Date   

Re: NVDA not able to install completely and gives error

David Griffith
 

I believe the command is to kill a running process – not uninstall the program.

What is the problematic install?

Is Add Remove not working?

Sometimes programs include their own uninstall code in the program folder  it has installed into.

Some anti virus programs require special utilities.

 

David G.

 

Sent from Mail for Windows 10

 

From: Arlene
Sent: 04 September 2020 04:35
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA not able to install completely and gives error

 

Hi, will that do it to any other program you might want rid of? I have a friend who has trouble getting rid of a program. She’s sighted.

 

Sent from Mail for Windows 10

 

From: Jim Pipczak
Sent: September 3, 2020 5:37 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA not able to install completely and gives error

 

Hi,

 

Press Windows r to bring up the run dialogue box and then type tskill nvda and press the enter key.

 

This will kill the NVDA process. Then reinstall NVDA.

 

Thanks,

Jim

 

-----Original Message-----

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Mohd. Ahtesham Shaikh

Sent: Thursday, 3 September 2020 8:07 PM

To: nvda@nvda.groups.io

Subject: [nvda] NVDA not able to install completely and gives error

 

Dear all,

Hope all are fine.

I am facing an issue with NVDA.

Suddenly NVDA stopped working and I tried installing it again.

After installation I am hearing jaws say NVDA is not responding and there is a blank dialogue box appearing at the center of the screen.

I tried re-installing several times after completely uninstalling but does not work.

Is there any solution to this problem.

I am using Windows 10 on 64 bit I3 laptop.

 

 

 

Thanks,

 

Ahtesham

 

 

--

Mohd. Ahtesham

From India

Using Windows 8.1 at home and windows 10 pro in office

 

 

 

 

Jim Pipczak

Access Technology Service Development Lead

Client Services

Vision Australia

14 & 17 Barrett Street Kensington VIC 3031

 

M: +614 3375 7598 T: +613 8378 1243 (I: 344243)

E: Jim.Pipczak@...

www.visionaustralia.org

 

 

Vision Australia is committed to supporting the blind and low vision community through COVID-19. Find out about our response and free support resources online at www.visionaustralia.org/COVID19.

 

[Vision Australia. Blindness. Low Vision.  Opportunity. - logo]

 

[Vision Australia. Winner of the Australian HR Award for Best Workplace Diversity and Inclusion Program. - logo]

 

Vision Australia acknowledges Aboriginal and Torres Strait Islander people as the traditional custodians of the land on which we operate. We have an inclusive culture and value diversity and all abilities.

 

 

 

 

 


Re: NVDA not able to install completely and gives error

Hettie <woehler.hettie@...>
 

Hi Gen

Thanks for this information as I can use it now too when removing a program.


Hettie

On 2020/09/03 11:28 pm, hurrikennyandopo ... wrote:
Hi Ahtesham


When you said you completely uninstalled nvda from your computer was that just from the area in the control pannel called program and features? where it was uninstalled.


If this is the case you might have to do the following when NVDA has been uninstalled from there.


Press the windows key + letter R then in the run dialogue box type the following %appdata% then press the enter key. You will be given a list of folders locate the one for NVDA and delete it. Then close that screen with the alt + f4 key.


Then go back and reinstall NVDA to your computer to be safe some times grab a fresh copy of nvda from NVACCESS then reinstall it to your computer.


Hopefully that fixes your problem.

You might need another screen reader to do this which I think you mentioned jaws but any one should do.


Gene nz



On 3/09/2020 10:07 pm, Mohd. Ahtesham Shaikh wrote:
Dear all,
Hope all are fine.
I am facing an issue with NVDA.
Suddenly NVDA stopped working and I tried installing it again.
After installation I am hearing jaws say NVDA is not responding and
there is a blank dialogue box appearing at the center of the screen.
I tried re-installing several times after completely uninstalling but
does not work.
Is there any solution to this problem.
I am using Windows 10 on 64 bit I3 laptop.



