Date   

Re: keyboard question

Kwork
 

Melissa, if you are not currently able to use the insert key as an NVDA
modifier key, do the following:

1. Press windows key plus b to get to the notification area.
2. Arrow around till you hear the word "NVDA."
3. Press the space bar or the enter key to activate the NVDA menu.
4. Arrow down to preferences, then press the right arrow key to open the
preferences menu.
5. Arrow down to Keyboard settings, and press enter to enter the dialog
where you can tab around to explore the various options.
6. Tab till you hear the words "Use CapsLock as an NVDA modifier key."
7. Press the spacebar to check it. If it was already check, the spacebar
will uncheck it. Press it again to make sure it's checked.
8. Tab to the ok button and press the spacebar to approve the changes and
exit the keyboard settings.
Of course there are other settings you can set while you're in there, so
look around before exiting.
I personally have both the insert key and the capps lock set as modifiers.
Like you, I have heard that many newer keyboards are losing the insert key,
so having an alternate modifier is important.
I know that you can also set the keyboard to laptop, but don't know the
commands there, so have no idea if that'll help you at all or not.
Good luck,
Travis

----- Original Message -----
From: "Melissa Galbraith" <wvflutist@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Monday, October 10, 2016 12:41 PM
Subject: [nvda] keyboard question


I'm using NVDA and am not sure of all the hotkeys. The keyboards I am
using don't have the insert key, and I read in an article last night
that the insert key is being phased out. Many of the ewer keyboarders
don't feature it. How in the world am I supposed to do some of the
commands with out it.?


Melissa


Re: keyboard question

Gene
 

The caps lock key is on the left side of the keyboard.  While this will be convenient for some commands that use the NVDA key and another key on the right side of the keyboard, it is hardly convenient for commands such as read tible bar, NVDA t or read dialog, NVDA b or sor doing things like turning speech on and off, NVDA s.  If you want to use NVDA with the intended level of convenience, you either need to get another keyboard or use the lap top layout instead or you can get a USB numpad, which will have an insert key.  You can then continue to use your current keyboard and use the insert on the USB keyboard.
 
Gene

----- Original Message -----
Sent: Monday, October 10, 2016 3:07 PM
Subject: Re: [nvda] keyboard question

Melissa,

Set NVDA to use the caps-lock key.  I believe this can be done on the NVDA opening menu.



Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher@...

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Melissa Galbraith
Sent: Monday, October 10, 2016 2:41 PM
To: nvda@nvda.groups.io
Subject: [nvda] keyboard question

I'm using NVDA and am not sure of all the hotkeys.  The keyboards I am using don't have the insert key, and I read in an article last night that the insert key is being phased out.  Many of the ewer keyboarders don't feature it.  How in the world am I supposed to do some of the commands with out it.?


Melissa








Re: keyboard question

Louis Maher <ljmaher@...>
 

Melissa,

Set NVDA to use the caps-lock key. I believe this can be done on the NVDA opening menu.



Regards
Louis Maher
Phone: 713-444-7838
E-mail: ljmaher@swbell.net

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Melissa Galbraith
Sent: Monday, October 10, 2016 2:41 PM
To: nvda@nvda.groups.io
Subject: [nvda] keyboard question

I'm using NVDA and am not sure of all the hotkeys. The keyboards I am using don't have the insert key, and I read in an article last night that the insert key is being phased out. Many of the ewer keyboarders don't feature it. How in the world am I supposed to do some of the commands with out it.?


Melissa


Re: keyboard question

Tyler Spivey
 

Go to the NVDA menu, preferences, Keyboard settings.
Select Use CapsLock as an NVDA modifier key.

On 10/10/2016 12:41 PM, Melissa Galbraith wrote:
I'm using NVDA and am not sure of all the hotkeys. The keyboards I am
using don't have the insert key, and I read in an article last night
that the insert key is being phased out. Many of the ewer keyboarders
don't feature it. How in the world am I supposed to do some of the
commands with out it.?


