1. nvda@nvda.groups.io
  2. Messages
   Date   
Code Factory Voices no longer working?

Clement Chou
 

Woke up this morning to find Code Factory voices asking me to re-enter
my registration or activate a trial... and when I clicked try just to
see what happens it says there was an issue activating my license and
to make sure I had a working internet connection. Anyone know what the
deal with this is? Also seem to have somehow misplaced my registration
info, so need to figure out how to find it. thanks.
Re: Looking for secure FTP client accessible with NVDA

Shaun Everiss
 

Well I use flashfxp www.flashfxp.com.

Its by inicom but its not been updated in ages.

There are some querks and such to get about such as some folder views going away after os updates.

This can all be fixed by immediately making a backup after you have all settings and stuff set, and saving it to the cloud then restoring the settings part so as long as you have a non corrupted one it will work.


On 11/08/2021 6:32 am, Dennis Clark wrote:
Hello Everyone
Can anyone suggest a secure FTP client which works well with NVDA? Filezilla has been suggested by my sighted colleagues but I would prefer getting suggestions from those actually using the software with NVDA. Thanks for your assistance.
Dennis

Re: Looking for secure FTP client accessible with NVDA

Jackie
 

So does WinSCP.

On 8/10/21, Roger Stewart <paganus2@...> wrote:
I've been using FilZilla for many years. It works very well with nvda
and other screen readers.

Roger










On 8/10/2021 1:32 PM, Dennis Clark wrote:
Hello Everyone
Can anyone suggest a secure FTP client which works well with NVDA?
Filezilla has been suggested by my sighted colleagues but I would
prefer getting suggestions from those actually using the software with
NVDA. Thanks for your assistance.
Dennis






--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@... with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com
Re: nvda not announcing command description

Curtis Delzer
 

turn on tool tips, under object presentation, and others in that category of settings.

On 8/10/2021 4:05 AM, mukesh jain wrote:
hello,
I am using NVDA 2021 with window 10 on my laptop. I am facing the
difficulties when I use any command NVDA not announcing any command
description associated with it. say for instance, if i press
insert+tab to check any focussed item, it only announces the name of
the focus item but its not announcing the command description or help
tip associated with it. for example, it should say that to move to
item press the arrow keys to edit the item press f2. the same thing
is happening in Microsoft w
ord, whenever i am bringing my focus on any ribbons, its only
announcing the focused ribbon, but its not announcing the command
description like to move between the ribbons press the left or right
arrow keys to navigate in the ribbon press the tab or shift+tab keys.
NVDA used to announce the same in the earlier version. so is this
feature is missing in the latest version of NVDA or do i have to make
any seetings to make it announce?
thanks,
Mukesh
--
Curtis Delzer
HS
K 6 V F O
Rialto, CA

curtis@...
Re: Looking for secure FTP client accessible with NVDA

Roger Stewart
 

I've been using FilZilla for many years. It works very well with nvda and other screen readers.

Roger










On 8/10/2021 1:32 PM, Dennis Clark wrote:
Hello Everyone
Can anyone suggest a secure FTP client which works well with NVDA? Filezilla has been suggested by my sighted colleagues but I would prefer getting suggestions from those actually using the software with NVDA. Thanks for your assistance.
Dennis


Re: Looking for secure FTP client accessible with NVDA

Rui Fontes
 

Filezilla works alright with NVDA.


Rui Fontes


Às 19:32 de 10/08/2021, Dennis Clark escreveu:

Hello Everyone
Can anyone suggest a secure FTP client which works well with NVDA? Filezilla has been suggested by my sighted colleagues but I would prefer getting suggestions from those actually using the software with NVDA. Thanks for your assistance.
Dennis

Looking for secure FTP client accessible with NVDA

Dennis Clark
 

Hello Everyone
Can anyone suggest a secure FTP client which works well with NVDA? Filezilla has been suggested by my sighted colleagues but I would prefer getting suggestions from those actually using the software with NVDA. Thanks for your assistance.
Dennis
Re: nvda not announcing command description

Gene
 

Open the objject Presentation dialog, control NVDA key o.  the setting is in that dialog and is controled by a check box.
If you open the dialog in this way, you are on tooltips without moving.  It’s the first field in the dialog.  If you let all information read, you will hear the field announced.
 
