I use Pontes Media Downloader regularly, and it works very well.

I downloaded a video this morning.

Do you have the latest download?

Thanks a bunch.

Thanks a bunch.

There is an option to delete all thiles control shift and backspace.

its in the menus to.

You should select the source you want before you convert to whatever you want, I usually select the lowest source audio as it will play fine no matter what it is.

It can crash with some settings but its ok.

Greetings all,

I am not sure who recommended Pontes Media downloader.  But hit is been awesome.  however, I have been having a little issue lately.  I am using version 3.0.

1.        How do I get Pontes to empty the table of past url’s?

2.       2.  Sometimes when pasting the url from youtube into the url field for downloading, then tabbing to the download button and pressing enter on it, the file doesn’t always download.

3.       I go back to check the url field and find it is empty.  But one more shift tab back there is a list of past download url’s.

4.       I tried copying and pasting the shortcut listing with no luck. NVDA will read me the first column but not what that keystroke does in the second column.

5.       How can I get the complete table to copy to the clipboard to paste into Word and save.

6.        

7.       I have had great success with Pontes.  But lately, It takes a few times getting the file.  I am went through the program options and think all is set right.  I genuine thank anyone for some directions.  I send a song out with each of my daily devotions and rely heavily on the awesome program…  Blessings in any of

 

Subscribe to the Fresh Start Daily Devotion by sending a message to the e-mail address shown below with subscribe in the subject field.

dan@...

 

Unsubscribe from the Fresh Start Daily Devotion by sending a message to the e-mail address shown below with unsubscribe in the subject field.

dan@...

“Trust in the LORD with all your heart And do not lean on your own understanding.  In all your ways acknowledge Him, And He will make your paths straight.”

(Proverbs 3:5,6 NIV)

 

That’s what I thought. I did not uninstall and reinstall. I’ll just wait for the developers to update it.

Sent from Mail for Windows 10

Hi Dan/Fresh Start,

Pontes must be updated before it works properly again.  Every now and then, Youtube grows wise to Pontes and similar programs.  They change something in the download logarithm that makes Pontes not work so well.  Sometimes this issue is caused by a JAVA update.  If JAVA causes the issue, all you need do is uninstall and reinstall Pontes--being sure to delete all associated folders.  But I already tried that and it still is having issues.  You will have to wait until Pontes developers update the program.

...And you are sending out a 'pirated song' with every daily devotion--HMMMMMM! Interesting!

Greetings all,

I am not sure who recommended Pontes Media downloader.  But hit is been awesome.  however, I have been having a little issue lately.  I am using version 3.0.

1.        How do I get Pontes to empty the table of past url’s?

2.       2.  Sometimes when pasting the url from youtube into the url field for downloading, then tabbing to the download button and pressing enter on it, the file doesn’t always download.

3.       I go back to check the url field and find it is empty.  But one more shift tab back there is a list of past download url’s.

4.       I tried copying and pasting the shortcut listing with no luck. NVDA will read me the first column but not what that keystroke does in the second column.

5.       How can I get the complete table to copy to the clipboard to paste into Word and save.

6.        

7.       I have had great success with Pontes.  But lately, It takes a few times getting the file.  I am went through the program options and think all is set right.  I genuine thank anyone for some directions.  I send a song out with each of my daily devotions and rely heavily on the awesome program…  Blessings in any of

 

Subscribe to the Fresh Start Daily Devotion by sending a message to the e-mail address shown below with subscribe in the subject field.

dan@...

 

Unsubscribe from the Fresh Start Daily Devotion by sending a message to the e-mail address shown below with unsubscribe in the subject field.

dan@...

“Trust in the LORD with all your heart And do not lean on your own understanding.  In all your ways acknowledge Him, And He will make your paths straight.”

(Proverbs 3:5,6 NIV)

 

-- 

They Ask Me If I'm Happy; I say Yes.

They ask: "How Happy are You?"

I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"

Hi Dan/Fresh Start,

Pontes must be updated before it works properly again.  Every now and then, Youtube grows wise to Pontes and similar programs.  They change something in the download logarithm that makes Pontes not work so well.  Sometimes this issue is caused by a JAVA update.  If JAVA causes the issue, all you need do is uninstall and reinstall Pontes--being sure to delete all associated folders.  But I already tried that and it still is having issues.  You will have to wait until Pontes developers update the program.

...And you are sending out a 'pirated song' with every daily devotion--HMMMMMM! Interesting!

Greetings all,

I am not sure who recommended Pontes Media downloader.  But hit is been awesome.  however, I have been having a little issue lately.  I am using version 3.0.

1.        How do I get Pontes to empty the table of past url’s?

2.       2.  Sometimes when pasting the url from youtube into the url field for downloading, then tabbing to the download button and pressing enter on it, the file doesn’t always download.

