Date   

Re: NVDA remote question help needed

Jackie
 

To check it, please go to NVDA menu, tools, then addon manager & see
if there are any in the list.

On 1/9/22, Charles Adkins <cadkins6739@...> wrote:
Don't think so, this has only been going on for a day or so.
On Jan 9, 2022, at 7:26 PM, Jackie <abletec@...> wrote:

Charles, do you have any addons installed, save for remote, on the
machine that's problematic?

On 1/9/22, Gene <gsasner@...> wrote:
Since it happens on one machine and since this seems to be an uncommon
or
very uncommon problem, I suspect there is a problem with the machine.
I’m
not saying there is something wrong with it, but perhaps it is running
something that causes the behavior;. You may need help that goes
beyond
the knowledge of the list. My question is whether there is any support
option to get help for obscure problems like this.

Gene
-----Original Message-----
From: Charles Adkins
Sent: Sunday, January 09, 2022 5:05 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote question help needed

Thanks, did not help, but I do have it narrowed down to one offending
machine. The numbers will not stop until I disconnect and it happens
whether
I'm controling remote or local.




On Jan 9, 2022, at 5:58 PM, Gene <gsasner@...> wrote:



While I doubt this will solve the problem, try turning off report
dynamic
content changes. It’s a toggle, NVDA 5, 5 on the main keyboard.

Gene
-----Original Message-----
From: Charles Adkins
Sent: Sunday, January 09, 2022 4:55 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote question help needed

?Anks s m*. Progress bars are not checked on either machine. I've
figured
out that it only happens on one work machine I connect to, but once
those
progress bars are being read, it continues to read them until I
disconnect
remote. Progress bars are not enabled on any machines I'm using. Numbers
read so fast I have to keep hitting the control key to stop speech to see
if
I'm controling local or remote machine. Not good when you're trying to
keep
a radio station on the air lol!!!! Thanks again.

Chuck
On Jan 9, 2022, at 4:55 PM, Jackie <abletec@...> wrote:
Sounds like perhaps you've got background progress bars enabled?
That's under object presentation > report background progress bars.

On 1/9/22, Christopher Duffley <christophernduffley@...> wrote:
I've never gotten this issue, so I have no idea. It's fine here on
both
10
and 11.

What exactly happens when the connection is established? Maybe delete
your
INI file in your NVDA folder and do it again?

Christopher Duffley

Host of Mission Possible Podcast
<http://www.missionpossiblepodcast.com/>

LINKS TO SUBSCRIBE:

iTunes
<https://itunes.apple.com/us/podcast/mission-possible-christopher/id1103092109?mt=2>
| Stitcher <http://www.stitcher.com/s?fid=88094&refid=stpr> | Google
Play
<https://goo.gl/app/playmusic?ibi=com.google.PlayMusic&isi=691797987&ius=googleplaymusic&link=https://play.google.com/music/m/Ik76dexklcprwnpuxbdr2s6bm3y?t=Mission_Possible_with_Christopher_Duffley>
| Follow Podcast On TuneIn And Listen To Latest Episode
<http://tunein.com/radio/Mission-Possible-With-Christopher-Duffley-p892505/>

LIKE/FOLLOW Me:

Facebook <http://facebook.com/christopherduffley> | Twitter
<http://twitter.com/chrisduffley> | YouTube
<http://youtube.com/christopherduffley> | Instagram
<http://instagram.com/christopherduffley>

On Jan 9, 2022, at 13:33, Charles Adkins <cadkins6739@...>
wrote:

Using the latest NVDA and latest remote add-on, for some reason when I
connect with another computer using the nvda remote server, I hear a
constant stream of numbers being spoken that keeps going until I
disconnect,
no matter what I do. Any suggestions would be very helpful. This
happens
with windows 7, 10, and 11. Thanks.












--
Subscribe to a WordPress for Newbies Mailing List by sending a message
to:
wp4newbs-request@... with 'subscribe' in the Subject field OR
by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com &
www.mysitesbeenhacked.com














--
Subscribe to a WordPress for Newbies Mailing List by sending a message
to:
wp4newbs-request@... with 'subscribe' in the Subject field OR
by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com &
www.mysitesbeenhacked.com








--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@... with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com


Re: NVDA remote question help needed

Charles Adkins <cadkins6739@...>
 

Don't think so, this has only been going on for a day or so.

On Jan 9, 2022, at 7:26 PM, Jackie <abletec@...> wrote:

Charles, do you have any addons installed, save for remote, on the
machine that's problematic?

