Hi Nevzat



The issue in this document may be related to proofing language
settings. Try the following to resolve:

1. Select all text in the document with Control + A.
2. Go to the Review ribbon/Language/Language/Set proofing language.
3. Choose the language you want and hit Ok.



The synthesiser should now stay in that language throughout the document.



Note that these instructions are for Microsoft 365. I think the Review
ribbon might be a slightly different layout in earlier versions, but
you’re still looking for “Set proofing language”.



All the best!



Ben



-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Nevzat
Adil
Sent: Wednesday, 3 November 2021 1:59 AM
To: nvda@nvda.groups.io
Subject: [nvda] Language issue



Hi group,



Recently I added additional languages by going to the control panel
and French was one of them.

I am doing work on a MS Word form and NVDA speaks french although my
choice in both NVDA and the language choice under Control Panel is English.

The strange thing is that when I opened another Word document, not a
form, and typed sentences the result was in English.

I went back to languages under Control Panel and removed French.

But nothing changed. I still hear French in my MS Word form.

I would like to hear your take on this phenomenon and your ideas how
to put it right.

Thanking you in advance for your contributions.

Nevzat



--

Nevzat Adil

Library of Congress Certified

Literary Braille Proofreader

C: 512 502 4403

e-mail: <mailto:nevzatadil@...> nevzatadil@...

Facebook: m.facebook.com/LiteraryBrailleProofreader

Hi Nevzat



The issue in this document may be related to proofing language settings. Try
the following to resolve:

1. Select all text in the document with Control + A.
2. Go to the Review ribbon/Language/Language/Set proofing language.
3. Choose the language you want and hit Ok.



The synthesiser should now stay in that language throughout the document.



Note that these instructions are for Microsoft 365. I think the Review
ribbon might be a slightly different layout in earlier versions, but you’re
still looking for “Set proofing language”.



All the best!



Ben



-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Nevzat Adil
Sent: Wednesday, 3 November 2021 1:59 AM
To: nvda@nvda.groups.io
Subject: [nvda] Language issue



Hi group,



Recently I added additional languages by going to the control panel and
French was one of them.

I am doing work on a MS Word form and NVDA speaks french although my choice
in both NVDA and the language choice under Control Panel is English.

The strange thing is that when I opened another Word document, not a form,
and typed sentences the result was in English.

I went back to languages under Control Panel and removed French.

But nothing changed. I still hear French in my MS Word form.

I would like to hear your take on this phenomenon and your ideas how to put
it right.

Thanking you in advance for your contributions.

Nevzat



--

Nevzat Adil

Library of Congress Certified

Literary Braille Proofreader

C: 512 502 4403

e-mail: <mailto:nevzatadil@...> nevzatadil@...

Facebook: m.facebook.com/LiteraryBrailleProofreader

Hello everyone, 

I'm experiencing an issue when using NVDA 2021.2 to interact with dropdowns/submenus in an Excel file (Office 365). I can press Alt + Down Arrow to expand the list, Down Arrow to the desired option, and then press Enter. However, if I then try to navigate in the sheet, NVDA stops talking. If I Alt + Tab to a different window and then Alt + Tab back to the Excel file, NVDA starts speaking again. Has anyone else experienced this issue? Are there any work arounds? I'm using Windows 10, version 21H1.

Thank you!

Heather 

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Nevzat Adil
Sent: Wednesday, 3 November 2021 1:59 AM
To: nvda@nvda.groups.io
Subject: [nvda] Language issue

Hi group,

Recently I added additional languages by going to the control panel and French was one of them.

I am doing work on a MS Word form and NVDA speaks french although my choice in both NVDA and the language choice under Control Panel is English.

The strange thing is that when I opened another Word document, not a form, and typed sentences the result was in English.

I went back to languages under Control Panel and removed French.

But nothing changed. I still hear French in my MS Word form.

I would like to hear your take on this phenomenon and your ideas how to put it right.

Thanking you in advance for your contributions.

Nevzat

--

Nevzat Adil

Library of Congress Certified

Literary Braille Proofreader

C: 512 502 4403

e-mail: nevzatadil@...

Facebook: m.facebook.com/LiteraryBrailleProofreader

Yes I am

2021-11-02 14:24 GMT +02:00, Eduardo Fermiano Luccas <25102008luccas@...>:
> are you using windows 10?
>
> Em ter., 2 de nov. de 2021 às 08:21, Margus Ojaots
> <margus.ojaots@...>
> escreveu:
>
>> Hello. So i tried to use OCR  for an app, when i pressed caps lock +r,
>> it didn't open the OCR window ven though screen curtain was turned
>> off. What could be the problem?
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>

On Nov 2, 2021, at 5:35 AM, Chris Mullins <cjmullins29@...> wrote:



Hi

Below is a link to a site giving details of alternative NVDA Remote relay servers, so you could set the Host to the one nearest your location to reduce any lag in the connection.

