Date   

Re: Question about NVDA Remote and Copying/pasting Text

Tony Ballou
 

Hey Steve,


Good question, here's some info that comes from the NVDA remote add-on documentation.  Hope it helps.


Push clipboard
The Push clipboard option in the remote menu allows you to push text from your clipboard. when activated, any text on the clipboard will be pushed to the other machines.


Tony

On 6/21/2020 10:28 AM, Steve Matzura wrote:
I have a long link that I need someone at the other end of an NVDA Remote session to use, and the computer on which it is to be used doesn't have an email client, so I can't just send it to them. Does NVDA Remote allow copying and pasting between local and remote computers? In other words, can I copy the link to my clipboard, connect to the remote computer, and through some special key combination, paste it on the other end's machine somewhere?



Re: Question about NVDA Remote and Copying/pasting Text

 

your welcome, its my pleasure to help.

On 6/21/20, Steve Matzura <number6@noisynotes.com> wrote:
Thank you. Didn't know about that one.


On 6/21/2020 10:44 AM, zahra wrote:
hello.
yes, just use push clipboard in nvda tools nvda remote submenu.

On 6/21/20, Steve Matzura <number6@noisynotes.com> wrote:
I have a long link that I need someone at the other end of an NVDA
Remote session to use, and the computer on which it is to be used
doesn't have an email client, so I can't just send it to them. Does NVDA
Remote allow copying and pasting between local and remote computers? In
other words, can I copy the link to my clipboard, connect to the remote
computer, and through some special key combination, paste it on the
other end's machine somewhere?






--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali


Re: NVDA, Braille display, and Lenovo laptop

 

hi.
my comment is not related to your issue.
but someone recommended me a lenovo thinkpad laptop!
whats your idea?
may i know which model do you use exactly?
if yours is lenovo thinkpad l 540,
please email me off list.
thanks and God bless you!

On 6/20/20, JM Casey <jmcasey@teksavvy.com> wrote:
Hey folks.



I'm running a Lenovo Thinkpad laptop with Windows 10 2004, and NVDA is
updated to latest stable channel build. I've got a Focus Braille display
attached to the computer via USB (no bluetooth adaptor currently in the
computer).

The laptop is a new acquisition for me and being semi-mobile with a
braille
display and a tool to read and write on is one of the chief reasons I got
the thing. I do a fair amount of reading of documents, books, easearch
materials and so on. I usually convert everything to plain text and read in
notepad, which has worked fine on my desktop. However, the laptop does not
count reading on a braille display as "activity", it seems, and goes to
sleep after several minutes. I've adjusted the time factor, but I'm
wondering if there is any way I can convince the computer that reading on
the display counts as "activity", since I do appreciate these battery
saving
features and so on, but it's annoying when after ten or fifteen m inutes of
reading the machine just needs to be reawoken, re-signed in, etc. I know
this wouldn't happen if I had the computer perform some simple task like
playing music or something, but I feel like I shouldn't *have* to do this
or
tap on the keyboard every so often just to let it now to stay awake. Any
ideas?

Again, I'm aware that I could just increase the time alotment or even tell
it never to go to sleep, but I'm wondering if there's a way I can take
advantage of these power-saving features somewhat and still get what I
want?








--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali


Re: NVDA, Braille display, and Lenovo laptop

JM Casey
 

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Jason White via groups.io
Sent: June 21, 2020 11:10 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA, Braille display, and Lenovo laptop

 

You might be able to set the cursor to follow the braille display as you read, which would send cursor movement events to the application and therefore keep the system from suspending.

On 6/20/20 12:40 PM, JM Casey wrote:

Hey folks.

 

I’m running a Lenovo Thinkpad laptop with Windows 10 2004, and NVDA is updated to latest stable channel build. I’ve got a Focus Braille display  attached to the computer via USB (no bluetooth adaptor currently in the computer).

