1. nvda@nvda.groups.io
  2. Messages
   Date   
Re: editing m3u playlist with NVDA

Hope Williamson <hopeisjoyful@...>
 

I do this in Foobar. Although I put the playlist in random order every time lol.

Re: Indicating header cells in Excel worksheet outside of NVDA

James Scholes
 

Thanks so much, Brian! Works a treat.

Regards,

James Scholes

On 14/10/2019 at 2:00 pm, Brian Vogel wrote:
Yes, it is.  I wrote what follows for a student using JAWS, but it's screen reader agnostic.
-------------------------------------------------------------
*/Assigning a Title Row (Column Titles) and/or Title Column (Row Titles) in Excel/*
You can assign column and row titles in Excel. These are nice because they always work with Excel and are saved to the workbook. There's no risk of losing a setting in your screen reader.
To add column and row title names:
1. You will need to have selected one of the three following
things, depending on what you are trying to assign:
1. If you have a cell where the Column and Row titles
intersect, gain focus on it.  You will continue through the
process, assigning a name that begins with /Title/, which is
how Excel knows this is the intersection point.
2. The first column to the right of the intersection point that
marks the start of the series of cells that make up the
individual column titles across a given row.  You will
continue through the process, assigning a name that begins
with /RowTitle/, as this tells Excel these cells are a row
of titles for the columns that lie below them.
3. The first row beneath the intersection point that marks the
start of the series of cells that make up the individual row
titles down a given column.  You will continue through the
process, assigning a name that begins with /ColumnTitle/, as
this tells Excel these cells are a column of titles for the
rows to the right of them.
2. Open the Name dialog:
                                                               i.      Open the Formula ribbon (ALT-M)
                                                             ii.      Activate the “Define Name” command (M)
                                                           iii.      Within the drop-down list, activate “Define Name”
                                                           iv.      The “New Name” dialog opens
Focus is placed in the name field. Within the name field, you can name the focused cell or selected range of cells. In this case, we’re naming the column or row title:
1. Prefix the cell name using the following rules
                           i.  Start the range name with the label that tells Excel you’re creating a title range
1. Title – This tells Excel the column and row that
intersect at the active cell are a title row and column
2. ColumnTitle – This tells Excel the focused column
contains the titles for the rows within the range
3. RowTitle – this tells Excel the focused row contains
titles for the columns in the range
                            ii.      Add a name for the range.  I stick on an underscore then either the name of the workbook if I intend to make the name assignment applicable across the workbook and not usable anywhere else (see step iii, scope) or just leave it without anything else if I want to use it on other worksheets in the workbook.
1. Title_WidgetSales  or just Title
2. ColumnTitle_WidgetSales or just ColumnTitle
3. RowTitle_WidgetSales or just RowTitle
                              iii.      Optional - Add the last cell in the range preceded by two periods
1. Use this when you have multiple regions in a worksheet
2. Title_WidgetSales or just Title (there is no range for
the intersection)
3. ColumnTitle_WidgetSales..h32 or ColumnTitle..h32
4. RowTitle_WidgetSales..r12 or RowTitle..r12
5. Remember the cell address referenced is the last cell in
the range for which you are creating titles
The next field in the dialog sets the scope for the name. this is a combo box. Use UP and DOWN ARROW to choose from between:
* Workbook - the title Is unique and can’t be used elsewhere in a workbook
* A Specific Worksheet - the name can be used elsewhere in a workbook
You can add a comment for the named cell or region, this is strictly for your personal reference and doesn’t affect the echo of the column or row title name
The last field references the cell name or range of selected cells you’re naming. You can leave this field alone.
Activate the OK button to save the name and close the dialog.
Save the workbook and the titles are permanently saved and will work on any computer.
If you have titles set to echo in JAWS, the titles will echo and you won’t lose the settings.
--
Brian *-*Windows 10 Pro, 64-Bit, Version 1903, Build 18362
*The color of truth is grey.*
           ~ André Gide
Re: Indicating header cells in Excel worksheet outside of NVDA

Brian Vogel
 

Yes, it is.  I wrote what follows for a student using JAWS, but it's screen reader agnostic.
-------------------------------------------------------------

Assigning a Title Row (Column Titles) and/or Title Column (Row Titles) in Excel

You can assign column and row titles in Excel. These are nice because they always work with Excel and are saved to the workbook. There's no risk of losing a setting in your screen reader.

