Date   

notification staying in nvda

 

Hi all.

Just noticed this in the 2019.3 version of nvda.

I am using latest windows 19.9 build 815, I have noticed that when you get either a notification from windows security or something in start or get any notification at all, that has it up in a window, then you go to activation centre to clear it, while it clears there is a notification window which is empty by the way just staying there on screen.

Restarting nvda doesn't usually fix it and I have to reboot to make the thing stop.

Nvda states in the log that it is a os error and a live region error.

Fragment follows

ERROR - NVDAObjects.behaviors.LiveText._monitor (08:20:07.575) - Dynamic_KeyboardHandlerBasedTypedCharSupportWinConsoleIAccessibleWindowNVDAObject._monitorThread (3780):
Error getting initial lines
Traceback (most recent call last):
  File "NVDAObjects\behaviors.pyc", line 288, in _monitor
  File "NVDAObjects\window\winConsole.pyc", line 73, in _getTextLines
  File "winConsoleHandler.pyc", line 127, in getConsoleVisibleLines
  File "wincon.pyc", line 77, in GetConsoleScreenBufferInfo
OSError: [WinError 6] The handle is invalid.
ERROR - unhandled exception (08:25:38.206) - MainThread (4452):
Traceback (most recent call last):
  File "wx\core.pyc", line 3240, in <lambda>
  File "browseMode.pyc", line 469, in run
  File "browseMode.pyc", line 934, in __init__
  File "browseMode.pyc", line 992, in initElementType
  File "browseMode.pyc", line 1012, in filter
  File "virtualBuffers\__init__.pyc", line 123, in label
  File "browseMode.pyc", line 232, in _getLabelForProperties
  File "virtualBuffers\__init__.pyc", line 120, in propertyGetter
  File "virtualBuffers\__init__.pyc", line 149, in _getControlFieldAttribs
LookupError
ERROR - speech.manager.SpeechManager._handleIndex (08:26:02.645) - MainThread (4452):
Error running speech callback
Traceback (most recent call last):
  File "speech\manager.pyc", line 404, in _handleIndex
  File "speech\commands.pyc", line 260, in run
  File "sayAllHandler.pyc", line 145, in <lambda>
  File "sayAllHandler.pyc", line 174, in lineReached
  File "documentBase.pyc", line 24, in makeTextInfo
  File "virtualBuffers\__init__.pyc", line 207, in __init__
  File "textInfos\offsets.pyc", line 460, in __init__
  File "virtualBuffers\__init__.pyc", line 225, in _getStoryLength
OSError: [WinError 1775] A null context handle was passed from the client to the host during a remote procedure call

Is this an issue with windows or an nvda issue.

If this is a issue with windows does it exist on the 2004 rc at this time or not.

If not then  I will just update when it comes time to do so as usual.

Its not a big showstopper but I have had it appear on multiple devices, on builds of windows 10 from 1903 up and I have seen it on 18 xx builds to.

Not as much but it does happen.

I think it has to do with if the notification is focused or not but mostly I don't even dismiss the notifications or move them to action centre, I just clear them out after reading.

I guess I could just turn them all off but if I do that I won't get messages and that could be a problem in of itself.


Re: Torrents in QBitTorrent, or other accessible torrent clients.

Sascha Cowley
 

I personally use Transmission. The only issue I really have with it is that the only thing that is read in the torrent list is the torrent name. However, if you use OCR while the list item is highlighted, you can read the download progress.

On 24/04/2020 04:00, John Isige wrote:
Hi all. I'm back with another question.


I've been using QBitTorrent for torrents, but so far as I can tell, the list of torrents is inaccessible. So I've been using the web interface. While that's accessible, my problem is this. Say I have, I dunno, twelve torrents going. I want to delete seven of them. In the web interface, I have to pick one, delete it, pick another one, delete it, and so on. Is there a way to do this in QBitTorrent itself, so I can pick multiple torrents and just delete them? Ideally it would also ask me if I wanted to delete the actual data or not.


Alternatively, can anybody recommend another client that's accessible? I was using utorrent/mu torrent, whatever it's called, but one place I check doesn't like it anymore because it has some sort of security issue or something. That's why I switched to QBitTorrent. It wasn't really accessible either. You'd think a list box wouldn't be that hard but apparently torrent client designers like to make them non-standard or something. So if anybody's got something really accessible, I'd love to know about it. Maybe that is QBitTorrent and I'm just missing something.