It may be inconvenient to use NVDA key control o.  You can open the NVDA menu, down arrow to preferences, press enter, down arrow to object presentation and tab.  You are moving through the same part of the dialog and the first time you tabb you will be on tool tips. 
 
You may want to see how things change if you turn tooltips on, but doing so will change nothing as far as how ribbons are read, nor the information messages you hear as you move about what various controls do.
 
Gene
-----Original Message-----

Sent: Tuesday, August 10, 2021 12:39 PM
Subject: Re: [nvda] nvda not announcing command description
 
Hi

Can you please explain how to turn on tool tips in settings?
Thanks in advance

Anthony

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of tim
Sent: 10 August 2021 16:19
To: nvda@nvda.groups.io
Subject: Re: [nvda] nvda not announcing command description

For that action you need to turn on tool tips in setting, object presentation. Then it will speak help for those items.

On 8/10/2021 7:05 AM, mukesh jain wrote:
> hello,
> I am using NVDA 2021 with window 10 on my laptop. I am facing the
> difficulties when I use any command NVDA not announcing any command
> description associated with it. say for instance, if i press
> insert+tab to check any focussed item, it only announces the name of
> the focus item but its not announcing the command description or help
> tip associated with it. for example, it should say that to move to
> item press the arrow keys to edit the item press f2.  the same thing
> is happening in Microsoft w ord, whenever i am bringing my focus on
> any ribbons, its only announcing the focused ribbon, but its not
> announcing the command description like to move between the ribbons
> press the left or right arrow keys to navigate in the ribbon press the
> tab or shift+tab keys.
> NVDA used to announce the same in the earlier version. so is this
> feature is missing in the latest version of NVDA or do i have to make
> any seetings to make it announce?
> thanks,
> Mukesh
>
>
>
>
>
Re: nvda not announcing command description

anthony borg
 

Hi

Can you please explain how to turn on tool tips in settings?
Thanks in advance

Anthony

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of tim
Sent: 10 August 2021 16:19
To: nvda@nvda.groups.io
Subject: Re: [nvda] nvda not announcing command description

For that action you need to turn on tool tips in setting, object presentation. Then it will speak help for those items.

On 8/10/2021 7:05 AM, mukesh jain wrote:
hello,
I am using NVDA 2021 with window 10 on my laptop. I am facing the
difficulties when I use any command NVDA not announcing any command
description associated with it. say for instance, if i press
insert+tab to check any focussed item, it only announces the name of
the focus item but its not announcing the command description or help
tip associated with it. for example, it should say that to move to
item press the arrow keys to edit the item press f2. the same thing
is happening in Microsoft w ord, whenever i am bringing my focus on
any ribbons, its only announcing the focused ribbon, but its not
announcing the command description like to move between the ribbons
press the left or right arrow keys to navigate in the ribbon press the
tab or shift+tab keys.
NVDA used to announce the same in the earlier version. so is this
feature is missing in the latest version of NVDA or do i have to make
any seetings to make it announce?
thanks,
Mukesh
object nav

Kenny Cheung
 

Hi,

I think their was a add-on that played sounds for when you got to a radio button, checkbox, or button. I think it was called Object Nav, will it be updated to work with the current NVDA version?

Kenny
Welcome to the NVDA Community Add-ons website - Ignore Blanks Indentation Reporting #nvdaaddonsfeed

nvda@nvda.groups.io Integration <nvda@...>
 

Ignore Blanks Indentation Reporting

  • Author: Samuel Kacer
  • NVDA compatibility: 2021.1 and beyond
  • Download stable version

This is an NVDA addon that alters the reporting of indentation by disregarding blank lines when deciding whether to report changes in indentation. It is best understood by contrasting with normal behaviour with an example.

