Date   

Following someone on TWBlue

John J. Boyer
 

I want to follow the Wall Street Journal. i tried the Seaech option on the menu, but that doesn't seem to do anyghing.

Thanks,
John

--
John J. Boyer
Email: john.boyer@...
website: http://www.abilitiessoft.org
Status: Company dissolved but website and email addresses live.
Location: Madison, Wisconsin, USA
Mission: developing assistive technology software and providing STEM services
that are available at no cost


Re: default dictionaries

Gene
 

Since dictionary entries take up almost no room, the dictionary in the below message would be, I would think, very large.  I don't think there is any need for concern even with a dictionary consisting of hundreds or maybe over a thousand, maybe more, words.


Gene

On 2/21/2022 12:04 AM, Quentin Christensen wrote:
I must admit I'm not sure either but I tend to run a very bare version of NVDA personally.  Ok, who has the largest dictionary who can answer this question?

On Sun, Feb 20, 2022 at 1:31 AM Jason Bratcher <imcoocoo@...> wrote:
No it does not.
I've got a fairly large (about 8.00 KB (8,192 bytes).
No slow-down here.

--
Jason Bratcher








--
Quentin Christensen
Training and Support Manager


Re: default dictionaries

Gene
 

Since dictionary entries take up almost no room, the dictionary in the below message would be, I would think, very large.  I don't think there is any need for concern even with a dictionary consisting of hundreds or maybe over a thousand, maybe more, words.


Gene

On 2/21/2022 12:04 AM, Quentin Christensen wrote:
I must admit I'm not sure either but I tend to run a very bare version of NVDA personally.  Ok, who has the largest dictionary who can answer this question?

On Sun, Feb 20, 2022 at 1:31 AM Jason Bratcher <imcoocoo@...> wrote:
No it does not.
I've got a fairly large (about 8.00 KB (8,192 bytes).
No slow-down here.

--
Jason Bratcher








--
Quentin Christensen
Training and Support Manager


Re: default dictionaries

Quentin Christensen
 

I must admit I'm not sure either but I tend to run a very bare version of NVDA personally.  Ok, who has the largest dictionary who can answer this question?


On Sun, Feb 20, 2022 at 1:31 AM Jason Bratcher <imcoocoo@...> wrote:
No it does not.
I've got a fairly large (about 8.00 KB (8,192 bytes).
No slow-down here.

--
Jason Bratcher








--
Quentin Christensen
Training and Support Manager


Re: Sound Splitter 22.02.1 (emergency) update #addonrelease

 

Hello everyone,

If you happen to be using Add-on Updater, Sound Splitter 22.02.1 is now available.

Cheers,

Joseph


Re: removing code factory voices

 

Well if its in nvda you just go nvda menu which is nvda n tools, manage addons.
Highlight the addon you want to clobber, hit uninstall or remove I
forget what because I hardly do it.
restart once you have killed everything you don't want.
Vocaliser can be removed for sapi by going to the vocaliser launcher
called vocaliser.
In the list of voices the installed stuff is first then highlight each
voice you have and hit uninstall and then ok and once its all gone and
there are no voices with uninstall control tab to activation and hit
deactivate.
Then hit ok.
Finally in the control panel or settings add remove features or
programs or whatever it is called now because I forget you can just
uninstall vocaliser.
You kmay even be able to uninstall it from its program group.

On 21/02/2022, Gene <gsasner@...> wrote:
Here is how you remove the program and the voices.  First, here is my
opinion on removing programs.  I just leave them.  They do nothing and
they aren't in the way in any sense that matters.  You never know when,
even if it is a small chance, removing something will cause problems
because of a faulty removal or because the program wasn't designed
properly as far as removal.  If I installed a lot of programs for
trying, I might remove them more often but I install very little other
than what I want.  I try a program off and on but programs usually take
so little disk space that I often leave them.


