1. nvda@nvda.groups.io
   Date   
Re: muting

Quentin Christensen
 

Sorry, I mustn't play with my laptop much - my desktop keyboard has a bunch of extra buttons and I was thinking of those which when you press things like "Mail" it DOES read that before opening mail - to be honest I never use those keys, I only know mail so well because I keep hitting that inadvertently when aiming for escape - I actually hadn't tried adjusting the volume with such keys.

Part of the problem is that while there is a standard for what signal gets sent to the PC when you press a or SHIFT+A, or escape, there is no standard for multimedia keys and other functions like volume controls on keyboards and I think many are controlled via the keyboard driver.  I haven't actually looked into the code for such things, so I could be wrong, but I think the other problem is that the way many of these keyboards control things like volume works to change the volume (or mute the sound entirely) but doesn't trigger an even which a screenreader sees.

On Sat, Jan 16, 2021 at 3:35 PM Brian Vogel <britechguy@...> wrote:
On Sun, Jan 10, 2021 at 03:52 PM, Dan Beaver wrote:
While listening I heard him say to type S N D V O L and press enter.  But what I actually heard was tinvol not S N D V O L.  I am still frequently disgusted with how messy the pronunciation tables are for the different synths.
-
Well, it's never easy to decide how to "pronounce the unpronounceable."   Without getting too "linguist geeky" every language has what are called phonotactic constraints, which means certain sound combinations that are, and are not, allowed to occur in combination with each other.  In English, S N D, as those three letters alone, violates phonotactic constraints.  There's no English word where those three consonants, in succession, exist or can be pronounced.

And when any effort to try to pronounce this as anything other than a letter sequence is made, the result is, in one way or another, wrong.

You'll often hear people say "send vol," turning the opening into an English word that conforms to the phonotactic constraints of the language.  But they're not saying what's written on the page, but trying to come up with something that they can get out of their mouths.

Very often a number of entries in my default dictionary are acronyms that are unpronounceable under English phonotactic constraints as their single letters.  NVDA as N V D A being a perfect example.  Words, and particularly surnames where I grew up, that have their roots elsewhere in the world are hell for an English reader because you often have no idea how to pronounce them.  My favorite example, and a real one from my younger days, was the surname spelled D Z I A G W A.  I challenge any native English speaker to come even close to guessing how that one sounds.  It was pronounced as jungwa.  (that leading j is like the g in giraffe).

The poor synth folks really can't win, and I suspect this sort of things occurs in any language when something is spelled out in a way that language just doesn't allow.
 --

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

The depths of denial one can be pushed to by outside forces of disapproval can make you not even recognize yourself to yourself.

       ~ Brian Vogel

 



--
Quentin Christensen
Training and Support Manager
Re: Tony's add-ons: new and updated

Tony Malykh
 

Fixed in IndentNav v1.11.

--Tony

On 1/12/2021 10:23 AM, Bruno Aníbal Prieto González wrote:
Thanks!

2021-01-12 11:33 GMT-03:00, Tony Malykh <anton.malykh@gmail.com>:
Got it, will look into that issue with IndentNav.

On 1/11/2021 7:23 PM, Bruno Aníbal Prieto González wrote:
Hi Tony! Thank you very much for all these add-ons, especially
WordNav. I used that Tony enhancements add-on a lot in VS Code but it
had to be enabled and disabled, since in UIA NVDA it said selected and
unselected all the time.
Since you corrected that, I imagine you already know how to do it, you
could correct that same error for IndentNav? In Visual Studio has that
behavior, NVDA says selected and unselected every time I use it. It
also happens to me in Windows 10 Sticky Notes, which also uses UI
Automation.

Thank you very much in advance!

2021-01-11 9:32 GMT-03:00, Suhas Dharwad <twigsnap7@gmail.com>:
sentence nav, word nav, and symbols, does sound quite interesting.

Will give it a try.
thanks.

---Suhas
Sent from Thunderbird <https://www.thunderbird.net/>
—

“Things can turn out differently, Apollo.
That's the nice thing about being human.
We only have one life, but we can choose what kind of story it's
going to be.”

