Date   

Re: YNT: [nvda] nvda remote unofficial servers

David Goldfield
 

Interesting. Who is running these servers?

David Goldfield,
Assistive Technology Specialist

Feel free to visit my Web site
WWW.DavidGoldfield.Info

On 10/8/2016 2:03 PM, Engin Albayrak wrote:
NVRA.ME

Iowa



IL.NVRA.ME

Illinois



TX.NVRA.ME

Texas



WA.NVRA.ME

Washington



CA.NVRA.ME

California



NY.NVRA.ME

New York



VA.NVRA.ME

Virginia



VA2.NVRA.ME

Virginia, Alternative



UK.NVRA.ME

London (Andre Louis)



UK2.NVRA.ME

London, alternative (Andre Louis)



IE.NVRA.ME

İrlanda



NL.NVRA.ME

Hollanda



HK.NVRA.ME

Hong Kong



SG.NVRA.ME

Singapur



BR.NVRA.ME

Brezilya



-----Özgün İleti-----
Kimden: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] Yerine kavein thran
Tarih: 8 Ekim 2016 Cumartesi 11:40
Kime: nvda@nvda.groups.io
Konu: Re: [nvda] nvda remote unofficial servers

this one is not working

On 4/1/16, Patrick ZAJDA <patrick@zajda.fr> wrote:
Hi,

You said:
all info is under the getting in touch heading on the nvra.me
So the e-mail address is so protected against bots that I cannot
understand it ;) I'l try anyway.

Thanks.

Shaun Everiss:
all info is under the getting in touch heading on the nvra.me I found
this on the freakyfwoof twitter but its on the tidbits
topdotenterprises.com magazine also.



On 31/03/2016 11:05 p.m., Patrick ZAJDA wrote:
Hi Shaun and all,

First of all, thank you very much for this information! I didn't
know that, on which twitter did you read it?
And how this server (for the code) is affiliated to NVDARemote creators?
Last question: I set up a server, but I don't find the e-mail
address to contact, what e-mail address is it?

Thanks!

Patrick

Shaun Everiss:
Hi.
well I just read this on twitter but there are some unofficial
remote servers.
nvdaremote.com is the main server.
nvra.me is the server list there are 16 servers and could be room
for more they want to put servers world wide eventually.


--
Patrick ZAJDA









Re: nvda remote unofficial servers

David Mehler
 

Hello,

Possibly a stupid question, how does one set up your own NVDA remote server?

Thanks.
Dave.

On 10/8/16, Engin Albayrak <mealbayrak@gmail.com> wrote:

NVRA.ME

Iowa



IL.NVRA.ME

Illinois



TX.NVRA.ME

Texas



WA.NVRA.ME

Washington



CA.NVRA.ME

California



NY.NVRA.ME

New York



VA.NVRA.ME

Virginia



VA2.NVRA.ME

Virginia, Alternative



UK.NVRA.ME

London (Andre Louis)



UK2.NVRA.ME

London, alternative (Andre Louis)



IE.NVRA.ME

İrlanda



NL.NVRA.ME

Hollanda



HK.NVRA.ME

Hong Kong



SG.NVRA.ME

Singapur



BR.NVRA.ME

Brezilya



-----Özgün İleti-----
Kimden: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] Yerine kavein
thran
Tarih: 8 Ekim 2016 Cumartesi 11:40
Kime: nvda@nvda.groups.io
Konu: Re: [nvda] nvda remote unofficial servers

this one is not working

On 4/1/16, Patrick ZAJDA <patrick@zajda.fr> wrote:
Hi,

You said:
all info is under the getting in touch heading on the nvra.me
So the e-mail address is so protected against bots that I cannot
understand it ;) I'l try anyway.

Thanks.

Shaun Everiss:
all info is under the getting in touch heading on the nvra.me I found
this on the freakyfwoof twitter but its on the tidbits
topdotenterprises.com magazine also.



On 31/03/2016 11:05 p.m., Patrick ZAJDA wrote:
Hi Shaun and all,

First of all, thank you very much for this information! I didn't
know that, on which twitter did you read it?
And how this server (for the code) is affiliated to NVDARemote
creators?
Last question: I set up a server, but I don't find the e-mail
address to contact, what e-mail address is it?

