Date   

Re: Accessible Website Host with Drupal 9

Jackie
 

Amelia, please contact me off list at
abletec at GMail dot com
that email is seriously munged to (hopefully) thwart at least some of
the spam harvesters out there.

Apologies Nimer & Brian V.

On 9/16/21, Amelia Anne Dickerson <Amelia.Dickerson@colorado.edu> wrote:
Apologies, I asked a question related to Acquia's Dev Desktop yesterday. I
went ahead and gave it a try, only to find it's no longer supported by
Acquia. So now I'm looking for an accessible website host where I can use
Drupal 9.

Please forgive my naiveté. I'm a beginner. When I Google this, I just find
tips for how to make my website accessible. That's not what I'm looking for.
Does anyone have a favorite website host? Free is pretty important to me.

Warm Regards,
Amelia Dickerson
Digital Accessibility Office
Amelia.dickerson@colorado.edu






--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@freelists.org with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com


Accessible Website Host with Drupal 9

Amelia Anne Dickerson
 

Apologies, I asked a question related to Acquia’s Dev Desktop yesterday. I went ahead and gave it a try, only to find it’s no longer supported by Acquia. So now I’m looking for an accessible website host where I can use Drupal 9.

 

Please forgive my naiveté. I’m a beginner. When I Google this, I just find tips for how to make my website accessible. That’s not what I’m looking for. Does anyone have a favorite website host? Free is pretty important to me.

 

Warm Regards,

Amelia Dickerson

Digital Accessibility Office

Amelia.dickerson@...

 


Re: Speech being interrupted when I pan to the next line on braille display

Jujube
 

Thanks! I'll try that :)


On Thu, Sep 16, 2021 at 12:43 AM Simone Dal Maso <simone.dalmaso@...> wrote:
Yes, this is the normal behaviour.
I solved the problem installing the addon braille extender.

Il 16/09/2021 02:01, Jujube ha scritto:
> That's what I'm getting at actually.
>
> On Wed, Sep 15, 2021 at 4:41 PM Christopher Kchao <cskchao@...
> <mailto:cskchao@...>> wrote:
>
>     Hello,
>     Unfortunately, toggling this option does not appear to change the
>     behavior where Braille is concerned. During any time speech output
>     occurs and a user presses a panning control on their Braille
>     display, the display refreshes to reflect the change, but speech is
>     silenced. This behavior also persists regardless of the Braille
>     tethering setting.
>
>     Best,
>     CK
>
>
>     On Mon, Sep 13, 2021 at 2:11 AM Quentin Christensen
>     <quentin@... <mailto:quentin@...>> wrote:
>
>         In NVDA's keyboard settings (Press NVDA+control+k to open those
>         directly) there is an option to "Allow skim reading in Say All".
>
>         If on, certain navigation commands (such as quick navigation in
>         browse mode or moving by line or paragraph) do not stop Say All,
>         rather Say All jumps to the new position and continues reading.
>
>         That sounds like it might be what you are after.
>
>         Kind regards
>
>         Quentin.
>
>         On Sun, Sep 12, 2021 at 2:38 AM Jujube <ellaxyu@...
>         <mailto:ellaxyu@...>> wrote:
>
>             Hi everyone, This is a small annoyance I discovered
>             literally just now but I notice that when I pan to the next
>             line on my braille display, NVDA stops reading. I tried
>             using say all but braille display panning interrupts say
>             all. I wonder if there's a configurable setting for that? If
>             not, I understand. Thanks for any help.
>
>
>
>         --
>         Quentin Christensen
>         Training and Support Manager
>
>         Web: www.nvaccess.org <http://www.nvaccess.org/>
>         Training: https://www.nvaccess.org/shop/
>         <https://www.nvaccess.org/shop/>
>         Certification: https://certification.nvaccess.org/
>         <https://certification.nvaccess.org/>
>         User group: https://nvda.groups.io/g/nvda
>         <https://nvda.groups.io/g/nvda>
>         Facebook: http://www.facebook.com/NVAccess
>         <http://www.facebook.com/NVAccess>
>         Twitter: @NVAccess <https://twitter.com/NVAccess>
>
>







Re: delayed speech

Gene
 

I believe the page I gave a link to briefly discusses how to use the program.  As I recall, you have to set it to work with the specific sound card.  If it isn’t clear how to work with the program, ask here.  I haven’t used it.
 
