|
Re: looking for a free synthesiser
Arlene
Hi there: Is it a language barrier with your synth? Is that why you are finding it difficult to upgrade to windows ten? I had to upgrade to ten. My 7 box died. The sound card burned out and some of my usb ports quit working. The computer was funtionable. I had no audio and it was badly slowing down. A sighted worker took it from me. He asked if he can have it after he put my stuff on this system off the hard drive. I said sure. I gave him the windows 7 disks. He scrubbed it and he used it for his video games. He put in an external sound card and disabled the one I had there. Not much longer after that the hard drive went and he just recycled it.
Sent from Mail for Windows 10
From: Ibrahim Ajayi
Sent: July 12, 2020 8:23 PM To: nvda@nvda.groups.io Subject: Re: [nvda] looking for a free synthesiser
At the moment I am still using windows7 32bit. I am finding i difficult to upgrade from windows 7 to 10. So let me know aboutthe synthesizers you talked about. Ibrahim.
On 7/13/20, hurrikennyandopo ... <hurrikennyandopo@...> wrote: > Hi > > > Which version of windows? > > does it have to be in a certain language or is english ok. > > > Speech platform synth/voices might do the trick if before windows 10 I > have not tried them on Windows 10. > > > There is also the speech hub program that will work on computers from 7 > to 10 but only in english. > > > > Gene nz > > > > On 13/07/2020 12:15 pm, Ibrahim Ajayi wrote: >> Hi good people: >> I am in ee of a free synthesizer for NVDA. >> >> Before now, I used the I used the auto language for eloquence. I >> didn't know that that program was a cracked one, and it no longer >> works with NVDA. >> I am not comfortable with the default speech of NVDA which is ESpeak, >> because I don't understand the speech, and it is even too low. I also >> know of narrator, or Microsoft API5, but I am also not comfortable >> with that too. That synthesizer is also too low. >> So, are there any free other synshesisers that I can try out. >> At the moment I am managing the 40-minute version of JAWS. >> Regards. >> I am Ibrahim. >> >> >> > > > >
|
|
|
|
Re: looking for a free synthesiser
At the moment I am still using windows7 32bit. I am finding i
toggle quoted messageShow quoted text
difficult to upgrade from windows 7 to 10. So let me know aboutthe synthesizers you talked about. Ibrahim.
On 7/13/20, hurrikennyandopo ... <hurrikennyandopo@hotmail.com> wrote:
Hi
|
|
|
|
Re: looking for a free synthesiser
hurrikennyandopo ...
Hi
toggle quoted messageShow quoted text
Which version of windows? does it have to be in a certain language or is english ok. Speech platform synth/voices might do the trick if before windows 10 I have not tried them on Windows 10. There is also the speech hub program that will work on computers from 7 to 10 but only in english. Gene nz
On 13/07/2020 12:15 pm, Ibrahim Ajayi wrote:
Hi good people:
|
|
|
|
Re: looking for a free synthesiser
Sky Mundell
Hello. First, Codefactory has a SAPI 5 version of Eloquence that you can get for a price. I don’t have the price on the top of my head, but if you google Eloquence for NVDA code factory Eloquence. Another add-on they have is the Eloquence and Vocaliser expressive add-on for NVDA which also Codefactory makes, and it contains Eloquence and Vocaliser in one add-on. But as for free voices, the only free voices that I know of are TruVoice, and the Microsoft Speech from 1999 with Mary, Mike, and Sam. A slight correction. I think you meant windows one core voices. If your' on windows 10, NVDA doesn’t use ESpeak as the default voice. Instead, you get the one core voices by default if your on windows 10.
toggle quoted messageShow quoted text
I hope this helps. Thanks, Sky.