The laptop is a new acquisition for me and being semi-mobile with a  braille display and a tool to read and write on is one of the chief reasons I got the thing. I do a fair amount of reading of documents, books, easearch materials and so on. I usually convert everything to plain text and read in notepad, which has worked fine on my desktop. However, the laptop does not count reading on a braille display as “activity”, it seems, and goes to sleep after several minutes. I’ve adjusted the time factor, but I’m wondering if there is any way I can convince the computer that reading on the display counts as “activity”, since I do appreciate these battery saving features and so on, but it’s annoying when after ten or fifteen m inutes of reading the machine just needs to be reawoken, re-signed in, etc. I know this wouldn’t happen if I had the computer perform some simple task like playing music or something, but I feel like I shouldn’t *have* to do this or tap on the keyboard every so often just to let it now to stay awake. Any ideas?

Again, I’m aware that I could just increase the time alotment or even tell it never to go to sleep, but I’m wondering if there’s a way I can take advantage of these power-saving features somewhat and still get what I want?

 

 


Re: NVDA, Braille display, and Lenovo laptop

Jason White
 

You might be able to set the cursor to follow the braille display as you read, which would send cursor movement events to the application and therefore keep the system from suspending.

On 6/20/20 12:40 PM, JM Casey wrote:

Hey folks.

 

I’m running a Lenovo Thinkpad laptop with Windows 10 2004, and NVDA is updated to latest stable channel build. I’ve got a Focus Braille display  attached to the computer via USB (no bluetooth adaptor currently in the computer).

The laptop is a new acquisition for me and being semi-mobile with a  braille display and a tool to read and write on is one of the chief reasons I got the thing. I do a fair amount of reading of documents, books, easearch materials and so on. I usually convert everything to plain text and read in notepad, which has worked fine on my desktop. However, the laptop does not count reading on a braille display as “activity”, it seems, and goes to sleep after several minutes. I’ve adjusted the time factor, but I’m wondering if there is any way I can convince the computer that reading on the display counts as “activity”, since I do appreciate these battery saving features and so on, but it’s annoying when after ten or fifteen m inutes of reading the machine just needs to be reawoken, re-signed in, etc. I know this wouldn’t happen if I had the computer perform some simple task like playing music or something, but I feel like I shouldn’t *have* to do this or tap on the keyboard every so often just to let it now to stay awake. Any ideas?

Again, I’m aware that I could just increase the time alotment or even tell it never to go to sleep, but I’m wondering if there’s a way I can take advantage of these power-saving features somewhat and still get what I want?

 

 


Re: Question about NVDA Remote and Copying/pasting Text

Steve Matzura
 

Thank you. Didn't know about that one.

On 6/21/2020 10:44 AM, zahra wrote:
hello.
yes, just use push clipboard in nvda tools nvda remote submenu.

On 6/21/20, Steve Matzura <number6@noisynotes.com> wrote:
I have a long link that I need someone at the other end of an NVDA
Remote session to use, and the computer on which it is to be used
doesn't have an email client, so I can't just send it to them. Does NVDA
Remote allow copying and pasting between local and remote computers? In
other words, can I copy the link to my clipboard, connect to the remote
computer, and through some special key combination, paste it on the
other end's machine somewhere?





Re: Question about NVDA Remote and Copying/pasting Text

 

hello.
yes, just use push clipboard in nvda tools nvda remote submenu.

On 6/21/20, Steve Matzura <number6@noisynotes.com> wrote:
I have a long link that I need someone at the other end of an NVDA
Remote session to use, and the computer on which it is to be used
doesn't have an email client, so I can't just send it to them. Does NVDA
Remote allow copying and pasting between local and remote computers? In
other words, can I copy the link to my clipboard, connect to the remote
computer, and through some special key combination, paste it on the
other end's machine somewhere?




--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali


Question about NVDA Remote and Copying/pasting Text

Steve Matzura
 

I have a long link that I need someone at the other end of an NVDA Remote session to use, and the computer on which it is to be used doesn't have an email client, so I can't just send it to them. Does NVDA Remote allow copying and pasting between local and remote computers? In other words, can I copy the link to my clipboard, connect to the remote computer, and through some special key combination, paste it on the other end's machine somewhere?