Gene

-----Original Message-----
Sent: Thursday, September 16, 2021 10:14 AM
Subject: Re: [nvda] delayed speech
 
hello, there is such a problem on my computer, which setting should be made in the silanzo program for it to work properly


Re: delayed speech

 

On Thu, Sep 16, 2021 at 11:19 AM, mehmet çetin wrote:
which setting should be made in the silanzo program for it to work properly
-
There is no setting, to my knowledge.  The program simply has to be running in the background.  It constantly feeds "silence" to the sound card so that it can never go to sleep and, indirectly, neither can any Bluetooth audio device it's streaming to.

And by feeding silence I mean just that - it plays zero volume sound.  What allows the card to be put to sleep is when no sound is being sent to it by anything.

There is also an NVDA Add-On, BluetoothAudio, meant to address the same issue.
 
--

Brian - Windows 10, 64-Bit, Version 21H1, Build 19043  

Nothing in all the world is more dangerous than sincere ignorance and conscientious stupidity.

         ~Martin Luther King, Jr.

 


Re: delayed speech

mehmet çetin
 

hello, there is such a problem on my computer, which setting should be made in the silanzo program for it to work properly


Re: Audio ducking not supported?

Jackie
 

Woops, I am *so* sorry, Andre! Thanks, Brian V. The part regarding the
control panel still applies, however. Again, humblest apologies.
Sometimes, more than not I fear, I'm an idiot.

On 9/16/21, Brian Vogel <britechguy@gmail.com> wrote:
On Wed, Sep 15, 2021 at 10:38 PM, Jackie wrote:


Hey Andre, just for the halibut, have you tried a portable install? &
have
you gone into control panel per my previous post to enable audio
ducking there?
-
Audio ducking is definitely not supported in NVDA portable.  See the very
recent topic: Audio ducking is not supported under NVDA portable (
https://nvda.groups.io/g/nvda/topic/85370652 ) , which notes that this is in
the official documentation.
--

Brian - Windows 10, 64-Bit, Version 21H1, Build 19043

Nothing in all the world is more dangerous than sincere ignorance and
conscientious stupidity.

~Martin Luther King, Jr.





--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@freelists.org with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com


Re: Audio ducking not supported?

 

On Wed, Sep 15, 2021 at 10:38 PM, Jackie wrote:
Hey Andre, just for the halibut, have you tried a portable install? & have you gone into control panel per my previous post to enable audio
ducking there?
-
Audio ducking is definitely not supported in NVDA portable.  See the very recent topic:  Audio ducking is not supported under NVDA portable, which notes that this is in the official documentation.
--

Brian - Windows 10, 64-Bit, Version 21H1, Build 19043  

Nothing in all the world is more dangerous than sincere ignorance and conscientious stupidity.

         ~Martin Luther King, Jr.

 


Re: delayed speech

Gene
 

The sound card goes to sleep after a period of silence.  Use Silenzio to work around the problem. 
If you follow this link, you can read about it and download it.
 
When you are on the page, search from the top for Silenzio. 
 
Gene

Sent: Thursday, September 16, 2021 8:20 AM
Subject: [nvda] delayed speech
 
what would cause NVDA  to delay in speaking after it has been idol? A friend is having this problem on a brand new pc. He can up arrow to text and it speaks a second and a half later.


delayed speech

Robert Doc Wright godfearer
 

what would cause NVDA  to delay in speaking after it has been idol? A friend is having this problem on a brand new pc. He can up arrow to text and it speaks a second and a half later.


