Date   

[Solved] Issue with Microsoft Quick Assist & NVDA

Dimitrios Tsakiridis
 

Hello every one, and Good morning from Greece:

 

I install the latest version of Quick assist for Windows 10, from Microsoft store.

The NVDA does not read any think, when I open the application.

I have the latest version of NVDA.

 

Best regards, Dimitrios Tsakiridis.

 

Στάλθηκε από την Αλληλογραφία για τα Windows

 


Re: Issue With This Apparently Phantom Item 'Task Switcher' With Recent Updates of NVDA

Gene
 

It evidently is the name of the interface that comes up when you alt tab.  A sighted person evidently sees the names of all opened programs and we, of course, hear the program that has focus when we alt tab to it.  A Google search for task switcher Windows 10 gave this result and others I didn't look at:
https://www.hongkiat.com/blog/switch-tasks-windows-10/

As for the running short of memory hypothesis, that has no bearing on the question.  If you run short of RAM, programs are swapped to the hard drive when not being used.  If you use alt tab to switch to another program, that program comes out of the swap file and is placed in RAM while the program you were previously using goes into the swap file.  The swapping occurs when you release alt tab on the program you want to switch to.

Gene

On 6/19/2022 2:25 AM, Luke Davis wrote:

I've always assumed it comes up when all switchable (alt+tabbable) applications are busy, and can't re-render their interfaces for some reason. So Windows can't finish switching to them. But that's a wild guess.

I've only ever run into it when I have three or fewer applications open, which is so very rare that I haven't encountered it enough to bother me.

But I'm pretty sure I have encountered it from time to time in Windows 10 of various releases. (I never had Win 7)

Luke







Re: NVDA with Team Viewer.

Brian's Mail list account
 

I'm pretty certain its team viewer. I say this as I had a remote session with a sighted friend and when we started I had an older team viewer and all was sweetness and light. However he decided to do the update on my machine while he was sorting out a problem, and ever since its been the electronic equivalent of a brick.
I think the quick connect temp version will still work, but if you want to do the driving, then they have mucked something up, and I bet its something really stupid. I have not contacted them, as I seldom need it, but it just goes to show that companies still do not do accessibility testing before they unleash new versions.
Brian

--
bglists@...
Sent via blueyonder.(Virgin media)
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Chris Tromborg" <cattromborg@...>
To: <nvda@nvda.groups.io>
Sent: Sunday, June 19, 2022 5:32 AM
Subject: Re: [nvda] NVDA with Team Viewer.


I have had exactly the same experience.



Chris Tromborg, Ph.D.

Mountain Lion Foundation

Feline Conservation Foundation

Behavioral Enrichment for Captive Animals

Animal Communication, Behavior, & Cognition

Feline Conservation & Biology

1-530-753-2763 Home

1-530-902-2763 Cell

<mailto:cattromborg@...> cattromborg@...

<http://www.christromborg.com> www.christromborg.com







From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Ravindran V.S.
Sent: Saturday, June 18, 2022 8:45 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA with Team Viewer.



This is in my Windows 10 with H2 version.



From: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io> <nvda@nvda.groups.io
<mailto:nvda@nvda.groups.io> > On Behalf Of Ravindran V.S. via groups.io
Sent: Sunday, June 19, 2022 9:14 AM
To: nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
Subject: [nvda] NVDA with Team Viewer.



Hi Group,

The latest NVDA Version 22.1 and Team Viewer latest versions does not
provide any useful accessibility.

I am not too sure which has caused this problem. Because I have both latest
versions running.

When I open Team Viewer NVDA does not speak anything. Earlier can move with
Tab and get into the menu and other required cells.

But now nothing.

Even Object navigation does not provide much help.



Anything am I missing or doing wrong?

Team Viewer was fairly accessible with NVDA rather than Any-Desk. But now
giving problem.



Kindly advice.

Thanks,

Ravi.