Thanks!

Patrick

Shaun Everiss:
Hi.
well I just read this on twitter but there are some unofficial
remote servers.
nvdaremote.com is the main server.
nvra.me is the server list there are 16 servers and could be room
for more they want to put servers world wide eventually.



--
Patrick ZAJDA











YNT: [nvda] nvda remote unofficial servers

Engin Albayrak <mealbayrak@...>
 

NVRA.ME

Iowa



IL.NVRA.ME

Illinois



TX.NVRA.ME

Texas



WA.NVRA.ME

Washington



CA.NVRA.ME

California



NY.NVRA.ME

New York



VA.NVRA.ME

Virginia



VA2.NVRA.ME

Virginia, Alternative



UK.NVRA.ME

London (Andre Louis)



UK2.NVRA.ME

London, alternative (Andre Louis)



IE.NVRA.ME

İrlanda



NL.NVRA.ME

Hollanda



HK.NVRA.ME

Hong Kong



SG.NVRA.ME

Singapur



BR.NVRA.ME

Brezilya



-----Özgün İleti-----
Kimden: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] Yerine kavein thran
Tarih: 8 Ekim 2016 Cumartesi 11:40
Kime: nvda@nvda.groups.io
Konu: Re: [nvda] nvda remote unofficial servers

this one is not working

On 4/1/16, Patrick ZAJDA <patrick@zajda.fr> wrote:
Hi,

You said:
all info is under the getting in touch heading on the nvra.me
So the e-mail address is so protected against bots that I cannot
understand it ;) I'l try anyway.

Thanks.

Shaun Everiss:
all info is under the getting in touch heading on the nvra.me I found
this on the freakyfwoof twitter but its on the tidbits
topdotenterprises.com magazine also.



On 31/03/2016 11:05 p.m., Patrick ZAJDA wrote:
Hi Shaun and all,

First of all, thank you very much for this information! I didn't
know that, on which twitter did you read it?
And how this server (for the code) is affiliated to NVDARemote creators?
Last question: I set up a server, but I don't find the e-mail
address to contact, what e-mail address is it?

Thanks!

Patrick

Shaun Everiss:
Hi.
well I just read this on twitter but there are some unofficial
remote servers.
nvdaremote.com is the main server.
nvra.me is the server list there are 16 servers and could be room
for more they want to put servers world wide eventually.



--
Patrick ZAJDA




Re: creating a profile

Gene
 

Main steps start on new lines.
Control n to open the NVDA menu. 
Down arrow to preferences and press enter.  it's a submenu. 
Down arrow to browse mode.  Press enter. Tab through the dialog. 
The setting is a check box.  If it isn't checked, press the space bar and then enter. 
 
If you change the setting and it works and you want to save the change, use the command control NVDA key c.

Gene
----- Original Message -----
Sent: Saturday, October 08, 2016 12:12 PM
Subject: Re: [nvda] creating a profile

Hi Gene,
 
Where would I find the browse mode settings?  Thanks for all your help.
 
From: Gene
Sent: Saturday, October 8, 2016 12:55 PM
Subject: Re: [nvda] creating a profile
 
I doubt this will help but In browse mode settings in NVDA, see if the setting that tells NVDA to read page automatically when page loads is checked.  It is by default but if it isn't checked, checking it may solve the problem.
 
Gene
 
From: Gary Metzler
Sent: Saturday, October 08, 2016 11:46 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
I am reading in html.
 
From: Gene
Sent: Saturday, October 8, 2016 12:15 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
I'm not sure.  I don't think you specified what e-mail program you are using.  Also, are you reading mail as plain text or as HTML. 
 
Gene
----- Original Message -----
From: Gary Metzler
Sent: Saturday, October 08, 2016 11:10 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
HI Gene,
 
When I opened this message it only read the first sentence.  Can this be changed?  Thanks,
 
From: Gene
Sent: Saturday, October 8, 2016 8:14 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
When I open an e-mail message, even though my messages are read automatically, I manually issue the read to end command before or at the moment reading starts.  I find this more efficient in starting reading faster and avoiding material I don't want read.  I have already heard the subject line.  If I tell the message to be read manually, this material is not spoken again and the message body starts to be read.  You may have to experiment to see how long to wait before issuing the command after opening a message. 
 