Re: Turning Off Braille Translation

John J. Boyer
 

Hello,

Go to the Braille tables and pick the english U.s. 8 dot computer Braille table. i have done this so I could read things that have already been translated to Grade 2.
You may find that the files are in brf format with dot 7 on most of the time. I had to write a program to remove it from some brf files that I wanted to read from BARD.
Let me know if you want further heolp.

John

On Thu, Sep 16, 2021 at 09:38:45AM +0100, H l wrote:
Hey everyone,

Just a quick question. How do I turn off automatic braille translation in NVDA? I want to read some stuff on www.grade3braille.com <http://www.grade3braille.com> , but it advises people using braille displays to turn the translation off. I can’t find it in the NVDA settings though.

Thanks,

Harmony.





--
John J. Boyer
Email: john.boyer@abilitiessoft.org
website: http://www.abilitiessoft.org
Status: Company dissolved but website and email addresses live.
Location: Madison, Wisconsin, USA
Mission: developing assistive technology software and providing STEM services
that are available at no cost


Re: Turning Off Braille Translation

dennis huckle <denniswhuckle@...>
 

Hello,

Please tell me where you have set your output table set at present.

Also which braille display are you using.

If you want to come back to me off line at

dwhuckle@...

I’ll be happy to work with you on this.

I suspect, but aren’t sure at present, that if you set your output table to American eight dot computer braille, otherwise known as grade 0, this may help.

Please let me know.

I use a focus 14 braille display and have written my own list of braille commands that work with nvda but aren’t sure about commands for other displays.

Kind regards,

Dennis huckle.

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of H l
Sent: 16 September 2021 09:39
To: nvda@groups.io
Subject: [nvda] Turning Off Braille Translation

 

Hey everyone,

Just a quick question. How do I turn off automatic braille translation in NVDA? I want to read some stuff on www.grade3braille.com, but it advises people using braille displays to turn the translation off. I can’t find it in the NVDA settings though.

Thanks,

Harmony.


Turning Off Braille Translation

H l
 

Hey everyone,

Just a quick question. How do I turn off automatic braille translation in NVDA? I want to read some stuff on www.grade3braille.com, but it advises people using braille displays to turn the translation off. I can’t find it in the NVDA settings though.

Thanks,

Harmony.


Re: Audio ducking not supported?

benmoxey@...
 

Hey Andre

Have you tried selecting a different synthesiser? My OneCore voices are ducking, but my SAPI5 Eloquence isn't. Mind you, the ducking options are still there.

Cheers

Ben.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Jackie
Sent: Thursday, 16 September 2021 12:38 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Audio ducking not supported?

Hey Andre, just for the halibut, have you tried a portable install? & have you gone into control panel per my previous post to enable audio ducking there?

On 9/15/21, Richard Wells <richwels@gmx.com> wrote:
When I open settings/speech/change synthesizer, I find audio ducking
right there as always.

On 9/15/2021 7:26 PM, Andre Fisher wrote:
Hi.

I don't even have the setting available from anywhere. So, I can't
turn it on or off. Narrator's ducking is working well, too. So, I
just can't understand what could be the problem.





--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@freelists.org with 'subscribe' in the Subject field OR by visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com


Re: Speech being interrupted when I pan to the next line on braille display

Simone Dal Maso
 

Yes, this is the normal behaviour.
I solved the problem installing the addon braille extender.

