Date   

Re: Eloquence delay after launching NVDA.

David Griffith
 

I am sorry you have problems with Jaws also. Jaws 18 is fine for me at this end.

 

There is a known issue with Code Factory Eloquence  with NVDA.

I have seen several complaints from NVDA users on other lists than this which complain of the extreme delay with NVDA loading with Code Factory Eloquence. This caused some to recommend using the illegal NVDA Eloquence addon  as an alternative which drew an angry response from the person retailing Code Factory Eloquence in this country.

 

If was from this person retailing the Code Factory product in this country that I learnt the tip of amending sound properties in the Control Panel  as a partial  solution to the slow loading. He in turn had got this advice from Code Factry as I understand it.

 

Presumably as not all people have the same configurations in their Sound Control Panel applet  the  experience of people experiencing this delay may well vary.

 

David Griffith

 

Sent from Mail for Windows 10

 

From: matthew dyer
Sent: 12 March 2017 18:27
To: nvda@nvda.groups.io
Subject: Re: [nvda] Eloquence delay after launching NVDA.

 

Hi,

 

Using jfw 18 with elequence, I have this problem sop I don't think this is an NVDA problem.  JMT.

 

Matthew

 

 

 

On 03/12/2017 06:42 AM, David Griffith wrote:

 

Yes I have had this issue of extreme delayed start up along with the additional issue of NVDA and eloquence freezing in large  File Explorer windows.

 

This does not happen with the  illegal versions of Eloquence which is disappointing from a a Code Factory quality point of view.

 

I managed to improve matters  to some degree by going into the Sound Properties in Windows Control Panel, selecting my default sound device and turning off all the fancy affects like surround sound and just selecting just basic stereo as my output format.

 

This has had the affect of slightly diminishing the funkier music output from my PC but I am not now waiting upt to a minute  or more for NVDA to load.

 

I still get the problem of NVDA not responding with large file explorer windows  but what I have learnt is that if you turn Narrator on with Windows Enter temporarily you can navigate your file lists fine until NVDA wakes up and starts responding again. I just turn Narrator off when NVDA finally catches up.

 

David Griffith

 

 

 

Sent from Mail for Windows 10

 

From: Darrell Shandrow Hilliker
Sent: 12 March 2017 10:16
To: nvda@nvda.groups.io
Subject: [nvda] Eloquence delay after launching NVDA.

 

Hello Everyone,

 

I am experiencing a significant delay after launching NVDA with Code Factory’s Eloquence implementation selected as the speech synthesizer.

 

I am running on Windows 10.

 

Does anyone else experience this issue and, if so, what steps have resolved this issue?

 

Thanks,

 

Darrell

 

 

 

 


Re: Eloquence delay after launching NVDA.

Arlene
 

Oh! do you think it’s a synth problem? That eloquence is used in NVDA and Jaws. 

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of matthew dyer
Sent: March-12-17 11:27 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Eloquence delay after launching NVDA.

 

Hi,

 

Using jfw 18 with elequence, I have this problem sop I don't think this is an NVDA problem.  JMT.

 

Matthew

 

 

 

On 03/12/2017 06:42 AM, David Griffith wrote:

 

Yes I have had this issue of extreme delayed start up along with the additional issue of NVDA and eloquence freezing in large  File Explorer windows.

 

This does not happen with the  illegal versions of Eloquence which is disappointing from a a Code Factory quality point of view.

 

I managed to improve matters  to some degree by going into the Sound Properties in Windows Control Panel, selecting my default sound device and turning off all the fancy affects like surround sound and just selecting just basic stereo as my output format.

 

This has had the affect of slightly diminishing the funkier music output from my PC but I am not now waiting upt to a minute  or more for NVDA to load.

 

I still get the problem of NVDA not responding with large file explorer windows  but what I have learnt is that if you turn Narrator on with Windows Enter temporarily you can navigate your file lists fine until NVDA wakes up and starts responding again. I just turn Narrator off when NVDA finally catches up.

 

David Griffith

 

 

 

Sent from Mail for Windows 10

 

From: Darrell Shandrow Hilliker
Sent: 12 March 2017 10:16
To: nvda@nvda.groups.io
Subject: [nvda] Eloquence delay after launching NVDA.

 

Hello Everyone,

 

I am experiencing a significant delay after launching NVDA with Code Factory’s Eloquence implementation selected as the speech synthesizer.

 

I am running on Windows 10.

 

Does anyone else experience this issue and, if so, what steps have resolved this issue?

 

Thanks,

 

Darrell

 

 

 


Re: Eloquence delay after launching NVDA.

matthew dyer
 

Hi,


Using jfw 18 with elequence, I have this problem sop I don't think this is an NVDA problem.  JMT.


Matthew




On 03/12/2017 06:42 AM, David Griffith wrote:

 

Yes I have had this issue of extreme delayed start up along with the additional issue of NVDA and eloquence freezing in large  File Explorer windows.

 

This does not happen with the  illegal versions of Eloquence which is disappointing from a a Code Factory quality point of view.

 

I managed to improve matters  to some degree by going into the Sound Properties in Windows Control Panel, selecting my default sound device and turning off all the fancy affects like surround sound and just selecting just basic stereo as my output format.

 

This has had the affect of slightly diminishing the funkier music output from my PC but I am not now waiting upt to a minute  or more for NVDA to load.

 

I still get the problem of NVDA not responding with large file explorer windows  but what I have learnt is that if you turn Narrator on with Windows Enter temporarily you can navigate your file lists fine until NVDA wakes up and starts responding again. I just turn Narrator off when NVDA finally catches up.

 

David Griffith

 

 

 

Sent from Mail for Windows 10

 

From: Darrell Shandrow Hilliker
Sent: 12 March 2017 10:16
To: nvda@nvda.groups.io
Subject: [nvda] Eloquence delay after launching NVDA.

 

Hello Everyone,

 

I am experiencing a significant delay after launching NVDA with Code Factory’s Eloquence implementation selected as the speech synthesizer.

 

I am running on Windows 10.

 

Does anyone else experience this issue and, if so, what steps have resolved this issue?

 

Thanks,

 

Darrell

 

 



Re: Your ChangeAlert for www.yourdomain.com

Sam Bushman
 

I just discovered something interesting. The message starts with browse mode off, if I press NVDA-space it turns browse mode on and the message works. So, for some reason the message doesn’t turn browse mode on like it should.

 

Is there a way to search in a message in outlook like NVDA-ctrl-f does on a web page?

Thanks,

Sam

 

Sam Bushman

LibertyRoundTable.com

801-756-9133

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Sunday, March 12, 2017 11:33 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

 

I don't know how you might do it.  As I said, you need to forward it to yourself so that you can see what happens without it being sent to the list. 

 

Gene

----- Original Message -----

Sent: Sunday, March 12, 2017 12:25 PM

Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

 

Hi Gene,

 

Great point, I can read the message that came from the list just fine. That is the same as a forward.

We now need to see how I can get the message to others to test in its original state.

Any ideas?

 

Thanks,

 

Sam Bushman

LibertyRoundTable.com

801-756-9133

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Sunday, March 12, 2017 11:16 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

 

Also, I don't think forwarding the message would change it but I would suggest forwarding it to yourself.  We need to rule out the possibility that the original doesn't read properly in your program using NVDA but the forward may for some reason.  there are too many unknown variables to draw even tentative conclusions now.

 

Gene

----- Original Message -----

Sent: Sunday, March 12, 2017 11:46 AM

Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

 

Hi Jene,

 

I can read it in other ways. I can read it just fine in Window Eyes. Because of my email others have now confirmed they can read it in thunderbird.

I don’t want to change to text email because then links and other formatting become broken when we do that.

Meaning it stripps photos etc. if you forward those emails to others you have completely destroyed the look/feel of a message.

 

My main goal is to provide duplicatable results that might help improve NVDA’s ability to deal with such content.

 

Thanks,

Sam

 

Sam Bushman

LibertyRoundTable.com

801-756-9133

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Sunday, March 12, 2017 10:42 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

 

Yes.  Try reading it in other ways.  I don't use Outlook but as I recall, there is an option to read the message in a browser.  You may also be reading mail as html.  If you change to read messages in plain text, you may be able to read it.  I don't know if this is still the case, but for quite some time, some html messages weren't read correctly in Outlook for technical reasons. 

 

Gene

----- Original Message -----

Sent: Sunday, March 12, 2017 11:00 AM

Subject: [nvda] Your ChangeAlert for www.yourdomain.com

 

Hi All,

 

Can you read the below message with ease?

I can’t read it in outlook live 365 for business …

 

Thanks for checking on this for me.

 

 

From: CodeGuard Team [mailto:notifications@...]
Sent: Sunday, March 12, 2017 1:08 AM
Subject: Your ChangeAlert for www.tetonsports.com

 

Logo

ChangeAlert Summary

Below are changes we detected for www.tetonsports.com on Sunday, March 12, 2017. Full reports can be found in your dashboard.

Backup Total

Total Files Added

Total Files Changed

Total Files Deleted

1

1677

0

Overview

Static Files: 540 total file additions, changes, and deletions

File Type

Additions

Changes

Deletions

.html

0

1

0

.css

0

203

0

.js

0

335

0

.htaccess

0

1

0

Dynamic Files: 702 total file additions, changes, and deletions

File Type

Additions

Changes

Deletions

.php

0

702

0

.rb

0

0

0

.asp

0

0

0

.jsp

0

0

0

Website Files

Below are your website files that were added, changed, or deleted in this backup. Website files include .html, .css, .php, .js, .rb, .asp, .jsp, and .htaccess files types.

Website Files Added

There were no added website files in this backup.

Website Files Changed

When a file addition, modification or deletion is detected, you can tell us whether this was an expected change () or the change was suspicious (). This feedback is added to our malware engine for deeper analysis. Your participation may help discover new infections, vulnerabilities and zero-day attacks that impact your websites as well as others protected by this service.

  1. /httpdocs/hikerchat/index.php Report Positive ChangeReport Negative Change
  2. /httpdocs/hikerchat/readme.html Report Positive ChangeReport Negative Change
  3. /httpdocs/hikerchat/wp-activate.php Report Positive ChangeReport Negative Change
  4. /httpdocs/hikerchat/wp-admin/about.php Report Positive ChangeReport Negative Change
  5. /httpdocs/hikerchat/wp-admin/admin-ajax.php Report Positive ChangeReport Negative Change
  6. /httpdocs/hikerchat/wp-admin/admin-footer.php Report Positive ChangeReport Negative Change
  7. /httpdocs/hikerchat/wp-admin/admin-functions.php Report Positive ChangeReport Negative Change
  8. /httpdocs/hikerchat/wp-admin/admin-header.php Report Positive ChangeReport Negative Change
  9. /httpdocs/hikerchat/wp-admin/admin-post.php Report Positive ChangeReport Negative Change
  10. /httpdocs/hikerchat/wp-admin/admin.php Report Positive ChangeReport Negative Change
  11. and 1232 more

 

Website Files Deleted

There were no deleted website files in this backup.

