Date   

Re: NVDA goes silent when arrowing down the list of participants panel in Zoom

hurrikennyandopo ...
 

Hi


The link to the add on is found at https://addons.nvda-project.org/addons/zoomEnhancements.en.html <https://addons.nvda-project.org/addons/zoomEnhancements.en.html>

I am guessing if they have done a add on for it hopefully some of those problems will go away.


Gene nz

On 10/12/2020 7:30 am, Bob Cavanaugh wrote:
No, I do not have the Zoom add-on. I could install that and try again
before my next meeting.

On 12/8/20, hurrikennyandopo ... <hurrikennyandopo@hotmail.com> wrote:
Hi


Is that with the zoom add on you still get that result or is it without it?


Gene nz


On 9/12/2020 4:26 pm, Bob Cavanaugh wrote:
I am in a Zoom meeting right now, and can confirm that NVDA does not
speak when arrowing down after six participants. Interestingly, if you
go to the bottom of the list and use your up arrow, the same thing
happens. I waited several seconds before pressing the arrow key again,
and NVDA never spoke.

On 12/2/20, Gene <gsasner@gmail.com> wrote:
When testing a problem like this, it may be helpful to test for such
things.

Assuming that something is or isn't happening may lead to an incorrect
description of a problem.

Gene
-----Original Message-----
From: Bob Cavanaugh
Sent: Wednesday, December 02, 2020 11:56 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA goes silent when arrowing down the list of
participants panel in Zoom

Nor have I done much testing with this, as I'm usually trying to focus
on the meeting I'm attending, but I do not expect my screen reader, no
matter what it is, to suddenly be delayed by several seconds after
arrowing down a half a dozen times with no problem whatsoever. I may
have a meeting on Saturday, so I will play around with this if that
meeting happens.

On 12/2/20, Gene <gsasner@gmail.com> wrote:
How long do you wait before deciding that nothing will be read? The
meetings I attend generally don't have a lot of attendees. Generally
something like eight or ten. If I down arrow a lot of times, speech is
delayed, I didn't play with this much because I wanted to hear what was
going on in the meeting, but it seemed to me that in perhaps ten
seconds,

I

would hear something.

It might help those analyzing the problem if they knew if speech stops
or

is

very delayed. I didn't do enough testing to know on my machine. I may
when

I attend another meeting.

Gene
-----Original Message-----
From: Sim Kah Yong
Sent: Wednesday, December 02, 2020 8:36 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA goes silent when arrowing down the list of
participants panel in Zoom

Hi

I tried the read current line or the read the current line of the
navigation object and NVDA reads to me when I encounter the problem.
This is just a work-around, how nice if a solution can be found for
this. Thanks.

On 11/30/2020 11:07 AM, Gene wrote:
What happens if you down arrow and when speech stops, read the current
line. You can also try reading the current line of the navigator
object,
in the desktop layout, numpad 8. I don't know the laptop layout. You
may

not hear anything but if this combination allows you to hear the names
as

you move, that may be a work around that is reasonable for now.

Gene
-----Original Message----- From: Sky Mundell
Sent: Sunday, November 29, 2020 8:20 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA goes silent when arrowing down the list of
participants panel in Zoom

Hello Bob. Just curious, does SA have that problem? System Access I
mean?

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Bob
Cavanaugh
Sent: Sunday, November 29, 2020 6:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA goes silent when arrowing down the list of
participants panel in Zoom

I have this issue too. What I've found to work is to hit your up arrow
when you get to the point where it goes silent, then your down arrow
again. That helps for a brief time, then you have to repeat that
process
again. I agree, kind of annoying. I'm also having two additional
issues
with NVDA not reading things properly in Zoom:
1. When typing anything in Zoom and you type something wrong, NVDA
does
not read what you backspace. It reads if you type things normally, but
if

you try to review or correct an error, it will not read.
2. If you're in a meeting that initially isn't being recorded, then
the
host starts recording, NVDA does not read the alert that tells you
that
the meeting is now being recorded.

On 11/29/20, Sim Kah Yong <simkahyong@gmail.com> wrote:
Hi all,

Wish to report the above problem when using NVDA in Zoom. IN a zoom
meeting, if I wish to find out the list of participants, I will press
alt + U to call out the participants panel. I will then arrow down
the
list. After severl down arrow, NVDA will stop speaking.

