Date   

nvda program to read when there are numbers

marinos.poulimas
 

Hello everyone I am writing with Google translate I am from Greece question how can I set the nvda program to read when there are numbers in this way as it is here 10000 does not help me to listen to them when it pronounces them as it is now and does it as it is here 1 . 0000


Re: NVDA running on a budget laptop

Gene
 

I don’t know why.  As I recall, another person reported a good experience with the machine.  If I am wrong, I hope a correction will be made.  If there were two different reports, I don’t know what accounts for the difference.
 
Gene

-----Original Message-----
Sent: Tuesday, May 18, 2021 4:07 PM
Subject: Re: [nvda] NVDA running on a budget laptop
 
I used it for very basic tasks email and not much more. it still choked!
I am not sure think vocaliser was used,   and espeak and still choked.

On 16/05/2021 22:22, Gene wrote:
> Too slow for what and what were you using for a synthesizer?  If you
> were using computer intensive voices as opposed to something like
> Eloquence or E-speak, the machine may have been unresponsive to the
> point of annoyance. If you were using Eloquence or E-speak, it may not
> have been.  I’m not saying anything about the machine; I have no opinion
> of it.  But I think that if people make such comments, they should state
> what they used the machine for and what synthesizer they were using with
> which screen-reader.
> Gene
> -----Original Message-----
> *From:* Kevin Cussick via groups.io
> <mailto:the.big.white.shepherd@...>
> *Sent:* Sunday, May 16, 2021 3:43 PM
> *To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
> *Subject:* Re: [nvda] NVDA running on a budget laptop
> I had this machine and threw it in the bin!   just to slow.
>
> On 16/05/2021 01:46, Monte Single wrote:
>  > If you could even move up to a low end icore 3 or 5 processor,  the
>  > difference would be noticeable.
>  >
>  > In a machine like you describe, and if I had only one choice, I would
>  > go for a better processor instead of more ram.
>  >
>  > *From:*nvda@nvda.groups.io <nvda@nvda.groups.io> *On Behalf Of *Jeff
> Samco
>  > *Sent:* May 15, 2021 6:20 PM
>  > *To:* nvda@nvda.groups.io
>  > *Subject:* [nvda] NVDA running on a budget laptop
>  >
>  > I am looking to purchase a second, low cost and compact laptop for some
>  > upcoming travelling. I only expect to be running NVDA, basic web
>  > browsing, email using MS Outlook and simple word processing. I don't
>  > know how much MVDA uses in terms of processing resources and would like
>  > some advice. I am considering the following laptop:
>  >
>  > HP Stream Pro 11 G5, Celeron N4000 / 1.1 GHz, Windows 10 Pro 64-bit
>  > National Academic, 4 GB RAM, 128 GB EMMC, 11.6" Display 1366 X 768 (HD),
>  > UHD Graphics 600, Wi-Fi, Bluetooth - Kbd: US - 5VD62UT#ABA
>  >
>  > Does anyone know if this configuration will perform well enough or
>  > should I move up to another level of processor?
>  > Thanks for any input.
>  > Jeff
>  >
>  >
>
>
>
>
>





Re: NVDA running on a budget laptop

Kevin Cussick
 

it does not have SSD. it is some sort of built in solid state drive You can not swap it out. so yes I suppose it is not a SATA drive butt not the SSD I am thinking about anyway I have said all I am going to say on this machine.