Media Files and Other

These file types can include .png, .jpeg, .gif, .avi, .mp4 and many more. The numbers represent the total number of added, changed, or modified files for these categories. Constantly changing files like log, tmp, and cache files are included in Other.

File Type

Additions

Changes

Deletions

Images

0

184

0

Videos

0

4

0

Other

1

247

0

Full reports can be found in your dashboard.


Re: Your ChangeAlert for www.yourdomain.com

Gene
 

I don't know how you might do it.  As I said, you need to forward it to yourself so that you can see what happens without it being sent to the list. 
 
Gene

----- Original Message -----
Sent: Sunday, March 12, 2017 12:25 PM
Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

Hi Gene,

 

Great point, I can read the message that came from the list just fine. That is the same as a forward.

We now need to see how I can get the message to others to test in its original state.

Any ideas?

 

Thanks,

 

Sam Bushman

LibertyRoundTable.com

801-756-9133

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Sunday, March 12, 2017 11:16 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

 

Also, I don't think forwarding the message would change it but I would suggest forwarding it to yourself.  We need to rule out the possibility that the original doesn't read properly in your program using NVDA but the forward may for some reason.  there are too many unknown variables to draw even tentative conclusions now.

 

Gene

----- Original Message -----

From: Sam Bushman

Sent: Sunday, March 12, 2017 11:46 AM

Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

 

Hi Jene,

 

I can read it in other ways. I can read it just fine in Window Eyes. Because of my email others have now confirmed they can read it in thunderbird.

I don’t want to change to text email because then links and other formatting become broken when we do that.

Meaning it stripps photos etc. if you forward those emails to others you have completely destroyed the look/feel of a message.

 

My main goal is to provide duplicatable results that might help improve NVDA’s ability to deal with such content.

 

Thanks,

Sam

 

Sam Bushman

LibertyRoundTable.com

801-756-9133

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Sunday, March 12, 2017 10:42 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

 

Yes.  Try reading it in other ways.  I don't use Outlook but as I recall, there is an option to read the message in a browser.  You may also be reading mail as html.  If you change to read messages in plain text, you may be able to read it.  I don't know if this is still the case, but for quite some time, some html messages weren't read correctly in Outlook for technical reasons. 

 

Gene

----- Original Message -----

From: Sam Bushman

Sent: Sunday, March 12, 2017 11:00 AM

Subject: [nvda] Your ChangeAlert for www.yourdomain.com

 

Hi All,

 

Can you read the below message with ease?

I can’t read it in outlook live 365 for business …

 

Thanks for checking on this for me.

 

 

From: CodeGuard Team [mailto:notifications@...]
Sent: Sunday, March 12, 2017 1:08 AM
Subject: Your ChangeAlert for www.tetonsports.com

 

Logo

ChangeAlert Summary

Below are changes we detected for www.tetonsports.com on Sunday, March 12, 2017. Full reports can be found in your dashboard.

Backup Total

Total Files Added

Total Files Changed

Total Files Deleted

1

1677

0

Overview

Static Files: 540 total file additions, changes, and deletions

File Type

Additions

Changes

Deletions

.html

0

1

0

.css

0

203

0

.js

0

335

0

.htaccess

0

1

0

Dynamic Files: 702 total file additions, changes, and deletions

File Type

Additions

Changes

Deletions

.php

0

702

0

.rb

0

0

0

.asp

0

0

0

.jsp

0

0

0

Website Files

Below are your website files that were added, changed, or deleted in this backup. Website files include .html, .css, .php, .js, .rb, .asp, .jsp, and .htaccess files types.

Website Files Added

There were no added website files in this backup.

Website Files Changed

When a file addition, modification or deletion is detected, you can tell us whether this was an expected change () or the change was suspicious (). This feedback is added to our malware engine for deeper analysis. Your participation may help discover new infections, vulnerabilities and zero-day attacks that impact your websites as well as others protected by this service.

  1. /httpdocs/hikerchat/index.php Report Positive ChangeReport Negative Change
  2. /httpdocs/hikerchat/readme.html Report Positive ChangeReport Negative Change
  3. /httpdocs/hikerchat/wp-activate.php Report Positive ChangeReport Negative Change
  4. /httpdocs/hikerchat/wp-admin/about.php Report Positive ChangeReport Negative Change
  5. /httpdocs/hikerchat/wp-admin/admin-ajax.php Report Positive ChangeReport Negative Change
  6. /httpdocs/hikerchat/wp-admin/admin-footer.php Report Positive ChangeReport Negative Change
  7. /httpdocs/hikerchat/wp-admin/admin-functions.php Report Positive ChangeReport Negative Change
  8. /httpdocs/hikerchat/wp-admin/admin-header.php Report Positive ChangeReport Negative Change
  9. /httpdocs/hikerchat/wp-admin/admin-post.php Report Positive ChangeReport Negative Change
  10. /httpdocs/hikerchat/wp-admin/admin.php Report Positive ChangeReport Negative Change
  11. and 1232 more

 

Website Files Deleted

There were no deleted website files in this backup.

Media Files and Other

These file types can include .png, .jpeg, .gif, .avi, .mp4 and many more. The numbers represent the total number of added, changed, or modified files for these categories. Constantly changing files like log, tmp, and cache files are included in Other.

File Type

Additions

Changes

Deletions

Images

0

184

0

Videos

0

4

0

Other

1

247

0

Full reports can be found in your dashboard.


Re: Your ChangeAlert for www.yourdomain.com

Gene
 

I can read it as html in the old version of Windows Live Mail. 
 
Gene

----- Original Message -----
Sent: Sunday, March 12, 2017 12:20 PM
Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

Hi Gene,

 

That is correct, so, we need testers to read in outlook / office 365 latest version like I stated I was doing.

We need to have them use html as to do our best to duplicate and see what happens. If they get the same results then we can have a duplicatable experience.

Now that we know reading in just text works we can safely say that is not part of the discussion. Now that we hear it works in thunderbird then next step is to see if the tester was using html.

We need to narrow down the details and work on a duplicatable example that then can be resolved.

 

Can you please test in html mode to see what happens to you?

 

Thanks for all your help.

Sam

 

 

Sam Bushman

LibertyRoundTable.com

801-756-9133

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Sunday, March 12, 2017 11:10 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

 

we don't know if there is a general problem with NVDA.  There are too many variables.  Each person who reads the message must be reading mail as html.  We need reports from people who are doing so and who are using different e-mail programs, including yours.  We know that one person saw the message using Thunderbird.  We don't know if the person was reading mail as html.  I read the message using Windows Live Mail but I wasn't reading mail as html.  Conditions must be duplicated in such a test.

 

Gene

----- Original Message -----

From: Sam Bushman

Sent: Sunday, March 12, 2017 11:46 AM

Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

 

Hi Jene,

 

I can read it in other ways. I can read it just fine in Window Eyes. Because of my email others have now confirmed they can read it in thunderbird.

I don’t want to change to text email because then links and other formatting become broken when we do that.

Meaning it stripps photos etc. if you forward those emails to others you have completely destroyed the look/feel of a message.

 

My main goal is to provide duplicatable results that might help improve NVDA’s ability to deal with such content.

 

Thanks,

Sam

 

Sam Bushman

LibertyRoundTable.com

801-756-9133

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Sunday, March 12, 2017 10:42 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

 

Yes.  Try reading it in other ways.  I don't use Outlook but as I recall, there is an option to read the message in a browser.  You may also be reading mail as html.  If you change to read messages in plain text, you may be able to read it.  I don't know if this is still the case, but for quite some time, some html messages weren't read correctly in Outlook for technical reasons. 

 

Gene

----- Original Message -----

From: Sam Bushman

Sent: Sunday, March 12, 2017 11:00 AM

Subject: [nvda] Your ChangeAlert for www.yourdomain.com

 

Hi All,

 

Can you read the below message with ease?

I can’t read it in outlook live 365 for business …

 

Thanks for checking on this for me.

 

 

From: CodeGuard Team [mailto:notifications@...]
Sent: Sunday, March 12, 2017 1:08 AM
Subject: Your ChangeAlert for www.tetonsports.com

 

Logo

ChangeAlert Summary

Below are changes we detected for www.tetonsports.com on Sunday, March 12, 2017. Full reports can be found in your dashboard.

Backup Total

Total Files Added

Total Files Changed

Total Files Deleted

1

1677

0

Overview

Static Files: 540 total file additions, changes, and deletions

File Type

Additions

Changes

Deletions

.html

0

1

0

.css

0

203

0

.js

0

335

0

.htaccess

0

1

0

Dynamic Files: 702 total file additions, changes, and deletions

File Type

Additions

Changes

Deletions

.php

0

702

0

.rb

0

0

0

.asp

0

0

0

.jsp

0

0

0

Website Files

Below are your website files that were added, changed, or deleted in this backup. Website files include .html, .css, .php, .js, .rb, .asp, .jsp, and .htaccess files types.

Website Files Added

There were no added website files in this backup.

Website Files Changed

When a file addition, modification or deletion is detected, you can tell us whether this was an expected change () or the change was suspicious (). This feedback is added to our malware engine for deeper analysis. Your participation may help discover new infections, vulnerabilities and zero-day attacks that impact your websites as well as others protected by this service.

  1. /httpdocs/hikerchat/index.php Report Positive ChangeReport Negative Change
  2. /httpdocs/hikerchat/readme.html Report Positive ChangeReport Negative Change
  3. /httpdocs/hikerchat/wp-activate.php Report Positive ChangeReport Negative Change
  4. /httpdocs/hikerchat/wp-admin/about.php Report Positive ChangeReport Negative Change
  5. /httpdocs/hikerchat/wp-admin/admin-ajax.php Report Positive ChangeReport Negative Change
  6. /httpdocs/hikerchat/wp-admin/admin-footer.php Report Positive ChangeReport Negative Change
  7. /httpdocs/hikerchat/wp-admin/admin-functions.php Report Positive ChangeReport Negative Change
  8. /httpdocs/hikerchat/wp-admin/admin-header.php Report Positive ChangeReport Negative Change
  9. /httpdocs/hikerchat/wp-admin/admin-post.php Report Positive ChangeReport Negative Change
  10. /httpdocs/hikerchat/wp-admin/admin.php Report Positive ChangeReport Negative Change
  11. and 1232 more

 

Website Files Deleted

There were no deleted website files in this backup.

Media Files and Other

These file types can include .png, .jpeg, .gif, .avi, .mp4 and many more. The numbers represent the total number of added, changed, or modified files for these categories. Constantly changing files like log, tmp, and cache files are included in Other.

File Type

Additions

Changes

Deletions

Images

0

184

0

Videos

0

4

0

Other

1

247

0

Full reports can be found in your dashboard.


Re: Your ChangeAlert for www.yourdomain.com

Sam Bushman
 

Hi Gene,

 

Great point, I can read the message that came from the list just fine. That is the same as a forward.

We now need to see how I can get the message to others to test in its original state.

Any ideas?