Il 16/09/2021 02:01, Jujube ha scritto:
That's what I'm getting at actually.
On Wed, Sep 15, 2021 at 4:41 PM Christopher Kchao <cskchao@gmail.com <mailto:cskchao@gmail.com>> wrote:
Hello,
Unfortunately, toggling this option does not appear to change the
behavior where Braille is concerned. During any time speech output
occurs and a user presses a panning control on their Braille
display, the display refreshes to reflect the change, but speech is
silenced. This behavior also persists regardless of the Braille
tethering setting.
Best,
CK
On Mon, Sep 13, 2021 at 2:11 AM Quentin Christensen
<quentin@nvaccess.org <mailto:quentin@nvaccess.org>> wrote:
In NVDA's keyboard settings (Press NVDA+control+k to open those
directly) there is an option to "Allow skim reading in Say All".
If on, certain navigation commands (such as quick navigation in
browse mode or moving by line or paragraph) do not stop Say All,
rather Say All jumps to the new position and continues reading.
That sounds like it might be what you are after.
Kind regards
Quentin.
On Sun, Sep 12, 2021 at 2:38 AM Jujube <ellaxyu@gmail.com
<mailto:ellaxyu@gmail.com>> wrote:
Hi everyone, This is a small annoyance I discovered
literally just now but I notice that when I pan to the next
line on my braille display, NVDA stops reading. I tried
using say all but braille display panning interrupts say
all. I wonder if there's a configurable setting for that? If
not, I understand. Thanks for any help.
--
Quentin Christensen
Training and Support Manager
Web: www.nvaccess.org <http://www.nvaccess.org/>
Training: https://www.nvaccess.org/shop/
<https://www.nvaccess.org/shop/>
Certification: https://certification.nvaccess.org/
<https://certification.nvaccess.org/>
User group: https://nvda.groups.io/g/nvda
<https://nvda.groups.io/g/nvda>
Facebook: http://www.facebook.com/NVAccess
<http://www.facebook.com/NVAccess>
Twitter: @NVAccess <https://twitter.com/NVAccess>


locked Re: regarding adding my voice as an variant of nvda

udit pandey
 

then what?


On Thu, 16 Sept 2021 at 09:29, Luis Carlos González Moráles <luiscarlosgm@...> wrote:
Why not create/synthesize your own in RHVoice? I was in contact with Louder pages about a spanish RHVoice and...

udit pandey wrote:
but I want to make my own synthesizer

On Thu, 16 Sept 2021 at 01:09, hurrikennyandopo ... <hurrikennyandopo@...> wrote:

Hi  udit


If you are talking about making your own E speak voice you do not use your voice to record a sample of it. It is more playing around with certain parts of it like changing the tone etc then listening to it to see if it does what you want. There is a file in where all the voices are keaped called tweaky that will guide you on how to do it.


It might be different for the sapi version but have not tried it.


There is also a link here that is off one of my pages of where to look to find the E speak voices where they are keap.


Look for the headings that refer to E speak and they will show you where to look on the installer version as well as the portable version..


The link to this page is http://www.accessibilitycentral.net/how%20to%20install%20additional%20nvda%20components.html




I have put in the contents below for the tweaky file.


Yu can copy the content of the tweaky file into notepad then make some changes. But to hear the difference it must be put back into the folder where they are keap.


You can use notepad to play around with the settings.





##Please note the 2 number signs, or pound signs in this file are for comments to help you to understand what the settings are and how to set them. 
## Language sets the language of your voice.  This setting is required for every voice that you make.
##The next line is a setting you can change.  However if you don't know the language codes it may be best to leave the setting as it is.
language variant

## The name setting is the name that will show up in the voice settings in the variant combo box.
##The next line is a setting you can change
name Tweaky

##The formant settings
##  Formant 0 is used to give a low frequency component to the sounds.
## The three numbers are frequency, strength, and Width, in that order.  Please note, the numbers are seperated by a space.
##The next line is a setting you can change
formant 0 100 100 100

# Formants 1,2, and 3 are the standard three formants which define vowels.
##The next 3 lines are settings you can change
formant 1 100 100 100
formant 2 100 100 100
formant 3 200 100 100

# Formants 4,5 are higher than F3. They affect the quality of the voice.
##The next 2 lines are settings that you can change.
formant 4 100 100 100
formant 5 100 100 100

