Date   

Re: Unable to connect to NVDA Remote Server

arqam mehmood
 

Well, Thanks a lot for your help.
you really helped me a lot.

On 7/26/21, Mobeen Iqbal <mobeeniqbal@gmail.com> wrote:
Hi.

I am not sure if the following would work for you, but you could give it
a try.

Open notepad, press control O and paste the following path.

%appdata%\nvda\addons\remote\globalPlugins\remoteClient\configuration.py

Press enter. The configuration file should open. The line you're looking
for is:


port = integer(default=6837)

If you try changing the port number on that line, it may solve your
problem. It may also be worth checking the file for any other references
to the port. That's the only place I can think of where you could make
the changes to not expose your port numbers.

I hope that works for you.

Very best wishes,

Mo.


On 26/07/2021 17:11, arqam mehmood wrote:
oh, so, if I dont want to expose my port to public, is there any way to do
this?

On 7/26/21, Mobeen Iqbal <mobeeniqbal@gmail.com> wrote:
Hi.

Sorry for not replying to this sooner. When you need to change the port,
you enter your hostname plus the port number as follows.

nvdaremote.com:1234

The numbers are your port number. So if your IP was:

88.88.88.88,

In the host box, you would enter:

88.88.88.88:1234

Very best wishes,

Mo.


On 23/07/2021 07:33, arqam mehmood wrote:
Hi.
I didn't find anything like this, can you help me?

On 7/23/21, Mobeen Iqbal <mobeeniqbal@gmail.com> wrote:
Hi.

Don't you also have to specify the port in the add-on configuration?
Unless you also change it in the code, it probably won't work. There
should be something in the documentation on how to specify the correct
port on the client side.

Cheers,

Mo.


On 22/07/2021 14:32, Mobeen Iqbal via groups.io wrote:
Hi.

Are the correct ports open and accessible? I believe port 6837 needs
to be open.

cheers,

Mo.


On 22/07/2021 08:20, arqam mehmood wrote:
Hi everyone.
I've recently installed NVDA Remote Server on my debian server.
everything is ok.
when i check sudo NVDARemoteServer status.
  it says, active.
but when I tried to connect through my client, it won't connect.
any idea what is the problem?
Arqam Mehmood.


















Re: NVDA announces O'clock

 

Sascha,

Or, if it's only for full hours, the replacement could be "\1 hundred hours" if you want to go "full military."

And if you wanted to get anal retentive, the pattern could be:  ([0,1][0-9]|2[0-3]):([0-5][0-9]):([0-5][0-9])
with the replacement being: \1, \2, and \3 seconds

So 16:45:12 would read as sixteen, forty-five, and 12 seconds

And it could get even crazier if you wanted any two digits that begin with a zero to be read as zero followed by the single digit and similar.  Regular expressions are hard but natural language is harder!!
--

Brian - Windows 10, 64-Bit, Version 21H1, Build 19043  

Yep.  Discipline.  Accountability.  Joy.  Fun.  Responsibility.

That's what life is about.  And in that order.

        ~ Liza Minnelli

 


Re: NVDA announces O'clock

Sascha Cowley
 

This is a feature of your speech synthesiser, not of NVDA itself. There may be an option in your synth to control this, or, alternatively, you could create a regular expression speech dictionary entry to circumvent this behaviour. A pattern such as "([0,1][0-9]|2[0-3]):00:00" with replacement "\1 :00 :00" (note the spaces after the digits and before the colons) should probably work.


NVDA announces O'clock

dennis huckle
 

Hello all,

When, in notepad I am going through a list of radio programs and a program is shown as being on at 17:00:00 or any other hour nvda says “17 o’clock.

Can I stop this or is it just one of these things.

Its okay for radio programs but I may not want this feature for other programs.

Kind regards,

Dennis huckle

 


Re: Unable to connect to NVDA Remote Server

Mobeen Iqbal
 

Hi.

I am not sure if the following would work for you, but you could give it a try.

Open notepad, press control O and paste the following path.

%appdata%\nvda\addons\remote\globalPlugins\remoteClient\configuration.py

Press enter. The configuration file should open. The line you're looking for is:


port = integer(default=6837)

If you try changing the port number on that line, it may solve your problem. It may also be worth checking the file for any other references to the port. That's the only place I can think of where you could make the changes to not expose your port numbers.

I hope that works for you.

Very best wishes,

Mo.

On 26/07/2021 17:11, arqam mehmood wrote:
oh, so, if I dont want to expose my port to public, is there any way to do this?

