1. nvda@nvda.groups.io
  2. Messages
   Date   
Re: Nvda And SPL!

Joseph Lee
 

Hi,

With Studio window focused, open input gestures dialog (NVDA menu/Preferences/Input gestures), scroll to StationPlaylist category, expand it and look for SPL Assistant, then add a memorable gesture that does not conflict with other NVDA commands.

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Afik Souffir
Sent: Friday, September 25, 2020 10:28 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

How do you assign a keystroke for open it?

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 8:19 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

Hi,

That’ll be SPL Assistant layer, D (you must assign a hotkey to open SPL Assistant layer first).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Afik Souffir
Sent: Friday, September 25, 2020 10:16 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

 

I'm asking the same question

 

How do you know the time in a playlist?

 

 

Afik

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 7:29 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

Hi,

Yes, it is like starting from scratch with JAWS. There is a way to “label” encoders using NVDA through an add-on for StationPlaylist (expect a release announcement next week).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Thomas E Williamson, Senior
Sent: Friday, September 25, 2020 4:45 AM
To: nvda@nvda.groups.io
Subject: [nvda] Nvda And SPL!

 

Hello,

I am wanting to use nvda with station playlist 5.40.

Will this be like starting over again in turns of the key strokes from Jaws?

For example, when I open studio, my encoders do not display the names of the radio stations that I previously named.

or is there a tutorial that can assist in this matter?

Hope this make since.

Thanks for your help in advance!

Regards,

Thomas.

 

 

 
Re: Nvda And SPL!

Afik Souffir <afik.souffir@...>
 

How do you assign a keystroke for open it?

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 8:19 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

Hi,

That’ll be SPL Assistant layer, D (you must assign a hotkey to open SPL Assistant layer first).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Afik Souffir
Sent: Friday, September 25, 2020 10:16 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

 

I'm asking the same question

 

How do you know the time in a playlist?

 

 

Afik

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 7:29 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

Hi,

Yes, it is like starting from scratch with JAWS. There is a way to “label” encoders using NVDA through an add-on for StationPlaylist (expect a release announcement next week).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Thomas E Williamson, Senior
Sent: Friday, September 25, 2020 4:45 AM
To: nvda@nvda.groups.io
Subject: [nvda] Nvda And SPL!

 

Hello,

I am wanting to use nvda with station playlist 5.40.

Will this be like starting over again in turns of the key strokes from Jaws?

For example, when I open studio, my encoders do not display the names of the radio stations that I previously named.

or is there a tutorial that can assist in this matter?

Hope this make since.

Thanks for your help in advance!

Regards,

Thomas.

 

 

 
Re: Nvda And SPL!

Joseph Lee
 

Hi,

That’ll be SPL Assistant layer, D (you must assign a hotkey to open SPL Assistant layer first).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Afik Souffir
Sent: Friday, September 25, 2020 10:16 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

 

I'm asking the same question

 

How do you know the time in a playlist?

 

 

Afik

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 7:29 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

Hi,

Yes, it is like starting from scratch with JAWS. There is a way to “label” encoders using NVDA through an add-on for StationPlaylist (expect a release announcement next week).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Thomas E Williamson, Senior
Sent: Friday, September 25, 2020 4:45 AM
To: nvda@nvda.groups.io
Subject: [nvda] Nvda And SPL!

 

Hello,

I am wanting to use nvda with station playlist 5.40.

Will this be like starting over again in turns of the key strokes from Jaws?

For example, when I open studio, my encoders do not display the names of the radio stations that I previously named.

or is there a tutorial that can assist in this matter?

Hope this make since.

Thanks for your help in advance!

Regards,

Thomas.

 

 

 
Re: Nvda And SPL!

Afik Souffir <afik.souffir@...>
 

 

I'm asking the same question

 

How do you know the time in a playlist?

 

 

Afik

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Friday, September 25, 2020 7:29 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda And SPL!

