Date   

Re: a very question about anti spyware programs and very critical issue for me!

Brian's Mail list account BY <bglists@...>
 

Yes should have, but often many do not have such a luxury. Most of my audio is also on several computers,but I'm warming to a separate drive myself.
Having said that, I have not seen anything come into my system that is bad which has not been due to me being less than attentive. Luckily thus far they have only been key loggers attempts at Trojans jumped on by the Windows Defender etc. I also do a complete scan with a stand alone product every so often just in case.
there are some very nasty folk about.
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Gene" <gsasner@...>
To: <nvda@nvda.groups.io>
Sent: Wednesday, September 28, 2016 1:54 PM
Subject: Re: [nvda] a very question about anti spyware programs and very critical issue for me!


The Windows firewall is adequate, though you may want to run something else. Ransomware is spread in the ways malware is generally spread. A firewall will not stop you from getting it. the question is, what did you do to get it in the first place and the other point is, you should have all files you don't want to loose backed up and stored somewhere not connected to your computer such as on an external drive not attached to your computer except when in use.

Gene
----- Original Message -----

From: nasrin khaksar
Sent: Wednesday, September 28, 2016 6:48 AM
To: nvda@nvda.groups.io
Subject: [nvda] a very question about anti spyware programs and very critical issue for me!


hello every one.
two weeks ago, my computer files were incrypted and now, i lost most
of my valuable files and informations.
i have now many readme files that require me to buy the decrypter
software and my personal product key.

this ransomware is called cerber3.
it changed the name and extensions of my files, to the strange letter
and numbers with cerber3 extention.
could you please guide me which firewall can i use?

i need a free program, accessible with nvda, using less system
resources, without reducing the speed of my system and reading of
nvda, capability of hiding my Ip and informations from hackers, saving
my data from unwanted changes, incryptions etc.

i realy need your help and i am very worried for my data.
i use windows xp, but i want a software that supports all versions of
windows including 32 and 64 bit versions!
thanks extremely for your help and God bless you all.


--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
best website for studying islamic book in different languages
al-islam.org


Re: Amazon web site

Brian's Mail list account BY <bglists@...>
 

I was just pointing out that the way I used it has now had to change. This is the one thing that irks me about sites. They cannot leave them alone, and whereas sighted users see the new layout, trying to guess this when you are a blind user is not that easy. I'll have a go later with s, but most other sites use landmarks and headings which generally seem to be fr easier to use.
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Gene" <gsasner@...>
To: <nvda@nvda.groups.io>
Sent: Wednesday, September 28, 2016 3:01 PM
Subject: Re: [nvda] Amazon web site


On the home page or a product page. Please send a link if you are using a specific page so we know we are looking at the same page. What about the find command? there may be something you can search for immediately before the main information that is displayed on all such pages. What about s for separator? Amazon product pages have separators between sections.

Gene
----- Original Message -----

From: Brian's Mail list account
Sent: Wednesday, September 28, 2016 8:04 AM
To: nvda@nvda.groups.io
Subject: [nvda] Amazon web site


I have not had the need to use it in a while, but I'm sure before one could
use the header button to get to the main info and zip past all the search
annd departments etc, but now it seems there is no convenient header to go
to, one ends up tabbing or a mixture of l k and h to get to where you want,
occasionally getting stuck in a weird edit field you need to tab out of.
They have obviously changed someething as my muscle memory way does not
work any more.

Anyone?
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.


Re: Amazon web site

Brian's Mail list account BY <bglists@...>
 

I have tried that but every time I do anything I end up back on the main site again.
It almost works, its just that they seem to be a bit hit and miss with headers, landmarks and such.
Not enough quality control obviously.
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Louis Maher" <ljmaher@...>
To: <nvda@nvda.groups.io>
Sent: Wednesday, September 28, 2016 4:56 PM
Subject: Re: [nvda] Amazon web site


Folks,



The easiest way to use the Amazon site is to use the Amazon access site

<https://www.amazon.com/gp/aw/ref=mw_access>
https://www.amazon.com/gp/aw/ref=mw_access



There is a search field about two lines down from the top of the page. It
searches all of the amazon site. If you hit an item that says it is not
available for purchase on the amazon access site, just open the link in
another tab and proceed.



I have heard one report that the purchase buttons could not be activated in
Internet Explorer 11, but they can be activated in Firefox.







