Date   

Arm64 NVDA is running with x86 emulation>

valiant8086
 

There were some commits about getting NVDA to run on Arm a few years ago. It does run for sure, but Microsoft had a note somewhere about what you can and cannot run on Windows on Arm and they mentioned that NVDA has an Arm version. I just happened to notice today that while my NVDA runs fine, it's not arm, it's x86. Do we have an Arm64 version of NVDA hiding away somewhere that I need to try for the most efficiency?


--
Cheers:
Aaron Spears, AKA Valiant8086 General Partner at Valiant Galaxy Associates "we make (VERY GOOD AUDIOGAMES) for the blind comunity" http://valiantGalaxy.com


Re: Is the Mendeley Reference Manager accessible with NVDA?

farhan israk
 

Thank you. I am using the software. I will  check the addon.


On Wed, 16 Feb 2022, 6:19 am Brian Vogel, <britechguy@...> wrote:
Farhan,

What Mendeley citation tool are you using and in what program?  It appears that they have an add-in specific to creating citations right in Microsoft Word without needing to use other parts of Mendeley Reference Manager that's called Mendeley Cite and available on the Microsoft Store.  This is Mendeley's own page regarding the Mendeley Cite.
--

Brian - Windows 10, 64-Bit, Version 21H2, Build 19044  

Constantly insisting on “my rights” with no consideration of “my responsibilities” isn’t “freedom” — it’s adolescence.
     ~ Commenter, Evangelos, in comments for
         America 2022: Where Everyone Has Rights and No One Has Responsibilities,
        New York Times, February 8, 2022

 


Re: Using AnyDesk with NVDA

farhan israk
 

Use any desk with nbda object navigation.


On Wed, 16 Feb 2022, 9:22 am Charlie Dyasi, <charliesa.dyasi@...> wrote:
Hello Janet, I used any desk, because I had a little bit of sight, they had to compensate, where I could not use in VDA.
Mostly, if it’s a link that you’re going to sign into, while using any desk in order to pick up calls while you are at home, or maybe at work, you will mainly use shift tab.
As far as my knowledge goes that way you are limited to shift and tab. Tab move forward in the page, and shift Tab move backwards. 

Mr charlie Dyasi
Zibonele Community Radio
c:+27726978309


On 16 Feb 2022, at 02:43, Brian Vogel <britechguy@...> wrote:

Janet,

Message  #81902 on the archive is from 
Thomas E Williamson, Senior
, who says he uses AnyDesk.  You may want to reach out to him privately.  If he and you are willing to have a "How to use AnyDesk with NVDA," discussion on the Chat Subgroup, that would be great, as the discussion is almost certainly going to skew very heavily toward the commands of AnyDesk itself rather than NVDA proper.
--

Brian - Windows 10, 64-Bit, Version 21H2, Build 19044  

Constantly insisting on “my rights” with no consideration of “my responsibilities” isn’t “freedom” — it’s adolescence.
     ~ Commenter, Evangelos, in comments for
         America 2022: Where Everyone Has Rights and No One Has Responsibilities,
        New York Times, February 8, 2022

 


Re: Navigating the screen question

Quentin Christensen
 

As well as Brian's request for more information, if you haven't already, I would suggested browsing the "Switching from Jaws to NVDA" guide at: https://github.com/nvaccess/nvda-community/wiki/SwitchingFromJawsToNVDA as it has lots of handy tips for those familiar with that screen reader.

Kind regards

Quentin.

On Wed, Feb 16, 2022 at 3:47 AM Brian Vogel <britechguy@...> wrote:
Christian,

Can you please explain exactly what method you're using under JAWS that works?   NVDA has three different review modes and they're analogous to those of JAWS, so if you say how you're doing it in JAWS you'll likely just have to switch to the analogous review mode in NVDA.  But we need to know what that is first.
--

Brian - Windows 10, 64-Bit, Version 21H2, Build 19044  

Constantly insisting on “my rights” with no consideration of “my responsibilities” isn’t “freedom” — it’s adolescence.
     ~ Commenter, Evangelos, in comments for
         America 2022: Where Everyone Has Rights and No One Has Responsibilities,
        New York Times, February 8, 2022

 



--
Quentin Christensen
Training and Support Manager


Re: Using AnyDesk with NVDA

Charlie Dyasi
 

Hello Janet, I used any desk, because I had a little bit of sight, they had to compensate, where I could not use in VDA.
Mostly, if it’s a link that you’re going to sign into, while using any desk in order to pick up calls while you are at home, or maybe at work, you will mainly use shift tab.
As far as my knowledge goes that way you are limited to shift and tab. Tab move forward in the page, and shift Tab move backwards. 