3.       I go back to check the url field and find it is empty.  But one more shift tab back there is a list of past download url’s.

4.       I tried copying and pasting the shortcut listing with no luck. NVDA will read me the first column but not what that keystroke does in the second column.

5.       How can I get the complete table to copy to the clipboard to paste into Word and save.

6.        

7.       I have had great success with Pontes.  But lately, It takes a few times getting the file.  I am went through the program options and think all is set right.  I genuine thank anyone for some directions.  I send a song out with each of my daily devotions and rely heavily on the awesome program…  Blessings in any of

 

Subscribe to the Fresh Start Daily Devotion by sending a message to the e-mail address shown below with subscribe in the subject field.

dan@...

 

Unsubscribe from the Fresh Start Daily Devotion by sending a message to the e-mail address shown below with unsubscribe in the subject field.

dan@...

“Trust in the LORD with all your heart And do not lean on your own understanding.  In all your ways acknowledge Him, And He will make your paths straight.”

(Proverbs 3:5,6 NIV)

 

-- 

They Ask Me If I'm Happy; I say Yes.

They ask: "How Happy are You?"

I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"

There is an option to delete all thiles control shift and backspace.

its in the menus to.

You should select the source you want before you convert to whatever you want, I usually select the lowest source audio as it will play fine no matter what it is.

It can crash with some settings but its ok.

Greetings all,

I am not sure who recommended Pontes Media downloader.  But hit is been awesome.  however, I have been having a little issue lately.  I am using version 3.0.

1.        How do I get Pontes to empty the table of past url’s?

2.       2.  Sometimes when pasting the url from youtube into the url field for downloading, then tabbing to the download button and pressing enter on it, the file doesn’t always download.

3.       I go back to check the url field and find it is empty.  But one more shift tab back there is a list of past download url’s.

4.       I tried copying and pasting the shortcut listing with no luck. NVDA will read me the first column but not what that keystroke does in the second column.

5.       How can I get the complete table to copy to the clipboard to paste into Word and save.

6.        

7.       I have had great success with Pontes.  But lately, It takes a few times getting the file.  I am went through the program options and think all is set right.  I genuine thank anyone for some directions.  I send a song out with each of my daily devotions and rely heavily on the awesome program…  Blessings in any of

 

Subscribe to the Fresh Start Daily Devotion by sending a message to the e-mail address shown below with subscribe in the subject field.

dan@...

 

Unsubscribe from the Fresh Start Daily Devotion by sending a message to the e-mail address shown below with unsubscribe in the subject field.

dan@...

“Trust in the LORD with all your heart And do not lean on your own understanding.  In all your ways acknowledge Him, And He will make your paths straight.”

(Proverbs 3:5,6 NIV)

 

Hi Dan/Fresh Start,

Pontes must be updated before it works properly again.  Every now and then, Youtube grows wise to Pontes and similar programs.  They change something in the download logarithm that makes Pontes not work so well.  Sometimes this issue is caused by a JAVA update.  If JAVA causes the issue, all you need do is uninstall and reinstall Pontes--being sure to delete all associated folders.  But I already tried that and it still is having issues.  You will have to wait until Pontes developers update the program.

...And you are sending out a 'pirated song' with every daily devotion--HMMMMMM! Interesting!

On 4/30/2020 10:16 AM, Fresh Start wrote:

Greetings all,

I am not sure who recommended Pontes Media downloader.  But hit is been awesome.  however, I have been having a little issue lately.  I am using version 3.0.

1.        How do I get Pontes to empty the table of past url’s?

2.       2.  Sometimes when pasting the url from youtube into the url field for downloading, then tabbing to the download button and pressing enter on it, the file doesn’t always download.

3.       I go back to check the url field and find it is empty.  But one more shift tab back there is a list of past download url’s.

4.       I tried copying and pasting the shortcut listing with no luck. NVDA will read me the first column but not what that keystroke does in the second column.

5.       How can I get the complete table to copy to the clipboard to paste into Word and save.

6.        

7.       I have had great success with Pontes.  But lately, It takes a few times getting the file.  I am went through the program options and think all is set right.  I genuine thank anyone for some directions.  I send a song out with each of my daily devotions and rely heavily on the awesome program…  Blessings in any of

 

Subscribe to the Fresh Start Daily Devotion by sending a message to the e-mail address shown below with subscribe in the subject field.

dan@...

 

Unsubscribe from the Fresh Start Daily Devotion by sending a message to the e-mail address shown below with unsubscribe in the subject field.

dan@...

“Trust in the LORD with all your heart And do not lean on your own understanding.  In all your ways acknowledge Him, And He will make your paths straight.”

(Proverbs 3:5,6 NIV)

 

-- 
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"

Greetings all,

I am not sure who recommended Pontes Media downloader.  But hit is been awesome.  however, I have been having a little issue lately.  I am using version 3.0.

