Date   

Re: How to start NVDA on an USB drive automatically

Monte Single
 

Hi, I think the option to have a program run upon insertion of usb device was discontinued by micro soft  during or after windows xp.

 

This was for security purposes.

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Christian Ohrens
Sent: February 9, 2021 11:41 PM
To: nvda@nvda.groups.io
Subject: [nvda] How to start NVDA on an USB drive automatically

 

Hello all,

As the subject said: I’m looking for a possibility to let a portable version of NVDA run automatically when I insert an USB drive to my computer like the autorun function on CDR.

I’ll get a new computer next week and for setting it up I want to use NVDA. Because I don’t know which letter the USB drive would have, it might be more comfortable if NVDA would run itself after pluggin in the Drive. Would this be possible?

 

Regards and thanks

Christian

 


Re: How to start NVDA on an USB drive automatically

Gene
 

You can't do it for security reasons. Windows removed that ability many years ago to keep malware from running that might be on a thumb drive.

But you can run Narrator, use it to run NVDA, then unload Narrator. You can have both running and unload Narrator.

Gene

-----Original Message-----
From: Christian Ohrens
Sent: Tuesday, February 09, 2021 11:41 PM
To: nvda@nvda.groups.io
Subject: [nvda] How to start NVDA on an USB drive automatically



Hello all,

As the subject said: I’m looking for a possibility to let a portable version of NVDA run automatically when I insert an USB drive to my computer like the autorun function on CDR.

I’ll get a new computer next week and for setting it up I want to use NVDA. Because I don’t know which letter the USB drive would have, it might be more comfortable if NVDA would run itself after pluggin in the Drive. Would this be possible?



Regards and thanks

Christian


How to start NVDA on an USB drive automatically

Christian Ohrens
 

Hello all,

As the subject said: I’m looking for a possibility to let a portable version of NVDA run automatically when I insert an USB drive to my computer like the autorun function on CDR.

I’ll get a new computer next week and for setting it up I want to use NVDA. Because I don’t know which letter the USB drive would have, it might be more comfortable if NVDA would run itself after pluggin in the Drive. Would this be possible?

 

Regards and thanks

Christian

 


Re: Tech VB podcast: In-depth interview with NVDA contributor Joseph Lee

Darren Tomblin
 

Is there an RSS feed I couldn’t find it 

73,
Darren Tomblin KC9JJJ

On Feb 9, 2021, at 11:17 AM, Joseph Lee <joseph.lee22590@...> wrote:



Hi,

The podcast? The website I linked uses media player controls. The direct mp3 link is:

https://www.techvb.net/wp-content/uploads/audio-uploads/joseph-lee-interview.mp3

Cheers,

Joseph

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of ely.r@...
Sent: Tuesday, February 9, 2021 6:21 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Tech VB podcast: In-depth interview with NVDA contributor Joseph Lee

 

Joseph,

Any chance that you might record and post this?

Rick

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: Monday, February 8, 2021 8:28 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Tech VB podcast: In-depth interview with NVDA contributor Joseph Lee

 

Hi,

Apparently not. Let’s discuss this on NvDA-SPL, complete with steps to reproduce the issue.

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Robert Doc Wright godfearer
Sent: Monday, February 8, 2021 1:26 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Tech VB podcast: In-depth interview with NVDA contributor Joseph Lee

 

Joseph,did you get my post on the NVDA SPL list? I wrote asking about what I needed to change in the SPL addon to stop it from announcing the title of the upcoming track.

----- Original Message -----

From: Joseph Lee

Sent: Sunday, February 7, 2021 7:03 PM

Subject: [nvda] Tech VB podcast: In-depth interview with NVDA contributor Joseph Lee

 

Hello NVDA community,

As we await NVDA 2020.4, I figured the following podcast would be educational for many of you:

I sat down with Vytautus from Tech VB for an in-depth interview about NVDA, add-ons, accessibility advocacy and many topics. The resulting podcast (about two hours in length) is now available for your enjoyment:

In-depth interview with NVDA contributor Joseph Lee, We talked about Screen readers, Education, and everything else accessibility related – techvb.net

 

Thanks to Vytautus from Tech VB for inviting me for this interview, and of course, special shout-out to Nv Access people for making NVDA possible and add-on authors for opening up possibilities for thousands. If you have any questions, comments, or concerns, feel free to reach out to me privately (not on NVDA users group please).