There are times when getting in the habit of manually issuing a command is superior to having something done automatically unless you know how to script a screen-reader to do exactly what you want it to do.  Issuing such a command will become automatic over time. 
 
Gene
 
From: Rui Fontes
Sent: Saturday, October 08, 2016 6:53 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
Sorry, but Windows Live Mail already does that...
And, a profil is only to set different configurations to an app or action...

What you want to achieve, if it is not already done, will need an
appmodule...

Rui


-----Mensagem Original-----
De: Gary Metzler
Data: 8 de outubro de 2016 11:10
Para: nvda@nvda.groups.io
Assunto: [nvda] creating a profile


Hi All,

Since I am new to nvda I would like to know if it is possible to create a
profile for windows live mail to read the entire message upon opening it?
If so, how is this done?  Thanks for any help.Regards, Gary kn4ox
 





Re: browse mode, Re: [nvda] creating a profile

Gary Metzler <gmtravel@...>
 

Hi John,

Thanks, this is very helpful.

-----Original Message-----
From: John Sanfilippo
Sent: Saturday, October 8, 2016 1:28 PM
To: nvda@nvda.groups.io
Subject: browse mode, Re: [nvda] creating a profile

NVDA n, p, b, should do it.

JS



On 10/8/16 13:21, Gary Metzler wrote:
Hi Gene,

I found the browse settings and the check box wasn’t checked. I checked
it and now the messages are read to the end. Thanks again.

*From:* Gene
*Sent:* Saturday, October 8, 2016 12:55 PM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

I doubt this will help but In browse mode settings in NVDA, see if the
setting that tells NVDA to read page automatically when page loads is
checked. It is by default but if it isn't checked, checking it may
solve the problem.

Gene

*From:* Gary Metzler
*Sent:* Saturday, October 08, 2016 11:46 AM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

I am reading in html.

*From:* Gene
*Sent:* Saturday, October 8, 2016 12:15 PM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

I'm not sure. I don't think you specified what e-mail program you are
using. Also, are you reading mail as plain text or as HTML.

Gene
----- Original Message -----
*From:* Gary Metzler
*Sent:* Saturday, October 08, 2016 11:10 AM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

HI Gene,

When I opened this message it only read the first sentence. Can this be
changed? Thanks,

*From:* Gene
*Sent:* Saturday, October 8, 2016 8:14 AM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

When I open an e-mail message, even though my messages are read
automatically, I manually issue the read to end command before or at the
moment reading starts. I find this more efficient in starting reading
faster and avoiding material I don't want read. I have already heard
the subject line. If I tell the message to be read manually, this
material is not spoken again and the message body starts to be read.
You may have to experiment to see how long to wait before issuing the
command after opening a message.

There are times when getting in the habit of manually issuing a command
is superior to having something done automatically unless you know how
to script a screen-reader to do exactly what you want it to do. Issuing
such a command will become automatic over time.

Gene

*From:* Rui Fontes
*Sent:* Saturday, October 08, 2016 6:53 AM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

Sorry, but Windows Live Mail already does that...
And, a profil is only to set different configurations to an app or action...

What you want to achieve, if it is not already done, will need an
appmodule...

Rui


-----Mensagem Original-----
De: Gary Metzler
Data: 8 de outubro de 2016 11:10
Para: nvda@nvda.groups.io
Assunto: [nvda] creating a profile


Hi All,

Since I am new to nvda I would like to know if it is possible to create a
profile for windows live mail to read the entire message upon opening it?
If so, how is this done? Thanks for any help.Regards, Gary kn4ox






Re: creating a profile

Gary Metzler <gmtravel@...>
 

Hi John,

Thanks for the info.

-----Original Message-----
From: John Sanfilippo
Sent: Saturday, October 8, 2016 1:25 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile

Hi,

I was going to suggest the same thing: turn on SayAll in BrowseMode, and
then:

Using Thunderbird as the mail client, I found that on opening most
messages, NVDA would get super chatty, reading and rereading headings,
but, I'd just tap the up arrow and the message body would be read. Very
nice.
But this may not work in WLM., and it doesn't work with certain messages.