On 1/9/22, Gene <gsasner@...> wrote:
Since it happens on one machine and since this seems to be an uncommon or
very uncommon problem, I suspect there is a problem with the machine. I’m
not saying there is something wrong with it, but perhaps it is running
something that causes the behavior;. You may need help that goes beyond
the knowledge of the list. My question is whether there is any support
option to get help for obscure problems like this.

Gene
-----Original Message-----
From: Charles Adkins
Sent: Sunday, January 09, 2022 5:05 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote question help needed

Thanks, did not help, but I do have it narrowed down to one offending
machine. The numbers will not stop until I disconnect and it happens whether
I'm controling remote or local.




On Jan 9, 2022, at 5:58 PM, Gene <gsasner@...> wrote:



While I doubt this will solve the problem, try turning off report dynamic
content changes. It’s a toggle, NVDA 5, 5 on the main keyboard.

Gene
-----Original Message-----
From: Charles Adkins
Sent: Sunday, January 09, 2022 4:55 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote question help needed

?Anks s m*. Progress bars are not checked on either machine. I've figured
out that it only happens on one work machine I connect to, but once those
progress bars are being read, it continues to read them until I disconnect
remote. Progress bars are not enabled on any machines I'm using. Numbers
read so fast I have to keep hitting the control key to stop speech to see if
I'm controling local or remote machine. Not good when you're trying to keep
a radio station on the air lol!!!! Thanks again.

Chuck
On Jan 9, 2022, at 4:55 PM, Jackie <abletec@...> wrote:
Sounds like perhaps you've got background progress bars enabled?
That's under object presentation > report background progress bars.

On 1/9/22, Christopher Duffley <christophernduffley@...> wrote:
I've never gotten this issue, so I have no idea. It's fine here on both
10
and 11.

What exactly happens when the connection is established? Maybe delete
your
INI file in your NVDA folder and do it again?

Christopher Duffley

Host of Mission Possible Podcast
<http://www.missionpossiblepodcast.com/>

LINKS TO SUBSCRIBE:

iTunes
<https://itunes.apple.com/us/podcast/mission-possible-christopher/id1103092109?mt=2>
| Stitcher <http://www.stitcher.com/s?fid=88094&refid=stpr> | Google
Play
<https://goo.gl/app/playmusic?ibi=com.google.PlayMusic&isi=691797987&ius=googleplaymusic&link=https://play.google.com/music/m/Ik76dexklcprwnpuxbdr2s6bm3y?t=Mission_Possible_with_Christopher_Duffley>
| Follow Podcast On TuneIn And Listen To Latest Episode
<http://tunein.com/radio/Mission-Possible-With-Christopher-Duffley-p892505/>

LIKE/FOLLOW Me:

Facebook <http://facebook.com/christopherduffley> | Twitter
<http://twitter.com/chrisduffley> | YouTube
<http://youtube.com/christopherduffley> | Instagram
<http://instagram.com/christopherduffley>

On Jan 9, 2022, at 13:33, Charles Adkins <cadkins6739@...>
wrote:

Using the latest NVDA and latest remote add-on, for some reason when I
connect with another computer using the nvda remote server, I hear a
constant stream of numbers being spoken that keeps going until I
disconnect,
no matter what I do. Any suggestions would be very helpful. This
happens
with windows 7, 10, and 11. Thanks.












--
Subscribe to a WordPress for Newbies Mailing List by sending a message
to:
wp4newbs-request@... with 'subscribe' in the Subject field OR
by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com &
www.mysitesbeenhacked.com














--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@... with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com





Orbit writer and nvda

Guy Schlosser
 

Hey all, first of all happy new year! I have a question. I am working with a client on using NVDA, or Jaws, with the orbit Writer. I am having trouble with both products, and wondering if anyone has the answer. How do you enter commands, such as alt plus F4, or navigate through the start menu using the orbit writer? I can get into the start menu, but cannot navigate it. Is it possible to use this device as a keyboard without a QWERTY keyboard hooked to the system? Any help would be greatly appreciated.
Thanks,

Guy

JAWS Certified, 2021, https://www.freedomscientific.com/Training/Certification


Re: NVDA remote question help needed

Jackie
 

Charles, do you have any addons installed, save for remote, on the
machine that's problematic?

On 1/9/22, Gene <gsasner@...> wrote:
Since it happens on one machine and since this seems to be an uncommon or
very uncommon problem, I suspect there is a problem with the machine. I’m
not saying there is something wrong with it, but perhaps it is running
something that causes the behavior;. You may need help that goes beyond
the knowledge of the list. My question is whether there is any support
option to get help for obscure problems like this.

