nvda@nvda.groups.io

Re: Python pring function with flush=True NVDA not reading the updated messages in Windows PowerShell

Gabriele Battaglia

#95442

Reply to William's message, wrote on 16/05/2022 at 11:26:
Hi Gabe.

I just posted this question in nvda-dev but so far I have not received any feedback.
Ops. I hope someone answer later.

Do you have the same issue also if you print a return, \n, after the value?

Gabe.

Re: Python pring function with flush=True NVDA not reading the updated messages in Windows PowerShell

William

#95441

Hi Gabe.

I just posted this question in nvda-dev but so far I have not received any feedback.

Gabriele Battaglia via groups.io 於 16/5/2022 16:51 寫道:

Show quoted text

Hi William.

I just joined the dev's group but I'm asking if you already posted this question there and if you got some answers.

I'm very interested in this topic because I have this issue also.

Thanks.

Gabe.

Re: Python pring function with flush=True NVDA not reading the updated messages in Windows PowerShell

Gabriele Battaglia

#95440

Hi William.

I just joined the dev's group but I'm asking if you already posted this question there and if you got some answers.

I'm very interested in this topic because I have this issue also.

Thanks.

Gabe.

Re: CodeFactory Eloquence with NVDA 2022.1?

Socheat

#95439

Yeah, ATGuys indeed supportive than CF, but unfortunately they just a reseller, so they can't do anything in term of compatibility breaking release.

Show quoted text

------ Original Message ------

From "Sarah k Alawami" <marrie12@...>

To nvda@nvda.groups.io

Date 5/15/2022 11:43:23 PM

Subject Re: [nvda] CodeFactory Eloquence with NVDA 2022.1?

I’m not begiign to regret the choice but I am. I bought it through ATGuys who are wonderful but I have not even updated this thing since I bought it last July during a sale. It’s sad really. AtGuys are better than CF in terms of support, I have had to talk to them and get help before.

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Socheat
Sent: Saturday, May 14, 2022 10:11 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] CodeFactory Eloquence with NVDA 2022.1?

Code Factory always has poor support for everything. Also bought them too.

------ Original Message ------
From "Chris Smart" <ve3rwj@...>
To nvda@nvda.groups.io
Date 5/15/2022 2:18:21 AM
Subject [nvda] CodeFactory Eloquence with NVDA 2022.1?

Before I email CodeFactory, has anybody else gotten an answer from them as to when their add-on will work with NVDA 2022.1?

Chris, starting to wish I hadn’t given them my money

Re: Python pring function with flush=True NVDA not reading the updated messages in Windows PowerShell

William

#95438

Noted, thanks.

Quentin Christensen 於 16/5/2022 11:22 寫道:

Show quoted text

Hi William,

You might get more responses for these Python questions in the NVDA developer group: https://groups.io/g/nvda-devel

Kind regards

Quentin.

On Sat, May 14, 2022 at 7:04 PM William <xsuper.sillyx@...> wrote:

Hello,

This question is partly related to NVDA and partly related to Windows
PowerShell.

Supposed I have the following python script and stored in a python file
'test.py', which print out a new string of text after every second.

import time

for i in np.arange(10):

print('Sleeping', f"{str(round((i-1)/secs*100,
0)).removesuffix('.0')}%", end="\r", flush=True)

time.sleep(1)

1. I open Windows PowerShell

2. type python test.py

3. the script starts running

I am expecting that NVDA can automatically speak out the new string of
text, but in my test, after the first 'Spleeping...' was spoken, NVDA
did not speak the updated messages.

What can I do to make NVDA speak the updated messages? Thanks.

William

--

Quentin Christensen
Training and Support Manager

Web: www.nvaccess.org

Training: https://www.nvaccess.org/shop/

Certification: https://certification.nvaccess.org/

User group: https://nvda.groups.io/g/nvda

Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess

Re: Punctuation

Sarah k Alawami

#95437

Yes and the slash is called a stroke. Makes sence if you think about it. It looks like the stroke of a pen. Interesting history of words etc. I love history of words, but then again I am a teacher for what ever that’s worth.

Show quoted text

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Quentin Christensen
Sent: Sunday, May 15, 2022 8:08 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Punctuation

Apparently the "!" being called "bang" goes back to the 1950s and either comic books (which portrayed a speech bubble with ! in it coming out of a gun to signify it being fired, hence 'bang') - or typesetting manuals: https://english.stackexchange.com/questions/62918/why-is-the-exclamation-mark-called-a-bang. I've never heard it used anywhere other than screen readers (not just NVDA).