On 16/05/2021 22:40, David Moore wrote:
I only use Eliquence and eSpeak! With NVDA and Zoom, runs like a top, the HP Stream has an SSD drive!
On Sun, May 16, 2021, 5:22 PM Gene <gsasner@gmail.com <mailto:gsasner@gmail.com>> wrote:
Too slow for what and what were you using for a synthesizer?  If you
were using computer intensive voices as opposed to something like
Eloquence or E-speak, the machine may have been unresponsive to the
point of annoyance. If you were using Eloquence or E-speak, it may
not have been.  I’m not saying anything about the machine; I have no
opinion of it.  But I think that if people make such comments, they
should state what they used the machine for and what synthesizer
they were using with which screen-reader.
Gene
-----Original Message-----
*From:* Kevin Cussick via groups.io
<mailto:the.big.white.shepherd=googlemail.com@groups.io>
*Sent:* Sunday, May 16, 2021 3:43 PM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* Re: [nvda] NVDA running on a budget laptop
I had this machine and threw it in the bin!   just to slow.
On 16/05/2021 01:46, Monte Single wrote:
> If you could even move up to a low end icore 3 or 5 processor,  the
> difference would be noticeable.
>
> In a machine like you describe, and if I had only one choice, I
would
> go for a better processor instead of more ram.
>
> *From:*nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
<nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>> *On Behalf Of
*Jeff Samco
> *Sent:* May 15, 2021 6:20 PM
> *To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
> *Subject:* [nvda] NVDA running on a budget laptop
>
> I am looking to purchase a second, low cost and compact laptop
for some
> upcoming travelling. I only expect to be running NVDA, basic web
> browsing, email using MS Outlook and simple word processing. I don't
> know how much MVDA uses in terms of processing resources and
would like
> some advice. I am considering the following laptop:
>
> HP Stream Pro 11 G5, Celeron N4000 / 1.1 GHz, Windows 10 Pro 64-bit
> National Academic, 4 GB RAM, 128 GB EMMC, 11.6" Display 1366 X
768 (HD),
> UHD Graphics 600, Wi-Fi, Bluetooth - Kbd: US - 5VD62UT#ABA
>
> Does anyone know if this configuration will perform well enough or
> should I move up to another level of processor?
> Thanks for any input.
> Jeff
>
>


Re: NVDA running on a budget laptop

Kevin Cussick
 

I used it for very basic tasks email and not much more. it still choked! I am not sure think vocaliser was used, and espeak and still choked.

On 16/05/2021 22:22, Gene wrote:
Too slow for what and what were you using for a synthesizer?  If you were using computer intensive voices as opposed to something like Eloquence or E-speak, the machine may have been unresponsive to the point of annoyance. If you were using Eloquence or E-speak, it may not have been.  I’m not saying anything about the machine; I have no opinion of it.  But I think that if people make such comments, they should state what they used the machine for and what synthesizer they were using with which screen-reader.
Gene
-----Original Message-----
*From:* Kevin Cussick via groups.io <mailto:the.big.white.shepherd=googlemail.com@groups.io>
*Sent:* Sunday, May 16, 2021 3:43 PM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* Re: [nvda] NVDA running on a budget laptop
I had this machine and threw it in the bin!   just to slow.
On 16/05/2021 01:46, Monte Single wrote:
> If you could even move up to a low end icore 3 or 5 processor,  the
> difference would be noticeable.
>
> In a machine like you describe, and if I had only one choice, I would
> go for a better processor instead of more ram.
>
> *From:*nvda@nvda.groups.io <nvda@nvda.groups.io> *On Behalf Of *Jeff
Samco
> *Sent:* May 15, 2021 6:20 PM
> *To:* nvda@nvda.groups.io
> *Subject:* [nvda] NVDA running on a budget laptop
>
> I am looking to purchase a second, low cost and compact laptop for some
> upcoming travelling. I only expect to be running NVDA, basic web
> browsing, email using MS Outlook and simple word processing. I don't
> know how much MVDA uses in terms of processing resources and would like
> some advice. I am considering the following laptop:
>
> HP Stream Pro 11 G5, Celeron N4000 / 1.1 GHz, Windows 10 Pro 64-bit
> National Academic, 4 GB RAM, 128 GB EMMC, 11.6" Display 1366 X 768 (HD),
> UHD Graphics 600, Wi-Fi, Bluetooth - Kbd: US - 5VD62UT#ABA
>
> Does anyone know if this configuration will perform well enough or
> should I move up to another level of processor?
> Thanks for any input.
> Jeff
>
>


weird issue with windows 21h1

 

Hi.

Well today I decided to install the latest windows feature update.

I checked for updates.

It loaded everything fine.

I then went to install the feature update.

I got error 0x08000fff immediately which was strange.

The update however did install without a problem.

On restart though I get a please wait from windows update sfc and dizm havn't done much but its not like its all dead, the system works.

I tried uninstalling, restoring and trying again.

Same thing, I tried on my asus desktop which had the update, it didn't happen and everything worked as expected.

In the short to medium term even long term its not bad, I have latest drivers for my display and chipset, as well as audio according to hp which is realtech.

The update and restart and update and shutdown boxes exist, but its not like the system aint going to run.

As long as I can install updates manually I guess it will be ok.

One thing's for sure though I will hold off on updating my media backups, those are 20h2 or 2004 and probably I don't need to bother updating them I guess.

Not ssure what I will do.

One thing I will not do is ring microsoft tech support.

To many bad memmories.

The system works, it boots and its not broken.


Can NVDA be used on a PC with two monitors?

Richard B. McDonald
 

Hi!