Gene
-----Original Message-----
From: Charles Adkins
Sent: Sunday, January 09, 2022 5:05 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote question help needed

Thanks, did not help, but I do have it narrowed down to one offending
machine. The numbers will not stop until I disconnect and it happens whether
I'm controling remote or local.




On Jan 9, 2022, at 5:58 PM, Gene <gsasner@...> wrote:



While I doubt this will solve the problem, try turning off report dynamic
content changes. It’s a toggle, NVDA 5, 5 on the main keyboard.

Gene
-----Original Message-----
From: Charles Adkins
Sent: Sunday, January 09, 2022 4:55 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA remote question help needed

?Anks s m*. Progress bars are not checked on either machine. I've figured
out that it only happens on one work machine I connect to, but once those
progress bars are being read, it continues to read them until I disconnect
remote. Progress bars are not enabled on any machines I'm using. Numbers
read so fast I have to keep hitting the control key to stop speech to see if
I'm controling local or remote machine. Not good when you're trying to keep
a radio station on the air lol!!!! Thanks again.

Chuck
> On Jan 9, 2022, at 4:55 PM, Jackie <abletec@...> wrote:
>
> Sounds like perhaps you've got background progress bars enabled?
> That's under object presentation > report background progress bars.
>
>> On 1/9/22, Christopher Duffley <christophernduffley@...> wrote:
>> I've never gotten this issue, so I have no idea. It's fine here on both
10
>> and 11.
>>
>> What exactly happens when the connection is established? Maybe delete
your
>> INI file in your NVDA folder and do it again?
>>
>> Christopher Duffley
>>
>> Host of Mission Possible Podcast
<http://www.missionpossiblepodcast.com/>
>>
>> LINKS TO SUBSCRIBE:
>>
>> iTunes
>>
<https://itunes.apple.com/us/podcast/mission-possible-christopher/id1103092109?mt=2>
>> | Stitcher <http://www.stitcher.com/s?fid=88094&refid=stpr> | Google
Play
>>
<https://goo.gl/app/playmusic?ibi=com.google.PlayMusic&isi=691797987&ius=googleplaymusic&link=https://play.google.com/music/m/Ik76dexklcprwnpuxbdr2s6bm3y?t=Mission_Possible_with_Christopher_Duffley>
>> | Follow Podcast On TuneIn And Listen To Latest Episode
>>
<http://tunein.com/radio/Mission-Possible-With-Christopher-Duffley-p892505/>
>>
>> LIKE/FOLLOW Me:
>>
>> Facebook <http://facebook.com/christopherduffley> | Twitter
>> <http://twitter.com/chrisduffley> | YouTube
>> <http://youtube.com/christopherduffley> | Instagram
>> <http://instagram.com/christopherduffley>
>>
>> On Jan 9, 2022, at 13:33, Charles Adkins <cadkins6739@...>
wrote:
>>
>> Using the latest NVDA and latest remote add-on, for some reason when I
>> connect with another computer using the nvda remote server, I hear a
>> constant stream of numbers being spoken that keeps going until I
disconnect,
>> no matter what I do. Any suggestions would be very helpful. This
happens
>> with windows 7, 10, and 11. Thanks.
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> Subscribe to a WordPress for Newbies Mailing List by sending a message
to:
> wp4newbs-request@... with 'subscribe' in the Subject field OR
by
> visiting the list page at http://www.freelists.org/list/wp4newbs
> & check out my sites at www.brightstarsweb.com &
www.mysitesbeenhacked.com
>
>
>
>
>










--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@... with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com


Re: Reading Output in Programming Environments Automatically

Gene
 

Check to see if report dynamic content changes is on.  It is by default but it may have been turned off by a typing error.  The command to toggle it on or off is NVDA 5, 5 on the main keyboard.
 
Gene

-----Original Message-----
Sent: Sunday, January 09, 2022 5:54 PM
To: nvda
Subject: [nvda] Reading Output in Programming Environments Automatically
 
Dear all,

I am using NVDA 2021.3.1 on Windows 10. When using the Command Prompt
or Windows Subsystem for Linux, NVDA does not auto-read the output on
pressing Enter. This means that I need to use the review cursor to
manually inspect the output each time. I do not recall experiencing
this behaviour in the past. I ran the COM registration fixing tool and
restarted with add-ons disabled without success. Is there a
work-around or patch to enable NVDA to auto-read output?

I would truly appreciate all suggestions and inputs on this.

