Date   

Re: Sorry I missed NVDACon would love any recordings

Quentin Christensen
 

The recordings will all be up on the NVDACon website in the next few days (say a week or so just in case).  I know most of the organising committee are in the group here so I have no doubt they will announce as recordings are available at https://www.nvdacon.org/

On Mon, Jun 4, 2018 at 9:59 AM, The Wolf <hank.smith966@...> wrote:

can I get the recordings as well?


On 6/3/2018 4:50 PM, David Moore wrote:

Hi all in the NVDA community!

I, David Moore, wanted to be a part of NVDACon so much.

However, it was my wife’s birthday on the second, and I had Bible study Friday night on the first.

I would love any recordings that anyone might have. Please right me off list, if you have any information on the future of NVDA that I missed.

You all mean so much to me.

Have a great day, all of you.

David Moore

Sent from Mail for Windows 10

 


-- 
check out my song on youtube
https://youtu.be/YeWgx2LRu7Y




--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: NVDA 2018.2rc2 now available

Quentin Christensen
 

Thank you - the add-on may not have anything to do with it, but testing with it disabled is a good starting point.

On Mon, Jun 4, 2018 at 12:59 AM, Jason White via Groups.Io <jason@...> wrote:

Yes, the problem is similar to several of those reported in GitHub, except that I’m testing with a VFO/Freedom Scientific Focus display, and the display is successfully detected after resuming from laptop suspend – it’s just lost during the transition from the log-in dialogue to the desktop.

 

I think the problem occurred before I installed the BrailleExtender add-on, but I’ll retest with the add-on disabled.

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Quentin Christensen
Sent: Sunday, June 3, 2018 7:03 AM


To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA 2018.2rc2 now available

 

There's a couple of issues on GitHub on that - not sure if they are Braille display brand specific, but could you please have a look and let me know if any of those match what you are experiencing?  Just so we can make sure your issues is recorded.  https://github.com/nvaccess/nvda/issues?utf8=%E2%9C%93&q=is%3Aissue+is%3Aopen+braille+wake

 

Also you mentioned using the Braille-Extender add-on - I wanted to clarify - does the issue happen with that add-on enabled specifically?  IE if you disable the add-on does your display wake when the computer does?

 

Regards

 

Quentin.

 

On Sun, Jun 3, 2018 at 5:20 AM, Jason White via Groups.Io <jason@...> wrote:

Having just upgraded a machine to 2018.2-rc2, everything seems to be stable so far, including the Braille-Extender add-on. I’m still experiencing the issue with the braille display not being active after returning to the desktop from laptop suspend (it’s properly re-activated during the log-in dialogue, but lost upon returning to the desktop). I reported the details in another thread.

 

However, I was seeing that problem under 2018.1, so it isn’t a regression in 2018.2.

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Quentin Christensen
Sent: Friday, June 1, 2018 7:00 AM


To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA 2018.2rc2 now available

 

Thanks Felix!

 

Also, for those used to getting to the settings dialogs with the shortcut keys (NVDA+control+k to get to keyboard, NVDA+control+d for document formatting etc), those keys all still work.  It's just if you go via the NVDA menu, the key sequence has slightly changed.

 

On Fri, Jun 1, 2018 at 8:53 PM, Felix G. <constantlyvariable@...> wrote:

Wow! Congrats on an excellent RC from my point of view.

Just noticed that the preferences dialogs have been completely redesigned as a single dialog with categories. That'll take some getting used to, but I think the move is rational.

Best,

Felix

 

2018-06-01 2:31 GMT+02:00 Quentin Christensen <quentin@...>:

No problem at all - and a much easier fix than if we had broken speech in the new version :)

 

On Fri, Jun 1, 2018 at 10:26 AM, Gary Metzler <gmtravel@...> wrote:

Hi Quentin,

 

Boy, do I feel stupid.  I installed 1803.1 rc2 by mistake.  I installed the correct version and all is working as it should.  Thanks,  

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Quentin Christensen
Sent: Thursday, May 31, 2018 8:06 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA 2018.2rc2 now available

 

Hi Gary,

 

By "Verra", do you mean Microsoft Zira (and if so, SAPI 5 or OneCore?) or do you know which synthesizer or language she comes with?

If a OneCore voice, we released NVDA 2018.1.1 specifically to address the OneCore voices from sounding like chipmunks in the Windows 10 April update, so if anything updating from anything to NVDA 2018.2rc2 should be more likely to fix that issue than cause it.  What do you have the rate and pitch etc set to, and what do you have the speed set to in Windows speech settings?

 

I have been using eSpeak lately, but I changed to OneCore and SAPI 5 and I don't notice anything odd about Zira myself (happy to admit, that could just be "myself")

 

Regards

 

Quentin.

 

On Fri, Jun 1, 2018 at 5:51 AM, Gary Metzler <gmtravel@...> wrote:

Hi Quentin,

 

I just installed rc2.  I j\ use verra now she sounds like she is on helium.  What can I do to get it back the way I like it?  Thanks for any help.  

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Quentin Christensen
Sent: Thursday, May 31, 2018 7:38 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA 2018.2rc2 now available

 

Hi everyone,

 

Well I was a little slow to post about NVDA 2018.2rc1, and before I had a chance, rc2 is out!

 

This is a release candidate, which means that unless any critical issues are found, this will be identical to the final 2018.2 release.

 

Highlights of this release include Support for tables in Kindle for PC, support for HumanWare BrailleNote Touch and BI14 Braille displays, Improvements to both Onecore and Sapi5 speech synthesizers, improvements in Microsoft Outlook and much more.

 

You can download NVDA 2018.2rc2 here: https://www.nvaccess.org/download?nvdaVersion=2018.2rc2

 

 

Kind regards

 

Quentin.

--

Quentin Christensen
Training and Support Manager

 

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

 

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 



 

--

Quentin Christensen
Training and Support Manager

 

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

 

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 



 

--

Quentin Christensen
Training and Support Manager

 

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

 

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 

 



 

--

Quentin Christensen
Training and Support Manager

 

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

 

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 



 

--

Quentin Christensen
Training and Support Manager

 

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

 

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 




--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: browse mode

Sam Taylor
 

This comes from a forum so has no guarantee: 

Hi,

You could just stop all the Sophos services if you're a local admin.

The following command would do it:

wmic service where "caption like '%Sophos%'" call stopservice

Note: Change stopservice to startservice to start them back up.


On 4 Jun 2018, at 10:00, Brennen Kinch <brennenkinch@...> wrote:

how do i disabel it


On Jun 3, 2018, at 7:59 PM, Sam Taylor <samtaylor9@...> wrote:

That may well be the problem. You may like to try an alternative or temporarily disable it, seeing if the problem is eleviated. 