Thanks,

Ahtesham

--
This email has been checked for viruses by AVG.
https://www.avg.com


Re: accessible SIP client

Iván Novegil
 

Try MicroSIP, you'll need to use object navigation in some scenarios but it's usable.


Regards.

Iván Novegil Cancelas
Editor
ivan.novegil@...



Comunidad hispanohablante de NVDA | Proyecto NVDA.es
- www.NVDA.es
- @nvda_es

Usuario do NVDA en galego

***Esta mensaxe e/ou os seus adxuntos están dirixidos ao seu destinatario e poden conter información privilexiada ou confidencial. A utilización, copia ou divulgación dos mesmos por parte de alguén diferente do destinatario mencionado non están permitidas sen autorización. Se recibiu esta mensaxe por erro pregámoslle o comunique por esta mesma vía e a destrúa.***

O 04/09/2020 á(s) 6:29, Rob Hudson escribiu:

The company I'm starting with uses a program called Zoiper. It's what I would call marginally usable, meaning NVDA sometimes can't find where it's supposed to be and clicks the wrong thing.
Would like to know of a recommendation for an accessible SIP client/softphone I could switch to, if the company gives me permission to, that is. Thanks.




Re: multiple instances of NVDA

Luke Davis
 

As a followup for the archive: I have created an issue for this, with attached logs as Quentin requested.

https://github.com/nvaccess/nvda/issues/11553

Luke

On Fri, 21 Aug 2020, Luke Davis wrote:

On Fri, 21 Aug 2020, Quentin Christensen wrote:

Interesting, I regularly restart NVDA and I don't recall ever seeing it from that.  Do you have any add-ons?
Several. Nothing particularly unusual though.
W10 App Essentials, Add-on Updater, Speech History, Bluetooth Audio, Add-on Documentation, Remote, Classic Selection, debugHelper, Dropbox, Easy Table Nav, Mozilla Apps Enhancements, Notepad++, Outlook Extended, Object Detection, Synth Ring Settings Selector, Virtual Review.

Also, while I run into this literally a few times per week, I have been unable to repro it on latest alpha yet. Of course, now that I said it happens all the time, it isn't happening today.


accessible SIP client

Rob Hudson
 

The company I'm starting with uses a program called Zoiper. It's what I would call marginally usable, meaning NVDA sometimes can't find where it's supposed to be and clicks the wrong thing.
Would like to know of a recommendation for an accessible SIP client/softphone I could switch to, if the company gives me permission to, that is. Thanks.


Re: Unspoken 0.4 is now release #addonrelease

Leslie
 

What is Unspoken?  Is it a new voice for NVDA.?  I like the 1 core voices very much, but I love to change to a new voice every once in a while.  I have lots of voices on my cell phone and each talking voice has its own personality even though it’s a computer voice.  Variety is the spice of life, I think.

 

Sent from Mail for Windows 10

 

From: rowen brian
Sent: Thursday, September 3, 2020 7:02 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Unspoken 0.4 is now release #addonRelease

 

Hello, can you provide a shortcut key to switch the sound?

 


Re: NVDA not able to install completely and gives error

Arlene
 

Hi, will that do it to any other program you might want rid of? I have a friend who has trouble getting rid of a program. She’s sighted.

 

Sent from Mail for Windows 10

 

From: Jim Pipczak
Sent: September 3, 2020 5:37 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA not able to install completely and gives error

 

Hi,

 

Press Windows r to bring up the run dialogue box and then type tskill nvda and press the enter key.

 

This will kill the NVDA process. Then reinstall NVDA.

 

Thanks,

Jim

 

-----Original Message-----

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Mohd. Ahtesham Shaikh

Sent: Thursday, 3 September 2020 8:07 PM

To: nvda@nvda.groups.io

Subject: [nvda] NVDA not able to install completely and gives error

 

Dear all,

Hope all are fine.

I am facing an issue with NVDA.

Suddenly NVDA stopped working and I tried installing it again.