Re: Frequently Unable to Press Elements On The Web

Brian's Mail list account
 

In my view, this is the web site. I know not enough about page authoring but it seems to me that its normally repeatable on the same objects on the same pages. Indeed on one in the Google email settings it threw me completely out to the desktop and when I found the browser again, it had gone to an earlier page.
Its very hard to judge exactly why, but because there are more than one issues here, it could be that its just too complex to resolve. Dunno.
Brian

--
bglists@...
Sent via blueyonder.(Virgin media)
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Sarah k Alawami" <marrie12@...>
To: <nvda@nvda.groups.io>
Sent: Saturday, June 18, 2022 11:11 PM
Subject: Re: [nvda] Frequently Unable to Press Elements On The Web


I actually just had this fail today in firefox at www.trailhead.com <http://www.trailhead.com> . In fact the thing was off screen when I went into document mode to be sure the page had actually changed, or not changed. Chrome did something worse where the thing would not even activate when I typed in my query on trailhead’s salesforce settings when creating a permission set. I had to go through the whole interface to find where the thing was I had to modify. I then had an add button that would not become active. No, alt tabbing did not work. It took me 3 days to get this assignment done because of that little hiccup. I did get it done but with much hair pulling.



From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Eduardo Fermiano Luccas
Sent: Saturday, June 18, 2022 3:00 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Frequently Unable to Press Elements On The Web



dude, try pressing alt + tab

or: f5



it's a matter of exiting and returning from the window without close



but, you will still have to locate the item sometimes



Em sáb., 18 de jun. de 2022 às 15:36, Bhavya shah <bhavya.shah125@... <mailto:bhavya.shah125@...> > escreveu:

Dear all,

I am using NVDA, Firefox, and Edge (latest stable versions of each but
I have been facing such issues for many months now). Far too
frequently have I been encountering instances wherein Spacebar/Enter
simply does not activate a pressable item (link, button, menu item,
dialog, etc.). Either nothing happens, or the focus jumps in the page
arbitrarily, or a different element in the page is activated, or I am
thrown into another window altogether. This happens on commonplace
websites like Google, LinkedIn, and Doordash as well as less complex
and lesser-known websites. In these cases, I sometimes need to enter
focus mode and retry Spacebar/Enter, sometimes need to manually move
around the navigator object to the control and press
NVDA+Shift+Backspace and then NVDA+Enter, sometimes manually
reposition the navigator object and move the mouse pointer to it and
then simulate a left mouse click, and sometimes try maximizing the
browser's window or closing some other programs whose window may be
interfering (like CCleaner and Google Drive). Even then, sometimes,
none of these strategies succeed. This experience applies to a
minority of pressable elements (<50%), but it is a significant
minority of cases and enough to be a significant inconvenience. I face
this more often in Firefox, but that might be because I use it more
than I do Edge.

I would like to acknowledge that (a) the description of my issue lacks
examples and is somewhat generic, and (b) issues should ideally be
reported on GitHub. This is intentional because in my experience, this
problem is pervasive and issues of this kind have already been
reported on GitHub for months(/years?) to little effect.

Do you face such issues as well? What strategies do you use when
Spacebar/Enter doesn't activate a control like it should? Have you
found one web browser to fare better than another in this respect (say
Edge might be more reliable than Firefox)?

I would be deeply grateful for any thoughts and suggestions.

Kind Regards,
Bhavya Shah
B.S. in Mathematical and Computational Science | Stanford '24
LinkedIn: https://www.linkedin.com/in/bhavyashah125/











--

eduardo fermiano luccas

joinville, brasil

músico e editor de áldio iniciante


Re: Older videos do not load while brousing through channel in video on firefox

Brian's Mail list account
 

Yes if the list is really long it goes very like a search engine, and after the selected number of results, you get next, or more or some other link or button to go through the next page, often it will tell you haw many pages there are but not always. I have also had some strange things like the mute button on the audio track mysteriously being enabled, but that is a whole other issue and may well be google trying to be helpful to screenreader users!

Brian

--
bglists@...
Sent via blueyonder.(Virgin media)
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: <nvdainth@...>
To: <nvda@nvda.groups.io>
Sent: Sunday, June 19, 2022 6:16 AM
Subject: Re: [nvda] Older videos do not load while brousing through channel in video on firefox


I use this trick
go to end of page which you found end of load video
then press NVDA+space to focus mode
and press down
the more video will load
then press NVDA+space to browse mode normally
repeat these step when you want load more video or playlist in Youtube on Firefox


Re: NVDA is not reading out buttons in Chrome browser

Brian's Mail list account
 

Some browsers need to be watched as occasionally, they regress at least from our point of view Waterfox did this and I held off updating for some months till the crashing with nvda randomly was resolved.
I sometimes feel that software writers are too fast at pumping out their updates before exhaustively testing them, particularly with access software.
On the 32 bit thing. I agree, never use the 32 bit ones. Firefox went through a period where the 32 bit at that time was inaccessible, some years back now but it can occur.
Brian

--
bglists@...
Sent via blueyonder.(Virgin media)
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Gene" <gsasner@...>
To: <nvda@nvda.groups.io>
Sent: Saturday, June 18, 2022 6:43 PM
Subject: Re: [nvda] NVDA is not reading out buttons in Chrome browser


You may do things in ways that computer users generally don't do
things. That doesn't mean that the general user should do things in a
different way. Chrome-based browsers update in the background. and on
what do you base your distrust of about dialogs? I haven't seen one
computer advisor nor anyone else say they are unreliable.