Cheers,

Joseph


Re: Installing new nvda download

Marilyn and Don Bilderback
 

Brian, thanks so much for the instructions.  In the choices for when the nvda starts….both were checked.  Hummm.  We unchecked the second one since we are both using the same account.  While that didn’t change anything, we dug further.  Finally, I told my husband to try youtube to see if it played music.  It did not.  Sigh.  So we looked around and pressed the down arrow and it started to play.  I am not sure what exactly went wrong or who helped or if the computer got tired of dealing with us…but we are back in business.  Anyway, so far so good. 

 

My husband has eyes and I have way more knowledge than him and we collaborated for far too long and it was a wonder we are both still sane!  I know we must have installed NVDA the first time, but we surely had a better time of it than today’s fiasco.  I’m sure all of us know how hopeless it is when you can’t get any feedback and it is impossible to trouble shoot by yourself. It was a chore just to dictate the Email to the list. 

Thanks again. 

Marilyn

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian Vogel
Sent: Tuesday, February 9, 2021 4:31 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Installing new nvda download

 

You should be asked when installing NVDA for the first time (note: for the first time, not during an upgrade) whether you want it to start with Windows or not.

If you are trying to change NVDA already installed so that it does start either before logging in with Windows, or afterwards if there are multiple users on the machine, open NVDA Settings (NVDA+N,S) and the General pane should be open by default.  In that pane are two checkboxes:

1. Start NVDA after I sign-in
2. Use NVDA during sign-in (requires administrator privileges)

Presuming you're using a Windows 10 account with admin privileges, check whichever checkbox describes exactly when you want NVDA to start speaking.

--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

The depths of denial one can be pushed to by outside forces of disapproval can make you not even recognize yourself to yourself.

       ~ Brian Vogel

 


Re: Accessible Video Editor

 

On Tue, Feb 9, 2021 at 07:33 PM, William wrote:
Doing stuff like this through code,we donot have to deal with all those inaccessible or problematic gui issues.
-
One of the great tragedies of the rise of the GUIs was the virtual disappearance of understanding and use of command line interfaces (or certain interpreted code interfaces) by a large number of computer users.

There are really times when a CLI is vastly superior to a GUI for doing certain things.  And they're generally as close to 100% accessible as you can get.

I commend you for mentioning one of these options, as what you say is true whether one has sight or does not.
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

The depths of denial one can be pushed to by outside forces of disapproval can make you not even recognize yourself to yourself.

       ~ Brian Vogel

 


Re: Accessible Video Editor

William
 

Hi,

for those visually disabled like me would like to do some kind of video editing, like trimming and joining video,

please consider learning about moviepy, a python video and video editing library.

Doing stuff like this through code,we donot have to deal with all those inaccessible or problematic gui issues.

Provided I have very very basic understanding of python, I just learn about moviepy last night, and I can already trim and join video using just few lines of codes.


Luke Robinett 於 26/1/2021 6:16 寫道:

Hi Sarah,
Any idea why gluing video clips in reaper results in the image blacking out and if there’s a way to avoid this while still being able to glue? Personally I like having things in one big chunk when possible rather than multiple separate pieces. If that isn’t possible, can you explain in a little more detail the technique you described of positioning clips such that there are no visual gaps in playback? For example, if I navigate to the end of one clip and then paste another one, can I be assured sighted folks won’t see any artifacts from this? Thanks!

On Jan 23, 2021, at 10:59 AM, Sarah k Alawami <marrie12@...> wrote:



glue is reaper's merge. It is a nondistructive glue. but just put the items on one track, move them as necessary, I blend mine together so that there is no audible gap then render as mp4. It's almost as if I'm splicing tape, Yes, i did say tape!

--

Sarah Alawami, owner of TFFP. . For more info go to our website.

Check out my adventures with a shadow machine.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on twitch. Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 22 Jan 2021, at 22:03, Debbie April Yuille wrote:

What do you mean by gluing the videos together? Can’t you merge them?

