Date   

Re: revo uninstaller portable not accessible with NVDA?

 

I had that, use bulk crap uninstaller instead.

Its a lot better, I had this on an old toshiba that was upgraded by a person that didn't do a good job of it.

The system needed a lot of work, and while I did do the repair and get it working if I didn't have a week I would have liked to just reformat but couldn't.

Basically, bulk crap helpped me a lot with manual removal of apps and such.

Also klockman software which make this have a good usefull configurable mixer for volume controls with profiles which I have not used.

So just like enhancements you could set a profile for different volumes and name them, like gaming, outside, office, etc.

I don't usually need this but I could see how that would work on a multiple account situation, my friend that is into gaming is on a system with shared accounts, the gaming desktop his family uses has a profile for each of them, which has controler configurations, displays, and even down to indevidual fan speed settings so its probably something like that.



On 27/01/2021 6:15 pm, Sarah k Alawami wrote:

I’m trying to actually use revo uninstaller portable to, well, uninstall something, I cannot. I used it in the past, but I don’t remember the thing being so inaccessible. The list won’t populate, well, it will, but even when using screen review, I cannot route to and click anything to show the list view. It shows up as “custom control” which does not help me much, if at all. Any advice would be right now very much appreciated.

 

Thanks so much to all.

 

Sarah Alawami, owner of TFfP. We are also on lbry as well.

 

Stay in touch with us via our discord. This is an easier way to both contact us, and get to know your fellow listeners.

 


Re: Spinning numbers on a bank page?!

 

Ring your bank and explain how inaccessible that is.

Ask if you can login without this stupid code or type it in like other 2 step codes.

My bank doesn't have this stupidness at all.

I do need help entering pins for things when I need to make new pins, I'd usually would do it in a terminal, but covid,= going out, to wash hands, to stand in a cue to access, an eftpos terminal, to wash hands, to take my mask on and off just to activate a stupid debit card aint worth going out to do that.

I did it but needed sight for the pin entry.

On my bank with withdrawls, you can enter a net code but you can do without it.

I know its not secure to stop this stuff but if I had this issue, I'd just do without it.

Basically you need to tell your bank tha  because of their security system you can't get access to your account and you have a right to do that, so they can either remove it or get you to bypass it or fix it.

If they don't then time to change to another bank and give them a bad rating.



On 27/01/2021 3:32 pm, Ibrahim Abedrabbo wrote:

Hi folks,

This is a little tricky to explain. I am trying to log on to my bank using my pc and NVDA. When I enter my user id and pass word and click on login, it takes me to the next screen where it asks me to enter a code that has been sent to my cell phone. When I go to the edit box to enter the number it gives me 000000 and expects me to spin the zeros into the numbers in the code. When I go to the first zero and I spin it with the up and down arrows to the first number in the code, I can’t move to the next zero to enter the second digit of the code. If I move with the right arrow and I spin it rotates the first digit instead. Have anyone seen such a weird way of the two factor verification on any web page like this? How did you manage it? I deleted the zeros and typed the number in their place but it did not take it. I am afraid if I continue to try they would block my access and it would be a hassel to unblock it.

If anyone has any experience with this, Please help.

 

Regards,

 

Ibrahim


revo uninstaller portable not accessible with NVDA?

Sarah k Alawami
 

I’m trying to actually use revo uninstaller portable to, well, uninstall something, I cannot. I used it in the past, but I don’t remember the thing being so inaccessible. The list won’t populate, well, it will, but even when using screen review, I cannot route to and click anything to show the list view. It shows up as “custom control” which does not help me much, if at all. Any advice would be right now very much appreciated.

 

Thanks so much to all.

 

Sarah Alawami, owner of TFfP. We are also on lbry as well.

 

Stay in touch with us via our discord. This is an easier way to both contact us, and get to know your fellow listeners.

 


Re: Spinning numbers on a bank page?!

Gene
 

In interfaces like this, where the up and down arrow keys change the numbers, you can usually move to the next field with the right arrow and the previous field with the left arrow.

This interface is used on my feature phone for setting the alarm and in Windows 7 in the Task Manager.

I have no idea if tabbing would work, I'm saying that the expectation that the right arrow would move to a different field follows the usual design of such interfaces.

Gene

-----Original Message-----
From: Arianna Sepulveda
Sent: Tuesday, January 26, 2021 8:40 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Spinning numbers on a bank page?!