Melissa



keyboard question

Melissa G <wvflutist@...>
 

I'm using NVDA and am not sure of all the hotkeys. The keyboards I am using don't have the insert key, and I read in an article last night that the insert key is being phased out. Many of the ewer keyboarders don't feature it. How in the world am I supposed to do some of the commands with out it.?


Melissa


Re: Disturbing NVDA Remote Rumor: any ruth or verification?

jeremy <icu8it2@...>
 

I don't really have any opinions on weather or not Tyler S had malicious intent in the development of the remote AddOn, but I do think it'd be just a little weird for him to do such a thing, most especially for the rest of his contributions he's made towards other accessible projects.

I'd also point out that Tyler S wasn't the only one who assisted in the development of the Addon, something I didn't see mentioned in the fb post. As I recall, the development was carried out by two people, so if it does turn out that something weird is going on, I'd be looking at everyone, not just one dude who's done a hell of a lot for the accessible community.

Buddy Brannan wrote:

On a shared copy of the post, he posted a comment to the effect that the exploit was with NVDA itself, by sending a large amount of text through it all at once. I don't even know if he's on this list and can elaborate himself.

--
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy@brannan.name




On Oct 10, 2016, at 1:27 PM, Joseph Lee <joseph.lee22590@gmail.com> wrote:

Hi,
Okay... I'd like to know where Tyler L is getting this information. Based on
that post, it appears someone may have told him what's up. I'm keeping an
eye on Twitter to find out what's up as well.
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Buddy
Brannan
Sent: Monday, October 10, 2016 10:10 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Disturbing NVDA Remote Rumor: any ruth or verification?

This should work:
https://m.facebook.com/story.php?story_fbid=10210482594480519&id=1214464156&
refid=17&ref=m_notif&notif_t=feed_comment_reply&_ft_=top_level_post_id.10210
482594480519%3Atl_objid.10210482594480519%3Athid.1214464156%3A30606112949941
4%3A2%3A0%3A1477983599%3A-8014300897192678334&__tn__=%2As


--
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy@brannan.name




On Oct 10, 2016, at 1:02 PM, Joseph Lee <joseph.lee22590@gmail.com> wrote:

Hi everyone,
I was alerted to this by Derek Riemer, and am keeping an eye on this
development. According to what I'm seeing, this is quite disturbing if the
claims are to be believed. What we need at this point is evidence that
proves what the below Facebook message says (one of the evidence needed is
the URL to that post).
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Buddy
Brannan
Sent: Monday, October 10, 2016 7:43 AM
To: nvda@nvda.groups.io
Subject: [nvda] Disturbing NVDA Remote Rumor: any ruth or verification?

Just saw this on Facebook:

All of my blind NVDA friends: If you have used, currently use or plan on
using NVDA remote, I recommend you stop now and remove it. There is at
least
one exploit where someone can crash a system, whether or not it is enabled
to be controlled. This exploit is being used by Tyler Spivy, one of the
authors of the project. Many more may exist and through an inspection of
the
code probably do. Please circulate this to as many people as possible.
Thanks.


Disturbing if true. Given some of Tyler's past exploits, well, one would
hope he'd grown up since those. If true, this certainly won't help open
source in general, NVDA in particular, or future crowdfunding for AT.

--
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy@brannan.name














NVDA Remote crash incident: trust and ethics are important just as technology is, never give out passwords publicly, developer responsibilities

 

Dear NVDA community:

 

I give you permission to pass out the following to other community members:

 

Dear users of NVDA Remote Support add-on:

 

On the morning of October 10, 2016, a group of users connected via nvdaremote.com experienced a general client crash, with the root of the problem being a series of events that led to NVDA crashing with long strings passed to a particular synthesizer. The event unfolded as follows:

 

In the evening of October 9, 2016, someone posted a message to a public forum which included giving out his remote client password, with an “invitation” for anyone to connect to his computer. Within moments, several people connected to the poster’s computer, but then the host disconnected. A few moments later, the server admin came in using the published password, changed some configurations and crashed NVDA by letting clients read long strings and making their keyboards unusable. An audio recording was published that provides some live evidence, with people posting on social media advising others to stop using this, labeling this as “unsecure”.