I can't readily find a reference for the apostrophe being called tick. In ASCII the grave accent is called the "back tick", and I assume that would have come from the same source.

I assume screen readers picked up those two names from the ascii and other similar references, but also because both are shorter to say than their more common names. (Or at least more common here in Australia, I'm not sure whether either term is used - outside screen readers - to describe those symbols in other countries?

Fiddlesticks, I used my linguistic nerd quota in In-Process for the month last edition, maybe I can explore this in a future In-Process!

(Fiddlesticks of course from "Fiddle Sticks", the bows used to play violins, from the 15th century "fydylstyks").

Ok I'll stop now :)

On Fri, May 13, 2022 at 11:27 PM Steve Nutt <steve@...> wrote:

I’ve often wondered why NVDA calls the apostrophe a tick?

I guess the same reason that it calls an exclamation mark a bang, but it’s curious wording for the apostrophe.

All the best

Steve

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Quentin Christensen
Sent: 05 May 2022 23:47
To: nvda@nvda.groups.io
Cc: nvda@groups.io
Subject: Re: [nvda] Punctuationp

When are they being read?

If I write:
Don't!

And up arrow onto that line, NVDA will read simply the word "don't", without articulating either the apostrophe or exclamation mark.

That happens with punctuation level set to none, some or most. If I have punctuation level set to all then NVDA reads "don tick t bang".

If I right arrow through the word, then NVDA will always read "d o n tick t bang" regardless of the punctuation level

Given you worded them "apostrphe" and "exclamation" have you edited the "punctuation / symbol pronunciation" or dictionary?

In the punctuation / symbol pronunciation dialog, there are two entries for each. Press the exclamation ! to jump to each of its entries. Press apostrophe ' to jump to it's entry used when it is on its own. The in-word apostrophe is three above the other one. All four are set to symbol level "all" by default.

On Fri, May 6, 2022 at 1:20 AM Peter Beasley <pjbeasley23@...> wrote:
I have tried everything but am unable to stop NVDA form announcing exclamation and apostrophe.
Sent from Mail for Windows

--
Quentin Christensen
Training and Support Manager

Web: www.nvaccess.org
Training: https://www.nvaccess.org/shop/
Certification: https://certification.nvaccess.org/
User group: https://nvda.groups.io/g/nvda
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess

--

Quentin Christensen
Training and Support Manager

Web: www.nvaccess.org

Training: https://www.nvaccess.org/shop/

Certification: https://certification.nvaccess.org/

User group: https://nvda.groups.io/g/nvda

Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess

Re: what's up with this player?

Gene

#95436

I tried that and it didn't work when I did. If it did when you tried it, that's fine.

Gene

Show quoted text

On 5/15/2022 10:04 PM, Bob Cavanaugh wrote:

Okay, I finally got it to work. Even in browse mode, it works. Just
click the link that says 4, and then the audio will start and the link
will now display as visited, and will change to say 6. That is
completely not logical though.

On 5/15/22, Gene <gsasner@...> wrote:

Here is how you get the player to play.  When you are in the player,
make sure you are at the top.
Turn browse mode off with NVDA space.
Tab until you get to a link that just says link.  It will be two or
three times.
Use NVDA numpad enter to activate the link.  Then use the same command
again to activate it again.  The audio will play.

Gene

On 5/15/2022 7:35 PM, Bob Cavanaugh wrote:

Gene,
Try again. The link you provided directed me to WHTE in
Charlottesville, VA. The station in question is KRSQ in Billings, MT.
That website is hot1019.com, and the player linked to in my original
message on this topic is the one linked from their website.
Jackie, what browser and operating system are you on? I don't get any
audio when I use that link, hence my post to this list. I'm currently
running Windows 10 with Firefox, but have tried this player with IE on
both Windows 10 and Windows 7 also with no luck.

On 5/15/22, Gene <gsasner@...> wrote:

Also, what I described as buttons are actually links so you can't use b
to move to them.  NVDA says link button, so treat them like links.

Gene

On 5/15/2022 4:10 PM, Gene wrote:

Go to the actual station:
https://www.1019hot.com/

Make sure you are at the top of the page.
Move to an unlabeled link that says 58201 and press enter.
You are now on a page with the kind of buttons you would expect, one
of which is a play button.