 

Hi,

Yes, it is like starting from scratch with JAWS. There is a way to “label” encoders using NVDA through an add-on for StationPlaylist (expect a release announcement next week).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Thomas E Williamson, Senior
Sent: Friday, September 25, 2020 4:45 AM
To: nvda@nvda.groups.io
Subject: [nvda] Nvda And SPL!

 

Hello,

I am wanting to use nvda with station playlist 5.40.

Will this be like starting over again in turns of the key strokes from Jaws?

For example, when I open studio, my encoders do not display the names of the radio stations that I previously named.

or is there a tutorial that can assist in this matter?

Hope this make since.

Thanks for your help in advance!

Regards,

Thomas.

 

 

 
Re: accessible disk imaging software.

Akash Kakkar
 

Object nav etc

On 9/25/2020 5:31 PM, Austin Pinto wrote:
what are the work arounds for magrum reflect?

On 9/25/20, Akash Kakkar <akash.diverse@gmail.com> wrote:
DriveSnapshot also doesn't have any incremental backup support.

I use it on regular basis

On 9/25/2020 2:39 PM, Stephen wrote:
Have you tried drive snapshot or image for windows?
They are extremely accessible.
I think drivesnapshot does full and differencial backup and image for
windows does full, differencial and increments.

----- Original Message -----
From: Austin Pinto <austinpinto.xaviers@gmail.com>
Reply-To: <nvda@nvda.groups.io>
To: <access-uk@freelists.org>
Sent: 9/25/2020 2:51:10 PM
Subject: [nvda] accessible disk imaging software.
________________________________________________________________________________

hi all.
i require an accessible disk imaging software that can backup and
restore windows 10 and data and also has incrimental and differencial
backup features.
i used to use active@disk image but it doesnt restore windows 10
properly.
please suggest
Re: Nvda And SPL!

Joseph Lee
 

Hi,

Yes, it is like starting from scratch with JAWS. There is a way to “label” encoders using NVDA through an add-on for StationPlaylist (expect a release announcement next week).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Thomas E Williamson, Senior
Sent: Friday, September 25, 2020 4:45 AM
To: nvda@nvda.groups.io
Subject: [nvda] Nvda And SPL!

 

Hello,

I am wanting to use nvda with station playlist 5.40.

Will this be like starting over again in turns of the key strokes from Jaws?

For example, when I open studio, my encoders do not display the names of the radio stations that I previously named.

or is there a tutorial that can assist in this matter?

Hope this make since.

Thanks for your help in advance!

Regards,

Thomas.

 

 

 
Re: Change Ringing: Practice and Theory

Brian Vogel
 

Damien,

          I can't help you out specifically, but I wanted to note that I've updated the topic to be fully descriptive, as Change Ringing is definitely "a thing of its own" and those who are into it will recognize it better.

          Since you're asking about what software related to change ringing is accessible with NVDA, that's entirely on-topic for the main group.  If the time comes where something is recommended and you want to discuss how to use that software, that topic should be started on the Chat Subgroup.
--

Brian - Windows 10 Pro, 64-Bit, Version 2004, Build 19041  

It’s hard waking up and realizing it’s not always black and white.

 

     ~ Kelley Boorn

 
Change Ringing: Practice and Theory

Damien Garwood <damien@...>
 

Hi all,
I know this is a rather specialised topic, but I'll ask anyway on the off chance.
1. Are there any change-ringers here who could advise me of the best ringing software that works with NVDA?
I'm looking for something that will enable me to learn new methods, so it can be either:
A. An app that plays a method, or prints the numbers out in CSV form
B. An app that requires you to ring a method, or follow calls, perhaps simulating a band and a conductor, and scores you on it.
2. I'm very interested into how change ringing compositions are made (being a musical composer myself). Apparently computers can generate them now, because it's very mathematical. I'd like to learn more about this, but whatever math (or maths, if you prefer) based articles I try and read, they're either covered with graphics, or a mysterious area of three or more spaces that mean absolutely nothing.
Someone suggested that Mathplayer was the way forward, but while that does interact with some of these areas, it didn't work with all of them, and the number of problems I had both understanding how to make sense of the information it provided when it did work, and then eventually uninstalling it, I'm a little cautious to start using it again.
Cheers.
Damien.
Re: Gmail Filter Setup - Specifically, for the NVDA Group Messages

Brian Vogel
 

On Fri, Sep 25, 2020 at 12:07 PM, Cristóbal wrote:
When I create a filter, I check the skip the inbox option so that the messages are sent directly to that folder/label.
-
As do I.  If I'm sending something to a specific label/folder I have no desire to have what is, for all practical intents and purposes, a second copy still resident in my Inbox.