 

I will be using NVDA 2020.4 on a Windows 10 PC that has two monitors.  Can NVDA be used on this PC?  Is there somewhere I can read about using NVDA with two monitors?

 

Thanks!

Richard


Re: Is "Sophos antivirus" accessible with NVDA?

Richard B. McDonald
 

Hi Brian!

 

I agree with you about the goodness of Windows Defender, and the not-so-great goodness of Sophos.  However, this is not a “choice” thing but rather a corporate requirement as regards HIPAA.

 

Thanks,

Richard

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian Vogel
Sent: Tuesday, May 18, 2021 9:01 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Is "Sophos antivirus" accessible with NVDA?

 

First, I am not questioning anyone's product choices.

That being said, what is it that you're trying to protect?  If it's just your PC, then I'd suggest you have a look at what the independent antivirus and security suite testing labs are saying about how products are performing.  Windows Defender, which comes with Windows 10, has consistently been in the top tier of products for years now, since it's major overhaul around the time Windows 8 came out.  And it's quite accessible.

Look at the most recent testing results from the following antivirus/security testing labs, along with the historical results from the past several years if you want to see how Windows Security/Defender has been performing.  Windows Security has been solidly in the top 10, often top 5, and frequently beats out several well-known competitors that one must pay for.

AV Test

AV Comparatives

SE Labs  (Reports Page)

MRG Effitas  (360 Protection Testing Category)

Looking at these reports will also give you an idea of how the other products are performing, and if you look at several reporting cycles, you'll also see that "being number one" really doesn't matter because the top products constantly change ranking depending on the samples used for testing in any given cycle.  The differences in real-world protection between number one and number ten on most of these rankings is insignificant to your average user, and what was number one in one cycle can fall to number six in the next, and vice versa.

--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

Always remember others may hate you but those who hate you don't win unless you hate them.  And then you destroy yourself.

       ~ Richard M. Nixon

 


Re: PROBLEM FIXED Re: office 2019 and outlook

Timothy VD Berg
 

Hi

Thanks a lot for the advice it work.

Thanks

Timothy

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Milton Charlton
Sent: Tuesday, 18 May 2021 18:34
To: nvda@nvda.groups.io
Subject: [nvda] PROBLEM FIXED Re: office 2019 and outlook

 

 I just got an Office update that fixed the problem of Narrator or NVDA not announcing the autocomplete or autofill choices.  It works well now.  Up down arrow keys move between choices.  Hit return to select the one you want and enter it in the TO: space.

 

This new version is 2104 build 13929.20386 . 
To find version: FILE > Office Account   then see version at About Outlook in lower right.

While at Office Account click on Office Update > Update Options menu > click top item which is Update Now.  That is what I did just now. 


Re: Accessible disk partition, cloning, imaging software

Bob Cavanaugh <cavbob1993@...>
 

I'm not sure about the rest of what you want, but the disk management
tool built into Windows works well for managing partitions.

On 5/18/21, Bartek <infosieciowe@gmail.com> wrote:
Hello,

I know that the topic has already been discussed, but I have a problem with
viewing the archive.

I am looking for an accessible software for partitioning, cloning,
migrating, disk imaging.
Nice as free for home use or opensource.can be operated from the command
line,

Can you suggest something? Do you have any patents?

Macrium Reflect works great, but its accessiblity is not good.

Bartek






Regarding issues that get solved, please do the following #adminnotice

 

Hello All,

           I ask that those who are working on a given issue, in a given topic, who find a solution NOT create a separate topic with "[Solved]," or "[Fixed]," or similar stuck in front of the original topic.   Doing so splits the solution into a separate topic from the discussion about the very problem it solves, and very often that makes the question, "The solution to what?," come up, particularly when the solution makes no direct reference to the issue that was being discussed (and that has happened way more than once).

            Please post your solution to the original topic.  For those who would like a "[Solved]" signifier, I would be very happy to put one in on the topic if you e-mail the owner address asking for one and identifying the topic where you've posted a solution.  That way the entire discussion of a given issue, and its solution, stay in one tidy topic rather than being split from each other.

             Thanks for your consideration.
--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

Always remember others may hate you but those who hate you don't win unless you hate them.  And then you destroy yourself.

       ~ Richard M. Nixon

 


[Solved] office 2019 and outlook

Milton Charlton
 

I just got an Office update that fixed the problem of Narrator or NVDA not announcing the autocomplete or autofill choices.  It works well now.  Up down arrow keys move between choices.  Hit return to select the one you want and enter it in the TO: space.