I have no objection to you doing things as you wish but you are making
statements and implications that updating Chrome-based browsers as most
computer users do is unreliable or in some way a disadvantage to what
you do, with which I most emphatically disagree.

Gene

On 6/18/2022 12:04 PM, Sarah k Alawami wrote:

I’d rather update through chocolety, as it updates in the background,
and I have about 30 other windows apps I update in this way, all at
once. I don’t trust the about dialogue, ever, not in chrome anyway.
Give me a package manager any day, or give me the installer so I can
just update by hand and keep the follinstaller around in case I have
to reinstall from scratch.

*From:* nvda@nvda.groups.io <nvda@nvda.groups.io> *On Behalf Of *Gene
*Sent:* Saturday, June 18, 2022 8:32 AM
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] NVDA is not reading out buttons in Chrome browser

You don't need to update in that way. Chrome-based browsers are
supposed to automatically update. But instead of installing the
program to update it, if it isn't automatically updating, use the
about dialog. That dialog tells you if an update is available and
there is an update button. Once you open the about dialog, it may be
in slightly different places depending on the Chrome-based browser you
are using, have browse mode on. If you can't move through the
interface with the arrow keys, manually turn on Browse mode and it
will be accessible and similar to a web page. There is information at
or near the top of the page about updating and whether you are up to date.

In Chrome, about is in the help submenu.

Gene

On 6/18/2022 10:24 AM, Sarah k Alawami wrote:

I believe the 64 bit version can also be found on chocolety as
that’s how I update, every few weeks. Much easier for those who
love package managers as I do.

*From:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
<nvda@nvda.groups.io> <mailto:nvda@nvda.groups.io> *On Behalf Of
*Brian Vogel
*Sent:* Saturday, June 18, 2022 8:13 AM
*To:* nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>
*Subject:* Re: [nvda] NVDA is not reading out buttons in Chrome
browser

The issue of downloading Chrome just arose in one of the JAWS groups.

The online installer is always at https://www.google.com/chrome
and the offline installer for the current 64-bit version can be
obtained from:
https://dl.google.com/tag/s/appguid%3D%7B8A69D345-D564-463C-AFF1-A69D9E530F96%7D%26iid%3D%7B7963AE5A-0471-BF21-99EE-0ABC200D2042%7D%26lang%3Den%26browser%3D3%26usagestats%3D0%26appname%3DGoogle%2520Chrome%26needsadmin%3Dprefers%26ap%3Dx64-stable-statsdef_1%26installdataindex%3Dempty/chrome/install/ChromeStandaloneSetup64.exe

--

Brian *-* Windows 10, 64-Bit, Version 21H2, Build 19044

/The real art of conversation is not only to say the right thing
in the right place but to leave unsaid the wrong thing at the
tempting moment./

~ Dorothy Nevill






Re: Issue With This Apparently Phantom Item 'Task Switcher' With Recent Updates of NVDA

Luke Davis
 

I've always assumed it comes up when all switchable (alt+tabbable) applications are busy, and can't re-render their interfaces for some reason. So Windows can't finish switching to them. But that's a wild guess.

I've only ever run into it when I have three or fewer applications open, which is so very rare that I haven't encountered it enough to bother me.