Re: Using iTunes under Windows to transfer files to/from the iPhone

 

I've retitled the topic so it might get additional attention.  If someone can't help you here, consider asking on the PhonesForTheBlind group, as there are a lot of iPhone users there and iTunes has been discussed relatively frequently.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Science has become just another voice in the room; it has lost its platform.  Now, you simply declare your own truth.

      ~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine Sentiment Took Hold in the United States, September 23, 2019

 

 


Re: Converting JAWS Dictionaries

Bernd Dorer
 

Hi, may someone could write this as an Add-on for NVDA? This would be really cool!


kind regards
Bernd
Am 23.04.2020 um 19:52 schrieb Brian Vogel:

Pele,

           If you happen to know Linux/Unix, the awk command will be very easy to use to do the conversion.

A JAWS dictionary line has the fields, in order:  Actual word|Replacement Word|Language (0x09-English)|Synthesizer|Voice|Language (0 is default)|Case sensitive (0 - No, 1 -Yes)
For the JAWS dictionary, the fields themselves are DOT enclosed/separated, UNLESS, the actual word starts with a dot, in which case it's a comma used for the separator.

The NVDA dictionary file layout is simpler, and the fields are tab separated.  The first field does not have a separator before it.  They are arranged as:
Matching word or regular expression|Replacement|Case Sensitivity (0 - no, 1 - yes)|Type (2 - Whole Word, 1 - Regular Expression, 0 - Anywhere)|Comment (All comments are pre-pended with a #

For both dictionaries, there is a single entry per line of the file.

Have fun with it.  It doesn't appear to be particularly complicated.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Science has become just another voice in the room; it has lost its platform.  Now, you simply declare your own truth.

      ~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine Sentiment Took Hold in the United States, September 23, 2019

 

 



Re: A question about Vocalizer

Bob Jutzi
 

Not sure as I purchased the Eloquence-vocalizer add-in last month.

On 4/23/2020 1:15 PM, Jesse Farquharson wrote:

From what I understand Code Factory isn't maintaining Eloquence anymore. Is that right?



Torrents in QBitTorrent, or other accessible torrent clients.

John Isige
 

Hi all. I'm back with another question.


I've been using QBitTorrent for torrents, but so far as I can tell, the list of torrents is inaccessible. So I've been using the web interface. While that's accessible, my problem is this. Say I have, I dunno, twelve torrents going. I want to delete seven of them. In the web interface, I have to pick one, delete it, pick another one, delete it, and so on. Is there a way to do this in QBitTorrent itself, so I can pick multiple torrents and just delete them? Ideally it would also ask me if I wanted to delete the actual data or not.


Alternatively, can anybody recommend another client that's accessible? I was using utorrent/mu torrent, whatever it's called, but one place I check doesn't like it anymore because it has some sort of security issue or something. That's why I switched to QBitTorrent. It wasn't really accessible either. You'd think a list box wouldn't be that hard but apparently torrent client designers like to make them non-standard or something. So if anybody's got something really accessible, I'd love to know about it. Maybe that is QBitTorrent and I'm just missing something.


Using iTunes under Windows to transfer files to/from the iPhone

anthony borg
 

Hi folks

Quik question, does anyone can explain to me how to transfer a file from the
laptop to the iphone via windos itunes?
Thanks in advance

Anthony


Re: Converting JAWS Dictionaries

 

Pele,

           If you happen to know Linux/Unix, the awk command will be very easy to use to do the conversion.

A JAWS dictionary line has the fields, in order:  Actual word|Replacement Word|Language (0x09-English)|Synthesizer|Voice|Language (0 is default)|Case sensitive (0 - No, 1 -Yes)
For the JAWS dictionary, the fields themselves are DOT enclosed/separated, UNLESS, the actual word starts with a dot, in which case it's a comma used for the separator.

