Date   

Re: accessible uninstaller

 

On Tue, May 19, 2020 at 03:28 PM, Kenny wrote:
That's exactly what I did [a completely clean reinstall on a brand-new machine]
It's something that many technicians will do, and if you have an SSD it's an incredibly fast process.  What takes the most time is getting updates that may have been issued since the last ISO building blocks were officially released.  For the ISO for version 1909 I snagged yesterday, the check for additional updates and downloading them took less than 2 minutes.  Mind you, the client had fiber-optic internet, which helps immensely, but you can still get a sense of how much it was snagging, and at this stage in the game with version 1909 it was very little.

Using install media created via the Microsoft Windows 10 Media Creation Tool gets you the most "stripped down and essential" Windows 10 installation you can get.  Even then, take the time to actually review the various screens during setup and tweak to your liking.

At this point I'm going to ask that unless someone wishes to propose another third-party uninstaller that's accessible via NVDA, we take this to the Chat Subgroup if the discussion of getting the cleanest fresh install of Windows 10 requires more discussion.  I'll end with noting you're definitely right, Kenny, that using any manufacturer's restore partition/utility to restore your machine to its "out of the box" state does just that - bloatware and all.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Science has become just another voice in the room; it has lost its platform.  Now, you simply declare your own truth.

      ~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine Sentiment Took Hold in the United States, September 23, 2019

 

 


Re: accessible uninstaller

Kenny <kwashingtonbox@...>
 

That's exactly what I did with my new Dell XPS PC. You can't reset it for it will put all the McAfee and other unnecessary factory installed bloatware back. Had to use the Microsoft Media Creation tool to install a fresh copy of Windows 10. Worked out perfect for me.


On 5/19/2020 2:12 PM, Brian Vogel wrote:
Austin,

             If you're getting a brand new, or even brand new to you, PC the easiest way to get the very cleanest Windows 10 possible is simply to do a completely clean reinstall.  Gets rid of anything and everything an manufacturer loads on it as bloatware.

Doing a Completely Clean (Re)install of Windows 10 Using Media Creation Tool to Fetch the Win10 ISO File

Doing a Completely Clean (Re)install of Windows 10 Using Media Creation Tool to Create Bootable Win10 Install Media on a USB Thumb Drive

As far as an uninstaller utility, those should not be used unless the uninstaller that comes with a given piece of software fails somehow.  The cleanest uninstall is generally using the dedicated uninstaller for a program that came with it, though there are, of course, exceptions, but relatively few.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Science has become just another voice in the room; it has lost its platform.  Now, you simply declare your own truth.

      ~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine Sentiment Took Hold in the United States, September 23, 2019

 

 


Re: reading what seems to be a blank email

 

Betsy,

           I did receive the forwarded copy and have played with it, to the same end result you had.  If this is an organization you deal with frequently, they should be made aware that they are using HTML coding that is both non-standard and not accessible.

           Even if I click in to the text itself, you get nothing with a read all or any motion through the text.  It's as though there's a "cloak of invisibility" placed over it.  This is not in any way characteristic of most HTML formatted messages (which should be as accessible as web pages are).

            It's always good to have several tricks in your back pocket, as Gene has suggested, for dealing with this when you need to.  But, the people that should be dealing with the issue are those generating the message to begin with.  It probably takes more effort to create and inaccessible HTML message than a correctly formatted one.  This is the first I've ever dealt with that has the total "cloak of invisibility" quality.  Very weird.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Science has become just another voice in the room; it has lost its platform.  Now, you simply declare your own truth.

      ~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine Sentiment Took Hold in the United States, September 23, 2019

 

 


Re: accessible uninstaller

 

Austin,

             If you're getting a brand new, or even brand new to you, PC the easiest way to get the very cleanest Windows 10 possible is simply to do a completely clean reinstall.  Gets rid of anything and everything an manufacturer loads on it as bloatware.

Doing a Completely Clean (Re)install of Windows 10 Using Media Creation Tool to Fetch the Win10 ISO File

Doing a Completely Clean (Re)install of Windows 10 Using Media Creation Tool to Create Bootable Win10 Install Media on a USB Thumb Drive

As far as an uninstaller utility, those should not be used unless the uninstaller that comes with a given piece of software fails somehow.  The cleanest uninstall is generally using the dedicated uninstaller for a program that came with it, though there are, of course, exceptions, but relatively few.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Science has become just another voice in the room; it has lost its platform.  Now, you simply declare your own truth.