 

Thanks,

 

Sam Bushman

LibertyRoundTable.com

801-756-9133

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Sunday, March 12, 2017 11:16 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

 

Also, I don't think forwarding the message would change it but I would suggest forwarding it to yourself.  We need to rule out the possibility that the original doesn't read properly in your program using NVDA but the forward may for some reason.  there are too many unknown variables to draw even tentative conclusions now.

 

Gene

----- Original Message -----

Sent: Sunday, March 12, 2017 11:46 AM

Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

 

Hi Jene,

 

I can read it in other ways. I can read it just fine in Window Eyes. Because of my email others have now confirmed they can read it in thunderbird.

I don’t want to change to text email because then links and other formatting become broken when we do that.

Meaning it stripps photos etc. if you forward those emails to others you have completely destroyed the look/feel of a message.

 

My main goal is to provide duplicatable results that might help improve NVDA’s ability to deal with such content.

 

Thanks,

Sam

 

Sam Bushman

LibertyRoundTable.com

801-756-9133

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Sunday, March 12, 2017 10:42 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

 

Yes.  Try reading it in other ways.  I don't use Outlook but as I recall, there is an option to read the message in a browser.  You may also be reading mail as html.  If you change to read messages in plain text, you may be able to read it.  I don't know if this is still the case, but for quite some time, some html messages weren't read correctly in Outlook for technical reasons. 

 

Gene

----- Original Message -----

Sent: Sunday, March 12, 2017 11:00 AM

Subject: [nvda] Your ChangeAlert for www.yourdomain.com

 

Hi All,

 

Can you read the below message with ease?

I can’t read it in outlook live 365 for business …

 

Thanks for checking on this for me.

 

 

From: CodeGuard Team [mailto:notifications@...]
Sent: Sunday, March 12, 2017 1:08 AM
Subject: Your ChangeAlert for www.tetonsports.com

 

Logo

ChangeAlert Summary

Below are changes we detected for www.tetonsports.com on Sunday, March 12, 2017. Full reports can be found in your dashboard.

Backup Total

Total Files Added

Total Files Changed

Total Files Deleted

1

1677

0

Overview

Static Files: 540 total file additions, changes, and deletions

File Type

Additions

Changes

Deletions

.html

0

1

0

.css

0

203

0

.js

0

335

0

.htaccess

0

1

0

Dynamic Files: 702 total file additions, changes, and deletions

File Type

Additions

Changes

Deletions

.php

0

702

0

.rb

0

0

0

.asp

0

0

0

.jsp

0

0

0

Website Files

Below are your website files that were added, changed, or deleted in this backup. Website files include .html, .css, .php, .js, .rb, .asp, .jsp, and .htaccess files types.

Website Files Added

There were no added website files in this backup.

Website Files Changed

When a file addition, modification or deletion is detected, you can tell us whether this was an expected change () or the change was suspicious (). This feedback is added to our malware engine for deeper analysis. Your participation may help discover new infections, vulnerabilities and zero-day attacks that impact your websites as well as others protected by this service.

  1. /httpdocs/hikerchat/index.php Report Positive ChangeReport Negative Change
  2. /httpdocs/hikerchat/readme.html Report Positive ChangeReport Negative Change
  3. /httpdocs/hikerchat/wp-activate.php Report Positive ChangeReport Negative Change
  4. /httpdocs/hikerchat/wp-admin/about.php Report Positive ChangeReport Negative Change
  5. /httpdocs/hikerchat/wp-admin/admin-ajax.php Report Positive ChangeReport Negative Change
  6. /httpdocs/hikerchat/wp-admin/admin-footer.php Report Positive ChangeReport Negative Change
  7. /httpdocs/hikerchat/wp-admin/admin-functions.php Report Positive ChangeReport Negative Change
  8. /httpdocs/hikerchat/wp-admin/admin-header.php Report Positive ChangeReport Negative Change
  9. /httpdocs/hikerchat/wp-admin/admin-post.php Report Positive ChangeReport Negative Change
  10. /httpdocs/hikerchat/wp-admin/admin.php Report Positive ChangeReport Negative Change
  11. and 1232 more

 

Website Files Deleted

There were no deleted website files in this backup.

Media Files and Other

These file types can include .png, .jpeg, .gif, .avi, .mp4 and many more. The numbers represent the total number of added, changed, or modified files for these categories. Constantly changing files like log, tmp, and cache files are included in Other.

File Type

Additions

Changes

Deletions

Images

0

184

0

Videos

0

4

0

Other

1

247

0

Full reports can be found in your dashboard.


Re: Your ChangeAlert for www.yourdomain.com

Sam Bushman
 

Hi Gene,

 

That is correct, so, we need testers to read in outlook / office 365 latest version like I stated I was doing.

We need to have them use html as to do our best to duplicate and see what happens. If they get the same results then we can have a duplicatable experience.

Now that we know reading in just text works we can safely say that is not part of the discussion. Now that we hear it works in thunderbird then next step is to see if the tester was using html.

We need to narrow down the details and work on a duplicatable example that then can be resolved.

 

Can you please test in html mode to see what happens to you?

 

Thanks for all your help.

Sam

 

 

Sam Bushman

LibertyRoundTable.com

801-756-9133

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Sunday, March 12, 2017 11:10 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

 

we don't know if there is a general problem with NVDA.  There are too many variables.  Each person who reads the message must be reading mail as html.  We need reports from people who are doing so and who are using different e-mail programs, including yours.  We know that one person saw the message using Thunderbird.  We don't know if the person was reading mail as html.  I read the message using Windows Live Mail but I wasn't reading mail as html.  Conditions must be duplicated in such a test.

 

Gene

----- Original Message -----

Sent: Sunday, March 12, 2017 11:46 AM

Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

 

Hi Jene,

 

I can read it in other ways. I can read it just fine in Window Eyes. Because of my email others have now confirmed they can read it in thunderbird.

I don’t want to change to text email because then links and other formatting become broken when we do that.

Meaning it stripps photos etc. if you forward those emails to others you have completely destroyed the look/feel of a message.

 

My main goal is to provide duplicatable results that might help improve NVDA’s ability to deal with such content.

 

Thanks,

Sam

 

Sam Bushman

LibertyRoundTable.com

801-756-9133

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Sunday, March 12, 2017 10:42 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

 

Yes.  Try reading it in other ways.  I don't use Outlook but as I recall, there is an option to read the message in a browser.  You may also be reading mail as html.  If you change to read messages in plain text, you may be able to read it.  I don't know if this is still the case, but for quite some time, some html messages weren't read correctly in Outlook for technical reasons. 

 

Gene

----- Original Message -----

Sent: Sunday, March 12, 2017 11:00 AM

Subject: [nvda] Your ChangeAlert for www.yourdomain.com

 

Hi All,

 

Can you read the below message with ease?

I can’t read it in outlook live 365 for business …

 

Thanks for checking on this for me.

 

 

From: CodeGuard Team [mailto:notifications@...]
Sent: Sunday, March 12, 2017 1:08 AM
Subject: Your ChangeAlert for www.tetonsports.com

 

Logo

ChangeAlert Summary

Below are changes we detected for www.tetonsports.com on Sunday, March 12, 2017. Full reports can be found in your dashboard.

Backup Total

Total Files Added

Total Files Changed

Total Files Deleted

1

1677

0

Overview

Static Files: 540 total file additions, changes, and deletions

File Type

Additions

Changes

Deletions

.html

0

1

0

.css

0

203

0

.js

0

335

0

.htaccess

0

1

0

Dynamic Files: 702 total file additions, changes, and deletions

File Type

Additions

Changes

Deletions

.php

0

702

0

.rb

0

0

0

.asp

0

0

0

.jsp

0

0

0

Website Files

Below are your website files that were added, changed, or deleted in this backup. Website files include .html, .css, .php, .js, .rb, .asp, .jsp, and .htaccess files types.

Website Files Added

There were no added website files in this backup.

Website Files Changed

When a file addition, modification or deletion is detected, you can tell us whether this was an expected change () or the change was suspicious (). This feedback is added to our malware engine for deeper analysis. Your participation may help discover new infections, vulnerabilities and zero-day attacks that impact your websites as well as others protected by this service.

  1. /httpdocs/hikerchat/index.php Report Positive ChangeReport Negative Change
  2. /httpdocs/hikerchat/readme.html Report Positive ChangeReport Negative Change
  3. /httpdocs/hikerchat/wp-activate.php Report Positive ChangeReport Negative Change
  4. /httpdocs/hikerchat/wp-admin/about.php Report Positive ChangeReport Negative Change
  5. /httpdocs/hikerchat/wp-admin/admin-ajax.php Report Positive ChangeReport Negative Change
  6. /httpdocs/hikerchat/wp-admin/admin-footer.php Report Positive ChangeReport Negative Change
  7. /httpdocs/hikerchat/wp-admin/admin-functions.php Report Positive ChangeReport Negative Change
  8. /httpdocs/hikerchat/wp-admin/admin-header.php Report Positive ChangeReport Negative Change
  9. /httpdocs/hikerchat/wp-admin/admin-post.php Report Positive ChangeReport Negative Change
  10. /httpdocs/hikerchat/wp-admin/admin.php Report Positive ChangeReport Negative Change
  11. and 1232 more

 

Website Files Deleted

There were no deleted website files in this backup.

Media Files and Other

These file types can include .png, .jpeg, .gif, .avi, .mp4 and many more. The numbers represent the total number of added, changed, or modified files for these categories. Constantly changing files like log, tmp, and cache files are included in Other.

File Type

Additions

Changes

Deletions

Images

0

184

0

Videos

0

4

0

Other

1

247

0

Full reports can be found in your dashboard.


Re: Your ChangeAlert for www.yourdomain.com

Gene
 

Also, I don't think forwarding the message would change it but I would suggest forwarding it to yourself.  We need to rule out the possibility that the original doesn't read properly in your program using NVDA but the forward may for some reason.  there are too many unknown variables to draw even tentative conclusions now.
 
Gene

----- Original Message -----
Sent: Sunday, March 12, 2017 11:46 AM
Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

Hi Jene,

 

I can read it in other ways. I can read it just fine in Window Eyes. Because of my email others have now confirmed they can read it in thunderbird.

I don’t want to change to text email because then links and other formatting become broken when we do that.

Meaning it stripps photos etc. if you forward those emails to others you have completely destroyed the look/feel of a message.

 

My main goal is to provide duplicatable results that might help improve NVDA’s ability to deal with such content.

 

Thanks,

Sam

 

Sam Bushman

LibertyRoundTable.com

801-756-9133

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Sunday, March 12, 2017 10:42 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

 

Yes.  Try reading it in other ways.  I don't use Outlook but as I recall, there is an option to read the message in a browser.  You may also be reading mail as html.  If you change to read messages in plain text, you may be able to read it.  I don't know if this is still the case, but for quite some time, some html messages weren't read correctly in Outlook for technical reasons. 