Re: StationPlaylist add-on 20.06.2 emergency update #AddpmRe;ease

Robert Doc Wright godfearer
 

hurray! It is now working like a charm!

----- Original Message -----
From: Joseph Lee
Sent: Friday, June 19, 2020 10:03 PM
Subject: [nvda] StationPlaylist add-on 20.06.2 emergency update #AddpmRe;ease

Jo a;;.

 

StationPlaylist add-on 20.06.2 emergency update is now available. This is an out of band update that resolves a critical error encountered where Studio app module portion of the add-on would not start.

 

Cheers,

Joseph


Re: Problem with NVDA and single key navigation in Chrome

georgijivankin@...
 

Yes, I’ll contact them for sure as this is pretty inconvenient and I think, it has cause other issues in the past, like this one that I just stumbled across, for example: https://github.com/nvaccess/nvda/issues/6324

 

Best,

Georgi.

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian Vogel
Sent: Saturday, June 20, 2020 6:01 PM  
To: nvda@nvda.groups.io
Subject: Re: [nvda] Problem with NVDA and single key navigation in Chrome

 

Georgi,

            You are quite welcome.   I would also suggest that you use whatever mechanism is available in Webroot SecureAnywhere to contact them and ask that NVDA be whitelisted or, at the very least, examined and that they stop marking it as any sort of threat.   There are false positives all the time, and once they're reported they generally get remedied very quickly.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Science has become just another voice in the room; it has lost its platform.  Now, you simply declare your own truth.

      ~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine Sentiment Took Hold in the United States, September 23, 2019

 

 


Re: Problem with NVDA and single key navigation in Chrome

 

Georgi,

            You are quite welcome.   I would also suggest that you use whatever mechanism is available in Webroot SecureAnywhere to contact them and ask that NVDA be whitelisted or, at the very least, examined and that they stop marking it as any sort of threat.   There are false positives all the time, and once they're reported they generally get remedied very quickly.

--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Science has become just another voice in the room; it has lost its platform.  Now, you simply declare your own truth.

      ~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine Sentiment Took Hold in the United States, September 23, 2019

 

 


Re: Problem with NVDA and single key navigation in Chrome

georgijivankin@...
 

Yes I did, but it didn’t fix the issue. I just replied to Brian with the workaround that temporarily fixed the glitch. Apparently my antivirus blocked some of the files that NVDA copies during its installation.

 

Thanks for the suggestion though!

 

Best,

Georgi.

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sarah k Alawami
Sent: Saturday, June 20, 2020 2:18 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Problem with NVDA and single key navigation in Chrome

 

Did you run the com registration tool found under tools in the nvda menu? I have not this issue, yet. And am using brave and chrome and edge over here.

--

Sarah Alawami, owner of TFFP. . For more info go to our website.

Check out my adventures with a shadow machine.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on twitch. Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 20 Jun 2020, at 10:46, georgijivankin@... wrote:

Thanks for the suggestion, Zahra. This is the first thing I tried when I encountered this strange behaviour, and it didn't solve the problem for me as it is not an intermittent issue but happens every time I open Chrome. Let's see if anyone else has other suggestions.

Best,
Georgi.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of zahra
Sent: Saturday, June 20, 2020 2:53 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Problem with NVDA and single key navigation in Chrome

hello.
sometimes nvda's keys dont work for me.
for example: if i press nvda plus n, i cant go to the nvda's menu.
i press nvda plus q, but dont confirm any of the options for restarting or exiting nvda.
in this situation, nvda's restart and exit options are in the background.
i press alt tab to access them and press scape to cancel them.
then, nvda's menus work for me and i can access them without any issue.
sometimes, nvda single letter navigation keys dont work for me in browsers, and pressing alt tab to go to another program and alt tab again to return to browser, work for me.

