1. nvda@nvda.groups.io
   Date   
Re: Difference between codefactory and Tiflotecnia Vocalizer

Gene
 

I'm sure both these add-ons have demos. Aside from getting opinions, the best way to determine which you want is to try the demos.

Gene

-----Original Message-----
From: Greg Wocher
Sent: Sunday, May 03, 2020 12:56 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Difference between codefactory and Tiflotecnia Vocalizer

Hello,
I was just checking to see if the code factory vocalizer did not change pitch for capital letters. It does change pitch for me. I did notice that with certain voices, nathan for example, it worked on some letters but not others. I found that the female voices did do better than the male ones with Karen being the best. I also set the pitch change from 30 to 50.

Greg Wocher


On May 3, 2020, at 9:37 AM, Don H <lmddh50@adams.net> wrote:

I have the code factory vocalizer NVDA addon that I purchased from ATGuys. My only issue with them is the fact that the raise pitch on capital letteers does not work.

On 5/3/2020 6:03 AM, luke scholey wrote:
Hi all

Hope everyone’s safe and well.

Just a quick question, can someone give me a comparison of the Vocalizer (I’m only interested in vocalizer) offerings between the codefactory addon and the Tiflotecnia addon.

I want to know about the quality, responsiveness, number of voices available (they both say the same amount on the website) however Tiflotecnia’s voice page doesn’t seem to offer as many as codefactory, if there’s updates, how easy is that? Do you need to deactivate to do windows updates?

I’m just looking for someone who’s used one or both for a long time who can tell me straight up how they perform.

Thanks for any advice, I know things like this have been covered before, I’ve had a look but they’re spread far and wide over several topics
Luke
Re: Difference between codefactory and Tiflotecnia Vocalizer

Greg Wocher
 

Hello,
I was just checking to see if the code factory vocalizer did not change pitch for capital letters. It does change pitch for me. I did notice that with certain voices, nathan for example, it worked on some letters but not others. I found that the female voices did do better than the male ones with Karen being the best. I also set the pitch change from 30 to 50.

Greg Wocher

On May 3, 2020, at 9:37 AM, Don H <lmddh50@adams.net> wrote:

I have the code factory vocalizer NVDA addon that I purchased from ATGuys. My only issue with them is the fact that the raise pitch on capital letteers does not work.

On 5/3/2020 6:03 AM, luke scholey wrote:
Hi all

Hope everyone’s safe and well.

Just a quick question, can someone give me a comparison of the Vocalizer (I’m only interested in vocalizer) offerings between the codefactory addon and the Tiflotecnia addon.

I want to know about the quality, responsiveness, number of voices available (they both say the same amount on the website) however Tiflotecnia’s voice page doesn’t seem to offer as many as codefactory, if there’s updates, how easy is that? Do you need to deactivate to do windows updates?

I’m just looking for someone who’s used one or both for a long time who can tell me straight up how they perform.

Thanks for any advice, I know things like this have been covered before, I’ve had a look but they’re spread far and wide over several topics
Luke
Re: Difference between codefactory and Tiflotecnia Vocalizer

Jesse Farquharson
 

Sounds better in what way? I'm curious.
Re: Difference between codefactory and Tiflotecnia Vocalizer

Greg Wocher
 

Hello,
I have both the code factory add on and the Tiflotecnia one. I think the code factory add on sounds a bit better than the Tiflotecnia one. The Tiflotecnia add on does seem to be a bit more responsive than the code factory one. I have actually had the Tiflotecnia since it came out for NVDA. There are two reasons I recently purchased the code factory add- on. First is eloquence wich is one of my favorite synths. The second reason is that the code factory add on for vocalizer has voices that the Tiflotecnia one does not. Nathan and Evan are two that come to mind right away.

Greg Wocher

On May 3, 2020, at 1:29 PM, luke scholey <l.scholey@...> wrote:

Tiflotecnia 
Re: Difference between codefactory and Tiflotecnia Vocalizer

Jesse Farquharson
 

I do. I think it works quite well. Haven't noticed any garbling or anything of the like. Haven't experienced any crashes with these voices and they start up almost as fast as NVDA itself does. I do wish questionmarks and exclamation points were a bit more pronounced (you can't always tell a question is being posed based on the inflection) but in my experience that is pretty common with synths aside from good ol' Eloquence. Sigh
Re: Difference between codefactory and Tiflotecnia Vocalizer

luke scholey
 

Thanks all, very helpful. Does anyone have the Tiflotecnia version who could advise me as well?