Here is how you remove the program and the voices.  I've done this in
Windows 7 but it should be the same except perhaps for any changes in
add/remove programs interface.  The removal of voices should be the same.


looking in Programs and features, you can remove the actual software,
not the voices in that list.  Here is an entry I found. Code Factory -
Vocalizer for Windows - SAPI-compliant Text-to-Speech Engine for the
Windows Platform.  Don't remove it yet.  You may not have access to the
dialog I will describe if you do.  If you have removed the actual
program and the dialog is no longer present, reinstall it.


New main steps for these instructions start on new lines.


To remove the voices, go to the desktop.

Find Vocalizer  and press enter.

A dialog will come up.  Press the buy on line button.  The other button
won't do what you want.

The default browser will open and display a page for purchasing
software.  Close the browser.

You are now in a dialog for working with the voices and the program.  If
you aren't, alt tab to it.

You are in a list of voices.  Find an installed voice.  Tab perhaps
twice to an uninstall button.  Press the space bar.

Do anything else appropriate the dialog may ask.


The voice will be removed.


Gene

On 2/20/2022 5:05 PM, brice Mijares wrote:
I can not figure out how to remove code factory and the vocalizer
voices. Googling it, gave me no instructions. Did not find it in add
and remove. Any suggestions? Thanks.






.





Re: removing code factory voices

Gene
 

Here is how you remove the program and the voices.  First, here is my opinion on removing programs.  I just leave them.  They do nothing and they aren't in the way in any sense that matters.  You never know when, even if it is a small chance, removing something will cause problems because of a faulty removal or because the program wasn't designed properly as far as removal.  If I installed a lot of programs for trying, I might remove them more often but I install very little other than what I want.  I try a program off and on but programs usually take so little disk space that I often leave them.


Here is how you remove the program and the voices.  I've done this in Windows 7 but it should be the same except perhaps for any changes in add/remove programs interface.  The removal of voices should be the same.


looking in Programs and features, you can remove the actual software, not the voices in that list.  Here is an entry I found. Code Factory - Vocalizer for Windows - SAPI-compliant Text-to-Speech Engine for the Windows Platform.  Don't remove it yet.  You may not have access to the dialog I will describe if you do.  If you have removed the actual program and the dialog is no longer present, reinstall it.


New main steps for these instructions start on new lines.


To remove the voices, go to the desktop.

Find Vocalizer  and press enter.

A dialog will come up.  Press the buy on line button.  The other button won't do what you want.

The default browser will open and display a page for purchasing software.  Close the browser.

You are now in a dialog for working with the voices and the program.  If you aren't, alt tab to it.

You are in a list of voices.  Find an installed voice.  Tab perhaps twice to an uninstall button.  Press the space bar.

Do anything else appropriate the dialog may ask.


The voice will be removed.


Gene

On 2/20/2022 5:05 PM, brice Mijares wrote:
I can not figure out how to remove code factory and the vocalizer voices. Googling it, gave me no instructions. Did not find it in add and remove. Any suggestions? Thanks.





.


Re: removing code factory voices

brice Mijares
 

Okay, thanks for the info.

On 2/20/2022 3:18 PM, Jacob wrote:
IF it's SAPI5 you'll find them in Add/Remove but if it's Add-Ons you'll find them in the NVDA menu under Tools and Manage Add-Ons.


OZ0TE Jacob


On 2022-02-21 at 00:05 brice Mijares wrote:
I can not figure out how to remove code factory and the vocalizer voices. Googling it, gave me no instructions. Did not find it in add and remove. Any suggestions? Thanks.








Re: removing code factory voices

Jacob
 

IF it's SAPI5 you'll find them in Add/Remove but if it's Add-Ons you'll find them in the NVDA menu under Tools and Manage Add-Ons.


OZ0TE Jacob

On 2022-02-21 at 00:05 brice Mijares wrote:
I can not figure out how to remove code factory and the vocalizer voices. Googling it, gave me no instructions. Did not find it in add and remove. Any suggestions? Thanks.





removing code factory voices

brice Mijares
 

I can not figure out how to remove code factory and the vocalizer voices. Googling it, gave me no instructions. Did not find it in add and remove. Any suggestions? Thanks.