## Formants 6, 7, and 8 are weak, high frequency, additions to vowels to give a clearer sound.
##The next 3 lines are settings that you can change.
formant 6 100 100 100
formant 7 100 100 100
formant 8 100 100 100

##Intonation affects the rise and fall of the voice   
## The settings are 1 default, 2 less intonation, 3 less intonation and commas do not raise the pitch, 4 the pitch rises at the end of a sentence rather than falling.
##The next line is a setting you can change.
intonation 1

# Setting the pitch range.  The first number gives a base pitch to the voice (value in Hertz).  The second number controls the range of pitches used by the voice. Setting it equal
# to the first number will give a monotone sounding voice.  The default values are 82 and 118.
pitch 82 118
## The tone setting.  The first number on the setting line, 600, is the frequency setting for the amount of bass in the voice.
## The second number on the tone line is the volume of the bass frequency.  You can set it from 0 to 255, 0 being the least amount, 255 being the most.
##The third number on the tone line, 1200, is the mid range frequency.  The fourth number on the line is the setting to change the volume of the mid range frequency.
##0 being the least amount and 255 being the maximum.
## The fifth number on the tone line, 2000, is the treble frequency.  The sixth number is the volume of the treble frequency.  0 is the minimum and 255 is the maximum.
##  You will notice that all 3 frequencies are set to 255.
##The next line is a setting that you can change.
tone 600 255  1200 255 2000 255
##This file does not include all of the settings that can be used to modify an E Speak voice.  It is intended to get you familiar with what the settings do.
##However, you can go to http://espeak.sourceforge.net/voices.html and read further information about other settings that can be added and changed.  I hope this helps, and Have fun.



On 16/09/2021 4:28 am, udit pandey wrote:
hi group,
Hope that you all are in good health I wanted to know that can I add my voice for nvda eg. I can record my voice and then nvda have an variant of my name



--
hope that you all are safe with your family,
 udit
follow me on instagram: udit@pandey123
mail me on gmail at udit52805@...
or outlook me at uditpandey6474@outlook
we should not never speak bad, we should never see bad, and we should never lisson bad




--
hope that you all are safe with your family,
 udit
follow me on instagram: udit@pandey123
mail me on gmail at udit52805@...
or outlook me at uditpandey6474@outlook
we should not never speak bad, we should never see bad, and we should never lisson bad


locked Re: regarding adding my voice as an variant of nvda

Luis Carlos González Moráles
 

Why not create/synthesize your own in RHVoice? I was in contact with Louder pages about a spanish RHVoice and...

udit pandey wrote:

but I want to make my own synthesizer

On Thu, 16 Sept 2021 at 01:09, hurrikennyandopo ... <hurrikennyandopo@...> wrote:

Hi  udit


If you are talking about making your own E speak voice you do not use your voice to record a sample of it. It is more playing around with certain parts of it like changing the tone etc then listening to it to see if it does what you want. There is a file in where all the voices are keaped called tweaky that will guide you on how to do it.


It might be different for the sapi version but have not tried it.


There is also a link here that is off one of my pages of where to look to find the E speak voices where they are keap.


Look for the headings that refer to E speak and they will show you where to look on the installer version as well as the portable version..


The link to this page is http://www.accessibilitycentral.net/how%20to%20install%20additional%20nvda%20components.html




I have put in the contents below for the tweaky file.


Yu can copy the content of the tweaky file into notepad then make some changes. But to hear the difference it must be put back into the folder where they are keap.


You can use notepad to play around with the settings.





