tabbing.

             I am using the latest version of Edge Dev (meaning I literally did the latest update after I'd opened that page, causing Edge Dev to restart).  It should work similarly under any Chromium-based browser, and probably Firefox and other non-Chromium-based browsers, too.

             Give this a whirl and let me know how it works for you.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Power is being told you're not loved and not being destroyed by it.

       ~ Madonna

 

 


Re: How accessible is Zoom with NVDA?

Matthew Whitaker
 

Alt + control + shift doesn’t work. Well actually, I can’t tell, because NVDA is not telling me whether the controls have appeared or not. I’m using tab to navigate but I’m still getting nothing.

 

 

 

Sent from Mail for Windows 10

 

From: Matthew Whitaker via groups.io
Sent: Thursday, April 2, 2020 1:13 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How accessible is Zoom with NVDA?

 

Ok Thanks. I’ll try again now

 

 

 

Sent from Mail for Windows 10

 

From: Scott Salzman
Sent: Thursday, April 2, 2020 1:11 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How accessible is Zoom with NVDA?

 

I've not experienced Zoom freezing, though I should note that I only use screen readers for testing, and not for routine use.  That said, I've spent a good bit of time using Zoom with NVDA and JAWS over the past week or so, and I've taken to exclusively using the Zoom keyboard commands, because they're so much easier and faster than using a mouse and hunting for the controls.

 

As far as the issue of it being difficult to tell which Zoom window is the one with your session, whenever I use Control+Alt+Shift, that always brings me back to the Zoom window with the session, and the Zoom controls.  You might consider using Alt+Tab to switch between Zoom and other applications, and then use Control+Alt+Shift whenever you want to switch back to Zoom.  It should guarantee both a single keyboard command, and getting to the correct Zoom window.

 

Scott

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Matthew Whitaker via groups.io
Sent: Thursday, April 2, 2020 1:05 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How accessible is Zoom with NVDA?

 

So I tried everything… it seems that Zoom keeps freezing. I also hear when I’m switching between different windows with Alt Tab, there are two windows of Zoom open when in a meeting. I think it’s the Zoom application and the meeting controls… but I can’t tell, since I’m having issues navigating. I did enable always show meeting controls in the accessibility settings.

 

 

 

Sent from Mail for Windows 10

 

From: Matthew Whitaker via groups.io
Sent: Thursday, April 2, 2020 11:52 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How accessible is Zoom with NVDA?

 

Thank you so much. I’ll be sure to try out your suggestions. I’ll let you know how everything goes.

 

 

 

 

 

 

 


Re: How accessible is Zoom with NVDA?

Matthew Whitaker
 

I was able to get to the controls somehow by using alt tab. It’s annoying because NVDA is not speaking to me at times. When I use alt tab I’m somehow able to get to the controls. It’s so weird.

 

 

 

Sent from Mail for Windows 10

 

From: Matthew Whitaker via groups.io
Sent: Thursday, April 2, 2020 1:13 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How accessible is Zoom with NVDA?

 

Ok Thanks. I’ll try again now

 

 

 

Sent from Mail for Windows 10

 

From: Scott Salzman
Sent: Thursday, April 2, 2020 1:11 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How accessible is Zoom with NVDA?

 

I've not experienced Zoom freezing, though I should note that I only use screen readers for testing, and not for routine use.  That said, I've spent a good bit of time using Zoom with NVDA and JAWS over the past week or so, and I've taken to exclusively using the Zoom keyboard commands, because they're so much easier and faster than using a mouse and hunting for the controls.

 

As far as the issue of it being difficult to tell which Zoom window is the one with your session, whenever I use Control+Alt+Shift, that always brings me back to the Zoom window with the session, and the Zoom controls.  You might consider using Alt+Tab to switch between Zoom and other applications, and then use Control+Alt+Shift whenever you want to switch back to Zoom.  It should guarantee both a single keyboard command, and getting to the correct Zoom window.

 

Scott

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Matthew Whitaker via groups.io
Sent: Thursday, April 2, 2020 1:05 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How accessible is Zoom with NVDA?

 

So I tried everything… it seems that Zoom keeps freezing. I also hear when I’m switching between different windows with Alt Tab, there are two windows of Zoom open when in a meeting. I think it’s the Zoom application and the meeting controls… but I can’t tell, since I’m having issues navigating. I did enable always show meeting controls in the accessibility settings.

 

 

 

Sent from Mail for Windows 10

 

From: Matthew Whitaker via groups.io
Sent: Thursday, April 2, 2020 11:52 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How accessible is Zoom with NVDA?

 

Thank you so much. I’ll be sure to try out your suggestions. I’ll let you know how everything goes.

 

 

 

 

 

 

 


Re: How accessible is Zoom with NVDA?

Matthew Whitaker
 

Ok Thanks. I’ll try again now

 

 

 

Sent from Mail for Windows 10

 

From: Scott Salzman
Sent: Thursday, April 2, 2020 1:11 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How accessible is Zoom with NVDA?