On Jul 12, 2020, at 5:15 PM, Ibrahim Ajayi <kobisko@gmail.com> wrote:
|
|
|
|
looking for a free synthesiser
Hi good people:
I am in ee of a free synthesizer for NVDA. Before now, I used the I used the auto language for eloquence. I didn't know that that program was a cracked one, and it no longer works with NVDA. I am not comfortable with the default speech of NVDA which is ESpeak, because I don't understand the speech, and it is even too low. I also know of narrator, or Microsoft API5, but I am also not comfortable with that too. That synthesizer is also too low. So, are there any free other synshesisers that I can try out. At the moment I am managing the 40-minute version of JAWS. Regards. I am Ibrahim.
|
|
|
|
Re: nvda not speaking program/icon on the desktop when pressing first letter
Hi,
toggle quoted messageShow quoted text
I suspect NVDA is not being notified about selection changes, sometimes caused by an add-on or a setting interfering with what NVDA is supposed to do. To test, try restarting with all add-ons disabled, and if that solves the issue, we can move onto isolating individual add-ons. Cheers, Joseph
-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene Sent: Sunday, July 12, 2020 1:00 PM To: nvda@nvda.groups.io Subject: Re: [nvda] nvda not speaking program/icon on the desktop when pressing first letter The original message doesn't say there is no speech. It gives one specific condition where there is no speech, when you use first letter navigation in a list. Since there is speech, the possible solutions don't apply. I have no reason why no speech occurs at that one specific time. Using read current line should easily solve the problem and the command takes almost no time to execute. It may be possible to find the reason by examining the log but there are some problems that are so minor and so easily worked around that they aren't worth solving, though you may, if you wish to, pursue it, of course. Gene -----Original Message----- From: hurrikennyandopo ... Sent: Sunday, July 12, 2020 2:37 PM To: nvda@nvda.groups.io Subject: Re: [nvda] nvda not speaking program/icon on the desktop when pressing first letter Hi I am sure you would of checked the following on the computer. One that his speakers are plugged into the right whole and turned on. On the computer the sound is not muted. Press the windows key + letter R to bring up the run dialogue then type in sndvol then press the enter key. The next screen that comes up will have the master volume make sure it is right up so you can hear it and not down on zero. There is a box under it if checked it will mute the sound so make sure it is un checked. If you can see nvda is running but not talking under that section I think there is a slider to make it louder there. Also check when nvda is running that under the synth settings in nvda you press the nvda key + ctrl key + the letter S to bring it up. Make sure under the synth section that it has a synth there and not set to no speech if it is set to that change it to e speak or another synth package. Gene nz On 13/07/2020 2:25 am, Fresh Start wrote: Hi All, I am using NVDA 20.1 on a client's windows ten pro laptop. When on the desktop or in a list of programs or files, NVDA doesn't speak the name of a program or file when pressing it's first letter. However, the cursor does go to the location. I know this by arrowing up and then down. I tried maximizing but didn't cause any change in behavior. Any ideas to resolve the problem? Thanks in advance. Subscribe to the Fresh Start Daily Devotion by sending a message to the e-mail address shown below with subscribe in the subject field. dan@jvillefreshstart.org Unsubscribe from the Fresh Start Daily Devotion by sending a message to the e-mail address shown below with unsubscribe in the subject field. dan@jvillefreshstart.org "Trust in the LORD with all your heart And do not lean on your own understanding. In all your ways acknowledge Him, And He will make your paths straight." (Proverbs 3:5,6 NIV)
|
|
|
|
Re: nvda not speaking program/icon on the desktop when pressing first letter
Gene
The original message doesn't say there is no speech. It gives one specific condition where there is no speech, when you use first letter navigation in a list. Since there is speech, the possible solutions don't apply.