You were going to the player but it is not being used to stream the
site.

Stations may change their streaming address from time to time. Check
the actual site if something stops working.

Gene

On 5/15/2022 2:38 PM, Bob Cavanaugh wrote:

Hi all,
Hopefully I still get an answer to my other question, but while I'm on
here, what's up with this audio player? I'm currently running Windows
10 with Firefox as my default browser, but this has been a problem
with this station through two operating systems, two browsers, and at
least three computers. Can anyone tell me why I can't get any audio?
The station used to have a prerol add and that would play, but the
station audio wouldn't.
http://m.commotion.com/player/9A14E259-76F4-47D4-AF94-0ED5394282E1_E6C462BB-968B-46CF-B159-C0619A75A171/





.

Re: Python pring function with flush=True NVDA not reading the updated messages in Windows PowerShell

Quentin Christensen

#95435

Hi William,

You might get more responses for these Python questions in the NVDA developer group: https://groups.io/g/nvda-devel

Kind regards

Quentin.

Show quoted text

On Sat, May 14, 2022 at 7:04 PM William <xsuper.sillyx@...> wrote:

Hello,

This question is partly related to NVDA and partly related to Windows
PowerShell.

Supposed I have the following python script and stored in a python file
'test.py', which print out a new string of text after every second.

import time

for i in np.arange(10):

print('Sleeping', f"{str(round((i-1)/secs*100,
0)).removesuffix('.0')}%", end="\r", flush=True)

time.sleep(1)

1. I open Windows PowerShell

2. type python test.py

3. the script starts running

I am expecting that NVDA can automatically speak out the new string of
text, but in my test, after the first 'Spleeping...' was spoken, NVDA
did not speak the updated messages.

What can I do to make NVDA speak the updated messages? Thanks.

William

--

Quentin Christensen
Training and Support Manager

Web: www.nvaccess.org

Training: https://www.nvaccess.org/shop/

Certification: https://certification.nvaccess.org/

User group: https://nvda.groups.io/g/nvda

Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess

Re: Punctuation

Quentin Christensen

#95434

Apparently the "!" being called "bang" goes back to the 1950s and either comic books (which portrayed a speech bubble with ! in it coming out of a gun to signify it being fired, hence 'bang') - or typesetting manuals: https://english.stackexchange.com/questions/62918/why-is-the-exclamation-mark-called-a-bang. I've never heard it used anywhere other than screen readers (not just NVDA).

I can't readily find a reference for the apostrophe being called tick. In ASCII the grave accent is called the "back tick", and I assume that would have come from the same source.

I assume screen readers picked up those two names from the ascii and other similar references, but also because both are shorter to say than their more common names. (Or at least more common here in Australia, I'm not sure whether either term is used - outside screen readers - to describe those symbols in other countries?

Fiddlesticks, I used my linguistic nerd quota in In-Process for the month last edition, maybe I can explore this in a future In-Process!

(Fiddlesticks of course from "Fiddle Sticks", the bows used to play violins, from the 15th century "fydylstyks").

Ok I'll stop now :)

Show quoted text

On Fri, May 13, 2022 at 11:27 PM Steve Nutt <steve@...> wrote:

I’ve often wondered why NVDA calls the apostrophe a tick?

I guess the same reason that it calls an exclamation mark a bang, but it’s curious wording for the apostrophe.

All the best

Steve

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Quentin Christensen
Sent: 05 May 2022 23:47
To: nvda@nvda.groups.io
Cc: nvda@groups.io
Subject: Re: [nvda] Punctuationp

When are they being read?

If I write:
Don't!

And up arrow onto that line, NVDA will read simply the word "don't", without articulating either the apostrophe or exclamation mark.

That happens with punctuation level set to none, some or most. If I have punctuation level set to all then NVDA reads "don tick t bang".

If I right arrow through the word, then NVDA will always read "d o n tick t bang" regardless of the punctuation level

Given you worded them "apostrphe" and "exclamation" have you edited the "punctuation / symbol pronunciation" or dictionary?

In the punctuation / symbol pronunciation dialog, there are two entries for each. Press the exclamation ! to jump to each of its entries. Press apostrophe ' to jump to it's entry used when it is on its own. The in-word apostrophe is three above the other one. All four are set to symbol level "all" by default.