Maybe tab would take you to the next number box in the sequence? It makes sense that the arrows aren't working, since the arrows spin the numbers. I've never seen anything like this way of putting in a code, but maybe tabbing through once you set the first number will work. Just a thought.


Thanks,
Ari

On Jan 26, 2021, at 9:32 PM, Ibrahim Abedrabbo <abedrabboibrahim@gmail.com> wrote:





Hi folks,

This is a little tricky to explain. I am trying to log on to my bank using my pc and NVDA. When I enter my user id and pass word and click on login, it takes me to the next screen where it asks me to enter a code that has been sent to my cell phone. When I go to the edit box to enter the number it gives me 000000 and expects me to spin the zeros into the numbers in the code. When I go to the first zero and I spin it with the up and down arrows to the first number in the code, I can’t move to the next zero to enter the second digit of the code. If I move with the right arrow and I spin it rotates the first digit instead. Have anyone seen such a weird way of the two factor verification on any web page like this? How did you manage it? I deleted the zeros and typed the number in their place but it did not take it. I am afraid if I continue to try they would block my access and it would be a hassel to unblock it.

If anyone has any experience with this, Please help.



Regards,



Ibrahim


Re: Spinning numbers on a bank page?!

Ibrahim Abedrabbo
 

I tried tab but it took me to next. . This is the weirdest thing I have seen.

I am able to access my account fine using my iPhone, but I need to use a couple of features only available on the desktop.

Cheers,


Ibrahim

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Arianna Sepulveda
Sent: Tuesday, January 26, 2021 9:41 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Spinning numbers on a bank page?!

 

Maybe tab would take you to the next number box in the sequence? It makes sense that the arrows aren't working, since the arrows spin the numbers. I've never seen anything like this way of putting in a code, but maybe tabbing through once you set the first number will work. Just a thought.

 

 

Thanks,

Ari



On Jan 26, 2021, at 9:32 PM, Ibrahim Abedrabbo <abedrabboibrahim@...> wrote:



Hi folks,

This is a little tricky to explain. I am trying to log on to my bank using my pc and NVDA. When I enter my user id and pass word and click on login, it takes me to the next screen where it asks me to enter a code that has been sent to my cell phone. When I go to the edit box to enter the number it gives me 000000 and expects me to spin the zeros into the numbers in the code. When I go to the first zero and I spin it with the up and down arrows to the first number in the code, I can’t move to the next zero to enter the second digit of the code. If I move with the right arrow and I spin it rotates the first digit instead. Have anyone seen such a weird way of the two factor verification on any web page like this? How did you manage it? I deleted the zeros and typed the number in their place but it did not take it. I am afraid if I continue to try they would block my access and it would be a hassel to unblock it.

If anyone has any experience with this, Please help.

 

Regards,

 

Ibrahim


Re: Spinning numbers on a bank page?!

Arianna Sepulveda
 

Maybe tab would take you to the next number box in the sequence? It makes sense that the arrows aren't working, since the arrows spin the numbers. I've never seen anything like this way of putting in a code, but maybe tabbing through once you set the first number will work. Just a thought.


Thanks,
Ari

On Jan 26, 2021, at 9:32 PM, Ibrahim Abedrabbo <abedrabboibrahim@...> wrote:



Hi folks,

This is a little tricky to explain. I am trying to log on to my bank using my pc and NVDA. When I enter my user id and pass word and click on login, it takes me to the next screen where it asks me to enter a code that has been sent to my cell phone. When I go to the edit box to enter the number it gives me 000000 and expects me to spin the zeros into the numbers in the code. When I go to the first zero and I spin it with the up and down arrows to the first number in the code, I can’t move to the next zero to enter the second digit of the code. If I move with the right arrow and I spin it rotates the first digit instead. Have anyone seen such a weird way of the two factor verification on any web page like this? How did you manage it? I deleted the zeros and typed the number in their place but it did not take it. I am afraid if I continue to try they would block my access and it would be a hassel to unblock it.

If anyone has any experience with this, Please help.

 

Regards,

 

Ibrahim


Re: NVDA Keyboard Issue

Quentin Christensen
 

Is NVDA set to desktop or laptop keyboard layout?  It gives you the option to set it when you install, but if you hit next without paying attention the default is Desktop.  Press NVDA+control+k to open the keyboard settings (your NVDA key will be either INSERT or CAPS LOCK, and that is independent of the keyboard layout).  The first option on this screen is keyboard layout.

