Date   

Re: Ask developers: Synth Driver: Async or Sync speakText

Tyler Spivey
 

Hi,
You can subscribe to nvda-devel here:
https://lists.sourceforge.net/lists/listinfo/nvda-devel
Or by sending mail to nvda-devel-request@lists.sourceforge.net with subscribe in the body.

speak (and thus speakText) must be async. When something calls speak (speakText is deprecated), send it off to a background thread.

For say all to work properly, you also have to handle indexes. An index is a marker that the screen reader sends to the synthesizer, and the synth sends back when it gets to that point in the output.

If you still need help, feel free to mail nvda-devel or mail me off-list. I've written a few of these.

On 10/16/2016 6:31 PM, Tuan Le Anh wrote:
Hi there.
My name is Tuan Le Anh. I am developing Vietnamese TTS for NVDA.
I just wanted to ask a question but don't have permission to post in
developer mail group.
So, I am sending to you with hope you will help me.
My problem is that I can't get speakText function to work properly.
If speakText is synchronized function, NVDA freezes while TTS reads some
text.
If speakText is async, Say All feature doesn't work properly: system
caret moves to end of text at once instead of moving along with reading
text, or system caret doesn't move and NVDA reads only few lines of text
(reads around 10 lines then stops).
Please, help me as blind people in Vietnam really need my portable
synthesizer.
Thank you and looking forward to your replying,
Tuan Le Anh.


Re: a new version of open office

 

your welcome.
its my pleasure and i am very glad to help others.

On 10/17/16, Rosemarie Chavarria <knitqueen2007@gmail.com> wrote:
This is very helpful. Thanks.


Rosemarie




On 10/16/2016 1:32 AM, nasrin khaksar wrote:
hi Rosemarie. since libreoffice does not support say all, i installed
balabolka, as well as sapi5 version of espeak and i convert my
documents to audio and listen to it.
another way, is you can in the file menu, select preview in web
browser which make a temporary copy of your documents and you can
press insert down to read your document entirely.
hope that helps and God bless you.

On 10/16/16, Gary Metzler <gmtravel@bellsouth.net> wrote:
Hi Rosemary,

Libreoffice is now up to version 5.2.

-----Original Message-----
From: Rosemarie Chavarria
Sent: Saturday, October 15, 2016 4:26 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] a new version of open office

Hi,


How do you get libre office to read a document? I'm just asking because
I'd like to be able to use NVDA down-arrow instead of always having to
press control down-arrow to read by paragraphs.


Rosemarie




On 10/15/2016 1:08 PM, nasrin khaksar wrote:
hi.
yes i recommend you to update.
because of security fixes, support of more secure components and also
security fixes in java.
i use libreoffice 4.4.6 and its realy great!
i did not test the newer version of openoffice until now.
God bless you and thanks.

On 10/13/16, Rosemarie Chavarria <knitqueen2007@gmail.com> wrote:
I haven't tried it on my new computer yet. I'm thinking about it
though.




On 10/12/2016 4:25 PM, Bobby wrote:
Hay I was just on the ninite web site and found out open office has
version 4.1.3. I was wondering if I should update to this version.
Can you please test and let me know because I have open office
version
4.1.2. Hope it works












--
we have not sent you but as a mercy to the creation.
holy quran, chapter 21, verse 107.
in the very authentic narration is:
imam hosein is the beacon of light and the ark of salvation.
best website for studying islamic book in different languages
al-islam.org


Ask developers: Synth Driver: Async or Sync speakText

Tuan Le Anh <tuanla1972@...>
 

Hi there.
My name is Tuan Le Anh. I am developing Vietnamese TTS for NVDA.
I just wanted to ask a question but don't have permission to post in developer mail group.
So, I am sending to you with hope you will help me.
My problem is that I can't get speakText function to work properly.
If speakText is synchronized function, NVDA freezes while TTS reads some text.
If speakText is async, Say All feature doesn't work properly: system caret moves to end of text at once instead of moving along with reading text, or system caret doesn't move and NVDA reads only few lines of text (reads around 10 lines then stops).
Please, help me as blind people in Vietnam really need my portable synthesizer.
Thank you and looking forward to your replying,
Tuan Le Anh.