On 4 Jun 2018, at 09:56, Brennen Kinch <brennenkinch@...> wrote:

I am running sophos antivirus


On Jun 3, 2018, at 7:50 PM, Sam Taylor <samtaylor9@...> wrote:

Are you running HitMan Alert or a Sofos Antivirus professional product? These can play havoc with keyboard mappings and NVDA. 


On 4 Jun 2018, at 09:48, Brennen Kinch <brennenkinch@...> wrote:

yah sorry i don’t do so well talking about problems through email but yes the problem occurs with every shortcut key in brows mode and it seems to do just about every other action but the action it supposed to do


On Jun 3, 2018, at 7:33 PM, Gene <gsasner@...> wrote:

The symptoms described don't match the problem.  Here is the original description:
 
when I press the H key for headings it says no checkboxes no edit box no link but it doesn’t say anything about headings
Nothing was stated about web pages not being able to be read.  Nothing was said about any occurrence of the word "unknown" being spoken. 
 
I have never seen this description of symptoms associated with the problem the corrective procedure is supposed to correct.  I see no reason to perform this corrective procedure until there is some indication that the problem has any of the symptoms associated with the problem this procedure is supposed to fix.
Gene
----- Original Message -----

Sent: Sunday, June 03, 2018 5:45 PM
Subject: Re: [nvda] browse mode

the tool Brian is refering to if it is the same bug i think it might be
grab a copy of nvda 2018.2 rc2 and download it and install it to your
computer. Then while nvda is running use the nvda key + letter N to go
into the preferences of nvda then go to tools a sub menu will come off
it then locate the following menu called Run COM Registration Fixing
tool... then press the enter key.

I am not sure after that but after the process should register any
broken dlls that nvda needs to use.

let us know if it does the trick.

By the way after you press the enter key on it the menu e pointed you
towards i am not sure if there are any thing or screen after that to follow.

Gene nz

On 6/3/2018 9:30 PM, Brian's Mail list account via Groups.Io wrote:
> If you can run the latest master, and the problem is what I think is
> being suspected, then it has a tool that attempts to fix such problems
> in windows installations.
> Brian
>
> bglists@...
> Sent via blueyonder.
> Please address personal E-mail to:-
> briang1@..., putting 'Brian Gaff'
> in the display name field.
> ----- Original Message ----- From: "Brennen Kinch"
> <brennenkinch@...>
> To: <nvda@nvda.groups.io>
> Sent: Sunday, June 03, 2018 1:51 AM
> Subject: Re: [nvda] browse mode
>
>
> can I Skype with Eugene so we can work out some of those things I’m
> not sure I could write them all down in the email
>> On Jun 2, 2018, at 8:49 PM, Gene New Zealand
>> <hurrikennyandopo@...> wrote:
>>
>> hi
>>
>>
>> Out of curiosity do you hear sounds or hear browse mode and focus mode
>> when you go between those modes?
>>
>>
>> if it is the sound one i think you hear a letter sound and when you are
>> out of focus mode you hear another sound.
>>
>>
>> if you want to hear them spoken have a look under the browse mode
>> settings and uncheck the following box called Audio indication of focus
>> and browse modes
>>
>> then save your settings.
>>
>>
>> If you tab a couple of times do you hear unknown or pane?
>>
>>
>> Do you also hear it under say the running applications part on windows
>> and it is not speaking the icons down there and some other stuff like
>> that?
>>
>>
>> By the way which version of nvda are you running? did you download the
>> latest nvda 2018.2 rc2 version if so there is a tool in this version of
>> nvda that might fix it.
>>
>>
>> If you are not really getting that stuff then we can sus some thing else
>> out and maybe narrow it a little.
>>
>>
>> Gene nz
>>
>>
>>
>>> On 6/3/2018 11:50 AM, Brennen Kinch wrote:
>>> no I’m using the full version of NVDA not any snapshots also it
>>> looks like I am in the full webpage when I’m doing this so I’m not
>>> sure what’s going on and it seems to be happening with all web
>>> browsers as well
>>>> On Jun 2, 2018, at 5:06 PM, Brennen Kinch <brennenkinch@...>
>>>> wrote:
>>>>
>>>> hi has anyone had any trouble with using brows mode in latest
>>>> versions of NVDA
>>>> particularly with using the shortcut keys in brows mode for example
>>>> when I press the H key for headings it says no checkboxes no edit
>>>> box no link but it doesn’t say anything about headings
>>>> I have tried uninstalling and reinstalling NVDA am resetting my
>>>> configurations of no luck can anyone please help me
>>>>
>>>> Sent from my iPhone
>>>
>>>
>>
>>
>>
>>
>
>
>
>
>
>





Re: browse mode

Brennen Kinch
 

how do i disabel it


On Jun 3, 2018, at 7:59 PM, Sam Taylor <samtaylor9@...> wrote:

That may well be the problem. You may like to try an alternative or temporarily disable it, seeing if the problem is eleviated. 


On 4 Jun 2018, at 09:56, Brennen Kinch <brennenkinch@...> wrote:

I am running sophos antivirus


On Jun 3, 2018, at 7:50 PM, Sam Taylor <samtaylor9@...> wrote:

Are you running HitMan Alert or a Sofos Antivirus professional product? These can play havoc with keyboard mappings and NVDA. 


On 4 Jun 2018, at 09:48, Brennen Kinch <brennenkinch@...> wrote:

yah sorry i don’t do so well talking about problems through email but yes the problem occurs with every shortcut key in brows mode and it seems to do just about every other action but the action it supposed to do


On Jun 3, 2018, at 7:33 PM, Gene <gsasner@...> wrote:

The symptoms described don't match the problem.  Here is the original description:
 
when I press the H key for headings it says no checkboxes no edit box no link but it doesn’t say anything about headings
Nothing was stated about web pages not being able to be read.  Nothing was said about any occurrence of the word "unknown" being spoken. 
 
I have never seen this description of symptoms associated with the problem the corrective procedure is supposed to correct.  I see no reason to perform this corrective procedure until there is some indication that the problem has any of the symptoms associated with the problem this procedure is supposed to fix.
Gene
----- Original Message -----

Sent: Sunday, June 03, 2018 5:45 PM
Subject: Re: [nvda] browse mode

the tool Brian is refering to if it is the same bug i think it might be
grab a copy of nvda 2018.2 rc2 and download it and install it to your
computer. Then while nvda is running use the nvda key + letter N to go
into the preferences of nvda then go to tools a sub menu will come off
it then locate the following menu called Run COM Registration Fixing
tool... then press the enter key.

I am not sure after that but after the process should register any
broken dlls that nvda needs to use.

let us know if it does the trick.

By the way after you press the enter key on it the menu e pointed you
towards i am not sure if there are any thing or screen after that to follow.

