|
Re: Exchanging Acapela activation keys how's it done?
Kareen
Hi. as i know if the new code is for a new license your license will be extended whenever you enter the new code in the acapela tts menu in NVDA. so just enter the new code in the activate license and the new license should be taken automatically without doing anything else.
|
|
|
|
Excel 2016 Problem
Ramesh Patil
Hello,
I am facing problem in Excel 2016. When i press F2 NVDA always speaks Edit Item edit an edit control each time for eace cell after pressing F2. I dont want this. Instead of this full sentence NVDA will say only Edit it is also ok. I have tried with replace above line in dictionary but it is not working. Please help Thanks Ramesh Patil
|
|
|
|
Re: nvda add-on for internet download manager
Aschalew Byness
is that by pesting one URL after the other on Pontes editfield?
On 6/25/20, Aschalew Byness via groups.io <gakidan.ashagre235=gmail.com@groups.io> wrote: Pontes is a wonderful downloader. I liked it! thank you so much for
|
|
|
|
Re: Exchanging Acapela activation keys how's it done?
Quentin Christensen
I don't know - but just replying to suggest (particularly as you want to do it by the end of the month) that it might be worth contacting Acapela directly to ask. I expect you could probably use the acapela-nvda-mobilization@... address they setup to get the extended trial in the first place. Quentin.
On Fri, Jun 26, 2020 at 2:58 AM Gerardo Corripio <gera1027@...> wrote:
--
Quentin Christensen Training and Support Manager Training: https://www.nvaccess.org/shop/ Certification: https://certification.nvaccess.org/ User group: https://nvda.groups.io/g/nvda Facebook: http://www.facebook.com/NVAccess Twitter: @NVAccess
|
|
|
|
Exchanging Acapela activation keys how's it done?
Gerardo Corripio
What would the process involve, and can it be done before the 1st of july in which the 3-monthsAcapela NVDA voices stop working,deactivating the 3-month license, and put in thedefinite one that was purchased?
Enviado desde Correo para Windows 10
|
|
|
|
Re: Fixed Vocalizer-Expressive driver for NVDA 2019.3.1 and later
luke scholey
I’ve been looking for a trial version as well. I’ve already tried emailing but no response. Does anyone know how to try this before buying?
toggle quoted messageShow quoted text
Great that the error was fixed quickly Luke
On 25 Jun 2020, at 15:23, Bob Jutzi <jutzi@windstream.net> wrote:
|
|
|
|
Re: nvda add-on for internet download manager
Download multiple URL's means exactly that. Batch up a list of downloads that are not contained within a playlist.
|
|
|
|
Re: Fixed Vocalizer-Expressive driver for NVDA 2019.3.1 and later
Bob Jutzi
I would be interested in a demo; however, after installing the current
toggle quoted messageShow quoted text
driver along with a voice, I'm getting a notice that my demo has expired.
On 6/25/2020 10:07 AM, Rui Fontes wrote:
Hello!
|
|
|
|
Fixed Vocalizer-Expressive driver for NVDA 2019.3.1 and later
Rui Fontes
Hello!
We were alerted to an error when typing or spelling in the Vocalizer-Expressive 3.1.1 driver. As far as we know, it only affects hebrew and arabic languages... After some investigation we found the error and have already corrected it. The new driver version is at: https://www.tiflotecnia.net/Instal/vocalizer_expressive_driver-3.1.2.nvda-addon Best regards, Customer support Tiflotecnia, Lda.
|
|
|
|
Re: nvda ocr
Sam Taylor
Your system focus remains where it was; just continue to use your arrow keys. It's not like JAWS where it's necessary to change back to your original cursor.
On 25/06/2020 10:00 pm, Aschalew Byness
wrote:
thank you; but if position the navigator object with nvda+down or up arrow, what keystroke should I then press to get back to the system focus? On 6/25/20, Sam Taylor via groups.io <samtaylor9@...> wrote:numpad 7 or numpad 9 on a desktop, NVDA up arrow or NVDA down arrow if using laptop layout. You may also benefit from reading sections 5.4 and 5.5 of the user manual concerning object navigation and reviewing text. On 25/06/2020 9:20 pm, Aschalew Byness wrote:If I want to ocr a book, how do I position the navigater object? I mean, what key should I press first before I press nvda+r? On 6/25/20, Sam Taylor via groups.io <samtaylor9@...> wrote:NVDA's OCR recognises the current navigator object, not the system focus. So make sure that you position the navigator object first at the place you think the OCR should occur, before pressing NVDA+R. On 25/06/2020 7:51 pm, Aschalew Byness wrote:The image is a scanned document. I open this scanned document with Adobe reader. When I open it, nvda says: “Alert: Empty page page This page appears to be empty. It may contain a scanned image that needs OCR or it may be part of a malformed document.” After getting this message, I press insert +r. nvda says: ‘recognizing. Result document.” After that, if I press insert +r, nvda says: ‘already in a content recognition result’. If I arrow then, it reads: ‘blank”. On 6/25/20, Aschalew Byness via groups.io <gakidan.ashagre235@...> wrote:yeah, I am using windows 10 2004 version. when I try to recognize an image by pressing insert + r, there is nothing shown or heard. no bip sound, no spoken outcome whether it is recognizing. even when I press arrow keys, it simply says 'blank'. then How do I know whether it has started recognizing. How do I know whether it has finished recognising? On 6/25/20, zahra <nasrinkhaksar3@...> wrote:hello. do you use windows ten? if so, windows ten has internal ocr functionality that nvda developers added support for it since nvda version 2017.3. if you use any other windows version that has not internal ocr capability, you should install ocr addon. On 6/25/20, Aschalew Byness <gakidan.ashagre235@...> wrote:Hi lovely guys I always try to have nvda recognize image or scanned documents with insert+r. I don't get any result though. but, in jaws, when I press insert + space, o, c, I hear a kind of bip sound to let me know that the recognition is in process. it also lets me know when it finishes recognizing the document. I don't get the same in nvda although I press insert +r. it is dead silence. does this nvda OCR recognition really work.-- By God, were I given all the seven heavens with all they contain in order that I may disobey God by depriving an ant from the husk of a grain of barley, I would not do it. imam ali
|
|
|
|
Re: nvda ocr
Gene
You can't OCR extended material with NVDA. You may be able to OCR something like one image or one page of an image at a time, but not entire documents.