The NVDA dictionary file layout is simpler, and the fields are tab separated.  The first field does not have a separator before it.  They are arranged as:
Matching word or regular expression|Replacement|Case Sensitivity (0 - no, 1 - yes)|Type (2 - Whole Word, 1 - Regular Expression, 0 - Anywhere)|Comment (All comments are pre-pended with a #

For both dictionaries, there is a single entry per line of the file.

Have fun with it.  It doesn't appear to be particularly complicated.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Science has become just another voice in the room; it has lost its platform.  Now, you simply declare your own truth.

      ~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine Sentiment Took Hold in the United States, September 23, 2019

 

 


Re: Converting JAWS Dictionaries

Pele West
 

hi Brian

Thanks for writing.

As you say it is so easy, I will have a go at converting the
dictionaries myself.

Pele


Re: A question about Vocalizer

Jesse Farquharson
 

From what I understand Code Factory isn't maintaining Eloquence anymore. Is that right?


Re: Converting JAWS Dictionaries

 

Pele,

            None that I know of.  But the structure of the NVDA dictionary files is very, very simple.  If you happen to have a JAWS dictionary file that you can e-mail me as an attachment, I might be able to whip something up, though I won't guarantee it.  I don't know how Freedom Scientific lays out the JAWS dictionary files, and that's where the sticking point might be.  But if they're plain text like the NVDA dictionaries are, it shouldn't be all that difficult to figure out how to convert.

            It's going to be a long, rainy day here, so this might be a fun task to try.  By the way, anyone who has a JAWS dictionary file they're willing to share should feel free to e-mail it to me as an attachment using the Reply to Sender link at the end of this message.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Science has become just another voice in the room; it has lost its platform.  Now, you simply declare your own truth.

      ~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine Sentiment Took Hold in the United States, September 23, 2019

 

 


Re: A question about Vocalizer

Sylvie Duchateau
 

Hello,

In addition to what Rui said, from a non commercial point of view, it depends on what you are looking for.

As I work in different languages, English, French, German, after I have tested both products, I prefer using Tiflotecnia's voices, as language switching works fine.

I also had the impression that the voices from code factory were less responsive.

If you like the eloquence synthesiser, you'd better take Code Factory's solution as you get the eloquence voices and the nuance voices.

Best

Sylvie

Le 23/04/2020 à 16:30, Rui Fontes a écrit :

Hello!


The makers are Tiflotecnia, my company, and CodeFactory...


We have a better technical support and a better automatic language switching...


They have more languages and voices... at least untill now...


Best regards,


Customer support

Tiflotecnia, Lda.


Às 01:36 de 23/04/2020, Jesse Farquharson escreveu:

Hello folks, quick question.

What is the difference between the two commercially available Vocalizer synths for NVDA? Sorry, I can't recall the sellers off the top of my head.

Thanks in advance.


Re: A question about Vocalizer

Rui Fontes
 

Hello!


The makers are Tiflotecnia, my company, and CodeFactory...


We have a better technical support and a better automatic language switching...


They have more languages and voices... at least untill now...


Best regards,


Customer support

Tiflotecnia, Lda.


Às 01:36 de 23/04/2020, Jesse Farquharson escreveu:

Hello folks, quick question.

What is the difference between the two commercially available Vocalizer synths for NVDA? Sorry, I can't recall the sellers off the top of my head.

Thanks in advance.


Re: Unspoken Add-On, Ported to python 3, compatible with NVDA 2019.3 & later #addonrelease

yunus Emre
 

Awesome work, was waiting for that. Time to upgrade NVDA.


Converting JAWS Dictionaries

Pele West
 

Hi Everyone

Is there a way of converting JAWS Pronunciation dictionaries to NVDA
dictionaries?

Thanks

Pele West


Re: NVDA voice profiles are not functioning in latest NVDA after changing synthesizer

Quentin Christensen
 

Once you adjusted the volume does the voice behave ok?

I don't have any SAPI 4 voices anymore to check.

On Thu, Apr 23, 2020 at 4:15 PM Sandesh computer trainer HR <rh.sandesh@...> wrote:
HI friend,
By using Narrator I have did above settings which you have mention.
But Microsoft AP 4 is not working.

Now reinstall NVDA and change the synthesizer from E-speak to
Microsoft AP 4. Immediately NVDA was working without voice. Later I
have  checked in volume control. NVDA volume was 0. Later increase it.