Note also that for historical reasons, NVDA out of the box, will still retain the "desktop layout" number pad functions even in laptop layout - there is an add-on if you want to disable that - https://addons.nvda-project.org/addons/numpadNavMode.en.html

Kind regards

Quentin.

On Mon, Jan 25, 2021 at 1:30 AM Blind allday <blind247365@...> wrote:

I got a new laptop and it’s one of those that has a number pad on the right of it. You also must hold down the function key to activate any of the F keys. I was able to turn that off.

So, to the issue. I can move by character, word and line but only using the number pad on the right not the original NVDA laptop layout commands. I tried going to the NVDA preferences>settings>keyboard but I couldn’t find anything that could fix the problem.

I think it may be a problem with my laptop keyboard and not NVDA. Has anyone else had this problem?



--
Quentin Christensen
Training and Support Manager


Re: Firefox problems using NVDA

Quentin Christensen
 

If NVDA is reporting unknown then definitely the first thing I would try is NVDA+N, then T then "Run COM Registration fixing tool" - that's basically exactly the description of the problem it was designed to fix.

Also, if you haven't restarted the whole PC since updating Firefox, do that first as well.

Kind regards

Quentin.

On Sun, Jan 24, 2021 at 10:34 PM mcLeod stinnett <macks75205@...> wrote:


--
from mack  I am in the U. S. and use chase all the time, but I don't use the ESR version of firefox. if you want to stay with that, install the most up to date standard version as a portable copy. when I open library, ctrl shft o and choose the bookmark for chase I land on a page where I can enter user name and password. this is the link,
 https://secure05b.chase.com/web/auth/dashboard#/dashboard/overviewAccounts/overview/index







--
Quentin Christensen
Training and Support Manager


Spinning numbers on a bank page?!

Ibrahim Abedrabbo
 

Hi folks,

This is a little tricky to explain. I am trying to log on to my bank using my pc and NVDA. When I enter my user id and pass word and click on login, it takes me to the next screen where it asks me to enter a code that has been sent to my cell phone. When I go to the edit box to enter the number it gives me 000000 and expects me to spin the zeros into the numbers in the code. When I go to the first zero and I spin it with the up and down arrows to the first number in the code, I can’t move to the next zero to enter the second digit of the code. If I move with the right arrow and I spin it rotates the first digit instead. Have anyone seen such a weird way of the two factor verification on any web page like this? How did you manage it? I deleted the zeros and typed the number in their place but it did not take it. I am afraid if I continue to try they would block my access and it would be a hassel to unblock it.

If anyone has any experience with this, Please help.

 

Regards,

 

Ibrahim


Re: loss of shortcut keys

Quentin Christensen
 

I just commented on the linked issue, not sure if it's useful, but what I said was:

"As you noted in the log, at one point, eery keystroke includes the Windows key.  I have had keyboards in the past where they seemed to get a modifier key stuck down (shift, alt or control, etc) - in that case, what I did was very technical, but basically I just kept pressing the offending key quickly  and repeatedly until say a dozen times in a couple of seconds and it usually sorted itself out.  If you try that with the Windows key when this happens does it make a difference?

Otherwise, a log with add-ons disabled would really help confirm this is NOT caused by an add-on."

And Gene, it's still worth reporting issues in Windows 7.  Obviously if the issue ends up being with Windows itself, you're probably not going to get much resolution, but NVDA still supports Windows 7, so we are willing to look Windows 7 issues (and for an issue like this, if we confirmed that it happens across Windows versions is potentially useful)

Quentin.

On Sun, Jan 24, 2021 at 3:29 AM zahra <nasrinkhaksar3@...> wrote:
hello.
i had this issue for awhile, but thanks God, i found a workarround for it.
when nvda keyes dont work, do the following.
1. press nvda plus q.
2. nvda exit dialog options are in the background.
3. press alt plus tab to find the dialog box.
4. press scape to close it.
in normal cases, when you press nvda plus q, nvda dialog box is
available and you can navigate immediately instead of using alt tab.