 

In light of this incident, as a community add-ons representative, I’d like to request that add-on users follow these guidelines:

 

1.      Never give out NVDA remote session password publicly.

2.      The Remote host must provide the password and this should be done privately.

3.      The Remote client must tell host what he or she is going to do so the host can be aware of what’s going on.

4.      The host should try to inform clients that he or she is disconnecting so clients can disconnect properly.

 

Also, as an add-on developer, I’d like to propose the following action plan in the future:

 

1.      Please examine evidence you can find before coming to the conclusion that things are insecure.

2.      Developers should provide responses as soon as possible when evidence becomes available.

 

The add-on can be found in our NVDA Community Add-ons website. Although there is some things about this add-on that have contributed to this incident, the ultimate root cause has to do with irresponsible user actions.

 

Thank you.

Cheers,

Joseph


Re: outlook.com

Kenny Dog <hurrikennyandopo@...>
 

Hi Marisane


I have not been up there for a while to have a look on how to navigate it with NVDA. I did notice they changed the layout and found it hard to navigate it. It is like a page at a time.


Any how I ended up putting mozilla thunder bird onto the pc. I then looked up the settings which if i remember right it got automatically and now download the emails to mozilla thunder bird now.


If you do want to put on mozilla thunder bird check out the following page at https://support.mozilla.org/en-US/kb/thunderbird-and-hotmail

I am using the same setup now with mozilla thunder bird.


I might even sus it out with nvda on the outlook.com website to see what it is like.


I know when I used one browser it was better than the other.


Gene nz



On 11/10/2016 7:51 AM, Marisane Moruthanyana wrote:

Hi guys

 

I need your help here.

 

I am using nvda as my screen reader.

 

I am stuck with outlook.com.

 

It seems to have been terrifically changed and become inaccessible with nvda.

 

I just cannot navigate the interface and am always stuck.

 

Would you please help?

 

What is access bridge?

 

How does it work?

 

Where is it found?

 

Am I right to say that outlook.com has gone too java?

 

Will access bridge help in this regard?

 

Your helpis appreciate in advance.

 

With respect

Marisane


-- 
Check out my website for nvda tutorials and other blindness related material at http://www.accessibilitycentral.net


writing in forums on the web

Rayette Rucker <rayette.rucker23@...>
 

So, how do I fill out forums on the web with the web applications thing with NVDA?


--
Check out my blog at https://therapyramblings.wordpress.com


outlook.com

Marisane Moruthanyana
 

Hi guys

 

I need your help here.

 

I am using nvda as my screen reader.

 

I am stuck with outlook.com.

 

It seems to have been terrifically changed and become inaccessible with nvda.

 

I just cannot navigate the interface and am always stuck.

 

Would you please help?

 

What is access bridge?

 

How does it work?

 

Where is it found?

 

Am I right to say that outlook.com has gone too java?

 

Will access bridge help in this regard?

 

Your helpis appreciate in advance.

 

With respect

Marisane


Re: Disturbing NVDA Remote Rumor: any ruth or verification?

 

Hi,
Some synthesizers are known to crash under some circumstances. If it can be
reproduced on all synths, then this is something to do with NVDA's speech
module, otherwise I'd question what synth people involved in this rumor were
using. I'll write a formal response to this once I gather more information.
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Buddy
Brannan
Sent: Monday, October 10, 2016 10:39 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Disturbing NVDA Remote Rumor: any ruth or verification?

On a shared copy of the post, he posted a comment to the effect that the
exploit was with NVDA itself, by sending a large amount of text through it
all at once. I don't even know if he's on this list and can elaborate
himself.

--
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy@brannan.name




On Oct 10, 2016, at 1:27 PM, Joseph Lee <joseph.lee22590@gmail.com> wrote:

Hi,
Okay... I'd like to know where Tyler L is getting this information. Based
on
that post, it appears someone may have told him what's up. I'm keeping an
eye on Twitter to find out what's up as well.
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Buddy
Brannan
Sent: Monday, October 10, 2016 10:10 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Disturbing NVDA Remote Rumor: any ruth or
verification?

