Date   

Re: The use of Docusign and NVDA

ss sarfudeen
 

Dear members,

I haven't used this tool. Can you please throw some light on how to
use Docusign to sign documents?
Your inputs are highly appreciated.

With kind regards,

Sultana

On 9/8/21, Louise Pfau <lpfau@telus.net> wrote:
I have successfully signed documents with docusign using NVDA and Microsoft

Edge. I have not used the remote application or created documents.

Louise







Re: Clipspeak addon

Rui Fontes
 

Here is a version that should work...

https://www.dropbox.com/s/1ahmqhqbjde3gdm/clipspeak2021.1_compatible_and_translations_possible.nvda-addon?dl=1


You can also use other add-ons to the same purpose...


Rui Fontes


Às 16:41 de 08/09/2021, Brian Vogel escreveu:

There does not seem to be.  Even on GitHub, the original ClipSpeak code has remained unchanged since 2017.  I can't seem to find any easy way to contact the original developer, either.

Since this project is open-source someone else could take it over if the original developer cannot be reached or has made the decision to cease development.
--

Brian - Windows 10, 64-Bit, Version 21H1, Build 19043  

Nothing in all the world is more dangerous than sincere ignorance and conscientious stupidity.

         ~Martin Luther King, Jr.

 


Re: Clipspeak addon

 

There does not seem to be.  Even on GitHub, the original ClipSpeak code has remained unchanged since 2017.  I can't seem to find any easy way to contact the original developer, either.

Since this project is open-source someone else could take it over if the original developer cannot be reached or has made the decision to cease development.
--

Brian - Windows 10, 64-Bit, Version 21H1, Build 19043  

Nothing in all the world is more dangerous than sincere ignorance and conscientious stupidity.

         ~Martin Luther King, Jr.

 


Re: Recording screen using NVDA

Sarah k Alawami
 

Yeah, obs is very accessible.

Tc

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Marco Oros
Sent: Wednesday, September 8, 2021 12:39 AM
To: nvda@nvda.groups.io
Subject: [nvda] Recording screen using NVDA

Hello.

Do You know some software, which is accessible with NVDA to recording screen?

It'll be good, if will be accessible at for example 60%, because I need to record something on a screen.

Thank You.

best regards from Slovakia

Marco Oros


Re: NVDA documentation

David Mellor
 

The commands for prev and next within the container are in the table. The "flattened" next and prev keys, to use the terminology in the NVDA menu input gestures section are not mentioned.
They do seem to have been omitted.
David



From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Rui Fontes
Sent: 08 September 2021 11:38
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA documentation

Sorry, but they are...

Look for the section 5.4. Object Navigation

Then press T to go to table, and they are in lines 3 and 4...


Rui Fontes


Às 11:06 de 08/09/2021, Gene escreveu:
I just checked and when discussing object navigation, the manual doesn’t include the move to previous object and move to next object commands I gave in my last message.
 
Gene
-----Original Message-----
From: Gene
Sent: Wednesday, September 08, 2021 4:58 AM
Subject: Re: [nvda] NVDA documentation
 
I don’t know what you mean by the phrase flattened view.  Are you talking about being in object review and using the commands numpad insert numpad 4 and numpad insert numpad 6?  These are desktop layout commands.
 
Gene
-----Original Message-----
Sent: Wednesday, September 08, 2021 4:53 AM
Subject: [nvda] NVDA documentation
 
Hello group,
I'm not sure who looks after the documentation so I'll post here if that's
okay.
I noticed there was nothing in the manual about the:
* Moves to the next object in a flattened view of the object navigation
hierarchy
* Moves to the previous object in a flattened view of the object navigation
hierarchy
Neither command have keyboard shortcuts associated with them by default.
Perhaps they got forgotten about for the manual.
Best wishes,
David






Clipspeak addon

Chris Mullins
 

Hi

Is there a 2021.1 compatible version of the Clipspeak addon available?  If so, where can I find it?

 

Cheers

Chris

 

Sent from Mail for Windows

 


Re: NVDA documentation

 

Hi,

Quentin is the one who looks after documentation these days, and I sometimes look at user guide.

The flattened view refers to moving to the next or previous object regardless of object navigation hierarchy. For example, you can move from an object to its child, then to the object's sibling, then to the object next to its parent and what not. This was implemented to support object navigation via touchscreen gestures where you can move among objects on the screen regardless of relationship.

Cheers,

Joseph


Re: Unable to click the free resources link at devsecops-academy.com

Pranav Lal
 

Hi all,

 

Many thanks for checking. Brian, I’ll keep the # tip in mind. I did not realize that the link was a same page link.