John S



On 10/8/16 12:55, Gene wrote:
I doubt this will help but In browse mode settings in NVDA, see if the
setting that tells NVDA to read page automatically when page loads is
checked. It is by default but if it isn't checked, checking it may
solve the problem.

Gene

*From:* Gary Metzler <mailto:gmtravel@bellsouth.net>
*Sent:* Saturday, October 08, 2016 11:46 AM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* Re: [nvda] creating a profile

I am reading in html.

*From:* Gene
*Sent:* Saturday, October 8, 2016 12:15 PM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* Re: [nvda] creating a profile

I'm not sure. I don't think you specified what e-mail program you are
using. Also, are you reading mail as plain text or as HTML.

Gene
----- Original Message -----
*From:* Gary Metzler
*Sent:* Saturday, October 08, 2016 11:10 AM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

HI Gene,

When I opened this message it only read the first sentence. Can this be
changed? Thanks,

*From:* Gene
*Sent:* Saturday, October 8, 2016 8:14 AM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

When I open an e-mail message, even though my messages are read
automatically, I manually issue the read to end command before or at the
moment reading starts. I find this more efficient in starting reading
faster and avoiding material I don't want read. I have already heard
the subject line. If I tell the message to be read manually, this
material is not spoken again and the message body starts to be read.
You may have to experiment to see how long to wait before issuing the
command after opening a message.

There are times when getting in the habit of manually issuing a command
is superior to having something done automatically unless you know how
to script a screen-reader to do exactly what you want it to do. Issuing
such a command will become automatic over time.

Gene

*From:* Rui Fontes
*Sent:* Saturday, October 08, 2016 6:53 AM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

Sorry, but Windows Live Mail already does that...
And, a profil is only to set different configurations to an app or action...

What you want to achieve, if it is not already done, will need an
appmodule...

Rui


-----Mensagem Original-----
De: Gary Metzler
Data: 8 de outubro de 2016 11:10
Para: nvda@nvda.groups.io
Assunto: [nvda] creating a profile


Hi All,

Since I am new to nvda I would like to know if it is possible to create a
profile for windows live mail to read the entire message upon opening it?
If so, how is this done? Thanks for any help.Regards, Gary kn4ox






browse mode, Re: [nvda] creating a profile

John Sanfilippo
 

NVDA n, p, b, should do it.

JS

On 10/8/16 13:21, Gary Metzler wrote:
Hi Gene,

I found the browse settings and the check box wasn’t checked. I checked
it and now the messages are read to the end. Thanks again.

*From:* Gene
*Sent:* Saturday, October 8, 2016 12:55 PM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

I doubt this will help but In browse mode settings in NVDA, see if the
setting that tells NVDA to read page automatically when page loads is
checked. It is by default but if it isn't checked, checking it may
solve the problem.

Gene

*From:* Gary Metzler
*Sent:* Saturday, October 08, 2016 11:46 AM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

I am reading in html.

*From:* Gene
*Sent:* Saturday, October 8, 2016 12:15 PM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

I'm not sure. I don't think you specified what e-mail program you are
using. Also, are you reading mail as plain text or as HTML.

Gene
----- Original Message -----
*From:* Gary Metzler
*Sent:* Saturday, October 08, 2016 11:10 AM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

HI Gene,

When I opened this message it only read the first sentence. Can this be
changed? Thanks,

*From:* Gene
*Sent:* Saturday, October 8, 2016 8:14 AM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

When I open an e-mail message, even though my messages are read
automatically, I manually issue the read to end command before or at the
moment reading starts. I find this more efficient in starting reading
faster and avoiding material I don't want read. I have already heard
the subject line. If I tell the message to be read manually, this
material is not spoken again and the message body starts to be read.
You may have to experiment to see how long to wait before issuing the
command after opening a message.

There are times when getting in the habit of manually issuing a command
is superior to having something done automatically unless you know how
to script a screen-reader to do exactly what you want it to do. Issuing
such a command will become automatic over time.

Gene

*From:* Rui Fontes
*Sent:* Saturday, October 08, 2016 6:53 AM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

Sorry, but Windows Live Mail already does that...
And, a profil is only to set different configurations to an app or action...

What you want to achieve, if it is not already done, will need an
appmodule...