Gene nz

On 6/3/2018 9:30 PM, Brian's Mail list account via Groups.Io wrote:
> If you can run the latest master, and the problem is what I think is
> being suspected, then it has a tool that attempts to fix such problems
> in windows installations.
> Brian
>
> bglists@...
> Sent via blueyonder.
> Please address personal E-mail to:-
> briang1@..., putting 'Brian Gaff'
> in the display name field.
> ----- Original Message ----- From: "Brennen Kinch"
> <brennenkinch@...>
> To: <nvda@nvda.groups.io>
> Sent: Sunday, June 03, 2018 1:51 AM
> Subject: Re: [nvda] browse mode
>
>
> can I Skype with Eugene so we can work out some of those things I’m
> not sure I could write them all down in the email
>> On Jun 2, 2018, at 8:49 PM, Gene New Zealand
>> <hurrikennyandopo@...> wrote:
>>
>> hi
>>
>>
>> Out of curiosity do you hear sounds or hear browse mode and focus mode
>> when you go between those modes?
>>
>>
>> if it is the sound one i think you hear a letter sound and when you are
>> out of focus mode you hear another sound.
>>
>>
>> if you want to hear them spoken have a look under the browse mode
>> settings and uncheck the following box called Audio indication of focus
>> and browse modes
>>
>> then save your settings.
>>
>>
>> If you tab a couple of times do you hear unknown or pane?
>>
>>
>> Do you also hear it under say the running applications part on windows
>> and it is not speaking the icons down there and some other stuff like
>> that?
>>
>>
>> By the way which version of nvda are you running? did you download the
>> latest nvda 2018.2 rc2 version if so there is a tool in this version of
>> nvda that might fix it.
>>
>>
>> If you are not really getting that stuff then we can sus some thing else
>> out and maybe narrow it a little.
>>
>>
>> Gene nz
>>
>>
>>
>>> On 6/3/2018 11:50 AM, Brennen Kinch wrote:
>>> no I’m using the full version of NVDA not any snapshots also it
>>> looks like I am in the full webpage when I’m doing this so I’m not
>>> sure what’s going on and it seems to be happening with all web
>>> browsers as well
>>>> On Jun 2, 2018, at 5:06 PM, Brennen Kinch <brennenkinch@...>
>>>> wrote:
>>>>
>>>> hi has anyone had any trouble with using brows mode in latest
>>>> versions of NVDA
>>>> particularly with using the shortcut keys in brows mode for example
>>>> when I press the H key for headings it says no checkboxes no edit
>>>> box no link but it doesn’t say anything about headings
>>>> I have tried uninstalling and reinstalling NVDA am resetting my
>>>> configurations of no luck can anyone please help me
>>>>
>>>> Sent from my iPhone
>>>
>>>
>>
>>
>>
>>
>
>
>
>
>
>





Re: Sorry I missed NVDACon would love any recordings

 

can I get the recordings as well?


On 6/3/2018 4:50 PM, David Moore wrote:

Hi all in the NVDA community!

I, David Moore, wanted to be a part of NVDACon so much.

However, it was my wife’s birthday on the second, and I had Bible study Friday night on the first.

I would love any recordings that anyone might have. Please right me off list, if you have any information on the future of NVDA that I missed.

You all mean so much to me.

Have a great day, all of you.

David Moore

Sent from Mail for Windows 10

 


-- 
check out my song on youtube
https://youtu.be/YeWgx2LRu7Y


Re: browse mode

Sam Taylor
 

That may well be the problem. You may like to try an alternative or temporarily disable it, seeing if the problem is eleviated. 


On 4 Jun 2018, at 09:56, Brennen Kinch <brennenkinch@...> wrote:

I am running sophos antivirus


On Jun 3, 2018, at 7:50 PM, Sam Taylor <samtaylor9@...> wrote:

Are you running HitMan Alert or a Sofos Antivirus professional product? These can play havoc with keyboard mappings and NVDA. 


On 4 Jun 2018, at 09:48, Brennen Kinch <brennenkinch@...> wrote:

yah sorry i don’t do so well talking about problems through email but yes the problem occurs with every shortcut key in brows mode and it seems to do just about every other action but the action it supposed to do


On Jun 3, 2018, at 7:33 PM, Gene <gsasner@...> wrote:

The symptoms described don't match the problem.  Here is the original description:
 
when I press the H key for headings it says no checkboxes no edit box no link but it doesn’t say anything about headings
Nothing was stated about web pages not being able to be read.  Nothing was said about any occurrence of the word "unknown" being spoken. 
 
I have never seen this description of symptoms associated with the problem the corrective procedure is supposed to correct.  I see no reason to perform this corrective procedure until there is some indication that the problem has any of the symptoms associated with the problem this procedure is supposed to fix.
Gene
----- Original Message -----

Sent: Sunday, June 03, 2018 5:45 PM
Subject: Re: [nvda] browse mode

the tool Brian is refering to if it is the same bug i think it might be
grab a copy of nvda 2018.2 rc2 and download it and install it to your
computer. Then while nvda is running use the nvda key + letter N to go
into the preferences of nvda then go to tools a sub menu will come off
it then locate the following menu called Run COM Registration Fixing
tool... then press the enter key.

I am not sure after that but after the process should register any
broken dlls that nvda needs to use.

let us know if it does the trick.

By the way after you press the enter key on it the menu e pointed you
towards i am not sure if there are any thing or screen after that to follow.

Gene nz

On 6/3/2018 9:30 PM, Brian's Mail list account via Groups.Io wrote:
> If you can run the latest master, and the problem is what I think is
> being suspected, then it has a tool that attempts to fix such problems
> in windows installations.
> Brian
>
> bglists@...
> Sent via blueyonder.
> Please address personal E-mail to:-
> briang1@..., putting 'Brian Gaff'
> in the display name field.
> ----- Original Message ----- From: "Brennen Kinch"
> <brennenkinch@...>
> To: <nvda@nvda.groups.io>
> Sent: Sunday, June 03, 2018 1:51 AM
> Subject: Re: [nvda] browse mode
>
>
> can I Skype with Eugene so we can work out some of those things I’m
> not sure I could write them all down in the email
>> On Jun 2, 2018, at 8:49 PM, Gene New Zealand
>> <hurrikennyandopo@...> wrote:
>>
>> hi
>>
>>
>> Out of curiosity do you hear sounds or hear browse mode and focus mode
>> when you go between those modes?
>>
>>
>> if it is the sound one i think you hear a letter sound and when you are
>> out of focus mode you hear another sound.
>>
>>
>> if you want to hear them spoken have a look under the browse mode
>> settings and uncheck the following box called Audio indication of focus
>> and browse modes
>>
>> then save your settings.
>>
>>
>> If you tab a couple of times do you hear unknown or pane?
>>
>>
>> Do you also hear it under say the running applications part on windows
>> and it is not speaking the icons down there and some other stuff like
>> that?
>>
>>
>> By the way which version of nvda are you running? did you download the
>> latest nvda 2018.2 rc2 version if so there is a tool in this version of
>> nvda that might fix it.
>>
>>
>> If you are not really getting that stuff then we can sus some thing else
>> out and maybe narrow it a little.
>>
>>
>> Gene nz
>>
>>
>>
>>> On 6/3/2018 11:50 AM, Brennen Kinch wrote:
>>> no I’m using the full version of NVDA not any snapshots also it
>>> looks like I am in the full webpage when I’m doing this so I’m not
>>> sure what’s going on and it seems to be happening with all web
>>> browsers as well
>>>> On Jun 2, 2018, at 5:06 PM, Brennen Kinch <brennenkinch@...>
>>>> wrote:
>>>>
>>>> hi has anyone had any trouble with using brows mode in latest
>>>> versions of NVDA
>>>> particularly with using the shortcut keys in brows mode for example
>>>> when I press the H key for headings it says no checkboxes no edit
>>>> box no link but it doesn’t say anything about headings
>>>> I have tried uninstalling and reinstalling NVDA am resetting my
>>>> configurations of no luck can anyone please help me
>>>>
>>>> Sent from my iPhone
>>>
>>>
>>
>>
>>
>>
>
>
>
>
>
>