But I'm pretty sure I have encountered it from time to time in Windows 10 of various releases. (I never had Win 7)

Luke


Re: Issue With This Apparently Phantom Item 'Task Switcher' With Recent Updates of NVDA

Brian's Mail list account
 

Yes and the odd thing is once it starts, even closing all the windows means it still stays there.What exactly is the task switcher? Its weird, since one might expect it to contain a list of tasks, but that is on the normal bar and can be used just like always.
It acts a bit like that old problem where NVDA, had its own phantom window which would not be closed, and if somebody managed to close it by the mouse, nvda went away. Not tried that here, assuming there is in fact a way to close it at all.
It seems worse on those running Windows 7 home than any other flavour.
Could it maybe a ram thing, IE if there are a lot of programs open on a machine with not quite enough ram, it then uses the disc as virtual memory, so that then means things start to slow down.
Brian

--
bglists@...
Sent via blueyonder.(Virgin media)
Please address personal E-mail to:-
briang1@..., putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "Ron Canazzi" <aa2vm@...>
To: <nvda@nvda.groups.io>
Sent: Saturday, June 18, 2022 1:14 PM
Subject: Re: [nvda] Issue With This Apparently Phantom Item 'Task Switcher' With Recent Updates of NVDA


Hi Brian,

I haven't used Windows 7 in over 2 years so I can't be sure. I do not remember it happening very much if at all with Windows 7--not enough to write a message to the list anyway. This seems to have gotten worse with later versions of Windows 10 and the newer Windows 11. I turned on/off the windows shade setting in multitasking and I have only seen it once since then--and I tried deliberately by opening 7 windows one after the other to test.


On 6/18/2022 3:55 AM, Brian's Mail list account via groups.io wrote:
Are you sure this is not an intermittent old issue? I'm sure sometimes on Windows 7 this sort of thing happened as well. The only recourse seemed to be to shut and restart nvda then. Sadly I've not used Windows11, so I cannot comment further if its a similar issue.
Brian
--
Signature:
For a nation to admit it has done grievous wrongs and will strive to correct them for the betterment of all is no vice;
For a nation to claim it has always been great, needs no improvement and to cling to its past achievements is no virtue!





Re: Older videos do not load while brousing through channel in video on firefox

Ali Colak
 

I had tried tabbing before but didn't work, the focus mode and down
arrow however, did the trick. Thanks

On 6/19/22, Gene <gsasner@...> wrote:
There is nothing wrong with how Firefox or any other browser is working
with the page.
To see all the uploads, do the following:
Find the button that says uploads.
Turn browse mode off.
\Tab and shift tab to be sure you are on the button.
Press the space bar.
Down arrow to all videos and press enter.

Return to browse mode.
Move to the bottom of the page and below the last item, there is a next
button.  Activate it with the space bar.
You will see more videos if there are more.  As far as I can tell, you
will be able to see everything uploaded in that way by following the
next button until you have moved to the earliest videos.

Gene

On 6/18/2022 11:46 PM, Ali Colak wrote:
Specific examples, in this case, are completely useless, regardless of
weather they are mandatory or optional. The behavior is consistant
over youtube pages. I will post a couple below however.
I also wanted to send the log in debug mode, but though I looked in
temp I couldn't find it there, as I had done before. If anyone can
tellme where to find it, or if clipping pasting the log after opening
log viewer in debug mode will due, I can send that as well.
https://www.youtube.com/channel/UCOmDqU1bEk_jHOsfP9aLWsw/videos

https://www.youtube.com/c/TarihObas%C4%B1/videos

https://www.youtube.com/c/Freecodecamp/videos


On 6/18/22, Brian Vogel <britechguy@...> wrote:
On Sat, Jun 18, 2022 at 06:51 PM, JM Casey wrote:

but I thought they were talking about the youtube display page,
-
I don't care what is being talked about. Specific examples are NOT
optional
when you want others to troubleshoot. This is not news, or rocket
science.

Those doing diagnostics all need to be on in this case literally the
same
page. I've seen people load mobile pages, by intent, on computers and
the
behavior is very different for these. No matter what it is, a single
example, and preferably several, should be provided when asking this kind
of
question. That's anywhere, not just on this group.
--

Brian - Windows 10, 64-Bit, Version 21H2, Build 19044

The real art of conversation is not only to say the right thing in the
right
place but to leave unsaid the wrong thing at the tempting moment.

~ Dorothy Nevill








.






Re: Older videos do not load while brousing through channel in video on firefox

Gene
 

There is nothing wrong with how Firefox or any other browser is working with the page.
To see all the uploads, do the following:
Find the button that says uploads. 
Turn browse mode off.
\Tab and shift tab to be sure you are on the button.
Press the space bar.
Down arrow to all videos and press enter.

Return to browse mode.
Move to the bottom of the page and below the last item, there is a next button.  Activate it with the space bar.
You will see more videos if there are more.  As far as I can tell, you will be able to see everything uploaded in that way by following the next button until you have moved to the earliest videos.