Rick Riordan <https://rickriordan.com/>
On 1/10/2021 3:43, Tony Malykh wrote:
Hello all,

This is Tony, author of many NVDA add-ons. During holidays I updated
many of my add-ons, and wrote two new add-ons, so I would like to
share them with you guys. This is a long email, so please feel free to
navigate by headings!

Please note that links on the official website have not been updated,
as it seems that nobody has access to that website anymore. Therefore,
please download directly from Github, download links included below.


New add-ons:


WordNav

It takes word navigation to the next level in NVDA. It standardizes
what exactly does word mean, e.g. does it include punctuation before
and after, moreover, it offers various definitions of word, some of
which might be useful for software developers, for example when they
are working with camelCaseIdentifiers. It redefines Control+Left/Right
keystrokes, as well as it adds optional Control+Windows+Left/Right
keystrokes. Configuration panel included!

·Github: https://github.com/mltony/nvda-word-nav/

·Download:
https://github.com/mltony/nvda-word-nav/releases/download/v1.2/wordNav-1.2.nvda-addon


Console toolkit

This is a collection of tools for heavy console users. Among its
features are:

·More realtime speaking of console output

·* Beep on update

·Control+V shortcut now works in ssh connections

·Editing of current prompt in accessible window

·Capturing command output, including multi-page, and displaying it in
an accessible window

Please note, it supports the default Windows console, a.k.a. command
prompt, as well as windows PowerShell.

·Github: https://github.com/mltony/nvda-console-toolkit/

·Download:
https://github.com/mltony/nvda-console-toolkit/releases/download/v0.2dev/consoleToolkit-0.2dev.nvda-addon


Updates


SentenceNav

This add-on allows to read text sentence by sentence using Alt+Up/Down
keystroke. I managed to improve its performance a lot, now it reads
sentences much faster, especially in large paragraphs. I also added
experimental support for Microsoft Word and WordPad – before this
version built-in NVDA logic applied to sentence navigation in these
programs, and many users have complained about that. Also, a number of
bugfixes. Also I wrote extensive documentation, since sentence finding
code has become so complicated, even I myself is having a hard time
reading my own code after a couple of years since first release 😊

·Github: https://github.com/mltony/nvda-sentence-nav/

·Download:
https://github.com/mltony/nvda-sentence-nav/releases/download/v2.9/SentenceNav-2.9.nvda-addon

<https://github.com/mltony/nvda-sentence-nav/releases/download/v2.9/SentenceNav-2.9.nvda-addon>


BrowserNav

BrowserNav contains a set of improvements to browse mode in NVDA.
Besides a number of bugfixes, this new version includes command to
jump to next text written in different style (bound to tilde, that
weird key right above Tab), and a command to scroll down to reveal all
the hidden content, bound to backslash. That last command might be
useful for websites, that load content dynamically. This includes
Youtube, that doesn’t load the entire page and expects users to scroll
down to reveal certain elements, and also so called infinite scroll
webpages, such as Amazon and Facebook.

·Github: https://github.com/mltony/nvda-browser-nav/

·Download:
https://github.com/mltony/nvda-browser-nav/releases/download/v1.12/browsernav-1.12.nvda-addon

<https://github.com/mltony/nvda-browser-nav/releases/download/v1.12/browsernav-1.12.nvda-addon>


Tony’s enhancements

This add-on is an incubator for my experimental ideas, yet I believe
many of them might be quite handy for many users. In particular, this
time WordNav and Console toolkit mentioned above have graduated from
this incubator. 😊 Among new features that I added are QuickSearch
command, that allows to quickly find predefined text or regular
expression in text files. I personally find it useful for editing
markdown, because you can set the regular expression to search for
next/previous heading, and also for programming. Another new feature
allows to set system priority for NVDA process – this might improve
responsiveness of NVDA, especially when CPU load is high.