On Fri, May 6, 2022 at 1:20 AM Peter Beasley <pjbeasley23@...> wrote:
I have tried everything but am unable to stop NVDA form announcing exclamation and apostrophe.
Sent from Mail for Windows

--
Quentin Christensen
Training and Support Manager

Web: www.nvaccess.org
Training: https://www.nvaccess.org/shop/
Certification: https://certification.nvaccess.org/
User group: https://nvda.groups.io/g/nvda
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess

--

Quentin Christensen
Training and Support Manager

Web: www.nvaccess.org

Training: https://www.nvaccess.org/shop/

Certification: https://certification.nvaccess.org/

User group: https://nvda.groups.io/g/nvda

Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess

Re: what's up with this player?

Bob Cavanaugh

#95433

Okay, I finally got it to work. Even in browse mode, it works. Just
click the link that says 4, and then the audio will start and the link
will now display as visited, and will change to say 6. That is
completely not logical though.

Show quoted text

On 5/15/22, Gene <gsasner@...> wrote:
Here is how you get the player to play.  When you are in the player,
make sure you are at the top.
Turn browse mode off with NVDA space.
Tab until you get to a link that just says link.  It will be two or
three times.
Use NVDA numpad enter to activate the link.  Then use the same command
again to activate it again.  The audio will play.

Gene

On 5/15/2022 7:35 PM, Bob Cavanaugh wrote:
Gene,
Try again. The link you provided directed me to WHTE in
Charlottesville, VA. The station in question is KRSQ in Billings, MT.
That website is hot1019.com, and the player linked to in my original
message on this topic is the one linked from their website.
Jackie, what browser and operating system are you on? I don't get any
audio when I use that link, hence my post to this list. I'm currently
running Windows 10 with Firefox, but have tried this player with IE on
both Windows 10 and Windows 7 also with no luck.

On 5/15/22, Gene <gsasner@...> wrote:
Also, what I described as buttons are actually links so you can't use b
to move to them.  NVDA says link button, so treat them like links.

Gene

On 5/15/2022 4:10 PM, Gene wrote:
Go to the actual station:
https://www.1019hot.com/

Make sure you are at the top of the page.
Move to an unlabeled link that says 58201 and press enter.
You are now on a page with the kind of buttons you would expect, one
of which is a play button.

You were going to the player but it is not being used to stream the
site.

Stations may change their streaming address from time to time. Check
the actual site if something stops working.

Gene

On 5/15/2022 2:38 PM, Bob Cavanaugh wrote:
Hi all,
Hopefully I still get an answer to my other question, but while I'm on
here, what's up with this audio player? I'm currently running Windows
10 with Firefox as my default browser, but this has been a problem
with this station through two operating systems, two browsers, and at
least three computers. Can anyone tell me why I can't get any audio?
The station used to have a prerol add and that would play, but the
station audio wouldn't.
http://m.commotion.com/player/9A14E259-76F4-47D4-AF94-0ED5394282E1_E6C462BB-968B-46CF-B159-C0619A75A171/





.

Re: what's up with this player?

Jackie

#95432

FF 100 Win 10 21H2.

Show quoted text

On 5/15/22, Gene <gsasner@...> wrote:
Here is how you get the player to play.  When you are in the player,
make sure you are at the top.
Turn browse mode off with NVDA space.
Tab until you get to a link that just says link.  It will be two or
three times.
Use NVDA numpad enter to activate the link.  Then use the same command
again to activate it again.  The audio will play.

Gene

On 5/15/2022 7:35 PM, Bob Cavanaugh wrote:
Gene,
Try again. The link you provided directed me to WHTE in
Charlottesville, VA. The station in question is KRSQ in Billings, MT.
That website is hot1019.com, and the player linked to in my original
message on this topic is the one linked from their website.
Jackie, what browser and operating system are you on? I don't get any
audio when I use that link, hence my post to this list. I'm currently
running Windows 10 with Firefox, but have tried this player with IE on
both Windows 10 and Windows 7 also with no luck.

On 5/15/22, Gene <gsasner@...> wrote:
Also, what I described as buttons are actually links so you can't use b
to move to them.  NVDA says link button, so treat them like links.

Gene

On 5/15/2022 4:10 PM, Gene wrote:
Go to the actual station:
https://www.1019hot.com/

Make sure you are at the top of the page.
Move to an unlabeled link that says 58201 and press enter.
You are now on a page with the kind of buttons you would expect, one
of which is a play button.