On 6/20/20, georgijivankin@... <georgijivankin@...> wrote:

Hello NVDA community,



This is my first post here, and sadly it's about a problem with NVDA I
encountered today that I'd like to get some opinions about.



I've been an NVDA user for a couple of years mostly on an Apple
MacBook Pro running Windows 10 on Bootcamp or on a Del XPS 13 and I
have never experienced what I will describe below. Today I've got a
brand new work computer - a Lenovo X1 Carbon with Windows 10, Lenovo
drivers, Chrome, Slack, Webroot SecureAnywhere and Umbrella Roaming
Client by Cisco already preinstalled.

I initially installed an older version of NVDA that I had lying around
on a flash drive, which I immediately updated to the newest official
version thereafter.

When opened Chrome, I noticed that it reads through the pages in
browse mode, it can switch between Browse and Focus modes and it
recognizes links, forms and other controls, but none of the single
navigation keystrokes like H, E, N, NVDA+Space and other similar keys
or key combinations work. Even the NVDA+1 key doesn't want to turn
help navigation on, same for the NVDA+N keystrokes combination.

Once I exit Chrome everything goes back to Normal and NVDA starts
responding as it should.



I tried the same with Microsoft Edge and it works - NVDA can
successfully intercept and process single navigation keys and key
combinations without issues jumping through headings, focusing edit controls, etc.



What I tried so far:

* Reinstalling NVDA a few times (both Version 2020.1, 2020.2 Beta 1
and snapshot builds),
* Deleting the %appdata%\nvda directory after each uninstallation,
* Reinstalling Chrome Version 83.0.4103.106 (Official Build) (64-bit),
* Running the Windows 10 file check scanner through Powershell as
described here:
https://support.microsoft.com/en-us/help/929833/use-the-system-file-ch
ecker- tool-to-repair-missing-or-corrupted-system
* Installing the latest update for Windows 10 Version 2004 (OS Build
19041.329) and all available security and driver updates through
Windows update.
* Running the Com Registration Fixing Tool a few times.



After one of the first NVDA or Chrome reinstallations, I managed to
get it working somehow, but after I kept customising my NVDA the way I
like it, after one of the subsequent reboots, the problem reappeared
and no reinstallations of Chrome or NVDA managed to fix it ever since.

There is nothing in the log viewer, neither in normal, nor in
debugging mode and I am out of ideas.



If you have any suggestions of things for me to try, please let me know.



Best Regards,

Georgi.



--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali





Re: Problem with NVDA and single key navigation in Chrome

georgijivankin@...
 

Hi Brian,

 

Your suspicions are correct. It was definitely the Webroot SecureAnywhere software interfering with the installation of NBDA. Since I can’t disable the software as it is being managed remotely by my organization, I tried a brute force workaround just to test your hypothesis – fetched the installed copy from my personal computer and transferred both the main NVDA and the profile directory that resides in %appdata%\roaming to the work computer and low and behold, it worked perfectly. I could successfully start NVDA and use Chrome as normal.

Then I attempted to update it to the latest beta to see if a normal installation would actually work, but after the restart it stopped working again, so I suspect the antivirus blocks some files of being properly copied or accessed by NVDA. I will ask my IT department to allow me to disable the antivirus locally in order to rectify the situation in a more permanent way.

 

Thank you for the troubleshooting suggestions and for the safe mode with sound script – definitely useful to have it for exactly this type of situations.

 

Best,

Georgi.

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian Vogel
Sent: Saturday, June 20, 2020 2:00 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Problem with NVDA and single key navigation in Chrome

 

I strongly suspect that this is some sort of weird interaction between something that came preinstalled on your machine, most likely security related, and Chrome and NVDA.

There are several ways you could proceed.

1. Turning off your security software, temporarily, and if that requires rebooting then reboot, and see if the issue goes away.