On 7/26/21, Mobeen Iqbal <mobeeniqbal@gmail.com> wrote:
Hi.

Sorry for not replying to this sooner. When you need to change the port,
you enter your hostname plus the port number as follows.

nvdaremote.com:1234

The numbers are your port number. So if your IP was:

88.88.88.88,

In the host box, you would enter:

88.88.88.88:1234

Very best wishes,

Mo.


On 23/07/2021 07:33, arqam mehmood wrote:
Hi.
I didn't find anything like this, can you help me?

On 7/23/21, Mobeen Iqbal <mobeeniqbal@gmail.com> wrote:
Hi.

Don't you also have to specify the port in the add-on configuration?
Unless you also change it in the code, it probably won't work. There
should be something in the documentation on how to specify the correct
port on the client side.

Cheers,

Mo.


On 22/07/2021 14:32, Mobeen Iqbal via groups.io wrote:
Hi.

Are the correct ports open and accessible? I believe port 6837 needs
to be open.

cheers,

Mo.


On 22/07/2021 08:20, arqam mehmood wrote:
Hi everyone.
I've recently installed NVDA Remote Server on my debian server.
everything is ok.
when i check sudo NVDARemoteServer status.
  it says, active.
but when I tried to connect through my client, it won't connect.
any idea what is the problem?
Arqam Mehmood.













Re: Unable to connect to NVDA Remote Server

arqam mehmood
 

oh, so, if I dont want to expose my port to public, is there any way to do this?

On 7/26/21, Mobeen Iqbal <mobeeniqbal@gmail.com> wrote:
Hi.

Sorry for not replying to this sooner. When you need to change the port,
you enter your hostname plus the port number as follows.

nvdaremote.com:1234

The numbers are your port number. So if your IP was:

88.88.88.88,

In the host box, you would enter:

88.88.88.88:1234

Very best wishes,

Mo.


On 23/07/2021 07:33, arqam mehmood wrote:
Hi.
I didn't find anything like this, can you help me?

On 7/23/21, Mobeen Iqbal <mobeeniqbal@gmail.com> wrote:
Hi.

Don't you also have to specify the port in the add-on configuration?
Unless you also change it in the code, it probably won't work. There
should be something in the documentation on how to specify the correct
port on the client side.

Cheers,

Mo.


On 22/07/2021 14:32, Mobeen Iqbal via groups.io wrote:
Hi.

Are the correct ports open and accessible? I believe port 6837 needs
to be open.

cheers,

Mo.


On 22/07/2021 08:20, arqam mehmood wrote:
Hi everyone.
I've recently installed NVDA Remote Server on my debian server.
everything is ok.
when i check sudo NVDARemoteServer status.
  it says, active.
but when I tried to connect through my client, it won't connect.
any idea what is the problem?
Arqam Mehmood.
















Re: Possible conflicts between Phonetic Punctuation 1.5 and Speech History (2021.1 compatible version)?

 

Moderator's Note:  Subject modified to reflect the precise two add-ons referenced in the message body.  That's really important in a situation such as this.
--

Brian - Windows 10, 64-Bit, Version 21H1, Build 19043  

Yep.  Discipline.  Accountability.  Joy.  Fun.  Responsibility.

That's what life is about.  And in that order.

        ~ Liza Minnelli

 


Re: object enhancer addon

falkogiepmans@...
 

To be quite honest, we forgot that we had this add-on made. My own boss asked me the other day to look into a functionality to label objects in NVDA as they can do in JAWS, turns out we already had something on the table :).

I'll give it some love where needed, since it would be tremendously useful for our own work as well. If anyone has a pull-request that it wants to push then I will look into it.

Kind regards,
Falko

 
 


Re: Unable to connect to NVDA Remote Server

Mobeen Iqbal
 

Hi.

Sorry for not replying to this sooner. When you need to change the port, you enter your hostname plus the port number as follows.

nvdaremote.com:1234

The numbers are your port number. So if your IP was:

88.88.88.88,

In the host box, you would enter:

88.88.88.88:1234

Very best wishes,

Mo.

On 23/07/2021 07:33, arqam mehmood wrote:
Hi.
I didn't find anything like this, can you help me?

On 7/23/21, Mobeen Iqbal <mobeeniqbal@gmail.com> wrote:
Hi.

Don't you also have to specify the port in the add-on configuration?
Unless you also change it in the code, it probably won't work. There
should be something in the documentation on how to specify the correct
port on the client side.

Cheers,

Mo.


On 22/07/2021 14:32, Mobeen Iqbal via groups.io wrote:
Hi.