      ~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine Sentiment Took Hold in the United States, September 23, 2019

 

 


nvda keys, or at least something quits working.

Sarah k Alawami
 

Well, this is an odd one. I turned on my computer today and I noticed that tsometimes my control left and right arrow keys quick working, in fact I cannot even use my arrow keys to read character by character. I have the log here, but a restart of NVDA fixes it but for a while. I'm hoping my computer is just glitchy today. lol! Here is the log file.


https://www.dropbox.com/s/udco9m6ftkl31i0/nvda-old.log?dl=1


   I have 1 add on disabled, but  that should not matter, I will try a restart later today to see if that works or not.


Thanks all. and I'm using 2020.1 I think.


Re: Windows 10 App Essentials 20.06, last release to support Windows 10 May 2019 Update #addonrelease

 

Hi,

Nope – those are app notifications collected by Action Center. The notifications I speak of are things such as “loading complete” in Edge.

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Kenny
Sent: Tuesday, May 19, 2020 7:28 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Windows 10 App Essentials 20.06, last release to support Windows 10 May 2019 Update #AddonRelease

 

Interesting why someone would want to completely disable speaking of those UIA app notifications through NVDA? You can disable them individually right from within the Windows Action Center located in the Systray.

 

First you here a UIA notification spawned by an app:

1. Press [Windows Key] + [a].

2. [Tab] over to the parent notification app grouping list.

3. Arrow [Down] to the child notification for the app you wish to disable.

4. [Tab] over to the "Settings for this notification" button.

5. Press the [Spacebar] on it.

6. From the pop up menu of options, arrow [Down] or [Up] to "Turn off all notifications for <Name of app>."

 

Simply Select it, and POOF: no more UIA notifications for that specific app. Have disabled notifications for Microsoft mail, and the Microsoft store. They were really the only notifications that were annoying the heck out of me.

 

I use Thunderbird as my primary email client.

 

Using the latest build of Microsoft Windows 10 v2004 by the way.

 

On 5/19/2020 3:12 AM, Joseph Lee wrote:

Hi all,

 

Windows 10 App Essentials 20.06 is now available. In addition to Flake8 related internals work, it brings ability to let NVDA stop announcing UIA notifications from Microsoft Store and other programs if “report notifications” is turned off from NVDA’s object presentation settings. As always, the add-on update is available via community add-ons website and through Add-on Updater.

 

IMPORTANT: in accordance with support policy for Windows 10 App Essentials add-on (supporting a given Windows 10 feature update for at least a year but not forever), version 20.06 will be the last release to support Windows 10 Version 1903 (May 2019 Update/build 18362). Version 1903 was supported by this add-on since March 2019, and it is time to say goodbye from this add-on. But not all is lost: Version 1909 (November 2019 Update) and upcoming Version 2004 (May 2020 Update) are supported (in a way, due to special nature of November 2019 Update, the add-on will keep supporting May 2019 Update a while longer). Actually, Windows 10 App Essentials supports two future feature updates already (more on that later). Nevertheless, for support policy, the next major version of this add-on (20.07) will require Windows 10 Version 1909 (November 2019 Update/build 18363) or later.

 

Also, for people using development snapshots: the last development snapshots before the break will be sent this weekend. The next one after that will show up in July.

Cheers,

Joseph


Re: Question: Removing Bookmarks In Mozilla Firefox Using NVDA and Keyboard-- not mouse

Gene
 

This isn't an NVDA question.  I'll answer it but I won't discuss it further here, but in the chat group.
One way is to use alt b to open book marks.  Find the one you want, open the context menu, find delete and press enter.  Before you press enter the first time, note the short cut letter, I think its d.  From now on, open the context menu and type d, if my memory is correct about the short cut.
 
You can use the search book marks feature but you have to get to it in a different way now.  
Control I doesn't open book mark search in most parts of the program interface now.
Instead, use this cumbersome method.  I think that often, searching for a bookmark is convenient enough that fooling around with the cumbersome interface is worth it.
 