 

Debbie

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sarah k Alawami
Sent: Saturday, 23 January 2021 7:04 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Accessible Video Editor

 

No, I edit videos in reaper all the time. I can do it as quickly as I can a sound file. Just don't glue the items together, or the video will be black.

--

Sarah Alawami, owner of TFFP. . For more info go to our website.

Check out my adventures with a shadow machine.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on twitch. Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.

Finally, to become a patron and help support the podcast go here

On 22 Jan 2021, at 11:37, Christian Ohrens wrote:

Hi,
I haven't used Reaper before so don't know much about this program, even it's for free or payed.
But what I read about was that Reaper's video editing function is rather slow, isn't it?

Greetings
Christian

 

Am 22.01.2021 20:22 schrieb Luke Robinett <blindgroupsluke@...>:

*bump*

I asked a similar question here a couple months ago and think it warrants further conversation. It seems an increasing number of us blind folks are interested in starting YouTube channels and doing other things with video video, so hopefully we learn about some good options.

I am also a home recording enthusiast and use a program called reaper to record and mix audio tracks. Reaper is fully accessible once you install a couple of free community created plug-ins. Reaper does provide the most basic of basic video editing. Pretty much just trimming, splitting, sliding things around on the timeline. No effects or transitions or anything else like that. If that’s all you need though, it’s 100% accessible and might be a good option.

 

On Jan 22, 2021, at 7:24 AM, Christian Ohrens <mail@...> wrote:



Hello,

 

Just want to refresh a thread of 2019 which I found in the group’s archive.

 

Are there any suggestions for accessible video editors?

Has anybody tried for example „vegas“ which is now developed by Magix Software? „Sound Forge“ is very accessible, maybe „Vegas“ would it be too?

Or the more professional programs like „Davinci“ or „Premiere“?

 

„Sound Forge“ is also able to edit video but I’m not quite sure if I would ‚destroy‘ the video itself when I’m gonna cut things off. If you want to edit the sound of the video it’s great.

 

Greets and thanks

Christian

 

 

---

 

Christian Ohrens

Freier Journalist, Videoblogger, DJ, Gästeführer

 

Am Stühm-Süd 23, 22175 Hamburg

+49 - (0) - 40 - 59 35 51 59 (Tel.)

+49 - (0) - 171 - 938 92 52 (Mob.)

E-Mail: mail@...

Web: https://christian-ohrens.de/

Twitter: https://twitter.com/CO1984--

 

 


locked Re: [SOLVED] Heavy problems with nvda_2020.4rc1 and Visual Studio 2019 latest

 

On Tue, Feb 9, 2021 at 07:14 PM, Luke Robinett wrote:
Brian, unbelievably condescending and unnecessary warning.
-
No, it's not.  And given the frequency with which this occurs (and not only with you, you just happened to be a part of this one) it's crystal clear the people do not bother to read through topics before replying. This isn't a "sometimes" or "every once in a while" there is a pattern, and it's a pattern I intend to actively quash, as it is against the groups stated rules.

This isn't, believe it or not, about you.  But I am not about to avoid giving general warnings when perfect examples of why they're needed have occurred.  This was one of those, and the reaction is entirely warranted.

And with this, this topic is locked, as the issue originally posed has been addressed.  If anyone wishes to discuss this further then the owner address is the correct mechanism.
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

The depths of denial one can be pushed to by outside forces of disapproval can make you not even recognize yourself to yourself.

       ~ Brian Vogel

 


locked Re: [SOLVED] Heavy problems with nvda_2020.4rc1 and Visual Studio 2019 latest

Luke Robinett <blindgroupsluke@...>
 

Brian, unbelievably condescending and unnecessary warning. Give people a break – sometimes messages don’t show up for everyone at the same time based on the connection, server lag etc. Maybe try giving people the benefit of the doubt and not throwing your weight around without any good reason. Nobody was harmed because a few messages rolled in after OP already said he solved his issue. Also, you are not blind. It’s easy for you to see all the messages in a thread quickly, I’d imagine. Those of us using screen readers need to go message by message and sometimes we miss things. If this response gets me banned, I guess that tells me a lot about you and the moderators of this site. I never get a single atta-boy for all the times I help folks out (not that I expect that) but the minute I trip over one of the many rules I get reprimanded like a child.