You were going to the player but it is not being used to stream the
site.

Stations may change their streaming address from time to time. Check
the actual site if something stops working.

Gene

On 5/15/2022 2:38 PM, Bob Cavanaugh wrote:
Hi all,
Hopefully I still get an answer to my other question, but while I'm on
here, what's up with this audio player? I'm currently running Windows
10 with Firefox as my default browser, but this has been a problem
with this station through two operating systems, two browsers, and at
least three computers. Can anyone tell me why I can't get any audio?
The station used to have a prerol add and that would play, but the
station audio wouldn't.
http://m.commotion.com/player/9A14E259-76F4-47D4-AF94-0ED5394282E1_E6C462BB-968B-46CF-B159-C0619A75A171/





.

-- 
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@... with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com

Re: what's up with this player?

Gene

#95431

Here is how you get the player to play. When you are in the player, make sure you are at the top.
Turn browse mode off with NVDA space.
Tab until you get to a link that just says link. It will be two or three times.
Use NVDA numpad enter to activate the link. Then use the same command again to activate it again. The audio will play.

Gene

Show quoted text

On 5/15/2022 7:35 PM, Bob Cavanaugh wrote:

Gene,
Try again. The link you provided directed me to WHTE in
Charlottesville, VA. The station in question is KRSQ in Billings, MT.
That website is hot1019.com, and the player linked to in my original
message on this topic is the one linked from their website.
Jackie, what browser and operating system are you on? I don't get any
audio when I use that link, hence my post to this list. I'm currently
running Windows 10 with Firefox, but have tried this player with IE on
both Windows 10 and Windows 7 also with no luck.

On 5/15/22, Gene <gsasner@...> wrote:

Also, what I described as buttons are actually links so you can't use b
to move to them.  NVDA says link button, so treat them like links.

Gene

On 5/15/2022 4:10 PM, Gene wrote:

Go to the actual station:
https://www.1019hot.com/

Make sure you are at the top of the page.
Move to an unlabeled link that says 58201 and press enter.
You are now on a page with the kind of buttons you would expect, one
of which is a play button.

You were going to the player but it is not being used to stream the site.

Stations may change their streaming address from time to time. Check
the actual site if something stops working.

Gene

On 5/15/2022 2:38 PM, Bob Cavanaugh wrote:

Hi all,
Hopefully I still get an answer to my other question, but while I'm on
here, what's up with this audio player? I'm currently running Windows
10 with Firefox as my default browser, but this has been a problem
with this station through two operating systems, two browsers, and at
least three computers. Can anyone tell me why I can't get any audio?
The station used to have a prerol add and that would play, but the
station audio wouldn't.
http://m.commotion.com/player/9A14E259-76F4-47D4-AF94-0ED5394282E1_E6C462BB-968B-46CF-B159-C0619A75A171/





.

Re: what's up with this player?

Gene

#95430

I'll try that station.

Gene

Show quoted text

On 5/15/2022 7:35 PM, Bob Cavanaugh wrote:

Gene,
Try again. The link you provided directed me to WHTE in
Charlottesville, VA. The station in question is KRSQ in Billings, MT.
That website is hot1019.com, and the player linked to in my original
message on this topic is the one linked from their website.
Jackie, what browser and operating system are you on? I don't get any
audio when I use that link, hence my post to this list. I'm currently
running Windows 10 with Firefox, but have tried this player with IE on
both Windows 10 and Windows 7 also with no luck.

On 5/15/22, Gene <gsasner@...> wrote:

Also, what I described as buttons are actually links so you can't use b
to move to them.  NVDA says link button, so treat them like links.

Gene

On 5/15/2022 4:10 PM, Gene wrote:

Go to the actual station:
https://www.1019hot.com/

Make sure you are at the top of the page.
Move to an unlabeled link that says 58201 and press enter.
You are now on a page with the kind of buttons you would expect, one
of which is a play button.

You were going to the player but it is not being used to stream the site.

Stations may change their streaming address from time to time. Check
the actual site if something stops working.