Best Regards,
Bhavya Shah
Stanford University | Class of 2024
LinkedIn: https://www.linkedin.com/in/bhavyashah125/





Reading Output in Programming Environments Automatically

Bhavya shah
 

Dear all,

I am using NVDA 2021.3.1 on Windows 10. When using the Command Prompt
or Windows Subsystem for Linux, NVDA does not auto-read the output on
pressing Enter. This means that I need to use the review cursor to
manually inspect the output each time. I do not recall experiencing
this behaviour in the past. I ran the COM registration fixing tool and
restarted with add-ons disabled without success. Is there a
work-around or patch to enable NVDA to auto-read output?

I would truly appreciate all suggestions and inputs on this.

Best Regards,
Bhavya Shah
Stanford University | Class of 2024
LinkedIn: https://www.linkedin.com/in/bhavyashah125/


Re: NVDA remote question help needed

Gene
 

Since it happens on one machine and since this seems to be an uncommon or very uncommon problem, I suspect there is a problem with the machine.  I’m not saying there is something wrong with it, but perhaps it is running something that causes the behavior;.  You may need help  that goes beyond the knowledge of the list.  My question is whether there is any support option to get help for obscure problems like this.
 
Gene

-----Original Message-----
Sent: Sunday, January 09, 2022 5:05 PM
Subject: Re: [nvda] NVDA remote question help needed
 
Thanks, did not help, but I do have it narrowed down to one offending machine. The numbers will not stop until I disconnect and it happens whether I'm controling remote or local.


On Jan 9, 2022, at 5:58 PM, Gene <gsasner@...> wrote:


While I doubt this will solve the problem, try turning off report dynamic content changes.  It’s a toggle, NVDA 5, 5 on the main keyboard.
 
Gene
-----Original Message-----
Sent: Sunday, January 09, 2022 4:55 PM
Subject: Re: [nvda] NVDA remote question help needed
 
?Anks s m*. Progress bars are not checked on either machine. I've figured out that it only happens on one work machine I connect to, but once those progress bars are being read, it continues to read them until I disconnect remote. Progress bars are not enabled on any machines I'm using. Numbers read so fast I have to keep hitting the control key to stop speech to see if I'm controling local or remote machine. Not good when you're trying to keep a radio station on the air lol!!!! Thanks again.

Chuck
> On Jan 9, 2022, at 4:55 PM, Jackie <abletec@...> wrote:
>
> Sounds like perhaps you've got background progress bars enabled?
> That's under object presentation > report background progress bars.
>
>> On 1/9/22, Christopher Duffley <christophernduffley@...> wrote:
>> I've never gotten this issue, so I have no idea. It's fine here on both 10
>> and 11.
>>
>> What exactly happens when the connection is established? Maybe delete your
>> INI file in your NVDA folder and do it again?
>>
>> Christopher Duffley
>>
>> Host of Mission Possible Podcast <http://www.missionpossiblepodcast.com/>
>>
>> LINKS TO SUBSCRIBE:
>>
>> iTunes
>> <https://itunes.apple.com/us/podcast/mission-possible-christopher/id1103092109?mt=2>
>> | Stitcher <http://www.stitcher.com/s?fid=88094&refid=stpr> | Google Play
>> <https://goo.gl/app/playmusic?ibi=com.google.PlayMusic&isi=691797987&ius=googleplaymusic&link=https://play.google.com/music/m/Ik76dexklcprwnpuxbdr2s6bm3y?t=Mission_Possible_with_Christopher_Duffley>
>> | Follow Podcast On TuneIn And Listen To Latest Episode
>> <http://tunein.com/radio/Mission-Possible-With-Christopher-Duffley-p892505/>
>>
>> LIKE/FOLLOW Me:
>>
>> Facebook <http://facebook.com/christopherduffley> | Twitter
>> <http://twitter.com/chrisduffley> | YouTube
>> <http://youtube.com/christopherduffley> | Instagram
>> <http://instagram.com/christopherduffley>
>>
>> On Jan 9, 2022, at 13:33, Charles Adkins <cadkins6739@...> wrote:
>>
>> Using the latest NVDA and latest remote add-on, for some reason when I
>> connect with another computer using the nvda remote server, I hear a
>> constant stream of numbers being spoken that keeps going until I disconnect,
>> no matter what I do. Any suggestions would be very helpful. This happens
>> with windows 7, 10, and 11. Thanks.
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> Subscribe to a WordPress for Newbies Mailing List by sending a message to:
> wp4newbs-request@... with 'subscribe' in the Subject field OR by
> visiting the list page at http://www.freelists.org/list/wp4newbs
> & check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com
>
>
>
>
>





Re: NVDA remote question help needed

Charles Adkins <cadkins6739@...>
 

Thanks, did not help, but I do have it narrowed down to one offending machine. The numbers will not stop until I disconnect and it happens whether I'm controling remote or local. 


