Can you both please clarify exactly which voices / synthesizers you are
using? Sandesh, I'm not familiar with a synth called "AP4", but did you
mean SAPI 4"?

It sounds like you managed to get back to a voice you can use, but if you
do set the synthesizer to something which doesn't work, two ways to
overcome it are:

1) Revert NVDA to the last saved configuration by pressing NVDA+CONTROL+R.
If all else fails, pressing this three times quickly will reset NVDA back
to factory settings.

2) Or you can change the synthesizer again, if you are happy to try doing
so without speech:
- Press NVDA+CONTROL+S to open the synthesizer dialog
- Press W for Windows OneCore voices or E for eSpeak-NG.
- Press ENTER. The new synthesizer should load and start speaking.

Note that this assumes Windows OneCore is the only (or at least first
alphabetically) synthesizer beginning with W and eSpeak NG is the only or
first beginning with E.

Regards

Quentin.

On Wed, Apr 22, 2020 at 2:06 PM Robert Doc Wright godfearer <
godfearer@comcast.net> wrote:

I have had a similar problem. When I switch to Sapi5 I get silence.
ESpeak
and ?windows core are fine.
******
If we don't take time to think before we speak we may find ourselves in a
situation where our speech becomes a bit stinky!
----- Original Message -----
From: "Sandesh computer trainer HR" <rh.sandesh@gmail.com>
To: "nvda" <nvda@nvda.groups.io>
Sent: Tuesday, April 21, 2020 7:43 PM
Subject: [nvda] NVDA voice profiles are not functioning in latest NVDA
after
changing synthesizer

Hi friends,
Seeking your assistance to resolve below NVDA strange problem.
I have updated to latest version NVDA.
Soon after I have change synthesizer A P 4. Later I have exit the
NVDA.
While verifying NVDA features. I have reactivated NVDA through short
key.
Unable to hear the NVDA voice.
I have reinstalled NVDA yesterday twice.
Still I am unable to listen NVDA voices.

With regards,
Sandesh HR

--
Quentin Christensen
Training and Support Manager

Web: www.nvaccess.org
Training: https://www.nvaccess.org/shop/
Certification: https://certification.nvaccess.org/
User group: https://nvda.groups.io/g/nvda
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess <https://twitter.com/NVAccess>

I played with it a few weeks back, but ultimately removed the addon as it crashed NVDA too often.

On 17/04/2020 12:13, hurrikennyandopo ... wrote:

Hi guys



I was browsing the under development section and saw the add on for Windows magnifier. I knew there was one for windows 7 but no higher back then.


it looks as though this will work on windows 10

I seen this add on a little while back on the section under development.


has any one who has a bit more sight have a play with this add on and how well did it work?


I saw it when installed went up to 16 times magnification in Windows I thought it used to only be like 4 times at one time maybe windows 7 or did it change later on?


it seems to have a stable release number but is still under development. Is it been reviewed at the moment to go onto the main add on list? or are bugs etc still be ironed out?


The add on I am referring to can be found at https://addons.nvda-project.org/addons/windowsMagnifier.en.html

 Has any one used it with the mouse and did they have any problems like windows locking up? or any ting like that.


There may be some members who could benefit from this add on when it gets released to the main list.


I was also wondering there may be others on this list who do not know about it and may help them.


Gene nz

Hi, and thanks for replying. In 2 other screen readers I have there are hot keys for raising and lowering the speed of speech, without going into menus, etc.
How about NVDA? If so, I just plain missed them.
-- Curtis Delzer
HS
K 6 V F O
Rialto, CA

curtis@calweb.com

Hi all,

Add-on Updater 20.05 is now available. This version adds update check capability for the following add-ons:

• Kill NVDA
• NV Speech Player
• OCR
• Phonetic Punctuation
• Time Zoner
• Tony’s Enhancements

If you are using any of these add-ons, be sure to install Add-on Updater 20.05 and check for add-on updates so you may get latest releases.