Gene

On 6/18/2022 11:46 PM, Ali Colak wrote:

Specific examples, in this case, are completely useless, regardless of
weather they are mandatory or optional. The behavior is consistant
over youtube pages. I will post a couple below however.
I also wanted to send the log in debug mode, but though I looked in
temp I couldn't find it there, as I had done before. If anyone can
tellme where to find it, or if clipping pasting the log after opening
log viewer in debug mode will due, I can send that as well.
https://www.youtube.com/channel/UCOmDqU1bEk_jHOsfP9aLWsw/videos

https://www.youtube.com/c/TarihObas%C4%B1/videos

https://www.youtube.com/c/Freecodecamp/videos


On 6/18/22, Brian Vogel <britechguy@...> wrote:
On Sat, Jun 18, 2022 at 06:51 PM, JM Casey wrote:

but I thought they were talking about the youtube display page,
-
I don't care what is being talked about.  Specific examples are NOT optional
when you want others to troubleshoot.  This is not news, or rocket science.

Those doing diagnostics all need to be on in this case literally the same
page.  I've seen people load mobile pages, by intent, on computers and the
behavior is very different for these.  No matter what it is, a single
example, and preferably several, should be provided when asking this kind of
question.  That's anywhere, not just on this group.
--

Brian - Windows 10, 64-Bit, Version 21H2, Build 19044

The real art of conversation is not only to say the right thing in the right
place but to leave unsaid the wrong thing at the tempting moment.

~ Dorothy Nevill










.


Re: Older videos do not load while brousing through channel in video on firefox

nvdainth@...
 

I use this trick
go to end of page which you found end of load video
then press NVDA+space to focus mode
and press down
the more video will load
then press NVDA+space to browse mode normally
repeat these step  when you want load more video or playlist in Youtube on Firefox


Re: Older videos do not load while brousing through channel in video on firefox

Gene
 

Even if the behavior is the same, it is still important to furnish at least one link.  You talked about a page with a lot of videos going back for years.  People aren't going to search for channels to find one that meets those requirements.  At least one relevant link is important to give. 

Gene

On 6/18/2022 11:46 PM, Ali Colak wrote:

Specific examples, in this case, are completely useless, regardless of
weather they are mandatory or optional. The behavior is consistant
over youtube pages. I will post a couple below however.
I also wanted to send the log in debug mode, but though I looked in
temp I couldn't find it there, as I had done before. If anyone can
tellme where to find it, or if clipping pasting the log after opening
log viewer in debug mode will due, I can send that as well.
https://www.youtube.com/channel/UCOmDqU1bEk_jHOsfP9aLWsw/videos

https://www.youtube.com/c/TarihObas%C4%B1/videos

https://www.youtube.com/c/Freecodecamp/videos


On 6/18/22, Brian Vogel <britechguy@...> wrote:
On Sat, Jun 18, 2022 at 06:51 PM, JM Casey wrote:

but I thought they were talking about the youtube display page,
-
I don't care what is being talked about.  Specific examples are NOT optional
when you want others to troubleshoot.  This is not news, or rocket science.

Those doing diagnostics all need to be on in this case literally the same
page.  I've seen people load mobile pages, by intent, on computers and the
behavior is very different for these.  No matter what it is, a single
example, and preferably several, should be provided when asking this kind of
question.  That's anywhere, not just on this group.
--

Brian - Windows 10, 64-Bit, Version 21H2, Build 19044

The real art of conversation is not only to say the right thing in the right
place but to leave unsaid the wrong thing at the tempting moment.

~ Dorothy Nevill










.


Re: Older videos do not load while brousing through channel in video on firefox

Ali Colak
 

In addition, I am using the latest updates of windows, firefox and
NVDA, though this problem has been going on for a while.

On 6/19/22, Ali Colak via groups.io <alish54@...> wrote:
Specific examples, in this case, are completely useless, regardless of
weather they are mandatory or optional. The behavior is consistant
over youtube pages. I will post a couple below however.
I also wanted to send the log in debug mode, but though I looked in
temp I couldn't find it there, as I had done before. If anyone can
tellme where to find it, or if clipping pasting the log after opening
log viewer in debug mode will due, I can send that as well.
https://www.youtube.com/channel/UCOmDqU1bEk_jHOsfP9aLWsw/videos

https://www.youtube.com/c/TarihObas%C4%B1/videos

https://www.youtube.com/c/Freecodecamp/videos


On 6/18/22, Brian Vogel <britechguy@...> wrote:
On Sat, Jun 18, 2022 at 06:51 PM, JM Casey wrote:


but I thought they were talking about the youtube display page,
-
I don't care what is being talked about. Specific examples are NOT
optional
when you want others to troubleshoot. This is not news, or rocket
science.