On 1/22/21, Don H <lmddh50@...> wrote:
> Running NVDA 2020.4 beta 4 on a Win 10 20h2 system.
> Having a lot of issues with all the shortuct keys for NVDA not working.
> Only way to get them working again is to reload NVDA.
>
>
>
>
>
>
>


--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali







--
Quentin Christensen
Training and Support Manager


Re: message announced by NVDA

Quentin Christensen
 

In the User guide under object presentation settings: https://www.nvaccess.org/files/nvda/documentation/userGuide.html#ObjectPresentationSettings

Report Object descriptions is described as:

"Uncheck this checkbox if you don't wish to have the description reported along with objects (i.e. search suggestions, reporting of whole dialog window right after the dialog opens, etc.)."

So my reading is that you are encountering exactly what the option says will happen if you disable it?

Perhaps the question then is more what do you want read differently when you have this option enabled / disabled?  And / or in this case, if you largely want it off, but want it on in one program, using a configuration profile might be the option here.

Quentin.

On Sat, Jan 23, 2021 at 7:57 PM bering.p <bering.p@...> wrote:
Hi to all.
I am sharing with you an observation I made concerning the announcement of messages by NVDA and which may be the subject of a PR.

When the option "Report object descriptions" is disabled, NVDA does not speak the text in dialog boxes.
This is annoying when it comes to a message informing the user or questioning him.
For example:
- following a manual search for update request.
- when an add-on uses "gui.messageBox" to query the user.

In this case, it is necessary to read the contents of the dialog box using "NVDA + b".

I think that any message emitted by NVDA should be announced regardless of the state of activation of the option.
What do you think ?
And if you agree, please do the PR.

best regards.
Paul.



--
Quentin Christensen
Training and Support Manager


Re: auto ducking

brice Mijares
 

Thanks for the tip. I'll check it out.

On 1/26/2021 11:33 AM, Sarah k Alawami wrote:
Go to the sound setting in your system tray, then check the communications tab and see if the do nothing radio button in that section is checked. If if it is not, check it and see if that helps a bit.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of brice Mijares
Sent: Tuesday, January 26, 2021 10:53 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] auto ducking

Thank you very much. I really don't know if this is my problem, but my new HP laptop Pro drops in volume at times.

Windows 10 Pro, 20H2 (64-bit) build 19042.746

On 1/26/2021 10:20 AM, Greg Wocher wrote:
Hello,
If you use the command NVDA plus shift plus D, it will cycle you thru the ducking options.

Greg Wocher


On Jan 26, 2021, at 1:07 PM, brice Mijares <bmijares33@gmail.com> wrote:

Is there a setting in NVDA for auto ducking? if so, please explain where I can find this setting. Thank you.
















Re: auto ducking

Sarah k Alawami
 

Go to the sound setting in your system tray, then check the communications tab and see if the do nothing radio button in that section is checked. If if it is not, check it and see if that helps a bit.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of brice Mijares
Sent: Tuesday, January 26, 2021 10:53 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] auto ducking

Thank you very much. I really don't know if this is my problem, but my new HP laptop Pro drops in volume at times.

Windows 10 Pro, 20H2 (64-bit) build 19042.746

On 1/26/2021 10:20 AM, Greg Wocher wrote:
Hello,
If you use the command NVDA plus shift plus D, it will cycle you thru the ducking options.

Greg Wocher


On Jan 26, 2021, at 1:07 PM, brice Mijares <bmijares33@gmail.com> wrote:

Is there a setting in NVDA for auto ducking? if so, please explain where I can find this setting. Thank you.









Re: auto ducking

Sarah k Alawami
 

OH, woops? The steps I gave were a bit loner, but it will still get you to
the same location of sorts. There are so many commands, it is almost
imposible to memmorise. Lol!

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Greg Wocher
Sent: Tuesday, January 26, 2021 10:21 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] auto ducking

Hello,
If you use the command NVDA plus shift plus D, it will cycle you thru the
ducking options.

Greg Wocher


On Jan 26, 2021, at 1:07 PM, brice Mijares <bmijares33@gmail.com> wrote:

Is there a setting in NVDA for auto ducking? if so, please explain where I
can find this setting. Thank you.






Re: auto ducking

Sarah k Alawami
 

Try nvda control s. then tab to and choose the ducking feature. Next click ok. The section you are looking for is "auto ducking mode."

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of brice Mijares
Sent: Tuesday, January 26, 2021 10:07 AM
To: nvda <nvda@nvda.groups.io>
Subject: [nvda] auto ducking

Is there a setting in NVDA for auto ducking? if so, please explain where I can find this setting. Thank you.