Regards

Louis Maher

Phone: 713-444-7838

E-mail: ljmaher@...



From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Wednesday, September 28, 2016 9:02 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Amazon web site



On the home page or a product page. Please send a link if you are using a
specific page so we know we are looking at the same page. What about the
find command? there may be something you can search for immediately before
the main information that is displayed on all such pages. What about s for
separator? Amazon product pages have separators between sections.



Gene

----- Original Message -----

From: Brian's Mail list account <mailto:bglists@...>

Sent: Wednesday, September 28, 2016 8:04 AM

To: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>

Subject: [nvda] Amazon web site



I have not had the need to use it in a while, but I'm sure before one could
use the header button to get to the main info and zip past all the search
annd departments etc, but now it seems there is no convenient header to go
to, one ends up tabbing or a mixture of l k and h to get to where you want,
occasionally getting stuck in a weird edit field you need to tab out of.
They have obviously changed someething as my muscle memory way does not
work any more.

Anyone?
Brian

bglists@... <mailto:bglists@...>
Sent via blueyonder.
Please address personal email to:-
briang1@... <mailto:briang1@...> , putting 'Brian
Gaff'
in the display name field.







Re: Announcing ObjPad add-on, a more intuitive way to navigate between screen elements

Ralf Kefferpuetz
 

An addon can’t be better as what the screen reader itself can provide, but this addon makes it easier to handle the screen reader functions..

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Dejan Ristic
Sent: Mittwoch, 28. September 2016 19:16
To: nvda@nvda.groups.io
Subject: Re: [nvda] Announcing ObjPad add-on, a more intuitive way to navigate between screen elements

 

I have not used the add-on yet. Will it make some applications more NVDA-accessible? For instance, will VLC Media Player be more accessible with it? If so, it is great.

 

On 9/28/2016 3:18 PM, Ralf Kefferpuetz wrote:

Hi Joseph,

 

this is very niceley done and useful. I like to see the scan mode feature in NVDA.

 

Regards and many thanks,

  Ralf

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Joseph Lee
Sent: Montag, 26. September 2016 19:12
To: nvda@nvda.groups.io
Subject: [nvda] Announcing ObjPad add-on, a more intuitive way to navigate between screen elements

 

Hi everyone,

 

One of the strengths of NVDA is superb support for object navigation. However, there were requests from people who wanted a more intuitive way to do this, including using just the arrow keys to navigate between objects, and since early this year, a way for NVDA to have something similar to scan mode in Narrator (Windows 10 version 1607). The wait is over: introducing ObjPad, an add-on that introduces more intuitive object navigation facility and basic implementation of scan mode feature, along with possibilities such as one key command to move focus to the current navigator object and more planned for the future.

 

The add-on (for now, a development snapshot) can be found at:

http://addons.nvda-project.org/addons/objPad.en.html

 

Feedback is appreciated.

Cheers,

Joseph




Re: Announcing ObjPad add-on, a more intuitive way to navigate between screen elements

Dejan Ristic
 

I have not used the add-on yet. Will it make some applications more NVDA-accessible? For instance, will VLC Media Player be more accessible with it? If so, it is great.


On 9/28/2016 3:18 PM, Ralf Kefferpuetz wrote:

Hi Joseph,

 

this is very niceley done and useful. I like to see the scan mode feature in NVDA.

 

Regards and many thanks,

  Ralf

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Joseph Lee
Sent: Montag, 26. September 2016 19:12
To: nvda@nvda.groups.io
Subject: [nvda] Announcing ObjPad add-on, a more intuitive way to navigate between screen elements

 

Hi everyone,

 

One of the strengths of NVDA is superb support for object navigation. However, there were requests from people who wanted a more intuitive way to do this, including using just the arrow keys to navigate between objects, and since early this year, a way for NVDA to have something similar to scan mode in Narrator (Windows 10 version 1607). The wait is over: introducing ObjPad, an add-on that introduces more intuitive object navigation facility and basic implementation of scan mode feature, along with possibilities such as one key command to move focus to the current navigator object and more planned for the future.

 

The add-on (for now, a development snapshot) can be found at:

http://addons.nvda-project.org/addons/objPad.en.html

 

Feedback is appreciated.