I can envision some allowing it to "land in both" with the dedicated folder being their personal archive, but you still then have the issue of if you delete something from the inbox it's gone from all other labels it gets assigned.  The only way to nuke from the inbox and keep elsewhere is to delete the inbox label itself, leaving all others intact.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 2004, Build 19041  

It’s hard waking up and realizing it’s not always black and white.

 

     ~ Kelley Boorn

 
Re: Gmail Filter Setup - Specifically, for the NVDA Group Messages

Cristóbal
 

When I create a filter, I check the skip the inbox option so that the messages are sent directly to that folder/label. All my mailing list emails are sent to a mailing list folder for example.

 

Cristóbal

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian Vogel
Sent: Wednesday, September 23, 2020 11:56 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Gmail Filter Setup - Specifically, for the NVDA Group Messages

 

Chris,

          Yes, that is "what they are," and Gmail uses a very peculiar mechanism of their own design for this, but somewhere beneath he fact that a message can have multiple labels applied, and show up in multiple folders as a result, you are correct that there is only one copy.  

           I haven't played with creating a message with multiple labels and then deleting it under only one of them to see if it remains in the others, which would suggest that there are multiple folders, most of which use symbolic links to access the actual message wherever it is.

            I've never had any need to assign multiple labels to a given message, and find it annoying when I do assign a specific one that the "inbox" label is not removed by default.  You have to do that in the filter.

--

Brian - Windows 10 Pro, 64-Bit, Version 2004, Build 19041  

A gentleman is one who never hurts anyone's feelings unintentionally.

          ~ Oscar Wilde

 
Re: accessible disk imaging software.

Michel Such
 

Hi,

 

I can confirm Image For Windows works fine with NVDA and is fully accessible.

 

Michel Such
Expert NVDA certifié 2019
Re: NVDA Speech delay after Computer is Idle

Chris
 

Sounds like a power management issue

Possibly because  your hard drive is going to sleep, the delay may well be because you are using a mechanical HDD drive ,

 

Rather than a solid state SSD drive

 

You can prevent your hard drive going to sleep through your advanced power plan settings

 

 

 

From: Betsy Grenevitch
Sent: 25 September 2020 14:39
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA Speech delay after Computer is Idle

 

If it is the computer going to sleep how do you wake it up? Is there a setting that may have gotten changed with the latest Windows update. I did not have this problem until then.
Re: Changing Language Back To english!

Tony Ballou
 

Hi Thomas,

 

No problem, glad to help you out.

 

Tony
NV-music-viewer addon

Josh Kennedy <joshknnd1982@...>
 

Also I forgot to mention if such an addon is created, let us have a toggle option so as you navigate through the music-xml file you can turn midi music on or off to hear it as you navigate through the music-xml with arrow keys using midi playback.

 

 

 

Sent from Mail for Windows 10

 
NV-music-viewer addon

Josh Kennedy <joshknnd1982@...>
 

Hi,

 

Since NVMath viewer exists, could someone please make an NVDA addon that will let you open a music-XML file and show it as printed music in the browse mode buffer? Therefore a sighted person could see it, you could navigate through it with conventional arrow and navigation keys and NVDA would read you the notes, measures, chords, and other musical characteristics, and if a braille display is connected, you would see braille music notation on your braille display.