Those doing diagnostics all need to be on in this case literally the same
page. I've seen people load mobile pages, by intent, on computers and
the
behavior is very different for these. No matter what it is, a single
example, and preferably several, should be provided when asking this kind
of
question. That's anywhere, not just on this group.
--

Brian - Windows 10, 64-Bit, Version 21H2, Build 19044

The real art of conversation is not only to say the right thing in the
right
place but to leave unsaid the wrong thing at the tempting moment.

~ Dorothy Nevill










Re: Older videos do not load while brousing through channel in video on firefox

Ali Colak
 

Specific examples, in this case, are completely useless, regardless of
weather they are mandatory or optional. The behavior is consistant
over youtube pages. I will post a couple below however.
I also wanted to send the log in debug mode, but though I looked in
temp I couldn't find it there, as I had done before. If anyone can
tellme where to find it, or if clipping pasting the log after opening
log viewer in debug mode will due, I can send that as well.
https://www.youtube.com/channel/UCOmDqU1bEk_jHOsfP9aLWsw/videos

https://www.youtube.com/c/TarihObas%C4%B1/videos

https://www.youtube.com/c/Freecodecamp/videos

On 6/18/22, Brian Vogel <britechguy@...> wrote:
On Sat, Jun 18, 2022 at 06:51 PM, JM Casey wrote:


but I thought they were talking about the youtube display page,
-
I don't care what is being talked about. Specific examples are NOT optional
when you want others to troubleshoot. This is not news, or rocket science.

Those doing diagnostics all need to be on in this case literally the same
page. I've seen people load mobile pages, by intent, on computers and the
behavior is very different for these. No matter what it is, a single
example, and preferably several, should be provided when asking this kind of
question. That's anywhere, not just on this group.
--

Brian - Windows 10, 64-Bit, Version 21H2, Build 19044

The real art of conversation is not only to say the right thing in the right
place but to leave unsaid the wrong thing at the tempting moment.

~ Dorothy Nevill






Re: NVDA with Team Viewer.

Chris Tromborg
 

I have had exactly the same experience. 

 

Chris Tromborg, Ph.D.

Mountain Lion Foundation

Feline Conservation Foundation

Behavioral Enrichment for Captive Animals

Animal Communication, Behavior, & Cognition

Feline Conservation & Biology

1-530-753-2763 Home

1-530-902-2763 Cell

cattromborg@...

www.christromborg.com

 

  

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Ravindran V.S.
Sent: Saturday, June 18, 2022 8:45 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA with Team Viewer.

 

This is in my Windows 10 with H2 version.

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Ravindran V.S. via groups.io
Sent: Sunday, June 19, 2022 9:14 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA with Team Viewer.

 

Hi Group,

The latest NVDA Version 22.1 and Team Viewer latest versions does not provide any useful accessibility.

I am not too sure which has caused this problem. Because I have both latest versions running.

When I open Team Viewer NVDA does not speak anything. Earlier can move with Tab and get into the menu and other required cells.

But now nothing.

Even Object navigation does not provide much help.

 

Anything am I missing or doing wrong?

Team Viewer was fairly accessible with NVDA rather than Any-Desk. But now giving problem.

 

Kindly advice.

Thanks,

Ravi.


Re: NVDA with Team Viewer.

Ravindran V.S.
 

This is in my Windows 10 with H2 version.

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Ravindran V.S. via groups.io
Sent: Sunday, June 19, 2022 9:14 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA with Team Viewer.

 

Hi Group,

The latest NVDA Version 22.1 and Team Viewer latest versions does not provide any useful accessibility.

I am not too sure which has caused this problem. Because I have both latest versions running.

When I open Team Viewer NVDA does not speak anything. Earlier can move with Tab and get into the menu and other required cells.

But now nothing.

Even Object navigation does not provide much help.

 

Anything am I missing or doing wrong?

Team Viewer was fairly accessible with NVDA rather than Any-Desk. But now giving problem.

 

Kindly advice.

Thanks,

Ravi.


NVDA with Team Viewer.

Ravindran V.S.
 