Look like Microsoft AP 4 has few issues with NVDA of latest version.


With regards,
Sandesh HR
On 4/23/20, Quentin Christensen <quentin@...> wrote:
> Can you both please clarify exactly which voices / synthesizers you are
> using?  Sandesh, I'm not familiar with a synth called "AP4", but did you
> mean SAPI 4"?
>
> It sounds like you managed to get back to a voice you can use, but if you
> do set the synthesizer to something which doesn't work, two ways to
> overcome it are:
>
> 1) Revert NVDA to the last saved configuration by pressing NVDA+CONTROL+R.
> If all else fails, pressing this three times quickly will reset NVDA back
> to factory settings.
>
> 2) Or you can change the synthesizer again, if you are happy to try doing
> so without speech:
> - Press NVDA+CONTROL+S to open the synthesizer dialog
> - Press W for Windows OneCore voices or E for eSpeak-NG.
> - Press ENTER.  The new synthesizer should load and start speaking.
>
> Note that this assumes Windows OneCore is the only (or at least first
> alphabetically) synthesizer beginning with W and eSpeak NG is the only or
> first beginning with E.
>
> Regards
>
> Quentin.
>
> On Wed, Apr 22, 2020 at 2:06 PM Robert Doc Wright godfearer <
> godfearer@...> wrote:
>
>> I have had a similar problem. When I switch to Sapi5 I get silence.
>> ESpeak
>> and ?windows core are fine.
>> ******
>> If we don't take time to think before we speak we may find ourselves in a
>> situation where our speech becomes a bit stinky!
>> ----- Original Message -----
>> From: "Sandesh computer trainer HR" <rh.sandesh@...>
>> To: "nvda" <nvda@nvda.groups.io>
>> Sent: Tuesday, April 21, 2020 7:43 PM
>> Subject: [nvda] NVDA voice profiles are not functioning in latest NVDA
>> after
>> changing synthesizer
>>
>>
>> > Hi friends,
>> > Seeking your assistance to resolve below NVDA strange problem.
>> > I have updated to latest version NVDA.
>> > Soon after I have change synthesizer  A P 4. Later I have exit the
>> > NVDA.
>> > While verifying NVDA features. I have reactivated NVDA through short
>> > key.
>> > Unable to hear the NVDA voice.
>> > I have reinstalled NVDA yesterday twice.
>> > Still I am unable to listen NVDA voices.
>> >
>> > With regards,
>> > Sandesh HR
>> >
>> >
>> >
>> >
>>
>>
>>
>>
>>
>
> --
> Quentin Christensen
> Training and Support Manager
>
> Web: www.nvaccess.org
> Training: https://www.nvaccess.org/shop/
> Certification: https://certification.nvaccess.org/
> User group: https://nvda.groups.io/g/nvda
> Facebook: http://www.facebook.com/NVAccess
> Twitter: @NVAccess <https://twitter.com/NVAccess>
>
>
>
>





--
Quentin Christensen
Training and Support Manager


Re: NVDA voice profiles are not functioning in latest NVDA after changing synthesizer

Sandesh computer trainer HR
 

HI friend,
By using Narrator I have did above settings which you have mention.
But Microsoft AP 4 is not working.

Now reinstall NVDA and change the synthesizer from E-speak to
Microsoft AP 4. Immediately NVDA was working without voice. Later I
have checked in volume control. NVDA volume was 0. Later increase it.


Look like Microsoft AP 4 has few issues with NVDA of latest version.


With regards,
Sandesh HR

On 4/23/20, Quentin Christensen <quentin@nvaccess.org> wrote:
Can you both please clarify exactly which voices / synthesizers you are
using? Sandesh, I'm not familiar with a synth called "AP4", but did you
mean SAPI 4"?

It sounds like you managed to get back to a voice you can use, but if you
do set the synthesizer to something which doesn't work, two ways to
overcome it are:

1) Revert NVDA to the last saved configuration by pressing NVDA+CONTROL+R.
If all else fails, pressing this three times quickly will reset NVDA back
to factory settings.

2) Or you can change the synthesizer again, if you are happy to try doing
so without speech:
- Press NVDA+CONTROL+S to open the synthesizer dialog
- Press W for Windows OneCore voices or E for eSpeak-NG.
- Press ENTER. The new synthesizer should load and start speaking.