 

I’ll see if I want to write to the web site’s administrators. Ideally I should but that is beyond the scope of this list.

 

Pranav


Re: NVDA documentation

Gene
 

I read that section before I sent my message.  I didn’t notice the commands.  They are there.
 
Gene

-----Original Message-----
From: Rui Fontes
Sent: Wednesday, September 08, 2021 5:38 AM
Subject: Re: [nvda] NVDA documentation
 

Sorry, but they are...

Look for the section 5.4. Object Navigation

Then press T to go to table, and they are in lines 3 and 4...

 

Rui Fontes

 

Às 11:06 de 08/09/2021, Gene escreveu:
I just checked and when discussing object navigation, the manual doesn’t include the move to previous object and move to next object commands I gave in my last message.
 
Gene
-----Original Message-----
From: Gene
Sent: Wednesday, September 08, 2021 4:58 AM
Subject: Re: [nvda] NVDA documentation
 
I don’t know what you mean by the phrase flattened view.  Are you talking about being in object review and using the commands numpad insert numpad 4 and numpad insert numpad 6?  These are desktop layout commands.
 
Gene
-----Original Message-----
Sent: Wednesday, September 08, 2021 4:53 AM
Subject: [nvda] NVDA documentation
 
Hello group,
I'm not sure who looks after the documentation so I'll post here if that's
okay.
I noticed there was nothing in the manual about the:
* Moves to the next object in a flattened view of the object navigation
hierarchy
* Moves to the previous object in a flattened view of the object navigation
hierarchy
Neither command have keyboard shortcuts associated with them by default.
Perhaps they got forgotten about for the manual.
Best wishes,
David






Re: NVDA documentation

Rui Fontes
 

Sorry, but they are...

Look for the section 5.4. Object Navigation

Then press T to go to table, and they are in lines 3 and 4...


Rui Fontes


Às 11:06 de 08/09/2021, Gene escreveu:

I just checked and when discussing object navigation, the manual doesn’t include the move to previous object and move to next object commands I gave in my last message.
 
Gene
-----Original Message-----
From: Gene
Sent: Wednesday, September 08, 2021 4:58 AM
Subject: Re: [nvda] NVDA documentation
 
I don’t know what you mean by the phrase flattened view.  Are you talking about being in object review and using the commands numpad insert numpad 4 and numpad insert numpad 6?  These are desktop layout commands.
 
Gene
-----Original Message-----
Sent: Wednesday, September 08, 2021 4:53 AM
Subject: [nvda] NVDA documentation
 
Hello group,
I'm not sure who looks after the documentation so I'll post here if that's
okay.
I noticed there was nothing in the manual about the:
* Moves to the next object in a flattened view of the object navigation
hierarchy
* Moves to the previous object in a flattened view of the object navigation
hierarchy
Neither command have keyboard shortcuts associated with them by default.
Perhaps they got forgotten about for the manual.
Best wishes,
David






Re: NVDA documentation

Gene
 

I just checked and when discussing object navigation, the manual doesn’t include the move to previous object and move to next object commands I gave in my last message.
 
Gene

-----Original Message-----
From: Gene
Sent: Wednesday, September 08, 2021 4:58 AM
Subject: Re: [nvda] NVDA documentation
 
I don’t know what you mean by the phrase flattened view.  Are you talking about being in object review and using the commands numpad insert numpad 4 and numpad insert numpad 6?  These are desktop layout commands.
 
Gene
-----Original Message-----
Sent: Wednesday, September 08, 2021 4:53 AM
Subject: [nvda] NVDA documentation
 
Hello group,
I'm not sure who looks after the documentation so I'll post here if that's
okay.
I noticed there was nothing in the manual about the:
* Moves to the next object in a flattened view of the object navigation
hierarchy
* Moves to the previous object in a flattened view of the object navigation
hierarchy
Neither command have keyboard shortcuts associated with them by default.
Perhaps they got forgotten about for the manual.
Best wishes,
David






Re: NVDA documentation

Gene
 

I don’t know what you mean by the phrase flattened view.  Are you talking about being in object review and using the commands numpad insert numpad 4 and numpad insert numpad 6?  These are desktop layout commands.
 