Are the correct ports open and accessible? I believe port 6837 needs
to be open.

cheers,

Mo.


On 22/07/2021 08:20, arqam mehmood wrote:
Hi everyone.
I've recently installed NVDA Remote Server on my debian server.
everything is ok.
when i check sudo NVDARemoteServer status.
  it says, active.
but when I tried to connect through my client, it won't connect.
any idea what is the problem?
Arqam Mehmood.











Re: Latest Update Of Weather Plus Version8.3X does Not work

Ron Canazzi
 

Hi Rui,

This works as it should; thanks much.


On 7/26/2021 6:33 AM, Rui Fontes wrote:

Chris, Andrea and Ron, please try this package:

https://github.com/ruifontes/Weather_Plus/releases/download/8.3/Weather_Plus8.3.nvda-addon


It is now the ofitial repository of Weather_Plus, since I'm taking care of bureaucratic work ...


Best regards,
 
Rui Fontes

Às 09:13 de 26/07/2021, Chris Mullins escreveu:

Hi

Yes, I get the same for all W+ shortcuts.  I also tried to check my city details were intact via the NVDA menus but the menu options within the add-on interface are unabailable.

 

Cheers

Chris

 

Sent from Mail for Windows 10

 

From: Ron Canazzi
Sent: 26 July 2021 02:26
To: NVDA Official Group
Subject: [nvda] Latest Update Of Weather Plus Version8.3X does Not work

 

Hi Group,

 

I got the update message to update Weather Plus 8.2x to 8.3X.  I

dutifully installed the software, restarted NVDA and now, when I press

the keystroke NVDA + W or any other associated Weather Plus keystroke,

nothing happens.

 

Does anyone else experience this issue?

 

--

Signature:

For a nation to admit it has done grevous wrongs and will strive to correct them for the betterment of all is no vice;

For a nation to claim it has always been great, needs no improvement  and to cling to its past achievements is no virtue!

 

 

 

 

 

 


-- 
Signature:
For a nation to admit it has done grevous wrongs and will strive to correct them for the betterment of all is no vice;
For a nation to claim it has always been great, needs no improvement  and to cling to its past achievements is no virtue!


Re: Latest Update Of Weather Plus Version8.3X does Not work

Adriano Barbieri
 

Hi,

remove, restart nvda and reinstall the add-on after verifying its removal.
Another thing, do you have installed any other add-ons that use the same key combination?

Il 26/07/2021 10:34, Chris Mullins ha scritto:

Hi Again

A slight amendment to my post, when I first navigated to the W+ addon menu, the options were available but when I chose “Manage Cities” nothing was displayed and the menu screen disappeared.  On subsequent re-entry, the addon menu options were unavailable.

 

Cheers

Chris

 

Sent from Mail for Windows 10

 

From: Christopher Mullins
Sent: 26 July 2021 09:13
To: nvda@nvda.groups.io
Subject: RE: [nvda] Latest Update Of Weather Plus Version8.3X does Not work

 

Hi

Yes, I get the same for all W+ shortcuts.  I also tried to check my city details were intact via the NVDA menus but the menu options within the add-on interface are unabailable.

 

Cheers

Chris

 

Sent from Mail for Windows 10

 

From: Ron Canazzi
Sent: 26 July 2021 02:26
To: NVDA Official Group
Subject: [nvda] Latest Update Of Weather Plus Version8.3X does Not work

 

Hi Group,

 

I got the update message to update Weather Plus 8.2x to 8.3X.  I

dutifully installed the software, restarted NVDA and now, when I press

the keystroke NVDA + W or any other associated Weather Plus keystroke,

nothing happens.

 

Does anyone else experience this issue?

 

--

Signature:

For a nation to admit it has done grevous wrongs and will strive to correct them for the betterment of all is no vice;

For a nation to claim it has always been great, needs no improvement  and to cling to its past achievements is no virtue!

 

 

 

 

 

 

 


Re: Latest Update Of Weather Plus Version8.3X does Not work

Chris Mullins
 

Hi Rui

This fixed it for me, thanks for your prompt response.

 

Cheers

Chris

 

Sent from Mail for Windows 10

 

From: Rui Fontes
Sent: 26 July 2021 11:33
To: nvda@nvda.groups.io
Subject: Re: [nvda] Latest Update Of Weather Plus Version8.3X does Not work

 

Chris, Andrea and Ron, please try this package:

https://github.com/ruifontes/Weather_Plus/releases/download/8.3/Weather_Plus8.3.nvda-addon

 

It is now the ofitial repository of Weather_Plus, since I'm taking care of bureaucratic work ...