To add column and row title names:

    1. You will need to have selected one of the three following things, depending on what you are trying to assign:
      1. If you have a cell where the Column and Row titles intersect, gain focus on it.  You will continue through the process, assigning a name that begins with Title, which is how Excel knows this is the intersection point.
      2. The first column to the right of the intersection point that marks the start of the series of cells that make up the individual column titles across a given row.  You will continue through the process, assigning a name that begins with RowTitle, as this tells Excel these cells are a row of titles for the columns that lie below them.
      3. The first row beneath the intersection point that marks the start of the series of cells that make up the individual row titles down a given column.  You will continue through the process, assigning a name that begins with ColumnTitle, as this tells Excel these cells are a column of titles for the rows to the right of them.
    2. Open the Name dialog:

                                                               i.      Open the Formula ribbon (ALT-M)

                                                             ii.      Activate the “Define Name” command (M)

                                                           iii.      Within the drop-down list, activate “Define Name”

                                                           iv.      The “New Name” dialog opens

 

Focus is placed in the name field. Within the name field, you can name the focused cell or selected range of cells. In this case, we’re naming the column or row title:

    1. Prefix the cell name using the following rules

                           i.  Start the range name with the label that tells Excel you’re creating a title range

        1. Title – This tells Excel the column and row that intersect at the active cell are a title row and column
        2. ColumnTitle – This tells Excel the focused column contains the titles for the rows within the range
        3. RowTitle – this tells Excel the focused row contains titles for the columns in the range

                            ii.      Add a name for the range.  I stick on an underscore then either the name of the workbook if I intend to make the name assignment applicable across the workbook and not usable anywhere else (see step iii, scope) or just leave it without anything else if I want to use it on other worksheets in the workbook.

        1. Title_WidgetSales  or just Title
        2. ColumnTitle_WidgetSales or just ColumnTitle
        3. RowTitle_WidgetSales or just RowTitle

                              iii.      Optional - Add the last cell in the range preceded by two periods

        1. Use this when you have multiple regions in a worksheet
        2. Title_WidgetSales or just Title (there is no range for the intersection)
        3. ColumnTitle_WidgetSales..h32 or ColumnTitle..h32
        4. RowTitle_WidgetSales..r12 or RowTitle..r12
        5. Remember the cell address referenced is the last cell in the range for which you are creating titles

The next field in the dialog sets the scope for the name. this is a combo box. Use UP and DOWN ARROW to choose from between:

  • Workbook - the title Is unique and can’t be used elsewhere in a workbook
  • A Specific Worksheet - the name can be used elsewhere in a workbook

You can add a comment for the named cell or region, this is strictly for your personal reference and doesn’t affect the echo of the column or row title name

The last field references the cell name or range of selected cells you’re naming. You can leave this field alone.

Activate the OK button to save the name and close the dialog.

Save the workbook and the titles are permanently saved and will work on any computer.

If you have titles set to echo in JAWS, the titles will echo and you won’t lose the settings.

 

--

Brian - Windows 10 Pro, 64-Bit, Version 1903, Build 18362  

The color of truth is grey.

           ~ André Gide

 

 
Indicating header cells in Excel worksheet outside of NVDA

James Scholes
 

Hello all,

Quick question re: indicating the row or column header cells within an Excel worksheet. When using NVDA+Shift+R or NVDA+Shift+C, the information is stored in define name ranges, and can then be picked up by JAWS and possibly other screen readers. Is there a way for these ranges to be defined manually within Excel (or via a macro), by somebody not operating a screen reader at all?