 

Gene

----- Original Message -----

From: Sam Bushman

Sent: Sunday, March 12, 2017 11:00 AM

Subject: [nvda] Your ChangeAlert for www.yourdomain.com

 

Hi All,

 

Can you read the below message with ease?

I can’t read it in outlook live 365 for business …

 

Thanks for checking on this for me.

 

 

From: CodeGuard Team [mailto:notifications@...]
Sent: Sunday, March 12, 2017 1:08 AM
Subject: Your ChangeAlert for www.tetonsports.com

 

Logo

ChangeAlert Summary

Below are changes we detected for www.tetonsports.com on Sunday, March 12, 2017. Full reports can be found in your dashboard.

Backup Total

Total Files Added

Total Files Changed

Total Files Deleted

1

1677

0

Overview

Static Files: 540 total file additions, changes, and deletions

File Type

Additions

Changes

Deletions

.html

0

1

0

.css

0

203

0

.js

0

335

0

.htaccess

0

1

0

Dynamic Files: 702 total file additions, changes, and deletions

File Type

Additions

Changes

Deletions

.php

0

702

0

.rb

0

0

0

.asp

0

0

0

.jsp

0

0

0

Website Files

Below are your website files that were added, changed, or deleted in this backup. Website files include .html, .css, .php, .js, .rb, .asp, .jsp, and .htaccess files types.

Website Files Added

There were no added website files in this backup.

Website Files Changed

When a file addition, modification or deletion is detected, you can tell us whether this was an expected change () or the change was suspicious (). This feedback is added to our malware engine for deeper analysis. Your participation may help discover new infections, vulnerabilities and zero-day attacks that impact your websites as well as others protected by this service.

  1. /httpdocs/hikerchat/index.php Report Positive ChangeReport Negative Change
  2. /httpdocs/hikerchat/readme.html Report Positive ChangeReport Negative Change
  3. /httpdocs/hikerchat/wp-activate.php Report Positive ChangeReport Negative Change
  4. /httpdocs/hikerchat/wp-admin/about.php Report Positive ChangeReport Negative Change
  5. /httpdocs/hikerchat/wp-admin/admin-ajax.php Report Positive ChangeReport Negative Change
  6. /httpdocs/hikerchat/wp-admin/admin-footer.php Report Positive ChangeReport Negative Change
  7. /httpdocs/hikerchat/wp-admin/admin-functions.php Report Positive ChangeReport Negative Change
  8. /httpdocs/hikerchat/wp-admin/admin-header.php Report Positive ChangeReport Negative Change
  9. /httpdocs/hikerchat/wp-admin/admin-post.php Report Positive ChangeReport Negative Change
  10. /httpdocs/hikerchat/wp-admin/admin.php Report Positive ChangeReport Negative Change
  11. and 1232 more

 

Website Files Deleted

There were no deleted website files in this backup.

Media Files and Other

These file types can include .png, .jpeg, .gif, .avi, .mp4 and many more. The numbers represent the total number of added, changed, or modified files for these categories. Constantly changing files like log, tmp, and cache files are included in Other.

File Type

Additions

Changes

Deletions

Images

0

184

0

Videos

0

4

0

Other

1

247

0

Full reports can be found in your dashboard.


Re: Your ChangeAlert for www.yourdomain.com

Gene
 

we don't know if there is a general problem with NVDA.  There are too many variables.  Each person who reads the message must be reading mail as html.  We need reports from people who are doing so and who are using different e-mail programs, including yours.  We know that one person saw the message using Thunderbird.  We don't know if the person was reading mail as html.  I read the message using Windows Live Mail but I wasn't reading mail as html.  Conditions must be duplicated in such a test.
 
Gene

----- Original Message -----
Sent: Sunday, March 12, 2017 11:46 AM
Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

Hi Jene,

 

I can read it in other ways. I can read it just fine in Window Eyes. Because of my email others have now confirmed they can read it in thunderbird.

I don’t want to change to text email because then links and other formatting become broken when we do that.

Meaning it stripps photos etc. if you forward those emails to others you have completely destroyed the look/feel of a message.

 

My main goal is to provide duplicatable results that might help improve NVDA’s ability to deal with such content.

 

Thanks,

Sam

 

Sam Bushman

LibertyRoundTable.com

801-756-9133

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Sunday, March 12, 2017 10:42 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

 

Yes.  Try reading it in other ways.  I don't use Outlook but as I recall, there is an option to read the message in a browser.  You may also be reading mail as html.  If you change to read messages in plain text, you may be able to read it.  I don't know if this is still the case, but for quite some time, some html messages weren't read correctly in Outlook for technical reasons. 

 

Gene

----- Original Message -----

From: Sam Bushman

Sent: Sunday, March 12, 2017 11:00 AM

Subject: [nvda] Your ChangeAlert for www.yourdomain.com

 

Hi All,

 

Can you read the below message with ease?

I can’t read it in outlook live 365 for business …

 

Thanks for checking on this for me.

 

 

From: CodeGuard Team [mailto:notifications@...]
Sent: Sunday, March 12, 2017 1:08 AM
Subject: Your ChangeAlert for www.tetonsports.com

 

Logo

ChangeAlert Summary

Below are changes we detected for www.tetonsports.com on Sunday, March 12, 2017. Full reports can be found in your dashboard.

Backup Total

Total Files Added

Total Files Changed

Total Files Deleted

1

1677

0

Overview

Static Files: 540 total file additions, changes, and deletions

File Type

Additions

Changes

Deletions

.html

0

1

0

.css

0

203

0

.js

0

335

0

.htaccess

0

1

0

Dynamic Files: 702 total file additions, changes, and deletions

File Type

Additions

Changes

Deletions

.php

0

702

0

.rb

0

0

0

.asp

0

0

0

.jsp

0

0

0

Website Files

Below are your website files that were added, changed, or deleted in this backup. Website files include .html, .css, .php, .js, .rb, .asp, .jsp, and .htaccess files types.

Website Files Added

There were no added website files in this backup.

Website Files Changed

When a file addition, modification or deletion is detected, you can tell us whether this was an expected change () or the change was suspicious (). This feedback is added to our malware engine for deeper analysis. Your participation may help discover new infections, vulnerabilities and zero-day attacks that impact your websites as well as others protected by this service.

  1. /httpdocs/hikerchat/index.php Report Positive ChangeReport Negative Change
  2. /httpdocs/hikerchat/readme.html Report Positive ChangeReport Negative Change
  3. /httpdocs/hikerchat/wp-activate.php Report Positive ChangeReport Negative Change
  4. /httpdocs/hikerchat/wp-admin/about.php Report Positive ChangeReport Negative Change
  5. /httpdocs/hikerchat/wp-admin/admin-ajax.php Report Positive ChangeReport Negative Change
  6. /httpdocs/hikerchat/wp-admin/admin-footer.php Report Positive ChangeReport Negative Change
  7. /httpdocs/hikerchat/wp-admin/admin-functions.php Report Positive ChangeReport Negative Change
  8. /httpdocs/hikerchat/wp-admin/admin-header.php Report Positive ChangeReport Negative Change
  9. /httpdocs/hikerchat/wp-admin/admin-post.php Report Positive ChangeReport Negative Change
  10. /httpdocs/hikerchat/wp-admin/admin.php Report Positive ChangeReport Negative Change
  11. and 1232 more

 

Website Files Deleted

There were no deleted website files in this backup.

Media Files and Other

These file types can include .png, .jpeg, .gif, .avi, .mp4 and many more. The numbers represent the total number of added, changed, or modified files for these categories. Constantly changing files like log, tmp, and cache files are included in Other.

File Type

Additions

Changes

Deletions

Images

0

184

0

Videos

0

4

0

Other

1

247

0

Full reports can be found in your dashboard.


Re: Your ChangeAlert for www.yourdomain.com

Sam Bushman
 

Hi Jene,

 

I can read it in other ways. I can read it just fine in Window Eyes. Because of my email others have now confirmed they can read it in thunderbird.

I don’t want to change to text email because then links and other formatting become broken when we do that.

Meaning it stripps photos etc. if you forward those emails to others you have completely destroyed the look/feel of a message.

 

My main goal is to provide duplicatable results that might help improve NVDA’s ability to deal with such content.

 

Thanks,

Sam

 

Sam Bushman

LibertyRoundTable.com

801-756-9133

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Gene
Sent: Sunday, March 12, 2017 10:42 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Your ChangeAlert for www.yourdomain.com

 

Yes.  Try reading it in other ways.  I don't use Outlook but as I recall, there is an option to read the message in a browser.  You may also be reading mail as html.  If you change to read messages in plain text, you may be able to read it.  I don't know if this is still the case, but for quite some time, some html messages weren't read correctly in Outlook for technical reasons. 

 

Gene

----- Original Message -----

Sent: Sunday, March 12, 2017 11:00 AM

Subject: [nvda] Your ChangeAlert for www.yourdomain.com

 

Hi All,

 

Can you read the below message with ease?

I can’t read it in outlook live 365 for business …

 

Thanks for checking on this for me.

 

 

From: CodeGuard Team [mailto:notifications@...]
Sent: Sunday, March 12, 2017 1:08 AM
Subject: Your ChangeAlert for www.tetonsports.com

 

Logo

ChangeAlert Summary

Below are changes we detected for www.tetonsports.com on Sunday, March 12, 2017. Full reports can be found in your dashboard.

Backup Total

Total Files Added

Total Files Changed

Total Files Deleted

1

1677

0

Overview

Static Files: 540 total file additions, changes, and deletions

File Type

Additions

Changes

Deletions

.html

0

1

0

.css

0

203

0

.js

0

335

0

.htaccess

0

1

0

Dynamic Files: 702 total file additions, changes, and deletions

File Type

Additions

Changes

Deletions

.php

0

702

0

.rb

0

0

0

.asp

0

0

0

.jsp

0

0

0

Website Files

Below are your website files that were added, changed, or deleted in this backup. Website files include .html, .css, .php, .js, .rb, .asp, .jsp, and .htaccess files types.

Website Files Added

There were no added website files in this backup.

Website Files Changed

When a file addition, modification or deletion is detected, you can tell us whether this was an expected change () or the change was suspicious (). This feedback is added to our malware engine for deeper analysis. Your participation may help discover new infections, vulnerabilities and zero-day attacks that impact your websites as well as others protected by this service.

  1. /httpdocs/hikerchat/index.php Report Positive ChangeReport Negative Change
  2. /httpdocs/hikerchat/readme.html Report Positive ChangeReport Negative Change
  3. /httpdocs/hikerchat/wp-activate.php Report Positive ChangeReport Negative Change
  4. /httpdocs/hikerchat/wp-admin/about.php Report Positive ChangeReport Negative Change
  5. /httpdocs/hikerchat/wp-admin/admin-ajax.php Report Positive ChangeReport Negative Change
  6. /httpdocs/hikerchat/wp-admin/admin-footer.php Report Positive ChangeReport Negative Change
  7. /httpdocs/hikerchat/wp-admin/admin-functions.php Report Positive ChangeReport Negative Change
  8. /httpdocs/hikerchat/wp-admin/admin-header.php Report Positive ChangeReport Negative Change
  9. /httpdocs/hikerchat/wp-admin/admin-post.php Report Positive ChangeReport Negative Change
  10. /httpdocs/hikerchat/wp-admin/admin.php Report Positive ChangeReport Negative Change
  11. and 1232 more

 

Website Files Deleted

There were no deleted website files in this backup.