I am needingsome help please

laura cornwell <cornwelll627@...>
 

I am using out look and I am needing to no I am using 3accountsin my office
program how do I put my contacts from my gmail stuff in to office?


Re: a new version of open office

Rosemarie Chavarria
 

This is very helpful. Thanks.


Rosemarie

On 10/16/2016 1:32 AM, nasrin khaksar wrote:
hi Rosemarie. since libreoffice does not support say all, i installed
balabolka, as well as sapi5 version of espeak and i convert my
documents to audio and listen to it.
another way, is you can in the file menu, select preview in web
browser which make a temporary copy of your documents and you can
press insert down to read your document entirely.
hope that helps and God bless you.

On 10/16/16, Gary Metzler <gmtravel@bellsouth.net> wrote:
Hi Rosemary,

Libreoffice is now up to version 5.2.

-----Original Message-----
From: Rosemarie Chavarria
Sent: Saturday, October 15, 2016 4:26 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] a new version of open office

Hi,


How do you get libre office to read a document? I'm just asking because
I'd like to be able to use NVDA down-arrow instead of always having to
press control down-arrow to read by paragraphs.


Rosemarie




On 10/15/2016 1:08 PM, nasrin khaksar wrote:
hi.
yes i recommend you to update.
because of security fixes, support of more secure components and also
security fixes in java.
i use libreoffice 4.4.6 and its realy great!
i did not test the newer version of openoffice until now.
God bless you and thanks.

On 10/13/16, Rosemarie Chavarria <knitqueen2007@gmail.com> wrote:
I haven't tried it on my new computer yet. I'm thinking about it though.




On 10/12/2016 4:25 PM, Bobby wrote:
Hay I was just on the ninite web site and found out open office has
version 4.1.3. I was wondering if I should update to this version.
Can you please test and let me know because I have open office version
4.1.2. Hope it works










Re: I am a old user with a new email address

Rosemarie Chavarria
 

Hi, Laura,


I think I remember you from the old NVDA list when it was on freelists.


Rosemarie

On 10/16/2016 1:36 PM, laura cornwell wrote:
Hi My name is laura Cornwell I am just using a different email address. I
have been a NVDA user for a long time now I would love to be able to help
someone on this list when I can. t



I am a old user with a new email address

laura cornwell <cornwelll627@...>
 

Hi My name is laura Cornwell I am just using a different email address. I
have been a NVDA user for a long time now I would love to be able to help
someone on this list when I can. t


Re: betting NVDA to stop saying blank when reading blank lines in A message

Gene
 

Are you reading messages by down arrowing line by line?  If so, why not use the read to end command.  You can then just listen to the message and you won't hear blank lines announced either. 
 
I don't know if there is a way to cause NVDA not to say blank when a blank line is encountered.  But read to end will eliminate the problem.
 
Gene

From: Casey
Sent: Sunday, October 16, 2016 2:28 PM
Subject: [nvda] betting NVDA to stop saying blank when reading blank lines in A message

Hi when I ma reading threw my e-mail and there is blank lines between
lines in what I am reading where do I go in NVDA to change it from
saying blank when it finds A blank line to say nothing when it finds A
blank line?
Or can you now change this in NVDA?


--
Casey



betting NVDA to stop saying blank when reading blank lines in A message

Casey <cwollner@...>
 

Hi when I ma reading threw my e-mail and there is blank lines between lines in what I am reading where do I go in NVDA to change it from saying blank when it finds A blank line to say nothing when it finds A blank line?
Or can you now change this in NVDA?


--
Casey


Re: NVDA & Slack?

Arthur BREUNEVAL
 

OK, thanks Robert for your clear response.


Arthur BREUNEVAL
Sent with Mozilla Thunderbird.
Le 14/10/2016 à 18:32, Robert Kingett a écrit :

Slack is not as accessile with NVDA on its own as it could be. They would need to enable IRC to make it fully accessile to you. Their desktop client cannot e used at all by NVDA


Re: Email atachments

Rui Fontes
 

After setting the message list to one line view it is not necessary to do
any other setting, since "Has attachment" will be announced In first plac.