Re: problem with echo wile typing in a specific program

Daniel Sommerfeld
 

Hi Rui.

It is the flight simulator Eurofly. I am having this program for about 3 weeks now and until yesterday everything worked just fine. I really don't know, what should be different now. There was no update or anything like that.


Regards

Daniel

Am 20.02.2022 um 16:40 schrieb Rui Fontes:

Wich program?

It can be a program problem and not a NVDA problem...


Rui Fontes


Às 15:02 de 20/02/2022, Daniel Sommerfeld escreveu:

Hi,

i checked everything. i even made a reset of NVDA and checked the folders, if there are any profiles. But nothing. And the problem is still there. But as i said, only in that program. I really don't know why.


Regards

Daniel

Am 20.02.2022 um 13:43 schrieb Brian Vogel:
It sounds to me like you've accidentally created a configuration profile for that application.  Hit NVDA + N, H, U to bring up the User Guide and take a look at the section on configuration profiles.
--

Brian - Windows 10, 64-Bit, Version 21H2, Build 19044  

Constantly insisting on “my rights” with no consideration of “my responsibilities” isn’t “freedom” — it’s adolescence.
     ~ Commenter, Evangelos, in comments for
         America 2022: Where Everyone Has Rights and No One Has Responsibilities,
        New York Times, February 8, 2022

 


Re: My New Book Now Available for Download

Rosemarie Chavarria
 

Hi,

 

I had that same problem on Friday when I tried to fill out the form but I tried later that evening and it worked. I was able to fill out the form with no problem.

 

Rosemarie

 

 

Sent from Mail for Windows

 

From: coscell@...
Sent: Sunday, February 20, 2022 7:09 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] My New Book Now Available for Download

 

I couldn't submit the form.

There was an error trying to send your message. Please try again later.

 

On Thu, 17 Feb 2022, Joseph Lee wrote:

 

>

> Hi David,

>

> Congratulations on the new book. I have informed the admin of WinAccess forum if it is okay to share the book info on that list.

>

> Cheers,

>

> Joseph

>

>

>

 

 

 

 

 


Re: problem with echo wile typing in a specific program

Rui Fontes
 

Wich program?

It can be a program problem and not a NVDA problem...


Rui Fontes


Às 15:02 de 20/02/2022, Daniel Sommerfeld escreveu:

Hi,

i checked everything. i even made a reset of NVDA and checked the folders, if there are any profiles. But nothing. And the problem is still there. But as i said, only in that program. I really don't know why.


Regards

Daniel

Am 20.02.2022 um 13:43 schrieb Brian Vogel:
It sounds to me like you've accidentally created a configuration profile for that application.  Hit NVDA + N, H, U to bring up the User Guide and take a look at the section on configuration profiles.
--

Brian - Windows 10, 64-Bit, Version 21H2, Build 19044  

Constantly insisting on “my rights” with no consideration of “my responsibilities” isn’t “freedom” — it’s adolescence.
     ~ Commenter, Evangelos, in comments for
         America 2022: Where Everyone Has Rights and No One Has Responsibilities,
        New York Times, February 8, 2022

 


Re: My New Book Now Available for Download

coscell@...
 

I couldn't submit the form.
There was an error trying to send your message. Please try again later.

On Thu, 17 Feb 2022, Joseph Lee wrote:

Hi David,
Congratulations on the new book. I have informed the admin of WinAccess forum if it is okay to share the book info on that list.
Cheers,
Joseph


Re: problem with echo wile typing in a specific program

Daniel Sommerfeld
 

Hi,

i checked everything. i even made a reset of NVDA and checked the folders, if there are any profiles. But nothing. And the problem is still there. But as i said, only in that program. I really don't know why.