After installation I am hearing jaws say NVDA is not responding and there is a blank dialogue box appearing at the center of the screen.

I tried re-installing several times after completely uninstalling but does not work.

Is there any solution to this problem.

I am using Windows 10 on 64 bit I3 laptop.

 

 

 

Thanks,

 

Ahtesham

 

 

--

Mohd. Ahtesham

From India

Using Windows 8.1 at home and windows 10 pro in office

 

 

 

 

Jim Pipczak

Access Technology Service Development Lead

Client Services

Vision Australia

14 & 17 Barrett Street Kensington VIC 3031

 

M: +614 3375 7598 T: +613 8378 1243 (I: 344243)

E: Jim.Pipczak@...

www.visionaustralia.org

 

 

Vision Australia is committed to supporting the blind and low vision community through COVID-19. Find out about our response and free support resources online at www.visionaustralia.org/COVID19.

 

[Vision Australia. Blindness. Low Vision.  Opportunity. - logo]

 

[Vision Australia. Winner of the Australian HR Award for Best Workplace Diversity and Inclusion Program. - logo]

 

Vision Australia acknowledges Aboriginal and Torres Strait Islander people as the traditional custodians of the land on which we operate. We have an inclusive culture and value diversity and all abilities.

 

 

 

 


Re: Unspoken 0.4 is now release #addonrelease

rowen brian <manchen0528@...>
 

Hello, can you provide a shortcut key to switch the sound?


Re: NVDA not able to install completely and gives error

Jim Pipczak
 

Hi,

Press Windows r to bring up the run dialogue box and then type tskill nvda and press the enter key.

This will kill the NVDA process. Then reinstall NVDA.

Thanks,
Jim

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Mohd. Ahtesham Shaikh
Sent: Thursday, 3 September 2020 8:07 PM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA not able to install completely and gives error

Dear all,
Hope all are fine.
I am facing an issue with NVDA.
Suddenly NVDA stopped working and I tried installing it again.
After installation I am hearing jaws say NVDA is not responding and there is a blank dialogue box appearing at the center of the screen.
I tried re-installing several times after completely uninstalling but does not work.
Is there any solution to this problem.
I am using Windows 10 on 64 bit I3 laptop.



Thanks,

Ahtesham


--
Mohd. Ahtesham
From India
Using Windows 8.1 at home and windows 10 pro in office




Jim Pipczak
Access Technology Service Development Lead
Client Services
Vision Australia
14 & 17 Barrett Street Kensington VIC 3031

M: +614 3375 7598 T: +613 8378 1243 (I: 344243)
E: Jim.Pipczak@visionaustralia.org
www.visionaustralia.org


Vision Australia is committed to supporting the blind and low vision community through COVID-19. Find out about our response and free support resources online at www.visionaustralia.org/COVID19.

[Vision Australia. Blindness. Low Vision. Opportunity. - logo]

[Vision Australia. Winner of the Australian HR Award for Best Workplace Diversity and Inclusion Program. - logo]

Vision Australia acknowledges Aboriginal and Torres Strait Islander people as the traditional custodians of the land on which we operate. We have an inclusive culture and value diversity and all abilities.


Re: NVDA not able to install completely and gives error

hurrikennyandopo ...
 

Hi Ahtesham


When you said you completely uninstalled nvda from your computer was that just from the area in the control pannel called program and features? where it was uninstalled.


If this is the case you might have to do the following when NVDA has been uninstalled from there.


Press the windows key + letter R then in the run dialogue box type the following %appdata% then press the enter key. You will be given a list of folders locate the one for NVDA and delete it. Then close that screen with the alt + f4 key.


Then go back and reinstall NVDA to your computer to be safe some times grab a fresh copy of nvda from NVACCESS then reinstall it to your computer.


Hopefully that fixes your problem.

You might need another screen reader to do this which I think you mentioned jaws but any one should do.