Note that this assumes Windows OneCore is the only (or at least first
alphabetically) synthesizer beginning with W and eSpeak NG is the only or
first beginning with E.

Regards

Quentin.

On Wed, Apr 22, 2020 at 2:06 PM Robert Doc Wright godfearer <
godfearer@comcast.net> wrote:

I have had a similar problem. When I switch to Sapi5 I get silence.
ESpeak
and ?windows core are fine.
******
If we don't take time to think before we speak we may find ourselves in a
situation where our speech becomes a bit stinky!
----- Original Message -----
From: "Sandesh computer trainer HR" <rh.sandesh@gmail.com>
To: "nvda" <nvda@nvda.groups.io>
Sent: Tuesday, April 21, 2020 7:43 PM
Subject: [nvda] NVDA voice profiles are not functioning in latest NVDA
after
changing synthesizer


Hi friends,
Seeking your assistance to resolve below NVDA strange problem.
I have updated to latest version NVDA.
Soon after I have change synthesizer A P 4. Later I have exit the
NVDA.
While verifying NVDA features. I have reactivated NVDA through short
key.
Unable to hear the NVDA voice.
I have reinstalled NVDA yesterday twice.
Still I am unable to listen NVDA voices.

With regards,
Sandesh HR






--
Quentin Christensen
Training and Support Manager

Web: www.nvaccess.org
Training: https://www.nvaccess.org/shop/
Certification: https://certification.nvaccess.org/
User group: https://nvda.groups.io/g/nvda
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess <https://twitter.com/NVAccess>;




Re: NVDA voice profiles are not functioning in latest NVDA after changing synthesizer

Quentin Christensen
 

Can you both please clarify exactly which voices / synthesizers you are using?  Sandesh, I'm not familiar with a synth called "AP4", but did you mean SAPI 4"?

It sounds like you managed to get back to a voice you can use, but if you do set the synthesizer to something which doesn't work, two ways to overcome it are:

1) Revert NVDA to the last saved configuration by pressing NVDA+CONTROL+R.  If all else fails, pressing this three times quickly will reset NVDA back to factory settings.

2) Or you can change the synthesizer again, if you are happy to try doing so without speech:
- Press NVDA+CONTROL+S to open the synthesizer dialog
- Press W for Windows OneCore voices or E for eSpeak-NG.
- Press ENTER.  The new synthesizer should load and start speaking.

Note that this assumes Windows OneCore is the only (or at least first alphabetically) synthesizer beginning with W and eSpeak NG is the only or first beginning with E.

Regards

Quentin.

On Wed, Apr 22, 2020 at 2:06 PM Robert Doc Wright godfearer <godfearer@...> wrote:
I have had a similar problem. When I switch to Sapi5 I get silence. ESpeak
and ?windows core are fine.
******
If we don't take time to think before we speak we may find ourselves in a
situation where our speech becomes a bit stinky!
----- Original Message -----
From: "Sandesh computer trainer HR" <rh.sandesh@...>
To: "nvda" <nvda@nvda.groups.io>
Sent: Tuesday, April 21, 2020 7:43 PM
Subject: [nvda] NVDA voice profiles are not functioning in latest NVDA after
changing synthesizer


> Hi friends,
> Seeking your assistance to resolve below NVDA strange problem.
> I have updated to latest version NVDA.
> Soon after I have change synthesizer  A P 4. Later I have exit the NVDA.
> While verifying NVDA features. I have reactivated NVDA through short key.
> Unable to hear the NVDA voice.
> I have reinstalled NVDA yesterday twice.
> Still I am unable to listen NVDA voices.
>
> With regards,
> Sandesh HR
>
>
>
>






--
Quentin Christensen
Training and Support Manager


Re: Forcing NVDA Find versus Browser Find

Quentin Christensen
 

If anyone experiencing this is willing to, what might really help here is a copy of an NVDA lot set to debug level.  If sent to the list it will need to be in the body of an email, or you can email it to me at info@... (with a brief description please, so I know what the log is about!).

Kind regards

Quentin.