 

This version is 2104 build 13929.20386 .
To find version :
FILE > Office Account then see version at About Outlook in lower right.

 While at Office Account click on Office Update > Update Options menu > click top item which is Update Now.  That is what I did just now. 


Re: Is "Sophos antivirus" accessible with NVDA?

 

First, I am not questioning anyone's product choices.

That being said, what is it that you're trying to protect?  If it's just your PC, then I'd suggest you have a look at what the independent antivirus and security suite testing labs are saying about how products are performing.  Windows Defender, which comes with Windows 10, has consistently been in the top tier of products for years now, since it's major overhaul around the time Windows 8 came out.  And it's quite accessible.

Look at the most recent testing results from the following antivirus/security testing labs, along with the historical results from the past several years if you want to see how Windows Security/Defender has been performing.  Windows Security has been solidly in the top 10, often top 5, and frequently beats out several well-known competitors that one must pay for.

AV Test

AV Comparatives

SE Labs  (Reports Page)

MRG Effitas  (360 Protection Testing Category)

Looking at these reports will also give you an idea of how the other products are performing, and if you look at several reporting cycles, you'll also see that "being number one" really doesn't matter because the top products constantly change ranking depending on the samples used for testing in any given cycle.  The differences in real-world protection between number one and number ten on most of these rankings is insignificant to your average user, and what was number one in one cycle can fall to number six in the next, and vice versa.

--

Brian - Windows 10 Pro, 64-Bit, Version 20H2, Build 19042  

Always remember others may hate you but those who hate you don't win unless you hate them.  And then you destroy yourself.

       ~ Richard M. Nixon

 


Re: Is "Sophos antivirus" accessible with NVDA?

Thomas N. Chan
 

Sophos is accessible from the web  interface, quite unuseable on the application itself. you can do full scan from the appliction itself.
but once you set it up on the web interface,  you basically can let it do its job.
you can set up schedule scan, tell it what to do if it detect a threat, and exclude files or folder.
it will email you if it detects things, fail to update, didn't meet policy and so on.
for the price you pay, you get more device protected.

the other one i recommend is call vipre advance security

Regards,
Thomas N. Chan


On Tue, May 18, 2021 at 8:05 AM Nimer Jaber <nimerjaber1@...> wrote:
Hello,

Because Sophos can be controlled, for the most part, using the website, it is more accessible than most antivirus products on the market. The dashboard within the Sophos app is not, but the web interface is, and you can do pretty much whatever you wish to using that web interface.

Thanks.

On Mon, May 17, 2021 at 3:48 PM Richard B. McDonald <richardbmcdonald@...> wrote:

Hi!

 

I am using NVDA 2020.4 and Windows 10, all updated.  Is “Sophos antivirus” accessible with NVDA?

 

Thanks,

Richard



--
Best,

Nimer Jaber

The message above is intended for the recipient to whom it was
addressed. If you believe that you are not the intended recipient,
please notify me via reply email and destroy all copies of this
correspondence. Action taken as a result of this email or its contents
by anyone other than the intended recipient(s) may result in civil or
criminal charges. I have checked this email and all corresponding
attachments for security threats.

Registered Linux User 529141.
http://counter.li.org/

To find out about a free, open-source, and versatile screen reader for Windows, visit nvaccess.org

You can follow @nimerjaber on Twitter for the latest technology news.

To contact me, you can reply to this email or you may call me at (970) (393-4481) and I will do my best to respond to you promptly.

Thank you, and have a great day!


Accessible disk partition, cloning, imaging software

Bartek
 

Hello,

I know that the topic has already been discussed, but I have a problem with viewing the archive.

I am looking for an accessible software for partitioning, cloning, migrating, disk imaging.
Nice as free for home use or opensource.can be operated from the command line,

Can you suggest something? Do you have any patents?

Macrium Reflect works great, but its accessiblity is not good.

Bartek


How to use NVDA to navigate and use text boxes inserted in MS Word

Rowen Cary
 

Hello Everyone,

I want to know how NVDA should interact with the text box in Word. If you want to insert a text box, you can open the Word document and press Alt + N, X in turn.
Is there any information to indicate this?
Sorry, I can't access the text box well using UIA and non-UIA.
However, many resume templates use it, and we should be able to interact with it easily.

Thanks.


Re: Improving accessibility of Spotify for desktop

Gene
 

To clarify, I don’t mean they sold their solutions in any relationship with Spotify.  There were completely independent and Spotify had no interest in the solutions. 
 