Mr charlie Dyasi
Zibonele Community Radio
c:+27726978309
Charliesa.dyasi@...


On 16 Feb 2022, at 02:43, Brian Vogel <britechguy@...> wrote:

Janet,

Message   on the archive is from 
Thomas E Williamson, Senior
, who says he uses AnyDesk.  You may want to reach out to him privately.  If he and you are willing to have a "How to use AnyDesk with NVDA," discussion on the Chat Subgroup, that would be great, as the discussion is almost certainly going to skew very heavily toward the commands of AnyDesk itself rather than NVDA proper.
--

Brian - Windows 10, 64-Bit, Version 21H2, Build 19044  

Constantly insisting on “my rights” with no consideration of “my responsibilities” isn’t “freedom” — it’s adolescence.
     ~ Commenter, Evangelos, in comments for
         America 2022: Where Everyone Has Rights and No One Has Responsibilities,
        New York Times, February 8, 2022

 


Re: Using AnyDesk with NVDA

 

Janet,

Message   on the archive is from 
Thomas E Williamson, Senior
, who says he uses AnyDesk.  You may want to reach out to him privately.  If he and you are willing to have a "How to use AnyDesk with NVDA," discussion on the Chat Subgroup, that would be great, as the discussion is almost certainly going to skew very heavily toward the commands of AnyDesk itself rather than NVDA proper.
--

Brian - Windows 10, 64-Bit, Version 21H2, Build 19044  

Constantly insisting on “my rights” with no consideration of “my responsibilities” isn’t “freedom” — it’s adolescence.
     ~ Commenter, Evangelos, in comments for
         America 2022: Where Everyone Has Rights and No One Has Responsibilities,
        New York Times, February 8, 2022

 


Announcement: what's coming in future Windows App Essentials add-on releases

 

Hi all,

The following is meant as an informational notice and is subject to change based on many things, one of them being Windows 10/11 development:

As I was preparing Windows App Essentials 22.02.1 out of band update, I thought it would be best to let the community know what’s going on with this add-on. While people using development snapshots would have had a chance to test upcoming features and changes, stable users must wait a while before they can get a chance to use new features and changes. Also, 2022 may turn out to be quite an interesting year as there are some major changes planned for the add-on, and I figured it would be best to inform you now before I won’t have time to do so.

The upcoming changes to Windows App Essentials add-on can be divided into three areas: Windows 10 and 11 development, NVDA changes, and refining support for Windows 10/11 aps. Some of these changes are already present in recent development snapshots, some will be implemented in coming weeks, and some will take up to a year to fully implement.

First, in regards to NVDA changes, I hereby announce that support for NVDA 2021.2 is coming to a close soon. The upcoming version of Windows App Essentials (tentatively scheduled for end of February/early March and designated 22.03) will be the last stable version to support the immediate past release of NVDA. This means that the version coming after that (tentatively scheduled for April 2022) will ask you to upgrade to NVDA 2021.3 or later. In fact, this will happen sooner for users of a particular add-on: about a week after Windows App Essentials 22.03 is released, Add-on Updater will refuse to update Windows App Essentials if you are using NVDA 2021.2. To avoid this situation, I advise upgrading to NVDA 2021.3 today if you haven’t done so. This change is in keeping with NVDA support policy from the add-on: Windows App Essentials supports, at a maximum, current, immediate past, and latest NVDA development builds (as of time of this writing, this corresponds to 2021.3.1 (current), 2021.2 (immediate past), and alpha builds).

Speaking of NVDA changes, as of time of this writing, the add-on is being prepared to support NVDA 2022.1 changes, with this work to be completed around the time NVDA 2022.1 beta 1 is released for testing. I can assure you that when 2022.1 beta 1 is released, a stable version of Windows App Essentials will be released which will declare support for the upcoming NVDA version. More on that later.