On Jan 9, 2022, at 5:58 PM, Gene <gsasner@...> wrote:


While I doubt this will solve the problem, try turning off report dynamic content changes.  It’s a toggle, NVDA 5, 5 on the main keyboard.
 
Gene
-----Original Message-----
Sent: Sunday, January 09, 2022 4:55 PM
Subject: Re: [nvda] NVDA remote question help needed
 
?Anks s m*. Progress bars are not checked on either machine. I've figured out that it only happens on one work machine I connect to, but once those progress bars are being read, it continues to read them until I disconnect remote. Progress bars are not enabled on any machines I'm using. Numbers read so fast I have to keep hitting the control key to stop speech to see if I'm controling local or remote machine. Not good when you're trying to keep a radio station on the air lol!!!! Thanks again.

Chuck
> On Jan 9, 2022, at 4:55 PM, Jackie <abletec@...> wrote:
>
> Sounds like perhaps you've got background progress bars enabled?
> That's under object presentation > report background progress bars.
>
>> On 1/9/22, Christopher Duffley <christophernduffley@...> wrote:
>> I've never gotten this issue, so I have no idea. It's fine here on both 10
>> and 11.
>>
>> What exactly happens when the connection is established? Maybe delete your
>> INI file in your NVDA folder and do it again?
>>
>> Christopher Duffley
>>
>> Host of Mission Possible Podcast <http://www.missionpossiblepodcast.com/>
>>
>> LINKS TO SUBSCRIBE:
>>
>> iTunes
>> <https://itunes.apple.com/us/podcast/mission-possible-christopher/id1103092109?mt=2>
>> | Stitcher <http://www.stitcher.com/s?fid=88094&refid=stpr> | Google Play
>> <https://goo.gl/app/playmusic?ibi=com.google.PlayMusic&isi=691797987&ius=googleplaymusic&link=https://play.google.com/music/m/Ik76dexklcprwnpuxbdr2s6bm3y?t=Mission_Possible_with_Christopher_Duffley>
>> | Follow Podcast On TuneIn And Listen To Latest Episode
>> <http://tunein.com/radio/Mission-Possible-With-Christopher-Duffley-p892505/>
>>
>> LIKE/FOLLOW Me:
>>
>> Facebook <http://facebook.com/christopherduffley> | Twitter
>> <http://twitter.com/chrisduffley> | YouTube
>> <http://youtube.com/christopherduffley> | Instagram
>> <http://instagram.com/christopherduffley>
>>
>> On Jan 9, 2022, at 13:33, Charles Adkins <cadkins6739@...> wrote:
>>
>> Using the latest NVDA and latest remote add-on, for some reason when I
>> connect with another computer using the nvda remote server, I hear a
>> constant stream of numbers being spoken that keeps going until I disconnect,
>> no matter what I do. Any suggestions would be very helpful. This happens
>> with windows 7, 10, and 11. Thanks.
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> Subscribe to a WordPress for Newbies Mailing List by sending a message to:
> wp4newbs-request@... with 'subscribe' in the Subject field OR by
> visiting the list page at http://www.freelists.org/list/wp4newbs
> & check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com
>
>
>
>
>





Re: NVDA remote question help needed

Charles Adkins <cadkins6739@...>
 

Thanks for answering. Well, deleted my remote.ini file, checked progress bars on all machines and they are not enabled. There are two machines I connecting with at work. One works fine, but when I connect to one machine at work, the progress bars keep being announced and the only way I can stop them on local or remote machine is to disconnect my remote connection. Very strange. 


On Jan 9, 2022, at 4:41 PM, Christopher Duffley <christophernduffley@...> wrote:

I've never gotten this issue, so I have no idea. It's fine here on both 10 and 11.

What exactly happens when the connection is established? Maybe delete your INI file in your NVDA folder and do it again?

Christopher Duffley


LINKS TO SUBSCRIBE:


LIKE/FOLLOW Me:


On Jan 9, 2022, at 13:33, Charles Adkins <cadkins6739@...> wrote:

Using the latest NVDA and latest remote add-on, for some reason when I connect with another computer using the nvda remote server, I hear a constant stream of numbers being spoken that keeps going until I disconnect, no matter what I do. Any suggestions would be very helpful. This happens with windows 7, 10, and 11. Thanks.







Re: NVDA remote question help needed

Gene
 

While I doubt this will solve the problem, try turning off report dynamic content changes.  It’s a toggle, NVDA 5, 5 on the main keyboard.
 