·Github: https://github.com/mltony/nvda-tonys-enhancements/

·Download:
https://github.com/mltony/nvda-tonys-enhancements/releases/download/v1.8/tonysEnhancements-1.8.nvda-addon

<https://github.com/mltony/nvda-tonys-enhancements/releases/download/v1.8/tonysEnhancements-1.8.nvda-addon>


Other


NVDA Symbols

This is not an add-on, but rather a comprehensive (more or less) table
of unicode characters with their proper English names. In particular,
it includes math symbols (the ones that are not defined in NVDA),
Greek letters, technical symbols, various arrows, etc. If you’re
Greek, you would probably want to exclude Greek letters from this
dictionary. If you speak CJK languages, you would probably want to
exclude fixed-width punctuation page from that dictionary. This table
would need to be added manually to your symbols.dic file in NVDA user
config directory.

·Github: https://github.com/mltony/nvda-symbols/
<https://github.com/mltony/nvda-symbols/>

·Download:
https://raw.githubusercontent.com/mltony/nvda-symbols/main/final.dic
<https://raw.githubusercontent.com/mltony/nvda-symbols/main/final.dic>

Let me know what you think!

Belated happy new year!

--Tony
Re: Windows 10 native Mail app

Joseph Lee
 

Hi,

Parts of Windows 10 App Essentials are being rolled into NVDA Core at the moment. NVDA 2020.4 includes a notable contribution from this add-on, namely support for modern Windows 10 Calculator.

I noted “parts of the add-on” because of the way Windows 10 and its apps are developed: Windows 10 is a service, therefore changes happen frequently. This necessitates keeping up with Windows 10 and its apps on an ongoing basis – a bit close to real-time, but not quite. What makes it hard is that changes made to Windows 10 and apps can be reversed at any moment, therefore causing developers to scramble to undo changes or put compatibility layer in place. Add to the fact that NVDA stable releases happen in a matter of months (typically two to three months), and because some users install new Windows 10 development builds on a weekly basis, by the time a new NVDA stable version comes out, what NVDA knows about Windows 10 would be really out of date. Therefore a safer approach is letting Windows 10 App Essentials add-on fill the gap until certain Windows 10 features are announced as being made available to the general public, and then submit changes from the add-on to NVDA Core so it can be included in the next NVDA stable release. This is the reason why, at least once a month or two, you’ll get Windows 10 App Essentials update announcement.

To illustrate what I’m saying, here’s the procedure I employ when developing Windows 10 App Essentials add-on:

  1. As a Windows Insider, I install Windows 10 development builds on a weekly basis. We have folks here and on Win10 Forum for Screen Reader Users who are on the same boat as I.
  2. I read release notes for builds carefully, trying to see if there are visible changes that I can test.
  3. After installing a new build, I spend some time exploring new and changed features.
  4. If I do discover a bug, I debug it and try to come up with a fix.
  5. Once a fix (or several of them) is tested and verified, I package it as part of an add-on development snapshot, which is then deployed so you can get it. These development snapshots are equivalent to NVDA alpha builds.
  6. If a change is made to NVDA (especially from an alpha build) that will break the add-on, I package workarounds and deploy it as a snapshot.
  7. For items 5 and 6, I try my best to limit snapshots to once a day. Sometimes you’ll see fixes for Windows 10 builds, sometimes a workaround for NVDA is included, sometimes both, sometimes just localization updates. The above procedure is also applicable when I write a fix for app support.
  8. Toward the middle of the month, I finalize the next stable release and prepare the add-on for stable channel distribution.
  9. Close to end of the month, I submit the next stable add-on to NVDA add-ons community for distribution. This can change if the last Windows 10 build of the month makes significant changes that will break the add-on and/or NVDA, in which case I delay the stable release in order to let folks test last minute fixes. Typically this happens because a change is made to an app’s accessibility API implementation (typically UIA property or event changes) that will force me to write compatibility layer for old and new apps, or the executable for a Windows 10 app changes which breaks not only the add-on, but also NVDA itself (this happened last year when the executable file name for Mail and Calendar for Insiders changed, which broke NVDA’s Mail app support facility; a fix is included in a recent NVDA release, but was made close to unnecessary as the Mail and Calendar app executable file name was reverted to the name used until 2019; this delayed Windows 10 App Essentials 21.01 by a few days so I can work on supporting old and new Mail and Calendar app releases).