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian Vogel
Sent: Tuesday, February 9, 2021 2:48 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Heavy problems with nvda_2020.4rc1 and Visual Studio 2019 latest

 

Consider what follows a strong moderator warning.  There is a reason that the group rules "recommend" reading through an entire topic before replying; it's so everyone is up to speed.

Joseph Lee initially proposed turning on selective UIA event registration at 12:01 PM in message  

The original poster, Yeti, responded, "I just did it and it seems to fix my Problem.," at 1:14 PM, in message  

Yet we have had two messages, one "confirming the problem," which had already been resolved, and another reacting to that message, after the issue was already resolved successfully by the original reporter.

Please, people, do not post additional messages to any topic until and unless you've read through it, in its entirety, FIRST.  Joseph should not have to repeat the same solution because it was either not read or glossed over.  And we're not talking about an instance where those who followed-up were doing so as the solution was being offered.  These happened hours after the initial solution, and acknowledgement of same, were posted.  There's no excuse for this.
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

The depths of denial one can be pushed to by outside forces of disapproval can make you not even recognize yourself to yourself.

       ~ Brian Vogel

 


Re: Installing new nvda download

 

You should be asked when installing NVDA for the first time (note: for the first time, not during an upgrade) whether you want it to start with Windows or not.

If you are trying to change NVDA already installed so that it does start either before logging in with Windows, or afterwards if there are multiple users on the machine, open NVDA Settings (NVDA+N,S) and the General pane should be open by default.  In that pane are two checkboxes:

1. Start NVDA after I sign-in
2. Use NVDA during sign-in (requires administrator privileges)

Presuming you're using a Windows 10 account with admin privileges, check whichever checkbox describes exactly when you want NVDA to start speaking.

--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

The depths of denial one can be pushed to by outside forces of disapproval can make you not even recognize yourself to yourself.

       ~ Brian Vogel

 


Installing new nvda download

Marilyn and Don Bilderback
 

I NEED HELP BECAUSE I CAN NOT GET THE COMPUTER TO TALK

I NEED IT TO START WHEN EVER COMPUTER STARTS

I KNOW I INSTALLED THIS BEFORE BUT CAN NOT REMEMBER THE STEPS

 


locked Re: [SOLVED] Heavy problems with nvda_2020.4rc1 and Visual Studio 2019 latest

 

Consider what follows a strong moderator warning.  There is a reason that the group rules "recommend" reading through an entire topic before replying; it's so everyone is up to speed.

Joseph Lee initially proposed turning on selective UIA event registration at 12:01 PM in message  

The original poster, Yeti, responded, "I just did it and it seems to fix my Problem.," at 1:14 PM, in message  

Yet we have had two messages, one "confirming the problem," which had already been resolved, and another reacting to that message, after the issue was already resolved successfully by the original reporter.

Please, people, do not post additional messages to any topic until and unless you've read through it, in its entirety, FIRST.  Joseph should not have to repeat the same solution because it was either not read or glossed over.  And we're not talking about an instance where those who followed-up were doing so as the solution was being offered.  These happened hours after the initial solution, and acknowledgement of same, were posted.  There's no excuse for this.
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

The depths of denial one can be pushed to by outside forces of disapproval can make you not even recognize yourself to yourself.

       ~ Brian Vogel

 


locked Re: [SOLVED] Heavy problems with nvda_2020.4rc1 and Visual Studio 2019 latest

 

Hi,
Try with selective UIA event registration turned on and see if that makes a difference. This option was specifically designed for performance issues such as those from Visual Studio.
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Luke Robinett
Sent: Tuesday, February 9, 2021 12:56 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Heavy problems with nvda_2020.4rc1 and Visual Studio 2019 latest

Yikes! Thanks for the heads up. I basically wouldn’t be able to do my job if I couldn’t use visual studio. As it is, there are already a number of long-standing bugs I and others have reported on github that still have not been resolved. Endless back-and-forth but never a resolution. Anyway, that’s another story. Thanks for sharing this.