Open the library part of Firefox that deals with book marks with control shift b.
Shift tab twice.  Type what you are looking for.  Tab once.  You will see search results. 
Press enter on the one you want, you are working just as if you were in control I results now.
Then, once the desired page loads, alt tab to library and close it with alt f4.
 
If you want to see the tree view you saw with control I when you tabbed once without typing anything, do the following:
Open the library, control shift b, and shift tab once.  You are now in the tree view.
 
Gene
----- Original Message -----

Sent: Tuesday, May 19, 2020 11:35 AM
Subject: [nvda] Question: Removing Bookmarks In Mozilla Firefox Using NVDA and Keyboard-- not mouse

Hello,
I have Firefox 76.0.1 64bit on this laptop running Win7. I would like to clean up my bookmarks. There was a method I had used in the past involving control+i which now seems to not work as it had previously.
Googling led me to hear of a way to remove a bookmark where you click an icon on the address bar-- something I had no luck in finding how to access that icon from the address bar.
How can I remove bookmarks, either one at a time or in multiples, using only the keyboard with NVDA?
Thanks!
--Laurie M.


Re: Question: Removing Bookmarks In Mozilla Firefox Using NVDA and Keyboard-- not mouse

Chris
 

I think you may be looking for ctrl+shift+B

 

 

From: Laurie Mehta via groups.io
Sent: 19 May 2020 17:35
To: nvda@nvda.groups.io
Subject: [nvda] Question: Removing Bookmarks In Mozilla Firefox Using NVDA and Keyboard-- not mouse

 

Hello,
I have Firefox 76.0.1 64bit on this laptop running Win7. I would like to clean up my bookmarks. There was a method I had used in the past involving control+i which now seems to not work as it had previously.
Googling led me to hear of a way to remove a bookmark where you click an icon on the address bar-- something I had no luck in finding how to access that icon from the address bar.
How can I remove bookmarks, either one at a time or in multiples, using only the keyboard with NVDA?
Thanks!
--Laurie M.

 


Question: Removing Bookmarks In Mozilla Firefox Using NVDA and Keyboard-- not mouse

Laurie Mehta
 

Hello,
I have Firefox 76.0.1 64bit on this laptop running Win7. I would like to clean up my bookmarks. There was a method I had used in the past involving control+i which now seems to not work as it had previously.
Googling led me to hear of a way to remove a bookmark where you click an icon on the address bar-- something I had no luck in finding how to access that icon from the address bar.
How can I remove bookmarks, either one at a time or in multiples, using only the keyboard with NVDA?
Thanks!
--Laurie M.


Re: What do You prefer to write Docs, Presentations, or Spreadsheets with NVDA

Sarah k Alawami
 

Jarte for docs, and emails. I don't do the rest.

Sarah Alawami, owner of TFFP. . For more info go to our website.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on [twitch.](http://twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 19 May 2020, at 6:00, Tyaseta Rabita Nugraeni Sardjono wrote:

microsoft office and open office....google service is for gmail,
googling, google from

On 5/19/20, Marco Oros marco.oros93@... wrote:

Hello.

I have a question.

What do You prefer to write Docs, Slides and Spreadsheets with NVDA?

Google services, Microsoft office, or Apache Open office?

Thank You.

Marco


Re: accessible uninstaller

Sarah k Alawami
 

I just use the one built into windows. It works, fine, or rather I use he ones built into the apps that I uninstall.

I hope my watch won't notice as it says do not take it off the charger while the update is happening. woops? I hope I didn't ruin the watch.

Sarah Alawami, owner of TFFP. . For more info go to our website.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on [twitch.](http://twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 19 May 2020, at 5:32, Austin Pinto wrote:

hi all.
is there an accessible uninstaller which works with nvda?
i used to use revo uninstaller but some versions back it was
inaccessible is it the same?
please suggest something.
i would prefer if its portable which can be run without installation.
but even if its not its ok.
i am getting a new laptop and i know it will come with a lot of crap
so i want to remove the crap cleanly.
also what is the solution of uninstalling macaffi i think the
uninstaller asks for a captcha how to get around it.


Re: The next evolution of NVDA?