Gene

-----Original Message-----
Sent: Sunday, January 09, 2022 4:55 PM
Subject: Re: [nvda] NVDA remote question help needed
 
?Anks s m*. Progress bars are not checked on either machine. I've figured out that it only happens on one work machine I connect to, but once those progress bars are being read, it continues to read them until I disconnect remote. Progress bars are not enabled on any machines I'm using. Numbers read so fast I have to keep hitting the control key to stop speech to see if I'm controling local or remote machine. Not good when you're trying to keep a radio station on the air lol!!!! Thanks again.

Chuck
> On Jan 9, 2022, at 4:55 PM, Jackie <abletec@...> wrote:
>
> Sounds like perhaps you've got background progress bars enabled?
> That's under object presentation > report background progress bars.
>
>> On 1/9/22, Christopher Duffley <christophernduffley@...> wrote:
>> I've never gotten this issue, so I have no idea. It's fine here on both 10
>> and 11.
>>
>> What exactly happens when the connection is established? Maybe delete your
>> INI file in your NVDA folder and do it again?
>>
>> Christopher Duffley
>>
>> Host of Mission Possible Podcast <http://www.missionpossiblepodcast.com/>
>>
>> LINKS TO SUBSCRIBE:
>>
>> iTunes
>> <https://itunes.apple.com/us/podcast/mission-possible-christopher/id1103092109?mt=2>
>> | Stitcher <http://www.stitcher.com/s?fid=88094&refid=stpr> | Google Play
>> <https://goo.gl/app/playmusic?ibi=com.google.PlayMusic&isi=691797987&ius=googleplaymusic&link=https://play.google.com/music/m/Ik76dexklcprwnpuxbdr2s6bm3y?t=Mission_Possible_with_Christopher_Duffley>
>> | Follow Podcast On TuneIn And Listen To Latest Episode
>> <http://tunein.com/radio/Mission-Possible-With-Christopher-Duffley-p892505/>
>>
>> LIKE/FOLLOW Me:
>>
>> Facebook <http://facebook.com/christopherduffley> | Twitter
>> <http://twitter.com/chrisduffley> | YouTube
>> <http://youtube.com/christopherduffley> | Instagram
>> <http://instagram.com/christopherduffley>
>>
>> On Jan 9, 2022, at 13:33, Charles Adkins <cadkins6739@...> wrote:
>>
>> Using the latest NVDA and latest remote add-on, for some reason when I
>> connect with another computer using the nvda remote server, I hear a
>> constant stream of numbers being spoken that keeps going until I disconnect,
>> no matter what I do. Any suggestions would be very helpful. This happens
>> with windows 7, 10, and 11. Thanks.
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> Subscribe to a WordPress for Newbies Mailing List by sending a message to:
> wp4newbs-request@... with 'subscribe' in the Subject field OR by
> visiting the list page at http://www.freelists.org/list/wp4newbs
> & check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com
>
>
>
>
>





Re: NVDA remote question help needed

Charles Adkins <cadkins6739@...>
 

?Anks s m*. Progress bars are not checked on either machine. I've figured out that it only happens on one work machine I connect to, but once those progress bars are being read, it continues to read them until I disconnect remote. Progress bars are not enabled on any machines I'm using. Numbers read so fast I have to keep hitting the control key to stop speech to see if I'm controling local or remote machine. Not good when you're trying to keep a radio station on the air lol!!!! Thanks again.

Chuck

On Jan 9, 2022, at 4:55 PM, Jackie <abletec@...> wrote:

Sounds like perhaps you've got background progress bars enabled?
That's under object presentation > report background progress bars.

On 1/9/22, Christopher Duffley <christophernduffley@...> wrote:
I've never gotten this issue, so I have no idea. It's fine here on both 10
and 11.

What exactly happens when the connection is established? Maybe delete your
INI file in your NVDA folder and do it again?

Christopher Duffley

Host of Mission Possible Podcast <http://www.missionpossiblepodcast.com/>

LINKS TO SUBSCRIBE:

iTunes
<https://itunes.apple.com/us/podcast/mission-possible-christopher/id1103092109?mt=2>
| Stitcher <http://www.stitcher.com/s?fid=88094&refid=stpr> | Google Play
<https://goo.gl/app/playmusic?ibi=com.google.PlayMusic&isi=691797987&ius=googleplaymusic&link=https://play.google.com/music/m/Ik76dexklcprwnpuxbdr2s6bm3y?t=Mission_Possible_with_Christopher_Duffley>
| Follow Podcast On TuneIn And Listen To Latest Episode
<http://tunein.com/radio/Mission-Possible-With-Christopher-Duffley-p892505/>

LIKE/FOLLOW Me:

Facebook <http://facebook.com/christopherduffley> | Twitter
<http://twitter.com/chrisduffley> | YouTube
<http://youtube.com/christopherduffley> | Instagram
<http://instagram.com/christopherduffley>

On Jan 9, 2022, at 13:33, Charles Adkins <cadkins6739@...> wrote:

Using the latest NVDA and latest remote add-on, for some reason when I
connect with another computer using the nvda remote server, I hear a
constant stream of numbers being spoken that keeps going until I disconnect,
no matter what I do. Any suggestions would be very helpful. This happens
with windows 7, 10, and 11. Thanks.