Second, in regards to refining support for Windows 10/11 aps, that is the focus of the add-on 22.03 release. In particular, the next version of the add-on will vastly improve support for Windows 10/11 Calculator and will respond to latest changes in Maps app. Other apps may see refinements depending on what happens with them and Windows in general, more so if apps do change in Windows 11 Insider Preview builds.

Speaking of Windows Insider Preview, this is part of the third change area: Windows 10/11 development. A few days ago Microsoft announced changes to how features will be tested by Windows Insiders on dev channel (for specifics, see the Windows Insider Program blog post published not long ago). The highlight of this change is that not all Insiders will see a feature come to life (termed “A/B testing”). Therefore, Windows App Essentials add-on may or may not support all features being tested by Insiders, but I will do my best to support a feature that is being rolled out to all dev channel Insiders (this is one of the reasons for the existence of this add-on).

Speaking of Windows development, you might be wondering about Windows 10 support. Since Microsoft is putting more effort into Windows 11, it is natural that not all big features will make their way to Windows 10. What I can say is that Windows App Essentials will never forget Windows 10 users – the add-on will support you until Microsoft ends Windows 10 support in 2025.

Speaking of Windows 10, a big change is being planned this year from the add-on. Specifically, the installation error message you get when attempting to install the add-on on unsupported Windows 10 releases will change. Currently when you try to do that, NVDA will simply say that you must install the earliest supported Windows 10 release (currently, Windows 10 21H1) or later. As early as northern fall of 2022 (around September), if you try to install the add-on on anything earlier than Windows 10 21H2, NVDA will show you the list of supported Windows 10 releases (21H2, 22H2, Server 2022). This change stems from a possibility that Windows 10 Version 22H2 could be a minor feature update (we won’t speculate further as it is too early to tell). This change also acknowledges that Windows 10 is, for all practical purposes, in maintenance mode. The change from the add-on will take about a year to fully implement – the vast majority of this change will be done by fall 2022, with the final pieces put in place around this time next year. To clarify, this change will be for Windows 10 users – it won’t affect Windows 11… actually, it will affect Windows 11 users but that won’t happen until next year (hint: search for “Windows 11 support duration” using your favorite search engine).

You may have noticed that when I talked about earliest supported release for the upcoming change, I didn’t say Windows 10 21H1. All I can say is that if you are running Windows 10 releases earlier than 21H2 (November 2021 Update/build 19044), please DO upgrade at your earliest convenience. Put it differently, Windows App Essentials will drop support for 21H1 (May 2021 Update/build 19043) in a few months, and I will give you at least 30 days’ notice before doing so.

 

Although I could have talked about Windows App Essentials add-on development plan a few weeks later, I wrote the above plan today to not only serve as a reminder for me, but to let you know that I haven’t forgotten about users of my add-on in the midst of school (as I’ve been preaching on various channels, it is far better to inform the community about what’s up so folks can prepare and add-on authors should invite users along the ride). But I do foresee a day when I will not have time to discuss add-on development plans months in advance, let alone devote more time to testing Insider Preview builds and come up with workarounds for users. Until that day comes, I will do my best to make sure NVDA users on Windows 10 and 11 are treated with respect through development of Windows App Essentials, and one way I can do so is discussing development plans with you all.

 

P.S. I think I said this before, but it won’t hurt to repeat: there will come a day where Windows 10 and 11 users won’t have to hunt for Windows App Essentials on community add-ons repository, nor read add-on release announcements from me. All things eventually come to a close, and Windows App Essentials add-on is no exception; I just don’t know when that will happen, which makes it both certain and uncertain.

 

Hope this helps.

Cheers,

Joseph


Re: Is the Mendeley Reference Manager accessible with NVDA?

 

Farhan,

What Mendeley citation tool are you using and in what program?  It appears that they have an add-in specific to creating citations right in Microsoft Word without needing to use other parts of Mendeley Reference Manager that's called Mendeley Cite and available on the Microsoft Store.  This is Mendeley's own page regarding the Mendeley Cite.
--

Brian - Windows 10, 64-Bit, Version 21H2, Build 19044  

Constantly insisting on “my rights” with no consideration of “my responsibilities” isn’t “freedom” — it’s adolescence.
     ~ Commenter, Evangelos, in comments for
         America 2022: Where Everyone Has Rights and No One Has Responsibilities,
        New York Times, February 8, 2022

 


Re: Using NVDA with Microsoft project 2016

Arlene
 

Oh okay. I hope Jaws works.