 

Best regards,
 
Rui Fontes

Às 09:13 de 26/07/2021, Chris Mullins escreveu:

Hi

Yes, I get the same for all W+ shortcuts.  I also tried to check my city details were intact via the NVDA menus but the menu options within the add-on interface are unabailable.

 

Cheers

Chris

 

Sent from Mail for Windows 10

 

From: Ron Canazzi
Sent: 26 July 2021 02:26
To: NVDA Official Group
Subject: [nvda] Latest Update Of Weather Plus Version8.3X does Not work

 

Hi Group,

 

I got the update message to update Weather Plus 8.2x to 8.3X.  I

dutifully installed the software, restarted NVDA and now, when I press

the keystroke NVDA + W or any other associated Weather Plus keystroke,

nothing happens.

 

Does anyone else experience this issue?

 

--

Signature:

For a nation to admit it has done grevous wrongs and will strive to correct them for the betterment of all is no vice;

For a nation to claim it has always been great, needs no improvement  and to cling to its past achievements is no virtue!

 

 

 

 

 

 

 


Re: Latest Update Of Weather Plus Version8.3X does Not work

Adriano Barbieri
 

Hi to every body,

@Rui, the package downloaded automatically from Weather_Plus works, it doesn't depend on the package which is pretty much the same.
Rather I would first remove all versions of the add-on and reinstall it, you'll see that it works.

Tried!

Il 26/07/2021 12:33, Rui Fontes ha scritto:

Chris, Andrea and Ron, please try this package:

https://github.com/ruifontes/Weather_Plus/releases/download/8.3/Weather_Plus8.3.nvda-addon


It is now the ofitial repository of Weather_Plus, since I'm taking care of bureaucratic work ...


Best regards,
 
Rui Fontes

Às 09:13 de 26/07/2021, Chris Mullins escreveu:

Hi

Yes, I get the same for all W+ shortcuts.  I also tried to check my city details were intact via the NVDA menus but the menu options within the add-on interface are unabailable.

 

Cheers

Chris

 

Sent from Mail for Windows 10

 

From: Ron Canazzi
Sent: 26 July 2021 02:26
To: NVDA Official Group
Subject: [nvda] Latest Update Of Weather Plus Version8.3X does Not work

 

Hi Group,

 

I got the update message to update Weather Plus 8.2x to 8.3X.  I

dutifully installed the software, restarted NVDA and now, when I press

the keystroke NVDA + W or any other associated Weather Plus keystroke,

nothing happens.

 

Does anyone else experience this issue?

 

--

Signature:

For a nation to admit it has done grevous wrongs and will strive to correct them for the betterment of all is no vice;

For a nation to claim it has always been great, needs no improvement  and to cling to its past achievements is no virtue!

 

 

 

 

 

 


Re: Latest Update Of Weather Plus Version8.3X does Not work

Rui Fontes
 

Chris, Andrea and Ron, please try this package:

https://github.com/ruifontes/Weather_Plus/releases/download/8.3/Weather_Plus8.3.nvda-addon


It is now the ofitial repository of Weather_Plus, since I'm taking care of bureaucratic work ...


Best regards,
 
Rui Fontes

Às 09:13 de 26/07/2021, Chris Mullins escreveu:

Hi

Yes, I get the same for all W+ shortcuts.  I also tried to check my city details were intact via the NVDA menus but the menu options within the add-on interface are unabailable.

 

Cheers

Chris

 

Sent from Mail for Windows 10

 

From: Ron Canazzi
Sent: 26 July 2021 02:26
To: NVDA Official Group
Subject: [nvda] Latest Update Of Weather Plus Version8.3X does Not work

 

Hi Group,

 

I got the update message to update Weather Plus 8.2x to 8.3X.  I

dutifully installed the software, restarted NVDA and now, when I press

the keystroke NVDA + W or any other associated Weather Plus keystroke,

nothing happens.

 

Does anyone else experience this issue?

 

--

Signature:

For a nation to admit it has done grevous wrongs and will strive to correct them for the betterment of all is no vice;

For a nation to claim it has always been great, needs no improvement  and to cling to its past achievements is no virtue!

 

 

 

 

 

 


Possible conflicts between Phonetic Punctuation 1.5 and Speech History (2021.1 compatible version)?

majno
 

 Has anyone else found that Phonetic punctuation 1.3 to 1.5 blocks spech history 2021.1?
working on NVDA 2021.1.