Sarah k Alawami
 

Isn't it that lexi program, I know the one you are talking about as the dev is on the reaper's list. He managed to make I think it was melodine accessible etc.

Sarah Alawami, owner of TFFP. . For more info go to our website.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on [twitch.](http://twitch.tv/ke7zum] Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 18 May 2020, at 15:26, Joseph Lee wrote:

Hi,
We need the name of the plugin please. Besides that, all we can say is that the wheel has begun to spin.
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io nvda@nvda.groups.io On Behalf Of Luke Robinett
Sent: Monday, May 18, 2020 3:01 PM
To: nvda@nvda.groups.io
Subject: [nvda] The next evolution of NVDA?

As a home recording enthusiast, I use various types of music production software in conjunction with NVDA. There’s a very interesting NVDA plug-in that basically grants users access to graphical interfaces that are otherwise completely inaccessible. you run into a lot of these types of apps in the music world, such as various software instruments and effects plugins. anyway, I don’t quite understand how it does it’s magic but basically it uses optical character recognition to figure out what’s on the interface and you can then navigate its various controls like any other app. I do believe it requires specific templates to be developed for whatever software you are using it with. I’m just wondering, it seems like this type of approach could signal the next evolution of screen reader technology. Imagine if a screen reader could use artificial intelligence and machine learning along with existing strategies to grant us access to basically any interface, whether or not it followed accessibility standards. I wonder if such a thing will be possible in the near future outside of these very specific use cases like I described. Interesting food for thought.


Re: What do You prefer to write Docs, Presentations, or Spreadsheets with NVDA

CARLOS-ESTEBAN
 

I use MS Office versión 2019.

But the tools of Google also are very accesible.

Regards.

 

 

Enviado desde Correo para Windows 10

 

De: Marco Oros
Enviado: martes, 19 de mayo de 2020 6:35
Para: nvda@nvda.groups.io
Asunto: [nvda] What do You prefer to write Docs, Presentations, or Spreadsheets with NVDA

 

Hello.

 

I have a question.

 

What do You prefer to write Docs, Slides and Spreadsheets with NVDA?

 

Google services, Microsoft office, or Apache Open office?

 

Thank You.

 

Marco

 

 

 

 


Re: reading what seems to be a blank email

Gene
 

Its safer to read mail as text or as plain HTML so I hope you use one or the other, whichever you prefer. 
 
Gene

----- Original Message -----
That's very interesting.  I had thought that e-mail programs automatically read a message as text if no HTML version is included but it appears that may well not be the case.  it sounds as though the message you received is from someone who, isn't sending messages in the standard way.  I've heard of messages that are HTML only, but I haven't heard of messages that are plain text only and that isn't at all the standard way messages are sent. 
 
A lot of messages I get contain both H
TML and text versions.
 
 

Sent: Tuesday, May 19, 2020 9:16 AM
Subject: Re: [nvda] reading what seems to be a blank email

I did the steps and it was set to original HTML. I actually had to
change it to text before it could read the body of the email. Thank you
for teaching me something new to try when I come across another email
that will not read properly.


Gene, your help was greatly appreciated.