I am using the latest version of NVDA, Zoom enhancement app and Zoom.
This problem has been there even with the older version of NVDA and
Zoom. I am using Windows 8.1. I have tried the following with no
avail:

1. Wit no apps

2. restart NVDA

3. Re-boot my computer.

Just wish to find out if any of you have similar problem and what can
be done? Perhaps this can help to improve future version of NVDA.

I have also use JAWS and this has not been a problem. Thanks all.


































Re: Spellcheck: How do I read the misspelled word in context?

benmoxey@...
 

Hi Ann

Try these two methods and see which works for you.

1. When you find a word in the spell check pain and you need to know the
context, use Shift + F6 to cycle back to the document pain. You should find
yourself on the line where the error has been detected. Move your cursor to
the error and use the Applications key (or Shift + F10) to choose from a
list of suggestions or you can correct manually. Press F6 to cycle forward
to the spell check pain and continue as normal. Note that you typically need
to hit "Resume" to find the next error.

2. From the top of the document, activate Browse mode by using the toggle
NVDA + Space. Then, simply press W to move to the next misspelled word or
Shift + W to move to the previous. Hit the Applications key to view a list
of corrections. Note that you must toggle back to Focus mode if you want to
correct manually with NVDA + Space, and return to Browse mode to continue
the process. Further, this method will only find misspelled words and will
not identify grammatical errors.

Hope this helps!

All the best.

Ben

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Ann Byrne
Sent: Wednesday, 9 December 2020 9:17 AM
To: nvda@nvda.groups.io
Subject: [nvda] Spellcheck: Howe do I read the mispelled word in context

when checking a document for spelling, how do I get NVDA to read the
sentence the word belongs to? Advanced versions of Word do offer their own
solution, but in 2013 there is no external voicing of the sentence.


Re: NVDA goes silent when arrowing down the list of participants panel in Zoom

Bob Cavanaugh <cavbob1993@...>
 

No, I do not have the Zoom add-on. I could install that and try again
before my next meeting.

On 12/8/20, hurrikennyandopo ... <hurrikennyandopo@hotmail.com> wrote:
Hi


Is that with the zoom add on you still get that result or is it without it?


Gene nz


On 9/12/2020 4:26 pm, Bob Cavanaugh wrote:
I am in a Zoom meeting right now, and can confirm that NVDA does not
speak when arrowing down after six participants. Interestingly, if you
go to the bottom of the list and use your up arrow, the same thing
happens. I waited several seconds before pressing the arrow key again,
and NVDA never spoke.

On 12/2/20, Gene <gsasner@gmail.com> wrote:
When testing a problem like this, it may be helpful to test for such
things.

Assuming that something is or isn't happening may lead to an incorrect
description of a problem.

Gene
-----Original Message-----
From: Bob Cavanaugh
Sent: Wednesday, December 02, 2020 11:56 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA goes silent when arrowing down the list of
participants panel in Zoom

Nor have I done much testing with this, as I'm usually trying to focus
on the meeting I'm attending, but I do not expect my screen reader, no
matter what it is, to suddenly be delayed by several seconds after
arrowing down a half a dozen times with no problem whatsoever. I may
have a meeting on Saturday, so I will play around with this if that
meeting happens.

On 12/2/20, Gene <gsasner@gmail.com> wrote:
How long do you wait before deciding that nothing will be read? The
meetings I attend generally don't have a lot of attendees. Generally
something like eight or ten. If I down arrow a lot of times, speech is
delayed, I didn't play with this much because I wanted to hear what was
going on in the meeting, but it seemed to me that in perhaps ten
seconds,

I

would hear something.

It might help those analyzing the problem if they knew if speech stops
or

is

very delayed. I didn't do enough testing to know on my machine. I may
when

I attend another meeting.

Gene
-----Original Message-----
From: Sim Kah Yong
Sent: Wednesday, December 02, 2020 8:36 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA goes silent when arrowing down the list of
participants panel in Zoom

Hi

I tried the read current line or the read the current line of the
navigation object and NVDA reads to me when I encounter the problem.
This is just a work-around, how nice if a solution can be found for
this. Thanks.