 

Sent from Mail for Windows

 

From: Kenny Cheung
Sent: February 15, 2022 3:58 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Using NVDA with Microsoft project 2016

 

I haven't tried project on the mac, but I don't really want to pay for a subscription. all the Microsoft stuff is through my state agency.

On 2/15/2022 18:55, Arlene wrote:

I don’t blame you. It just may go that way. You may end up using jaws.  Have you tried using Microsoft Project with your Mac Pro yet? I see your sitnature saying sent from my mac pro. Smiles. 

 

Sent from Mail for Windows

 

From: Kenny Cheung
Sent: February 15, 2022 3:51 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Using NVDA with Microsoft project 2016

 

Thanks. I’m starting not to like Microsoft Project.

Sent from Kenny’s MacBook Pro

 

On Feb 15, 2022, at 18:31, Arlene <nedster66@...> wrote:

 

Oh no, try jaws tomorrow and see what happens. I had a situation where Jaws would not work for a course I took in 2019. But NVDA worked even before I switched to win ten while doing this course.  I thought it was because Jaws was too old and I had an updated version of NVDA. I had windows 7, jaws 14 and NVDA 19 or whatever it was back then.  Then that system bit the dust. I got windows ten witch I have now. I did update to Jaws 19 along with NVDA 19 as well. Still Jaws didn’t work for it. NVDA worked. I did complete the course using NVDA. You may end up using Jaws. Who knows so it goes. Good luck with Microsoft project 16. 

 

Sent from Mail for Windows

 

From: Kenny Cheung
Sent: February 15, 2022 3:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Using NVDA with Microsoft project 2016

 

I'm going to try Jaws tomorrow and see how it goes. I'm looking for an add-on that will make using project 2016 easier because when I opened a knew project and tried putting in a start date I went to the projects ribbon and I went to the calendar section. their was a drop down box, and when I put in 2 /18/16 and shift tab to okay the date I put in didn't show up in the start date.

On 2/15/2022 17:59, Arlene wrote:

Hi, what type of addon are you looking for? You might want to look on the addons site in the meantime until someone answers your question.  Have you tried your project 16 using Nairator? Do you have Jaws for a back up screen reader if there is no addon when using project 16. 

 

Sent from Mail for Windows

 

From: Kenny Cheung
Sent: February 15, 2022 10:13 AM
To: nvda@nvda.groups.io
Subject: [nvda] Using NVDA with Microsoft project 2016

 

Hi,

I’m taking a project management class and we’re using project 2016, and I was wondering if their are add-ons or some commands guide I could look at. I was doing a practice project and it wanted me to add an event as a exception for a no work day, and I had trouble doing that and trying to navigate the calendar to add a start date.

 

Sent from Kenny’s iPhone

 

 

 

 

 

 

 

 


Using AnyDesk with NVDA

Janet Brandly
 

Hello all,

 

I’m looking for ways to use AnyDesk with NVDA.  I did check the archives and someone said he is able to use it and is able to deal with some workarounds but didn’t provide any details.  Any tips or tricks would be much appreciated.

 

Thanks,

 

Janet


Re: Using NVDA with Microsoft project 2016

Kenny Cheung
 

I haven't tried project on the mac, but I don't really want to pay for a subscription. all the Microsoft stuff is through my state agency.

On 2/15/2022 18:55, Arlene wrote:

I don’t blame you. It just may go that way. You may end up using jaws.  Have you tried using Microsoft Project with your Mac Pro yet? I see your sitnature saying sent from my mac pro. Smiles. 

 

Sent from Mail for Windows

 

From: Kenny Cheung
Sent: February 15, 2022 3:51 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Using NVDA with Microsoft project 2016

 

Thanks. I’m starting not to like Microsoft Project.

Sent from Kenny’s MacBook Pro



On Feb 15, 2022, at 18:31, Arlene <nedster66@...> wrote:

 

Oh no, try jaws tomorrow and see what happens. I had a situation where Jaws would not work for a course I took in 2019. But NVDA worked even before I switched to win ten while doing this course.  I thought it was because Jaws was too old and I had an updated version of NVDA. I had windows 7, jaws 14 and NVDA 19 or whatever it was back then.  Then that system bit the dust. I got windows ten witch I have now. I did update to Jaws 19 along with NVDA 19 as well. Still Jaws didn’t work for it. NVDA worked. I did complete the course using NVDA. You may end up using Jaws. Who knows so it goes. Good luck with Microsoft project 16. 