Consider this example:

def foo():
    x = 42

    return x

def bar():

The current behaviour of NVDA is to report indentation changes for any line where the indentation has changed, even if the line is blank. So, the example would be read like:

def foo():
tab x = 42
no indent blank
tab return x
no indent blank
def bar():

The disadvantage for this behaviour is that for most programming languages, like python, a blank line has no semantic significance and is just used to visually separate lines of code with no change to the code's meaning. Therefore, by reporting the change of indentation upon entering a blank line and then reporting it again after landing on the next line is just noise that makes it harder to focus on understanding the code.

This addon aims to improve on the behaviour by ignoring blank lines when computing indentation speech, thus the example is read like this instead:

def foo():
tab x = 42
blank
return x

no indent def bar():

Change log

version 0.1

  • Initial release

Source code

Source code repository
Re: Addon for MP3 Direct Cut

Gene
 

In the main window, tabbing does nothing. 
 
I haven’t used the add-on.  For now, you should be able to use a version that works with the add-on as a portable version.
 
Gene

-----Original Message-----
Sent: Tuesday, August 10, 2021 11:01 AM
Subject: Re: [nvda] Addon for MP3 Direct Cut
 
I just tab between the various fields.



-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Rich DeSteno
Sent: August 10, 2021 12:01 PM
To: nvda@nvda.groups.io
Subject: [nvda] Addon for MP3 Direct Cut

I gather that there is no add-on for MP3 Direct Cut that is compatible with the current version of NVDA.  I made good use of the prior add-ons for this program.


--
Rich De Steno
Re: Addon for MP3 Direct Cut

Chris Smart
 

I just tab between the various fields.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Rich DeSteno
Sent: August 10, 2021 12:01 PM
To: nvda@nvda.groups.io
Subject: [nvda] Addon for MP3 Direct Cut

I gather that there is no add-on for MP3 Direct Cut that is compatible with the current version of NVDA. I made good use of the prior add-ons for this program.


--
Rich De Steno
Addon for MP3 Direct Cut

Rich DeSteno
 

I gather that there is no add-on for MP3 Direct Cut that is compatible with the current version of NVDA.  I made good use of the prior add-ons for this program.


--
Rich De Steno
Re: nvda not announcing command description

Gene
 

That isn’t what appears to be wanted.  The descriptions you are talking about appear to be things like reply to the sender of a message when you are on the reply control in a ribbon.  These are not the same messages as in a combo box, for example when JAWS tutor help is on, up and down arrow to select item. 
 
JAWS also announces tutor help when you use control tab even when tutor help is off.
 
Gene

-----Original Message-----
As far as I know the settings you are describing are on by default.
 
Gene   
-----Original Message-----
From: tim
Sent: Tuesday, August 10, 2021 9:18 AM
Subject: Re: [nvda] nvda not announcing command description
 
For that action you need to turn on tool tips in setting, object
presentation. Then it will speak help for those items.

On 8/10/2021 7:05 AM, mukesh jain wrote:
> hello,
> I am using NVDA 2021 with window 10 on my laptop. I am facing the
> difficulties when I use any command NVDA not announcing any command
> description associated with it. say for instance, if i press
> insert+tab to check any focussed item, it only announces the name of
> the focus item but its not announcing the command description or help
> tip associated with it. for example, it should say that to move to
> item press the arrow keys to edit the item press f2.  the same thing
> is happening in Microsoft w
> ord, whenever i am bringing my focus on any ribbons, its only
> announcing the focused ribbon, but its not announcing the command
> description like to move between the ribbons press the left or right
> arrow keys to navigate in the ribbon press the tab or shift+tab keys.
> NVDA used to announce the same in the earlier version. so is this
> feature is missing in the latest version of NVDA or do i have to make
> any seetings to make it announce?
> thanks,
> Mukesh
>
>
>
>
>
Re: nvda not announcing command description

Jujube
 

I'm not 100% sure but you can press NVDA + 2 to toggle the announcing
of command keys, for example if you have this setting enabled if you
press tab NVDA will announce tab and then whatever control is focused.
You can enable the reporting of tooltips in the NVDA settings under
review cursor I believe which may solve your other problem but I could
be wrong.