toggle quoted messageShow quoted text
I have no reason why no speech occurs at that one specific time. Using read current line should easily solve the problem and the command takes almost no time to execute. It may be possible to find the reason by examining the log but there are some problems that are so minor and so easily worked around that they aren't worth solving, though you may, if you wish to, pursue it, of course. Gene
-----Original Message-----
From: hurrikennyandopo ... Sent: Sunday, July 12, 2020 2:37 PM To: nvda@nvda.groups.io Subject: Re: [nvda] nvda not speaking program/icon on the desktop when pressing first letter Hi I am sure you would of checked the following on the computer. One that his speakers are plugged into the right whole and turned on. On the computer the sound is not muted. Press the windows key + letter R to bring up the run dialogue then type in sndvol then press the enter key. The next screen that comes up will have the master volume make sure it is right up so you can hear it and not down on zero. There is a box under it if checked it will mute the sound so make sure it is un checked. If you can see nvda is running but not talking under that section I think there is a slider to make it louder there. Also check when nvda is running that under the synth settings in nvda you press the nvda key + ctrl key + the letter S to bring it up. Make sure under the synth section that it has a synth there and not set to no speech if it is set to that change it to e speak or another synth package. Gene nz On 13/07/2020 2:25 am, Fresh Start wrote: Hi All, I am using NVDA 20.1 on a client’s windows ten pro laptop. When on the desktop or in a list of programs or files, NVDA doesn’t speak the name of a program or file when pressing it’s first letter. However, the cursor does go to the location. I know this by arrowing up and then down. I tried maximizing but didn’t cause any change in behavior. Any ideas to resolve the problem? Thanks in advance. Subscribe to the Fresh Start Daily Devotion by sending a message to the e-mail address shown below with subscribe in the subject field. dan@jvillefreshstart.org Unsubscribe from the Fresh Start Daily Devotion by sending a message to the e-mail address shown below with unsubscribe in the subject field. dan@jvillefreshstart.org “Trust in the LORD with all your heart And do not lean on your own understanding. In all your ways acknowledge Him, And He will make your paths straight.” (Proverbs 3:5,6 NIV)
|
|
|
|
Re: nvda not speaking program/icon on the desktop when pressing first letter
hurrikennyandopo ...
Hi
Another that just come to mind is you might of accidentally turned off speech on nvda.
Use the nvda key + letter S to toggle between no speech, beep and talk then save your settings with the ctrl key + nvda key + the letter C
i guess it could easily be done if you wanted to change your synth settings but missed out the ctrl key .
Gene nz
nz
On 13/07/2020 2:25 am, Fresh Start
wrote:
|
|
|
|
Re: nvda not speaking program/icon on the desktop when pressing first letter
hurrikennyandopo ...
Hi
I am sure you would of checked the following on the computer.
One that his speakers are plugged into the right whole and turned on.
On the computer the sound is not muted.
Press the windows key + letter R to bring up the run dialogue then type in sndvol then press the enter key.
The next screen that comes up will have the master volume make sure it is right up so you can hear it and not down on zero.
There is a box under it if checked it will mute the sound so make sure it is un checked.
If you can see nvda is running but not talking under that section I think there is a slider to make it louder there.
Also check when nvda is running that under the synth settings in nvda you press the nvda key + ctrl key + the letter S to bring it up.
Make sure under the synth section that it has a synth there and not set to no speech if it is set to that change it to e speak or another synth package.
Gene nz
On 13/07/2020 2:25 am, Fresh Start
wrote:
|
|
|
|
Re: Subscribing/Unsubscribing from the NVDA Group on Groups.io
On Sun, Jul 12, 2020 at 01:23 AM, zahra wrote:
fortunately it worked for me!- Glad to hear it. After posting the instructions I posted, I decided to dig in to the Groups.io static help page, where I was not surprised to find this: I Am On Gmail And I Don't Like Getting Copies Of My Messages To turn off duplicate emails, log into your account. Then look for the dropdown in the top right corner of the page, which will be either your name or email address. Click that and then click Account. From your Account page, click the Preferences sidebar tab. Look for the 'I always want copies of my own messages' checkbox and uncheck that. Then click the Update Preferences button. -- Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363 Science has become just another voice in the room; it has lost its platform. Now, you simply declare your own truth. ~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine Sentiment Took Hold in the United States, September 23, 2019
|
|
|
|
nvda not speaking program/icon on the desktop when pressing first letter
Fresh Start
Hi All, I am using NVDA 20.1 on a client’s windows ten pro laptop. When on the desktop or in a list of programs or files, NVDA doesn’t speak the name of a program or file when pressing it’s first letter. However, the cursor does go to the location. I know this by arrowing up and then down. I tried maximizing but didn’t cause any change in behavior. Any ideas to resolve the problem? Thanks in advance. Subscribe to the Fresh Start Daily Devotion by sending a message to the e-mail address shown below with subscribe in the subject field.