Gene

-----Original Message-----
Sent: Wednesday, September 08, 2021 4:53 AM
Subject: [nvda] NVDA documentation
 
Hello group,
I'm not sure who looks after the documentation so I'll post here if that's
okay.
I noticed there was nothing in the manual about the:
* Moves to the next object in a flattened view of the object navigation
hierarchy
* Moves to the previous object in a flattened view of the object navigation
hierarchy
Neither command have keyboard shortcuts associated with them by default.
Perhaps they got forgotten about for the manual.
Best wishes,
David






Re: thunderbird selected

Gene
 

This problem has nothing to do with physically dirty keys.  It is an NVDA problem in which modifier keys may become stuck on, not physically but in the functioning of the computer.  This was discussed a number of months ago and others verified the problem. 
 
Gene

-----Original Message-----
Sent: Wednesday, September 08, 2021 4:52 AM
Subject: Re: [nvda] thunderbird selected
 

I didn't restart because of the error, I turned off my system because I was going away from it.

This board does type strangely.

I keep planning to take off the caps of this gaming board, warm rince them and then wipe off the switches but never get round to it.

So this board is probably a bit dirty its never really been cleaned bar with vacuum gently since I got it so maybe its full of junk under there.

 

 

On 8/09/2021 9:48 pm, Gene wrote:
You don’t need to restart the system.  This is an NVDA problem in which certain keys get stuck on.  In future, since selecting is a function of the shift key, press each shift key quickly four times.  That should solve the problem.  the reason I said to quit NVDA, then restart it as a test is to test whether this is that NVDA problem. 
 
Also, the reason I said to press each shift four times is that, at least in earlier versions of Windows, pressing it five times would bring up a sticky keys dialog.  That is unrelated to the problem I am discussing but to keep it from coming up, press each shift four times. 
 
There may be other times when you will see other odd behavior.  At those times, pressing each control quickly a number of times, each alt a number of times, and the NVDA key a number of times should solve the problem.  Press the NVDA key, if it is the insert, an even number of times to avoid overwrite from being enabled.  If it is enabled, press it twice quickly again.
 
Gene
-----Original Message------
Sent: Wednesday, September 08, 2021 4:41 AM
Subject: Re: [nvda] thunderbird selected
 
Strangely enough after I restarted the system its not doing that anymore.



On 8/09/2021 9:02 pm, Gene wrote:
> See if the problem is the NVDA sticky key problem.  For now, quit
> NVDA, then run it again.  Does the problem still occur?
>
>
> Gene
>
> On 9/8/2021 3:16 AM, Shaun Everiss wrote:
>> Hi.
>>
>> Just noticed in the message body of thunderbird, whenever I read a
>> message, when viewing, nvda will say selected at the end of the end
>> of the current read line.
>>
>> I could I guess make it stop saying selected while in thunderbird
>> with an app profile but that would probably stop it saying selected
>> when I navigate history and address book and thats not what I want.
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>





NVDA documentation

David Mellor
 

Hello group,
I'm not sure who looks after the documentation so I'll post here if that's
okay.
I noticed there was nothing in the manual about the:
* Moves to the next object in a flattened view of the object navigation
hierarchy
* Moves to the previous object in a flattened view of the object navigation
hierarchy
Neither command have keyboard shortcuts associated with them by default.
Perhaps they got forgotten about for the manual.
Best wishes,
David


Re: thunderbird selected

 

I didn't restart because of the error, I turned off my system because I was going away from it.

This board does type strangely.

I keep planning to take off the caps of this gaming board, warm rince them and then wipe off the switches but never get round to it.

So this board is probably a bit dirty its never really been cleaned bar with vacuum gently since I got it so maybe its full of junk under there.



On 8/09/2021 9:48 pm, Gene wrote:
You don’t need to restart the system.  This is an NVDA problem in which certain keys get stuck on.  In future, since selecting is a function of the shift key, press each shift key quickly four times.  That should solve the problem.  the reason I said to quit NVDA, then restart it as a test is to test whether this is that NVDA problem. 
 
Also, the reason I said to press each shift four times is that, at least in earlier versions of Windows, pressing it five times would bring up a sticky keys dialog.  That is unrelated to the problem I am discussing but to keep it from coming up, press each shift four times. 
 
There may be other times when you will see other odd behavior.  At those times, pressing each control quickly a number of times, each alt a number of times, and the NVDA key a number of times should solve the problem.  Press the NVDA key, if it is the insert, an even number of times to avoid overwrite from being enabled.  If it is enabled, press it twice quickly again.
 
Gene
-----Original Message------
Sent: Wednesday, September 08, 2021 4:41 AM
Subject: Re: [nvda] thunderbird selected
 
Strangely enough after I restarted the system its not doing that anymore.