Rui


-----Mensagem Original-----
De: Gary Metzler
Data: 8 de outubro de 2016 11:10
Para: nvda@nvda.groups.io
Assunto: [nvda] creating a profile


Hi All,

Since I am new to nvda I would like to know if it is possible to create a
profile for windows live mail to read the entire message upon opening it?
If so, how is this done? Thanks for any help.Regards, Gary kn4ox






Re: creating a profile

John Sanfilippo
 

Hi,

I was going to suggest the same thing: turn on SayAll in BrowseMode, and
then:

Using Thunderbird as the mail client, I found that on opening most
messages, NVDA would get super chatty, reading and rereading headings,
but, I'd just tap the up arrow and the message body would be read. Very
nice.
But this may not work in WLM., and it doesn't work with certain messages.

John S

On 10/8/16 12:55, Gene wrote:
I doubt this will help but In browse mode settings in NVDA, see if the
setting that tells NVDA to read page automatically when page loads is
checked. It is by default but if it isn't checked, checking it may
solve the problem.

Gene

*From:* Gary Metzler <mailto:gmtravel@bellsouth.net>
*Sent:* Saturday, October 08, 2016 11:46 AM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* Re: [nvda] creating a profile

I am reading in html.

*From:* Gene
*Sent:* Saturday, October 8, 2016 12:15 PM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* Re: [nvda] creating a profile

I'm not sure. I don't think you specified what e-mail program you are
using. Also, are you reading mail as plain text or as HTML.

Gene
----- Original Message -----
*From:* Gary Metzler
*Sent:* Saturday, October 08, 2016 11:10 AM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

HI Gene,

When I opened this message it only read the first sentence. Can this be
changed? Thanks,

*From:* Gene
*Sent:* Saturday, October 8, 2016 8:14 AM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

When I open an e-mail message, even though my messages are read
automatically, I manually issue the read to end command before or at the
moment reading starts. I find this more efficient in starting reading
faster and avoiding material I don't want read. I have already heard
the subject line. If I tell the message to be read manually, this
material is not spoken again and the message body starts to be read.
You may have to experiment to see how long to wait before issuing the
command after opening a message.

There are times when getting in the habit of manually issuing a command
is superior to having something done automatically unless you know how
to script a screen-reader to do exactly what you want it to do. Issuing
such a command will become automatic over time.

Gene

*From:* Rui Fontes
*Sent:* Saturday, October 08, 2016 6:53 AM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] creating a profile

Sorry, but Windows Live Mail already does that...
And, a profil is only to set different configurations to an app or action...

What you want to achieve, if it is not already done, will need an
appmodule...

Rui


-----Mensagem Original-----
De: Gary Metzler
Data: 8 de outubro de 2016 11:10
Para: nvda@nvda.groups.io
Assunto: [nvda] creating a profile


Hi All,

Since I am new to nvda I would like to know if it is possible to create a
profile for windows live mail to read the entire message upon opening it?
If so, how is this done? Thanks for any help.Regards, Gary kn4ox






Re: creating a profile

Gary Metzler <gmtravel@...>
 

Hi Gene,
 
I found the browse settings and the check box wasn’t checked.  I checked it and now the messages are read to the end.  Thanks again.
 

From: Gene
Sent: Saturday, October 8, 2016 12:55 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
I doubt this will help but In browse mode settings in NVDA, see if the setting that tells NVDA to read page automatically when page loads is checked.  It is by default but if it isn't checked, checking it may solve the problem.
 
Gene
 
From: Gary Metzler
Sent: Saturday, October 08, 2016 11:46 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
I am reading in html.
 
From: Gene
Sent: Saturday, October 8, 2016 12:15 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
I'm not sure.  I don't think you specified what e-mail program you are using.  Also, are you reading mail as plain text or as HTML. 
 
Gene
----- Original Message -----
From: Gary Metzler
Sent: Saturday, October 08, 2016 11:10 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
HI Gene,
 
When I opened this message it only read the first sentence.  Can this be changed?  Thanks,
 
From: Gene
Sent: Saturday, October 8, 2016 8:14 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
When I open an e-mail message, even though my messages are read automatically, I manually issue the read to end command before or at the moment reading starts.  I find this more efficient in starting reading faster and avoiding material I don't want read.  I have already heard the subject line.  If I tell the message to be read manually, this material is not spoken again and the message body starts to be read.  You may have to experiment to see how long to wait before issuing the command after opening a message. 
 