On 8/10/21, mukesh jain <mukeshfromkorba@...> wrote:
hello,
I am using NVDA 2021 with window 10 on my laptop. I am facing the
difficulties when I use any command NVDA not announcing any command
description associated with it. say for instance, if i press
insert+tab to check any focussed item, it only announces the name of
the focus item but its not announcing the command description or help
tip associated with it. for example, it should say that to move to
item press the arrow keys to edit the item press f2. the same thing
is happening in Microsoft w
ord, whenever i am bringing my focus on any ribbons, its only
announcing the focused ribbon, but its not announcing the command
description like to move between the ribbons press the left or right
arrow keys to navigate in the ribbon press the tab or shift+tab keys.
NVDA used to announce the same in the earlier version. so is this
feature is missing in the latest version of NVDA or do i have to make
any seetings to make it announce?
thanks,
Mukesh
Re: Introducing NVDA-addons.org, the largest international add-ons store with official and unofficial add-ons from all NVDA communities

Nolan Darilek
 

Awesome, the filter data should be small enough to stash in a cookie, and there shouldn't be any additional privacy implications as long as all you stash are the serialized values.


Thanks again, this is definitely a useful resource.

On 8/10/2021 9:31 AM, Iván Novegil via groups.io wrote:

I'll look into this, I'm currently not sure on how to do it on a relatively permanent and user-experience and privacy respectful way. Anyway, you can do something like this: https://nvda-addons.org?lasttested=2021.1


Hope this helps.

Iván Novegil Cancelas
Equipo de xestión web e desenvolvemento



Asociación Comunidad Hispanohablante de NVDA
- Tel.: (+34) 910 05 33 25 ext. 2000
- ivan.novegil@...
- www.NVDA.es
- @nvda_es

Usuario do NVDA en galego

***Esta mensaxe e/ou os seus adxuntos están dirixidos ao seu destinatario e poden conter información privilexiada ou confidencial. A utilización, copia ou divulgación dos mesmos por parte de alguén diferente do destinatario mencionado non están permitidas sen autorización. Se recibiu esta mensaxe por erro pregámoslle o comunique por esta mesma vía e a destrúa.***

O 10/08/2021 á(s) 13:55, Nolan Darilek escribiu:

Finally got a chance to take a look at this, and it's very neat!


One thing I wonder: could filter settings be serialized to a cookie/local storage, and deserialized/defaulted on future visits?


I don't really care about addons not compatible with the latest NVDA, for instance. As of now, I seem to have to reset these preferences on every load. Might be nice to have them persist.


Thanks!

On 8/10/2021 3:51 AM, Iván Novegil via groups.io wrote:

Thank you Florian. All collaboration from other local communities is very appreciated.


Regards.

Iván Novegil Cancelas
Equipo de xestión web e desenvolvemento



Asociación Comunidad Hispanohablante de NVDA
- Tel.: (+34) 910 05 33 25 ext. 2000
- ivan.novegil@...
- www.NVDA.es
- @nvda_es

Usuario do NVDA en galego

***Esta mensaxe e/ou os seus adxuntos están dirixidos ao seu destinatario e poden conter información privilexiada ou confidencial. A utilización, copia ou divulgación dos mesmos por parte de alguén diferente do destinatario mencionado non están permitidas sen autorización. Se recibiu esta mensaxe por erro pregámoslle o comunique por esta mesma vía e a destrúa.***

O 10/08/2021 á(s) 10:19, Florian Ionașcu escribiu:
Hello Ivan and all!
This website is very useful. Congrats to the NVDA Spanish community, this tool is a great contribution to the NVDA world.