Re: browse mode

Brennen Kinch
 

I am running sophos antivirus


On Jun 3, 2018, at 7:50 PM, Sam Taylor <samtaylor9@...> wrote:

Are you running HitMan Alert or a Sofos Antivirus professional product? These can play havoc with keyboard mappings and NVDA. 


On 4 Jun 2018, at 09:48, Brennen Kinch <brennenkinch@...> wrote:

yah sorry i don’t do so well talking about problems through email but yes the problem occurs with every shortcut key in brows mode and it seems to do just about every other action but the action it supposed to do


On Jun 3, 2018, at 7:33 PM, Gene <gsasner@...> wrote:

The symptoms described don't match the problem.  Here is the original description:
 
when I press the H key for headings it says no checkboxes no edit box no link but it doesn’t say anything about headings
Nothing was stated about web pages not being able to be read.  Nothing was said about any occurrence of the word "unknown" being spoken. 
 
I have never seen this description of symptoms associated with the problem the corrective procedure is supposed to correct.  I see no reason to perform this corrective procedure until there is some indication that the problem has any of the symptoms associated with the problem this procedure is supposed to fix.
Gene
----- Original Message -----

Sent: Sunday, June 03, 2018 5:45 PM
Subject: Re: [nvda] browse mode

the tool Brian is refering to if it is the same bug i think it might be
grab a copy of nvda 2018.2 rc2 and download it and install it to your
computer. Then while nvda is running use the nvda key + letter N to go
into the preferences of nvda then go to tools a sub menu will come off
it then locate the following menu called Run COM Registration Fixing
tool... then press the enter key.

I am not sure after that but after the process should register any
broken dlls that nvda needs to use.

let us know if it does the trick.

By the way after you press the enter key on it the menu e pointed you
towards i am not sure if there are any thing or screen after that to follow.

Gene nz

On 6/3/2018 9:30 PM, Brian's Mail list account via Groups.Io wrote:
> If you can run the latest master, and the problem is what I think is
> being suspected, then it has a tool that attempts to fix such problems
> in windows installations.
> Brian
>
> bglists@...
> Sent via blueyonder.
> Please address personal E-mail to:-
> briang1@..., putting 'Brian Gaff'
> in the display name field.
> ----- Original Message ----- From: "Brennen Kinch"
> <brennenkinch@...>
> To: <nvda@nvda.groups.io>
> Sent: Sunday, June 03, 2018 1:51 AM
> Subject: Re: [nvda] browse mode
>
>
> can I Skype with Eugene so we can work out some of those things I’m
> not sure I could write them all down in the email
>> On Jun 2, 2018, at 8:49 PM, Gene New Zealand
>> <hurrikennyandopo@...> wrote:
>>
>> hi
>>
>>
>> Out of curiosity do you hear sounds or hear browse mode and focus mode
>> when you go between those modes?
>>
>>
>> if it is the sound one i think you hear a letter sound and when you are
>> out of focus mode you hear another sound.
>>
>>
>> if you want to hear them spoken have a look under the browse mode
>> settings and uncheck the following box called Audio indication of focus
>> and browse modes
>>
>> then save your settings.
>>
>>
>> If you tab a couple of times do you hear unknown or pane?
>>
>>
>> Do you also hear it under say the running applications part on windows
>> and it is not speaking the icons down there and some other stuff like
>> that?
>>
>>
>> By the way which version of nvda are you running? did you download the
>> latest nvda 2018.2 rc2 version if so there is a tool in this version of
>> nvda that might fix it.
>>
>>
>> If you are not really getting that stuff then we can sus some thing else
>> out and maybe narrow it a little.
>>
>>
>> Gene nz
>>
>>
>>
>>> On 6/3/2018 11:50 AM, Brennen Kinch wrote:
>>> no I’m using the full version of NVDA not any snapshots also it
>>> looks like I am in the full webpage when I’m doing this so I’m not
>>> sure what’s going on and it seems to be happening with all web
>>> browsers as well
>>>> On Jun 2, 2018, at 5:06 PM, Brennen Kinch <brennenkinch@...>
>>>> wrote:
>>>>
>>>> hi has anyone had any trouble with using brows mode in latest
>>>> versions of NVDA
>>>> particularly with using the shortcut keys in brows mode for example
>>>> when I press the H key for headings it says no checkboxes no edit
>>>> box no link but it doesn’t say anything about headings
>>>> I have tried uninstalling and reinstalling NVDA am resetting my
>>>> configurations of no luck can anyone please help me
>>>>
>>>> Sent from my iPhone
>>>
>>>
>>
>>
>>
>>
>
>
>
>
>
>





Re: browse mode

Sam Taylor
 

Are you running HitMan Alert or a Sofos Antivirus professional product? These can play havoc with keyboard mappings and NVDA. 


On 4 Jun 2018, at 09:48, Brennen Kinch <brennenkinch@...> wrote:

yah sorry i don’t do so well talking about problems through email but yes the problem occurs with every shortcut key in brows mode and it seems to do just about every other action but the action it supposed to do


On Jun 3, 2018, at 7:33 PM, Gene <gsasner@...> wrote:

The symptoms described don't match the problem.  Here is the original description:
 
when I press the H key for headings it says no checkboxes no edit box no link but it doesn’t say anything about headings
Nothing was stated about web pages not being able to be read.  Nothing was said about any occurrence of the word "unknown" being spoken. 
 