 

Sent from Mail for Windows

 

From: Kenny Cheung
Sent: February 15, 2022 3:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Using NVDA with Microsoft project 2016

 

I'm going to try Jaws tomorrow and see how it goes. I'm looking for an add-on that will make using project 2016 easier because when I opened a knew project and tried putting in a start date I went to the projects ribbon and I went to the calendar section. their was a drop down box, and when I put in 2 /18/16 and shift tab to okay the date I put in didn't show up in the start date.

On 2/15/2022 17:59, Arlene wrote:

Hi, what type of addon are you looking for? You might want to look on the addons site in the meantime until someone answers your question.  Have you tried your project 16 using Nairator? Do you have Jaws for a back up screen reader if there is no addon when using project 16. 

 

Sent from Mail for Windows

 

From: Kenny Cheung
Sent: February 15, 2022 10:13 AM
To: nvda@nvda.groups.io
Subject: [nvda] Using NVDA with Microsoft project 2016

 

Hi,

I’m taking a project management class and we’re using project 2016, and I was wondering if their are add-ons or some commands guide I could look at. I was doing a practice project and it wanted me to add an event as a exception for a no work day, and I had trouble doing that and trying to navigate the calendar to add a start date.

 

Sent from Kenny’s iPhone

 

 

 

 

 

 

 


Re: Using NVDA with Microsoft project 2016

Arlene
 

I don’t blame you. It just may go that way. You may end up using jaws.  Have you tried using Microsoft Project with your Mac Pro yet? I see your sitnature saying sent from my mac pro. Smiles. 

 

Sent from Mail for Windows

 

From: Kenny Cheung
Sent: February 15, 2022 3:51 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Using NVDA with Microsoft project 2016

 

Thanks. I’m starting not to like Microsoft Project.

Sent from Kenny’s MacBook Pro



On Feb 15, 2022, at 18:31, Arlene <nedster66@...> wrote:

 

Oh no, try jaws tomorrow and see what happens. I had a situation where Jaws would not work for a course I took in 2019. But NVDA worked even before I switched to win ten while doing this course.  I thought it was because Jaws was too old and I had an updated version of NVDA. I had windows 7, jaws 14 and NVDA 19 or whatever it was back then.  Then that system bit the dust. I got windows ten witch I have now. I did update to Jaws 19 along with NVDA 19 as well. Still Jaws didn’t work for it. NVDA worked. I did complete the course using NVDA. You may end up using Jaws. Who knows so it goes. Good luck with Microsoft project 16. 

 

Sent from Mail for Windows

 

From: Kenny Cheung
Sent: February 15, 2022 3:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Using NVDA with Microsoft project 2016

 

I'm going to try Jaws tomorrow and see how it goes. I'm looking for an add-on that will make using project 2016 easier because when I opened a knew project and tried putting in a start date I went to the projects ribbon and I went to the calendar section. their was a drop down box, and when I put in 2 /18/16 and shift tab to okay the date I put in didn't show up in the start date.

On 2/15/2022 17:59, Arlene wrote:

Hi, what type of addon are you looking for? You might want to look on the addons site in the meantime until someone answers your question.  Have you tried your project 16 using Nairator? Do you have Jaws for a back up screen reader if there is no addon when using project 16. 

 

Sent from Mail for Windows

 

From: Kenny Cheung
Sent: February 15, 2022 10:13 AM
To: nvda@nvda.groups.io
Subject: [nvda] Using NVDA with Microsoft project 2016

 

Hi,

I’m taking a project management class and we’re using project 2016, and I was wondering if their are add-ons or some commands guide I could look at. I was doing a practice project and it wanted me to add an event as a exception for a no work day, and I had trouble doing that and trying to navigate the calendar to add a start date.