Regards

Daniel

Am 20.02.2022 um 13:43 schrieb Brian Vogel:

It sounds to me like you've accidentally created a configuration profile for that application.  Hit NVDA + N, H, U to bring up the User Guide and take a look at the section on configuration profiles.
--

Brian - Windows 10, 64-Bit, Version 21H2, Build 19044  

Constantly insisting on “my rights” with no consideration of “my responsibilities” isn’t “freedom” — it’s adolescence.
     ~ Commenter, Evangelos, in comments for
         America 2022: Where Everyone Has Rights and No One Has Responsibilities,
        New York Times, February 8, 2022

 


Re: Silence Using the Remote Add-on

Chris Mullins
 

                Hi

I have just successfully connected via the Remote add-on to my old laptop upstairs.  I have the most up-to-date copies of the addon, NVDA  and W10 on this machine but my old laptop has Windows XP on it so NVDA and the add-on are old versions.

 

For a successful connection using a relay server, Connection dialog controls should be set as follows:

 

1st control should be set to “Client” on both computers.

 

2nd control must be set to either “Controlling” or Controlled”.  If both computers have the same setting, you will get silence.

    

Host: should be identical on both computers I.E. nvdaremote.com

 

Key: should be identical on both computers.

 

F11 toggle only works on the Controlling computer. 

 

Cheers

                Chris

 

 

 

Sent from Mail for Windows

 

From: mattias
Sent: 20 February 2022 10:25
To: nvda@nvda.groups.io
Subject: Re: [nvda] Silence Using the Remote Add-on

 

i have never got the addon to work either

 

Den 2022-02-20 kl. 00:47, skrev Jackie:

> Does your person use speech?

> On 2/19/22, Rich DeSteno <axcruncher@...> wrote:

>> I tried the NVDA remote add-on today for the first time.  I and the

>> person I was attempting to assist were using the current version of NVDA

>> and the current remote add-on.  I was successful in making the

>> connection, we got the beep and the F11 key toggled between remote and

>> local.  The problem was that I got complete silence when I was in

>> "remote" mode.  My speech synthesizer went completely mute.  I use the

>> OneCore voice Mark.  Obviously, this made the session a complete bust.

>> Does anyone know why this would happen and what the solution is?

>> 

>> 

>> 

>> --

>> Rich De Steno

>> 

>> 

>> 

>> 

>> 

>> 

>> 

 

 

 

 

 


Re: problem with echo wile typing in a specific program

 

It sounds to me like you've accidentally created a configuration profile for that application.  Hit NVDA + N, H, U to bring up the User Guide and take a look at the section on configuration profiles.
--

Brian - Windows 10, 64-Bit, Version 21H2, Build 19044  

Constantly insisting on “my rights” with no consideration of “my responsibilities” isn’t “freedom” — it’s adolescence.
     ~ Commenter, Evangelos, in comments for
         America 2022: Where Everyone Has Rights and No One Has Responsibilities,
        New York Times, February 8, 2022

 


problem with echo wile typing in a specific program

Daniel Sommerfeld
 

Hi all.


First of all, my name is Daniel and i am new to the group. I am from Hamburg in germany.


But now to my problem.


I must have done something, i can not reproduce. The problem is, that i am getting an echo of every letter or number i am entering but only in one program. All other programs are not affected. I went through different settings but could not solve the issue.


Can anyone help?


Regards


daniel


Re: Silence Using the Remote Add-on

mattias
 

i have never got the addon to work either

Den 2022-02-20 kl. 00:47, skrev Jackie:

Does your person use speech?

On 2/19/22, Rich DeSteno <axcruncher@...> wrote:
I tried the NVDA remote add-on today for the first time.  I and the
person I was attempting to assist were using the current version of NVDA
and the current remote add-on.  I was successful in making the
connection, we got the beep and the F11 key toggled between remote and
local.  The problem was that I got complete silence when I was in
"remote" mode.  My speech synthesizer went completely mute.  I use the
OneCore voice Mark.  Obviously, this made the session a complete bust.
Does anyone know why this would happen and what the solution is?



--
Rich De Steno







Re: goldenCursor

Rowen Cary
 

Hi, Adding the ability to scroll the mouse wheel for the golden cursor would also be useful I believe. Thanks

6681 - 6700 of 99646