I have never seen this description of symptoms associated with the problem the corrective procedure is supposed to correct.  I see no reason to perform this corrective procedure until there is some indication that the problem has any of the symptoms associated with the problem this procedure is supposed to fix.
Gene
----- Original Message -----

Sent: Sunday, June 03, 2018 5:45 PM
Subject: Re: [nvda] browse mode

the tool Brian is refering to if it is the same bug i think it might be
grab a copy of nvda 2018.2 rc2 and download it and install it to your
computer. Then while nvda is running use the nvda key + letter N to go
into the preferences of nvda then go to tools a sub menu will come off
it then locate the following menu called Run COM Registration Fixing
tool... then press the enter key.

I am not sure after that but after the process should register any
broken dlls that nvda needs to use.

let us know if it does the trick.

By the way after you press the enter key on it the menu e pointed you
towards i am not sure if there are any thing or screen after that to follow.

Gene nz

On 6/3/2018 9:30 PM, Brian's Mail list account via Groups.Io wrote:
> If you can run the latest master, and the problem is what I think is
> being suspected, then it has a tool that attempts to fix such problems
> in windows installations.
> Brian
>
> bglists@...
> Sent via blueyonder.
> Please address personal E-mail to:-
> briang1@..., putting 'Brian Gaff'
> in the display name field.
> ----- Original Message ----- From: "Brennen Kinch"
> <brennenkinch@...>
> To: <nvda@nvda.groups.io>
> Sent: Sunday, June 03, 2018 1:51 AM
> Subject: Re: [nvda] browse mode
>
>
> can I Skype with Eugene so we can work out some of those things I’m
> not sure I could write them all down in the email
>> On Jun 2, 2018, at 8:49 PM, Gene New Zealand
>> <hurrikennyandopo@...> wrote:
>>
>> hi
>>
>>
>> Out of curiosity do you hear sounds or hear browse mode and focus mode
>> when you go between those modes?
>>
>>
>> if it is the sound one i think you hear a letter sound and when you are
>> out of focus mode you hear another sound.
>>
>>
>> if you want to hear them spoken have a look under the browse mode
>> settings and uncheck the following box called Audio indication of focus
>> and browse modes
>>
>> then save your settings.
>>
>>
>> If you tab a couple of times do you hear unknown or pane?
>>
>>
>> Do you also hear it under say the running applications part on windows
>> and it is not speaking the icons down there and some other stuff like
>> that?
>>
>>
>> By the way which version of nvda are you running? did you download the
>> latest nvda 2018.2 rc2 version if so there is a tool in this version of
>> nvda that might fix it.
>>
>>
>> If you are not really getting that stuff then we can sus some thing else
>> out and maybe narrow it a little.
>>
>>
>> Gene nz
>>
>>
>>
>>> On 6/3/2018 11:50 AM, Brennen Kinch wrote:
>>> no I’m using the full version of NVDA not any snapshots also it
>>> looks like I am in the full webpage when I’m doing this so I’m not
>>> sure what’s going on and it seems to be happening with all web
>>> browsers as well
>>>> On Jun 2, 2018, at 5:06 PM, Brennen Kinch <brennenkinch@...>
>>>> wrote:
>>>>
>>>> hi has anyone had any trouble with using brows mode in latest
>>>> versions of NVDA
>>>> particularly with using the shortcut keys in brows mode for example
>>>> when I press the H key for headings it says no checkboxes no edit
>>>> box no link but it doesn’t say anything about headings
>>>> I have tried uninstalling and reinstalling NVDA am resetting my
>>>> configurations of no luck can anyone please help me
>>>>
>>>> Sent from my iPhone
>>>
>>>
>>
>>
>>
>>
>
>
>
>
>
>





Sorry I missed NVDACon would love any recordings

David Moore
 

Hi all in the NVDA community!

I, David Moore, wanted to be a part of NVDACon so much.

However, it was my wife’s birthday on the second, and I had Bible study Friday night on the first.

I would love any recordings that anyone might have. Please right me off list, if you have any information on the future of NVDA that I missed.

You all mean so much to me.

Have a great day, all of you.

David Moore

Sent from Mail for Windows 10

 


Re: browse mode

Brennen Kinch
 

yah sorry i don’t do so well talking about problems through email but yes the problem occurs with every shortcut key in brows mode and it seems to do just about every other action but the action it supposed to do


On Jun 3, 2018, at 7:33 PM, Gene <gsasner@...> wrote:

The symptoms described don't match the problem.  Here is the original description:
 
when I press the H key for headings it says no checkboxes no edit box no link but it doesn’t say anything about headings
Nothing was stated about web pages not being able to be read.  Nothing was said about any occurrence of the word "unknown" being spoken. 
 
I have never seen this description of symptoms associated with the problem the corrective procedure is supposed to correct.  I see no reason to perform this corrective procedure until there is some indication that the problem has any of the symptoms associated with the problem this procedure is supposed to fix.
Gene
----- Original Message -----

Sent: Sunday, June 03, 2018 5:45 PM
Subject: Re: [nvda] browse mode

the tool Brian is refering to if it is the same bug i think it might be
grab a copy of nvda 2018.2 rc2 and download it and install it to your
computer. Then while nvda is running use the nvda key + letter N to go
into the preferences of nvda then go to tools a sub menu will come off
it then locate the following menu called Run COM Registration Fixing
tool... then press the enter key.

I am not sure after that but after the process should register any
broken dlls that nvda needs to use.

let us know if it does the trick.

By the way after you press the enter key on it the menu e pointed you
towards i am not sure if there are any thing or screen after that to follow.