Cheers,

Joseph





A very welcome discovery

Mallard
 

Hello all,

I've just updated NVDA to today's Next snapshot and, quite by chance, I've discovered that braille is back in Adobe Digital Editions.

I can't tell whether this happened already in some previous snapshots. What I know is that it now works, and I want to thanks the devs for fixing this unpleasant issue.

Whatever you people did, it did it! (smile).

Ciao,
Ollie


Re: Amazon web site

Louis Maher <ljmaher@...>
 

Folks,

 

The easiest way to use the Amazon site is to use the Amazon access site

https://www.amazon.com/gp/aw/ref=mw_access

 

There is a search field about two lines down from the top of the page.  It searches all of the amazon site.  If you hit an item that says it is not available for purchase on the amazon access site, just open the link in another tab and proceed. 

 

I have heard one report that the purchase buttons could not be activated in Internet Explorer 11, but they can be activated in Firefox.

 

 

 

Regards

Louis Maher

Phone: 713-444-7838

E-mail: ljmaher@...

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Wednesday, September 28, 2016 9:02 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Amazon web site

 

On the home page or a product page.  Please send a link if you are using a specific page so we know we are looking at the same page.  What about the find command?  there may be something you can search for immediately before the main information that is displayed on all such pages.  What about s for separator?  Amazon product pages have separators between sections.

 

Gene

----- Original Message -----

Sent: Wednesday, September 28, 2016 8:04 AM

Subject: [nvda] Amazon web site

 

I have not had the need to use it in a while, but I'm sure before one could
use the header button to get to the main info and zip past all the search
annd departments etc, but now it seems there is no convenient header to go
to, one ends up tabbing or a mixture of l k and h to get to where you want,
occasionally getting stuck in a weird edit field you need to tab out of.
 They have obviously changed someething as my muscle memory  way does not
work any more.

 Anyone?
 Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.



Re: a very question about anti spyware programs and very critical issue for me!

V Stuart Foote
 

Nasrin,


Was sorry to hear that you got clobbered by Cerber3 ransom ware. Suspect you picked it up via Its usual delivery as an exploit from a linked page from email message or when following a web page link.


The NoScript plugin for Firefox is pretty good for preventing delivery of the Exploit of the malware to your computer--just checked and it seems fully accessible in NVDA

Here is the link to the project page:

https://noscript.net

There is an install button on upper left edge, can be reached via keyboard, labeled:  "Install NoScript, it's Free and Open Source" -- it is a link to a Firefox .oxt extension and will place a program button on the main toolbar next to the Home button. The default mode should function well without interfering too much with your web browsing--but you will find occassion when you need to allow "exceptions" to permit pages/content you know to be OK to run. That can become a bit annoying, but if you "allow" your usual sites and applications the annoyance goes away pretty quickly.


Unfortunately on computers already infected and with encrypted files they can not be recovered--the encryption can not be reliably reversed--and I would not trust the paying a ransom to deliver a viable decryption string. So a restore from a backup is the only safe option, in other words make and keep backups current.


For protection targeted against "ransomware" encryption there are several specific solutions--but I have not checked any of them for Accessibility with NVDA

Malwarebytes has an ongoing beta of its Anti-Ransomware project -- here:  https://forums.malwarebytes.org/topic/177751-introducing-malwarebytes-anti-ransomware-beta

HitMan Pro has its Alert active anti-Exploit product -- http://www.surfright.nl/en/products

TrendMicro's  Maximum security block encryption -- http://www.trendmicro.com/us/home/products/software/maximum-security/index.html


Good luck!


Stuart





Re: Amazon web site

Gene
 

On the home page or a product page.  Please send a link if you are using a specific page so we know we are looking at the same page.  What about the find command?  there may be something you can search for immediately before the main information that is displayed on all such pages.  What about s for separator?  Amazon product pages have separators between sections.
 
Gene

----- Original Message -----
Sent: Wednesday, September 28, 2016 8:04 AM
Subject: [nvda] Amazon web site

I have not had the need to use it in a while, but I'm sure before one could
use the header button to get to the main info and zip past all the search
annd departments etc, but now it seems there is no convenient header to go
to, one ends up tabbing or a mixture of l k and h to get to where you want,
occasionally getting stuck in a weird edit field you need to tab out of.
 They have obviously changed someething as my muscle memory  way does not
work any more.