In other words, these days Windows 10 App Essentials add-on has become a testing platform for features that will be included in NVDA Core given stability over time. This is not limited to WinTenApps at all – you may have noticed that parts of other add-ons made their way into NVDA Core, the biggest change planned being incorporating Add-on Updater into NVDA Core in the future (a different topic).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Luke Robinett
Sent: Sunday, January 17, 2021 11:58 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Windows 10 native Mail app

 

Out of curiosity, if an add-on is needed to have reliable access to what are considered essential Windows apps, I just gotta ask… Why not just roll that into the core functionality of NVDA?



On Jan 14, 2021, at 5:22 AM, Chris Mullins <cjmullins29@...> wrote:



Hi Brian

If you are using Windows 10 I would install the Windows 10 App essentials add-on, which smoothes out some of the accessibility wrinkles within the OS and it’s apps, including Windows Mail.

 

Cheers

Chris  

 

From: Brian Williams
Sent: 14 January 2021 07:49
To: nvda@nvda.groups.io
Subject: [nvda] Windows 10 native Mail app

 

Hi all, recently returned to windows from a Macbook which I never really got on with. Using the native app for mail, going to the list of emails I have received I press enter to open one. I am only then able to read it line by line  by holding down the control Key and using the down arrow. If I just use the down arrow key it reads the same line over and over. Is this an issue with NVDA, is there a keyboard command I am using wrongly or missing? The mail app does seem to be a bit fiddly but I don’t know whether it’s Windows 10 problem or a NVDA problem. is there a specific NVDA list of keystrokes to use within the mail app? Grateful for your help.

Brian

 

 

 

 

 
Re: Windows 10 native Mail app

Chris Mullins
 

Hi

Some of it does get rolled into the NVDA core but I think Joseph Lee uses the add-on as a vehicle to apply solutions quickly without having to wait for NVDA releases.

 

Cheers

Chris

 

From: Luke Robinett
Sent: 17 January 2021 19:58
To: nvda@nvda.groups.io
Subject: Re: [nvda] Windows 10 native Mail app

 

Out of curiosity, if an add-on is needed to have reliable access to what are considered essential Windows apps, I just gotta ask… Why not just roll that into the core functionality of NVDA?



On Jan 14, 2021, at 5:22 AM, Chris Mullins <cjmullins29@...> wrote:



Hi Brian

If you are using Windows 10 I would install the Windows 10 App essentials add-on, which smoothes out some of the accessibility wrinkles within the OS and it’s apps, including Windows Mail.

 

Cheers

Chris  

 

From: Brian Williams
Sent: 14 January 2021 07:49
To: nvda@nvda.groups.io
Subject: [nvda] Windows 10 native Mail app

 

Hi all, recently returned to windows from a Macbook which I never really got on with. Using the native app for mail, going to the list of emails I have received I press enter to open one. I am only then able to read it line by line  by holding down the control Key and using the down arrow. If I just use the down arrow key it reads the same line over and over. Is this an issue with NVDA, is there a keyboard command I am using wrongly or missing? The mail app does seem to be a bit fiddly but I don’t know whether it’s Windows 10 problem or a NVDA problem. is there a specific NVDA list of keystrokes to use within the mail app? Grateful for your help.

Brian

 

 

 

 

 

 
Re: Windows 10 native Mail app

Luke Robinett
 

Out of curiosity, if an add-on is needed to have reliable access to what are considered essential Windows apps, I just gotta ask… Why not just roll that into the core functionality of NVDA?

On Jan 14, 2021, at 5:22 AM, Chris Mullins <cjmullins29@...> wrote:



Hi Brian

If you are using Windows 10 I would install the Windows 10 App essentials add-on, which smoothes out some of the accessibility wrinkles within the OS and it’s apps, including Windows Mail.