Gene nz

On 6/3/2018 9:30 PM, Brian's Mail list account via Groups.Io wrote:
> If you can run the latest master, and the problem is what I think is
> being suspected, then it has a tool that attempts to fix such problems
> in windows installations.
> Brian
>
> bglists@...
> Sent via blueyonder.
> Please address personal E-mail to:-
> briang1@..., putting 'Brian Gaff'
> in the display name field.
> ----- Original Message ----- From: "Brennen Kinch"
> <brennenkinch@...>
> To: <nvda@nvda.groups.io>
> Sent: Sunday, June 03, 2018 1:51 AM
> Subject: Re: [nvda] browse mode
>
>
> can I Skype with Eugene so we can work out some of those things I’m
> not sure I could write them all down in the email
>> On Jun 2, 2018, at 8:49 PM, Gene New Zealand
>> <hurrikennyandopo@...> wrote:
>>
>> hi
>>
>>
>> Out of curiosity do you hear sounds or hear browse mode and focus mode
>> when you go between those modes?
>>
>>
>> if it is the sound one i think you hear a letter sound and when you are
>> out of focus mode you hear another sound.
>>
>>
>> if you want to hear them spoken have a look under the browse mode
>> settings and uncheck the following box called Audio indication of focus
>> and browse modes
>>
>> then save your settings.
>>
>>
>> If you tab a couple of times do you hear unknown or pane?
>>
>>
>> Do you also hear it under say the running applications part on windows
>> and it is not speaking the icons down there and some other stuff like
>> that?
>>
>>
>> By the way which version of nvda are you running? did you download the
>> latest nvda 2018.2 rc2 version if so there is a tool in this version of
>> nvda that might fix it.
>>
>>
>> If you are not really getting that stuff then we can sus some thing else
>> out and maybe narrow it a little.
>>
>>
>> Gene nz
>>
>>
>>
>>> On 6/3/2018 11:50 AM, Brennen Kinch wrote:
>>> no I’m using the full version of NVDA not any snapshots also it
>>> looks like I am in the full webpage when I’m doing this so I’m not
>>> sure what’s going on and it seems to be happening with all web
>>> browsers as well
>>>> On Jun 2, 2018, at 5:06 PM, Brennen Kinch <brennenkinch@...>
>>>> wrote:
>>>>
>>>> hi has anyone had any trouble with using brows mode in latest
>>>> versions of NVDA
>>>> particularly with using the shortcut keys in brows mode for example
>>>> when I press the H key for headings it says no checkboxes no edit
>>>> box no link but it doesn’t say anything about headings
>>>> I have tried uninstalling and reinstalling NVDA am resetting my
>>>> configurations of no luck can anyone please help me
>>>>
>>>> Sent from my iPhone
>>>
>>>
>>
>>
>>
>>
>
>
>
>
>
>





Re: browse mode

Gene
 

The symptoms described don't match the problem.  Here is the original description:
 
when I press the H key for headings it says no checkboxes no edit box no link but it doesn’t say anything about headings
Nothing was stated about web pages not being able to be read.  Nothing was said about any occurrence of the word "unknown" being spoken. 
 
I have never seen this description of symptoms associated with the problem the corrective procedure is supposed to correct.  I see no reason to perform this corrective procedure until there is some indication that the problem has any of the symptoms associated with the problem this procedure is supposed to fix.
Gene
----- Original Message -----

Sent: Sunday, June 03, 2018 5:45 PM
Subject: Re: [nvda] browse mode

the tool Brian is refering to if it is the same bug i think it might be
grab a copy of nvda 2018.2 rc2 and download it and install it to your
computer. Then while nvda is running use the nvda key + letter N to go
into the preferences of nvda then go to tools a sub menu will come off
it then locate the following menu called Run COM Registration Fixing
tool... then press the enter key.

I am not sure after that but after the process should register any
broken dlls that nvda needs to use.

let us know if it does the trick.

By the way after you press the enter key on it the menu e pointed you
towards i am not sure if there are any thing or screen after that to follow.

Gene nz

On 6/3/2018 9:30 PM, Brian's Mail list account via Groups.Io wrote:
> If you can run the latest master, and the problem is what I think is
> being suspected, then it has a tool that attempts to fix such problems
> in windows installations.
> Brian
>
> bglists@...
> Sent via blueyonder.
> Please address personal E-mail to:-
> briang1@..., putting 'Brian Gaff'
> in the display name field.
> ----- Original Message ----- From: "Brennen Kinch"
> <brennenkinch@...>
> To: <nvda@nvda.groups.io>
> Sent: Sunday, June 03, 2018 1:51 AM
> Subject: Re: [nvda] browse mode
>
>
> can I Skype with Eugene so we can work out some of those things I’m
> not sure I could write them all down in the email
>> On Jun 2, 2018, at 8:49 PM, Gene New Zealand
>> <hurrikennyandopo@...> wrote:
>>
>> hi
>>
>>
>> Out of curiosity do you hear sounds or hear browse mode and focus mode
>> when you go between those modes?
>>
>>
>> if it is the sound one i think you hear a letter sound and when you are
>> out of focus mode you hear another sound.
>>
>>
>> if you want to hear them spoken have a look under the browse mode
>> settings and uncheck the following box called Audio indication of focus
>> and browse modes
>>
>> then save your settings.
>>
>>
>> If you tab a couple of times do you hear unknown or pane?
>>
>>
>> Do you also hear it under say the running applications part on windows
>> and it is not speaking the icons down there and some other stuff like
>> that?
>>
>>
>> By the way which version of nvda are you running? did you download the
>> latest nvda 2018.2 rc2 version if so there is a tool in this version of
>> nvda that might fix it.
>>
>>
>> If you are not really getting that stuff then we can sus some thing else
>> out and maybe narrow it a little.
>>
>>
>> Gene nz
>>
>>
>>
>>> On 6/3/2018 11:50 AM, Brennen Kinch wrote:
>>> no I’m using the full version of NVDA not any snapshots also it
>>> looks like I am in the full webpage when I’m doing this so I’m not
>>> sure what’s going on and it seems to be happening with all web
>>> browsers as well
>>>> On Jun 2, 2018, at 5:06 PM, Brennen Kinch <brennenkinch@...>
>>>> wrote:
>>>>
>>>> hi has anyone had any trouble with using brows mode in latest
>>>> versions of NVDA
>>>> particularly with using the shortcut keys in brows mode for example
>>>> when I press the H key for headings it says no checkboxes no edit
>>>> box no link but it doesn’t say anything about headings
>>>> I have tried uninstalling and reinstalling NVDA am resetting my
>>>> configurations of no luck can anyone please help me
>>>>
>>>> Sent from my iPhone
>>>
>>>
>>
>>
>>
>>
>
>
>
>
>
>





Re: browse mode

Brennen Kinch
 

how do i find the rc versions

On Jun 3, 2018, at 6:45 PM, Gene New Zealand <hurrikennyandopo@outlook.co.nz> wrote:

the tool Brian is refering to if it is the same bug i think it might be
grab a copy of nvda 2018.2 rc2 and download it and install it to your
computer. Then while nvda is running use the nvda key + letter N to go
into the preferences of nvda then go to tools a sub menu will come off
it then locate the following menu called Run COM Registration Fixing
tool... then press the enter key.

I am not sure after that but after the process should register any
broken dlls that nvda needs to use.

let us know if it does the trick.

By the way after you press the enter key on it the menu e pointed you
towards i am not sure if there are any thing or screen after that to follow.

Gene nz

On 6/3/2018 9:30 PM, Brian's Mail list account via Groups.Io wrote:
If you can run the latest master, and the problem is what I think is
being suspected, then it has a tool that attempts to fix such problems
in windows installations.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal E-mail to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Brennen Kinch"
<brennenkinch@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Sunday, June 03, 2018 1:51 AM
Subject: Re: [nvda] browse mode


can I Skype with Eugene so we can work out some of those things I’m
not sure I could write them all down in the email
On Jun 2, 2018, at 8:49 PM, Gene New Zealand
<hurrikennyandopo@outlook.co.nz> wrote:

hi


Out of curiosity do you hear sounds or hear browse mode and focus mode
when you go between those modes?


if it is the sound one i think you hear a letter sound and when you are
out of focus mode you hear another sound.


if you want to hear them spoken have a look under the browse mode
settings and uncheck the following box called Audio indication of focus
and browse modes

then save your settings.