##Please note the 2 number signs, or pound signs in this file are for comments to help you to understand what the settings are and how to set them. 
## Language sets the language of your voice.  This setting is required for every voice that you make.
##The next line is a setting you can change.  However if you don't know the language codes it may be best to leave the setting as it is.
language variant

## The name setting is the name that will show up in the voice settings in the variant combo box.
##The next line is a setting you can change
name Tweaky

##The formant settings
##  Formant 0 is used to give a low frequency component to the sounds.
## The three numbers are frequency, strength, and Width, in that order.  Please note, the numbers are seperated by a space.
##The next line is a setting you can change
formant 0 100 100 100

# Formants 1,2, and 3 are the standard three formants which define vowels.
##The next 3 lines are settings you can change
formant 1 100 100 100
formant 2 100 100 100
formant 3 200 100 100

# Formants 4,5 are higher than F3. They affect the quality of the voice.
##The next 2 lines are settings that you can change.
formant 4 100 100 100
formant 5 100 100 100

## Formants 6, 7, and 8 are weak, high frequency, additions to vowels to give a clearer sound.
##The next 3 lines are settings that you can change.
formant 6 100 100 100
formant 7 100 100 100
formant 8 100 100 100

##Intonation affects the rise and fall of the voice   
## The settings are 1 default, 2 less intonation, 3 less intonation and commas do not raise the pitch, 4 the pitch rises at the end of a sentence rather than falling.
##The next line is a setting you can change.
intonation 1

# Setting the pitch range.  The first number gives a base pitch to the voice (value in Hertz).  The second number controls the range of pitches used by the voice. Setting it equal
# to the first number will give a monotone sounding voice.  The default values are 82 and 118.
pitch 82 118
## The tone setting.  The first number on the setting line, 600, is the frequency setting for the amount of bass in the voice.
## The second number on the tone line is the volume of the bass frequency.  You can set it from 0 to 255, 0 being the least amount, 255 being the most.
##The third number on the tone line, 1200, is the mid range frequency.  The fourth number on the line is the setting to change the volume of the mid range frequency.
##0 being the least amount and 255 being the maximum.
## The fifth number on the tone line, 2000, is the treble frequency.  The sixth number is the volume of the treble frequency.  0 is the minimum and 255 is the maximum.
##  You will notice that all 3 frequencies are set to 255.
##The next line is a setting that you can change.
tone 600 255  1200 255 2000 255
##This file does not include all of the settings that can be used to modify an E Speak voice.  It is intended to get you familiar with what the settings do.
##However, you can go to http://espeak.sourceforge.net/voices.html and read further information about other settings that can be added and changed.  I hope this helps, and Have fun.



On 16/09/2021 4:28 am, udit pandey wrote:
hi group,
Hope that you all are in good health I wanted to know that can I add my voice for nvda eg. I can record my voice and then nvda have an variant of my name



--
hope that you all are safe with your family,
 udit
follow me on instagram: udit@pandey123
mail me on gmail at udit52805@...
or outlook me at uditpandey6474@outlook
we should not never speak bad, we should never see bad, and we should never lisson bad



locked Re: regarding adding my voice as an variant of nvda

udit pandey
 

but I want to make my own synthesizer


On Thu, 16 Sept 2021 at 01:09, hurrikennyandopo ... <hurrikennyandopo@...> wrote:

Hi  udit


If you are talking about making your own E speak voice you do not use your voice to record a sample of it. It is more playing around with certain parts of it like changing the tone etc then listening to it to see if it does what you want. There is a file in where all the voices are keaped called tweaky that will guide you on how to do it.


It might be different for the sapi version but have not tried it.


There is also a link here that is off one of my pages of where to look to find the E speak voices where they are keap.


Look for the headings that refer to E speak and they will show you where to look on the installer version as well as the portable version..


The link to this page is http://www.accessibilitycentral.net/how%20to%20install%20additional%20nvda%20components.html




I have put in the contents below for the tweaky file.


Yu can copy the content of the tweaky file into notepad then make some changes. But to hear the difference it must be put back into the folder where they are keap.


You can use notepad to play around with the settings.