 

Cheers

Chris  

 

From: Brian Williams
Sent: 14 January 2021 07:49
To: nvda@nvda.groups.io
Subject: [nvda] Windows 10 native Mail app

 

Hi all, recently returned to windows from a Macbook which I never really got on with. Using the native app for mail, going to the list of emails I have received I press enter to open one. I am only then able to read it line by line  by holding down the control Key and using the down arrow. If I just use the down arrow key it reads the same line over and over. Is this an issue with NVDA, is there a keyboard command I am using wrongly or missing? The mail app does seem to be a bit fiddly but I don’t know whether it’s Windows 10 problem or a NVDA problem. is there a specific NVDA list of keystrokes to use within the mail app? Grateful for your help.

Brian

 

 

 

 

 
Re: ending meetings in ms teams

Luke Robinett
 

Yeah, I highly recommend studying and memorizing the teams shortcut keys because they are super useful. As for the leave button, I don’t have that problem myself. The quickest way to move between different sections of teams is to press control F6 or control shift F6 if you want to go backward. Do this a couple of times and you will hear NVDA announce ”toolbar.” In toolbar you can use your left and right arrow keys to move through the controls. The leave button is on the far right and simply hitting spacebar on it exits the chat, at least for me.

On Jan 15, 2021, at 12:24 AM, Sharad Koirala <shakoirala@gmail.com> wrote:

thank u.

On 1/15/21, Vaibhav Saraf <vaibhav.s.acc@gmail.com> wrote:
Hi,

Yes you should be in focus mode, but the mode is auto when you tab into the
list and the shortcut Ctrl + Shift +B is the best bet to end the meeting.

Thanks,
Vaibhav


On Fri, 15 Jan 2021 at 11:10, BlindEducator <blindeducator@gmail.com>
wrote:

Hi,

When in a meeting on MSTeams. Just press Ctrl+shift+b to end a meeting.
Other then that, you can tab or shift+tab until you get to the control
bar.
From there, just left or right arrow to move through your options. You
may
need to toggle between browse and focus modes. I am not in front of my
computer to double check. But one will allow you to arrow around and the
other won’t. You want to arrow to the far right to get to the hang up
button to select let. Hope this helps.










--
Dr. Sharad Koirala
Lecturer
Department of Community Medicine
Gandaki Medical College, Pokhara, Nepal
Re: Reading chats in MS Teams

Luke Robinett
 

I use teams extensively on a daily basis at my job and it seems to work just fine for me. I’ll describe what I’m doing and you tell me where your experience differs.
If I want to chat with somebody from my chat history, I press control 2 which takes me to the recent chat list. I use the up and down arrow keys to find the chat I want and then hit enter to open it. This puts focus in the text box of that chat. If I press shift tab I land inside the messages area. I press NVDA spacebar to enter forms mode. While in forms mode, I can simply use the up and down arrow keys to move easily from message to message. Pressing enter on a message gives me reactions and while in that screen, pressing tab gets me a menu with more options. Hitting escape a few times gets me back to the main messages list.
If you haven’t already, I recommend studying and learning the Microsoft teams shortcut keys because they are extremely useful. Hope that helps. If I’m not addressing your question, let me know where I went wrong.
Re: jump to next occurrence of a word in explorer documents

benmoxey@...
 

Hi Monti

Use Control + Page Down to take you to the next result, and Control + Page Up to take you to the previous. Note that the result is automatically selected when you navigate with this method.

If you have not performed a document search in Word, the Control + Page Up and Control + Page Down shortcuts move to the previous and next page by default.

If you have performed a document search and want the Control + Page Up and Control + Page Down shortcuts to navigate by page again, simply press Control + G to load the Go To dialog box. It will be set to page automatically. Enter a desired page number if you like or just press Enter. Then, simply escape the dialog box and return to the document.

Cheers

Ben

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Monday, 18 January 2021 5:18 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] jump to next occurrence of a word in explorer documents

To find the first occurrence, do the same as in Notepad. To find repeated occurrences, use control end. I would think control home would move back to the previous occurrence but I may never have tried that.