 

I've not experienced Zoom freezing, though I should note that I only use screen readers for testing, and not for routine use.  That said, I've spent a good bit of time using Zoom with NVDA and JAWS over the past week or so, and I've taken to exclusively using the Zoom keyboard commands, because they're so much easier and faster than using a mouse and hunting for the controls.

 

As far as the issue of it being difficult to tell which Zoom window is the one with your session, whenever I use Control+Alt+Shift, that always brings me back to the Zoom window with the session, and the Zoom controls.  You might consider using Alt+Tab to switch between Zoom and other applications, and then use Control+Alt+Shift whenever you want to switch back to Zoom.  It should guarantee both a single keyboard command, and getting to the correct Zoom window.

 

Scott

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Matthew Whitaker via groups.io
Sent: Thursday, April 2, 2020 1:05 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How accessible is Zoom with NVDA?

 

So I tried everything… it seems that Zoom keeps freezing. I also hear when I’m switching between different windows with Alt Tab, there are two windows of Zoom open when in a meeting. I think it’s the Zoom application and the meeting controls… but I can’t tell, since I’m having issues navigating. I did enable always show meeting controls in the accessibility settings.

 

 

 

Sent from Mail for Windows 10

 

From: Matthew Whitaker via groups.io
Sent: Thursday, April 2, 2020 11:52 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How accessible is Zoom with NVDA?

 

Thank you so much. I’ll be sure to try out your suggestions. I’ll let you know how everything goes.

 

 

 

 

 

 


Re: How accessible is Zoom with NVDA?

Scott Salzman
 

I've not experienced Zoom freezing, though I should note that I only use screen readers for testing, and not for routine use.  That said, I've spent a good bit of time using Zoom with NVDA and JAWS over the past week or so, and I've taken to exclusively using the Zoom keyboard commands, because they're so much easier and faster than using a mouse and hunting for the controls.

 

As far as the issue of it being difficult to tell which Zoom window is the one with your session, whenever I use Control+Alt+Shift, that always brings me back to the Zoom window with the session, and the Zoom controls.  You might consider using Alt+Tab to switch between Zoom and other applications, and then use Control+Alt+Shift whenever you want to switch back to Zoom.  It should guarantee both a single keyboard command, and getting to the correct Zoom window.

 

Scott

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Matthew Whitaker via groups.io
Sent: Thursday, April 2, 2020 1:05 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How accessible is Zoom with NVDA?

 

So I tried everything… it seems that Zoom keeps freezing. I also hear when I’m switching between different windows with Alt Tab, there are two windows of Zoom open when in a meeting. I think it’s the Zoom application and the meeting controls… but I can’t tell, since I’m having issues navigating. I did enable always show meeting controls in the accessibility settings.

 

 

 

Sent from Mail for Windows 10

 

From: Matthew Whitaker via groups.io
Sent: Thursday, April 2, 2020 11:52 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How accessible is Zoom with NVDA?

 

Thank you so much. I’ll be sure to try out your suggestions. I’ll let you know how everything goes.

 

 

 

 

 


Re: How accessible is Zoom with NVDA?

Matthew Whitaker
 

So I tried everything… it seems that Zoom keeps freezing. I also hear when I’m switching between different windows with Alt Tab, there are two windows of Zoom open when in a meeting. I think it’s the Zoom application and the meeting controls… but I can’t tell, since I’m having issues navigating. I did enable always show meeting controls in the accessibility settings.

 

 

 

Sent from Mail for Windows 10

 

From: Matthew Whitaker via groups.io
Sent: Thursday, April 2, 2020 11:52 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How accessible is Zoom with NVDA?

 

Thank you so much. I’ll be sure to try out your suggestions. I’ll let you know how everything goes.

 

 

 

 

 


Re: How accessible is Zoom with NVDA?

Matthew Whitaker
 

Thank you so much. I’ll be sure to try out your suggestions. I’ll let you know how everything goes.


Re: How accessible is Zoom with NVDA?

Scott Salzman
 

Hi Matthew,

 

If I'm understanding your question correctly, you might want to try using the Zoom keyboard command Control+Alt+Shift, which will move focus to zoom's meeting controls.  It will do this, even if your focus was in another application.

 

Pressing the Alt key, by itself, will toggle the display or hiding of the Zoom controls.  If they're hidden, you won't be able to tab to them.  There's a better way to handle the persistent display of the Zoom controls, via an Accessibility setting in the Zoom application.  To get there, you can tab to the "Audio Settings button" and press Enter.  Then use the Down Arrow key to get to the "Audio Settings" option.  Press Enter.  That was just a way to get into the overall Zoom settings menu.  Now, use the Tab key to move through the Audio settings, until you get to the last one (Sync buttons), then press Tab once more and you should hear NVDA say "List audio selected".  Now use the Down Arrow key to get to Accessibility settings.  Press Enter.  Press Tab to move through the Accessibility settings, until you hear the option "Always show meeting controls".  If you enable this option, you shouldn't lose focus of the Zoom controls, as long as you have focus in the Zoom application, and using Control+Alt+Shift will always get you back there.