toggle quoted messageShow quoted text
Gene
-----Original Message-----
From: Aschalew Byness Sent: Thursday, June 25, 2020 6:20 AM To: nvda@nvda.groups.io Subject: Re: [nvda] nvda ocr If I want to ocr a book, how do I position the navigater object? I mean, what key should I press first before I press nvda+r? On 6/25/20, Sam Taylor via groups.io <samtaylor9=me.com@groups.io> wrote: NVDA's OCR recognises the current navigator object, not the system
|
|
|
|
Re: nvda ocr
Aschalew Byness
thank you; but if position the navigator object with nvda+down or up
toggle quoted messageShow quoted text
arrow, what keystroke should I then press to get back to the system focus?
On 6/25/20, Sam Taylor via groups.io <samtaylor9=me.com@groups.io> wrote:
numpad 7 or numpad 9 on a desktop, NVDA up arrow or NVDA down arrow if
|
|
|
|
Re: nvda ocr
Sam Taylor
numpad 7 or numpad 9 on a desktop, NVDA up arrow or NVDA down arrow if using laptop layout. You may also benefit from reading sections 5.4 and 5.5 of the user manual concerning object navigation and reviewing text.
On 25/06/2020 9:20 pm, Aschalew Byness wrote:
If I want to ocr a book, how do I position the navigater object? I mean, what key should I press first before I press nvda+r? On 6/25/20, Sam Taylor via groups.io <samtaylor9@...> wrote:NVDA's OCR recognises the current navigator object, not the system focus. So make sure that you position the navigator object first at the place you think the OCR should occur, before pressing NVDA+R. On 25/06/2020 7:51 pm, Aschalew Byness wrote:The image is a scanned document. I open this scanned document with Adobe reader. When I open it, nvda says: “Alert: Empty page page This page appears to be empty. It may contain a scanned image that needs OCR or it may be part of a malformed document.” After getting this message, I press insert +r. nvda says: ‘recognizing. Result document.” After that, if I press insert +r, nvda says: ‘already in a content recognition result’. If I arrow then, it reads: ‘blank”. On 6/25/20, Aschalew Byness via groups.io <gakidan.ashagre235@...> wrote:yeah, I am using windows 10 2004 version. when I try to recognize an image by pressing insert + r, there is nothing shown or heard. no bip sound, no spoken outcome whether it is recognizing. even when I press arrow keys, it simply says 'blank'. then How do I know whether it has started recognizing. How do I know whether it has finished recognising? On 6/25/20, zahra <nasrinkhaksar3@...> wrote:hello. do you use windows ten? if so, windows ten has internal ocr functionality that nvda developers added support for it since nvda version 2017.3. if you use any other windows version that has not internal ocr capability, you should install ocr addon. On 6/25/20, Aschalew Byness <gakidan.ashagre235@...> wrote:Hi lovely guys I always try to have nvda recognize image or scanned documents with insert+r. I don't get any result though. but, in jaws, when I press insert + space, o, c, I hear a kind of bip sound to let me know that the recognition is in process. it also lets me know when it finishes recognizing the document. I don't get the same in nvda although I press insert +r. it is dead silence. does this nvda OCR recognition really work.-- By God, were I given all the seven heavens with all they contain in order that I may disobey God by depriving an ant from the husk of a grain of barley, I would not do it. imam ali
|
|
|
|
Re: nvda ocr
Aschalew Byness
If I want to ocr a book, how do I position the navigater object? I
toggle quoted messageShow quoted text
mean, what key should I press first before I press nvda+r?
On 6/25/20, Sam Taylor via groups.io <samtaylor9=me.com@groups.io> wrote:
NVDA's OCR recognises the current navigator object, not the system
|
|
|
|
Re: nvda ocr
Sam Taylor
NVDA's OCR recognises the current navigator object, not the system focus. So make sure that you position the navigator object first at the place you think the OCR should occur, before pressing NVDA+R.