There are times when getting in the habit of manually issuing a command is superior to having something done automatically unless you know how to script a screen-reader to do exactly what you want it to do.  Issuing such a command will become automatic over time. 
 
Gene
 
From: Rui Fontes
Sent: Saturday, October 08, 2016 6:53 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
Sorry, but Windows Live Mail already does that...
And, a profil is only to set different configurations to an app or action...

What you want to achieve, if it is not already done, will need an
appmodule...

Rui


-----Mensagem Original-----
De: Gary Metzler
Data: 8 de outubro de 2016 11:10
Para: nvda@nvda.groups.io
Assunto: [nvda] creating a profile


Hi All,

Since I am new to nvda I would like to know if it is possible to create a
profile for windows live mail to read the entire message upon opening it?
If so, how is this done?  Thanks for any help.Regards, Gary kn4ox
 





Re: creating a profile

Gary Metzler <gmtravel@...>
 

Hi Gene,
 
Where would I find the browse mode settings?  Thanks for all your help.
 

From: Gene
Sent: Saturday, October 8, 2016 12:55 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
I doubt this will help but In browse mode settings in NVDA, see if the setting that tells NVDA to read page automatically when page loads is checked.  It is by default but if it isn't checked, checking it may solve the problem.
 
Gene
 
From: Gary Metzler
Sent: Saturday, October 08, 2016 11:46 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
I am reading in html.
 
From: Gene
Sent: Saturday, October 8, 2016 12:15 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
I'm not sure.  I don't think you specified what e-mail program you are using.  Also, are you reading mail as plain text or as HTML. 
 
Gene
----- Original Message -----
From: Gary Metzler
Sent: Saturday, October 08, 2016 11:10 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
HI Gene,
 
When I opened this message it only read the first sentence.  Can this be changed?  Thanks,
 
From: Gene
Sent: Saturday, October 8, 2016 8:14 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
When I open an e-mail message, even though my messages are read automatically, I manually issue the read to end command before or at the moment reading starts.  I find this more efficient in starting reading faster and avoiding material I don't want read.  I have already heard the subject line.  If I tell the message to be read manually, this material is not spoken again and the message body starts to be read.  You may have to experiment to see how long to wait before issuing the command after opening a message. 
 
There are times when getting in the habit of manually issuing a command is superior to having something done automatically unless you know how to script a screen-reader to do exactly what you want it to do.  Issuing such a command will become automatic over time. 
 
Gene
 
From: Rui Fontes
Sent: Saturday, October 08, 2016 6:53 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
Sorry, but Windows Live Mail already does that...
And, a profil is only to set different configurations to an app or action...

What you want to achieve, if it is not already done, will need an
appmodule...

Rui


-----Mensagem Original-----
De: Gary Metzler
Data: 8 de outubro de 2016 11:10
Para: nvda@nvda.groups.io
Assunto: [nvda] creating a profile


Hi All,

Since I am new to nvda I would like to know if it is possible to create a
profile for windows live mail to read the entire message upon opening it?
If so, how is this done?  Thanks for any help.Regards, Gary kn4ox
 





Re: adding a contact in wlm

Gary Metzler <gmtravel@...>
 

Hi Gene,
 
Thank you for the help.
 

From: Gene
Sent: Saturday, October 8, 2016 12:57 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] adding a contact in wlm
 
When the message is selected in the list but not opened, open the context menu and look through it.  you will probably find something such as add sender to contacts.
 
Gene
----- Original Message -----
From: Gary Metzler
Sent: Saturday, October 08, 2016 11:51 AM
To: nvda@nvda.groups.io
Subject: [nvda] adding a contact in wlm
 
Hi All,
 
How do you add a contact from an e mail message using wlm?  Thanks for any help.Regards, Gary kn4ox


Re: adding a contact in wlm

Gary Metzler <gmtravel@...>
 

Hi Rosemary,
 
I just tried your suggestion and it worked like a charm.  I added you to my address book.  Thanks again for your help.
 