Gene

On 5/15/2022 2:38 PM, Bob Cavanaugh wrote:

Hi all,
Hopefully I still get an answer to my other question, but while I'm on
here, what's up with this audio player? I'm currently running Windows
10 with Firefox as my default browser, but this has been a problem
with this station through two operating systems, two browsers, and at
least three computers. Can anyone tell me why I can't get any audio?
The station used to have a prerol add and that would play, but the
station audio wouldn't.
http://m.commotion.com/player/9A14E259-76F4-47D4-AF94-0ED5394282E1_E6C462BB-968B-46CF-B159-C0619A75A171/





.

Re: what's up with this player?

Bob Cavanaugh

#95429

Gene,
Try again. The link you provided directed me to WHTE in
Charlottesville, VA. The station in question is KRSQ in Billings, MT.
That website is hot1019.com, and the player linked to in my original
message on this topic is the one linked from their website.
Jackie, what browser and operating system are you on? I don't get any
audio when I use that link, hence my post to this list. I'm currently
running Windows 10 with Firefox, but have tried this player with IE on
both Windows 10 and Windows 7 also with no luck.

Show quoted text

On 5/15/22, Gene <gsasner@...> wrote:
Also, what I described as buttons are actually links so you can't use b
to move to them.  NVDA says link button, so treat them like links.

Gene

On 5/15/2022 4:10 PM, Gene wrote:
Go to the actual station:
https://www.1019hot.com/

Make sure you are at the top of the page.
Move to an unlabeled link that says 58201 and press enter.
You are now on a page with the kind of buttons you would expect, one
of which is a play button.

You were going to the player but it is not being used to stream the site.

Stations may change their streaming address from time to time. Check
the actual site if something stops working.

Gene

On 5/15/2022 2:38 PM, Bob Cavanaugh wrote:
Hi all,
Hopefully I still get an answer to my other question, but while I'm on
here, what's up with this audio player? I'm currently running Windows
10 with Firefox as my default browser, but this has been a problem
with this station through two operating systems, two browsers, and at
least three computers. Can anyone tell me why I can't get any audio?
The station used to have a prerol add and that would play, but the
station audio wouldn't.
http://m.commotion.com/player/9A14E259-76F4-47D4-AF94-0ED5394282E1_E6C462BB-968B-46CF-B159-C0619A75A171/





.

Re: getting the time and date

Howard Traxler

#95428

Thank you folks, for responding.  But now this whole thing has to be on hold.  Thought I had it set; but found it necessary to restart and now the soundcard dongle is not recognized and the machine is silent.  Good thing I have an upstairs machine.  I'll return about this matter at a later date, I hope.

Howard

Show quoted text

On 5/15/2022 1:23 PM, Brian Vogel wrote:
Howard,

How, precisely, did you perform your reset?  That term means a lot of different things to a lot of different people, and the exact technique you used could be a part of your current quandry.  Also, knowing the make and model of your machine along with the Windows 10 Version and Build would be most helpful to potential assistants.
-- 

Brian -Windows 10, 64-Bit, Version 21H2, Build 19044

*/You can't crush ideas by suppressing them. You can only crush them by ignoring them.
/*     ~ Ursula LeGuin, /The Dispossessed/

Re: getting the time and date

Rui Fontes

#95427

I just asked to exclude the possibility of function keys are not working as you expected...

Rui Fontes

Às 23:33 de 15/05/2022, Howard Traxler escreveu:

Show quoted text

it's a desktop; but I have the keyboard set to laptop.

On 5/15/2022 1:16 PM, Rui Fontes wrote:
It is a laptop or a desktop?

Rui

Às 18:47 de 15/05/2022, Howard Traxler escreveu:
I just did a windows reset on my windows 10 computer thinking it would solve all my problems.  Well, it only made things worse.  It blew away everything I had installed.  My particular concern is NVDA. So, I reinstalled NVDAS, (this time, 2.1.3.3).  I'm still not able to read the time with NVDA plus F12.  Now, it just seems to be silent. Maybe the computer is just not displaying the date and time info in a place where NVDA can grab it?  Any suggestions?  I really like this function; it's more accurate than my clock which is also on the desk along side the computer.

Thanks.
Howard

P.S.  I have to try setting up my email again on that machine.

Re: getting the time and date

Howard Traxler

#95426

it's a desktop; but I have the keyboard set to laptop.

Show quoted text

On 5/15/2022 1:16 PM, Rui Fontes wrote:
It is a laptop or a desktop?