 Anyone?
 Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.




Re: a very question about anti spyware programs and very critical issue for me!

Gene
 

I doubt there is any way to keep anything from running automatically except to not allow scripts to run.  An ad blocker offers protection.  I don't know enough about the subject to know how much, but it may be quite a bit.  Nor do I have the technical knowledge to know if a firewall will stop the ransomeware from contacting its server to begin encryption.  In addition, I read about a new ransomware that doesn't need to contact the server to begin encryption.  If you want to use no Script (spelling) to block scripts that is one option.  If you want to turn off scripts in Firefox, that is another.  But you will still want to use scripts on some sites.  Some forms can't be submitted without scripts being allowed.  Most audio can't be streamed without scripts being allowed.  And there are many other sites that won't work fully without scripts. 
 
Many sites may be useable for how you want to use them with scripts off but if your use of the Internet is at all typical, many won't.  The most simple thing to do might be to have two copies of Firefox on your machine, a portable version and an installed version or two separate portable versions.  You can have scripts not allowed in one copy and scripts allowed in the other.  Then you can switch from copy to copy without changing settings repeatedly. 
 
Gene

----- Original Message -----
Sent: Wednesday, September 28, 2016 8:13 AM
Subject: Re: [nvda] a very question about anti spyware programs and very critical issue for me!

hi geen and brian.
thanks for your answers.
i think some pup up automaticly became active and infected my system.
i am shure that i dont open eligal sites, attachment of spam emails etc.

did you test comodo firewall or zonealarm free firewall to see?
i forgot to say i also want some softwares that blocks all popup from
my firefox.

On 9/28/16, Gene <gsasner@...> wrote:
> The Windows firewall is adequate, though you may want to run something else.
>  Ransomware is spread in the ways malware is generally spread.  A firewall
> will not stop you from getting it.  the question is, what did you do to get
> it in the first place and the other point is, you should have all files you
> don't want to loose backed up and stored somewhere not connected to your
> computer such as on an external drive not attached to your computer except
> when in use.
>
> Gene
> ----- Original Message -----
>
> From: nasrin khaksar
> Sent: Wednesday, September 28, 2016 6:48 AM
> To: nvda@nvda.groups.io
> Subject: [nvda] a very question about anti spyware programs and very
> critical issue for me!
>
>
> hello every one.
> two weeks ago, my computer files were incrypted and now, i lost most
> of my valuable files and informations.
> i have now many readme files that require me to buy the decrypter
> software and my personal product key.
>
> this ransomware is called cerber3.
> it changed the name and extensions of my files, to the strange letter
> and numbers with cerber3 extention.
> could you please guide me which firewall can i use?
>
> i need a free program, accessible with nvda, using less system
> resources, without reducing the speed of my system and reading of
> nvda, capability of hiding my Ip and informations from hackers, saving
> my data from unwanted changes, incryptions etc.
>
> i realy need your help and i am very worried for my data.
> i use windows xp, but i want a software that supports all versions of
> windows including 32 and 64 bit versions!
> thanks extremely for your help and God bless you all.
>
>
> --
> we have not sent you but as a mercy to the creation.
> holy quran, chapter 21, verse 107.
> best website for studying islamic book in different languages
> al-islam.org
>
>
>


--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
best website for studying islamic book in different languages
al-islam.org



Re: Announcing ObjPad add-on, a more intuitive way to navigate between screen elements

Ralf Kefferpuetz
 

Hi Joseph,

 

this is very niceley done and useful. I like to see the scan mode feature in NVDA.

 

Regards and many thanks,

  Ralf

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Joseph Lee
Sent: Montag, 26. September 2016 19:12
To: nvda@nvda.groups.io
Subject: [nvda] Announcing ObjPad add-on, a more intuitive way to navigate between screen elements

 

Hi everyone,

 

One of the strengths of NVDA is superb support for object navigation. However, there were requests from people who wanted a more intuitive way to do this, including using just the arrow keys to navigate between objects, and since early this year, a way for NVDA to have something similar to scan mode in Narrator (Windows 10 version 1607). The wait is over: introducing ObjPad, an add-on that introduces more intuitive object navigation facility and basic implementation of scan mode feature, along with possibilities such as one key command to move focus to the current navigator object and more planned for the future.