Regards,

James Scholes

Re: NVDA and CCleaner

Felix G.
 

Hi,
I contacted them repeatedly but frankly they don't seem to care so I
have given up. Thanks for pointing out the ini file trick, that helps!
Best,
Felix

Am Fr., 11. Okt. 2019 um 16:01 Uhr schrieb Shaun Everiss <sm.everiss@...>:


CCleaner interface is not accessible.

There is a way round that, use the portable version.

The settings for everything can be toggled in the ini file.

If you find something which doesn't exist, hit space once and it will appear in the ini file.

Most settings can bee toggled from 1 to 0.

0 is unticked, 1 is ticked.

They are aware of this, but the ini file for most of it can be edited quite easily.

The installer is riddled with avast malware anyway, and the portable allows you to do everything, including disabling uac for ccleaner, and extra things.

You can even create the run and open from recycle bin.

You don't get the program group or have it start by default but you can do that to.

My only gripe is that you can not turn quick clean off in settings and in fact once a day easy clean and software updater will be toggled on so I have to edit the ini file daily and change a few lines but thats about it.



On 12/10/2019 11:25 am, Ján Kulik wrote:

Hi all,


Are you using CCleaner with NVDA? I found that when selecting an item in CCleaner, NVDA does not report check boxes. This is quite annoying, because I think it could be done so that NVDA announces check boxes in CCleaner.
It might be a good idea to contact the developer who is in charge, some users are reporting problems.
Re: How do I set up a keyboard short cut to start NVDA?

Robert Doc Wright godfearer
 

What is in the shortcut field? If it is blank you can create one. If this is still not working I have one possible solution.

 

******If we can't look at ourselves, and ask, why?  then where does the learning start?***     

 

From: Hermann-Josef Kurzen
Sent: Monday, October 14, 2019 3:29 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How do I set up a keyboard short cut to start NVDA?

 

Hi,

 

yes, the first two items look described by You.

 

 

Greetings - Hermann

 

 

 

--- Ursprüngliche Nachricht ---

> Von:         "Robert Doc Wright godfearer" <godfearer@...>  Wichtigkeit Normal

> Lesebestätigung wurde nicht angefordert

> Gesendet am: 14.10.2019 11:20:38

> An:          "nvda@nvda.groups.io" <nvda@nvda.groups.io>;

> CC:

> Betreff:     Re: [nvda] How do I set up a keyboard short cut to start NVDA?

> Verwendetes Mailprogramm: vermutlich online im WEB erstellt

>

> Herman, when you go to the NVDA icon on your desktop press alt+enter and tell me  if your first two dialog boxes look like this:

>

> Target

> "C:\Program Files (x86)\NVDA\nvda_slave.exe" launchNVDA -r

>

>

> Application location

> C:\Program Files (x86)\NVDA

>

>

>

>

> ******If we can't look at ourselves, and ask, why?  then where does the learning start?***     

>

> From: Hermann-Josef Kurzen

> Sent: Sunday, October 13, 2019 9:02 AM

> To: nvda@nvda.groups.io

> Subject: Re: [nvda] How do I set up a keyboard short cut to start NVDA?

>

> Hi,

>

> as we are talking about alt+control+n to start NVDA:

> I'm using the latest Version of NVDA in connection with Windows 10.

> The hotkey alt+control+n is active so I'm told by Windows.

> But it doesn't work.

> Is it recommended to run NVDA as an administrator to correct this?

>

> 

> Greetings - Hermann

>

>

>

> --- Ursprüngliche Nachricht ---

> > Von:         "Robert Doc Wright godfearer" <godfearer@...>  Wichtigkeit Normal

> > Lesebestätigung wurde nicht angefordert

> > Gesendet am: 13.10.2019 15:40:54

> > An:          "nvda@nvda.groups.io" <nvda@nvda.groups.io>;

> > CC:

> > Betreff:     Re: [nvda] How do I set up a keyboard short cut to start NVDA?