From: Rosemarie Chavarria
Sent: Saturday, October 8, 2016 12:55 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] adding a contact in wlm
 

Hi, Gary,

 

If I remember correctly, you tab to where it says "add to address book" in windows live mail and either hit enter or the space bar. This is done while the message is open.

 

Hope this helps.

 

Rosemarie

 

 


On 10/8/2016 9:51 AM, Gary Metzler wrote:
Hi All,
 
How do you add a contact from an e mail message using wlm?  Thanks for any help.Regards, Gary kn4ox


Re: accessibility of "Free Commander"

Carlos
 

Hello:

The main program is accessible. The program configuration dialog box sections are somewhat accessible. The built-in text editor is not accessible at all.

This is using NVDA. I have not tried it with other screen readers.

Hope this helps you out?

On 10/8/2016 9:03 AM, Dan Beaver wrote:
Hi,


Does anyone know if free commander is accessible with NVDA or not? It sounds interesting and I'd like to try it but if it isn't accessible then I'm not going to waste my time.


thanks.


Dan Beaver


--
Carlos Gonzalez - Los Angeles, CA. - gmjc341961@gmail.com


Re: adding a contact in wlm

Gene
 

When the message is selected in the list but not opened, open the context menu and look through it.  you will probably find something such as add sender to contacts.
 
Gene

----- Original Message -----
Sent: Saturday, October 08, 2016 11:51 AM
Subject: [nvda] adding a contact in wlm

Hi All,
 
How do you add a contact from an e mail message using wlm?  Thanks for any help.Regards, Gary kn4ox


Re: adding a contact in wlm

Rosemarie Chavarria
 

Hi, Gary,


If I remember correctly, you tab to where it says "add to address book" in windows live mail and either hit enter or the space bar. This is done while the message is open.


Hope this helps.


Rosemarie




On 10/8/2016 9:51 AM, Gary Metzler wrote:
Hi All,
 
How do you add a contact from an e mail message using wlm?  Thanks for any help.Regards, Gary kn4ox


Re: creating a profile

Gene
 

I doubt this will help but In browse mode settings in NVDA, see if the setting that tells NVDA to read page automatically when page loads is checked.  It is by default but if it isn't checked, checking it may solve the problem.
 
Gene

Sent: Saturday, October 08, 2016 11:46 AM
Subject: Re: [nvda] creating a profile

I am reading in html.
 
From: Gene
Sent: Saturday, October 8, 2016 12:15 PM
Subject: Re: [nvda] creating a profile
 
I'm not sure.  I don't think you specified what e-mail program you are using.  Also, are you reading mail as plain text or as HTML. 
 
Gene
----- Original Message -----
From: Gary Metzler
Sent: Saturday, October 08, 2016 11:10 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
HI Gene,
 
When I opened this message it only read the first sentence.  Can this be changed?  Thanks,
 
From: Gene
Sent: Saturday, October 8, 2016 8:14 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
When I open an e-mail message, even though my messages are read automatically, I manually issue the read to end command before or at the moment reading starts.  I find this more efficient in starting reading faster and avoiding material I don't want read.  I have already heard the subject line.  If I tell the message to be read manually, this material is not spoken again and the message body starts to be read.  You may have to experiment to see how long to wait before issuing the command after opening a message. 
 
There are times when getting in the habit of manually issuing a command is superior to having something done automatically unless you know how to script a screen-reader to do exactly what you want it to do.  Issuing such a command will become automatic over time. 
 
Gene
 
From: Rui Fontes
Sent: Saturday, October 08, 2016 6:53 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
Sorry, but Windows Live Mail already does that...
And, a profil is only to set different configurations to an app or action...

What you want to achieve, if it is not already done, will need an
appmodule...

Rui


-----Mensagem Original-----
De: Gary Metzler
Data: 8 de outubro de 2016 11:10
Para: nvda@nvda.groups.io
Assunto: [nvda] creating a profile


Hi All,

Since I am new to nvda I would like to know if it is possible to create a
profile for windows live mail to read the entire message upon opening it?
If so, how is this done?  Thanks for any help.Regards, Gary kn4ox
 





Re: accessibility of "Free Commander"

Bryan Mckinnish
 

Hi.
Free commander is accessible.
I have it on my machine.
From what I've used of it, it seems accessible.