Media Files and Other

These file types can include .png, .jpeg, .gif, .avi, .mp4 and many more. The numbers represent the total number of added, changed, or modified files for these categories. Constantly changing files like log, tmp, and cache files are included in Other.

File Type

Additions

Changes

Deletions

Images

0

184

0

Videos

0

4

0

Other

1

247

0

Full reports can be found in your dashboard.


Re: Your ChangeAlert for www.yourdomain.com

Gene
 

Yes.  Try reading it in other ways.  I don't use Outlook but as I recall, there is an option to read the message in a browser.  You may also be reading mail as html.  If you change to read messages in plain text, you may be able to read it.  I don't know if this is still the case, but for quite some time, some html messages weren't read correctly in Outlook for technical reasons. 
 
Gene

----- Original Message -----
Sent: Sunday, March 12, 2017 11:00 AM
Subject: [nvda] Your ChangeAlert for www.yourdomain.com

Hi All,

 

Can you read the below message with ease?

I can’t read it in outlook live 365 for business …

 

Thanks for checking on this for me.

 

 

From: CodeGuard Team [mailto:notifications@...]
Sent: Sunday, March 12, 2017 1:08 AM
Subject: Your ChangeAlert for www.tetonsports.com

 

Logo

ChangeAlert Summary

Below are changes we detected for www.tetonsports.com on Sunday, March 12, 2017. Full reports can be found in your dashboard.

Backup Total

Total Files Added

Total Files Changed

Total Files Deleted

1

1677

0

Overview

Static Files: 540 total file additions, changes, and deletions

File Type

Additions

Changes

Deletions

.html

0

1

0

.css

0

203

0

.js

0

335

0

.htaccess

0

1

0

Dynamic Files: 702 total file additions, changes, and deletions

File Type

Additions

Changes

Deletions

.php

0

702

0

.rb

0

0

0

.asp

0

0

0

.jsp

0

0

0

Website Files

Below are your website files that were added, changed, or deleted in this backup. Website files include .html, .css, .php, .js, .rb, .asp, .jsp, and .htaccess files types.

Website Files Added

There were no added website files in this backup.

Website Files Changed

When a file addition, modification or deletion is detected, you can tell us whether this was an expected change () or the change was suspicious (). This feedback is added to our malware engine for deeper analysis. Your participation may help discover new infections, vulnerabilities and zero-day attacks that impact your websites as well as others protected by this service.

  1. /httpdocs/hikerchat/index.php Report Positive ChangeReport Negative Change
  2. /httpdocs/hikerchat/readme.html Report Positive ChangeReport Negative Change
  3. /httpdocs/hikerchat/wp-activate.php Report Positive ChangeReport Negative Change
  4. /httpdocs/hikerchat/wp-admin/about.php Report Positive ChangeReport Negative Change
  5. /httpdocs/hikerchat/wp-admin/admin-ajax.php Report Positive ChangeReport Negative Change
  6. /httpdocs/hikerchat/wp-admin/admin-footer.php Report Positive ChangeReport Negative Change
  7. /httpdocs/hikerchat/wp-admin/admin-functions.php Report Positive ChangeReport Negative Change
  8. /httpdocs/hikerchat/wp-admin/admin-header.php Report Positive ChangeReport Negative Change
  9. /httpdocs/hikerchat/wp-admin/admin-post.php Report Positive ChangeReport Negative Change
  10. /httpdocs/hikerchat/wp-admin/admin.php Report Positive ChangeReport Negative Change
  11. and 1232 more

 

Website Files Deleted

There were no deleted website files in this backup.

Media Files and Other

These file types can include .png, .jpeg, .gif, .avi, .mp4 and many more. The numbers represent the total number of added, changed, or modified files for these categories. Constantly changing files like log, tmp, and cache files are included in Other.

File Type

Additions

Changes

Deletions

Images

0

184

0

Videos

0

4

0

Other

1

247

0

Full reports can be found in your dashboard.


Re: Your ChangeAlert for www.yourdomain.com

Jacob Kruger
 

Seems fine in thunderbird.


Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."
On 2017-03-12 18:00, Sam Bushman wrote:

Hi All,

 

Can you read the below message with ease?

I can’t read it in outlook live 365 for business …

 

Thanks for checking on this for me.

 

 

From: CodeGuard Team [mailto:notifications@...]
Sent: Sunday, March 12, 2017 1:08 AM
Subject: Your ChangeAlert for www.tetonsports.com

 




Logo

ChangeAlert Summary

Below are changes we detected for www.tetonsports.com on Sunday, March 12, 2017. Full reports can be found in your dashboard.


Backup Total

Total Files Added

Total Files Changed

Total Files Deleted

1

1677

0

Overview

Static Files: 540 total file additions, changes, and deletions

File Type

Additions

Changes

Deletions

.html

0

1

0

.css

0

203

0

.js

0

335

0

.htaccess

0

1

0

Dynamic Files: 702 total file additions, changes, and deletions

File Type

Additions

Changes

Deletions

.php

0

702

0

.rb

0

0

0

.asp

0

0

0

.jsp

0

0

0

Website Files

Below are your website files that were added, changed, or deleted in this backup. Website files include .html, .css, .php, .js, .rb, .asp, .jsp, and .htaccess files types.

Website Files Added

There were no added website files in this backup.

Website Files Changed

When a file addition, modification or deletion is detected, you can tell us whether this was an expected change () or the change was suspicious (). This feedback is added to our malware engine for deeper analysis. Your participation may help discover new infections, vulnerabilities and zero-day attacks that impact your websites as well as others protected by this service.

  1. /httpdocs/hikerchat/index.php Report Positive
                                                  ChangeReport Negative
                                                  Change
  2. /httpdocs/hikerchat/readme.html Report Positive
                                                  ChangeReport Negative
                                                  Change
  3. /httpdocs/hikerchat/wp-activate.php Report Positive
                                                  ChangeReport Negative
                                                  Change
  4. /httpdocs/hikerchat/wp-admin/about.php Report Positive
                                                  ChangeReport Negative
                                                  Change
  5. /httpdocs/hikerchat/wp-admin/admin-ajax.php Report Positive
                                                  ChangeReport Negative
                                                  Change
  6. /httpdocs/hikerchat/wp-admin/admin-footer.php Report Positive
                                                  ChangeReport Negative
                                                  Change
  7. /httpdocs/hikerchat/wp-admin/admin-functions.php Report Positive
                                                  ChangeReport Negative
                                                  Change
  8. /httpdocs/hikerchat/wp-admin/admin-header.php Report Positive
                                                  ChangeReport Negative
                                                  Change
  9. /httpdocs/hikerchat/wp-admin/admin-post.php Report Positive
                                                  ChangeReport Negative
                                                  Change
  10. /httpdocs/hikerchat/wp-admin/admin.php Report Positive
                                                  ChangeReport Negative
                                                  Change
  11. and 1232 more

 

Website Files Deleted

There were no deleted website files in this backup.

Media Files and Other

These file types can include .png, .jpeg, .gif, .avi, .mp4 and many more. The numbers represent the total number of added, changed, or modified files for these categories. Constantly changing files like log, tmp, and cache files are included in Other.

File Type

Additions

Changes

Deletions

Images

0

184

0

Videos

0

4

0

Other

1

247

0

Full reports can be found in your dashboard.










Your ChangeAlert for www.yourdomain.com

Sam Bushman
 

Hi All,

 

Can you read the below message with ease?

I can’t read it in outlook live 365 for business …

 

Thanks for checking on this for me.

 

 

From: CodeGuard Team [mailto:notifications@...]
Sent: Sunday, March 12, 2017 1:08 AM
Subject: Your ChangeAlert for www.tetonsports.com

 

Logo

ChangeAlert Summary

Below are changes we detected for www.tetonsports.com on Sunday, March 12, 2017. Full reports can be found in your dashboard.

Backup Total

Total Files Added

Total Files Changed

Total Files Deleted

1

1677

0

Overview

Static Files: 540 total file additions, changes, and deletions

File Type

Additions

Changes

Deletions

.html

0

1

0

.css

0

203

0

.js

0

335

0

.htaccess

0

1

0

Dynamic Files: 702 total file additions, changes, and deletions

File Type

Additions

Changes

Deletions

.php

0

702

0

.rb

0

0

0

.asp

0

0

0

.jsp

0

0

0

Website Files

Below are your website files that were added, changed, or deleted in this backup. Website files include .html, .css, .php, .js, .rb, .asp, .jsp, and .htaccess files types.

Website Files Added

There were no added website files in this backup.

Website Files Changed

When a file addition, modification or deletion is detected, you can tell us whether this was an expected change () or the change was suspicious (). This feedback is added to our malware engine for deeper analysis. Your participation may help discover new infections, vulnerabilities and zero-day attacks that impact your websites as well as others protected by this service.

  1. /httpdocs/hikerchat/index.php Report Positive ChangeReport Negative Change
  2. /httpdocs/hikerchat/readme.html Report Positive ChangeReport Negative Change
  3. /httpdocs/hikerchat/wp-activate.php Report Positive ChangeReport Negative Change
  4. /httpdocs/hikerchat/wp-admin/about.php Report Positive ChangeReport Negative Change
  5. /httpdocs/hikerchat/wp-admin/admin-ajax.php Report Positive ChangeReport Negative Change
  6. /httpdocs/hikerchat/wp-admin/admin-footer.php Report Positive ChangeReport Negative Change
  7. /httpdocs/hikerchat/wp-admin/admin-functions.php Report Positive ChangeReport Negative Change
  8. /httpdocs/hikerchat/wp-admin/admin-header.php Report Positive ChangeReport Negative Change
  9. /httpdocs/hikerchat/wp-admin/admin-post.php Report Positive ChangeReport Negative Change
  10. /httpdocs/hikerchat/wp-admin/admin.php Report Positive ChangeReport Negative Change
  11. and 1232 more

 

Website Files Deleted

There were no deleted website files in this backup.

Media Files and Other

These file types can include .png, .jpeg, .gif, .avi, .mp4 and many more. The numbers represent the total number of added, changed, or modified files for these categories. Constantly changing files like log, tmp, and cache files are included in Other.

File Type

Additions

Changes

Deletions

Images

0

184

0

Videos

0

4

0

Other

1

247

0

Full reports can be found in your dashboard.


Re: omnipage 18

The Gamages
 

Hello,

I have now installed Omnipage 18, I have got as far as scanning a
document, but it is in a format not readable to a screen reader, I've
tried going to the process menu then perform OCR, and tried all the
options in the sub menu with no success.
Can you tell me what you do to convert this scanned image to a word
document or something readable?


Best Regards, Jim.