Gene

-----Original Message-----
Sent: Tuesday, May 18, 2021 6:06 AM
Subject: Re: [nvda] Improving accessibility of Spotify for desktop
 
Have things changed?  A number of years ago, Spotify’s position was that accessibility wasn’t their responsibility.  One or two blind developers created accessibility solutions they sold for Spotify.  Spotify did become more accessible when they released an entirely redesigned interface, but that was unintended and coincidental improvement. 
 
If their position has changed, that would be good to know.  If it hasn’t, I doubt that having a little more clamor on the community site will make any difference.  The community site is where users discuss things.  A few more blind people talking about accessibility isn’t going to convince management of anything. 
 
Gene
-----Original Message-----
From: Marco Oros
Sent: Tuesday, May 18, 2021 5:47 AM
Subject: Re: [nvda] Improving accessibility of Spotify for desktop
 

Hi people, I am back in this thread.

After new update, Spotify's playlist view in Your library is accessed very well.

Also, I need some people, some blind users, who will register in Spotify community and vote for My accessible ideas for Spotify, or create another ideas to vote for. There are not many votes to get It to Spotify. I will be happy, if Spotify will be more accessible for the blind, like It is.

Dňa 7. 5. 2021 o 0:08 Marco Oros via groups.io napísal(a):

I know about It, but I have for example problem with playlist view.

Also, in My computer this interface is actually default.

Playlists are viewed in left, but not at 'Your library' section.

 

Dňa 6. 5. 2021 o 23:57 Sarah k Alawami napísal(a):

They already have a layout you can get ot that is fully accessible. I forgot how to do it but you need to edit a CFG file. My BF told me about it and I've seen him use it with no issues. I've been using spotify since 2017 in electron mode and it is grate.

--

Sarah Alawami, owner of TFFP. . For more info go to our website.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on twitch. Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.
Finally, you can support my work on happs, the network of now.

On 6 May 2021, at 10:06, Marco Oros wrote:

Hello.

I don't know, where to post It. I'll try to post It here.

Maybe You know about Spotify. New interface is better accessible, than this previous. I think to Spotify for desktop. Sometimes NVDA don't read everything on Spotify, for example playlist view in 'Your library' ETC. Similar thing is with moving playlists to folders, althought with new interface Spotify's accessibility is better.

I don't know, how to programm, but please somebody make Spotify for desktop accessible with NVDA. It is very good software.

Thank You.

best regards

Marco Oros


Re: Improving accessibility of Spotify for desktop

Gene
 

Have things changed?  A number of years ago, Spotify’s position was that accessibility wasn’t their responsibility.  One or two blind developers created accessibility solutions they sold for Spotify.  Spotify did become more accessible when they released an entirely redesigned interface, but that was unintended and coincidental improvement. 
 
If their position has changed, that would be good to know.  If it hasn’t, I doubt that having a little more clamor on the community site will make any difference.  The community site is where users discuss things.  A few more blind people talking about accessibility isn’t going to convince management of anything. 
 
Gene

-----Original Message-----
From: Marco Oros
Sent: Tuesday, May 18, 2021 5:47 AM
Subject: Re: [nvda] Improving accessibility of Spotify for desktop
 

Hi people, I am back in this thread.

After new update, Spotify's playlist view in Your library is accessed very well.

Also, I need some people, some blind users, who will register in Spotify community and vote for My accessible ideas for Spotify, or create another ideas to vote for. There are not many votes to get It to Spotify. I will be happy, if Spotify will be more accessible for the blind, like It is.

Dňa 7. 5. 2021 o 0:08 Marco Oros via groups.io napísal(a):

I know about It, but I have for example problem with playlist view.

Also, in My computer this interface is actually default.

Playlists are viewed in left, but not at 'Your library' section.

 

Dňa 6. 5. 2021 o 23:57 Sarah k Alawami napísal(a):

They already have a layout you can get ot that is fully accessible. I forgot how to do it but you need to edit a CFG file. My BF told me about it and I've seen him use it with no issues. I've been using spotify since 2017 in electron mode and it is grate.

--

Sarah Alawami, owner of TFFP. . For more info go to our website.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on twitch. Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.
Finally, you can support my work on happs, the network of now.

On 6 May 2021, at 10:06, Marco Oros wrote:

Hello.

I don't know, where to post It. I'll try to post It here.

Maybe You know about Spotify. New interface is better accessible, than this previous. I think to Spotify for desktop. Sometimes NVDA don't read everything on Spotify, for example playlist view in 'Your library' ETC. Similar thing is with moving playlists to folders, althought with new interface Spotify's accessibility is better.