Hi Group,

The latest NVDA Version 22.1 and Team Viewer latest versions does not provide any useful accessibility.

I am not too sure which has caused this problem. Because I have both latest versions running.

When I open Team Viewer NVDA does not speak anything. Earlier can move with Tab and get into the menu and other required cells.

But now nothing.

Even Object navigation does not provide much help.

Anything am I missing or doing wrong?

Team Viewer was fairly accessible with NVDA rather than Any-Desk. But now giving problem.

 

Kindly advice.

Thanks,

Ravi.


Re: NVDA issue with visual studio 2022 parameter help

Luke Davis
 

Luke Robinett wrote:

There is another issue, however. I will be typing a line of code and eventually NVDA will start saying “parameter help, parameter help, parameter help” over and over every time I move the cursor left or right or type a key. The only way to get it to stop doing this is to press escape and then arrow away from that line of code and back again. This is a problem because ironically, NVDA repeating “parameter help” is making it so I can’t hear the actual parameter help. Lol.
Does it help to turn off tooltips? (First checkbox in NVDA Object Presentation settings.)

Does it help to turn off "Report dynamic content changes"? (NVDA+5.)

Luke


Re: Older videos do not load while brousing through channel in video on firefox

JM Casey
 

It’s inconsistent behaviour. The script on the page has to interpret that youv’e done something “active” to make it scroll; sometimes just using browse mode/virtual buffer as you normally would does not do it. I tend to find that youtube works better with chrome than Firefox (and probably with other chromium-based browsers as well) in the sense that it’s not very responsive with firefox, so that is probablyw hy the OP thinks this problem only exists with firefox, at a guess.

 

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: June 18, 2022 07:04 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Older videos do not load while brousing through channel in video on firefox

 

on the pages I've used that scroll, I don't have to move the mouse pointer.  Simply moving down the page to the point where it should scroll will result in it scrolling.  If you move beyond that point such as by moving to the bottom of the page, the page won't scroll.

Gene

On 6/18/2022 5:51 PM, JM Casey wrote:

Not sure if I just inferred this and maybe it’s not the case, but I thought they were talking about the youtube display page, either for one’s personal recommendations ora  channel one clicks on to see their uploads.

I too have experienced this sort of thing (though it doesn’t matter what screen-reader or browser it is in my case), and yes, it’s usuallyb ecause the page is not scrolling as you navigate with the screen-reader. You have to actually do something actively witht eh page in order to make it scroll – such as moving the mouse pointer.

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian Vogel
Sent: June 18, 2022 06:48 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Older videos do not load while brousing through channel in video on firefox

 

I will say this, again:  These kinds of issues cannot be successfully discussed or solved in the abstract.

A single URL, two for good measure, of pages where this behavior exhibits itself would go a very long way in helping potential assistants to try to figure out what may be occurring.
--

Brian - Windows 10, 64-Bit, Version 21H2, Build 19044  

The real art of conversation is not only to say the right thing in the right place but to leave unsaid the wrong thing at the tempting moment.

        ~ Dorothy Nevill

 


Re: Older videos do not load while brousing through channel in video on firefox

Gene
 

on the pages I've used that scroll, I don't have to move the mouse pointer.  Simply moving down the page to the point where it should scroll will result in it scrolling.  If you move beyond that point such as by moving to the bottom of the page, the page won't scroll.

Gene

On 6/18/2022 5:51 PM, JM Casey wrote:

Not sure if I just inferred this and maybe it’s not the case, but I thought they were talking about the youtube display page, either for one’s personal recommendations ora  channel one clicks on to see their uploads.

I too have experienced this sort of thing (though it doesn’t matter what screen-reader or browser it is in my case), and yes, it’s usuallyb ecause the page is not scrolling as you navigate with the screen-reader. You have to actually do something actively witht eh page in order to make it scroll – such as moving the mouse pointer.

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Brian Vogel
Sent: June 18, 2022 06:48 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Older videos do not load while brousing through channel in video on firefox

 

I will say this, again:  These kinds of issues cannot be successfully discussed or solved in the abstract.

A single URL, two for good measure, of pages where this behavior exhibits itself would go a very long way in helping potential assistants to try to figure out what may be occurring.
--

Brian - Windows 10, 64-Bit, Version 21H2, Build 19044  

The real art of conversation is not only to say the right thing in the right place but to leave unsaid the wrong thing at the tempting moment.

        ~ Dorothy Nevill


4381 - 4400 of 100970