 

The add-on (for now, a development snapshot) can be found at:

http://addons.nvda-project.org/addons/objPad.en.html

 

Feedback is appreciated.

Cheers,

Joseph


XLP no speech

Maurice Bell <itma-7@...>
 

Hello all,


Thanks for your suggestions, but I have had no internet for 3 days, so
have unable to advise you I now have speech.


For some reason the new install, after removing NVDA, installed with no
speech checked.


While trying Matt's suggestion, discovered that Super Nova will read the
NVDA menu when loaded, so foundout what the problem was.


My only problem now is, that I only have the Microsoft voice for Narrator.


Thanks, Maurice.


Re: a very question about anti spyware programs and very critical issue for me!

 

hi geen and brian.
thanks for your answers.
i think some pup up automaticly became active and infected my system.
i am shure that i dont open eligal sites, attachment of spam emails etc.

did you test comodo firewall or zonealarm free firewall to see?
i forgot to say i also want some softwares that blocks all popup from
my firefox.

On 9/28/16, Gene <gsasner@...> wrote:
The Windows firewall is adequate, though you may want to run something else.
Ransomware is spread in the ways malware is generally spread. A firewall
will not stop you from getting it. the question is, what did you do to get
it in the first place and the other point is, you should have all files you
don't want to loose backed up and stored somewhere not connected to your
computer such as on an external drive not attached to your computer except
when in use.

Gene
----- Original Message -----

From: nasrin khaksar
Sent: Wednesday, September 28, 2016 6:48 AM
To: nvda@nvda.groups.io
Subject: [nvda] a very question about anti spyware programs and very
critical issue for me!


hello every one.
two weeks ago, my computer files were incrypted and now, i lost most
of my valuable files and informations.
i have now many readme files that require me to buy the decrypter
software and my personal product key.

this ransomware is called cerber3.
it changed the name and extensions of my files, to the strange letter
and numbers with cerber3 extention.
could you please guide me which firewall can i use?

i need a free program, accessible with nvda, using less system
resources, without reducing the speed of my system and reading of
nvda, capability of hiding my Ip and informations from hackers, saving
my data from unwanted changes, incryptions etc.

i realy need your help and i am very worried for my data.
i use windows xp, but i want a software that supports all versions of
windows including 32 and 64 bit versions!
thanks extremely for your help and God bless you all.


--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
best website for studying islamic book in different languages
al-islam.org


--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
best website for studying islamic book in different languages
al-islam.org


Amazon web site

Brian's Mail list account BY <bglists@...>
 

I have not had the need to use it in a while, but I'm sure before one could use the header button to get to the main info and zip past all the search annd departments etc, but now it seems there is no convenient header to go to, one ends up tabbing or a mixture of l k and h to get to where you want, occasionally getting stuck in a weird edit field you need to tab out of.
They have obviously changed someething as my muscle memory way does not work any more.

Anyone?
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.


Re: a very question about anti spyware programs and very critical issue for me!

Gene
 

The Windows firewall is adequate, though you may want to run something else.  Ransomware is spread in the ways malware is generally spread.  A firewall will not stop you from getting it.  the question is, what did you do to get it in the first place and the other point is, you should have all files you don't want to loose backed up and stored somewhere not connected to your computer such as on an external drive not attached to your computer except when in use. 
 
Gene

----- Original Message -----
Sent: Wednesday, September 28, 2016 6:48 AM
Subject: [nvda] a very question about anti spyware programs and very critical issue for me!

hello every one.
two weeks ago, my computer files were incrypted and now, i lost most
of my valuable files and informations.
i have now many readme files that require me to buy the decrypter
software and my personal product key.

this ransomware is called cerber3.
it changed the name and extensions of my files, to the strange letter
and numbers with cerber3 extention.
could you please guide me which firewall can i use?

i need a free program, accessible with nvda, using less system
resources, without reducing the speed of my system and reading of
nvda, capability of hiding my Ip and informations from hackers, saving
my data from unwanted changes, incryptions etc.

i realy need your help and i am very worried for my data.
i use windows xp, but i want a software that supports all versions of
windows including 32 and 64 bit versions!
thanks extremely for your help and God bless you all.


--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
best website for studying islamic book in different languages
al-islam.org



Re: a very question about anti spyware programs and very critical issue for me!