This should work:
https://m.facebook.com/story.php?story_fbid=10210482594480519&id=1214464156&
refid=17&ref=m_notif&notif_t=feed_comment_reply&_ft_=top_level_post_id.10210
482594480519%3Atl_objid.10210482594480519%3Athid.1214464156%3A30606112949941
4%3A2%3A0%3A1477983599%3A-8014300897192678334&__tn__=%2As


--
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy@brannan.name




On Oct 10, 2016, at 1:02 PM, Joseph Lee <joseph.lee22590@gmail.com>
wrote:

Hi everyone,
I was alerted to this by Derek Riemer, and am keeping an eye on this
development. According to what I'm seeing, this is quite disturbing if
the
claims are to be believed. What we need at this point is evidence that
proves what the below Facebook message says (one of the evidence needed
is
the URL to that post).
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Buddy
Brannan
Sent: Monday, October 10, 2016 7:43 AM
To: nvda@nvda.groups.io
Subject: [nvda] Disturbing NVDA Remote Rumor: any ruth or verification?

Just saw this on Facebook:

All of my blind NVDA friends: If you have used, currently use or plan on
using NVDA remote, I recommend you stop now and remove it. There is at
least
one exploit where someone can crash a system, whether or not it is
enabled
to be controlled. This exploit is being used by Tyler Spivy, one of the
authors of the project. Many more may exist and through an inspection of
the
code probably do. Please circulate this to as many people as possible.
Thanks.


Disturbing if true. Given some of Tyler's past exploits, well, one would
hope he'd grown up since those. If true, this certainly won't help open
source in general, NVDA in particular, or future crowdfunding for AT.

--
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy@brannan.name















Re: Disturbing NVDA Remote Rumor: any ruth or verification?

Buddy Brannan
 

On a shared copy of the post, he posted a comment to the effect that the exploit was with NVDA itself, by sending a large amount of text through it all at once. I don't even know if he's on this list and can elaborate himself.

--
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy@brannan.name

On Oct 10, 2016, at 1:27 PM, Joseph Lee <joseph.lee22590@gmail.com> wrote:

Hi,
Okay... I'd like to know where Tyler L is getting this information. Based on
that post, it appears someone may have told him what's up. I'm keeping an
eye on Twitter to find out what's up as well.
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Buddy
Brannan
Sent: Monday, October 10, 2016 10:10 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Disturbing NVDA Remote Rumor: any ruth or verification?

This should work:
https://m.facebook.com/story.php?story_fbid=10210482594480519&id=1214464156&
refid=17&ref=m_notif&notif_t=feed_comment_reply&_ft_=top_level_post_id.10210
482594480519%3Atl_objid.10210482594480519%3Athid.1214464156%3A30606112949941
4%3A2%3A0%3A1477983599%3A-8014300897192678334&__tn__=%2As


--
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy@brannan.name




On Oct 10, 2016, at 1:02 PM, Joseph Lee <joseph.lee22590@gmail.com> wrote:

Hi everyone,
I was alerted to this by Derek Riemer, and am keeping an eye on this
development. According to what I'm seeing, this is quite disturbing if the
claims are to be believed. What we need at this point is evidence that
proves what the below Facebook message says (one of the evidence needed is
the URL to that post).
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Buddy
Brannan
Sent: Monday, October 10, 2016 7:43 AM
To: nvda@nvda.groups.io
Subject: [nvda] Disturbing NVDA Remote Rumor: any ruth or verification?

Just saw this on Facebook:

All of my blind NVDA friends: If you have used, currently use or plan on
using NVDA remote, I recommend you stop now and remove it. There is at
least
one exploit where someone can crash a system, whether or not it is enabled
to be controlled. This exploit is being used by Tyler Spivy, one of the
authors of the project. Many more may exist and through an inspection of
the
code probably do. Please circulate this to as many people as possible.
Thanks.


Disturbing if true. Given some of Tyler's past exploits, well, one would
hope he'd grown up since those. If true, this certainly won't help open
source in general, NVDA in particular, or future crowdfunding for AT.

--
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy@brannan.name















Re: Disturbing NVDA Remote Rumor: any ruth or verification?