On 11/30/2020 11:07 AM, Gene wrote:
What happens if you down arrow and when speech stops, read the current
line. You can also try reading the current line of the navigator
object,
in the desktop layout, numpad 8. I don't know the laptop layout. You
may

not hear anything but if this combination allows you to hear the names
as

you move, that may be a work around that is reasonable for now.

Gene
-----Original Message----- From: Sky Mundell
Sent: Sunday, November 29, 2020 8:20 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA goes silent when arrowing down the list of
participants panel in Zoom

Hello Bob. Just curious, does SA have that problem? System Access I
mean?

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Bob
Cavanaugh
Sent: Sunday, November 29, 2020 6:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA goes silent when arrowing down the list of
participants panel in Zoom

I have this issue too. What I've found to work is to hit your up arrow
when you get to the point where it goes silent, then your down arrow
again. That helps for a brief time, then you have to repeat that
process
again. I agree, kind of annoying. I'm also having two additional
issues
with NVDA not reading things properly in Zoom:
1. When typing anything in Zoom and you type something wrong, NVDA
does
not read what you backspace. It reads if you type things normally, but
if

you try to review or correct an error, it will not read.
2. If you're in a meeting that initially isn't being recorded, then
the
host starts recording, NVDA does not read the alert that tells you
that
the meeting is now being recorded.

On 11/29/20, Sim Kah Yong <simkahyong@gmail.com> wrote:
Hi all,

Wish to report the above problem when using NVDA in Zoom. IN a zoom
meeting, if I wish to find out the list of participants, I will press
alt + U to call out the participants panel. I will then arrow down
the
list. After severl down arrow, NVDA will stop speaking.

I am using the latest version of NVDA, Zoom enhancement app and Zoom.
This problem has been there even with the older version of NVDA and
Zoom. I am using Windows 8.1. I have tried the following with no
avail:

1. Wit no apps

2. restart NVDA

3. Re-boot my computer.

Just wish to find out if any of you have similar problem and what can
be done? Perhaps this can help to improve future version of NVDA.

I have also use JAWS and this has not been a problem. Thanks all.






































Odd arrow keys and speak current character behavior with MinTTY under Windows Subsystem for Linux

Dan Miner
 

Just wanted to check to see if I am doing something wrong but I am having troubles editing shell commands with minty in any environment that uses it so far (Git for Windows, msys2 and WSLTTY).

 

I just installed the latest versions of Git for Windows, msys2 and WSLTTY in the last week And ran across a “consistent” problem.  I am using bash in its default configuration from these packages (Ubuntu 20.04.1 for WSL2).

 

 

The initial set up to reproduce problem (keeping it simple):

 

Type: echo hi

 

Without hitting return and intending to edit that line, changing hi (all lowercase) to Hi (with a capital H).

 

Press left arrow and “space” is spoken” and if you continue hitting the left or right arrows, you will always get “space” said.  So, it is easy to get lost as none of the under lying characters are spoken.  Thus, I hit the speak current character (Keypad 2) and I get an inconsistent spoken output of “space” or the character under the cursor.  Typical instances it will alternate between the two states and one time I got repeating twice.  To clarify, it would say “space”, “space” “h”, “h”, and cycle back to “space”.  But in this simple example and movement, it will likely just alternate back and forth between “space” and the letter (“I” in this case).

 

A partial workaround I have found is using bash’s readline advanced editing keys.  If I use control+left arrow and move by word, NVDA will speak the words as expected.  However, I still have to deal with arrow key problem and speak character issues within the word of interest.

 

Is anyone seeing this behavior?  It has been going on for many versions of NVDA (easily a year).

 

As sanity check, the standard cmd console behaves as expected with these features.

 

    Dan


Re: NVDA and Data Harvest Q Advanced Data Logger by Easy Sense

 

Topic title updated for archival and clarity purposes.

--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

If you think that you can think about a thing, inextricably attached to something else, without thinking of the thing it is attached to, then you have a legal mind.