Brian's Mail list account BY <bglists@...>
 

Ho did this software arrive on your system. Was it one of those pop up download things that sometimes happen on normal web sites and a bit of a distraction makes you click the install button.
I've never had one of these myself since having ad block software on my browsers, but now you have it, unless somebody knows how to hack it, I'm sorry to say, you are probably stuck with it .
Best plan I can say is to go back to the last backup before this happened and then try to get the files from the original sources that you are missing.
As a matter of interest is this a known encryption program which is legitimate or just somebody's ransom ware.
I suspect the latter, but if not and they are approachable most companies will let you have a one shot reverser utility to back out.

Other than that most of the things you need to protect yourself are between your ears and not in software, I have found, sometimes to my own cost.
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "nasrin khaksar" <nasrinkhaksar3@...>
To: <nvda@nvda.groups.io>
Sent: Wednesday, September 28, 2016 12:48 PM
Subject: [nvda] a very question about anti spyware programs and very critical issue for me!


hello every one.
two weeks ago, my computer files were incrypted and now, i lost most
of my valuable files and informations.
i have now many readme files that require me to buy the decrypter
software and my personal product key.

this ransomware is called cerber3.
it changed the name and extensions of my files, to the strange letter
and numbers with cerber3 extention.
could you please guide me which firewall can i use?

i need a free program, accessible with nvda, using less system
resources, without reducing the speed of my system and reading of
nvda, capability of hiding my Ip and informations from hackers, saving
my data from unwanted changes, incryptions etc.

i realy need your help and i am very worried for my data.
i use windows xp, but i want a software that supports all versions of
windows including 32 and 64 bit versions!
thanks extremely for your help and God bless you all.


--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
best website for studying islamic book in different languages
al-islam.org


a very question about anti spyware programs and very critical issue for me!

 

hello every one.
two weeks ago, my computer files were incrypted and now, i lost most
of my valuable files and informations.
i have now many readme files that require me to buy the decrypter
software and my personal product key.

this ransomware is called cerber3.
it changed the name and extensions of my files, to the strange letter
and numbers with cerber3 extention.
could you please guide me which firewall can i use?

i need a free program, accessible with nvda, using less system
resources, without reducing the speed of my system and reading of
nvda, capability of hiding my Ip and informations from hackers, saving
my data from unwanted changes, incryptions etc.

i realy need your help and i am very worried for my data.
i use windows xp, but i want a software that supports all versions of
windows including 32 and 64 bit versions!
thanks extremely for your help and God bless you all.


--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
best website for studying islamic book in different languages
al-islam.org


obj pad addon

Josh Kennedy
 

hi

scan mode is where you can just press up and down arrow keys to navigate through all possible objects on screen and hit space bar to activate them.




--
mozilla thunderbird email client


Re: NVDA remote access.

Igor Kaplan
 

The server is here:
https://github.com/Technow-es/NVDARemoteServer
The instructions in README file. Yes, you can run it under windows. Basicly
you need the python and some additional python packages, the readme file
contain all details.

All the best.

-Igor

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Shaun
Everiss
Sent: Wednesday, September 28, 2016 12:30 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote access.

Where do you get the server?
and can you run this on windows, what is needed to run it.



On 28/09/2016 11:57 a.m., Igor Kaplan wrote:
Hi Chris,

Thanks so much for researching this issue. Well, if it works on your
side,
then it is something in my configuration.
To clear all douts, the autoconnect:
Nvda menu (insert+N), tools, remote access, options autoconnect on startup
need to be check providing the host name and access key.
As I mentioned, I see, nvda reconnects after the remote computer goes to
the lock screen, the connect menu under remote access is unavailable and
disconnect menu is available to break the connection.
I am running my own NVDA remote server on home laptop and connecting to
it.

I'll investigate more and will look at NVDA log.

Thanks a lot.

-Igor

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Chris
Mullins
Sent: Tuesday, September 27, 2016 1:02 PM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA remote access.

Igor
On my last post, please ignore "1. The W10 machine did not output any
speech
locally but I can hear everything at the remote end. unlike when I connect
to my friends machine which speaks locally and I can hear everything at
the
remote end". I hadn't realised I had a headphone extension wire plugged
into the machine which muted the sound.