2.  Make sure you have already set up sound in safe mode with networking (See: Getting Sound in Safe Mode Under Windows 10) then see if the behavior occurs if you boot into Safe Mode.  This avoids loading an awful lot of startup processes to begin with.

3. If either of the above fixes the issue, you will then need to follow the proper procedure to go through the process of elimination to find out what exactly is the root cause of the problem.  What that is varies, so until more data is available it's really not worth going into the details.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Science has become just another voice in the room; it has lost its platform.  Now, you simply declare your own truth.

      ~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine Sentiment Took Hold in the United States, September 23, 2019

 

 


Re: Problem with NVDA and single key navigation in Chrome

Sarah k Alawami
 

Did you run the com registration tool found under tools in the nvda menu? I have not this issue, yet. And am using brave and chrome and edge over here.

--

Sarah Alawami, owner of TFFP. . For more info go to our website.

Check out my adventures with a shadow machine.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on twitch. Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 20 Jun 2020, at 10:46, georgijivankin@... wrote:

Thanks for the suggestion, Zahra. This is the first thing I tried when I encountered this strange behaviour, and it didn't solve the problem for me as it is not an intermittent issue but happens every time I open Chrome. Let's see if anyone else has other suggestions.

Best,
Georgi.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of zahra
Sent: Saturday, June 20, 2020 2:53 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Problem with NVDA and single key navigation in Chrome

hello.
sometimes nvda's keys dont work for me.
for example: if i press nvda plus n, i cant go to the nvda's menu.
i press nvda plus q, but dont confirm any of the options for restarting or exiting nvda.
in this situation, nvda's restart and exit options are in the background.
i press alt tab to access them and press scape to cancel them.
then, nvda's menus work for me and i can access them without any issue.
sometimes, nvda single letter navigation keys dont work for me in browsers, and pressing alt tab to go to another program and alt tab again to return to browser, work for me.

On 6/20/20, georgijivankin@... <georgijivankin@...> wrote:

Hello NVDA community,



This is my first post here, and sadly it's about a problem with NVDA I
encountered today that I'd like to get some opinions about.



I've been an NVDA user for a couple of years mostly on an Apple
MacBook Pro running Windows 10 on Bootcamp or on a Del XPS 13 and I
have never experienced what I will describe below. Today I've got a
brand new work computer - a Lenovo X1 Carbon with Windows 10, Lenovo
drivers, Chrome, Slack, Webroot SecureAnywhere and Umbrella Roaming
Client by Cisco already preinstalled.

I initially installed an older version of NVDA that I had lying around
on a flash drive, which I immediately updated to the newest official
version thereafter.

When opened Chrome, I noticed that it reads through the pages in
browse mode, it can switch between Browse and Focus modes and it
recognizes links, forms and other controls, but none of the single
navigation keystrokes like H, E, N, NVDA+Space and other similar keys
or key combinations work. Even the NVDA+1 key doesn't want to turn
help navigation on, same for the NVDA+N keystrokes combination.

Once I exit Chrome everything goes back to Normal and NVDA starts
responding as it should.



I tried the same with Microsoft Edge and it works - NVDA can
successfully intercept and process single navigation keys and key
combinations without issues jumping through headings, focusing edit controls, etc.



What I tried so far:

* Reinstalling NVDA a few times (both Version 2020.1, 2020.2 Beta 1
and snapshot builds),
* Deleting the %appdata%\nvda directory after each uninstallation,
* Reinstalling Chrome Version 83.0.4103.106 (Official Build) (64-bit),
* Running the Windows 10 file check scanner through Powershell as
described here:
https://support.microsoft.com/en-us/help/929833/use-the-system-file-ch
ecker- tool-to-repair-missing-or-corrupted-system
* Installing the latest update for Windows 10 Version 2004 (OS Build
19041.329) and all available security and driver updates through
Windows update.
* Running the Com Registration Fixing Tool a few times.



After one of the first NVDA or Chrome reinstallations, I managed to
get it working somehow, but after I kept customising my NVDA the way I
like it, after one of the subsequent reboots, the problem reappeared
and no reinstallations of Chrome or NVDA managed to fix it ever since.