1.        How do I get Pontes to empty the table of past url’s?

2.       2.  Sometimes when pasting the url from youtube into the url field for downloading, then tabbing to the download button and pressing enter on it, the file doesn’t always download.

3.       I go back to check the url field and find it is empty.  But one more shift tab back there is a list of past download url’s.

4.       I tried copying and pasting the shortcut listing with no luck. NVDA will read me the first column but not what that keystroke does in the second column.

5.       How can I get the complete table to copy to the clipboard to paste into Word and save.

6.        

7.       I have had great success with Pontes.  But lately, It takes a few times getting the file.  I am went through the program options and think all is set right.  I genuine thank anyone for some directions.  I send a song out with each of my daily devotions and rely heavily on the awesome program…  Blessings in any of

 

Subscribe to the Fresh Start Daily Devotion by sending a message to the e-mail address shown below with subscribe in the subject field.

dan@...

 

Unsubscribe from the Fresh Start Daily Devotion by sending a message to the e-mail address shown below with unsubscribe in the subject field.

dan@...

“Trust in the LORD with all your heart And do not lean on your own understanding.  In all your ways acknowledge Him, And He will make your paths straight.”

(Proverbs 3:5,6 NIV)

 

Hi.

Well effected thunderbird versions with the statusbar issue include beta 71 and 68 esr.

There is a thunderbird 72 beta 2 out, chances are the fix is in this for the beta channel.

Now we just need to wait for it to be backported to stable.

Hopefully now we are in the live user stable ish branch we should see something soon.

Looks good. I think it would be helpful, and relatively easy, to add
an "Application dictionary" option within the NVDA menu, within
Settings -> Speech dictionaries. The gesture is fine, but requires
people to read the docs before they can use it. Rather than it just
showing up where they expect it to.

Regards,

James Scholes

On 29/04/2020 at 2:27 pm, Rui Fontes wrote:

Hello friends!


Application Dictionary
Informations
• Authors: Ricardo M. Leonarczyk and Rui Fontes • Version: 1.3 •
Download stable version
<https://github.com/ruifontes/applicationDictionary-/releases/downloa
d/1.3/applicationDictionary-1.3.nvda-addon>
• Compatibility: NVDA: 2019.1 to 2020.1


Usage

This simple add-on makes possible to create application-specific
dictionaries for NVDA.
To use the add-on, just go to the application for wich you want a
dictionary for, and press NVDA+shift+p. The normal NVDA dictionary
dialog will open for you to add entries valid only for the active
application (the application name should appear in the dialog title).
The default add-on shortcut can be changed through NVDA's input
gestures dialog: under configuration node, expand the node that says
"Shows the application-specific dictionary dialog".
Command

"NVDA+Shift+p": Shows the application-specific dictionary dialog


Rui Fontes and Ricardo M. Leonarczyk

Looks good.  I think it would be helpful, and relatively easy, to add an "Application dictionary" option within the NVDA menu, within Settings -> Speech dictionaries.  The gesture is fine, but requires people to read the docs before they can use it.  Rather than it just showing up where they expect it to.

Regards,

James Scholes

On 29/04/2020 at 2:27 pm, Rui Fontes wrote:

Hello friends!


Application Dictionary
Informations
• Authors: Ricardo M. Leonarczyk and Rui Fontes
• Version: 1.3
• Download stable version <https://github.com/ruifontes/applicationDictionary-/releases/download/1.3/applicationDictionary-1.3.nvda-addon>;
• Compatibility: NVDA: 2019.1 to 2020.1


Usage

This simple add-on makes possible to create application-specific dictionaries for NVDA.
To use the add-on, just go to the application for wich you want a dictionary for, and press NVDA+shift+p. The normal NVDA dictionary dialog will open for you to add entries valid only for the active application (the application name should appear in the dialog title). The default add-on shortcut can be changed through NVDA's input gestures dialog: under configuration node, expand the node that says "Shows the application-specific dictionary dialog".
Command

"NVDA+Shift+p": Shows the application-specific dictionary dialog


Rui Fontes and Ricardo M. Leonarczyk

Hi,
You mean 2020.1 RC?
Cheers,
Joseph
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Curtis Delzer
Sent: Thursday, April 30, 2020 10:46 AM
To: NVDA discussion <nvda@nvda.groups.io>
Subject: [nvda] new beta 1, VERY NICE!
It is much quicker in picking up "fill in" type words, e.g. I type NVDA, and it quickly, in t-bird reads the list name. Also, on my desk top much quicker in finding items with a few key strokes. Much faster on the uptake when I just read email from different parts of the messages, name, subject, body, all nicely integrated. I am using Eloquence, sapi4 engine from my K1000 software, so haven't yet tried on other synthesizers, but hey, this is some kind of nice.
--
Curtis Delzer
HS
K 6 V F O
Rialto, CA
curtis@calweb.com