Thanks
Luke

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Don H
Sent: 03 May 2020 14:37
To: nvda@nvda.groups.io
Subject: Re: [nvda] Difference between codefactory and Tiflotecnia Vocalizer

I have the code factory vocalizer NVDA addon that I purchased from ATGuys. My only issue with them is the fact that the raise pitch on capital letteers does not work.

On 5/3/2020 6:03 AM, luke scholey wrote:
Hi all

Hope everyone’s safe and well.

Just a quick question, can someone give me a comparison of the Vocalizer (I’m only interested in vocalizer) offerings between the codefactory addon and the Tiflotecnia addon.

I want to know about the quality, responsiveness, number of voices available (they both say the same amount on the website) however Tiflotecnia’s voice page doesn’t seem to offer as many as codefactory, if there’s updates, how easy is that? Do you need to deactivate to do windows updates?

I’m just looking for someone who’s used one or both for a long time who can tell me straight up how they perform.

Thanks for any advice, I know things like this have been covered
before, I’ve had a look but they’re spread far and wide over several
topics Luke
Re: NVDA remote?

luke scholey
 

From the following:

https://nvdaremote.com/

 

Luke

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Dennis L
Sent: 03 May 2020 18:08
To: nvda@nvda.groups.io
Subject: [nvda] NVDA remote?

 

Hi, where do you download the NVDA remote addon?
NVDA remote?

Dennis L
 

Hi, where do you download the NVDA remote addon?
Re: configuring nvda for announcing heading and heading levels:

Patrick Le Baudour
 

Hi,

As far as I know, it is not possible, unless some obscure addon does the trick.
Depending on what website you are using, navigating using header levels (digits 1 to 6 keys in desktop layout) can be of help instead of just h.
I've had that problem with a webnovel before, but my crude method of solving it was to copy-paste in notepad, i can't really recommend doing that. I also did have to save the page, to edit the faulty parts once, but that's even more tedious

Regards,

-- Patrick

Le 02/05/2020 à 13:12, zahra a écrit :
hello every one.
i wish to set nvda to announce heading level only even if i disable
reporting headings in document formatting!
is it possible? if so, how?
when i press h, i know that i move by headings.
fortunately nvda announces heading and its level after the content of
that heading.
but, if i move line by line, nvda unfortunately announces heading
before its content!
how i can i change this behaviour that if i enable reporting headings
in document formatting,
nvda announces headings and there level after there content even when
i navigate line by line?!
unfortunately, some authors forget to close heading tag,
and in some websites, nvda announces heading before any line which i
am moving to it by down arrow key!
its very annoying!
knowing heading levels are important for me, when i disable reporting
headings, i also miss heading levels.
but hearing heading before its content, is very annoying!
how can i overcome this problem?
thanks for your help, God bless you!
Re: Difference between codefactory and Tiflotecnia Vocalizer

Don H
 

I have the code factory vocalizer NVDA addon that I purchased from ATGuys.  My only issue with them is the fact that the raise pitch on capital letteers does not work.

On 5/3/2020 6:03 AM, luke scholey wrote:
Hi all

Hope everyone’s safe and well.

Just a quick question, can someone give me a comparison of the Vocalizer (I’m only interested in vocalizer) offerings between the codefactory addon and the Tiflotecnia addon.

I want to know about the quality, responsiveness, number of voices available (they both say the same amount on the website) however Tiflotecnia’s voice page doesn’t seem to offer as many as codefactory, if there’s updates, how easy is that? Do you need to deactivate to do windows updates?

I’m just looking for someone who’s used one or both for a long time who can tell me straight up how they perform.

Thanks for any advice, I know things like this have been covered before, I’ve had a look but they’re spread far and wide over several topics
Luke
Re: What'sapp on PC?

Kerryn Gunness
 


thanks jene NZ
 

----- Original Message -----
Sent: Sunday, May 3, 2020 1:24 AM
Subject: Re: [nvda] What'sapp on PC?