Rui

Às 18:47 de 15/05/2022, Howard Traxler escreveu:
I just did a windows reset on my windows 10 computer thinking it would solve all my problems.  Well, it only made things worse.  It blew away everything I had installed.  My particular concern is NVDA. So, I reinstalled NVDAS, (this time, 2.1.3.3).  I'm still not able to read the time with NVDA plus F12.  Now, it just seems to be silent. Maybe the computer is just not displaying the date and time info in a place where NVDA can grab it?  Any suggestions?  I really like this function; it's more accurate than my clock which is also on the desk along side the computer.

Thanks.
Howard

P.S.  I have to try setting up my email again on that machine.

Re: what's up with this player?

Gene

#95425

Also, what I described as buttons are actually links so you can't use b to move to them. NVDA says link button, so treat them like links.

Gene

Show quoted text

On 5/15/2022 4:10 PM, Gene wrote:

Go to the actual station:
https://www.1019hot.com/

Make sure you are at the top of the page.
Move to an unlabeled link that says 58201 and press enter.
You are now on a page with the kind of buttons you would expect, one of which is a play button.

You were going to the player but it is not being used to stream the site.

Stations may change their streaming address from time to time. Check the actual site if something stops working.

Gene

On 5/15/2022 2:38 PM, Bob Cavanaugh wrote:
Hi all,
Hopefully I still get an answer to my other question, but while I'm on
here, what's up with this audio player? I'm currently running Windows
10 with Firefox as my default browser, but this has been a problem
with this station through two operating systems, two browsers, and at
least three computers. Can anyone tell me why I can't get any audio?
The station used to have a prerol add and that would play, but the
station audio wouldn't.
http://m.commotion.com/player/9A14E259-76F4-47D4-AF94-0ED5394282E1_E6C462BB-968B-46CF-B159-C0619A75A171/





.

Re: can't navigate using arrow keys in any edit fields

Michael Hunsaker

#95424

I think the built in navigation tools for sites like Gmail, linked in, Office365 are trying to get in the way. I usually hit F7 (no other modifiers or command keys) to turn off caret browsing and this usually helps. If not, I jump in and out of scan mode and it fixes it.

Michael Ryan Hunsaker, M.Ed., Ph.D. (he/him)
NLS-LOC Certified UEB Transcriber
Teacher for Students with Visual Impairments
Davis School District
CONTACT
I will reply to communication between the hours of 7:15-15:00pm MST

Voice/Text
Office +1 (801) 402-5955
Google Voice +1 (385) 645-7021
(text message or call and leave a voicemail, and I will return your call ASAP)
Email ryhunsaker@...
Mailing Addresses
(Primary)
Davis High School
325 South Main St
Kaysville, UT 84037

(Secondary)
Fairfield Jr. High
951 Fairfield Rd
Kaysville, UT 84037

——————————————————————————
FERPA/HIPPA CONFIDENTIALITY STATEMENT
Please keep in mind that communications via email over the internet are not secure. Although it is unlikely, there is a possibility that information you include in an email can be intercepted and read by other parties besides the person to whom it is addressed.
The contents of this email message and any attachments are intended solely for the addressee(s) and may contain confidential and/or privileged information and may be legally protected from disclosure. If you are not the intended recipient of this message or their agent, or if this message has been addressed to you in error, please immediately alert the sender by reply email and then delete this message and any attachments. If you are not the intended recipient, you are hereby notified that any use, dissemination, copying, or storage of this message or its attachments is strictly prohibited.

<ryhunsaker.vcf>

Re: what's up with this player?

Gene

#95423

Go to the actual station:
https://www.1019hot.com/

Make sure you are at the top of the page.
Move to an unlabeled link that says 58201 and press enter.
You are now on a page with the kind of buttons you would expect, one of which is a play button.

You were going to the player but it is not being used to stream the site.

Stations may change their streaming address from time to time. Check the actual site if something stops working.

Gene

Show quoted text

On 5/15/2022 2:38 PM, Bob Cavanaugh wrote:

Hi all,
Hopefully I still get an answer to my other question, but while I'm on
here, what's up with this audio player? I'm currently running Windows
10 with Firefox as my default browser, but this has been a problem
with this station through two operating systems, two browsers, and at
least three computers. Can anyone tell me why I can't get any audio?
The station used to have a prerol add and that would play, but the
station audio wouldn't.
http://m.commotion.com/player/9A14E259-76F4-47D4-AF94-0ED5394282E1_E6C462BB-968B-46CF-B159-C0619A75A171/





.