--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@... with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com





Re: Tony's add-ons: updates and new features

Gene
 

This opens help information for add-ons in general.  I’m not sure that every add-on has help available in this way, but they generally do.
 
New steps begin on new lines.
Open tools in the NVDA menu.
down arrow to manage add-ons and press enter, and find the add-on in the list.
Then tab until you get to a help button and press the space bar.
I believe this usually opens the web page where you downloaded the add-on and the page usually has a description of how to use the add-on and available commands.
 
Gene

-----Original Message-----
Sent: Sunday, January 09, 2022 2:39 PM
Subject: Re: [nvda] Tony's add-ons: updates and new features
 
Hi, i didn’t find a help button when it came to any of the ad-ons that tony has written.  there was only something that gave something about things.  What do you suggest that i try as it relates to any help file concerning ad-ons.  Thank you for any information that you might have as it relates to ad-ons.

On Jan 4, 2022, at 3:29 PM, Tony Malykh <anton.malykh@...> wrote:
 

Yes, it is possible, I just tried that and it seems to work. It's a little ttricky to configure since this button tends to disappear quickly.
On quirk is that sometimes this button is called:
Skip Ads
and sometimes
Skip Ad
So you would need to either create two separate bookmarks, or use regular expression in the pattern to capture both like:
^Skip Ads?$

 

On 1/4/2022 12:09 PM, mystragical@... wrote:
Anyone managed to assign a bookmark to skip adds button on youtube? Is it possible with this addon?
 


Re: question about NVDA and the Windows login screen

 

First, this is going to become my standard practice in 2022, so it's not aimed at you, specifically.  Every NVDA user needs to know how to bring up the NVDA User Guide when questions like this arise:  NVDA + N, H, U   [NVDA Menu, Help, User Guide]

In the User Guide, search on just the phrase "windows start" and you're right in the middle of the discussion of enabling the setting in General settings to do just that.

Now I'll give the answer:
NVDA + CTRL + G opens the NVDA General Settings.  So does NVDA + N, P, S  (Since General settings are the initial Settings tab/pane displayed)

In the General settings there is a checkbox for, Use NVDA during sign-in (requires administrator privileges).  If you have admin privilege, and check this checkbox, NVDA should become active on the Windows sign-in screen the next time you have to sign-in to windows.
--

Brian - Windows 10, 64-Bit, Version 21H2, Build 19044  

The instinctive need to be the member of a closely-knit group fighting for common ideals may grow so strong that it becomes inessential what these ideals are.

       ~ Konrad Lorenz (1903-1989)

 


Re: NVDA remote question help needed

Jackie
 

Sounds like perhaps you've got background progress bars enabled?
That's under object presentation > report background progress bars.

On 1/9/22, Christopher Duffley <christophernduffley@...> wrote:
I've never gotten this issue, so I have no idea. It's fine here on both 10
and 11.

What exactly happens when the connection is established? Maybe delete your
INI file in your NVDA folder and do it again?

Christopher Duffley

Host of Mission Possible Podcast <http://www.missionpossiblepodcast.com/>

LINKS TO SUBSCRIBE:

iTunes
<https://itunes.apple.com/us/podcast/mission-possible-christopher/id1103092109?mt=2>
| Stitcher <http://www.stitcher.com/s?fid=88094&refid=stpr> | Google Play
<https://goo.gl/app/playmusic?ibi=com.google.PlayMusic&isi=691797987&ius=googleplaymusic&link=https://play.google.com/music/m/Ik76dexklcprwnpuxbdr2s6bm3y?t=Mission_Possible_with_Christopher_Duffley>
| Follow Podcast On TuneIn And Listen To Latest Episode
<http://tunein.com/radio/Mission-Possible-With-Christopher-Duffley-p892505/>

LIKE/FOLLOW Me:

Facebook <http://facebook.com/christopherduffley> | Twitter
<http://twitter.com/chrisduffley> | YouTube
<http://youtube.com/christopherduffley> | Instagram
<http://instagram.com/christopherduffley>

On Jan 9, 2022, at 13:33, Charles Adkins <cadkins6739@...> wrote:

Using the latest NVDA and latest remote add-on, for some reason when I
connect with another computer using the nvda remote server, I hear a
constant stream of numbers being spoken that keeps going until I disconnect,
no matter what I do. Any suggestions would be very helpful. This happens
with windows 7, 10, and 11. Thanks.