If you tab a couple of times do you hear unknown or pane?


Do you also hear it under say the running applications part on windows
and it is not speaking the icons down there and some other stuff like
that?


By the way which version of nvda are you running? did you download the
latest nvda 2018.2 rc2 version if so there is a tool in this version of
nvda that might fix it.


If you are not really getting that stuff then we can sus some thing else
out and maybe narrow it a little.


Gene nz



On 6/3/2018 11:50 AM, Brennen Kinch wrote:
no I’m using the full version of NVDA not any snapshots also it
looks like I am in the full webpage when I’m doing this so I’m not
sure what’s going on and it seems to be happening with all web
browsers as well
On Jun 2, 2018, at 5:06 PM, Brennen Kinch <brennenkinch@gmail.com>
wrote:

hi has anyone had any trouble with using brows mode in latest
versions of NVDA
particularly with using the shortcut keys in brows mode for example
when I press the H key for headings it says no checkboxes no edit
box no link but it doesn’t say anything about headings
I have tried uninstalling and reinstalling NVDA am resetting my
configurations of no luck can anyone please help me

Sent from my iPhone









Re: browse mode

Gene New Zealand <hurrikennyandopo@...>
 

the tool Brian is refering to if it is the same bug i think it might be
grab a copy of nvda 2018.2 rc2 and download it and install it to your
computer. Then while nvda is running use the nvda key + letter N to go
into the preferences of nvda then go to tools a sub menu will come off
it then locate the following menu called Run COM Registration Fixing
tool... then press the enter key.

I am not sure after that but after the process should register any
broken dlls that nvda needs to use.

let us know if it does the trick.

By the way after you press the enter key on it the menu e pointed you
towards i am not sure if there are any thing or screen after that to follow.

Gene nz

On 6/3/2018 9:30 PM, Brian's Mail list account via Groups.Io wrote:
If you can run the latest master, and the problem is what I think is
being suspected, then it has a tool that attempts to fix such problems
in windows installations.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal E-mail to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Brennen Kinch"
<brennenkinch@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Sunday, June 03, 2018 1:51 AM
Subject: Re: [nvda] browse mode


can I Skype with Eugene so we can work out some of those things I’m
not sure I could write them all down in the email
On Jun 2, 2018, at 8:49 PM, Gene New Zealand
<hurrikennyandopo@outlook.co.nz> wrote:

hi


Out of curiosity do you hear sounds or hear browse mode and focus mode
when you go between those modes?


if it is the sound one i think you hear a letter sound and when you are
out of focus mode you hear another sound.


if you want to hear them spoken have a look under the browse mode
settings and uncheck the following box called Audio indication of focus
and browse modes

then save your settings.


If you tab a couple of times do you hear unknown or pane?


Do you also hear it under say the running applications part on windows
and it is not speaking the icons down there and some other stuff like
that?


By the way which version of nvda are you running? did you download the
latest nvda 2018.2 rc2 version if so there is a tool in this version of
nvda that might fix it.


If you are not really getting that stuff then we can sus some thing else
out and maybe narrow it a little.


Gene nz



On 6/3/2018 11:50 AM, Brennen Kinch wrote:
no I’m using the full version of NVDA not any snapshots also it
looks like I am in the full webpage when I’m doing this so I’m not
sure what’s going on and it seems to be happening with all web
browsers as well
On Jun 2, 2018, at 5:06 PM, Brennen Kinch <brennenkinch@gmail.com>
wrote:

hi has anyone had any trouble with using brows mode in latest
versions of NVDA
particularly with using the shortcut keys in brows mode for example
when I press the H key for headings it says no checkboxes no edit
box no link but it doesn’t say anything about headings
I have tried uninstalling and reinstalling NVDA am resetting my
configurations of no luck can anyone please help me

Sent from my iPhone







Re: "Unofficial" NVDA Add-Ons Repository

mattias
 

What about jefs nvda addon repository?

 

Skickades från E-post för Windows 10

 

Från: Lanie Molinar
Skickat: den 3 juni 2018 17:17
Till: nvda@nvda.groups.io
Ämne: Re: [nvda] "Unofficial" NVDA Add-Ons Repository

 

Hi. Try 'Jeff's NVDA Add-on Repository'.

 

On 6/3/2018 10:08 AM, Brian Vogel wrote:

Hello All,

           I am very well aware of the official website for vetted NVDA Add-Ons at https://addons.nvda-project.org/index.en.html, and have directed a lot of people there to snag the various scripts that might prove useful to them.

           However, there have got to be untold numbers of "unvetted" add-ons out there that people have created for more obscure programs, old programs, or stuff I can't even conceive of as a non-screen-reader user that exist out there that others might find handy that, as far as I know, there is no mechanism to share.

           Am I correct or am I wallowing in the darkness of ignorance of same?

           If there isn't such, does interest exist in creating one?   Any add-ons that would exist in such a repository would, of course, be used "at your own risk" but I doubt that there's a cadre of NVDA add-on writers out there creating malware add-ons to decimate the user community.

           If such a locale already exists then I'd love to know where it is.

--

Brian - Windows 10 Home, 64-Bit, Version 1803, Build 17134  

     Explanations exist; they have existed for all time; there is always a well-known solution to every human problem — neat, plausible, and wrong.

          ~ H.L. Mencken, AKA The Sage of Baltimore

 

 

 


Re: reading very big texts in command-line applications, for example sdkmanager #addonrelease #addonrelesae

Jackie
 

Even if you don't, it works well because it's hard to review something
once you've pressed the 'more' key again.

On 6/3/18, JM Casey <crystallogic@ca.inter.net> wrote:
Yes, this also works great, and very handy if you want to keep info around.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jackie
Sent: June 3, 2018 12:48 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] reading very big texts in command-line applications, for
example sdkmanager #addonrelease #addonrelease #addonrelesae

Another thing I often do is pipe the text to a file, like:
netstat /B > connections.txt

Then I can just open connections.txt in my favorite text editor & look to my
heart's content.

On 6/3/18, JM Casey <crystallogic@ca.inter.net> wrote:
Since you mentioned that the text is “very big”, it sounds like maybe
it’s scrolling off the screen. This isn’t anything to do with NVDA,
but it should make it easier to review a long stream of command line
output. Type in your command string and append “|more”, to it, without
quotes, but including the vertical bar | symbol. When text reaches the
bottom of the screen you will see a prompt to press a key, which
causes the text to scroll forward another screen. This will keep happening
until the command output has finished.