On Feb 9, 2021, at 12:06 PM, Jaffar Sidek <jaffar.sidek10@gmail.com> wrote:

Hi. I can confirm Yeti's NVDA 20.4 RC1 with Visual Studio 2019 not working issue. Cheers!

On 10/2/2021 12:47 am, Yeti wrote:
Hello List and Developers, I installed nvda_2020.4rc1 yesterday.
After that I couldn't work with VS2019 anymore.
Even switching between editor windows was no longer possible without
switching to another program or restarting NVDA. It was certainly
due to the RC1, as a change back to 2020.3 solved the problem. If
someone is interested in the problem, I'll be happy to reinstall the
RC1 and send logs.
gladly Contact via PM or Zoom

Best regards

Yeti








Re: Two Google Doc issues

Jonathan Milam
 

Thanks, Sylvie.  I appreciate it.

 

Jonathan

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Sylvie Duchateau
Sent: Tuesday, February 9, 2021 4:33 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Two Google Doc issues

 

Hello Jonathan and all,

I have no answer to your first question.

Regarding the second one, I have the same problem and the workaround I found is to press F6 twice.

After that, I can access the document options.

Best

Sylvie

De : nvda@nvda.groups.io <nvda@nvda.groups.io> De la part de Jonathan Milam via groups.io
Envoyé : vendredi 5 février 2021 20:09
À : nvda@nvda.groups.io
Objet : [nvda] Two Google Doc issues

 

Hi All,

 

For those who use Google docs, if I am reading the doc in browse mode, only the first page is shown in the browser, however, it shows completely if I am reading the document in Focus mode.  Has anyone else seen this?

 

Also, I am noticing that when a doc loads and Focus mode is automatically enabled, if I return to Browse mode, I am not seeing the sidebar items to rename, share, etc. that I used to see when using Browse mode that always used to be above the document.  The only work-around I have found is to press alt+shift+F and then shift+tab to get to these items.  I’m wondering if they have changed this behavior sometime last year to hide this?  These issues happen in Firefox or Chrome in Win10.

 

 Thanks,            

Jonathan

 


Re: No sound output in Reaper

Luke Robinett <blindgroupsluke@...>
 

Hey it’s Chris from RWP! Yeah, I would love if Opie would bring their question to that list where I think it could get the focus it deserves. It’s probably beyond the scope of the general NVDA list.

On Feb 9, 2021, at 8:10 AM, Chris Smart <ve3rwj@...> wrote:



Are you guys not on the RWP list?

https://groups.io/g/rwp


On 2021-02-09 11:08 a.m., Carlos Esteban Martínez Macías via groups.io wrote:

Hi all.

What is your version of Reaper_ I have Reaper 64 bit version 6.23 *feb4 2021(. And in the preferences dialog, devices, the combobox for devices is after of audio system. NVDA detect it because the system focus can found this element presing tab.

Regards.

 

 

Carlos Esteban Martínez Macías.

Soporte a usuarios, comunidad de NVDA en español.

Web www.nvda.es

Experto certificado en NVDA

 

De: Christian Ohrens
Enviado: martes, 9 de febrero de 2021 6:35
Para: nvda@nvda.groups.io
Asunto: [nvda] No sound output in Reaper

 

Hey there,

after some of you recommented to use Reaper, I now installed the latest version incl all Scripts.

But there’s nothing coming out over the speakers. There’s also no right possibility to select the sound device, only the selection if I want to use either Asio, WDM, Wasabi or whatever is shown to me in the options dialogue.

Any hints how to solve this issue?

 

Thanks in advance

 

Regards

Christian

 

 


--

Músico (pianista) y ayuda a usuarios ciegos y con discapacidad visual en el uso de lectores de pantalla y tecnología. Experto certificado en el lector de pantalla NVDA.

Musician (pianist) and help to the blind people and with visual disability in use of screen readers and technology. Certified expert in the screen reader NVDA.


locked Re: [SOLVED] Heavy problems with nvda_2020.4rc1 and Visual Studio 2019 latest

Luke Robinett <blindgroupsluke@...>
 

Yikes! Thanks for the heads up. I basically wouldn’t be able to do my job if I couldn’t use visual studio. As it is, there are already a number of long-standing bugs I and others have reported on github that still have not been resolved. Endless back-and-forth but never a resolution. Anyway, that’s another story. Thanks for sharing this.