 

Also, have you seen the Zoom keyboard shortcuts?  That page should automatically open to the section for Windows shortcuts (it will take a few seconds to that, after the page loads).

 

Hope this was helpful.

 

Scott

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Matthew Whitaker via groups.io
Sent: Thursday, April 2, 2020 11:03 AM
To: nvda@nvda.groups.io
Subject: [nvda] How accessible is Zoom with NVDA?

 

Moderator Note:  Welcome Matthew.   I have integrated your query with a recent topic:  How accessible is Zoom with NVDA?
It would be worth reviewing what's been previously discussed in it.

-----

Hello. Does anyone here know how to navigate the Zoom interface with NVDA when in the meeting? I always seem to loose focus with NVDA and I can't navigate at time's with the tab key. In fact, other screen reader's I use are having the same issue. Could there be an addon for NVDA? I have the latest version of the screen reader. 


Thank you 


Re: How accessible is Zoom with NVDA?

Matthew Whitaker
 

Ok thanks 


Re: How accessible is Zoom with NVDA?

 

You might also want to download a copy of Jonathan Mosen's audiobook, Meet Me Accessibly – A Guide to Zoom Cloud Meetings from a Blindness Perspective.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Power is being told you're not loved and not being destroyed by it.

       ~ Madonna

 

 


How accessible is Zoom with NVDA?

Matthew Whitaker
 

Moderator Note:  Welcome Matthew.   I have integrated your query with a recent topic:  How accessible is Zoom with NVDA?
It would be worth reviewing what's been previously discussed in it.

-----

Hello. Does anyone here know how to navigate the Zoom interface with NVDA when in the meeting? I always seem to loose focus with NVDA and I can't navigate at time's with the tab key. In fact, other screen reader's I use are having the same issue. Could there be an addon for NVDA? I have the latest version of the screen reader. 


Thank you 



Re: most accessible audio recording software with nvda

Damien Garwood <damien@...>
 

Hi there,
Personally, I use GoldWave, which is an audio editor as well as recorder, converter, and CD ripper. It is accessible and even has an NVDA add-on, and is relatively cheap.
If you're looking for something free, then CDex is relatively decent, though beware the adware! Best to download the portable version, even though it is older.
CDex is primarily a CD ripper, but with file conversion and recording capabilities as well.
Cheers,
Damien.

On 02/04/2020 02:28 pm, Jonathan Nadeau wrote:
Greetings list,
Please excuse if this isn't the correct list for this question. Using nvda what is the most accessible audio recording software? If anyone could aim me in the right direction I would greatly appreciate it. I hope everyone is staying safe.


Re: most accessible audio recording software with nvda

Gene
 

There are a number of accessible recording programs.  The first question is how you want to use it.  If you just want to record and edit mp3 files, MP3 Direct Cut is the program to use.  For other purposes, other programs can be discussed.
 
Gene

----- Original Message -----
From: Dan Beaver
Sent: Thursday, April 02, 2020 10:03 AM
Subject: Re: [nvda] most accessible audio recording software with nvda
 

The Voice Recorder app that comes with Windows is very accessible but it only records in the M4A format.


Dan Beaver

On 4/2/2020 9:28 AM, Jonathan Nadeau wrote:
Greetings list,


Please excuse if this isn't the correct list for this question. Using nvda what is the most accessible audio recording software? If anyone could aim me in the right direction I would greatly appreciate it. I hope everyone is staying safe.




-- 
Dan Beaver (KA4DAN)


Re: most accessible audio recording software with nvda

Dan Beaver
 

The Voice Recorder app that comes with Windows is very accessible but it only records in the M4A format.


Dan Beaver

On 4/2/2020 9:28 AM, Jonathan Nadeau wrote:
Greetings list,


Please excuse if this isn't the correct list for this question. Using nvda what is the most accessible audio recording software? If anyone could aim me in the right direction I would greatly appreciate it. I hope everyone is staying safe.




-- 
Dan Beaver (KA4DAN)


Re: Does nvda work with Microsoft teams?

 

Welcome Eilana.  I have integrated your question into a currently active topic:  Does nvda work with Microsoft teams? 

Activate that link to review what has been discussed already over the last day.  This message, by member Pramit, with a tutorial might be of particular interest.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Power is being told you're not loved and not being destroyed by it.

       ~ Madonna

 

 


Does nvda work with Microsoft teams?

Eilana Benish
 

hello everybody

I have installed today Microsoft team app For Windows ten 64 bit

I am working with NVDA 2019.3.1  with vocalizer Expressive addons for NVDA with English and Hebrew voices

the problem I have with Microsoft teams is that when moving between different programs ,and then returning to Microsoft teams app I no longer hear NVDA speech on the Microsoft teems app. NVDA keeps speaking  on windows in all of the programs I use to work with but not on Microsoft teems app. I can see the focus moves between the different elements of the program but no speech .by the way this is happens also with JAWS 2019. Only if I restart my computer and then restart NVDA and then open the Microsoft Teams app ,NVDA works with speech on the app .

Also I have tried to change TTS to the windows one core voice and two other voices  - and the issue still happening.

16841 - 16860 of 88842