On 5/18/2020 3:22 AM, Gene wrote:
> To see how the program is set and change it, open the view menu, down arrow to message body as and press enter.
> Down arrow through the choices.  NVDA calls the items radio menu items, which makes no sense but that's how they are presented to NVDA.  If plain text is checked, you are reading mail in plain text.  My guess is that you are trying to read an HTML message that doesn't have a text variation included and are not seeing anything.  To read the message as HTML In the safest way, up or down arrow to simple HTML and press enter.  The menu will close and you are now reading mail as simple HTML.  That means that the HTML in messages used for formatting them is being used, but nothing in the HTML of any message can run.  So there is no chance of malicious code that may be in a message running.  Use that setting to read mail and you will be able to read any message like this along with all your other mail.
>
> Gene
> ----- Original Message -----
> From: Betsy Grenevitch
> Sent: Sunday, May 17, 2020 11:04 PM
> To: nvda@nvda.groups.io
> Subject: Re: [nvda] reading what seems to be a blank email
>
>
> It believe it is in text. How do I check?
>
>
>
>
> On 5/17/2020 7:47 PM, Gene wrote:
>
>    Are you reading mail as plain text, simple HTML or HTML?
>
>    Gene
>    ----- Original Message -----
>
>    From: Betsy Grenevitch
>    Sent: Sunday, May 17, 2020 6:34 PM
>    To: nvda@nvda.groups.io
>    Subject: [nvda] reading what seems to be a blank email
>
>
>    I was not sure if this should come on NvDA or thunderbird but am trying
>    on the NVDA list since I am using NVDA as the screen reader while using
>    Thunderbird as the mail program. For some reason in the past couple of
>    weeks a group from which I receive emails from has changed their format.
>    It acts like it is an image yet I can read it on the Polaris Mini
>    notetaker. Is there a command I can use to try to get NVDa to read the
>    email to me? I am willing to forward the email to one of the programmers
>    for NVDA if you would like to look at it to see what is happening. I am
>    using the latest version of NVDA and Windows 10 on my laptop.
>
>
>    I would much prefer to be able to read the emails on the laptop than the
>    notetaker because I would like to access the link in the email from the
>    laptop.
>
>
>    I would greatly appreciate any assistance that I can receive.
>
>
>    Thank you so very much.
>
>
>
>    --
>    Betsy Grenevitch
>    678-862-3876
>
>
>
>
--
Betsy Grenevitch
678-862-3876





Re: What do You prefer to write Docs, Presentations, or Spreadsheets with NVDA

Luke Davis
 

I used to use Open Office (for 15 years or so) on Linux and Windows, but last year I switched to MS Office. My muscle memory for shortcut keys can not seem to get the hang of ribbon command shortcuts, but other than that I prefer MS Office.

I mainly encounter Google Docs on mobile platforms. I don't much like reading documents in Google Docs, so don't imagine I would like writing them there either.

Luke

On Tue, 19 May 2020, Marco Oros wrote:

What do You prefer to write Docs, Slides and Spreadsheets with NVDA?
Google services, Microsoft office, or Apache Open office?


Re: nvda 2019.3 vocalizer, and remote support

Rui Fontes
 

Answer in private!


Best regards,


Customer support

Tiflotecnia, Lda.


Às 05:45 de 19/05/2020, intellisystech@... escreveu:

Hi, yesterday my license is still ok. When i start my computer today. The NVDA keep prompt "Your Vocalizer for NVDA credentials are not set for this computer. You will need to set them to use vocalizer for NVDA for long time periods, so your license can be properly verified.". nother I can do and press. How can I do now ? I try to delete the NVDA folder in appdata folder and install the NVDA again. After I insall the vocalizer driver again, I keeps prompt this error again. Please  help. Thanks


Re: Windows 10 App Essentials 20.06, last release to support Windows 10 May 2019 Update #addonrelease

Kenny <kwashingtonbox@...>
 

Interesting why someone would want to completely disable speaking of those UIA app notifications through NVDA? You can disable them individually right from within the Windows Action Center located in the Systray.


First you here a UIA notification spawned by an app:

1. Press [Windows Key] + [a].

2. [Tab] over to the parent notification app grouping list.

3. Arrow [Down] to the child notification for the app you wish to disable.

4. [Tab] over to the "Settings for this notification" button.

5. Press the [Spacebar] on it.

6. From the pop up menu of options, arrow [Down] or [Up] to "Turn off all notifications for <Name of app>."


Simply Select it, and POOF: no more UIA notifications for that specific app. Have disabled notifications for Microsoft mail, and the Microsoft store. They were really the only notifications that were annoying the heck out of me.


I use Thunderbird as my primary email client.


Using the latest build of Microsoft Windows 10 v2004 by the way.


On 5/19/2020 3:12 AM, Joseph Lee wrote:

Hi all,

 

Windows 10 App Essentials 20.06 is now available. In addition to Flake8 related internals work, it brings ability to let NVDA stop announcing UIA notifications from Microsoft Store and other programs if “report notifications” is turned off from NVDA’s object presentation settings. As always, the add-on update is available via community add-ons website and through Add-on Updater.