 

Hi,
Okay... I'd like to know where Tyler L is getting this information. Based on
that post, it appears someone may have told him what's up. I'm keeping an
eye on Twitter to find out what's up as well.
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Buddy
Brannan
Sent: Monday, October 10, 2016 10:10 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Disturbing NVDA Remote Rumor: any ruth or verification?

This should work:
https://m.facebook.com/story.php?story_fbid=10210482594480519&id=1214464156&
refid=17&ref=m_notif&notif_t=feed_comment_reply&_ft_=top_level_post_id.10210
482594480519%3Atl_objid.10210482594480519%3Athid.1214464156%3A30606112949941
4%3A2%3A0%3A1477983599%3A-8014300897192678334&__tn__=%2As


--
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy@brannan.name




On Oct 10, 2016, at 1:02 PM, Joseph Lee <joseph.lee22590@gmail.com> wrote:

Hi everyone,
I was alerted to this by Derek Riemer, and am keeping an eye on this
development. According to what I'm seeing, this is quite disturbing if the
claims are to be believed. What we need at this point is evidence that
proves what the below Facebook message says (one of the evidence needed is
the URL to that post).
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Buddy
Brannan
Sent: Monday, October 10, 2016 7:43 AM
To: nvda@nvda.groups.io
Subject: [nvda] Disturbing NVDA Remote Rumor: any ruth or verification?

Just saw this on Facebook:

All of my blind NVDA friends: If you have used, currently use or plan on
using NVDA remote, I recommend you stop now and remove it. There is at
least
one exploit where someone can crash a system, whether or not it is enabled
to be controlled. This exploit is being used by Tyler Spivy, one of the
authors of the project. Many more may exist and through an inspection of
the
code probably do. Please circulate this to as many people as possible.
Thanks.


Disturbing if true. Given some of Tyler's past exploits, well, one would
hope he'd grown up since those. If true, this certainly won't help open
source in general, NVDA in particular, or future crowdfunding for AT.

--
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy@brannan.name










Re: Disturbing NVDA Remote Rumor: any ruth or verification?

Buddy Brannan
 

On Oct 10, 2016, at 1:02 PM, Joseph Lee <joseph.lee22590@gmail.com> wrote:

Hi everyone,
I was alerted to this by Derek Riemer, and am keeping an eye on this
development. According to what I'm seeing, this is quite disturbing if the
claims are to be believed. What we need at this point is evidence that
proves what the below Facebook message says (one of the evidence needed is
the URL to that post).
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Buddy
Brannan
Sent: Monday, October 10, 2016 7:43 AM
To: nvda@nvda.groups.io
Subject: [nvda] Disturbing NVDA Remote Rumor: any ruth or verification?

Just saw this on Facebook:

All of my blind NVDA friends: If you have used, currently use or plan on
using NVDA remote, I recommend you stop now and remove it. There is at least
one exploit where someone can crash a system, whether or not it is enabled
to be controlled. This exploit is being used by Tyler Spivy, one of the
authors of the project. Many more may exist and through an inspection of the
code probably do. Please circulate this to as many people as possible.
Thanks.


Disturbing if true. Given some of Tyler's past exploits, well, one would
hope he'd grown up since those. If true, this certainly won't help open
source in general, NVDA in particular, or future crowdfunding for AT.

--
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy@brannan.name










Re: Disturbing NVDA Remote Rumor: any ruth or verification?

 

Hi everyone,
I was alerted to this by Derek Riemer, and am keeping an eye on this
development. According to what I'm seeing, this is quite disturbing if the
claims are to be believed. What we need at this point is evidence that
proves what the below Facebook message says (one of the evidence needed is
the URL to that post).
Cheers,
Joseph

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Buddy
Brannan
Sent: Monday, October 10, 2016 7:43 AM
To: nvda@nvda.groups.io
Subject: [nvda] Disturbing NVDA Remote Rumor: any ruth or verification?