There is nothing in the log viewer, neither in normal, nor in
debugging mode and I am out of ideas.



If you have any suggestions of things for me to try, please let me know.



Best Regards,

Georgi.




--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali






Re: Problem with NVDA and single key navigation in Chrome

 

I strongly suspect that this is some sort of weird interaction between something that came preinstalled on your machine, most likely security related, and Chrome and NVDA.

There are several ways you could proceed.

1. Turning off your security software, temporarily, and if that requires rebooting then reboot, and see if the issue goes away.

2.  Make sure you have already set up sound in safe mode with networking (See: Getting Sound in Safe Mode Under Windows 10) then see if the behavior occurs if you boot into Safe Mode.  This avoids loading an awful lot of startup processes to begin with.

3. If either of the above fixes the issue, you will then need to follow the proper procedure to go through the process of elimination to find out what exactly is the root cause of the problem.  What that is varies, so until more data is available it's really not worth going into the details.
--

Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363  

Science has become just another voice in the room; it has lost its platform.  Now, you simply declare your own truth.

      ~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine Sentiment Took Hold in the United States, September 23, 2019

 

 


Re: Problem with NVDA and single key navigation in Chrome

georgijivankin@...
 

Thanks for the suggestion, Zahra. This is the first thing I tried when I encountered this strange behaviour, and it didn't solve the problem for me as it is not an intermittent issue but happens every time I open Chrome. Let's see if anyone else has other suggestions.

Best,
Georgi.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of zahra
Sent: Saturday, June 20, 2020 2:53 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Problem with NVDA and single key navigation in Chrome

hello.
sometimes nvda's keys dont work for me.
for example: if i press nvda plus n, i cant go to the nvda's menu.
i press nvda plus q, but dont confirm any of the options for restarting or exiting nvda.
in this situation, nvda's restart and exit options are in the background.
i press alt tab to access them and press scape to cancel them.
then, nvda's menus work for me and i can access them without any issue.
sometimes, nvda single letter navigation keys dont work for me in browsers, and pressing alt tab to go to another program and alt tab again to return to browser, work for me.

On 6/20/20, georgijivankin@gmail.com <georgijivankin@gmail.com> wrote:
Hello NVDA community,



This is my first post here, and sadly it's about a problem with NVDA I
encountered today that I'd like to get some opinions about.



I've been an NVDA user for a couple of years mostly on an Apple
MacBook Pro running Windows 10 on Bootcamp or on a Del XPS 13 and I
have never experienced what I will describe below. Today I've got a
brand new work computer - a Lenovo X1 Carbon with Windows 10, Lenovo
drivers, Chrome, Slack, Webroot SecureAnywhere and Umbrella Roaming
Client by Cisco already preinstalled.

I initially installed an older version of NVDA that I had lying around
on a flash drive, which I immediately updated to the newest official
version thereafter.

When opened Chrome, I noticed that it reads through the pages in
browse mode, it can switch between Browse and Focus modes and it
recognizes links, forms and other controls, but none of the single
navigation keystrokes like H, E, N, NVDA+Space and other similar keys
or key combinations work. Even the NVDA+1 key doesn't want to turn
help navigation on, same for the NVDA+N keystrokes combination.

Once I exit Chrome everything goes back to Normal and NVDA starts
responding as it should.



I tried the same with Microsoft Edge and it works - NVDA can
successfully intercept and process single navigation keys and key
combinations without issues jumping through headings, focusing edit controls, etc.



What I tried so far:

* Reinstalling NVDA a few times (both Version 2020.1, 2020.2 Beta 1
and snapshot builds),
* Deleting the %appdata%\nvda directory after each uninstallation,
* Reinstalling Chrome Version 83.0.4103.106 (Official Build) (64-bit),
* Running the Windows 10 file check scanner through Powershell as
described here:
https://support.microsoft.com/en-us/help/929833/use-the-system-file-ch
ecker- tool-to-repair-missing-or-corrupted-system
* Installing the latest update for Windows 10 Version 2004 (OS Build
19041.329) and all available security and driver updates through
Windows update.
* Running the Com Registration Fixing Tool a few times.