Gene nz

On 3/09/2020 10:07 pm, Mohd. Ahtesham Shaikh wrote:
Dear all,
Hope all are fine.
I am facing an issue with NVDA.
Suddenly NVDA stopped working and I tried installing it again.
After installation I am hearing jaws say NVDA is not responding and
there is a blank dialogue box appearing at the center of the screen.
I tried re-installing several times after completely uninstalling but
does not work.
Is there any solution to this problem.
I am using Windows 10 on 64 bit I3 laptop.



Thanks,

Ahtesham


Re: Access regarding email with quotations and screen readers, NVDA, in this case

 

Dave,

              In playing with NVDA the recommendation about using the comma command to jump out of a block quote to new material works.  I just didn't know it existed.

              Now, mind you, I wish that the various levels of quotation were each considered their own container, and that some command not as yet in existence would only go to the next level out, with the separate comma command allowing you to jump out of the entire set of stacked quotations to the new material (which it does now, but with the block quote, no matter how many levels it contains, treated as a single, atomic container).

--

Brian - Windows 10 Pro, 64-Bit, Version 2004, Build 19041  

A gentleman is one who never hurts anyone's feelings unintentionally.

          ~ Oscar Wilde

 


Re: Access regarding email with quotations and screen readers, NVDA, in this case

Dave Grossoehme
 

Good Day:  I'm like you as far as using a computer and reading email for years.  It would seem like you set an item in the screen reader to find the time stamps in the background in order to go to the newest information.  This is just a guest on my part, however, why couldn't something like this be tried.

Dave


On 8/26/2020 2:37 PM, Brian Vogel wrote:
I don't know whether this is something NVDA (or any screen reader) should address, or if the issue should be solved elsewhere, but a screen reader then able to pick up the change.

It is very, very common practice for e-mail conversations to take on a "quote, reply, quote, reply, quote, reply" format.  This is all the more true when a very long exchange is taking place, involving multiple participants, and it would be entirely unclear what was being responded to without retaining something from a prior message or messages to set the stage.

In "the old days" of plain text email, quotation was indicated by the presence of the greater than character, >, at the beginning of a line and the number of greater thans indicated how many times something had been quoted, as there are often quotes that quote previous quotes.  While this certainly worked, it was visually very messy as quote depth increased.

Now in the age of HTML e-mail, the use of characters to indicate quotation has gone by the wayside and now visual bars are used in much the same manner.  They're semi-transparent and for each requotation another bar appears, so if someone had quoted someone else who had already quoted someone before them, there would be three bars stacked, to show who quoted what.

In any event, for those of us who can see, we are able to scan the page visually and jump almost instantly to the new material that resides beneath each quote sequence after reading whatever portion of the quoted material they need to in order to get themselves up to speed before reading that new material.

I have never found a way for a screen reader user to do "direct jumps" to new material with a screen reader.  Screen readers don't seem to differentiate in any meaningful way between quoted and fresh material, and give screen reader users a way to jump between chunks of that fresh material when they wish to do so.

Am I missing something?   Is there already a way this can be done with ease?  If there is, I don't know what it is and I have plenty of evidence that most screen reader users don't, either, even those who've been using them for a very, very long time.

If there isn't, is there some roadblock to making a screen reader able to recognize where quoted text ends and new material begins?  Since there has to be something behind the scenes that creates those bar structures that I see, I have to believe that a screen reader has access to that same information, and that it would be relatively simply (note, relatively) to create a keyboard shortcut that causes all quoted material to be skipped and focus thrown to the first word of the unquoted material after it. 

I've been using e-mail since the 1980s, and I can say without question that the custom in the blind community of putting all new content at the top is not even close to universal.  And given how well a "quote response quote response" format is for sighted email users, it's never going to go away.  It seems there should be some way for screen reader users to do the rough equivalent of reading whatever part of the quoted material they might wish, but after having heard it being able to jump instantly past any that follows where they've stopped and go straight to the new material beneath the quote.

I know that there are a number of regulars here who are NVDA developers, add-on developers, or similarly positioned to have a lot of insight about this, so I'm asking.