--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@... with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com


Re: question about NVDA and the Windows login screen

kristy stichter
 

thanks steve, I thought it was something like that, but just wanted to
make sure.

On 1/10/22, Steve Wettlaufer <sendstuffhere@...> wrote:
Yes.  If you go to preferences and then press enter on the settings
option, you should see a checkbox that says use NVDA during sign in
under the general category.  Remember that you need to have
administrator access on the machine in question for this to work.

Steve

On 2022-01-09 4:45 p.m., kristy stichter wrote:
Hi all
is there a way on a windows 10 computer to have NVDA starting
automatically when the login screen appears?
I thought there was but can't remember for sure

also happy new year to everyone on this list.

Kristy









Re: question about NVDA and the Windows login screen

Steve Wettlaufer
 

Yes.  If you go to preferences and then press enter on the settings option, you should see a checkbox that says use NVDA during sign in under the general category.  Remember that you need to have administrator access on the machine in question for this to work.

Steve

On 2022-01-09 4:45 p.m., kristy stichter wrote:
Hi all
is there a way on a windows 10 computer to have NVDA starting
automatically when the login screen appears?
I thought there was but can't remember for sure

also happy new year to everyone on this list.

Kristy




question about NVDA and the Windows login screen

kristy stichter
 

Hi all
is there a way on a windows 10 computer to have NVDA starting
automatically when the login screen appears?
I thought there was but can't remember for sure

also happy new year to everyone on this list.

Kristy


Re: NVDA remote question help needed

Christopher Duffley
 

I've never gotten this issue, so I have no idea. It's fine here on both 10 and 11.

What exactly happens when the connection is established? Maybe delete your INI file in your NVDA folder and do it again?

Christopher Duffley


LINKS TO SUBSCRIBE:


LIKE/FOLLOW Me:


On Jan 9, 2022, at 13:33, Charles Adkins <cadkins6739@...> wrote:

Using the latest NVDA and latest remote add-on, for some reason when I connect with another computer using the nvda remote server, I hear a constant stream of numbers being spoken that keeps going until I disconnect, no matter what I do. Any suggestions would be very helpful. This happens with windows 7, 10, and 11. Thanks.







Re: Tony's add-ons: updates and new features

 

Moderator Intervention Alert!!

First, I want to thank Tony Malykh from the bottom of my heart for all he's been doing with add-ons, and all the other participants on this topic for taking the time to give feedback and exchange ideas with Tony and vice-versa.

Second, I want to ask you to stop, but only in relation to this topic.

It is much more helpful, particularly from an archival perspective, but even for those who are interested in certain of Tony's add-ons, but not others, if these information exchanges are broken out into dedicated topics related to the single add-on to which the discussion refers.

I am not trying to dissuade the membership from continuing the various discussions, but I am asking that you please break them into single add-on "digestible chunks" rather than this particular topic going on with the focus meandering from one add-on to the next.

Thank you for your consideration and attention to this matter.
--

Brian - Windows 10, 64-Bit, Version 21H2, Build 19044  

The instinctive need to be the member of a closely-knit group fighting for common ideals may grow so strong that it becomes inessential what these ideals are.

       ~ Konrad Lorenz (1903-1989)

 


Re: Tony's add-ons: updates and new features

David Ingram
 

Hi, i didn’t find a help button when it came to any of the ad-ons that tony has written.  there was only something that gave something about things.  What do you suggest that i try as it relates to any help file concerning ad-ons.  Thank you for any information that you might have as it relates to ad-ons.

On Jan 4, 2022, at 3:29 PM, Tony Malykh <anton.malykh@...> wrote:

Yes, it is possible, I just tried that and it seems to work. It's a little ttricky to configure since this button tends to disappear quickly.
On quirk is that sometimes this button is called:
Skip Ads
and sometimes
Skip Ad
So you would need to either create two separate bookmarks, or use regular expression in the pattern to capture both like:
^Skip Ads?$


On 1/4/2022 12:09 PM, mystragical@... wrote:
Anyone managed to assign a bookmark to skip adds button on youtube? Is it possible with this addon?

9781 - 9800 of 101184