Hey Zarah, I did have 17.2 and 17.3 on my external hard drive. I think I did
get rid of it. I might have done it on my 7 box before it bit the dust. My
room mate told me that Ihad dumped it. I knew I was coming to windows ten.
So she did tell me I dumped it. She dumped it when she used a thumb drive
that I had it on. I do like the voice it now comes with. I hope Luke or
someone gives you the link so you can go get your 17.2 or 17.3. I don’t
want it. Is your xp computer dying? The windows commands are somewhat the
same. But it’s a little different from xp. You wont have outlook express
like you do with xp.



Sent from Mail for Windows 10



From: zahra
Sent: June 23, 2020 5:23 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] windows ten and nvda 2017 versions:



Luke,

thanks for your helping me.

i sent you email and i waiting for your help off list.



On 6/23/20, Luke Davis <luke@newanswertech.com> wrote:

You may, although since I don't regularly use that old version for other

than

testing purposes, I don't know how much help I will be. But you're welcome

to

try.

I will also note, that Espeak has definite issues under Windows 10 and

2017.3.

The longer the text you read, the more harsh and distorted Espeak becomes,

until

it reaches some threshold and resets.

Espeak is definitely not pleasant in that use case. Some people might say
it

never is, but for someone like me who uses and prefers it, under 2017.3 it

is

difficult to listen to after a short time.

But you're welcome to ask your questions.

Luke

On Tue, 23 Jun 2020, zahra wrote:

thanks so much for your reply!

may i contact you offline and ask some questions in this regard?

however, my favorite version of nvda is 2017.2.

but espeak in 2017.3 is also good,

and there is no difference about espeak between these versions.

--

By God,

were I given all the seven heavens

with all they contain

in order that

I may disobey God

by depriving an ant

from the husk of a grain of barley,

I would not do it.

imam ali

Rui,

There has been discussion on this: https://github.com/nvaccess/nvda/issues/6553

Much of the issue is that everyone has different ideas on the best way forward for this.  If anyone has new ideas, then do, please comment on that issue.

Quentin.

On Tue, Jun 23, 2020 at 9:12 PM Rui Fontes <rui.fontes@...> wrote:

Quentin, have you already tried to work with NVDA in those conditions?

NVDA needs, urgently, a way to filter some keypresses from being announced...

See issues #5484, #5608 and many more...

Rui Fontes

Às 04:34 de 23/06/2020, Quentin Christensen escreveu:

If you press NVDA+4, or toggle "Speak command keys" in NVDA's keyboard settings, it will speak keys such as ENTER or CONTROL+S.

NVDA doesn't automatically know that CONTROL+S is save, so it generally won't automatically announce that, however if the keystroke brings up something like a save dialog, then that would be announced (for instance the first time you press control+s in a new document in Word).

Not directly related to control+s, but there is a "clipspeak" add-on which will report the functions of some keys such as control+c (Copy) and control+v (paste) where they perform those functions: https://addons.nvda-project.org/addons/clipspeak.en.html

Kind regards

Quentin.

On Tue, Jun 23, 2020 at 12:17 PM Grant Metcalf <the.gems@...> wrote:

I am hoping that sometime soon the NVDA developers will have NVDA speak commands such as “control-save”. I am always in doubt if I have been able to save the file I am working on. Mostly I use the text editor Notepad and very occasionally Wordpad for “RTF” files. Granpa DOS would appreciate all efforts the developers would exert toward making the very basic commands speak!

Cordially yours.

 

Listening for HIS shout!

Grant Metcalf

 

--

Quentin Christensen
Training and Support Manager

Web: www.nvaccess.org 

Training: https://www.nvaccess.org/shop/

Certification: https://certification.nvaccess.org/

User group: https://nvda.groups.io/g/nvda

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess

--

Quentin Christensen
Training and Support Manager

Web: www.nvaccess.org 

Training: https://www.nvaccess.org/shop/

Certification: https://certification.nvaccess.org/

User group: https://nvda.groups.io/g/nvda

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess

Thank you, sir.

I will try that.

On 6/23/20, Ralf Kefferpuetz <ralf.kefferpuetz@elra-consulting.de> wrote:

Hello,
Go to the account manager button, turnoff browse mode, press space and tab
3
times sothat you hear "sign off"

Cheers,
Ralf

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Marisane
Moruthanyana
Sent: Dienstag, 23. Juni 2020 16:45
To: nvda@nvda.groups.io
Subject: [nvda] nvda's unresponsiveness to outlook.com interface

Good day gentle people

I trust you are still well and safe from corona.

I am trying.

My experience is that nvda is unresponsive to outlook.com interface.

Does anyone of you have the same experience?

I cannot find the buttons to log out even when I activated the my account
submenu where these buttons are found when using jaws.

What is wrong with nvda?

Please assist.

Furthermore, is there any tutorial on nvda for outlook.com?

Your assistance is appreciated in advance.

Regards
Moruthanyana Wally: SA

Dropbox, Google Drive, OneDrive, or similar is probably the best way to share a copy of this document.  I've just used a free cloud solution when I needed
to share something widely among the readership here.

about the discripancy betwen the volume of YouTube  and Nvda, Daniel
wrote here as: 'I use an extension called "sound booster that works"
in Chrome. If the video is too low,, you can click on it, or set a
hotkey to it, so that the video's volume increases. It is fast and
works very well!'. I added the extention to my Chrome. I didn't know
where to klick or how to set hotkies to increase YouTube volume as
much as nvda. solution please?
fondly!On 6/14/20, Nevzat Adil <nevzatadil@...> wrote:
> Hi every one,
> There is a discrepancy between the volume of sound I get from NVDA and
> Youtube.
> For instance, when I listen to a Youtube video I need to turn the
> volume all the way up to hear some sound,  but then the volume from
> NVDA is at 100%.
> Is there a way to equalize the sound volumes of both NVDA and Youtube
> so that I won't have to turn up the volume all the way up to listen to
> a Youtube video?
> Any help would be appreciated.
> Nevzat Adil
> Library of Congress Certified
> Literary Braille Proofreader
> C: 512 502 4403
> e-mail: nevzatadil@...
> Facebook: m.facebook.com/LiteraryBrailleProofreader
>
>
>
>

Hey Zarah, I did have 17.2 and 17.3 on my external hard drive. I think I did get rid of it. I might have done it on my 7 box before it bit the dust. My room
mate told me that Ihad dumped it.  I knew I was coming to windows ten.  So she did tell me I dumped it.  She dumped it when she used a thumb drive that I
had it on.  I do like the voice it now comes with. I hope Luke or someone gives you the link so you can go get your 17.2 or 17.3.  I don’t want it. Is your
xp computer dying? The windows commands are somewhat the same. But it’s a little different from xp.  You wont have outlook express like you do with xp.

Hello! When i press Alt+Up addon don't go to previous sentence. Maybe i should check some settings in notepad++?