After one of the first NVDA or Chrome reinstallations, I managed to
get it working somehow, but after I kept customising my NVDA the way I
like it, after one of the subsequent reboots, the problem reappeared
and no reinstallations of Chrome or NVDA managed to fix it ever since.

There is nothing in the log viewer, neither in normal, nor in
debugging mode and I am out of ideas.



If you have any suggestions of things for me to try, please let me know.



Best Regards,

Georgi.





--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali


NVDA, Braille display, and Lenovo laptop

JM Casey
 

Hey folks.

 

I’m running a Lenovo Thinkpad laptop with Windows 10 2004, and NVDA is updated to latest stable channel build. I’ve got a Focus Braille display  attached to the computer via USB (no bluetooth adaptor currently in the computer).

The laptop is a new acquisition for me and being semi-mobile with a  braille display and a tool to read and write on is one of the chief reasons I got the thing. I do a fair amount of reading of documents, books, easearch materials and so on. I usually convert everything to plain text and read in notepad, which has worked fine on my desktop. However, the laptop does not count reading on a braille display as “activity”, it seems, and goes to sleep after several minutes. I’ve adjusted the time factor, but I’m wondering if there is any way I can convince the computer that reading on the display counts as “activity”, since I do appreciate these battery saving features and so on, but it’s annoying when after ten or fifteen m inutes of reading the machine just needs to be reawoken, re-signed in, etc. I know this wouldn’t happen if I had the computer perform some simple task like playing music or something, but I feel like I shouldn’t *have* to do this or tap on the keyboard every so often just to let it now to stay awake. Any ideas?

Again, I’m aware that I could just increase the time alotment or even tell it never to go to sleep, but I’m wondering if there’s a way I can take advantage of these power-saving features somewhat and still get what I want?

 

 


Re: Problem with NVDA and single key navigation in Chrome

 

hello.
sometimes nvda's keys dont work for me.
for example: if i press nvda plus n, i cant go to the nvda's menu.
i press nvda plus q, but dont confirm any of the options for
restarting or exiting nvda.
in this situation, nvda's restart and exit options are in the background.
i press alt tab to access them and press scape to cancel them.
then, nvda's menus work for me and i can access them without any issue.
sometimes, nvda single letter navigation keys dont work for me in browsers,
and pressing alt tab to go to another program and alt tab again to
return to browser, work for me.

On 6/20/20, georgijivankin@gmail.com <georgijivankin@gmail.com> wrote:
Hello NVDA community,



This is my first post here, and sadly it's about a problem with NVDA I
encountered today that I'd like to get some opinions about.



I've been an NVDA user for a couple of years mostly on an Apple MacBook Pro
running Windows 10 on Bootcamp or on a Del XPS 13 and I have never
experienced what I will describe below. Today I've got a brand new work
computer - a Lenovo X1 Carbon with Windows 10, Lenovo drivers, Chrome,
Slack, Webroot SecureAnywhere and Umbrella Roaming Client by Cisco already
preinstalled.

I initially installed an older version of NVDA that I had lying around on a
flash drive, which I immediately updated to the newest official version
thereafter.

When opened Chrome, I noticed that it reads through the pages in browse
mode, it can switch between Browse and Focus modes and it recognizes links,
forms and other controls, but none of the single navigation keystrokes like
H, E, N, NVDA+Space and other similar keys or key combinations work. Even
the NVDA+1 key doesn't want to turn help navigation on, same for the NVDA+N
keystrokes combination.

Once I exit Chrome everything goes back to Normal and NVDA starts
responding
as it should.



I tried the same with Microsoft Edge and it works - NVDA can successfully
intercept and process single navigation keys and key combinations without
issues jumping through headings, focusing edit controls, etc.