 

Sent from Kenny’s iPhone

 

 

 

 

 

 

 


Re: Using NVDA with Microsoft project 2016

Kenny Cheung
 

Thanks. I’m starting not to like Microsoft Project.
Sent from Kenny’s MacBook Pro

On Feb 15, 2022, at 18:31, Arlene <nedster66@...> wrote:

Oh no, try jaws tomorrow and see what happens. I had a situation where Jaws would not work for a course I took in 2019. But NVDA worked even before I switched to win ten while doing this course.  I thought it was because Jaws was too old and I had an updated version of NVDA. I had windows 7, jaws 14 and NVDA 19 or whatever it was back then.  Then that system bit the dust. I got windows ten witch I have now. I did update to Jaws 19 along with NVDA 19 as well. Still Jaws didn’t work for it. NVDA worked. I did complete the course using NVDA. You may end up using Jaws. Who knows so it goes. Good luck with Microsoft project 16. 
 
Sent from Mail for Windows
 
From: Kenny Cheung
Sent: February 15, 2022 3:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Using NVDA with Microsoft project 2016
 

I'm going to try Jaws tomorrow and see how it goes. I'm looking for an add-on that will make using project 2016 easier because when I opened a knew project and tried putting in a start date I went to the projects ribbon and I went to the calendar section. their was a drop down box, and when I put in 2 /18/16 and shift tab to okay the date I put in didn't show up in the start date.

On 2/15/2022 17:59, Arlene wrote:
Hi, what type of addon are you looking for? You might want to look on the addons site in the meantime until someone answers your question.  Have you tried your project 16 using Nairator? Do you have Jaws for a back up screen reader if there is no addon when using project 16. 
 
Sent from Mail for Windows
 
From: Kenny Cheung
Sent: February 15, 2022 10:13 AM
To: nvda@nvda.groups.io
Subject: [nvda] Using NVDA with Microsoft project 2016
 
Hi,
I’m taking a project management class and we’re using project 2016, and I was wondering if their are add-ons or some commands guide I could look at. I was doing a practice project and it wanted me to add an event as a exception for a no work day, and I had trouble doing that and trying to navigate the calendar to add a start date.
 
Sent from Kenny’s iPhone
 
 
 
 

 


Re: Using NVDA with Microsoft project 2016

Arlene
 

Oh no, try jaws tomorrow and see what happens. I had a situation where Jaws would not work for a course I took in 2019. But NVDA worked even before I switched to win ten while doing this course.  I thought it was because Jaws was too old and I had an updated version of NVDA. I had windows 7, jaws 14 and NVDA 19 or whatever it was back then.  Then that system bit the dust. I got windows ten witch I have now. I did update to Jaws 19 along with NVDA 19 as well. Still Jaws didn’t work for it. NVDA worked. I did complete the course using NVDA. You may end up using Jaws. Who knows so it goes. Good luck with Microsoft project 16.

 

Sent from Mail for Windows

 

From: Kenny Cheung
Sent: February 15, 2022 3:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Using NVDA with Microsoft project 2016

 

I'm going to try Jaws tomorrow and see how it goes. I'm looking for an add-on that will make using project 2016 easier because when I opened a knew project and tried putting in a start date I went to the projects ribbon and I went to the calendar section. their was a drop down box, and when I put in 2 /18/16 and shift tab to okay the date I put in didn't show up in the start date.

On 2/15/2022 17:59, Arlene wrote:

Hi, what type of addon are you looking for? You might want to look on the addons site in the meantime until someone answers your question.  Have you tried your project 16 using Nairator? Do you have Jaws for a back up screen reader if there is no addon when using project 16.

 

Sent from Mail for Windows

 

From: Kenny Cheung
Sent: February 15, 2022 10:13 AM
To: nvda@nvda.groups.io
Subject: [nvda] Using NVDA with Microsoft project 2016

 

Hi,

I’m taking a project management class and we’re using project 2016, and I was wondering if their are add-ons or some commands guide I could look at. I was doing a practice project and it wanted me to add an event as a exception for a no work day, and I had trouble doing that and trying to navigate the calendar to add a start date.

 

Sent from Kenny’s iPhone

 

 

 

 

 


Re: Is the Mendeley Reference Manager accessible with NVDA?

 

Topic retitled to be directly indicative of the actual question.  The fact that a citation is for an IEEE journal article really isn't central.  It's whether anyone has found Mendeley Reference Manager to be accessible with NVDA.