Rui


-----Mensagem Original-----
De: Gene
Data: 16 de outubro de 2016 19:13
Para: nvda@nvda.groups.io
Assunto: Re: [nvda] Email atachments


Then you have to change another item before you can work with the columns.
I'm glad another list member brought that up since I wouldn't have known
about that aspect of the problem otherwise.

To change the setting, do the following:
Issue the command alt v then l then m.
You are in a list. Down arrow to oneline or to automatic and press enter.
Then follow the procedure I gave before and you can adjust the columns.

Gene

----- Original Message -----
From: Peter Beasley
Sent: Sunday, October 16, 2016 11:09 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Email atachments

It says colums unavailable.

From: Gene
Sent: Sunday, October 16, 2016 12:17 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Email atachments

Did you issue the command I gave and then down arrow? If so, you should see
an item that says select columns. If you having the view set to two line
view, you should still hear select columns but that it is unavailable. If
you are using automatic, which I believe is the default, you should be able
to open select coluns and then proceed. If you are using one line view, you
should also be able to select columns.
Try what I described again. That is:
Press alt then type v then v again then w.
Do not press enter after this.
Start down arrowing. Let us know the results.

Gene
----- Original Message -----
Gene

From: Peter Beasley
Sent: Sunday, October 16, 2016 3:54 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Email atachments

The ribbon version.

From: Gene
Sent: Saturday, October 15, 2016 9:28 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Email atachments

Are you using the menu version or the ribbon version? My instructions were
for the ribbon version.

Gene
----- Original Message -----
From: Peter Beasley
Sent: Saturday, October 15, 2016 12:43 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Email atachments

Can't find any reference to colums in the view menu.

From: Gene
Sent: Saturday, October 15, 2016 6:02 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Email atachments

Assuming you are using the ribbon version, issue the command alt v, then v
again, then w.
You are in a menu.
Down arrow to columns or something with similar wording.
Press eter.
Up and down arrow to see the different columns. I didn't play with this but
once you get to attachments, if you tab, you should see a move up and a move
down button. Active whichever button you want with the space bar as many
times as you want.
I believe there is an ok button you tab to and activate after making
whatever changes you want.
I didn't check.

Gene
----- Original Message -----
From: Peter Beasley
Sent: Saturday, October 15, 2016 10:07 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Email atachments

How do you do that?

From: Gene
Sent: Saturday, October 15, 2016 1:42 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Email atachments

If you change the order of the fields, that should determine what is read in
which order. Personally, I have no objection to having NVDA saying
attachment first by default, I don't have a preference but my point is that
you should be able to already determine the order within the program.

From: Peter Beasley
Sent: Saturday, October 15, 2016 6:19 AM
To: nvda@nvda.groups.io
Subject: [nvda] Email atachments

I use Windows live mail and it would be nice if NVDA could say has
attachment before the subject like outlook express rather than after.


Re: Getting NVDA to announce braces when reading back code

Jacob Kruger
 

<smile>


Glad you found a solution.


Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

On 2016-10-16 4:35 PM, Sharni-Lee Ward wrote:
When you mentioned Speech Dictionary values, I remembered I'd done
something involving braces and the pronunciation dictionary that meant
they were treated like quotes, because back then I didn't want to code
anything and I was reading a fanfic where braces were used to denote
animal speech. No wonder it hasn't seemed to be working!


On 16/10/2016 6:34 PM, Jacob Kruger wrote:
Try setting punctuation level to all, or, honestly, for when I work
with php start and end tags, among a couple of others, I have added in
dictionary entries for those punctuation symbol combinations to make
it speak out values no matter which symbol level I have been working
with.


Stay well


Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

On 2016-10-16 7:24 AM, Sharni-Lee Ward wrote:
Hi,


I'm learning how to program games and in the script I'm using, blocks of
code are marked with braces. I tried changing their symbol level to some
or none but it still didn't announce them. It's been long enough since I
did this that I've forgotten how I previously made it stick. What am I
doing wrong?