I have now done a test logging out and into an account over a remote
connection and it works perfectly. I first had to re-copy my settings
over
to the system settings having first set the autoconnect parameters. Just
to
be sure we are on the same page, could you describe your understanding of
'autoconnect parameters'?

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Chris
Mullins
Sent: 27 September 2016 17:12
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote access.

Hi Igor
If you set logging to 'Info', you can see where remote connections occur.
However, I've tried to replicate your set-up and run some tests. To
simulate your work machine, I have used a windows 10 machine with nvda
2016.3 installed and have set remote to autoconnect. To simulate your
home
machine, I have used an old XP laptop with nvda2014.4 installed and used
the remote dialog to manually connect it as the controlling computer to my
Windows 10 machine. It gave the long sound when I connected to the already
logged-in account on the W10 machine. I could access the W10 machine
perfectly and successfully locked the screen and logged back in again,
maintaining the remote connection.

I regularly connect to a friend's machine but we use the remote dialog to
specify the host and key parameters butthis is the first time I've used
autoconnect and I noticed a couple of differences between the connection
methods.
1. The W10 machine did not output any speech locally but I can hear
everything at the remote end. unlike when I connect to my friends machine
which speaks locally and I can hear everything at the remote end.
2. When I lock the screen, I don't hear the descending chime of nvda exit
or
the ascending chime of NVDA load when I unlock my account with the log-in
password. logging in/out of an account I suspect behaves differently and
I
will test this behaviour next.

With the behavior in 2 above in mind, could you leve your work machine on
the lock screen rather than the log-in screen to enable remote access or
are
there group policies in effect which would prevent you doing this?

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Igor
Kaplan
Sent: 27 September 2016 10:55
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote access.

Yes, I do, and it shows "connected" on the lock screen.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Chris
Mullins
Sent: Tuesday, September 27, 2016 5:44 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote access.

And you definitely have autoconnect enabled?

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Igor
Kaplan
Sent: 26 September 2016 23:46
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote access.

Well, verified today, my configs are definitely used on the security
screens
and after the security screen is on the status of remote access plugin is
"connected", however no access at all.
However, if I go to the Remote Access menu, disconnect and then connect
again, right on the lock screen, it works perfectly. It continue to work
after the computer is unlocked, however again stops after the computer is
locked. So, looks like the NVDA attempts to reconnect on the security
screen, I even hear the long beep, the indication of connection, however
there is probably something, which does not let NVDA to connect properly.
I wonder, if connections attempts are recorded to the NVDA log, I could
probably attempt to debug sometime.

All the best.

Igor.
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Chris
Mullins
Sent: Monday, September 26, 2016 5:55 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote access.

Go to the NVDA menu Preferences/General, there is a button labelled 'Use
current settings on log-on and other secure screens' to copy them over.
You
will require admin priviledges to perform this routine.

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Antony
Stone
Sent: 25 September 2016 23:59
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote access.

How does one "copy this set-up to the secure screen settings"?

Antony.

On Monday 26 September 2016 at 00:50:58, Chris Mullins wrote:

The way I understand it is that when your work computer drops into the
secure screen it drops your user NVDA settings and loads the secure
screen NVDA settings. So if you have the remote add-on with
auto-connect set for your user NVDA settings and copy this set-up to
the secure screen settings, your work computer will drop its remote
connection when the secure screen appears but immediately re-establish
it when the secure screen NVDA settings are loaded. Similarly, when
you log into your work computer, the remote connection will drop again
and reconnect when your user NVDA settings are loaded. Your local
computer shows as being connected but this only indicates that it is
connected to the host server, not your work computer.

Cheers

Chris
--
Schrödinger's rule of data: the condition of any backup is unknown until a
restore is attempted.

Please reply to the
list;
please *don't* CC
me.




























Re: NVDA remote access.

 

Where do you get the server?
and can you run this on windows, what is needed to run it.

On 28/09/2016 11:57 a.m., Igor Kaplan wrote:
Hi Chris,

Thanks so much for researching this issue. Well, if it works on your side,
then it is something in my configuration.
To clear all douts, the autoconnect:
Nvda menu (insert+N), tools, remote access, options autoconnect on startup
need to be check providing the host name and access key.
As I mentioned, I see, nvda reconnects after the remote computer goes to
the lock screen, the connect menu under remote access is unavailable and
disconnect menu is available to break the connection.
I am running my own NVDA remote server on home laptop and connecting to
it.