Based upon this page at the Mendeley website, Accessibility: Enabling people with disabilities to access Mendeley content quickly and easily, it would appear the company does have a dedication to accessibility, but I do not know of anyone who uses Mendeley Reference Manager and thought someone among our readership might, and be able to confirm/refute its functional accessibility.
--

Brian - Windows 10, 64-Bit, Version 21H2, Build 19044  

Constantly insisting on “my rights” with no consideration of “my responsibilities” isn’t “freedom” — it’s adolescence.
     ~ Commenter, Evangelos, in comments for
         America 2022: Where Everyone Has Rights and No One Has Responsibilities,
        New York Times, February 8, 2022

 


Re: Using NVDA with Microsoft project 2016

Kenny Cheung
 

I'm going to try Jaws tomorrow and see how it goes. I'm looking for an add-on that will make using project 2016 easier because when I opened a knew project and tried putting in a start date I went to the projects ribbon and I went to the calendar section. their was a drop down box, and when I put in 2 /18/16 and shift tab to okay the date I put in didn't show up in the start date.

On 2/15/2022 17:59, Arlene wrote:

Hi, what type of addon are you looking for? You might want to look on the addons site in the meantime until someone answers your question.  Have you tried your project 16 using Nairator? Do you have Jaws for a back up screen reader if there is no addon when using project 16.

 

Sent from Mail for Windows

 

From: Kenny Cheung
Sent: February 15, 2022 10:13 AM
To: nvda@nvda.groups.io
Subject: [nvda] Using NVDA with Microsoft project 2016

 

Hi,

I’m taking a project management class and we’re using project 2016, and I was wondering if their are add-ons or some commands guide I could look at. I was doing a practice project and it wanted me to add an event as a exception for a no work day, and I had trouble doing that and trying to navigate the calendar to add a start date.

 

Sent from Kenny’s iPhone

 

 

 

 


Re: Using NVDA with Microsoft project 2016

Arlene
 

Hi, what type of addon are you looking for? You might want to look on the addons site in the meantime until someone answers your question.  Have you tried your project 16 using Nairator? Do you have Jaws for a back up screen reader if there is no addon when using project 16.

 

Sent from Mail for Windows

 

From: Kenny Cheung
Sent: February 15, 2022 10:13 AM
To: nvda@nvda.groups.io
Subject: [nvda] Using NVDA with Microsoft project 2016

 

Hi,

I’m taking a project management class and we’re using project 2016, and I was wondering if their are add-ons or some commands guide I could look at. I was doing a practice project and it wanted me to add an event as a exception for a no work day, and I had trouble doing that and trying to navigate the calendar to add a start date.

 

Sent from Kenny’s iPhone

 

 

 

 


Re: changed NVDA's behaviour in taskbar after installing latest windows 10 updates (built 19044.1526)

Louise Pfau
 

On Mon, Feb 14, 2022 at 02:29 PM, Brian Vogel wrote:
Louise,

If I may ask, what did you used to get?  I honestly don't recall what is/was announced when you throw focus to the taskbar which does, of course, have running applications as its "center section" upon which you alight first (though there can be pinned applications there, too).
I don't recall precisely what was announced either, but I know it's different than it was before.

Louise


Windows App Essentials 22.02.1, an out of band (emergency) update for Windows 11 users #addonrelease

 

Hi all,

Windows Ap Essentials 22.02.1 (out of band update) is now available:

https://github.com/josephsl/wintenApps/releases/download/22.02/wintenApps-22.02.1.nvda-addon

 

This update addresses status bar announcement issue for Windows 11 Notepad users (for people using Notepad version 11.2112, released to everyone today). Although the necessary changes will be part of the next stable release (March 2022 at the earliest), the change for Notepad users is the only difference between 22.02 and 22.02.1. As this is an out of band (emergency) update, this release will not be made available to Add-on Updater users. Therefore, after installing Windows App Essentials 22.02.1, ignore Add-on Updater notice about Windows App Essentials add-on update.

I will detail plans with Windows App Essentials in the next post.

Cheers,

Joseph

 


Is the Mendeley Reference Manager accessible with NVDA?

farhan israk
 

I am using Windows 10 21h2 and nvda 2021.3.1. How can I use mendely reference system to cite ieee reference? I am not even understanding the interface. I am not allowed to use any other software or cite  manually.

6841 - 6860 of 99637