Unsubscribe from the Fresh Start Daily Devotion by sending a message to the e-mail address shown below with unsubscribe in the subject field. “Trust in the LORD with all your heart And do not lean on your own understanding. In all your ways acknowledge Him, And He will make your paths straight.” (Proverbs 3:5,6 NIV)
|
|
|
|
Re: Subscribing/Unsubscribing from the NVDA Group on Groups.io
fortunately it worked for me!
toggle quoted messageShow quoted text
i am very glad, thanks so much brian, luke, gene for your helps and God bless you all!
On 7/12/20, zahra ayat <nasrinkhaksar3@gmail.com> wrote:
brian, --
By God, were I given all the seven heavens with all they contain in order that I may disobey God by depriving an ant from the husk of a grain of barley, I would not do it. imam ali
|
|
|
|
Re: Subscribing/Unsubscribing from the NVDA Group on Groups.io
brian,
toggle quoted messageShow quoted text
i went to nvda.groups.io made a password for myself. logged in to my account, and then, selected zahra, then expanded the menu and found my account. under account, i selected preferences and unchecked the option that tell me if i want to have copy of my messages and updated my preferences. hope that this method works for me and i dont have duplicate messages of myself in my nvda folder!
On 7/7/20, Brian Vogel <britechguy@gmail.com> wrote:
On Tue, Jul 7, 2020 at 07:53 AM, zahra wrote:You know, Zahra, you have already been given explicit instructions on where --
By God, were I given all the seven heavens with all they contain in order that I may disobey God by depriving an ant from the husk of a grain of barley, I would not do it. imam ali
|
|
|
|
Re: I have purchased vocalizer expressive, but where is my license key
Laughing Thunder
You use your account credentials to login after you install the NVDA add-on and voices you want. Then you can activate it.
toggle quoted messageShow quoted text
On 7/10/2020 8:35 AM, Socheat Muth wrote:
Hi all, especially to the developer of the vocalizer expressive for NVDA --
Laughingthunder
|
|
|
|
Re: nvda not reading powershell output.
Luke Davis
I spoke too soon. These options no longer appear to have an effect on power shell.
toggle quoted messageShow quoted text
Another question: are you running as: (1) A normal user; (2) an administrative user; or (3) an elevated power shell? Luke On Fri, 10 Jul 2020, Luke Davis wrote some irrelevant nonsense:
First let me say that I do not now have this problem on NVDA alpha and Win 10 2004, but have had it in the past.
|
|
|
|
Re: nvda not reading powershell output.
Luke Davis
First let me say that I do not now have this problem on NVDA alpha and Win 10 2004, but have had it in the past.
toggle quoted messageShow quoted text
Under NVDA advanced settings, how do you have things configured? My settings are as follows: Use UI Automation to access the windows console when available: not checked. Use the new typed character support in Windows console when available: checked. Luke
On Fri, 10 Jul 2020, Austin Pinto wrote:
tried this on windows 10 2004 and latest windows insider build.
|
|
|
|
Re: NVDA saying unknown again in browsers
Kenny Nead <knead54@...>
Then it is something like $90, or $99 something like that a year.