Gene
-----Original Message-----
From: Monte Single
Sent: Sunday, January 17, 2021 12:05 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] jump to next occurrence of a word in explorer documents



Cheers, MonteHow do I do this in m s word 2016?

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: January 17, 2021 8:17 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] jump to next occurrence of a word in explorer documents

It isn't always the same in every text editor or word processor. Usually,
the following will work. It does in Notepad.
Use control f to open find.
Type what you are searching for and press enter.
Then press escape. You have closed the search dialog and You are now on the
first occurrence of what you are searching for. If nothing is found you
will receive an error message which you can close by pressing escape twice.
You are actually closing the escape message and then closing the search
dialog.
To search for repeated occurrences, simply press f3. You will move to the
next occurrence. You don't have to press escape after using f3.

To summarize, control f, Type the search and press enter.
Press escape.
To repeat the search, press f3. Don't press escape. You are on the word if
it is found, or you will get an error message you can close with escape.

Gene
-----Original Message-----
From: mcLeod stinnett
Sent: Saturday, January 16, 2021 11:56 PM
To: nvda@nvda.groups.io
Subject: [nvda] jump to next occurrence of a word in explorer documents


--
from mack often I take articles along with their subsequent comments
offline and put them in notepad. I save the article and read it in windows
explorer, documents. the only problem is I don't know how to jump to the
next occurrence of a word like comments, to get to the next post. if I read
the article on the page, I press insert f3 and press down arrow to continue
reading. how to do this in documents, thanks.
Re: Excel 2016: Formulas

Louis Maher
 

In editing Excel cells, sometime it is necessary to make the following configuration change.

 

You can try unchecking the box which says “allow editing directly in cells”.  In Excel 365, do this:

Open an Excel spreadsheet. 

Type alt + f. Up arrow to options, hit enter. Down arrow to advanced. Tab until you find the box which says “allow editing directly in cells. Uncheck that

box. Shift + Tab until you reach OK. Hit enter.

 

 

 

Regards

Louis Maher

Phone: 713-444-7838

E-mail ljmaher03@...

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Jonathan COHN via groups.io
Sent: Sunday, January 17, 2021 11:47 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Excel 2016: Formulas

 

F2 brings you to the formula bar. This does have something to do with the auto complete, but I haven't edited formulas in Excel in a couple years, so I don't remember exactly why there are issues. Using arrow keys, I believe jumps you to the excel table to select a cell or group s of cells to add to the formula. 
Re: prezi with nvda

farhan israk
 

No


On Sun, 17 Jan 2021, 11:42 pm Jonathan COHN via groups.io, <jonathan.c.cohn=icloud.com@groups.io> wrote:
As of two years ago, it appeared this platform was inaccessible. Did you look at their web site to see if they have an accessibility statement? 


On Jan 17, 2021, at 11:51, farhan israk <fahim.net.2014@...> wrote:

Prezi
Re: jump to next occurrence of a word in explorer documents

Gene
 

To find the first occurrence, do the same as in Notepad. To find repeated occurrences, use control end. I would think control home would move back to the previous occurrence but I may never have tried that.

Gene

-----Original Message-----
From: Monte Single
Sent: Sunday, January 17, 2021 12:05 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] jump to next occurrence of a word in explorer documents



Cheers, MonteHow do I do this in m s word 2016?

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: January 17, 2021 8:17 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] jump to next occurrence of a word in explorer documents

It isn't always the same in every text editor or word processor. Usually, the following will work. It does in Notepad.
Use control f to open find.
Type what you are searching for and press enter.
Then press escape. You have closed the search dialog and You are now on the first occurrence of what you are searching for. If nothing is found you will receive an error message which you can close by pressing escape twice.
You are actually closing the escape message and then closing the search dialog.
To search for repeated occurrences, simply press f3. You will move to the next occurrence. You don't have to press escape after using f3.

To summarize, control f, Type the search and press enter.
Press escape.
To repeat the search, press f3. Don't press escape. You are on the word if it is found, or you will get an error message you can close with escape.