-----Original Message-----
From: Simone Dal Maso
Sent: Friday, March 03, 2017 1:46 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] omnipage 18

Yes, the good thing is that it is accessible, while for example
Finereader is quite complicate because you can't review the text.

Il 03/03/2017 12:49, The Gamages ha scritto:
Hello,

Has anyone tried Omnipage 18 with NVDA and Windows ten?

Any comments appreciated.
Best Regards, Jim.


Re: accessible program that will allow you to restore yoursound profile

Jacob Kruger
 

Where did you save it?


As in, look for it via normal file system, and, then make sure you are trying to then reopen it from same location.


Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."
On 2017-03-12 13:04, Dennis L wrote:

I think I am missing something I am not sure what however.  I thought I saved the profile but I can’t get it to open.  If someone could look and possibly see what I am doing wrong I would appreciate it.

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jacob Kruger
Sent: Sunday, March 12, 2017 6:51 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] accessible program that will allow you to restore yoursound profile

 

It runs/launches, but, haven't tried out the profiles - not much use to me, but, give it a go yourself?

 

For example, since it offers command line commands, etc., you might be able to define multiple profiles, and, link to them via desktop shortcuts, that you could then assign shortcut keys to?

 

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

On 2017-03-12 12:13, Dennis L wrote:

Have you had a chance to test this?

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jacob Kruger
Sent: Saturday, March 11, 2017 1:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] accessible program that will allow you to restore yoursound profile

 

I think the original poster was looking for a way to set different volume levels for multiple, different devices at the touch of a keystroke.

 

Stay well

 

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

On 2017-03-11 18:09, David Griffith wrote:

 

I take a  slightly different approach to all this.

 

I used to try various utilities to try and prevent Windows loading in amuted state or with volume set to zero.

 

Nowadays I do not bother as I routinely use a Microsoft Natural Ergononic  Keyboard  which have clearly tactile media keys including   toglling mute status or volume up and down. Even if the computer is muted a press of the volume up key will unmute the computer.

Many laptops  will also have media keys which presumably perform the same function.

 

If for whatever reason I need to  adjust volumes across the programs loaded I simply press windows key and type sndvol  which opens up a mixer page which does pretty much all of what is described in the third party utility programs in windos already.

 

David ?Griffith

 

 

 

 

 

Sent from Mail for Windows 10

 

From: Jacob Kruger
Sent: 11 March 2017 14:37
To: nvda@nvda.groups.io
Subject: Re: [nvda] accessible program that will allow you to restore yoursound profile

 

A utility app called sound volume view _might_help out here, but, that's

just a guess from description - see below.

 

Haven't even tested/tried it out, but, either way, here's the

download/detail page - the second and third links below the primary

headings on this page offer download of 32 bit and 64 bit versions:

http://www.nirsoft.net/utils/sound_volume_view.html

 

Description

SoundVolumeView is a simple tool for Windows Vista/7/8/2008/10 that

displays general information and current volume level for all active

sound components on your system, and allows you to mute and unmute them

instantly.

SoundVolumeView also allows you to save a sound profile into a file,

containing the current volume level and the mute/unmute state of all

sound components, as well as the default sound devices, and then later,

load the same file to restore exactly the same volume levels and settings.

There is also extensive command-line support, which allows you to

save/load profiles, change current volume of every sound component, and

mute/unmute every sound component, without displaying any user interface.

System Requirements

This utility works on Windows Vista, Windows 7, Windows 8, Windows 2008,

and Windows 10. Both 32-bit and 64-bit systems are supported.

Windows XP and older systems are not supported.

 

Jacob Kruger

Blind Biker

Skype: BlindZA

"Resistance is futile, but, acceptance is versatile..."

 

On 2017-03-11 14:06, Brian's Mail list account wrote:

> I did some years back and they said it was not possible in the new

> sound schemes. However that may well have been that they lost

> interest, who knows?

> Brian

> bglists@...

> Sent via blueyonder.

> Please address personal email to:-

> briang1@..., putting 'Brian Gaff'

> in the display name field.

> ----- Original Message ----- From: "Dennis L" <dennisl1982@...>

> To: <nvda@nvda.groups.io>

> Sent: Saturday, March 11, 2017 3:16 AM

> Subject: Re: [nvda] accessible program that will allow you to restore

> your sound profile

>> Have you contacted them?  Have you tried it with windows7?

>> 

>> 

>> 

>> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of

>> Roger

>> Stewart

>> Sent: Friday, March 10, 2017 4:40 PM

>> To: nvda@nvda.groups.io

>> Subject: Re: [nvda] accessible program that will allow you to restore

>> your

>> sound profile

>> 

>> 

>> 

>> This is called Quick Mix.  However, it stopped working when I went to

>> Win 7

>> so I don't use it now.  It was great, very accessible and easy to

>> use. Wish

>> the developers would make a new version of it.

>> 

>> 

>> Roger

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> On 3/10/2017 2:00 PM, Dennis L wrote:

>> 

>> There was a program that worked on xp that allowed you to restore your

>> volume levels.  I can't remember what it was.

>> 

>> 

>> 

>> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of

>> Jacob

>> Kruger

>> Sent: Friday, March 10, 2017 2:44 PM

>> To: nvda@nvda.groups.io

>> Subject: Re: [nvda] accessible program that will allow you to restore

>> your

>> sound profile

>> 

>> 

>> 

>> Don't think so - it just offers overall master volume recovery, so

>> that if

>> something else lowers your volume below a certain level, it will restore

>> master volume to a pre-defined level.

>> 

>> 

>> 

>> Stay well

>> 

>> 

>> 

>> Jacob Kruger

>> Blind Biker

>> Skype: BlindZA

>> "Resistance is futile, but, acceptance is versatile..."

>> 

>> On 2017-03-10 21:31, Dennis L wrote:

>> 

>> I am not seeing how you would tell it to restore the volume level? 

>> Will it

>> let you have one if a headset is plugged in and one for your speakers?

>> 

>> 

>> 

>> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of

>> Jacob

>> Kruger

>> Sent: Friday, March 10, 2017 12:30 PM

>> To: nvda@nvda.groups.io

>> Subject: Re: [nvda] accessible program that will allow you to restore

>> your

>> sound profile

>> 

>> 

>> 

>> Dennis, while this doesn't really implement a hotkey to do it, it can

>> automatically restore your sound levels, etc. - the stascom utility

>> suite

>> from the following page:

>> 

>> https://www.stascom.co.za/stascom.html#content

>> 

>> 

>> 

>> Also offers some other utility functions - check out the documentation.

>> 

>> 

>> 

>> Stay well

>> 

>> 

>> 

>> Jacob Kruger

>> Blind Biker

>> Skype: BlindZA

>> "Resistance is futile, but, acceptance is versatile..."

>> 

>> On 2017-03-10 11:54, Dennis L wrote:

>> 

>> Hi, there was a program for windows xp that you could set a key

>> command and

>> restore your sound profile is there such a program for windows 7?

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>

 

 

 

 

 

 



Re: accessible program that will allow you to restore yoursound profile

Jacob Kruger
 

Nope.


Not much use/interest to me - but, have you checked out the help, or even just tried playing around with the settings?


As in, find an item in the list view, and, if you look at the menu systems, you can find hotkeys to make changes quickly/easily there, then try saving a profile .spr file, and, maybe see if changes get made when you then pass that file onto the executable again?


Or, if you move a copy of the .exe, etc. to under program files, or program files (x86), just in case, then you should also be able to associate something like an .spr file with it's executable so that hitting enter on a .spr file might launch that profiles settings automatically, and, then you might be able to create a shortcut that just points to the .spr file?


But, like said, while it seems to work here, I don't really need to take it much further than playing around with myself - closest I ever come is that when working with audacity, I just turn off NVDA's speech output, or put it in sleep mode while recording, etc. etc., but anyway.


Good luck


Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."
On 2017-03-12 12:51, Dennis L wrote:

I have tried it I couldn’t work I’m not sure if it’s user error.  Would you be willing to try it to see if I am possibly doing something wrong?

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jacob Kruger
Sent: Sunday, March 12, 2017 6:51 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] accessible program that will allow you to restore yoursound profile

 

It runs/launches, but, haven't tried out the profiles - not much use to me, but, give it a go yourself?

 

For example, since it offers command line commands, etc., you might be able to define multiple profiles, and, link to them via desktop shortcuts, that you could then assign shortcut keys to?

 

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

On 2017-03-12 12:13, Dennis L wrote:

Have you had a chance to test this?

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jacob Kruger
Sent: Saturday, March 11, 2017 1:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] accessible program that will allow you to restore yoursound profile

 

I think the original poster was looking for a way to set different volume levels for multiple, different devices at the touch of a keystroke.

 

Stay well

 

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

On 2017-03-11 18:09, David Griffith wrote:

 

I take a  slightly different approach to all this.

 

I used to try various utilities to try and prevent Windows loading in amuted state or with volume set to zero.

 

Nowadays I do not bother as I routinely use a Microsoft Natural Ergononic  Keyboard  which have clearly tactile media keys including   toglling mute status or volume up and down. Even if the computer is muted a press of the volume up key will unmute the computer.

Many laptops  will also have media keys which presumably perform the same function.

 

If for whatever reason I need to  adjust volumes across the programs loaded I simply press windows key and type sndvol  which opens up a mixer page which does pretty much all of what is described in the third party utility programs in windos already.

 

David ?Griffith

 

 

 

 

 

Sent from Mail for Windows 10

 

From: Jacob Kruger
Sent: 11 March 2017 14:37
To: nvda@nvda.groups.io
Subject: Re: [nvda] accessible program that will allow you to restore yoursound profile

 

A utility app called sound volume view _might_help out here, but, that's

just a guess from description - see below.

 

Haven't even tested/tried it out, but, either way, here's the

download/detail page - the second and third links below the primary

headings on this page offer download of 32 bit and 64 bit versions:

http://www.nirsoft.net/utils/sound_volume_view.html

 

Description

SoundVolumeView is a simple tool for Windows Vista/7/8/2008/10 that

displays general information and current volume level for all active

sound components on your system, and allows you to mute and unmute them

instantly.

SoundVolumeView also allows you to save a sound profile into a file,

containing the current volume level and the mute/unmute state of all

sound components, as well as the default sound devices, and then later,

load the same file to restore exactly the same volume levels and settings.

There is also extensive command-line support, which allows you to

save/load profiles, change current volume of every sound component, and

mute/unmute every sound component, without displaying any user interface.

System Requirements

This utility works on Windows Vista, Windows 7, Windows 8, Windows 2008,

and Windows 10. Both 32-bit and 64-bit systems are supported.

Windows XP and older systems are not supported.

 

Jacob Kruger

Blind Biker

Skype: BlindZA

"Resistance is futile, but, acceptance is versatile..."

 

On 2017-03-11 14:06, Brian's Mail list account wrote:

> I did some years back and they said it was not possible in the new

> sound schemes. However that may well have been that they lost

> interest, who knows?

> Brian

> bglists@...