toggle quoted messageShow quoted text
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene Sent: Friday, July 10, 2020 6:07 PM To: nvda@nvda.groups.io Subject: Re: [nvda] NVDA saying unknown again in browsers As the message said, it is free until the end of August. You can use it as a full version. It is a way for the current owners of JAWS to perform a public service during this time when so much communication is being done with computers and from home. Gene -----Original Message----- From: Arlene Sent: Friday, July 10, 2020 6:03 PM To: nvda@nvda.groups.io Subject: Re: [nvda] NVDA saying unknown again in browsers Hi, is it free for those who don’t have Jaws on their system? I have it. It was given to me as a gift. I have both it and NVDA. Sent from Mail for Windows 10 From: Kenny Nead Sent: July 10, 2020 7:21 AM To: nvda@nvda.groups.io Subject: Re: [nvda] NVDA saying unknown again in browsers And right now it is free till end of August. From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Scott Berry Sent: Friday, July 10, 2020 8:38 AM To: nvda@nvda.groups.io Subject: Re: [nvda] NVDA saying unknown again in browsers That's not true. You might just want to give Jaws 2020 a try. It's pretty damn good. On 7/9/2020 3:52 PM, g melconian wrote: Thanks but no thanks. None of my business apps work correctly with JAWS to begin with.everything needs to be scripted and cost an arm and a leg where as it will work out of the box with NVDA and Window Eyes like quickbooks, tax applications like tax act, and so on.I am not going to waste my time with a company who has no clue how to optimize their producs to work without haveot scripting to the moon to get them to work.they should just work out of the box with the screen reader without all this heavy programming and scripting knowledge. From: nvda@nvda.groups.io mailto:nvda@nvda.groups.io On Behalf Of Kenny Nead Sent: Thursday, July 9, 2020 2:44 PM To: nvda@nvda.groups.io Subject: Re: [nvda] NVDA saying unknown again in browsers If you are wondering about Jaws, on the Freedom Scientific web site, you can get Jaws free till the end of August, good way to try the Jaws 2020 out. From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of g melconian Sent: Thursday, July 9, 2020 4:36 PM To: nvda@nvda.groups.io Subject: Re: [nvda] NVDA saying unknown again in browsers Thast good to know. I think more and more of the windows 10 pro features are all coming to home versions in some sort or fashion.same like you I have one pro machine for my financial / consulting business. All the others in the house are home windows 10 pcs with NVDA an older version of Window Eyes and JAWS , on them. What can I do and there is no compeling reason to upgrade to the latest JAWS as they don’t offer much lately just bells and whistles and gimmicks that I cant se myself using.as I am on business applications an make use of the web JAWS is a pig as far as resources when it comes to the web over my old Window Eyes or NVDA. From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Kenny Nead Sent: Thursday, July 9, 2020 2:06 PM To: nvda@nvda.groups.io Subject: Re: [nvda] NVDA saying unknown again in browsers Thank you! From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian Vogel Sent: Thursday, July 9, 2020 3:07 PM To: nvda@nvda.groups.io Subject: Re: [nvda] NVDA saying unknown again in browsers Kenny, Unless there is something specific in Pro that you simply must have, I see no compelling reason to change edition from Home to Pro. It's really a personal choice. I'd still be on Home except for the fact that I have enough clients on Pro that when I need to troubleshoot something "Pro-specific" it's handy to have one machine that has Pro. All the other Windows 10 machines in my household are Windows 10 Home. Cearbhall, No great surprise there, and I'm glad that a demonstration has been made of the "intelligence" of the Windows 10 installer. There was a time where you could actually force update a machine that was displaying the "not quite ready" message in the Windows Update Pane. This never made the slightest sense to me, as if Microsoft deems the hardware "not ready" it's not ready, and any one of the ways of upgrading to the next Feature Update should detect that, and give a, "Whoa, Nelly!!," type message saying that the update cannot yet be done. Whatever method it was you used to try to force it clearly detected the "not ready" state and aborted, as it should. That is, unless I'm misreading you and you're saying that you manually aborted a force update as soon as you had the opportunity after kicking it off. In which case, ignore all that came before. -- Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363 Science has become just another voice in the room; it has lost its platform. Now, you simply declare your own truth. ~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine Sentiment Took Hold in the United States, September 23, 2019
|
|
|
|
Re: NVDA saying unknown again in browsers
Gene
As the message said, it is free until the end of August. You can use it as a full version.