Gene
-----Original Message-----
From: mcLeod stinnett
Sent: Saturday, January 16, 2021 11:56 PM
To: nvda@nvda.groups.io
Subject: [nvda] jump to next occurrence of a word in explorer documents


--
from mack often I take articles along with their subsequent comments
offline and put them in notepad. I save the article and read it in windows
explorer, documents. the only problem is I don't know how to jump to the
next occurrence of a word like comments, to get to the next post. if I read
the article on the page, I press insert f3 and press down arrow to continue
reading. how to do this in documents, thanks.
Re: jump to next occurrence of a word in explorer documents

Monte Single
 

Cheers, MonteHow do I do this in m s word 2016?

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: January 17, 2021 8:17 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] jump to next occurrence of a word in explorer documents

It isn't always the same in every text editor or word processor. Usually, the following will work. It does in Notepad.
Use control f to open find.
Type what you are searching for and press enter.
Then press escape. You have closed the search dialog and You are now on the first occurrence of what you are searching for. If nothing is found you will receive an error message which you can close by pressing escape twice.
You are actually closing the escape message and then closing the search dialog.
To search for repeated occurrences, simply press f3. You will move to the next occurrence. You don't have to press escape after using f3.

To summarize, control f, Type the search and press enter.
Press escape.
To repeat the search, press f3. Don't press escape. You are on the word if it is found, or you will get an error message you can close with escape.

Gene
-----Original Message-----
From: mcLeod stinnett
Sent: Saturday, January 16, 2021 11:56 PM
To: nvda@nvda.groups.io
Subject: [nvda] jump to next occurrence of a word in explorer documents


--
from mack often I take articles along with their subsequent comments
offline and put them in notepad. I save the article and read it in windows
explorer, documents. the only problem is I don't know how to jump to the
next occurrence of a word like comments, to get to the next post. if I read
the article on the page, I press insert f3 and press down arrow to continue
reading. how to do this in documents, thanks.
Re: Excel 2016: Formulas

Jonathan COHN
 

F2 brings you to the formula bar. This does have something to do with the auto complete, but I haven't edited formulas in Excel in a couple years, so I don't remember exactly why there are issues. Using arrow keys, I believe jumps you to the excel table to select a cell or group s of cells to add to the formula. 
Re: prezi with nvda

Jonathan COHN
 

As of two years ago, it appeared this platform was inaccessible. Did you look at their web site to see if they have an accessibility statement? 


On Jan 17, 2021, at 11:51, farhan israk <fahim.net.2014@...> wrote:

Prezi
Re: Is anyone using a password manager?

Hope Williamson
 

I use LastPass, and have since 2017. For me it works fine. I can edit, update and add accounts as I need, and if I'm logged into Lastpass, it will auto-fill login information for whatever site I'm trying to log into at the moment.

On 1/16/2021 1:39 PM, Brian Vogel wrote:
I've been using Password Safe, and its Android port, for many years now.  I have my vault synced/stored on my Google Drive, though it can work with any one of a number of cloud based services.  I do this because I want access to my vault on the fly and want updates done on Android to show up on Windows and vice versa.  Both the Windows program, and Android app, both keep local copies that they sync with the cloud, in case you were to be in a situation where you had no internet service and needed access.

It's been a while, but I believe I have had a couple of blind clients using this, and given the "old style Windows" interface under Windows I'd be shocked if it were not accessible.  I've never played with the Android port, or iOS port, with TalkBack or VoiceOver, respectively, so cannot speak at all to their accessibility.

--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

The depths of denial one can be pushed to by outside forces of disapproval can make you not even recognize yourself to yourself.

       ~ Brian Vogel

 
prezi with nvda

farhan israk
 

Is Prezi accessible with nvda? How to use it?
Re: jump to next occurrence of a word in explorer documents

Brian Vogel
 

F3 has been the "Find next occurrence" function under Windows in virtually every program almost since the very beginning.  I use it constantly.