> > Verwendetes Mailprogramm: vermutlich online im WEB erstellt

> >

> > The shortcut is normally defaulted at alt+control+n  You can go into general settings and set it to start with windows. I have never had to create a shortcut for it.

> >

> > ******If we can't look at ourselves, and ask, why?Ã,  then where does the learning start?***Ã, Ã, Ã, Ã, Ã, 

> >

> > From: James Bentley

> > Sent: Sunday, October 13, 2019 6:45 AM

> > To: NVDA

> > Subject: [nvda] How do I set up a keyboard short cut to start NVDA?

> >

> > Hi,

> > Ã, 

> > Can I do this inside of NVDA or do I do this in Windows?

> > Ã, 

> > Thank you,

> > Ã, 

> > James B

> > Ã, 

> > Ã, 

> >

> >

> >

> >

> >

> >

>

>

>

>

>

>

>

>

>

 

 

 

 
Re: How do I set up a keyboard short cut to start NVDA?

Hermann-Josef Kurzen
 

Hi,

yes, the first two items look described by You.


Greetings - Hermann



--- Ursprüngliche Nachricht ---

Von: "Robert Doc Wright godfearer" <godfearer@...> Wichtigkeit Normal
Lesebestätigung wurde nicht angefordert
Gesendet am: 14.10.2019 11:20:38
An: "nvda@nvda.groups.io" <nvda@nvda.groups.io>;
CC:
Betreff: Re: [nvda] How do I set up a keyboard short cut to start NVDA?
Verwendetes Mailprogramm: vermutlich online im WEB erstellt

Herman, when you go to the NVDA icon on your desktop press alt+enter and tell me if your first two dialog boxes look like this:

Target
"C:\Program Files (x86)\NVDA\nvda_slave.exe" launchNVDA -r


Application location
C:\Program Files (x86)\NVDA




******If we can't look at ourselves, and ask, why?  then where does the learning start?***     

From: Hermann-Josef Kurzen
Sent: Sunday, October 13, 2019 9:02 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How do I set up a keyboard short cut to start NVDA?

Hi,

as we are talking about alt+control+n to start NVDA:
I'm using the latest Version of NVDA in connection with Windows 10.
The hotkey alt+control+n is active so I'm told by Windows.
But it doesn't work.
Is it recommended to run NVDA as an administrator to correct this?


Greetings - Hermann



--- Ursprüngliche Nachricht ---
Von: "Robert Doc Wright godfearer" <godfearer@...> Wichtigkeit Normal
Lesebestätigung wurde nicht angefordert
Gesendet am: 13.10.2019 15:40:54
An: "nvda@nvda.groups.io" <nvda@nvda.groups.io>;
CC:
Betreff: Re: [nvda] How do I set up a keyboard short cut to start NVDA?
Verwendetes Mailprogramm: vermutlich online im WEB erstellt

The shortcut is normally defaulted at alt+control+n You can go into general settings and set it to start with windows. I have never had to create a shortcut for it.

******If we can't look at ourselves, and ask, why?Ã,  then where does the learning start?***Ã, Ã, Ã, Ã, Ã, 

From: James Bentley
Sent: Sunday, October 13, 2019 6:45 AM
To: NVDA
Subject: [nvda] How do I set up a keyboard short cut to start NVDA?

Hi,
Ã, 
Can I do this inside of NVDA or do I do this in Windows?
Ã, 
Thank you,
Ã, 
James B
Ã, 
Ã, 
Re: editing m3u playlist with NVDA

Robert Doc Wright godfearer
 

You can use notepad to edit.

 

******If we can't look at ourselves, and ask, why?  then where does the learning start?***     

 

From: Josh Kennedy
Sent: Sunday, October 13, 2019 9:13 PM
To: nvda@groups.io
Subject: [nvda] editing m3u playlist with NVDA

 

Hi,

 

What is the best way to edit an m3u playlisgt with NVDA? I selected a folder full of files, saved as m3u playlist in vlc media player and most files are out of the order they should be played in.