Re: Email atachments

Gene
 

Then you have to change another item before you can work with the columns.  I'm glad another list member brought that up since I wouldn't have known about that aspect of the problem otherwise. 
 
To change the setting, do the following:
Issue the command alt v then l then m.
You are in a list.  Down arrow to oneline or to automatic and press enter.
Then follow the procedure I gave before and you can adjust the columns.
 
Gene

----- Original Message -----
Sent: Sunday, October 16, 2016 11:09 AM
Subject: Re: [nvda] Email atachments

It says colums unavailable.
 
From: Gene
Sent: Sunday, October 16, 2016 12:17 PM
Subject: Re: [nvda] Email atachments
 
Did you issue the command I gave and then down arrow?  If so, you should see an item that says select columns.  If you having the view set to two line view, you should still hear select columns but that it is unavailable.  If you are using automatic, which I believe is the default, you should be able to open select coluns and then proceed.  If you are using one line view, you should also be able to select columns. 
Try what I described again.  That is:
Press alt then type v then v again then w.
Do not press enter after this.
Start down arrowing.  Let us know the results. 
 
Gene
----- Original Message -----
Gene
 
Sent: Sunday, October 16, 2016 3:54 AM
Subject: Re: [nvda] Email atachments
 
The ribbon version.
 
From: Gene
Sent: Saturday, October 15, 2016 9:28 PM
Subject: Re: [nvda] Email atachments
 
Are you using the menu version or the ribbon version?  My instructions were for the ribbon version.
 
Gene
----- Original Message -----
Sent: Saturday, October 15, 2016 12:43 PM
Subject: Re: [nvda] Email atachments
 
Can’t find any reference to colums in the view menu.
 
From: Gene
Sent: Saturday, October 15, 2016 6:02 PM
Subject: Re: [nvda] Email atachments
 
Assuming you are using the ribbon version, issue the command alt v, then v again, then w.
You are in a menu. 
Down arrow to columns or something with similar wording. 
Press eter.
Up and down arrow to see the different columns.  I didn't play with this but once you get to attachments, if you tab, you should see a move up and a move down button.  Active whichever button you want with the space bar as many times as you want. 
I believe there is an ok button you tab to and activate after making whatever changes you want.
I didn't check. 
 
Gene
----- Original Message -----
Sent: Saturday, October 15, 2016 10:07 AM
Subject: Re: [nvda] Email atachments
 
How do you do that?
 
From: Gene
Sent: Saturday, October 15, 2016 1:42 PM
Subject: Re: [nvda] Email atachments
 
If you change the order of the fields, that should determine what is read in which order.  Personally, I have no objection to having NVDA saying attachment first by default, I don't have a preference but my point is that you should be able to already determine the order within the program. 

Sent: Saturday, October 15, 2016 6:19 AM
Subject: [nvda] Email atachments
 
I use Windows live mail and it would be nice if NVDA could say has attachment before the subject like outlook express rather than after.


Re: nvda and braille

Rui Fontes
 

No, you can't import a new Braille table from Jaws or Window-Eyes, since the
format is different.

In wich language you work?

Rui


-----Mensagem Original-----
De: Anouk Radix
Data: 16 de outubro de 2016 12:43
Para: nvda@nvda.groups.io
Assunto: [nvda] nvda and braille



Hi everyone,

I recently switched from mac os x to windows 10.

I use both nvda and windoweyes. I like nvda a lot because its really fast
with braille and speech and because it works well out of the box with many
programs.

I am mainly a braille user though and do miss the ability to use my thumb
keys to scroll throughout a programs screen. Furthermore I was wondering if
there are any complete braille tables for nvda? The ones I get contain a lot
of garbage between text and nos just one or two characters but a lot of it.
Is it perhaps possible to import a braille table from another screenreader
because I don't get this anywhere else?

Thanks in advance for any info,

Greetings, Anouk,


Re: Email atachments

Rui Fontes
 

Have you read my message below?

De: "Rui Fontes" <rui.fontes@tiflotecnia.com>
Para: <nvda@nvda.groups.io>
Assunto: Re: [nvda] Email atachments
Data: 15 de outubro de 2016 19:40

In the view ribbon 8 tabs and you will land in something like Scheme,
message list.
Press spacebar and then look for one line view.
Press Enter and you are fine with what you want...