On 8/09/2021 9:02 pm, Gene wrote:
> See if the problem is the NVDA sticky key problem.  For now, quit
> NVDA, then run it again.  Does the problem still occur?
>
>
> Gene
>
> On 9/8/2021 3:16 AM, Shaun Everiss wrote:
>> Hi.
>>
>> Just noticed in the message body of thunderbird, whenever I read a
>> message, when viewing, nvda will say selected at the end of the end
>> of the current read line.
>>
>> I could I guess make it stop saying selected while in thunderbird
>> with an app profile but that would probably stop it saying selected
>> when I navigate history and address book and thats not what I want.
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>





Re: Recording screen using NVDA

umut korkmaz
 

Hi Marco,

You can try OBS Studio.

nvda-addons.org

There is also a addon on the site.

I hope it helps.

Regards,

Umut KORKMAZ

 

Windows için Posta ile gönderildi

 

Kimden: Marco Oros
Gönderilme: 8 Eylül 2021 Çarşamba 10:39
Kime: nvda@nvda.groups.io
Konu: [nvda] Recording screen using NVDA

 

Hello.

 

Do You know some software, which is accessible with NVDA to recording

screen?

 

It'll be good, if will be accessible at for example 60%, because I need

to record something on a screen.

 

Thank You.

 

best regards from Slovakia

 

Marco Oros

 

 

 

 

 

 


Re: thunderbird selected

Gene
 

You don’t need to restart the system.  This is an NVDA problem in which certain keys get stuck on.  In future, since selecting is a function of the shift key, press each shift key quickly four times.  That should solve the problem.  the reason I said to quit NVDA, then restart it as a test is to test whether this is that NVDA problem. 
 
Also, the reason I said to press each shift four times is that, at least in earlier versions of Windows, pressing it five times would bring up a sticky keys dialog.  That is unrelated to the problem I am discussing but to keep it from coming up, press each shift four times. 
 
There may be other times when you will see other odd behavior.  At those times, pressing each control quickly a number of times, each alt a number of times, and the NVDA key a number of times should solve the problem.  Press the NVDA key, if it is the insert, an even number of times to avoid overwrite from being enabled.  If it is enabled, press it twice quickly again.
 
Gene

-----Original Message------
Sent: Wednesday, September 08, 2021 4:41 AM
Subject: Re: [nvda] thunderbird selected
 
Strangely enough after I restarted the system its not doing that anymore.



On 8/09/2021 9:02 pm, Gene wrote:
> See if the problem is the NVDA sticky key problem.  For now, quit
> NVDA, then run it again.  Does the problem still occur?
>
>
> Gene
>
> On 9/8/2021 3:16 AM, Shaun Everiss wrote:
>> Hi.
>>
>> Just noticed in the message body of thunderbird, whenever I read a
>> message, when viewing, nvda will say selected at the end of the end
>> of the current read line.
>>
>> I could I guess make it stop saying selected while in thunderbird
>> with an app profile but that would probably stop it saying selected
>> when I navigate history and address book and thats not what I want.
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>





Re: thunderbird selected

 

Strangely enough after I restarted the system its not doing that anymore.

On 8/09/2021 9:02 pm, Gene wrote:
See if the problem is the NVDA sticky key problem.  For now, quit NVDA, then run it again.  Does the problem still occur?


Gene

On 9/8/2021 3:16 AM, Shaun Everiss wrote:
Hi.

Just noticed in the message body of thunderbird, whenever I read a message, when viewing, nvda will say selected at the end of the end of the current read line.

I could I guess make it stop saying selected while in thunderbird with an app profile but that would probably stop it saying selected when I navigate history and address book and thats not what I want.









Re: thunderbird selected

Gene
 

See if the problem is the NVDA sticky key problem.  For now, quit NVDA, then run it again.  Does the problem still occur?


Gene

On 9/8/2021 3:16 AM, Shaun Everiss wrote:
Hi.

Just noticed in the message body of thunderbird, whenever I read a message, when viewing, nvda will say selected at the end of the end of the current read line.

I could I guess make it stop saying selected while in thunderbird with an app profile but that would probably stop it saying selected when I navigate history and address book and thats not what I want.






thunderbird selected

 

Hi.

Just noticed in the message body of thunderbird, whenever I read a message, when viewing, nvda will say selected at the end of the end of the current read line.

I could I guess make it stop saying selected while in thunderbird with an app profile but that would probably stop it saying selected when I navigate history and address book and thats not what I want.

7941 - 7960 of 95303