 

IMPORTANT: in accordance with support policy for Windows 10 App Essentials add-on (supporting a given Windows 10 feature update for at least a year but not forever), version 20.06 will be the last release to support Windows 10 Version 1903 (May 2019 Update/build 18362). Version 1903 was supported by this add-on since March 2019, and it is time to say goodbye from this add-on. But not all is lost: Version 1909 (November 2019 Update) and upcoming Version 2004 (May 2020 Update) are supported (in a way, due to special nature of November 2019 Update, the add-on will keep supporting May 2019 Update a while longer). Actually, Windows 10 App Essentials supports two future feature updates already (more on that later). Nevertheless, for support policy, the next major version of this add-on (20.07) will require Windows 10 Version 1909 (November 2019 Update/build 18363) or later.

 

Also, for people using development snapshots: the last development snapshots before the break will be sent this weekend. The next one after that will show up in July.

Cheers,

Joseph


Re: nvda 2019.3 vocalizer, and remote support

intellisystech@...
 

Hi, yesterday my license is still ok. When i start my computer today. The NVDA keep prompt "Your Vocalizer for NVDA credentials are not set for this computer. You will need to set them to use vocalizer for NVDA for long time periods, so your license can be properly verified.". nother I can do and press. How can I do now ? I try to delete the NVDA folder in appdata folder and install the NVDA again. After I insall the vocalizer driver again, I keeps prompt this error again. Please  help. Thanks


Re: reading what seems to be a blank email

Betsy Grenevitch
 

I did the steps and it was set to original HTML. I actually had to change it to text before it could read the body of the email. Thank you for teaching me something new to try when I come across another email that will not read properly.


Gene, your help was greatly appreciated.

On 5/18/2020 3:22 AM, Gene wrote:
To see how the program is set and change it, open the view menu, down arrow to message body as and press enter.
Down arrow through the choices. NVDA calls the items radio menu items, which makes no sense but that's how they are presented to NVDA. If plain text is checked, you are reading mail in plain text. My guess is that you are trying to read an HTML message that doesn't have a text variation included and are not seeing anything. To read the message as HTML In the safest way, up or down arrow to simple HTML and press enter. The menu will close and you are now reading mail as simple HTML. That means that the HTML in messages used for formatting them is being used, but nothing in the HTML of any message can run. So there is no chance of malicious code that may be in a message running. Use that setting to read mail and you will be able to read any message like this along with all your other mail.

Gene
----- Original Message -----
From: Betsy Grenevitch
Sent: Sunday, May 17, 2020 11:04 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] reading what seems to be a blank email


It believe it is in text. How do I check?




On 5/17/2020 7:47 PM, Gene wrote:

Are you reading mail as plain text, simple HTML or HTML?

Gene
----- Original Message -----

From: Betsy Grenevitch
Sent: Sunday, May 17, 2020 6:34 PM
To: nvda@nvda.groups.io
Subject: [nvda] reading what seems to be a blank email


I was not sure if this should come on NvDA or thunderbird but am trying
on the NVDA list since I am using NVDA as the screen reader while using
Thunderbird as the mail program. For some reason in the past couple of
weeks a group from which I receive emails from has changed their format.
It acts like it is an image yet I can read it on the Polaris Mini
notetaker. Is there a command I can use to try to get NVDa to read the
email to me? I am willing to forward the email to one of the programmers
for NVDA if you would like to look at it to see what is happening. I am
using the latest version of NVDA and Windows 10 on my laptop.


I would much prefer to be able to read the emails on the laptop than the
notetaker because I would like to access the link in the email from the
laptop.


I would greatly appreciate any assistance that I can receive.


Thank you so very much.



--
Betsy Grenevitch
678-862-3876



--
Betsy Grenevitch
678-862-3876


Re: accessible uninstaller

Kenny <kwashingtonbox@...>
 

One of the reasons why I keep the JAWS screen reader installed on my PC. It is able to read the interface for Revo Uninstaller  much better then NVDA.

On 5/19/2020 8:32 AM, Austin Pinto wrote:
hi all.
is there an accessible uninstaller which works with nvda?
i used to use revo uninstaller but some versions back it was
inaccessible is it the same?
please suggest something.
i would prefer if its portable which can be run without installation.
but even if its not its ok.
i am getting a new laptop and i know it will come with a lot of crap
so i want to remove the crap cleanly.
also what is the solution of uninstalling macaffi i think the
uninstaller asks for a captcha how to get around it.