Re: auto ducking

brice Mijares
 

Thank you very much. I really don't know if this is my problem, but my new HP laptop Pro drops in volume at times.

Windows 10 Pro, 20H2 (64-bit) build 19042.746

On 1/26/2021 10:20 AM, Greg Wocher wrote:
Hello,
If you use the command NVDA plus shift plus D, it will cycle you thru the ducking options.

Greg Wocher


On Jan 26, 2021, at 1:07 PM, brice Mijares <bmijares33@gmail.com> wrote:

Is there a setting in NVDA for auto ducking? if so, please explain where I can find this setting. Thank you.








Re: auto ducking

Greg Wocher
 

Hello,
If you use the command NVDA plus shift plus D, it will cycle you thru the ducking options.

Greg Wocher

On Jan 26, 2021, at 1:07 PM, brice Mijares <bmijares33@gmail.com> wrote:

Is there a setting in NVDA for auto ducking? if so, please explain where I can find this setting. Thank you.






auto ducking

brice Mijares
 

Is there a setting in NVDA for auto ducking? if so, please explain where I can find this setting. Thank you.


Re: Accessible Video Editor

Sarah k Alawami
 

they might see gaps but what you need to do is nudge the video left or right a bit. use your ears even though it might not be a perfect merge it will still work. It will still render as one item when you do render so long as you choose track. Also don't mute e the audio or the video will turn black so I've been told. I forgot the kkey strokes but look in the actions dialogue. You would be best to ask all of this on the reaper list or the reaper discord.

Take care

--

Sarah Alawami, owner of TFFP. . For more info go to our website.

Check out my adventures with a shadow machine.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on twitch. Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 25 Jan 2021, at 14:16, Luke Robinett wrote:

Hi Sarah,
Any idea why gluing video clips in reaper results in the image blacking out and if there’s a way to avoid this while still being able to glue? Personally I like having things in one big chunk when possible rather than multiple separate pieces. If that isn’t possible, can you explain in a little more detail the technique you described of positioning clips such that there are no visual gaps in playback? For example, if I navigate to the end of one clip and then paste another one, can I be assured sighted folks won’t see any artifacts from this? Thanks!

On Jan 23, 2021, at 10:59 AM, Sarah k Alawami <marrie12@...> wrote:



glue is reaper's merge. It is a nondistructive glue. but just put the items on one track, move them as necessary, I blend mine together so that there is no audible gap then render as mp4. It's almost as if I'm splicing tape, Yes, i did say tape!

--

Sarah Alawami, owner of TFFP. . For more info go to our website.

Check out my adventures with a shadow machine.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on twitch. Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 22 Jan 2021, at 22:03, Debbie April Yuille wrote:

What do you mean by gluing the videos together? Can’t you merge them?

 

Debbie

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sarah k Alawami
Sent: Saturday, 23 January 2021 7:04 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Accessible Video Editor

 

No, I edit videos in reaper all the time. I can do it as quickly as I can a sound file. Just don't glue the items together, or the video will be black.

--

Sarah Alawami, owner of TFFP. . For more info go to our website.

Check out my adventures with a shadow machine.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on twitch. Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 22 Jan 2021, at 11:37, Christian Ohrens wrote:

Hi,
I haven't used Reaper before so don't know much about this program, even it's for free or payed.
But what I read about was that Reaper's video editing function is rather slow, isn't it?

Greetings
Christian

 

Am 22.01.2021 20:22 schrieb Luke Robinett <blindgroupsluke@...>:

*bump*

I asked a similar question here a couple months ago and think it warrants further conversation. It seems an increasing number of us blind folks are interested in starting YouTube channels and doing other things with video video, so hopefully we learn about some good options.

I am also a home recording enthusiast and use a program called reaper to record and mix audio tracks. Reaper is fully accessible once you install a couple of free community created plug-ins. Reaper does provide the most basic of basic video editing. Pretty much just trimming, splitting, sliding things around on the timeline. No effects or transitions or anything else like that. If that’s all you need though, it’s 100% accessible and might be a good option.

 

On Jan 22, 2021, at 7:24 AM, Christian Ohrens <mail@...> wrote:



Hello,

 

Just want to refresh a thread of 2019 which I found in the group’s archive.

 

Are there any suggestions for accessible video editors?