I'll investigate more and will look at NVDA log.

Thanks a lot.

-Igor

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Chris
Mullins
Sent: Tuesday, September 27, 2016 1:02 PM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA remote access.

Igor
On my last post, please ignore "1. The W10 machine did not output any speech
locally but I can hear everything at the remote end. unlike when I connect
to my friends machine which speaks locally and I can hear everything at the
remote end". I hadn't realised I had a headphone extension wire plugged
into the machine which muted the sound.

I have now done a test logging out and into an account over a remote
connection and it works perfectly. I first had to re-copy my settings over
to the system settings having first set the autoconnect parameters. Just to
be sure we are on the same page, could you describe your understanding of
'autoconnect parameters'?

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Chris
Mullins
Sent: 27 September 2016 17:12
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote access.

Hi Igor
If you set logging to 'Info', you can see where remote connections occur.
However, I've tried to replicate your set-up and run some tests. To
simulate your work machine, I have used a windows 10 machine with nvda
2016.3 installed and have set remote to autoconnect. To simulate your home
machine, I have used an old XP laptop with nvda2014.4 installed and used
the remote dialog to manually connect it as the controlling computer to my
Windows 10 machine. It gave the long sound when I connected to the already
logged-in account on the W10 machine. I could access the W10 machine
perfectly and successfully locked the screen and logged back in again,
maintaining the remote connection.

I regularly connect to a friend's machine but we use the remote dialog to
specify the host and key parameters butthis is the first time I've used
autoconnect and I noticed a couple of differences between the connection
methods.
1. The W10 machine did not output any speech locally but I can hear
everything at the remote end. unlike when I connect to my friends machine
which speaks locally and I can hear everything at the remote end.
2. When I lock the screen, I don't hear the descending chime of nvda exit or
the ascending chime of NVDA load when I unlock my account with the log-in
password. logging in/out of an account I suspect behaves differently and I
will test this behaviour next.

With the behavior in 2 above in mind, could you leve your work machine on
the lock screen rather than the log-in screen to enable remote access or are
there group policies in effect which would prevent you doing this?

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Igor
Kaplan
Sent: 27 September 2016 10:55
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote access.

Yes, I do, and it shows "connected" on the lock screen.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Chris
Mullins
Sent: Tuesday, September 27, 2016 5:44 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote access.

And you definitely have autoconnect enabled?

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Igor
Kaplan
Sent: 26 September 2016 23:46
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote access.

Well, verified today, my configs are definitely used on the security screens
and after the security screen is on the status of remote access plugin is
"connected", however no access at all.
However, if I go to the Remote Access menu, disconnect and then connect
again, right on the lock screen, it works perfectly. It continue to work
after the computer is unlocked, however again stops after the computer is
locked. So, looks like the NVDA attempts to reconnect on the security
screen, I even hear the long beep, the indication of connection, however
there is probably something, which does not let NVDA to connect properly.
I wonder, if connections attempts are recorded to the NVDA log, I could
probably attempt to debug sometime.

All the best.

Igor.
-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Chris
Mullins
Sent: Monday, September 26, 2016 5:55 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote access.

Go to the NVDA menu Preferences/General, there is a button labelled 'Use
current settings on log-on and other secure screens' to copy them over. You
will require admin priviledges to perform this routine.

Cheers
Chris

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Antony
Stone
Sent: 25 September 2016 23:59
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote access.

How does one "copy this set-up to the secure screen settings"?

Antony.

On Monday 26 September 2016 at 00:50:58, Chris Mullins wrote:

The way I understand it is that when your work computer drops into the
secure screen it drops your user NVDA settings and loads the secure
screen NVDA settings. So if you have the remote add-on with
auto-connect set for your user NVDA settings and copy this set-up to
the secure screen settings, your work computer will drop its remote
connection when the secure screen appears but immediately re-establish
it when the secure screen NVDA settings are loaded. Similarly, when
you log into your work computer, the remote connection will drop again
and reconnect when your user NVDA settings are loaded. Your local
computer shows as being connected but this only indicates that it is
connected to the host server, not your work computer.

Cheers

Chris
--
Schrödinger's rule of data: the condition of any backup is unknown until a
restore is attempted.

Please reply to the list;
please *don't* CC
me.