On Feb 9, 2021, at 12:06 PM, Jaffar Sidek <jaffar.sidek10@gmail.com> wrote:

Hi. I can confirm Yeti's NVDA 20.4 RC1 with Visual Studio 2019 not working issue. Cheers!

On 10/2/2021 12:47 am, Yeti wrote:
Hello List and Developers, I installed nvda_2020.4rc1
yesterday. After that I couldn't work with VS2019 anymore.
Even switching between editor windows was no longer possible
without switching to another program or restarting NVDA. It
was certainly due to the RC1, as a change back to 2020.3
solved the problem. If someone is interested in the
problem, I'll be happy to reinstall the RC1 and send logs.
gladly Contact via PM or Zoom

Best regards

Yeti








locked Re: [SOLVED] Heavy problems with nvda_2020.4rc1 and Visual Studio 2019 latest

Jaffar Sidek <jaffar.sidek10@...>
 

Hi.  I can confirm Yeti's NVDA 20.4 RC1 with Visual Studio 2019 not working issue.  Cheers!

On 10/2/2021 12:47 am, Yeti wrote:
Hello List and Developers, I installed nvda_2020.4rc1
yesterday. After that I couldn't work with VS2019 anymore.
Even switching between editor windows was no longer possible
without switching to another program or restarting NVDA. It
was certainly due to the RC1, as a change back to 2020.3
solved the problem. If someone is interested in the
problem, I'll be happy to reinstall the RC1 and send logs.
gladly Contact via PM or Zoom

Best regards

Yeti





Re: Windows 10 App Essentials: frequently asked questions

 

On Tue, Feb 9, 2021 at 12:40 PM, Joseph Lee wrote:
As some of you may have noticed, Windows 10 App Essentials 21.02 is no longer compatible with Windows 10 feature updates earlier than Version 2004 (May 2020 Update).
-
And since Version 2004 has been officially declared "ready for broad deployment," anyone who's not already on it should update to it, or better yet, 20H2, since it's really just 2004 with a few minor additions/tweaks to it.

This can be done by:

1. Checking whether the Download and install link is being presented to you for the Feature Update in your Windows Update Pane under Settings, Update & Security.  If it is, activate the link.

2. Going to the Microsoft Windows 10 Download Page and using the Update Assistant, which means simply activating the Update Now button.

3. Following these instructions:  Doing a Windows 10 Repair Install or Feature Update Using the Windows 10 ISO file


If your system is on 1909 or earlier, a declaration from Microsoft that a more recent Windows 10 Version is "ready for broad deployment" means that it's likely that your Windows Update is malfunctioning if you've not already got the Download and Install link and that you should manually update as a result.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

The depths of denial one can be pushed to by outside forces of disapproval can make you not even recognize yourself to yourself.

       ~ Brian Vogel

 


locked Re: [SOLVED] Heavy problems with nvda_2020.4rc1 and Visual Studio 2019 latest

Yeti
 

Hi Joseph,

have you considered enabling selective UIA event registration?
I just did it and it seams to fix my Problem.

Of course, I won't see what it's really worth until tomorrow, when I really work with it. For the moment, the RC1 seems to run more smoothly with this setting than the stable 2020.3 did.

Many thanks for the quick help.

Ad Astra

Yeti


locked Re: [SOLVED] Heavy problems with nvda_2020.4rc1 and Visual Studio 2019 latest

 

On Tue, Feb 9, 2021 at 12:52 PM, Yeti wrote:
But to work I need the stable version.
-
The thing being, that if the suggestion works, then the problem is gone.  It's not instability, it's a settings tweak.

Any release candidate will become the released version unless a show stopping bug of some sort is found that must be fixed.  You may have found one, but you may not have, either.
 
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

The depths of denial one can be pushed to by outside forces of disapproval can make you not even recognize yourself to yourself.

       ~ Brian Vogel

 

2241 - 2260 of 83834