        ~ Thomas Reed Powell

 


NVDA and Data Harvest Q Advanced Data Logger by Easy Sense

Jo Collingwood
 

Has anyone used a Data harvest Q advanced data logger by Easy sense with NVDA? Are they compatible together?We’ve downloaded the software and NVDA reads the tool bar but then just says Button when trying to read the data.


Re: How do I copy tables from a webpage while preserving their formatting

 

Depending on the browser you're using, there are also extensions/add-ons to make table selection, or part of table selection, easier.  Many of them have keyboard shortcuts associated with their actions.

Also be aware that preservation of formatting between an HTML table on a webpage an when it's pasted in to a Word document is not 100% flawless.  I just did a sighted selection of one of the tables on the page you referenced earlier, and when pasted in to word the 2nd and 3rd columns had their text placed at the bottom of the respective columns rather than the top, which is how they are presented on the webpage itself.
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

If you think that you can think about a thing, inextricably attached to something else, without thinking of the thing it is attached to, then you have a legal mind.

        ~ Thomas Reed Powell

 


Re: Listing links in Word

Ann Byrne
 

thanks. I thought there would be a trick.

At 09:23 AM 12/9/2020, you wrote:
You must first enter in browse mode with NVDA+space.


Rui Fontes


Às 15:15 de 09/12/2020, Ann Byrne escreveu:
When I press insert+f7 in Word, instead of a list of links I am placed in spell check. Does insert+f7 not list links in programs other than internet browsers? Am I missing a trick?

Thanks






Re: Listing links in Word

Rui Fontes
 

You must first enter in browse mode with NVDA+space.


Rui Fontes


Às 15:15 de 09/12/2020, Ann Byrne escreveu:

When I press insert+f7 in Word, instead of a list of links I am placed in spell check.  Does insert+f7 not list links in programs other than internet browsers?  Am I missing a trick?

Thanks





Re: Listing links in Word

Gene
 

I don't use Word but from what I've read and seen in discussions, try turning on browse mode with NVDA key space. The links list command should now work.

Gene

-----Original Message-----
From: Ann Byrne
Sent: Wednesday, December 09, 2020 9:15 AM
To: nvda@nvda.groups.io
Subject: [nvda] Listing links in Word

When I press insert+f7 in Word, instead of a list of links I am
placed in spell check. Does insert+f7 not list links in programs
other than internet browsers? Am I missing a trick?

Thanks


Listing links in Word

Ann Byrne
 

When I press insert+f7 in Word, instead of a list of links I am placed in spell check. Does insert+f7 not list links in programs other than internet browsers? Am I missing a trick?

Thanks


Re: Trying to build NVDA from source using the directions I found on GitHub and having problems with liblouis

matthew dyer <ilovecountrymusic483@...>
 

Hi,

 

Thanks.  I will give this another look.  I did not see clang in the list of packages to install, but in any rate, I have sent a subscripsion address to the devel list.

 

Matthew

 

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Wednesday, December 9, 2020 12:48 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Trying to build nvda fr9om source using the directons I found on github and having problems with libluies

 

Hi all,

Apart from directing folks there, the real issue (based on the SCons output) is incomplete build environment – to build liblouis.dll, you must install Clang and the path must be added by Clang installer (you must do this while installing Visual Studio 2019 Community or above).

Cheers,

Jsoeph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian Vogel
Sent: Tuesday, December 8, 2020 8:51 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Trying to build nvda fr9om source using the directons I found on github and having problems with libluies

 

Matthew,

          I suggest you try asking about this on the NVDA Screen Reader Development Group:

This list is provided for discussion about development for the NVDA (NonVisual Desktop Access) screen reading software. This includes questions and discussion about the code, user experience, design and documentation, both between regular developers and new or potential developers.

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

If you think that you can think about a thing, inextricably attached to something else, without thinking of the thing it is attached to, then you have a legal mind.

        ~ Thomas Reed Powell

 


Re: add-on for accessing the system tray

Chris Mullins
 

Hi Bob

The system tray in Windows 10 is accessible without an add-on.  Use the Windows+b command to move focus to it.  There are  2 parts to the system tray and when it gets focus, you land in the “User promoted notification area toolbar”.  This shows the icons you have chosen to display in the foreground and you use left/right arrow keys to cycle through the icons.  You will encounter an icon announced as “Notification Chevron button”, press spacebar to activate this, then press left arrow. This opens the second part of the system tray which is the “Overflow Notification area toolbar” and it contains the remainder of the system tray icons, I.e those you did not elect to show in the foreground.   Use the left arrow to move through these icons and you will eventually wrap around to the foreground icons again.