--

Brian - Windows 10 Pro, 64-Bit, Version 2004, Build 19041  

A gentleman is one who never hurts anyone's feelings unintentionally.

          ~ Oscar Wilde

 


NVDA not able to install completely and gives error

Mohd. Ahtesham Shaikh
 

Dear all,
Hope all are fine.
I am facing an issue with NVDA.
Suddenly NVDA stopped working and I tried installing it again.
After installation I am hearing jaws say NVDA is not responding and
there is a blank dialogue box appearing at the center of the screen.
I tried re-installing several times after completely uninstalling but
does not work.
Is there any solution to this problem.
I am using Windows 10 on 64 bit I3 laptop.



Thanks,

Ahtesham


--
Mohd. Ahtesham
From India
Using Windows 8.1 at home and windows 10 pro in office


Re: Zoom Enhancements Addon for NVDA

Eilana Benish
 

Hello David

you can read the email thread from the 28.08.2020

So please be aware of what you are implying before testing the add-on

 

 

 

ובכבוד רב | Sincerely,

אילנה בניש מורשה נגישות שירות 2200 | Eilana Benish, service Accessibility authorized (2200)

ניהול פרויקטים – נגישות ושמישות אינטרנט וטכנולוגיות מידע  | Projects manager – Accessibility & usability on internet and ICT

📱 +972-50-7100367 | 📧 benish.ilana@...  

נכתב על ידי David Goldfield, ב־30/08/2020 בשעה 09:24:

I was browsing Facebook and saw an announcement about a new addon for the NVDA screen reader which promises some additional functionality when using Zoom. I offer the following caveats.


1. I don't know if this particular addon has been vetted by the NVDA community. This doesn't in any way mean that the addon is harmful.

2. While I do use the NVDA screen reader I have not yet tested this addon and so I cannot offer any support or feedback as to its usefulness.

3. Because of this I am not endorsing this addon and so I am not responsible if it does have any negative side effects on your machine or when using Zoom.

Here is an extract from the Github page where this addon is located, along with a URL to obtain it.


Zoom Accessibility enhancements add-on for NVDA
By: Mohamad Suliman and Eilana Benish

This add-on will improve the experience of using Zoom for NVDA users by providing keyboard shortcuts to Handle alerts for Different events While In a meeting, make the process of remote control much more accessible and smoother, and more...

keyboard shortcuts for controlling alerts In meetings
NVDA + Shift + A: cycles between different modes of reporting alerts. The following modes are available:
Report all alerts mode, where all alerts are reported as usual
Beep for alerts, where NVDA will play a short beep for every alert displayed in Zoom
Silence all alerts, where NVDA will ignore all alerts
Custom mode, Where the user can customize which alerts they want to have and which not. This can be done using the settings dialog of the add-on, or by using the dedicated keyboard shortcuts for that
The following shortcuts can be used to toggle on / off the announcements of each type of alert (note that this will be effective when custom mode is selected):

NVDA + Ctrl + 1: Participant Has Joined/Left Meeting (Host Only)
NVDA + Ctrl + 2: Participant Has Joined/Left Waiting Room (Host Only)
NVDA + Ctrl + 3: Audio Muted by Host
NVDA + Ctrl + 4: Video Stopped by Host
NVDA + Ctrl + 5: Screen Sharing Started/Stopped by a Participant
NVDA + Ctrl + 6: Recording Permission Granted/Revoked
NVDA + Ctrl + 7: Public In-meeting Chat Received
NVDA + Ctrl + 8: Private In-meeting Chat Received
NVDA + Ctrl + 9: In-meeting File Upload Completed
NVDA + Ctrl + 0: Host Privilege Granted/Revoked
NVDA + Shift + Ctrl + 1: Participant Has Raised/Lowered Hand (Host Only)
NVDA + Shift + Ctrl + 2: Remote Control Permission Granted/Revoked
NVDA + Shift + Ctrl + 3: IM chat message received
Note that you need to leave reporting all alert types selected (in Zoom accessibility settings) to have the add-on function as expected.