Rui


-----Mensagem Original-----
De: Peter Beasley
Data: 15 de outubro de 2016 18:43
Para: nvda@nvda.groups.io
Assunto: Re: [nvda] Email atachments


Can't find any reference to colums in the view menu.

From: Gene
Sent: Saturday, October 15, 2016 6:02 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Email atachments

Assuming you are using the ribbon version, issue the command alt v, then v
again, then w.
You are in a menu.
Down arrow to columns or something with similar wording.
Press eter.
Up and down arrow to see the different columns. I didn't play with this but
once you get to attachments, if you tab, you should see a move up and a move
down button. Active whichever button you want with the space bar as many
times as you want.
I believe there is an ok button you tab to and activate after making
whatever changes you want.
I didn't check.

Gene
----- Original Message -----
From: Peter Beasley
Sent: Saturday, October 15, 2016 10:07 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Email atachments

How do you do that?

From: Gene
Sent: Saturday, October 15, 2016 1:42 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Email atachments

If you change the order of the fields, that should determine what is read in
which order. Personally, I have no objection to having NVDA saying
attachment first by default, I don't have a preference but my point is that
you should be able to already determine the order within the program.

From: Peter Beasley
Sent: Saturday, October 15, 2016 6:19 AM
To: nvda@nvda.groups.io
Subject: [nvda] Email atachments

I use Windows live mail and it would be nice if NVDA could say has
attachment before the subject like outlook express rather than after.


Re: Help with tap and Radio

Rémy Ruiz
 

Hi,

Press F12

to display search box

then:

Ctrl+e search box

Ctrl+d search menu

Cheers.

Rémy


Le 16/10/2016 à 13:50, Brian's Mail list account a écrit :
This sender seems to have no name when I read the inbox list.
anyone?
Brian

bglists@...
Sent via blueyonder.
Please address personal email to:-
briang1@..., putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Георги Ламбов" <obichamlegiona@...>
To: <nvda@nvda.groups.io>
Sent: Saturday, October 15, 2016 7:12 PM
Subject: Re: [nvda] Help with tap and Radio


   Hi!

By the way I was almost sure, that the speech goes about tapin radio but thought anyway that there's another program called: tab and radio, which I don't know about.

Georgi


На 15.10.2016 г. в 20:14 ч., David Goldfield написа:
The first thing I should mention about Tapinradio is that pressing f1
brings up a list of shortcut keys.

The quickest way to search for a station is to press ctrl+E.

Enter a call sign or a name.

At this point, pressing ctrl+Q moves into the list of possible search
results.

Press enter to play a station in the list.

ctrl+s stops the audio.

Ctrl+p will play it.

        David Goldfield,
Assistive Technology Specialist

Feel free to visit my Web site
WWW.DavidGoldfield.Info

On 10/15/2016 10:01 AM, brennenkinch@... wrote:
Hi I am new to tap and Radio and I am trying to figure out how to use it with NVDA i can't seem to be able to find and play a station any help either on or off list would be appritiated thanks

Sent from my iPhone















Re: Accessible ERP Systems?

Arlene
 

I agree. If they want you working for them. Then they should fork out the money to get you Jaws.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Brian's Mail list account
Sent: October-16-16 4:59 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Accessible ERP Systems?

They should buy you a copy of Jaws then if that is their attitude.
Otherwise I don't see their issue. If they don't know how to set up an account with the right level of privileges for you that is I would have thought a fairly easy thing to solve. IE ask somebody who has already done it!

Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal email to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message -----
From: "Pranav Lal" <pranav.lal@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Sunday, October 16, 2016 3:39 AM
Subject: Re: [nvda] Accessible ERP Systems?


Hi,



My employer uses SAP. They do have an accessibility setting for their web
clients. However, my employer’s administration team have been unable to find
the right role to assign to my id so no go.



I can still use the interface with NVDA but it is difficult to use because
of the way they have used java script. There is a windows based client that
has scripts for jaws. I have not used that.



Pranav


Re: Email atachments

Peter Beasley
 

It says colums unavailable.
 