 

Earlier I said that you decide which icons appear in the foreground User promoted area and the background overflow area.  You set these in the Settings app (Windows+I) using the Personalisation category, Task bar sub-category, then use the link entitled “Select which icons appear on the Task bar”.  From the list, check the toggle button of items you want in the foreground, unchecked items will be made available in the background.

 

Cheers

Chris

 

.    From: Bob Cavanaugh
Sent: 08 December 2020 23:22
To: nvda@nvda.groups.io
Subject: [nvda] add-on for accessing the system tray

 

H

 


Re: How do I copy tables from a webpage while preserving their formatting

Pranav Lal
 

Alexandre,

 

See the following link.

https://github.com/nvaccess/nvda/issues/5354

 

Pranav


Re: How do I copy tables from a webpage while preserving their formatting

Pranav Lal
 

Dear Ann,

As others have reported, no go.

There is indeed an issue raised for it on github.
https://github.com/nvaccess/nvda/issues/5354

Pranav


Re: December 2020 localization updates: Add-on Updater, StationPlaylist, Windows 10 App Essentials #addonrelease

 

Hi all,

To clarify Windows 10 App Essentials support policy:

  • This add-on will support a feature update for at least a year. Typically support for a feature update ends around December/January or June/July. As such, the oldest feature update being supported (November 2019 Update) will not be supported by this add-on from February 2021 onwards (it was supported since August 2019).
  • This add-on supports current stable, immediate past, and development versions of NVDA i.e. NVDA 2020.2 and later. Come January, it will support 2020.3 and later with the impending finalization of 2020.4.

These policies are designed to stress the fact that Windows 10 uses continuous delivery model, and to request that folks use more recent NVDA releases when working with Windows 10. The other add-on to follow this policy is Add-on Updater, but for that one, it supports Windows versions supported by NVDA and only supports latest NVDA release as the add-on is destined to be included in the screen reader in the future.

Cheers,

Joseph

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee via groups.io
Sent: Tuesday, December 8, 2020 10:07 PM
To: nvda-addons@nvda-addons.groups.io
Subject: [nvda] December 2020 localization updates: Add-on Updater, StationPlaylist, Windows 10 App Essentials #AddonRelease

 

Hello all,

Three add-ons with localization updates are now available:

  • Add-on Updater: one of the largest releases, containing localization updates done throughout the year. I expect this will be the last version to support NVDA 2020.3, as the next version (21.02) will require upcoming NVDA 2020.4.
  • StationPlaylist: localization updates, fixes a no announcement bug when trying to announce library scan updates while using a braille display, user interface tweaks based on NVDA 2020.3 changes.
  • Windows 10 App Essentials: resolves an issue in Calculator 10.2009 or later where NVDA would not announce history entries. A related bug affecting announcement of memory values is being tested via dev channel and will be included in upcoming 21.01.

 

A few notes:

  • Add-on Updater: originally I planned to release 21.01 (January update) but decided to wait until NVDA 2020.4 stable version is released (so the earliest release could be February). The next stable version will include internal changes.
  • StationPlaylist: 20.12 is a stable channel release. If you are looking for 20.09.x release, the next version (January 2021) will indeed include an LTS release. Also, 20.12 is the last stable version to support Studio 5.20.
  • Windows 10 App Essentials: originally version 20.12 was supposed to be the last release to support Windows 10 Version 1909 (November 2019 Update), but due to compatibility considerations with NVDA 2020.3 and later, support will be extended until January 2021 (so 21.01 will be the final version compatible with November 2019 Update). Also, 21.01 will require NVDA 2020.3 or later (a bit earlier than usual when it comes to dropping support for immediate past release, but it will be done this way in consideration for Version 1909 users).

 

As always, you can check for these add-on updates via an add-on that’s also being updated today (no, I’m not a poet, but…).