Keyboard shortcut for Opening add on Dialogue
NVDA + Z Opens the add-on dialog !

Using this dialog you can :

See which alerts are announced and which aren't
Select the types of the alerts you want to be announced
Choose alerts reporting mode
Save custom changes
Remote control
after a remote control permission is granted, NVDA + O will move the focus in /Out of the remote controlled screen

Note that the focus should be on one of the meeting controls to be able to remote control the other screen

About
An add-on for NVDA screen reader to enhance the experience while using Zoom
https://github.com/mohammad-suliman/zoom-enhancements


Re: Looking for a *very specific* method of captioning

 

I don't even think you would be able to do this, in any meaningful way, if you're talking about NVDA in continuous speech mode reading sentences.  If I list were being read, where there was sufficient time to present and remove each word in caption, it could work.  It's not going to work at any speech rate that approximates natural speech.  You couldn't even consciously register individual words that would flash that briefly.  It would be like the experiments decades ago on subliminal suggestion.
--

Brian - Windows 10 Pro, 64-Bit, Version 2004, Build 19041  

A gentleman is one who never hurts anyone's feelings unintentionally.

          ~ Oscar Wilde

 


Looking for a *very specific* method of captioning

Jesse Farquharson
 

Hello folks.

So, I'm looking to start something, and what I want to do is have the speech NVDA outputs captioned. I want it to overlay a video, but rather than traditional captions (remaining on screen until whatever is being spoken is finished), I want each word to appear on screen, then disappear, one by one, as they're spoken. I'm assuming this is pretty far out. I'm assuming no one will be able to advise me on something this safisticated, but I thought I'd try asking anyway.

Any help would be appreciated.


Re: issues with quick nav of thunderbird and NVDA

David Goldfield
 

>Where do I find this add-on?


You can find the addon at the above link.


David Goldfield,
Blindness Assistive Technology Specialist
JAWS Certified, 2019

WWW.DavidGoldfield.org
On 9/1/2020 9:55 AM, Hettie wrote:

Where do I find this add-on? I tried the add-on page but couldn't find it.


Hettie.


On 2020/08/31 10:54 pm, David Goldfield wrote:

This interests me because I also notice similar behavior with version 3.0 of this addon. The addon appears to work as expected until I restart TB. Upon restarting TB the addon is still enabled but the addon itself acts as if it has been disabled. First letter navigation does not move to the relevant folder and the addon's option does not appear in the context menu. If I go into addon settings and disable the addon and then enable it the addon works properly once again until I close and restart TB. I wrote to the addon author who was unable to reproduce the issue. I then asked about it on the Thunderbird support list and was given a suggestion which didn't work for me. I have reinstalled TB as well as removed and then reinstalled the addon.


David Goldfield,
Assistive Technology Specialist

JAWS Certified, 2019

www.davidgoldfield.org
On 8/31/2020 3:40 PM, Dan Beaver wrote:

Yeah, but with the newest version there are still issues.  I have to go in and disable and then

re-enable the extension every time I bring up Thunderbird.


I wish someone could do something about it because it is getting irritating. ;)


Dan Beaver

On 8/31/2020 2:41 PM, Brian Vogel wrote:
Bob,

          I would uninstall and reinstall Quick Folder Navigation if the version you have went in a long while ago.  There have been some recent updates related to compatibility with the more recent versions of Thunderbird.

--

Brian - Windows 10 Pro, 64-Bit, Version 2004, Build 19041  

A gentleman is one who never hurts anyone's feelings unintentionally.

          ~ Oscar Wilde

 

-- 
Dan Beaver (KA4DAN)

Virus-free. www.avg.com


Re: issues with quick nav of thunderbird and NVDA

David Goldfield
 

What is odd is that this addon began working a bit more consistently when my installation of Thunderbird updated to V78.2.1. In fact, it was working so consistently that I thought that the issue was completely resolved, even though the release notes provided no obvious references to this type of problem. However, at some point the addon failed to work again. After going into Addon Options and looking at the addon's options it suddenly started working again even though I made no changes to any of the settings. I am at a loss to explain this and, as I wrote in a previous message in this thread, the developer of this addon cannot reproduce this issue.