From: Gene
Sent: Sunday, October 16, 2016 12:17 PM
Subject: Re: [nvda] Email atachments
 
Did you issue the command I gave and then down arrow?  If so, you should see an item that says select columns.  If you having the view set to two line view, you should still hear select columns but that it is unavailable.  If you are using automatic, which I believe is the default, you should be able to open select coluns and then proceed.  If you are using one line view, you should also be able to select columns. 
Try what I described again.  That is:
Press alt then type v then v again then w.
Do not press enter after this.
Start down arrowing.  Let us know the results. 
 
Gene
----- Original Message -----
Gene
 
Sent: Sunday, October 16, 2016 3:54 AM
Subject: Re: [nvda] Email atachments
 
The ribbon version.
 
From: Gene
Sent: Saturday, October 15, 2016 9:28 PM
Subject: Re: [nvda] Email atachments
 
Are you using the menu version or the ribbon version?  My instructions were for the ribbon version.
 
Gene
----- Original Message -----
Sent: Saturday, October 15, 2016 12:43 PM
Subject: Re: [nvda] Email atachments
 
Can’t find any reference to colums in the view menu.
 
From: Gene
Sent: Saturday, October 15, 2016 6:02 PM
Subject: Re: [nvda] Email atachments
 
Assuming you are using the ribbon version, issue the command alt v, then v again, then w.
You are in a menu. 
Down arrow to columns or something with similar wording. 
Press eter.
Up and down arrow to see the different columns.  I didn't play with this but once you get to attachments, if you tab, you should see a move up and a move down button.  Active whichever button you want with the space bar as many times as you want. 
I believe there is an ok button you tab to and activate after making whatever changes you want.
I didn't check. 
 
Gene
----- Original Message -----
Sent: Saturday, October 15, 2016 10:07 AM
Subject: Re: [nvda] Email atachments
 
How do you do that?
 
From: Gene
Sent: Saturday, October 15, 2016 1:42 PM
Subject: Re: [nvda] Email atachments
 
If you change the order of the fields, that should determine what is read in which order.  Personally, I have no objection to having NVDA saying attachment first by default, I don't have a preference but my point is that you should be able to already determine the order within the program. 

Sent: Saturday, October 15, 2016 6:19 AM
Subject: [nvda] Email atachments
 
I use Windows live mail and it would be nice if NVDA could say has attachment before the subject like outlook express rather than after.


Re: Getting NVDA to announce braces when reading back code

Sharni-Lee Ward
 

When you mentioned Speech Dictionary values, I remembered I'd done
something involving braces and the pronunciation dictionary that meant
they were treated like quotes, because back then I didn't want to code
anything and I was reading a fanfic where braces were used to denote
animal speech. No wonder it hasn't seemed to be working!

On 16/10/2016 6:34 PM, Jacob Kruger wrote:
Try setting punctuation level to all, or, honestly, for when I work
with php start and end tags, among a couple of others, I have added in
dictionary entries for those punctuation symbol combinations to make
it speak out values no matter which symbol level I have been working
with.


Stay well


Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

On 2016-10-16 7:24 AM, Sharni-Lee Ward wrote:
Hi,


I'm learning how to program games and in the script I'm using, blocks of
code are marked with braces. I tried changing their symbol level to some
or none but it still didn't announce them. It's been long enough since I
did this that I've forgotten how I previously made it stick. What am I
doing wrong?






Re: how to get NVDA to stop reading bollon pop ups when they come up on your system

Jacob Kruger
 

I'm half guessing that what you're talking about are the help balloons - invoke NVDA menu, open the preferences submenu, arrow down to object presentation, and hit enter, and the second checkbox on that dialogue is the checkbox for announcing/reporting help balloons - if it's turned on, you can try turning it off, tab back to ok button, and hit space bar to activate it, and see if that then makes a difference.


stay well


Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

On 2016-10-16 3:59 PM, Casey wrote:
Hi I would like to know is there A way to be NVDA to stop reading the bollon pop ups that come up on your machine?
Lie to tell you when A printer is not in use or available or things like that?
If you can change this how do you go about doing that?