I don't know, how to programm, but please somebody make Spotify for desktop accessible with NVDA. It is very good software.

Thank You.

best regards

Marco Oros


Re: Improving accessibility of Spotify for desktop

Marco Oros
 

Hi people, I am back in this thread.

After new update, Spotify's playlist view in Your library is accessed very well.

Also, I need some people, some blind users, who will register in Spotify community and vote for My accessible ideas for Spotify, or create another ideas to vote for. There are not many votes to get It to Spotify. I will be happy, if Spotify will be more accessible for the blind, like It is.

Dňa 7. 5. 2021 o 0:08 Marco Oros via groups.io napísal(a):

I know about It, but I have for example problem with playlist view.

Also, in My computer this interface is actually default.

Playlists are viewed in left, but not at 'Your library' section.


Dňa 6. 5. 2021 o 23:57 Sarah k Alawami napísal(a):

They already have a layout you can get ot that is fully accessible. I forgot how to do it but you need to edit a CFG file. My BF told me about it and I've seen him use it with no issues. I've been using spotify since 2017 in electron mode and it is grate.

--

Sarah Alawami, owner of TFFP. . For more info go to our website.

to subscribe to the feed click here and you can also follow us on twitter

Our discord is where you will know when we go live on twitch. Feel free to give the channel a follow and see what is up there.

For stream archives, products you can buy and more visit my main lbry page and my tffp lbry page You will also be able to buy some of my products and eBooks there.
Finally, you can support my work on happs, the network of now.

On 6 May 2021, at 10:06, Marco Oros wrote:

Hello.

I don't know, where to post It. I'll try to post It here.

Maybe You know about Spotify. New interface is better accessible, than this previous. I think to Spotify for desktop. Sometimes NVDA don't read everything on Spotify, for example playlist view in 'Your library' ETC. Similar thing is with moving playlists to folders, althought with new interface Spotify's accessibility is better.

I don't know, how to programm, but please somebody make Spotify for desktop accessible with NVDA. It is very good software.

Thank You.

best regards

Marco Oros


Re: NVDA running on a budget laptop

Luke Davis
 

On May 16, tim wrote:

you can find computers with 1tb ssd all day on amizon and newegg.
And Woot.com and groupon.com.

Even if you have to get a system with spinning drives cheep. You can get a 1tb ssd drive for under $70 at both of the above places. And just install it there not that hard.
Actually, in some HP Streams (I do not say all, because I do not know) it can be very hard. And can require replacing, for example, the WIFI card with the drive (M2 II format), and then using a USB based WIFI adapter.

I speak from experience of trying to upgrade the SSD on a Stream.

So if you are thinking of upgrading one, google for the experience others have had doing the same upgrade to that exact model number.

Now, I will confess, that this was a Stream X360, so it was starting out behind the curve to begin with, and I probably shouldn't blame the whole line. However, HP never should have sold some of those early streams; and that made me doubt the integrity of the line as a whole.
My experience with Streams was enough to say never again, even if later models improve.
There are too many better options.

All that said, the last time I worked on it, it ran NVDA with eSpeak just fine along with OpenOffice, real office, etc.

Luke


Re: Is "Sophos antivirus" accessible with NVDA?

Nimer Jaber
 

Hello,

Because Sophos can be controlled, for the most part, using the website, it is more accessible than most antivirus products on the market. The dashboard within the Sophos app is not, but the web interface is, and you can do pretty much whatever you wish to using that web interface.

Thanks.

On Mon, May 17, 2021 at 3:48 PM Richard B. McDonald <richardbmcdonald@...> wrote:

Hi!

 

I am using NVDA 2020.4 and Windows 10, all updated.  Is “Sophos antivirus” accessible with NVDA?

 

Thanks,

Richard



--
Best,

Nimer Jaber

The message above is intended for the recipient to whom it was
addressed. If you believe that you are not the intended recipient,
please notify me via reply email and destroy all copies of this
correspondence. Action taken as a result of this email or its contents
by anyone other than the intended recipient(s) may result in civil or
criminal charges. I have checked this email and all corresponding
attachments for security threats.

Registered Linux User 529141.
http://counter.li.org/

To find out about a free, open-source, and versatile screen reader for Windows, visit nvaccess.org

You can follow @nimerjaber on Twitter for the latest technology news.

To contact me, you can reply to this email or you may call me at (970) (393-4481) and I will do my best to respond to you promptly.

Thank you, and have a great day!

4861 - 4880 of 88843