Cheers,

Joseph

Hi Group,

Maybe if he could record the IOS sound scheme individual file by individual file and then move them somehow to the PC and rename them to conform to NVDA wave file names in the NVDA\Waves folder and paste the converted and renamed files into that folder, he could achieve what he wants.  Personally, I like the original NVDA sound scheme better than anything I have herd so far.  I did not like the new sound scheme that was proposed and then dropped for 2018 releases.  I got a copy of those sound files, copied them into the folder with the default wave files and had it that way for about a day. I over wrote them with the original sound files a day later because I simply didn't like the change.

On 4/22/2020 3:48 PM, Brian Vogel wrote:

On Wed, Apr 22, 2020 at 03:44 PM, Gerardo Corripio wrote:

I’m wanting a package that would have iOS sounds for the NVDA [Audio Themes Add-on]

Yes, and that's what I finally figured out you were probably making reference to.  Unless someone has created one, and sees your request, I can find absolutely nothing "out there on the web" that indicates such exists and is available for download.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Science has become just another voice in the room; it has lost its platform.  Now, you simply declare your own truth.

      ~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine Sentiment Took Hold in the United States, September 23, 2019

 

 

-- 
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"

Hi,

Called synth settings ring, and on desktop layout, Control+NVDA+arrow keys (left/right to move between settings, up/down arrow to change settings).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sarah k Alawami
Sent: Wednesday, April 22, 2020 3:34 PM
To: NVDA discussion <nvda@nvda.groups.io>
Subject: Re: [nvda] are there hot keys for raising and lowering speed of speech?

 

Use the voice ring, nvda control shift left right and up down arrows, I think. I'm in laptop mode but consult the quick start guide to know the keyboard commands for the voice ring. I don't know if this is what it is called in the manual but hope that helps a bit.

Blessings and happy Wednesday

Sarah Alawami, owner of TFFP. . For more info go to our website.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on [twitch.](http://twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page YOu will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 22 Apr 2020, at 15:13, Curtis Delzer wrote:

Hi, and thanks for replying. In 2 other screen readers I have there are hot keys for raising and lowering the speed of speech, without going into menus, etc.
How about NVDA? If so, I just plain missed them.
--
Curtis Delzer
HS
K 6 V F O
Rialto, CA

curtis@...

Hi, and thanks for replying. In 2 other screen readers I have there are hot keys for raising and lowering the speed of speech, without going into menus, etc.
How about NVDA? If so, I just plain missed them.
--
Curtis Delzer
HS
K 6 V F O
Rialto, CA

curtis@...

Also, if it's an iOS audio theme for the Audio Themes add-on you're looking for, I can't find one on the GitHub page or elsewhere via web search.
It is entirely possible that someone has created one, but as you've requested, they'd have to share it here.  And it's fine to do so if we're talking about a audio theme of any sort that can be used with the Audio Themes Add-On.
--
Brian *-*Windows 10 Pro, 64-Bit, Version 1909, Build 18363
*/Science has become just another voice in the room; it has lost its platform.  Now, you simply declare your own truth./*
~ Dr. Paul A. Offit, in /New York Times/ article, /How Anti-Vaccine Sentiment Took Hold in the United States/ <https://www.nytimes.com/2019/09/23/health/anti-vaccination-movement-us.html>/,/September 23, 2019

Gerardo,
              That would be because this is an NVDA add-on, and, thus, only for the PC platform.  The developer's e-mail address is listed on the very webpage you make reference to, and contacting him would be the appropriate next step.  I very much doubt that there is a version of this for iPhone, but only he can answer that.
               As a note for the future, general questions relating to iPhone apps are off topic for the group, though I can see why you asked this one specifically, as someone appears to have stated that there is an iPhone equivalent of the NVDA Add-On.  There is no evidence of that at the add-on developer's GitHub page.
--
Brian *-*Windows 10 Pro, 64-Bit, Version 1909, Build 18363
*/Science has become just another voice in the room; it has lost its platform.  Now, you simply declare your own truth./*
~ Dr. Paul A. Offit, in /New York Times/ article, /How Anti-Vaccine Sentiment Took Hold in the United States/ <https://www.nytimes.com/2019/09/23/health/anti-vaccination-movement-us.html>/,/September 23, 2019