##Please note the 2 number signs, or pound signs in this file are for comments to help you to understand what the settings are and how to set them. 
## Language sets the language of your voice.  This setting is required for every voice that you make.
##The next line is a setting you can change.  However if you don't know the language codes it may be best to leave the setting as it is.
language variant

## The name setting is the name that will show up in the voice settings in the variant combo box.
##The next line is a setting you can change
name Tweaky

##The formant settings
##  Formant 0 is used to give a low frequency component to the sounds.
## The three numbers are frequency, strength, and Width, in that order.  Please note, the numbers are seperated by a space.
##The next line is a setting you can change
formant 0 100 100 100

# Formants 1,2, and 3 are the standard three formants which define vowels.
##The next 3 lines are settings you can change
formant 1 100 100 100
formant 2 100 100 100
formant 3 200 100 100

# Formants 4,5 are higher than F3. They affect the quality of the voice.
##The next 2 lines are settings that you can change.
formant 4 100 100 100
formant 5 100 100 100

## Formants 6, 7, and 8 are weak, high frequency, additions to vowels to give a clearer sound.
##The next 3 lines are settings that you can change.
formant 6 100 100 100
formant 7 100 100 100
formant 8 100 100 100

##Intonation affects the rise and fall of the voice   
## The settings are 1 default, 2 less intonation, 3 less intonation and commas do not raise the pitch, 4 the pitch rises at the end of a sentence rather than falling.
##The next line is a setting you can change.
intonation 1

# Setting the pitch range.  The first number gives a base pitch to the voice (value in Hertz).  The second number controls the range of pitches used by the voice. Setting it equal
# to the first number will give a monotone sounding voice.  The default values are 82 and 118.
pitch 82 118
## The tone setting.  The first number on the setting line, 600, is the frequency setting for the amount of bass in the voice.
## The second number on the tone line is the volume of the bass frequency.  You can set it from 0 to 255, 0 being the least amount, 255 being the most.
##The third number on the tone line, 1200, is the mid range frequency.  The fourth number on the line is the setting to change the volume of the mid range frequency.
##0 being the least amount and 255 being the maximum.
## The fifth number on the tone line, 2000, is the treble frequency.  The sixth number is the volume of the treble frequency.  0 is the minimum and 255 is the maximum.
##  You will notice that all 3 frequencies are set to 255.
##The next line is a setting that you can change.
tone 600 255  1200 255 2000 255
##This file does not include all of the settings that can be used to modify an E Speak voice.  It is intended to get you familiar with what the settings do.
##However, you can go to http://espeak.sourceforge.net/voices.html and read further information about other settings that can be added and changed.  I hope this helps, and Have fun.



On 16/09/2021 4:28 am, udit pandey wrote:
hi group,
Hope that you all are in good health I wanted to know that can I add my voice for nvda eg. I can record my voice and then nvda have an variant of my name



--
hope that you all are safe with your family,
 udit
follow me on instagram: udit@pandey123
mail me on gmail at udit52805@...
or outlook me at uditpandey6474@outlook
we should not never speak bad, we should never see bad, and we should never lisson bad


Re: Audio ducking not supported?

Jackie
 

Hey Andre, just for the halibut, have you tried a portable install? &
have you gone into control panel per my previous post to enable audio
ducking there?

On 9/15/21, Richard Wells <richwels@gmx.com> wrote:
When I open settings/speech/change synthesizer, I find audio ducking
right there as always.

On 9/15/2021 7:26 PM, Andre Fisher wrote:
Hi.

I don't even have the setting available from anywhere. So, I can't
turn it on or off. Narrator's ducking is working well, too. So, I just
can't understand what could be the problem.




--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@freelists.org with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com


Re: Audio ducking not supported?

Richard Wells
 

When I open settings/speech/change synthesizer, I find audio ducking right there as always.

On 9/15/2021 7:26 PM, Andre Fisher wrote:
Hi.

I don't even have the setting available from anywhere. So, I can't turn it on or off. Narrator's ducking is working well, too. So, I just can't understand what could be the problem.

4261 - 4280 of 91853