toggle quoted messageShow quoted text
It is a way for the current owners of JAWS to perform a public service during this time when so much communication is being done with computers and from home. Gene
-----Original Message-----
From: Arlene Sent: Friday, July 10, 2020 6:03 PM To: nvda@nvda.groups.io Subject: Re: [nvda] NVDA saying unknown again in browsers Hi, is it free for those who don’t have Jaws on their system? I have it. It was given to me as a gift. I have both it and NVDA. Sent from Mail for Windows 10 From: Kenny Nead Sent: July 10, 2020 7:21 AM To: nvda@nvda.groups.io Subject: Re: [nvda] NVDA saying unknown again in browsers And right now it is free till end of August. From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Scott Berry Sent: Friday, July 10, 2020 8:38 AM To: nvda@nvda.groups.io Subject: Re: [nvda] NVDA saying unknown again in browsers That's not true. You might just want to give Jaws 2020 a try. It's pretty damn good. On 7/9/2020 3:52 PM, g melconian wrote: Thanks but no thanks. None of my business apps work correctly with JAWS to begin with.everything needs to be scripted and cost an arm and a leg where as it will work out of the box with NVDA and Window Eyes like quickbooks, tax applications like tax act, and so on.I am not going to waste my time with a company who has no clue how to optimize their producs to work without haveot scripting to the moon to get them to work.they should just work out of the box with the screen reader without all this heavy programming and scripting knowledge. From: nvda@nvda.groups.io mailto:nvda@nvda.groups.io On Behalf Of Kenny Nead Sent: Thursday, July 9, 2020 2:44 PM To: nvda@nvda.groups.io Subject: Re: [nvda] NVDA saying unknown again in browsers If you are wondering about Jaws, on the Freedom Scientific web site, you can get Jaws free till the end of August, good way to try the Jaws 2020 out. From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of g melconian Sent: Thursday, July 9, 2020 4:36 PM To: nvda@nvda.groups.io Subject: Re: [nvda] NVDA saying unknown again in browsers Thast good to know. I think more and more of the windows 10 pro features are all coming to home versions in some sort or fashion.same like you I have one pro machine for my financial / consulting business. All the others in the house are home windows 10 pcs with NVDA an older version of Window Eyes and JAWS , on them. What can I do and there is no compeling reason to upgrade to the latest JAWS as they don’t offer much lately just bells and whistles and gimmicks that I cant se myself using.as I am on business applications an make use of the web JAWS is a pig as far as resources when it comes to the web over my old Window Eyes or NVDA. From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Kenny Nead Sent: Thursday, July 9, 2020 2:06 PM To: nvda@nvda.groups.io Subject: Re: [nvda] NVDA saying unknown again in browsers Thank you! From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian Vogel Sent: Thursday, July 9, 2020 3:07 PM To: nvda@nvda.groups.io Subject: Re: [nvda] NVDA saying unknown again in browsers Kenny, Unless there is something specific in Pro that you simply must have, I see no compelling reason to change edition from Home to Pro. It's really a personal choice. I'd still be on Home except for the fact that I have enough clients on Pro that when I need to troubleshoot something "Pro-specific" it's handy to have one machine that has Pro. All the other Windows 10 machines in my household are Windows 10 Home. Cearbhall, No great surprise there, and I'm glad that a demonstration has been made of the "intelligence" of the Windows 10 installer. There was a time where you could actually force update a machine that was displaying the "not quite ready" message in the Windows Update Pane. This never made the slightest sense to me, as if Microsoft deems the hardware "not ready" it's not ready, and any one of the ways of upgrading to the next Feature Update should detect that, and give a, "Whoa, Nelly!!," type message saying that the update cannot yet be done. Whatever method it was you used to try to force it clearly detected the "not ready" state and aborted, as it should. That is, unless I'm misreading you and you're saying that you manually aborted a force update as soon as you had the opportunity after kicking it off. In which case, ignore all that came before. -- Brian - Windows 10 Pro, 64-Bit, Version 1909, Build 18363 Science has become just another voice in the room; it has lost its platform. Now, you simply declare your own truth. ~ Dr. Paul A. Offit, in New York Times article, How Anti-Vaccine Sentiment Took Hold in the United States, September 23, 2019
|
|
|
|
Re: NVDA saying unknown again in browsers
Arlene
Hi, is it free for those who don’t have Jaws on their system? I have it. It was given to me as a gift. I have both it and NVDA.
Sent from Mail for Windows 10
From: Kenny Nead
Sent: July 10, 2020 7:21 AM To: nvda@nvda.groups.io Subject: Re: [nvda] NVDA saying unknown again in browsers
And right now it is free till end of August.
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Scott Berry
That's not true. You might just want to give Jaws 2020 a try. It's pretty damn good.
On 7/9/2020 3:52 PM, g melconian wrote:
|
|
|
|
Re: addon
hurrikennyandopo ...
Hi
The link you gave is broken but have searched for it and will paste here at https://github.com/davidacm/EnhancedPhoneticReading
It is working with nvda 2020.1
Gene nz
On 11/07/2020 12:06 am, Rui Fontes
wrote:
|
|
|