 

Josh

 

 

Sent from Mail for Windows 10

 

 
Re: How do I set up a keyboard short cut to start NVDA?

Robert Doc Wright godfearer
 

Herman, when you go to the NVDA icon on your desktop press alt+enter and tell me  if your first two dialog boxes look like this:

 

Target

"C:\Program Files (x86)\NVDA\nvda_slave.exe" launchNVDA -r

 

 

Application location

C:\Program Files (x86)\NVDA

 

 

 

 

******If we can't look at ourselves, and ask, why?  then where does the learning start?***     

 

From: Hermann-Josef Kurzen
Sent: Sunday, October 13, 2019 9:02 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How do I set up a keyboard short cut to start NVDA?

 

Hi,

 

as we are talking about alt+control+n to start NVDA:

I'm using the latest Version of NVDA in connection with Windows 10.

The hotkey alt+control+n is active so I'm told by Windows.

But it doesn't work.

Is it recommended to run NVDA as an administrator to correct this?

 

Greetings - Hermann

 

 

 

--- Ursprüngliche Nachricht ---

> Von:         "Robert Doc Wright godfearer" <godfearer@...>  Wichtigkeit Normal

> Lesebestätigung wurde nicht angefordert

> Gesendet am: 13.10.2019 15:40:54

> An:          "nvda@nvda.groups.io" <nvda@nvda.groups.io>;

> CC:

> Betreff:     Re: [nvda] How do I set up a keyboard short cut to start NVDA?

> Verwendetes Mailprogramm: vermutlich online im WEB erstellt

>

> The shortcut is normally defaulted at alt+control+n  You can go into general settings and set it to start with windows. I have never had to create a shortcut for it.

>

> ******If we can't look at ourselves, and ask, why?  then where does the learning start?***     

>

> From: James Bentley

> Sent: Sunday, October 13, 2019 6:45 AM

> To: NVDA

> Subject: [nvda] How do I set up a keyboard short cut to start NVDA?

>

> Hi,

>  

> Can I do this inside of NVDA or do I do this in Windows?

>  

> Thank you,

>  

> James B

>  

>  

>

>

>

>

>

>

 

 

 

 
Re: How do I set up a keyboard short cut to start NVDA?

Bianka Brankovic <bianka.brankovic@...>
 

Hello Hermann,

-----Ursprüngliche Nachricht-----
Von: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] Im Auftrag von Hermann-Josef Kurzen

as we are talking about alt+control+n to start NVDA:
I'm using the latest Version of NVDA in connection with Windows 10.
The hotkey alt+control+n is active so I'm told by Windows.
But it doesn't work.
Is it recommended to run NVDA as an administrator to correct this?

I had a similar issue last week when I tried to update NVDA fromm my normal user account. In my case NVDA froze when windows asked me for my admin password and I had to ask a co-worker to help me to log in and reinstall NVDA from my administrator account.

Now, it starts again automatically at login and the shortcut works in both the admin and the user account.

My suggestion for you would be to reinstall NVDA from your admin account.

Kind regards,

Bianka Brankovic

NVDA\s touch gestures

hurrikennyandopo ...
 

Hi guys


I am not a touch screen user with NVDA but wanted to know what gestures there were for NVDA from the user manual. I think I got them all.


I was curious as well does the add on for touch gestures for nvda have more gestures there? or let you do more with touch with NVDA.


Below is a list of what I came across in the user manual while wasting some time.

Those who use touch might help if not written down all ready.


NVDA touch gestures

*Toggle touch modes

To toggle touch modes, perform a 3-finger tap.
*Stop speech
Stop speech 2-finger tap Instantly stops speaking

*NVDA menu

NVDA menu 2-finger double tap
Pops up the NVDA menu to allow you to access preferences, tools, help, etc.