Has anybody tried for example „vegas“ which is now developed by Magix Software? „Sound Forge“ is very accessible, maybe „Vegas“ would it be too?

Or the more professional programs like „Davinci“ or „Premiere“?

 

„Sound Forge“ is also able to edit video but I’m not quite sure if I would ‚destroy‘ the video itself when I’m gonna cut things off. If you want to edit the sound of the video it’s great.

 

Greets and thanks

Christian

 

 

---

 

Christian Ohrens

Freier Journalist, Videoblogger, DJ, Gästeführer

 

Am Stühm-Süd 23, 22175 Hamburg

+49 - (0) - 40 - 59 35 51 59 (Tel.)

+49 - (0) - 171 - 938 92 52 (Mob.)

E-Mail: mail@...

Web: https://christian-ohrens.de/

Twitter: https://twitter.com/CO1984--

 

 


Re: Accessible Video Editor

Luke Robinett <blindgroupsluke@...>
 

Hi Sarah,
Any idea why gluing video clips in reaper results in the image blacking out and if there’s a way to avoid this while still being able to glue? Personally I like having things in one big chunk when possible rather than multiple separate pieces. If that isn’t possible, can you explain in a little more detail the technique you described of positioning clips such that there are no visual gaps in playback? For example, if I navigate to the end of one clip and then paste another one, can I be assured sighted folks won’t see any artifacts from this? Thanks!

On Jan 23, 2021, at 10:59 AM, Sarah k Alawami <marrie12@...> wrote:



glue is reaper's merge. It is a nondistructive glue. but just put the items on one track, move them as necessary, I blend mine together so that there is no audible gap then render as mp4. It's almost as if I'm splicing tape, Yes, i did say tape!

--

Sarah Alawami, owner of TFFP. . For more info go to our website.

Check out my adventures with a shadow machine.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on twitch. Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 22 Jan 2021, at 22:03, Debbie April Yuille wrote:

What do you mean by gluing the videos together? Can’t you merge them?

 

Debbie

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sarah k Alawami
Sent: Saturday, 23 January 2021 7:04 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Accessible Video Editor

 

No, I edit videos in reaper all the time. I can do it as quickly as I can a sound file. Just don't glue the items together, or the video will be black.

--

Sarah Alawami, owner of TFFP. . For more info go to our website.

Check out my adventures with a shadow machine.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on twitch. Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 22 Jan 2021, at 11:37, Christian Ohrens wrote:

Hi,
I haven't used Reaper before so don't know much about this program, even it's for free or payed.
But what I read about was that Reaper's video editing function is rather slow, isn't it?

Greetings
Christian

 

Am 22.01.2021 20:22 schrieb Luke Robinett <blindgroupsluke@...>:

*bump*

I asked a similar question here a couple months ago and think it warrants further conversation. It seems an increasing number of us blind folks are interested in starting YouTube channels and doing other things with video video, so hopefully we learn about some good options.

I am also a home recording enthusiast and use a program called reaper to record and mix audio tracks. Reaper is fully accessible once you install a couple of free community created plug-ins. Reaper does provide the most basic of basic video editing. Pretty much just trimming, splitting, sliding things around on the timeline. No effects or transitions or anything else like that. If that’s all you need though, it’s 100% accessible and might be a good option.

 

On Jan 22, 2021, at 7:24 AM, Christian Ohrens <mail@...> wrote:



Hello,

 

Just want to refresh a thread of 2019 which I found in the group’s archive.

 

Are there any suggestions for accessible video editors?

Has anybody tried for example „vegas“ which is now developed by Magix Software? „Sound Forge“ is very accessible, maybe „Vegas“ would it be too?

Or the more professional programs like „Davinci“ or „Premiere“?

 

„Sound Forge“ is also able to edit video but I’m not quite sure if I would ‚destroy‘ the video itself when I’m gonna cut things off. If you want to edit the sound of the video it’s great.

 

Greets and thanks

Christian

 

 

---

 

Christian Ohrens

Freier Journalist, Videoblogger, DJ, Gästeführer

 

Am Stühm-Süd 23, 22175 Hamburg

+49 - (0) - 40 - 59 35 51 59 (Tel.)

+49 - (0) - 171 - 938 92 52 (Mob.)

E-Mail: mail@...

Web: https://christian-ohrens.de/

Twitter: https://twitter.com/CO1984--

 

 

6661 - 6680 of 87752