> Sent via blueyonder.

> Please address personal email to:-

> briang1@..., putting 'Brian Gaff'

> in the display name field.

> ----- Original Message ----- From: "Dennis L" <dennisl1982@...>

> To: <nvda@nvda.groups.io>

> Sent: Saturday, March 11, 2017 3:16 AM

> Subject: Re: [nvda] accessible program that will allow you to restore

> your sound profile

>> Have you contacted them?  Have you tried it with windows7?

>> 

>> 

>> 

>> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of

>> Roger

>> Stewart

>> Sent: Friday, March 10, 2017 4:40 PM

>> To: nvda@nvda.groups.io

>> Subject: Re: [nvda] accessible program that will allow you to restore

>> your

>> sound profile

>> 

>> 

>> 

>> This is called Quick Mix.  However, it stopped working when I went to

>> Win 7

>> so I don't use it now.  It was great, very accessible and easy to

>> use. Wish

>> the developers would make a new version of it.

>> 

>> 

>> Roger

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> On 3/10/2017 2:00 PM, Dennis L wrote:

>> 

>> There was a program that worked on xp that allowed you to restore your

>> volume levels.  I can't remember what it was.

>> 

>> 

>> 

>> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of

>> Jacob

>> Kruger

>> Sent: Friday, March 10, 2017 2:44 PM

>> To: nvda@nvda.groups.io

>> Subject: Re: [nvda] accessible program that will allow you to restore

>> your

>> sound profile

>> 

>> 

>> 

>> Don't think so - it just offers overall master volume recovery, so

>> that if

>> something else lowers your volume below a certain level, it will restore

>> master volume to a pre-defined level.

>> 

>> 

>> 

>> Stay well

>> 

>> 

>> 

>> Jacob Kruger

>> Blind Biker

>> Skype: BlindZA

>> "Resistance is futile, but, acceptance is versatile..."

>> 

>> On 2017-03-10 21:31, Dennis L wrote:

>> 

>> I am not seeing how you would tell it to restore the volume level? 

>> Will it

>> let you have one if a headset is plugged in and one for your speakers?

>> 

>> 

>> 

>> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of

>> Jacob

>> Kruger

>> Sent: Friday, March 10, 2017 12:30 PM

>> To: nvda@nvda.groups.io

>> Subject: Re: [nvda] accessible program that will allow you to restore

>> your

>> sound profile

>> 

>> 

>> 

>> Dennis, while this doesn't really implement a hotkey to do it, it can

>> automatically restore your sound levels, etc. - the stascom utility

>> suite

>> from the following page:

>> 

>> https://www.stascom.co.za/stascom.html#content

>> 

>> 

>> 

>> Also offers some other utility functions - check out the documentation.

>> 

>> 

>> 

>> Stay well

>> 

>> 

>> 

>> Jacob Kruger

>> Blind Biker

>> Skype: BlindZA

>> "Resistance is futile, but, acceptance is versatile..."

>> 

>> On 2017-03-10 11:54, Dennis L wrote:

>> 

>> Hi, there was a program for windows xp that you could set a key

>> command and

>> restore your sound profile is there such a program for windows 7?

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>

 

 

 

 

 

 



Re: accessible program that will allow you to restore yoursound profile

Dennis L <dennisl1982@...>
 

I think I am missing something I am not sure what however.  I thought I saved the profile but I can’t get it to open.  If someone could look and possibly see what I am doing wrong I would appreciate it.

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jacob Kruger
Sent: Sunday, March 12, 2017 6:51 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] accessible program that will allow you to restore yoursound profile

 

It runs/launches, but, haven't tried out the profiles - not much use to me, but, give it a go yourself?

 

For example, since it offers command line commands, etc., you might be able to define multiple profiles, and, link to them via desktop shortcuts, that you could then assign shortcut keys to?

 

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

On 2017-03-12 12:13, Dennis L wrote:

Have you had a chance to test this?

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jacob Kruger
Sent: Saturday, March 11, 2017 1:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] accessible program that will allow you to restore yoursound profile

 

I think the original poster was looking for a way to set different volume levels for multiple, different devices at the touch of a keystroke.

 

Stay well

 

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

On 2017-03-11 18:09, David Griffith wrote:

 

I take a  slightly different approach to all this.

 

I used to try various utilities to try and prevent Windows loading in amuted state or with volume set to zero.

 

Nowadays I do not bother as I routinely use a Microsoft Natural Ergononic  Keyboard  which have clearly tactile media keys including   toglling mute status or volume up and down. Even if the computer is muted a press of the volume up key will unmute the computer.

Many laptops  will also have media keys which presumably perform the same function.

 

If for whatever reason I need to  adjust volumes across the programs loaded I simply press windows key and type sndvol  which opens up a mixer page which does pretty much all of what is described in the third party utility programs in windos already.

 

David ?Griffith

 

 

 

 

 

Sent from Mail for Windows 10

 

From: Jacob Kruger
Sent: 11 March 2017 14:37
To: nvda@nvda.groups.io
Subject: Re: [nvda] accessible program that will allow you to restore yoursound profile

 

A utility app called sound volume view _might_help out here, but, that's

just a guess from description - see below.

 

Haven't even tested/tried it out, but, either way, here's the

download/detail page - the second and third links below the primary

headings on this page offer download of 32 bit and 64 bit versions:

http://www.nirsoft.net/utils/sound_volume_view.html

 

Description

SoundVolumeView is a simple tool for Windows Vista/7/8/2008/10 that

displays general information and current volume level for all active

sound components on your system, and allows you to mute and unmute them

instantly.

SoundVolumeView also allows you to save a sound profile into a file,

containing the current volume level and the mute/unmute state of all

sound components, as well as the default sound devices, and then later,

load the same file to restore exactly the same volume levels and settings.

There is also extensive command-line support, which allows you to

save/load profiles, change current volume of every sound component, and

mute/unmute every sound component, without displaying any user interface.

System Requirements

This utility works on Windows Vista, Windows 7, Windows 8, Windows 2008,

and Windows 10. Both 32-bit and 64-bit systems are supported.

Windows XP and older systems are not supported.

 

Jacob Kruger

Blind Biker

Skype: BlindZA

"Resistance is futile, but, acceptance is versatile..."

 

On 2017-03-11 14:06, Brian's Mail list account wrote:

> I did some years back and they said it was not possible in the new

> sound schemes. However that may well have been that they lost

> interest, who knows?

> Brian

> bglists@...

> Sent via blueyonder.

> Please address personal email to:-

> briang1@..., putting 'Brian Gaff'

> in the display name field.

> ----- Original Message ----- From: "Dennis L" <dennisl1982@...>

> To: <nvda@nvda.groups.io>

> Sent: Saturday, March 11, 2017 3:16 AM

> Subject: Re: [nvda] accessible program that will allow you to restore

> your sound profile

>> Have you contacted them?  Have you tried it with windows7?

>> 

>> 

>> 

>> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of

>> Roger

>> Stewart

>> Sent: Friday, March 10, 2017 4:40 PM

>> To: nvda@nvda.groups.io

>> Subject: Re: [nvda] accessible program that will allow you to restore

>> your

>> sound profile

>> 

>> 

>> 

>> This is called Quick Mix.  However, it stopped working when I went to

>> Win 7

>> so I don't use it now.  It was great, very accessible and easy to

>> use. Wish

>> the developers would make a new version of it.

>> 

>> 

>> Roger

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> On 3/10/2017 2:00 PM, Dennis L wrote:

>> 

>> There was a program that worked on xp that allowed you to restore your

>> volume levels.  I can't remember what it was.

>> 

>> 

>> 

>> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of

>> Jacob

>> Kruger

>> Sent: Friday, March 10, 2017 2:44 PM

>> To: nvda@nvda.groups.io

>> Subject: Re: [nvda] accessible program that will allow you to restore

>> your

>> sound profile

>> 

>> 

>> 

>> Don't think so - it just offers overall master volume recovery, so

>> that if

>> something else lowers your volume below a certain level, it will restore

>> master volume to a pre-defined level.

>> 

>> 

>> 

>> Stay well

>> 

>> 

>> 

>> Jacob Kruger

>> Blind Biker

>> Skype: BlindZA

>> "Resistance is futile, but, acceptance is versatile..."

>> 

>> On 2017-03-10 21:31, Dennis L wrote:

>> 

>> I am not seeing how you would tell it to restore the volume level? 

>> Will it

>> let you have one if a headset is plugged in and one for your speakers?

>> 

>> 

>> 

>> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of

>> Jacob

>> Kruger

>> Sent: Friday, March 10, 2017 12:30 PM

>> To: nvda@nvda.groups.io

>> Subject: Re: [nvda] accessible program that will allow you to restore

>> your

>> sound profile

>> 

>> 

>> 

>> Dennis, while this doesn't really implement a hotkey to do it, it can

>> automatically restore your sound levels, etc. - the stascom utility

>> suite

>> from the following page:

>> 

>> https://www.stascom.co.za/stascom.html#content

>> 

>> 

>> 

>> Also offers some other utility functions - check out the documentation.

>> 

>> 

>> 

>> Stay well

>> 

>> 

>> 

>> Jacob Kruger

>> Blind Biker

>> Skype: BlindZA

>> "Resistance is futile, but, acceptance is versatile..."

>> 

>> On 2017-03-10 11:54, Dennis L wrote:

>> 

>> Hi, there was a program for windows xp that you could set a key

>> command and

>> restore your sound profile is there such a program for windows 7?

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>

 

 

 

 

 

 


Re: accessible program that will allow you to restore yoursound profile

Dennis L <dennisl1982@...>
 

I have tried it I couldn’t work I’m not sure if it’s user error.  Would you be willing to try it to see if I am possibly doing something wrong?

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jacob Kruger
Sent: Sunday, March 12, 2017 6:51 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] accessible program that will allow you to restore yoursound profile

 

It runs/launches, but, haven't tried out the profiles - not much use to me, but, give it a go yourself?

 

For example, since it offers command line commands, etc., you might be able to define multiple profiles, and, link to them via desktop shortcuts, that you could then assign shortcut keys to?

 

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

On 2017-03-12 12:13, Dennis L wrote:

Have you had a chance to test this?

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jacob Kruger
Sent: Saturday, March 11, 2017 1:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] accessible program that will allow you to restore yoursound profile

 

I think the original poster was looking for a way to set different volume levels for multiple, different devices at the touch of a keystroke.

 

Stay well

 

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

On 2017-03-11 18:09, David Griffith wrote:

 

I take a  slightly different approach to all this.

 

I used to try various utilities to try and prevent Windows loading in amuted state or with volume set to zero.

 

Nowadays I do not bother as I routinely use a Microsoft Natural Ergononic  Keyboard  which have clearly tactile media keys including   toglling mute status or volume up and down. Even if the computer is muted a press of the volume up key will unmute the computer.

Many laptops  will also have media keys which presumably perform the same function.

 

If for whatever reason I need to  adjust volumes across the programs loaded I simply press windows key and type sndvol  which opens up a mixer page which does pretty much all of what is described in the third party utility programs in windos already.