On 25/06/2020 7:51 pm, Aschalew Byness wrote:
The image is a scanned document. I open this scanned document with Adobe reader. When I open it, nvda says: “Alert: Empty page page This page appears to be empty. It may contain a scanned image that needs OCR or it may be part of a malformed document.” After getting this message, I press insert +r. nvda says: ‘recognizing. Result document.” After that, if I press insert +r, nvda says: ‘already in a content recognition result’. If I arrow then, it reads: ‘blank”. On 6/25/20, Aschalew Byness via groups.io <gakidan.ashagre235@...> wrote:yeah, I am using windows 10 2004 version. when I try to recognize an image by pressing insert + r, there is nothing shown or heard. no bip sound, no spoken outcome whether it is recognizing. even when I press arrow keys, it simply says 'blank'. then How do I know whether it has started recognizing. How do I know whether it has finished recognising? On 6/25/20, zahra <nasrinkhaksar3@...> wrote:hello. do you use windows ten? if so, windows ten has internal ocr functionality that nvda developers added support for it since nvda version 2017.3. if you use any other windows version that has not internal ocr capability, you should install ocr addon. On 6/25/20, Aschalew Byness <gakidan.ashagre235@...> wrote:Hi lovely guys I always try to have nvda recognize image or scanned documents with insert+r. I don't get any result though. but, in jaws, when I press insert + space, o, c, I hear a kind of bip sound to let me know that the recognition is in process. it also lets me know when it finishes recognizing the document. I don't get the same in nvda although I press insert +r. it is dead silence. does this nvda OCR recognition really work.-- By God, were I given all the seven heavens with all they contain in order that I may disobey God by depriving an ant from the husk of a grain of barley, I would not do it. imam ali
|
|
|
|
Re: nvda ocr
Aschalew Byness
The image is a scanned document. I open this scanned document with
Adobe reader. When I open it, nvda says: “Alert: Empty page page This page appears to be empty. It may contain a scanned image that needs OCR or it may be part of a malformed document.” After getting this message, I press insert +r. nvda says: ‘recognizing. Result document.” After that, if I press insert +r, nvda says: ‘already in a content recognition result’. If I arrow then, it reads: ‘blank”. On 6/25/20, Aschalew Byness via groups.io <gakidan.ashagre235=gmail.com@groups.io> wrote: yeah, I am using windows 10 2004 version. when I try to recognize an
|
|
|
|
Re: nvda ocr
Ralf Kefferpuetz
For me under Win10 2004 and before NVDA-R says Recognizing And then Result document
toggle quoted messageShow quoted text
Make sure the object containing the content you want to be OCR'ed is in focus. Cheers, Ralf
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Aschalew Byness Sent: Donnerstag, 25. Juni 2020 11:12 To: nvda@nvda.groups.io Subject: Re: [nvda] nvda ocr yeah, I am using windows 10 2004 version. when I try to recognize an image by pressing insert + r, there is nothing shown or heard. no bip sound, no spoken outcome whether it is recognizing. even when I press arrow keys, it simply says 'blank'. then How do I know whether it has started recognizing. How do I know whether it has finished recognising? On 6/25/20, zahra <nasrinkhaksar3@gmail.com> wrote: hello.
|
|
|
|
Re: nvda ocr
Luke Davis
Can you please provide some more information about how you are giving the image to NVDA?
toggle quoted messageShow quoted text
How do you get the image? What program are you in when you try to perform the OCR? What is NVDA saying, right before you press insert+r? Luke
On Thu, 25 Jun 2020, Aschalew Byness wrote:
Hi lovely guys
|
|
|
|
Figured out what was causing the error sound when invoking the select synth dialogue under NVDA 2020.2 beta versions
Jacob Kruger
I had the NV speech player add-on installed, and, now, when ran through disabling all non-essential add-ons, and then re-enabling them one at a time, this was the one that immediately started causing NVDA's error sound to occur when I hit NVDA + ctrl + S to bring up the select synthesizer dialogue.
When I then re-visited the following add-ons page, and, re-downloaded it, and, re-installed it, it didn't seem to be causing the issue anymore: https://addons.nvda-project.org/addons/nvSpeechPlayer.en.html So, not sure if had an older version installed, or something else, but, just mentioning this here, in case. Jacob Kruger Blind Biker Skype: BlindZA "...resistance is futile...but, acceptance is versatile..."
|
|
|
|
Re: nvda ocr
Aschalew Byness
yeah, I am using windows 10 2004 version. when I try to recognize an
toggle quoted messageShow quoted text
image by pressing insert + r, there is nothing shown or heard. no bip sound, no spoken outcome whether it is recognizing. even when I press arrow keys, it simply says 'blank'. then How do I know whether it has started recognizing. How do I know whether it has finished recognising?
On 6/25/20, zahra <nasrinkhaksar3@gmail.com> wrote:
hello.
|
|
|