On 10/8/2016 12:03 PM, Dan Beaver wrote:
Hi,


Does anyone know if free commander is accessible with NVDA or not? It sounds interesting and I'd like to try it but if it isn't accessible then I'm not going to waste my time.


thanks.


Dan Beaver



.


adding a contact in wlm

Gary Metzler <gmtravel@...>
 

Hi All,
 
How do you add a contact from an e mail message using wlm?  Thanks for any help.Regards, Gary kn4ox


Re: creating a profile

Gary Metzler <gmtravel@...>
 

I am reading in html.
 

From: Gene
Sent: Saturday, October 8, 2016 12:15 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
I'm not sure.  I don't think you specified what e-mail program you are using.  Also, are you reading mail as plain text or as HTML. 
 
Gene
----- Original Message -----
From: Gary Metzler
Sent: Saturday, October 08, 2016 11:10 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
HI Gene,
 
When I opened this message it only read the first sentence.  Can this be changed?  Thanks,
 
From: Gene
Sent: Saturday, October 8, 2016 8:14 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
When I open an e-mail message, even though my messages are read automatically, I manually issue the read to end command before or at the moment reading starts.  I find this more efficient in starting reading faster and avoiding material I don't want read.  I have already heard the subject line.  If I tell the message to be read manually, this material is not spoken again and the message body starts to be read.  You may have to experiment to see how long to wait before issuing the command after opening a message. 
 
There are times when getting in the habit of manually issuing a command is superior to having something done automatically unless you know how to script a screen-reader to do exactly what you want it to do.  Issuing such a command will become automatic over time. 
 
Gene
 
From: Rui Fontes
Sent: Saturday, October 08, 2016 6:53 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
Sorry, but Windows Live Mail already does that...
And, a profil is only to set different configurations to an app or action...

What you want to achieve, if it is not already done, will need an
appmodule...

Rui


-----Mensagem Original-----
De: Gary Metzler
Data: 8 de outubro de 2016 11:10
Para: nvda@nvda.groups.io
Assunto: [nvda] creating a profile


Hi All,

Since I am new to nvda I would like to know if it is possible to create a
profile for windows live mail to read the entire message upon opening it?
If so, how is this done?  Thanks for any help.Regards, Gary kn4ox
 





Re: creating a profile

Gary Metzler <gmtravel@...>
 

I am using windows live mail.  I’ll have to check the message format.  Thanks,
 

From: Gene
Sent: Saturday, October 8, 2016 12:15 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
I'm not sure.  I don't think you specified what e-mail program you are using.  Also, are you reading mail as plain text or as HTML. 
 
Gene
----- Original Message -----
From: Gary Metzler
Sent: Saturday, October 08, 2016 11:10 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
HI Gene,
 
When I opened this message it only read the first sentence.  Can this be changed?  Thanks,
 
From: Gene
Sent: Saturday, October 8, 2016 8:14 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
When I open an e-mail message, even though my messages are read automatically, I manually issue the read to end command before or at the moment reading starts.  I find this more efficient in starting reading faster and avoiding material I don't want read.  I have already heard the subject line.  If I tell the message to be read manually, this material is not spoken again and the message body starts to be read.  You may have to experiment to see how long to wait before issuing the command after opening a message. 
 
There are times when getting in the habit of manually issuing a command is superior to having something done automatically unless you know how to script a screen-reader to do exactly what you want it to do.  Issuing such a command will become automatic over time. 
 
Gene
 
From: Rui Fontes
Sent: Saturday, October 08, 2016 6:53 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] creating a profile
 
Sorry, but Windows Live Mail already does that...
And, a profil is only to set different configurations to an app or action...

What you want to achieve, if it is not already done, will need an
appmodule...

Rui


-----Mensagem Original-----
De: Gary Metzler
Data: 8 de outubro de 2016 11:10
Para: nvda@nvda.groups.io
Assunto: [nvda] creating a profile


Hi All,

Since I am new to nvda I would like to know if it is possible to create a
profile for windows live mail to read the entire message upon opening it?
If so, how is this done?  Thanks for any help.Regards, Gary kn4ox