*Review modes

Switch to next review mode 2-finger flick up
switches to the next available review mode

Switch to previous review mode 2-finger flick down
switches to the previous available review mode
*Object navigation

Move to containing object flick up (object mode)Moves to the object containing the current navigator object
 
move to previous object flick left (object mode)
Moves to the object before the current navigator object

move to next object flick right (object mode)
Moves to the object after the current navigator object

Move to first contained object flick down (object mode)
Moves to the first object contained by the current navigator object

*Activate current navigator object
double tap Activates the current navigator object (similar to clicking with the mouse or pressing space when it has the system focus)

*Reviewing text
 
Move to previous line in review flick up (text mode)
Moves the review cursor to the previous line of text

Move to next line in review flick down (text mode)
Move the review cursor to the next line of text

Move to previous word in review 2-finger flick left (text mode)
Moves the review cursor to the previous word in the text

Move to next word in review 2-finger flick right (text mode)
Move the review cursor to the next word in the text

Move to previous character in review flick left (text mode)
Moves the review cursor to the previous character on the current line in the text

Move to next character in review flick right (text mode)
Move the review cursor to the next character on the current line of text

Say all with review 3-finger flick down (text mode)
Reads from the current position of the review cursor, moving it as it goes



--
Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.
editing m3u playlist with NVDA

Josh Kennedy
 

Hi,

 

What is the best way to edit an m3u playlisgt with NVDA? I selected a folder full of files, saved as m3u playlist in vlc media player and most files are out of the order they should be played in.

 

Josh

 

 

Sent from Mail for Windows 10

 
Re: kid3 mp3 tag editor

Jackie
 

Josh, you may find it necessary to number them like:
001
010
020
....
100

I rather suspect we'll likely be asked to take it on the chat list if
after this you're still having trouble, & I'm not subscribed. But
maybe this will help out.

On 10/13/19, Josh Kennedy <joshknnd1982@...> wrote:
Hi,

I am trying to edit the tags across multiple mp3 files with this mp3 tag
editor.

https://sourceforge.net/projects/kid3/

I want to set it up so all the mp3 files play in order when I sync my iTunes
library to my iPhone/iPod touch and to do that I have to modify the tags of
each mp3. I don’t know what I’m doing wrong though because when I hit the
tag1 button and it says from filename and then I save, go to tools, number
tracks, hit ok, hit save. Then re-import into iTunes the files are still out
of order. Has anyone used the above software with NVDA? What is the best way
;to make a folder full of mp3 files play in order from first to last? I have
the files numbered 1 through 131. But this does not help.

Josh


Sent from Mail for Windows 10




--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@... with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brighter-vision.com & www.mysitesbeenhacked.com

kid3 mp3 tag editor

Josh Kennedy
 

Hi,

 

I am trying to edit the tags across multiple mp3 files with this mp3 tag editor.

 

https://sourceforge.net/projects/kid3/

 

I want to set it up so all the mp3 files play in order when I sync my iTunes library to my iPhone/iPod touch and to do that I have to modify the tags of each mp3. I don’t know what I’m doing wrong though because when I hit the tag1 button and it says from filename and then I save, go to tools, number tracks, hit ok, hit save. Then re-import into iTunes the files are still out of order. Has anyone used the above software with NVDA? What is the best way ;to make a folder full of mp3 files play in order from first to last? I have the files numbered 1 through 131. But this does not help.

 

Josh

 

 

Sent from Mail for Windows 10

 
mp3 tag editors

Josh Kennedy
 

Hi,

 

I found out the kid3 mp3 tag editor is free and is pretty accessible with NVDA. Do any of you know of any other free mp3 tag editors? It is the only way I can organize a folder full of files I have so they play in order from the first episode to the last episode in iTunes. Otherwise they sinc to my iPhone all out of order.

 

Josh

 

 

Sent from Mail for Windows 10

 
Re: How do I set up a keyboard short cut to start NVDA?

molly the blind tech lover
 

Hi ☺

You  can set control plus alt plus n as the keyboard  shortcut.  I think this can be done by default when you first set up NVDA. It will ask you if you want to create a keyboard shortcut with control plus alt plus n, but you could probably assign a different keystroke.