Re: Introducing NVDA-addons.org, the largest international add-ons store with official and unofficial add-ons from all NVDA communities

Iván Novegil
 

I'll look into this, I'm currently not sure on how to do it on a relatively permanent and user-experience and privacy respectful way. Anyway, you can do something like this: https://nvda-addons.org?lasttested=2021.1


Hope this helps.

Iván Novegil Cancelas
Equipo de xestión web e desenvolvemento



Asociación Comunidad Hispanohablante de NVDA
- Tel.: (+34) 910 05 33 25 ext. 2000
- ivan.novegil@...
- www.NVDA.es
- @nvda_es

Usuario do NVDA en galego

***Esta mensaxe e/ou os seus adxuntos están dirixidos ao seu destinatario e poden conter información privilexiada ou confidencial. A utilización, copia ou divulgación dos mesmos por parte de alguén diferente do destinatario mencionado non están permitidas sen autorización. Se recibiu esta mensaxe por erro pregámoslle o comunique por esta mesma vía e a destrúa.***

O 10/08/2021 á(s) 13:55, Nolan Darilek escribiu:

Finally got a chance to take a look at this, and it's very neat!


One thing I wonder: could filter settings be serialized to a cookie/local storage, and deserialized/defaulted on future visits?


I don't really care about addons not compatible with the latest NVDA, for instance. As of now, I seem to have to reset these preferences on every load. Might be nice to have them persist.


Thanks!

On 8/10/2021 3:51 AM, Iván Novegil via groups.io wrote:

Thank you Florian. All collaboration from other local communities is very appreciated.


Regards.

Iván Novegil Cancelas
Equipo de xestión web e desenvolvemento



Asociación Comunidad Hispanohablante de NVDA
- Tel.: (+34) 910 05 33 25 ext. 2000
- ivan.novegil@...
- www.NVDA.es
- @nvda_es

Usuario do NVDA en galego

***Esta mensaxe e/ou os seus adxuntos están dirixidos ao seu destinatario e poden conter información privilexiada ou confidencial. A utilización, copia ou divulgación dos mesmos por parte de alguén diferente do destinatario mencionado non están permitidas sen autorización. Se recibiu esta mensaxe por erro pregámoslle o comunique por esta mesma vía e a destrúa.***

O 10/08/2021 á(s) 10:19, Florian Ionașcu escribiu:
Hello Ivan and all!
This website is very useful. Congrats to the NVDA Spanish community, this tool is a great contribution to the NVDA world.

Re: nvda not announcing command description

tim
 

For that action you need to turn on tool tips in setting, object presentation. Then it will speak help for those items.

On 8/10/2021 7:05 AM, mukesh jain wrote:
hello,
I am using NVDA 2021 with window 10 on my laptop. I am facing the
difficulties when I use any command NVDA not announcing any command
description associated with it. say for instance, if i press
insert+tab to check any focussed item, it only announces the name of
the focus item but its not announcing the command description or help
tip associated with it. for example, it should say that to move to
item press the arrow keys to edit the item press f2. the same thing
is happening in Microsoft w
ord, whenever i am bringing my focus on any ribbons, its only
announcing the focused ribbon, but its not announcing the command
description like to move between the ribbons press the left or right
arrow keys to navigate in the ribbon press the tab or shift+tab keys.
NVDA used to announce the same in the earlier version. so is this
feature is missing in the latest version of NVDA or do i have to make
any seetings to make it announce?
thanks,
Mukesh
Re: NVDA audio routing

Robert Doc Wright godfearer
 


Yes, press insert+ctrl+s
tab
arrow down to the sound card represented by your headset and press enter.

----- Original Message -----
From: JinYoun
Sent: Thursday, August 5, 2021 1:30 PM
Subject: [nvda] NVDA audio routing

Hello, I was just curious, is there a way to route NVDA sound to headset and have all other sound play through the default speaker for the pc?
Thank you 

9941 - 9960 of 96798