Just saw this on Facebook:

All of my blind NVDA friends: If you have used, currently use or plan on
using NVDA remote, I recommend you stop now and remove it. There is at least
one exploit where someone can crash a system, whether or not it is enabled
to be controlled. This exploit is being used by Tyler Spivy, one of the
authors of the project. Many more may exist and through an inspection of the
code probably do. Please circulate this to as many people as possible.
Thanks.


Disturbing if true. Given some of Tyler's past exploits, well, one would
hope he'd grown up since those. If true, this certainly won't help open
source in general, NVDA in particular, or future crowdfunding for AT.

--
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy@brannan.name


Re: official address for subscribing to the thunderbird email list

Joe Hunter <joehunter@...>
 

it can take a few hourse should be ok by tomorrow.

On 10/10/2016 16:26, Rosemarie Chavarria wrote:
I got a confirmation message and replied to it but I haven't heard anything back from the group.




On 10/10/2016 2:26 AM, Joe Hunter wrote:
You where almost there try the below subscription


thunderbird-subscribe@yahoogroups.com

still put subscribe in the suject line.


On 10/10/2016 06:37, Rosemarie Chavarria wrote:
Hi, everyone,


What's the email address to subscribe to the official thunderbird list? I tried


thunderbird@yahoogroups.com


and typed "subscribe" in the subject line but that didn't work.


Thanks for your help in advance.


Rosemarie











Re: official address for subscribing to the thunderbird email list

Rosemarie Chavarria
 

I got a confirmation message and replied to it but I haven't heard anything back from the group.

On 10/10/2016 2:26 AM, Joe Hunter wrote:
You where almost there try the below subscription


thunderbird-subscribe@yahoogroups.com

still put subscribe in the suject line.


On 10/10/2016 06:37, Rosemarie Chavarria wrote:
Hi, everyone,


What's the email address to subscribe to the official thunderbird list? I tried


thunderbird@yahoogroups.com


and typed "subscribe" in the subject line but that didn't work.


Thanks for your help in advance.


Rosemarie








Re: Disturbing NVDA Remote Rumor: any ruth or verification?

 

It strikes me that the add-on is apparently not developing anymore. See their issue tracker at https://github.com/NVDARemote/NVDARemote/issues.


Artin Dekker
Beheerder win10-nl mailgroep
https://win10-nl.groups.io/g/algemeen

Op 10-10-2016 om 16:43 schreef Buddy Brannan:

Just saw this on Facebook:

All of my blind NVDA friends: If you have used, currently use or plan on using NVDA remote, I recommend you stop now and remove it. There is at least one exploit where someone can crash a system, whether or not it is enabled to be controlled. This exploit is being used by Tyler Spivy, one of the authors of the project. Many more may exist and through an inspection of the code probably do. Please circulate this to as many people as possible. Thanks.


Disturbing if true. Given some of Tyler's past exploits, well, one would hope he'd grown up since those. If true, this certainly won't help open source in general, NVDA in particular, or future crowdfunding for AT.

--
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194
Mobile: 814-431-0962
Email: buddy@brannan.name






Re: A more advanced/evolved SwitchSynth NVDA AddOn?

Tyler Spivey
 

The Switch Synth addon on the NVDA add-ons site does this.

On 10/10/2016 8:08 AM, Gerardo Corripio wrote:
HI listers
As a duallingual user, I use SwitchSynth to on the fly, change between
Eloquence LatinAmerican and American English, but wonder is there a
more-evolved version or something similar to the SwitchSynth that would
allow me to make this on-the-fly synth switching possible with NVDA, and
that incorporates independent volume and voice speed settings for each
language set up? Thanks for info.


A more advanced/evolved SwitchSynth NVDA AddOn?

Gerardo Corripio
 

HI listers
As a duallingual user, I use SwitchSynth to on the fly, change between Eloquence LatinAmerican and American English, but wonder is there a more-evolved version or something similar to the SwitchSynth that would allow me to make this on-the-fly synth switching possible with NVDA, and that incorporates independent volume and voice speed settings for each language set up? Thanks for info.

--
Enviado desde mi lap
Gerardo J Corripio Flores Psicólogo, Terapéuta Reiki
Saludos desde Tampico, Tamaulipas México