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of James Bentley
Sent: Sunday, October 13, 2019 8:45 AM
To: NVDA <nvda@nvda.groups.io>
Subject: [nvda] How do I set up a keyboard short cut to start NVDA?

 

Hi,

 

Can I do this inside of NVDA or do I do this in Windows?

 

Thank you,

 

James B

 

 
Re: How do I set up a keyboard short cut to start NVDA?

Hermann-Josef Kurzen
 

Hi,

as we are talking about alt+control+n to start NVDA:
I'm using the latest Version of NVDA in connection with Windows 10.
The hotkey alt+control+n is active so I'm told by Windows.
But it doesn't work.
Is it recommended to run NVDA as an administrator to correct this?


Greetings - Hermann



--- Ursprüngliche Nachricht ---

Von: "Robert Doc Wright godfearer" <godfearer@...> Wichtigkeit Normal
Lesebestätigung wurde nicht angefordert
Gesendet am: 13.10.2019 15:40:54
An: "nvda@nvda.groups.io" <nvda@nvda.groups.io>;
CC:
Betreff: Re: [nvda] How do I set up a keyboard short cut to start NVDA?
Verwendetes Mailprogramm: vermutlich online im WEB erstellt

The shortcut is normally defaulted at alt+control+n You can go into general settings and set it to start with windows. I have never had to create a shortcut for it.

******If we can't look at ourselves, and ask, why?  then where does the learning start?***     

From: James Bentley
Sent: Sunday, October 13, 2019 6:45 AM
To: NVDA
Subject: [nvda] How do I set up a keyboard short cut to start NVDA?

Hi,
 
Can I do this inside of NVDA or do I do this in Windows?
 
Thank you,
 
James B
 
 
Re: How do I set up a keyboard short cut to start NVDA?

Chris
 

you will have to modify the nvda shortcut properties under the general tab you will find a section for shortcut key where you can enter your desired keyboard shortcut sequence

 

 

From: James Bentley
Sent: 13 October 2019 13:45
To: NVDA
Subject: [nvda] How do I set up a keyboard short cut to start NVDA?

 

Hi,

 

Can I do this inside of NVDA or do I do this in Windows?

 

Thank you,

 

James B

 

 

 
Re: How do I set up a keyboard short cut to start NVDA?

Robert Doc Wright godfearer
 

The shortcut is normally defaulted at alt+control+n  You can go into general settings and set it to start with windows. I have never had to create a shortcut for it.

 

******If we can't look at ourselves, and ask, why?  then where does the learning start?***     

 

From: James Bentley
Sent: Sunday, October 13, 2019 6:45 AM
To: NVDA
Subject: [nvda] How do I set up a keyboard short cut to start NVDA?

 

Hi,

 

Can I do this inside of NVDA or do I do this in Windows?

 

Thank you,

 

James B

 

 

 
Re: How do I set up a keyboard short cut to start NVDA?

James Bentley <bentleyj1952@...>
 

Hi,

I thought it could also be done inside of NVDA but I don't see it.

It was no big deal to just set it up in Windows.

I like hearing MS David. Looks like NVDA keeps getting better.

Thanks,

James B

-----Original Message-----
From: Damien Garwood
Sent: Sunday, October 13, 2019 8:00 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] How do I set up a keyboard short cut to start NVDA?

Hi James,
This is done through Windows. The idea is that you set up a shortcut
file in the start menu or on the desktop. Then, when you access its
properties, you can set up the hotkey that will activate it.
If you need help doing this, email me off list and I'll walk you through
the process.
Cheers,
Damien.

On 13/10/2019 01:45 pm, James Bentley wrote:
Hi,
Can I do this inside of NVDA or do I do this in Windows?
Thank you,
James B
36961 - 36980 of 103159