A variant on that theme is even used in screen reader finds, where "screen reader key" plus F3 does a screen reader find next.
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

The depths of denial one can be pushed to by outside forces of disapproval can make you not even recognize yourself to yourself.

       ~ Brian Vogel

 
Re: jump to next occurrence of a word in explorer documents

Monte Single
 

Thanks Gene,

That's the vest description I've heard for this activity.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: January 17, 2021 8:17 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] jump to next occurrence of a word in explorer documents

It isn't always the same in every text editor or word processor. Usually, the following will work. It does in Notepad.
Use control f to open find.
Type what you are searching for and press enter.
Then press escape. You have closed the search dialog and You are now on the first occurrence of what you are searching for. If nothing is found you will receive an error message which you can close by pressing escape twice.
You are actually closing the escape message and then closing the search dialog.
To search for repeated occurrences, simply press f3. You will move to the next occurrence. You don't have to press escape after using f3.

To summarize, control f, Type the search and press enter.
Press escape.
To repeat the search, press f3. Don't press escape. You are on the word if it is found, or you will get an error message you can close with escape.

Gene
-----Original Message-----
From: mcLeod stinnett
Sent: Saturday, January 16, 2021 11:56 PM
To: nvda@nvda.groups.io
Subject: [nvda] jump to next occurrence of a word in explorer documents


--
from mack often I take articles along with their subsequent comments
offline and put them in notepad. I save the article and read it in windows
explorer, documents. the only problem is I don't know how to jump to the
next occurrence of a word like comments, to get to the next post. if I read
the article on the page, I press insert f3 and press down arrow to continue
reading. how to do this in documents, thanks.
Re: jump to next occurrence of a word in explorer documents

Gene
 

It isn't always the same in every text editor or word processor. Usually, the following will work. It does in Notepad.
Use control f to open find.
Type what you are searching for and press enter.
Then press escape. You have closed the search dialog and You are now on the first occurrence of what you are searching for. If nothing is found you will receive an error message which you can close by pressing escape twice. You are actually closing the escape message and then closing the search dialog.
To search for repeated occurrences, simply press f3. You will move to the next occurrence. You don't have to press escape after using f3.

To summarize, control f, Type the search and press enter.
Press escape.
To repeat the search, press f3. Don't press escape. You are on the word if it is found, or you will get an error message you can close with escape.

Gene

-----Original Message-----
From: mcLeod stinnett
Sent: Saturday, January 16, 2021 11:56 PM
To: nvda@nvda.groups.io
Subject: [nvda] jump to next occurrence of a word in explorer documents


--
from mack often I take articles along with their subsequent comments offline and put them in notepad. I save the article and read it in windows explorer, documents. the only problem is I don't know how to jump to the next occurrence of a word like comments, to get to the next post. if I read the article on the page, I press insert f3 and press down arrow to continue reading. how to do this in documents, thanks.
Re: Is anyone using a password manager?

andru fou
 

I use Keypass and it works fine.
You can open the site with your default browser or choose from your
list of browsers to use Firefox 52.9 for Wbvvisum.
https://keepass.info

On 1/17/21, Stephen <whocrazy@internode.on.net> wrote:
For simplicity, and for both an offline and cloud solution, it seems like
1password may be the better of the bunch, while kee pass may suit some
people
who like to tinker and customise their environment.
Cheers.







----- Original Message -----
From: Sascha Cowley via groups.io <sascha.camille=yahoo.com@groups.io>
Reply-To: <nvda@nvda.groups.io>
To: <nvda@nvda.groups.io>
Sent: 1/17/2021 5:29:09 PM
Subject: Re: [nvda] Is anyone using a password manager?


I use Bitwarden. The Firefox addon (and thus presumably the Chrome/Edge
addon)
is very usable with NVDA, though there are a few things that
aren't especially intuitive. The Android app is mostly accessible, but most
of the inaccessible parts can be worked out either through context or just
trying and seeing what happens. The iOS app doesn't
play especially nicely with VoiceOver, but is usable.
2341 - 2360 of 83227