From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Vova Mobile
Sent: June 3, 2018 11:05 AM
To: nvda@nvda.groups.io
Subject: [nvda] reading very big texts in command-line applications,
for example sdkmanager #addonrelease #addonrelease #addonrelesae



Hi all! Advise, please, how to read very long information messages in
applications of a command line tools with NVDA? For example, in
dialogues of SDKManager. Simple commands text viewing allow to read
only a small part of long dialogues. Objects navigation commands and
commands of review cursor also not worked.
Therefore i can't check the list of available addons to install in
command-line tools "sdkmanager" - list addons is very big.




--
Remember! Friends Help Friends Be Cybersafe Jackie McBride Helping
Cybercrime Victims 1 Person at a Time https://brighter-vision.com






--
Remember! Friends Help Friends Be Cybersafe
Jackie McBride
Helping Cybercrime Victims 1 Person at a Time
https://brighter-vision.com


Re: reading very big texts in command-line applications, for example sdkmanager #addonrelease #addonrelesae

JM Casey <crystallogic@...>
 

Yes, this also works great, and very handy if you want to keep info around.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jackie
Sent: June 3, 2018 12:48 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] reading very big texts in command-line applications, for example sdkmanager #addonrelease #addonrelease #addonrelesae

Another thing I often do is pipe the text to a file, like:
netstat /B > connections.txt

Then I can just open connections.txt in my favorite text editor & look to my heart's content.

On 6/3/18, JM Casey <crystallogic@ca.inter.net> wrote:
Since you mentioned that the text is “very big”, it sounds like maybe
it’s scrolling off the screen. This isn’t anything to do with NVDA,
but it should make it easier to review a long stream of command line
output. Type in your command string and append “|more”, to it, without
quotes, but including the vertical bar | symbol. When text reaches the
bottom of the screen you will see a prompt to press a key, which
causes the text to scroll forward another screen. This will keep happening until the command output has finished.







From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Vova Mobile
Sent: June 3, 2018 11:05 AM
To: nvda@nvda.groups.io
Subject: [nvda] reading very big texts in command-line applications,
for example sdkmanager #addonrelease #addonrelease #addonrelesae



Hi all! Advise, please, how to read very long information messages in
applications of a command line tools with NVDA? For example, in
dialogues of SDKManager. Simple commands text viewing allow to read
only a small part of long dialogues. Objects navigation commands and
commands of review cursor also not worked.
Therefore i can't check the list of available addons to install in
command-line tools "sdkmanager" - list addons is very big.




--
Remember! Friends Help Friends Be Cybersafe Jackie McBride Helping Cybercrime Victims 1 Person at a Time https://brighter-vision.com


Re: reading very big texts in command-line applications, for example sdkmanager #addonrelease #addonrelesae

Jackie
 

Another thing I often do is pipe the text to a file, like:
netstat /B > connections.txt

Then I can just open connections.txt in my favorite text editor & look
to my heart's content.

On 6/3/18, JM Casey <crystallogic@ca.inter.net> wrote:
Since you mentioned that the text is “very big”, it sounds like maybe it’s
scrolling off the screen. This isn’t anything to do with NVDA, but it should
make it easier to review a long stream of command line output. Type in your
command string and append “|more”, to it, without quotes, but including the
vertical bar | symbol. When text reaches the bottom of the screen you will
see a prompt to press a key, which causes the text to scroll forward another
screen. This will keep happening until the command output has finished.







From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Vova
Mobile
Sent: June 3, 2018 11:05 AM
To: nvda@nvda.groups.io
Subject: [nvda] reading very big texts in command-line applications, for
example sdkmanager #addonrelease #addonrelease #addonrelesae



Hi all! Advise, please, how to read very long information messages in
applications of a command line tools with NVDA? For example, in dialogues of
SDKManager. Simple commands text viewing allow to read only a small part of
long dialogues. Objects navigation commands and commands of review cursor
also not worked.
Therefore i can't check the list of available addons to install in
command-line tools "sdkmanager" - list addons is very big.



--
Remember! Friends Help Friends Be Cybersafe
Jackie McBride
Helping Cybercrime Victims 1 Person at a Time
https://brighter-vision.com


Re: reading very big texts in command-line applications, for example sdkmanager #addonrelease #addonrelesae

JM Casey <crystallogic@...>
 

Since you mentioned that the text is “very big”, it sounds like maybe it’s scrolling off the screen. This isn’t anything to do with NVDA, but it should make it easier to review a long stream of command line output. Type in your command string and append “|more”, to it, without quotes, but including the vertical bar | symbol. When text reaches the bottom of the screen you will see a prompt to press a key, which causes the text to scroll forward another screen. This will keep happening until the command output has finished.

 

 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Vova Mobile
Sent: June 3, 2018 11:05 AM
To: nvda@nvda.groups.io
Subject: [nvda] reading very big texts in command-line applications, for example sdkmanager #addonrelease #addonrelease #addonrelesae

 

Hi all! Advise, please, how to read very long information messages in applications of a command line tools with NVDA? For example, in dialogues of SDKManager. Simple commands text viewing allow to read only a small part of long dialogues. Objects navigation commands and commands of review cursor also not worked.
Therefore i can't check the list of available addons to install in command-line tools "sdkmanager" - list addons is very big.


Re: reading very big texts in command-line applications, for example sdkmanager #addonrelease #addonrelesae

Gene
 

In object navigation, use the commands for moving in the current object, numpad 8 for the current line, 7 for previous line and 9 for next line
4 5 6, previous word, 5 current word and six next word.
The same pattern for character with numpad 1 2 and 3.
 
If you have tried this and it doesn't work or you do now and it doesn't work, let us know.
 
I am giving commands for the desktop layout.  I don't know the laptop layout.

Sent: Sunday, June 03, 2018 10:05 AM
Subject: [nvda] reading very big texts in command-line applications, for example sdkmanager #addonrelease #addonrelease #addonrelesae

Hi all! Advise, please, how to read very long information messages in applications of a command line tools with NVDA? For example, in dialogues of SDKManager. Simple commands text viewing allow to read only a small part of long dialogues. Objects navigation commands and commands of review cursor also not worked.
Therefore i can't check the list of available addons to install in command-line tools "sdkmanager" - list addons is very big.


reading very big texts in command-line applications, for example sdkmanager #addonrelease #addonrelesae

Vova Mobile
 

Hi all! Advise, please, how to read very long information messages in applications of a command line tools with NVDA? For example, in dialogues of SDKManager. Simple commands text viewing allow to read only a small part of long dialogues. Objects navigation commands and commands of review cursor also not worked.
Therefore i can't check the list of available addons to install in command-line tools "sdkmanager" - list addons is very big.