On Wed, Apr 22, 2020 at 2:40 AM Sarah k Alawami <marrie12@...> wrote:

I'm not 100 percent positive, but I think i have seen this once or twice in browse mode. I usually toggle between the two modes then it works for a few weeks and I normally forget about it until it happens when I don't want it to, like when I edit a stream title, look for my briefing, search for something on froogle, etc. I think I've seen this on discord actually but like I said, it happens so rarely, I can't really begin to recognize a pattern.

Sarah Alawami, owner of TFFP. . For more info go to our website.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on [twitch.](http://twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page YOu will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 21 Apr 2020, at 9:27, Nimer Jaber wrote:

I have never seen this when Browse mode is on.

Thanks.

On Tue, Apr 21, 2020 at 8:56 AM Sarah k Alawami <marrie12@...> wrote:

I will sometimes have this issue on twitch and even sometimes google and most websites. I think this might have started with nvda 19.3.x.

Sarah Alawami, owner of TFFP. . For more info go to our website.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on [twitch.](http://twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page YOu will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 21 Apr 2020, at 8:34, Gene wrote:

The question needs more discussion.  Is this a problem with new versions of NVDA, perhaps after the change to the new version of Python or has it been going on for some time?  and is thisw a very limited problem or more widespread?  Also, does it only affect Windows 10 users or other users?
 
Gene
----- Original Message -----
Sent: Tuesday, April 21, 2020 10:26 AM
Subject: Re: [nvda] Forcing NVDA Find versus Browser Find
 
Chris,

           As someone else said recently, there is a certain comfort in knowing that a given issue is not limited strictly to yourself!  Thanks for reporting.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Science has become just another voice in the room; it has lost its platform.  Now, you simply declare your own truth.

      ~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine Sentiment Took Hold in the United States, September 23, 2019

 

 



--
Best,

Nimer Jaber

The message above is intended for the recipient to whom it was
addressed. If you believe that you are not the intended recipient,
please notify me via reply email and destroy all copies of this
correspondence. Action taken as a result of this email or its contents
by anyone other than the intended recipient(s) may result in civil or
criminal charges. I have checked this email and all corresponding
attachments for security threats. However, security of your machine is
up to you. Thanks.

Registered Linux User 529141.
http://counter.li.org/

To find out about a free, open-source, and versatile screen reader for Windows, visit nvaccess.org

You can follow @nimerjaber on Twitter for the latest technology news.

To contact me, you can reply to this email or you may call me at (970) (393-4481) and I will do my best to respond to you promptly.

Thank you, and have a great day!



--
Quentin Christensen
Training and Support Manager


Re: Windows magnifier

Eilana Benish
 

the addon works great on my system - windows 10 the latest version

 

 

ובכבוד רב | Sincerely,

אילנה בניש מורשה נגישות שירות 2200 | Eilana Benish, service Accessibility authorized (2200)

ניהול פרויקטים – נגישות ושמישות אינטרנט וטכנולוגיות מידע  | Projects manager – Accessibility & usability on internet and ICT

📱 +972-50-7100367 | 📧 benish.ilana@...  

נכתב על ידי Sascha Cowley via groups.io, ב־17/04/2020 בשעה 05:24:

I played with it a few weeks back, but ultimately removed the addon as it crashed NVDA too often.

On 17/04/2020 12:13, hurrikennyandopo ... wrote:
Hi guys



I was browsing the under development section and saw the add on for Windows magnifier. I knew there was one for windows 7 but no higher back then.


it looks as though this will work on windows 10

I seen this add on a little while back on the section under development.


has any one who has a bit more sight have a play with this add on and how well did it work?


I saw it when installed went up to 16 times magnification in Windows I thought it used to only be like 4 times at one time maybe windows 7 or did it change later on?


it seems to have a stable release number but is still under development. Is it been reviewed at the moment to go onto the main add on list? or are bugs etc still be ironed out?


The add on I am referring to can be found at https://addons.nvda-project.org/addons/windowsMagnifier.en.html

 Has any one used it with the mouse and did they have any problems like windows locking up? or any ting like that.


There may be some members who could benefit from this add on when it gets released to the main list.


I was also wondering there may be others on this list who do not know about it and may help them.


Gene nz








8201 - 8220 of 81044