Cheers,

Joseph


Re: Object Location Tones 20.12, final version of the add-on #addonrelease

 

Hi,

The add-on plays a tone to indicate where a control is located on screen. There are alternatives out there such as Audio Themes 3D (provided that it is updated).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of mike mcglashon
Sent: Tuesday, December 8, 2020 10:05 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Object Location Tones 20.12, final version of the add-on #addonRelease

 

What is object location tones?

Is it n v  d a addon?

And if so , what does it do?

 

 

Please advise as you like.

 

Mike M.

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Wednesday, December 9, 2020 12:52 AM
To: nvda-addons@nvda-addons.groups.io
Subject: [nvda] Object Location Tones 20.12, final version of the add-on #addonRelease

 

Hello everyone,

Object Location Tones 20.12 is now available. This release includes compatibility range updates and nothing else.

 

IMPORTANT: version 20.12 is the last version of Object Location Tones. Effective January 31, 2021, I will be stepping down from actively maintaining this add-on. Thank you for your support of Object Location Tones for the last few years, and I hope someone will make this add-on great in the future.

Cheers,

Joseph


December 2020 localization updates: Add-on Updater, StationPlaylist, Windows 10 App Essentials #addonrelease

 

Hello all,

Three add-ons with localization updates are now available:

  • Add-on Updater: one of the largest releases, containing localization updates done throughout the year. I expect this will be the last version to support NVDA 2020.3, as the next version (21.02) will require upcoming NVDA 2020.4.
  • StationPlaylist: localization updates, fixes a no announcement bug when trying to announce library scan updates while using a braille display, user interface tweaks based on NVDA 2020.3 changes.
  • Windows 10 App Essentials: resolves an issue in Calculator 10.2009 or later where NVDA would not announce history entries. A related bug affecting announcement of memory values is being tested via dev channel and will be included in upcoming 21.01.

 

A few notes:

  • Add-on Updater: originally I planned to release 21.01 (January update) but decided to wait until NVDA 2020.4 stable version is released (so the earliest release could be February). The next stable version will include internal changes.
  • StationPlaylist: 20.12 is a stable channel release. If you are looking for 20.09.x release, the next version (January 2021) will indeed include an LTS release. Also, 20.12 is the last stable version to support Studio 5.20.
  • Windows 10 App Essentials: originally version 20.12 was supposed to be the last release to support Windows 10 Version 1909 (November 2019 Update), but due to compatibility considerations with NVDA 2020.3 and later, support will be extended until January 2021 (so 21.01 will be the final version compatible with November 2019 Update). Also, 21.01 will require NVDA 2020.3 or later (a bit earlier than usual when it comes to dropping support for immediate past release, but it will be done this way in consideration for Version 1909 users).

 

As always, you can check for these add-on updates via an add-on that’s also being updated today (no, I’m not a poet, but…).

Cheers,

Joseph


Re: Object Location Tones 20.12, final version of the add-on #addonrelease

mike mcglashon
 

What is object location tones?

Is it n v  d a addon?

And if so , what does it do?

 

 

Please advise as you like.

 

Mike M.

 

Mike mcglashon

Email: Michael.mcglashon@...

Ph: 618 783 9331

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Wednesday, December 9, 2020 12:52 AM
To: nvda-addons@nvda-addons.groups.io
Subject: [nvda] Object Location Tones 20.12, final version of the add-on #addonRelease

 

Hello everyone,

Object Location Tones 20.12 is now available. This release includes compatibility range updates and nothing else.

 

IMPORTANT: version 20.12 is the last version of Object Location Tones. Effective January 31, 2021, I will be stepping down from actively maintaining this add-on. Thank you for your support of Object Location Tones for the last few years, and I hope someone will make this add-on great in the future.

Cheers,

Joseph


Object Location Tones 20.12, final version of the add-on #addonrelease

 

Hello everyone,

Object Location Tones 20.12 is now available. This release includes compatibility range updates and nothing else.

 

IMPORTANT: version 20.12 is the last version of Object Location Tones. Effective January 31, 2021, I will be stepping down from actively maintaining this add-on. Thank you for your support of Object Location Tones for the last few years, and I hope someone will make this add-on great in the future.

Cheers,

Joseph

8201 - 8220 of 87710