What I tried so far:

* Reinstalling NVDA a few times (both Version 2020.1, 2020.2 Beta 1
and snapshot builds),
* Deleting the %appdata%\nvda directory after each uninstallation,
* Reinstalling Chrome Version 83.0.4103.106 (Official Build) (64-bit),
* Running the Windows 10 file check scanner through Powershell as
described here:
https://support.microsoft.com/en-us/help/929833/use-the-system-file-checker-
tool-to-repair-missing-or-corrupted-system
* Installing the latest update for Windows 10 Version 2004 (OS Build
19041.329) and all available security and driver updates through Windows
update.
* Running the Com Registration Fixing Tool a few times.



After one of the first NVDA or Chrome reinstallations, I managed to get it
working somehow, but after I kept customising my NVDA the way I like it,
after one of the subsequent reboots, the problem reappeared and no
reinstallations of Chrome or NVDA managed to fix it ever since.

There is nothing in the log viewer, neither in normal, nor in debugging
mode
and I am out of ideas.



If you have any suggestions of things for me to try, please let me know.



Best Regards,

Georgi.




--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali


Problem with NVDA and single key navigation in Chrome

georgijivankin@...
 

Hello NVDA community,

 

This is my first post here, and sadly it’s about a problem with NVDA I encountered today that I’d like to get some opinions about.

 

I’ve been an NVDA user for a couple of years mostly on an Apple MacBook Pro running Windows 10 on Bootcamp or on a Del XPS 13 and I have never experienced what I will describe below. Today I’ve got a brand new work computer – a Lenovo X1 Carbon with Windows 10, Lenovo drivers, Chrome, Slack, Webroot SecureAnywhere and Umbrella Roaming Client by Cisco already preinstalled.

I initially installed an older version of NVDA that I had lying around on a flash drive, which I immediately updated to the newest official version thereafter.

When opened Chrome, I noticed that it reads through the pages in browse mode, it can switch between Browse and Focus modes and it recognizes links, forms and other controls, but none of the single navigation keystrokes like H, E, N, NVDA+Space and other similar keys or key combinations work. Even the NVDA+1 key doesn’t want to turn help navigation on, same for the NVDA+N keystrokes combination.

Once I exit Chrome everything goes back to Normal and NVDA starts responding as it should.

 

I tried the same with Microsoft Edge and it works – NVDA can successfully intercept and process single navigation keys and key combinations without issues jumping through headings, focusing edit controls, etc.

 

What I tried so far:

  • Reinstalling NVDA a few times (both Version 2020.1, 2020.2 Beta 1 and snapshot builds),
  • Deleting the %appdata%\nvda directory after each uninstallation,
  • Reinstalling Chrome Version 83.0.4103.106 (Official Build) (64-bit),
  • Running the Windows 10 file check scanner through Powershell as described here: https://support.microsoft.com/en-us/help/929833/use-the-system-file-checker-tool-to-repair-missing-or-corrupted-system
  • Installing the latest update for Windows 10 Version 2004 (OS Build 19041.329) and all available security and driver updates through Windows update.
  • Running the Com Registration Fixing Tool a few times.

 

After one of the first NVDA or Chrome reinstallations, I managed to get it working somehow, but after I kept customising my NVDA the way I like it, after one of the subsequent reboots, the problem reappeared and no reinstallations of Chrome or NVDA managed to fix it ever since.

There is nothing in the log viewer, neither in normal, nor in debugging mode and I am out of ideas.

 

If you have any suggestions of things for me to try, please let me know.

 

Best Regards,

Georgi.


StationPlaylist add-on 20.06.2 emergency update #addonrelease

 

Jo a;;.

 

StationPlaylist add-on 20.06.2 emergency update is now available. This is an out of band update that resolves a critical error encountered where Studio app module portion of the add-on would not start.

 

Cheers,

Joseph

15661 - 15680 of 90389