Hi


Just confirmed to send a voice message just under the chat part to the person. You just need to go into browse mode hit the space bar on the button and the first time allow your camera or mic. Then after that find the button again hit the space bar on the button record the message you can also arrow up to see the duration of the recording then arrow back down to the button and hit the space bar on the button to stop it and send it. Just been added into the tutorial. It would make it so much easier if they were labled.


Now to see what sections are under the attachments section and add them in if all goes well.


Not sure if i can do a new group but think you need to drag and drop people into the chat unless it lets you add them in by text.


Gene nz


On 3/05/2020 12:37 pm, Andre Fisher wrote:
Hi.

Correction, the WhatsApp desktop client can send audio messages. There is a button at the bottom of the chat, that can send voice notes. It's not labelled. You can press the button to record, then press the button again to stop recording and send the message. I normally go to a next chat to cancel.

Re: What'sapp on PC?

Kerryn Gunness
 


can someone inform me how to use goldan cursor?
 not sure how to use it
 

----- Original Message -----
Sent: Saturday, May 2, 2020 10:40 PM
Subject: Re: [nvda] What'sapp on PC?

Hi


I will have another sus later on today. I will also get my wife to say what there is under the attachments part in the program. I know there was a couple of things but un labeled. I am also going to see if the golden mouse thingy might be able to get me to the correct places. I tried it before I could nate a position but was not read out but could get to it.


I will also have another look under the chat part for the audio note you spoke about I thought I did see it come up some where but not sure of the section? in whats app.


Then once I know will add it into the tutorial much easier if the buttons were labeled correctly in the program.


Gene nz


On 3/05/2020 12:37 pm, Andre Fisher wrote:
Hi.

Correction, the WhatsApp desktop client can send audio messages. There is a button at the bottom of the chat, that can send voice notes. It's not labelled. You can press the button to record, then press the button again to stop recording and send the message. I normally go to a next chat to cancel.

Re: Having NVDA not say blank lines when reading an email

Gene
 

No, but why are you reading line by line and not using read to end? If you use read to end, you won't hear blank lines announced.

Gene

-----Original Message-----
From: Dennis L
Sent: Sunday, May 03, 2020 1:32 AM
To: nvda@nvda.groups.io
Subject: [nvda] Having NVDA not say blank lines when reading an email



Hi, if you receive an email is there anyway to have NVDA not read blank lines? Can you have program specific settings?
Re: Difference between codefactory and Tiflotecnia Vocalizer

Bob Jutzi
 

I went with Codefactory due to the cheaper price along with inclusion of
Eloquence, which I really wanted.  A slight drawback, though not a
dealbreaker for me, the voices are somewhat gargled but extremely
responsive.  Just as a precaution, I deactivate my license prior to
reinstalling Windows 10.

My system is a Dell Inspiron 3650 3.7ghz 7th gen. Core i3, with 8gb memory.

On 5/3/2020 7:23 AM, Shaun Everiss wrote:
I am using code factory sapi addon and as long as you deactivate it
betwene major os upgrades its fine.

You can only have 1 voice of each language installed with 1 level low
or high, but once you have a small file downloaded you are free to
install what languages you want.

For me I have the high quality voices since I have the computer power
etc.

The voice activation and installs are all server based though so if
for any reason servers time out, things may deactivate till you
reactivate again though if that is the case you will not lose anything.

Atguys.com is where I got the voices and they are definitely worth it.

A big reason I got the sapi voices was for gaming but also because I
have a 64 bit machine and windows seems not to always play nice with
32 bit voices, switching them back to default voices each startup or
so I have been told.



On 3/05/2020 11:03 pm, luke scholey wrote:
Hi all

Hope everyone’s safe and well.

Just a quick question, can someone give me a comparison of the
Vocalizer (I’m only interested in vocalizer) offerings between the
codefactory addon and the Tiflotecnia addon.

I want to know about the quality, responsiveness, number of voices
available (they both say the same amount on the website) however
Tiflotecnia’s voice page doesn’t seem to offer as many as
codefactory, if there’s updates, how easy is that? Do you need to
deactivate to do windows updates?