 

Thanks,

 

Josh

 

 

Sent from Mail for Windows 10

 
NVMathViewer addon question

Josh Kennedy <joshknnd1982@...>
 

Hi,

When I use the nvMathViewer addon, could a sighted person see what is in the math viewer browse mode as printed math? Or is this only visible to the screen reader and braille display if one is connected?

 

Josh

 

 

Sent from Mail for Windows 10

 
Re: book extensively dealing with NVDA or JAWS and the internet

Tony Ballou
 

Hi,

 

Look this one up from Carroll press.  It’s called When One Web browser is not enough. It’s a guide for using the internet with jaws and NVDA. 

Hope this helps.

 

Tony

 

Sent from Mail for Windows 10

 

From: Aschalew Byness
Sent: Friday, September 25, 2020 3:18 AM
To: nvda
Subject: [nvda] book extensively dealing with NVDA or JAWS and the internet

 

Hi Friends?
I want to purchase a book if there is a one extensively discussing
NVDA and JAWS with the internet. May you suggest me please?




 
Re: NVDA Speech delay after Computer is Idle

Betsy Grenevitch
 

If it is the computer going to sleep how do you wake it up? Is there a setting that may have gotten changed with the latest Windows update. I did not have this problem until then.


On 9/24/2020 12:15 PM, Brian Vogel wrote:
Has the computer gone to sleep?  You make no mention of that, but if it has been put into sleep mode due to inactivity it does take a few moments for everything to "come back to life" again.  Some things will come back to life before others do.
--

Brian - Windows 10 Pro, 64-Bit, Version 2004, Build 19041  

It’s hard waking up and realizing it’s not always black and white.

 

     ~ Kelley Boorn

 

-- 
Betsy Grenevitch
678-862-3876
Re: NVDA Speech delay after Computer is Idle

Betsy Grenevitch
 

This problem with NVDA began after my latest windows update. Sometimes it will happen even when I am in the middle of doing something like saving a document.


I read Jonathan's article but it is above my understanding of how to handle the situation.

On 9/24/2020 10:45 AM, Gene wrote:
I don't know why that is.  that appears to indicate a different problem than the one I pointed to.

Gene
-----Original Message----- From: Mária Orovčíková
Sent: Thursday, September 24, 2020 8:13 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA does not work properly

Hello again,
the thing is that it also happens when a sound is playing (for example
video or audio), it takes some time til NVDA starts working again after
not being active.
Maria

On 24. 9. 2020 14:28, Gene wrote:
If a computer has this problem, while this is unusual, in generel the problem occurs when the computer isn't used for a much shorter time, this page mauy have the solution.
https://mosen.org/soundsfrustrating/

You may want to read the article or skip to the part that discusses the specific solution I have in mind.  To find the beginning of that specific section, search for
Thanks so much to

Gene
-----Original Message----- From: Mária Orovčíková
Sent: Thursday, September 24, 2020 7:00 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA does not work properly

Hello list,
I have some weird issue with NVDA.
When I do not use my laptop for a longer period of time (half an hour
and longer), but the laptop is stil on, and when I want to use it again,
I pres any key, NVdA takes quite a long time to start speaking.
I have Lenovo, Windows 10, latest NVDA version and I have screensavers,
and standby mode disabled.
Please, if anyone knows any workaround, let me know.
Thank you very much for your help.
Maria















--
Betsy Grenevitch
678-862-3876
Re: accessible disk imaging software.

Richard Kuzma
 

Good morning,
I use image for windows and it is completely accessible.
I use it with jaws but nvda should work as well.
It is very inexpensive and has a thirty day trial.
I have successfully backed up my pc for about four years now and even used it to backup and restore to a new hard drive with no trouble.
Hope this helps,
Rich

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Austin Pinto
Sent: Friday, September 25, 2020 12:51 AM
To: access-uk@freelists.org
Subject: [nvda] accessible disk imaging software.

hi all.
i require an accessible disk imaging software that can backup and restore windows 10 and data and also has incrimental and differencial backup features.
i used to use active@disk image but it doesnt restore windows 10 properly.
please suggest
18181 - 18200 of 95653