 

https://nvra.io/

 

It is advisable to ensure you use the same keyboard layout on both machines. 

 

The settings in the Connect dialog for the machines should be:

 

1^st Control: Client (on both machines)

2^nd Control: Laptop= “Control another machine”, Desktop=”Allow machine to be Controlled”

Host: nvdaremote.com or closer relay server

Key: Same key on both machines

Tab to OK and press enter.

 

Just because NVDA Remote connects to the relay server, does not necessarily mean the two computers can connect because there may be errors in the connection details.  The details given above, if followed correctly, should ensure you can successfully connect your computers.

 

On the Desktop computer, press NVDA+n followed by t, e, o to open the Remote Options menu and ensure “Auto connect to control server” is checked, then exit this menu.  Press NVDA+Control+n to restart NVDA and ensure the remote connection takes place.  You can verify this by pressing NVDA+n followed by t, e.  If the connect option at the top of the menu is unavailable, you have connected to the remote server. 

 

Cheers

Chris

 

 

Sent from Mail for Windows

 

From: Saylor Cooper
Sent: 02 November 2021 04:59
To: nvda@nvda.groups.io
Subject: [nvda] Controlling my desktop with NVDA remote from my laptop

 

Hello, I’m having problems connecting to my desktop from my laptop using NVDA remote. On my desktop, to set everything up I went to the NVDA menu, tools, remote, options, checked auto connect to server on STARZ up, use remote control server radio button, allow this machine to be controlled radio button. Then I created my host: Saylor‘s desktop, then created my key. On my laptop, I went to NVDA menu, tools, remote, connect, client, control a remote machine. I entered the host: Saylor‘s desktop, then my key and I get an error unable to connect to the remote computer. How long does my key have to because it is six digits. I also just tried putting in the host nvdaremote.com and then my key which would then connect however, once I pressed F11 and then it is controlling the remote machine, I can’t really control it because I tried to press the windows key and arrow keys and nothing. What can I do to fix this?

 

Saylor Cooper

 

 

 

 

are you using windows 10?

Em ter., 2 de nov. de 2021 às 08:21, Margus Ojaots
<margus.ojaots@...>
escreveu:

Hello. So i tried to use OCR for an app, when i pressed caps lock +r,
it didn't open the OCR window ven though screen curtain was turned
off. What could be the problem?

Hello. So i tried to use OCR  for an app, when i pressed caps lock +r,
it didn't open the OCR window ven though screen curtain was turned
off. What could be the problem?

Hello, I’m having problems connecting to my desktop from my laptop using NVDA remote. On my desktop, to set everything up I went to the NVDA menu, tools, remote, options, checked auto connect to server on STARZ up, use remote control server radio button, allow this machine to be controlled radio button. Then I created my host: Saylor‘s desktop, then created my key. On my laptop, I went to NVDA menu, tools, remote, connect, client, control a remote machine. I entered the host: Saylor‘s desktop, then my key and I get an error unable to connect to the remote computer. How long does my key have to because it is six digits. I also just tried putting in the host nvdaremote.com and then my key which would then connect however, once I pressed F11 and then it is controlling the remote machine, I can’t really control it because I tried to press the windows key and arrow keys and nothing. What can I do to fix this?

Saylor Cooper

Richard,

I won’t stop you from explaining the procedure if that’s what you want to do. However, section 12.4 of the NVDA users guide documents this feature. This is true in beta 1 of version 2021.3. Press the NVDA key with the letter N to open the manual, then go to the Help submenu where the user guide is located.

Yes, you just make a voice profile for that program.

If your not sure how to do it.

I can run you through it.

Thanks,

Rich

Hello all,

I may have asked this before but forgive if this is a repeat broadcast!.

On one of my desktop pcs I use k1000 for scanning documents.

I realise, of course I can press caps lock and s to turn speech off but is there a way of making me a lazy old man and get speech to turn off automatically when using k1000 then turning it off when closing the program.

Kind regards,

Dennis huckle.

Hi group,
   Running NVDA 2020.4. I'm have trouble getting my Code Factory add-on to work again. My notes may be out of date so hopefully someone here can assist.

   I've had to restore my Windows VM and somewhere along the way NVDA went back to the default voice. Thanks much.

From E.T.'s Keyboard...
"Those who make peaceful revolution impossible
will make violent revolution inevitable."
 --John F. Kennedy
My e-Mail:
Ancient.Aliens@...

Yes, you just make a voice profile for that program.

If your not sure how to do it.

I can run you through it.

Thanks,

Rich

Hello all,

I may have asked this before but forgive if this is a repeat broadcast!.

On one of my desktop pcs I use k1000 for scanning documents.

I realise, of course I can press caps lock and s to turn speech off but is there a way of making me a lazy old man and get speech to turn off automatically when using k1000 then turning it off when closing the program.

Kind regards,

Dennis huckle.

--