I’m just looking for someone who’s used one or both for a long time
who can tell me straight up how they perform.

Thanks for any advice, I know things like this have been covered
before, I’ve had a look but they’re spread far and wide over several
topics
Luke
Re: Difference between codefactory and Tiflotecnia Vocalizer

Shaun Everiss
 

I am using code factory sapi addon and as long as you deactivate it betwene major os upgrades its fine.

You can only have 1 voice of each language installed with 1 level low or high, but once you have a small file downloaded you are free to install what languages you want.

For me I have the high quality voices since I have the computer power etc.

The voice activation and installs are all server based though so if for any reason servers time out, things may deactivate till you reactivate again though if that is the case you will not lose anything.

Atguys.com is where I got the voices and they are definitely worth it.

A big reason I got the sapi voices was for gaming but also because I have a 64 bit machine and windows seems not to always play nice with 32 bit voices, switching them back to default voices each startup or so I have been told.

On 3/05/2020 11:03 pm, luke scholey wrote:
Hi all

Hope everyone’s safe and well.

Just a quick question, can someone give me a comparison of the Vocalizer (I’m only interested in vocalizer) offerings between the codefactory addon and the Tiflotecnia addon.

I want to know about the quality, responsiveness, number of voices available (they both say the same amount on the website) however Tiflotecnia’s voice page doesn’t seem to offer as many as codefactory, if there’s updates, how easy is that? Do you need to deactivate to do windows updates?

I’m just looking for someone who’s used one or both for a long time who can tell me straight up how they perform.

Thanks for any advice, I know things like this have been covered before, I’ve had a look but they’re spread far and wide over several topics
Luke
Difference between codefactory and Tiflotecnia Vocalizer

luke scholey
 

Hi all

Hope everyone’s safe and well.

Just a quick question, can someone give me a comparison of the Vocalizer (I’m only interested in vocalizer) offerings between the codefactory addon and the Tiflotecnia addon.

I want to know about the quality, responsiveness, number of voices available (they both say the same amount on the website) however Tiflotecnia’s voice page doesn’t seem to offer as many as codefactory, if there’s updates, how easy is that? Do you need to deactivate to do windows updates?

I’m just looking for someone who’s used one or both for a long time who can tell me straight up how they perform.

Thanks for any advice, I know things like this have been covered before, I’ve had a look but they’re spread far and wide over several topics
Luke
Re: Cloudflare HCAPTCHA using NVDA problem

Alexander Epaneshnikov
 

hello. HCAPTCHA  is accessible pleas look at https://www.hcaptcha.com/accessibility

 

 
Testing of block editor

Marco Oros
 

Hello.

Due to some facts, I have tried to test block editor for Wordpress. I know, some things are accessible, but sometimes It is good to use keyboard shortcuts ETC.

So, can I post some articles about It to My blogs and share It with You?

Attention:

I am not English native speaker, so It'll countains some mistakes, but I think not very big. I'll write those articles in My native language, which is Slovak and in English, because this is actually one forreign language, which I knows the best.

Thank You for understanding and have a nice day.

Thank You.

best regards

Marco Oros
Having NVDA not say blank lines when reading an email

Dennis L
 

Hi, if you receive an email is there anyway to have NVDA not read  blank lines?  Can you have program specific settings?
Re: What'sapp on PC?

hurrikennyandopo ...
 

Hi


Just confirmed to send a voice message just under the chat part to the person. You just need to go into browse mode hit the space bar on the button and the first time allow your camera or mic. Then after that find the button again hit the space bar on the button record the message you can also arrow up to see the duration of the recording then arrow back down to the button and hit the space bar on the button to stop it and send it. Just been added into the tutorial. It would make it so much easier if they were labled.


Now to see what sections are under the attachments section and add them in if all goes well.


Not sure if i can do a new group but think you need to drag and drop people into the chat unless it lets you add them in by text.


Gene nz


On 3/05/2020 12:37 pm, Andre Fisher wrote:
Hi.

Correction, the WhatsApp desktop client can send audio messages. There is a button at the bottom of the chat, that can send voice notes. It's not labelled. You can press the button to record, then press the button again to stop recording and send the message. I normally go to a next chat to cancel.

8821 - 8840 of 82052