 

David ?Griffith

 

 

 

 

 

Sent from Mail for Windows 10

 

From: Jacob Kruger
Sent: 11 March 2017 14:37
To: nvda@nvda.groups.io
Subject: Re: [nvda] accessible program that will allow you to restore yoursound profile

 

A utility app called sound volume view _might_help out here, but, that's

just a guess from description - see below.

 

Haven't even tested/tried it out, but, either way, here's the

download/detail page - the second and third links below the primary

headings on this page offer download of 32 bit and 64 bit versions:

http://www.nirsoft.net/utils/sound_volume_view.html

 

Description

SoundVolumeView is a simple tool for Windows Vista/7/8/2008/10 that

displays general information and current volume level for all active

sound components on your system, and allows you to mute and unmute them

instantly.

SoundVolumeView also allows you to save a sound profile into a file,

containing the current volume level and the mute/unmute state of all

sound components, as well as the default sound devices, and then later,

load the same file to restore exactly the same volume levels and settings.

There is also extensive command-line support, which allows you to

save/load profiles, change current volume of every sound component, and

mute/unmute every sound component, without displaying any user interface.

System Requirements

This utility works on Windows Vista, Windows 7, Windows 8, Windows 2008,

and Windows 10. Both 32-bit and 64-bit systems are supported.

Windows XP and older systems are not supported.

 

Jacob Kruger

Blind Biker

Skype: BlindZA

"Resistance is futile, but, acceptance is versatile..."

 

On 2017-03-11 14:06, Brian's Mail list account wrote:

> I did some years back and they said it was not possible in the new

> sound schemes. However that may well have been that they lost

> interest, who knows?

> Brian

> bglists@...

> Sent via blueyonder.

> Please address personal email to:-

> briang1@..., putting 'Brian Gaff'

> in the display name field.

> ----- Original Message ----- From: "Dennis L" <dennisl1982@...>

> To: <nvda@nvda.groups.io>

> Sent: Saturday, March 11, 2017 3:16 AM

> Subject: Re: [nvda] accessible program that will allow you to restore

> your sound profile

>> Have you contacted them?  Have you tried it with windows7?

>> 

>> 

>> 

>> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of

>> Roger

>> Stewart

>> Sent: Friday, March 10, 2017 4:40 PM

>> To: nvda@nvda.groups.io

>> Subject: Re: [nvda] accessible program that will allow you to restore

>> your

>> sound profile

>> 

>> 

>> 

>> This is called Quick Mix.  However, it stopped working when I went to

>> Win 7

>> so I don't use it now.  It was great, very accessible and easy to

>> use. Wish

>> the developers would make a new version of it.

>> 

>> 

>> Roger

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> On 3/10/2017 2:00 PM, Dennis L wrote:

>> 

>> There was a program that worked on xp that allowed you to restore your

>> volume levels.  I can't remember what it was.

>> 

>> 

>> 

>> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of

>> Jacob

>> Kruger

>> Sent: Friday, March 10, 2017 2:44 PM

>> To: nvda@nvda.groups.io

>> Subject: Re: [nvda] accessible program that will allow you to restore

>> your

>> sound profile

>> 

>> 

>> 

>> Don't think so - it just offers overall master volume recovery, so

>> that if

>> something else lowers your volume below a certain level, it will restore

>> master volume to a pre-defined level.

>> 

>> 

>> 

>> Stay well

>> 

>> 

>> 

>> Jacob Kruger

>> Blind Biker

>> Skype: BlindZA

>> "Resistance is futile, but, acceptance is versatile..."

>> 

>> On 2017-03-10 21:31, Dennis L wrote:

>> 

>> I am not seeing how you would tell it to restore the volume level? 

>> Will it

>> let you have one if a headset is plugged in and one for your speakers?

>> 

>> 

>> 

>> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of

>> Jacob

>> Kruger

>> Sent: Friday, March 10, 2017 12:30 PM

>> To: nvda@nvda.groups.io

>> Subject: Re: [nvda] accessible program that will allow you to restore

>> your

>> sound profile

>> 

>> 

>> 

>> Dennis, while this doesn't really implement a hotkey to do it, it can

>> automatically restore your sound levels, etc. - the stascom utility

>> suite

>> from the following page:

>> 

>> https://www.stascom.co.za/stascom.html#content

>> 

>> 

>> 

>> Also offers some other utility functions - check out the documentation.

>> 

>> 

>> 

>> Stay well

>> 

>> 

>> 

>> Jacob Kruger

>> Blind Biker

>> Skype: BlindZA

>> "Resistance is futile, but, acceptance is versatile..."

>> 

>> On 2017-03-10 11:54, Dennis L wrote:

>> 

>> Hi, there was a program for windows xp that you could set a key

>> command and

>> restore your sound profile is there such a program for windows 7?

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>

 

 

 

 

 

 


Re: accessible program that will allow you to restore yoursound profile

Jacob Kruger
 

It runs/launches, but, haven't tried out the profiles - not much use to me, but, give it a go yourself?


For example, since it offers command line commands, etc., you might be able to define multiple profiles, and, link to them via desktop shortcuts, that you could then assign shortcut keys to?


Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."
On 2017-03-12 12:13, Dennis L wrote:

Have you had a chance to test this?

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of Jacob Kruger
Sent: Saturday, March 11, 2017 1:09 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] accessible program that will allow you to restore yoursound profile

 

I think the original poster was looking for a way to set different volume levels for multiple, different devices at the touch of a keystroke.

 

Stay well

 

Jacob Kruger
Blind Biker
Skype: BlindZA
"Resistance is futile, but, acceptance is versatile..."

On 2017-03-11 18:09, David Griffith wrote:

 

I take a  slightly different approach to all this.

 

I used to try various utilities to try and prevent Windows loading in amuted state or with volume set to zero.

 

Nowadays I do not bother as I routinely use a Microsoft Natural Ergononic  Keyboard  which have clearly tactile media keys including   toglling mute status or volume up and down. Even if the computer is muted a press of the volume up key will unmute the computer.

Many laptops  will also have media keys which presumably perform the same function.

 

If for whatever reason I need to  adjust volumes across the programs loaded I simply press windows key and type sndvol  which opens up a mixer page which does pretty much all of what is described in the third party utility programs in windos already.

 

David ?Griffith

 

 

 

 

 

Sent from Mail for Windows 10

 

From: Jacob Kruger
Sent: 11 March 2017 14:37
To: nvda@nvda.groups.io
Subject: Re: [nvda] accessible program that will allow you to restore yoursound profile

 

A utility app called sound volume view _might_help out here, but, that's

just a guess from description - see below.

 

Haven't even tested/tried it out, but, either way, here's the

download/detail page - the second and third links below the primary

headings on this page offer download of 32 bit and 64 bit versions:

http://www.nirsoft.net/utils/sound_volume_view.html

 

Description

SoundVolumeView is a simple tool for Windows Vista/7/8/2008/10 that

displays general information and current volume level for all active

sound components on your system, and allows you to mute and unmute them

instantly.

SoundVolumeView also allows you to save a sound profile into a file,

containing the current volume level and the mute/unmute state of all

sound components, as well as the default sound devices, and then later,

load the same file to restore exactly the same volume levels and settings.

There is also extensive command-line support, which allows you to

save/load profiles, change current volume of every sound component, and

mute/unmute every sound component, without displaying any user interface.

System Requirements

This utility works on Windows Vista, Windows 7, Windows 8, Windows 2008,

and Windows 10. Both 32-bit and 64-bit systems are supported.

Windows XP and older systems are not supported.

 

Jacob Kruger

Blind Biker

Skype: BlindZA

"Resistance is futile, but, acceptance is versatile..."

 

On 2017-03-11 14:06, Brian's Mail list account wrote:

> I did some years back and they said it was not possible in the new

> sound schemes. However that may well have been that they lost

> interest, who knows?

> Brian

> bglists@...

> Sent via blueyonder.

> Please address personal email to:-

> briang1@..., putting 'Brian Gaff'

> in the display name field.

> ----- Original Message ----- From: "Dennis L" <dennisl1982@...>

> To: <nvda@nvda.groups.io>

> Sent: Saturday, March 11, 2017 3:16 AM

> Subject: Re: [nvda] accessible program that will allow you to restore

> your sound profile

>> Have you contacted them?  Have you tried it with windows7?

>> 

>> 

>> 

>> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of

>> Roger

>> Stewart

>> Sent: Friday, March 10, 2017 4:40 PM

>> To: nvda@nvda.groups.io

>> Subject: Re: [nvda] accessible program that will allow you to restore

>> your

>> sound profile

>> 

>> 

>> 

>> This is called Quick Mix.  However, it stopped working when I went to

>> Win 7

>> so I don't use it now.  It was great, very accessible and easy to

>> use. Wish

>> the developers would make a new version of it.

>> 

>> 

>> Roger

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> On 3/10/2017 2:00 PM, Dennis L wrote:

>> 

>> There was a program that worked on xp that allowed you to restore your

>> volume levels.  I can't remember what it was.

>> 

>> 

>> 

>> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of

>> Jacob

>> Kruger

>> Sent: Friday, March 10, 2017 2:44 PM

>> To: nvda@nvda.groups.io

>> Subject: Re: [nvda] accessible program that will allow you to restore

>> your

>> sound profile

>> 

>> 

>> 

>> Don't think so - it just offers overall master volume recovery, so

>> that if

>> something else lowers your volume below a certain level, it will restore

>> master volume to a pre-defined level.

>> 

>> 

>> 

>> Stay well

>> 

>> 

>> 

>> Jacob Kruger

>> Blind Biker

>> Skype: BlindZA

>> "Resistance is futile, but, acceptance is versatile..."

>> 

>> On 2017-03-10 21:31, Dennis L wrote:

>> 

>> I am not seeing how you would tell it to restore the volume level? 

>> Will it

>> let you have one if a headset is plugged in and one for your speakers?

>> 

>> 

>> 

>> From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of

>> Jacob

>> Kruger

>> Sent: Friday, March 10, 2017 12:30 PM

>> To: nvda@nvda.groups.io

>> Subject: Re: [nvda] accessible program that will allow you to restore

>> your

>> sound profile

>> 

>> 

>> 

>> Dennis, while this doesn't really implement a hotkey to do it, it can

>> automatically restore your sound levels, etc. - the stascom utility

>> suite

>> from the following page:

>> 

>> https://www.stascom.co.za/stascom.html#content

>> 

>> 

>> 

>> Also offers some other utility functions - check out the documentation.

>> 

>> 

>> 

>> Stay well

>> 

>> 

>> 

>> Jacob Kruger

>> Blind Biker

>> Skype: BlindZA

>> "Resistance is futile, but, acceptance is versatile..."

>> 

>> On 2017-03-10 11:54, Dennis L wrote:

>> 

>> Hi, there was a program for windows xp that you could set a key

>> command and

>> restore your sound profile is there such a program for windows 7?

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>> 

>