David Goldfield,
Blindness Assistive Technology Specialist
JAWS Certified, 2019

WWW.DavidGoldfield.org
On 9/1/2020 12:03 PM, Hettie wrote:

No, I forgot that is a TB add-on. Thanks, you saved my sanity!


Hettie

On 2020/09/01 4:20 pm, Dan Beaver wrote:

Did you search for it under add-on manager in Thunderbird?  It isn't an NVDA add-on.


Dan Beaver

On 9/1/2020 9:55 AM, Hettie wrote:

Where do I find this add-on? I tried the add-on page but couldn't find it.


Hettie.


On 2020/08/31 10:54 pm, David Goldfield wrote:

This interests me because I also notice similar behavior with version 3.0 of this addon. The addon appears to work as expected until I restart TB. Upon restarting TB the addon is still enabled but the addon itself acts as if it has been disabled. First letter navigation does not move to the relevant folder and the addon's option does not appear in the context menu. If I go into addon settings and disable the addon and then enable it the addon works properly once again until I close and restart TB. I wrote to the addon author who was unable to reproduce the issue. I then asked about it on the Thunderbird support list and was given a suggestion which didn't work for me. I have reinstalled TB as well as removed and then reinstalled the addon.


David Goldfield,
Assistive Technology Specialist

JAWS Certified, 2019

www.davidgoldfield.org
On 8/31/2020 3:40 PM, Dan Beaver wrote:

Yeah, but with the newest version there are still issues.  I have to go in and disable and then

re-enable the extension every time I bring up Thunderbird.


I wish someone could do something about it because it is getting irritating. ;)


Dan Beaver

On 8/31/2020 2:41 PM, Brian Vogel wrote:
Bob,

          I would uninstall and reinstall Quick Folder Navigation if the version you have went in a long while ago.  There have been some recent updates related to compatibility with the more recent versions of Thunderbird.

--

Brian - Windows 10 Pro, 64-Bit, Version 2004, Build 19041  

A gentleman is one who never hurts anyone's feelings unintentionally.

          ~ Oscar Wilde

 

-- 
Dan Beaver (KA4DAN)

Virus-free. www.avg.com
-- 
Dan Beaver (KA4DAN)


NVDA mouse tracking problem

 

Checkbox, radio button, and buttons on the web page are not sporting with the rabbit 

i using NVDA20.2
and 
win10 pro 2004
help me to all 


Re: Extra verbosity in Thunderbird

Robert Logue
 

Yes Gene. I did try turning report dynamic content changes off but it did not help.


Bob

On 2020-09-01 11:41 a.m., Gene wrote:
The only thing I can think of that might possibly work is to turn report dynamic content changes off, though I'm just about sure it won't help to turn it off.  But you can try.  The toggle is NVDA key 5 on the main keyboard.

Of course, you could downgrade to a version of the program that doesn't have the problem.  You could get the portable version so you could leave your current installation undisturbed and update it to see if the problem is solved while continuing to use the portable version.  I suspect that this may be an Aria live region but I am not aware that NVDA has a setting to turn reading of live regions off.  It should.

Gene
-----Original Message----- From: Robert Logue
Sent: Tuesday, September 01, 2020 11:11 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Extra verbosity in Thunderbird

I tried turning off everything I could find that might stop the extra
speech in both Thunderbird and NVDA settings.  I unchecked just about
everything I thought was relevant including status bar.


I tried using screen review mode to find the notification style text
being spoken. No luck there.


What other tools does NVDA have to control this kind of verbosity in
programs?


Bob



On 2020-08-31 1:07 p.m., Hope Williamson wrote:
Yeah I have the same issue. It's pretty annoying. Especially when it
keeps saying downloading however many messages. I tried turning off the
status bar thing, and it still does it.





6401 - 6420 of 83227