Latest Update Of Weather Plus Version8.3X does Not work

Chris Mullins
 

Hi Again

A slight amendment to my post, when I first navigated to the W+ addon menu, the options were available but when I chose “Manage Cities” nothing was displayed and the menu screen disappeared.  On subsequent re-entry, the addon menu options were unavailable.

 

Cheers

Chris

 

Sent from Mail for Windows 10

 

From: Christopher Mullins
Sent: 26 July 2021 09:13
To: nvda@nvda.groups.io
Subject: RE: [nvda] Latest Update Of Weather Plus Version8.3X does Not work

 

Hi

Yes, I get the same for all W+ shortcuts.  I also tried to check my city details were intact via the NVDA menus but the menu options within the add-on interface are unabailable.

 

Cheers

Chris

 

Sent from Mail for Windows 10

 

From: Ron Canazzi
Sent: 26 July 2021 02:26
To: NVDA Official Group
Subject: [nvda] Latest Update Of Weather Plus Version8.3X does Not work

 

Hi Group,

 

I got the update message to update Weather Plus 8.2x to 8.3X.  I

dutifully installed the software, restarted NVDA and now, when I press

the keystroke NVDA + W or any other associated Weather Plus keystroke,

nothing happens.

 

Does anyone else experience this issue?

 

--

Signature:

For a nation to admit it has done grevous wrongs and will strive to correct them for the betterment of all is no vice;

For a nation to claim it has always been great, needs no improvement  and to cling to its past achievements is no virtue!

 

 

 

 

 

 

 


Re: Latest Update Of Weather Plus Version8.3X does Not work

Chris Mullins
 

Hi

Yes, I get the same for all W+ shortcuts.  I also tried to check my city details were intact via the NVDA menus but the menu options within the add-on interface are unabailable.

 

Cheers

Chris

 

Sent from Mail for Windows 10

 

From: Ron Canazzi
Sent: 26 July 2021 02:26
To: NVDA Official Group
Subject: [nvda] Latest Update Of Weather Plus Version8.3X does Not work

 

Hi Group,

 

I got the update message to update Weather Plus 8.2x to 8.3X.  I

dutifully installed the software, restarted NVDA and now, when I press

the keystroke NVDA + W or any other associated Weather Plus keystroke,

nothing happens.

 

Does anyone else experience this issue?

 

--

Signature:

For a nation to admit it has done grevous wrongs and will strive to correct them for the betterment of all is no vice;

For a nation to claim it has always been great, needs no improvement  and to cling to its past achievements is no virtue!

 

 

 

 

 

 


Add-on updates part 3: Windows App Essentials 21.08, several add-on support and compatibility notices #addonrelease

 

Hello all,

Windows App Essentials 21.08 is now available. This release includes localization updates and officially renames the add-on from Windows 10 App Essentials to Windows App Essentials. In addition:

  • First release to support Windows 10 21H2 (build 19044) and Server 2022 (build 20348).
  • Requires Windows 10 20H2 (October 2020 Update/build 19042) or later.
  • Experimental support for Windows 11 (build 22000) changes.
  • In some search fields, NVDA will announce suggestion count whenever you enter search terms.

IMPORTANT NOTICES:

  1. A future version of this add-on will require upcoming NVDA 2021.2 or later. This future update will be released shortly after 2021.2 stable version is released.
  2. At least one follow-up release will be made to respond to Windows 11 changes.
  3. Windows App Essentials add-on will support a given Windows 11 feature update for at least 18 months. This will guarantee support for at least two Windows 11 feature updates in a given add-on release in consideration for people who prefer to wait until moving on from one Windows 11 feature update to the next. Feature updates to Windows 10 will be supported for at least 12 months, and only the latest Windows Insider Preview build is supported.

As always, Windows App Essentials 21.08 is available from community add-ons website and from Add-on Updater.

Cheers,

Joseph


Add-on updates part 2: Resource Monitor 21.08, an important notice on NVDA compatibility in future releases #addonrelease

 

Hi all,

Resource Monitor 21.08 is now available. This release includes localization updates and:

  • Windows builds 20348 and 22000 are recognized as Windows Server 2022 and Windows 11, respectively.
  • On 64-bit systems, Windows version information will announce the type of processor the system is equipped with (either x64 (for Intel/AMD) or ARM64 (for Qualcomm Snapdragon processors)).

IMPORTANT COMPATIBILITY NOTICE: a future version of Resource Monitor will require NVDA 2021.2 or later due to changes introduced in recent NVDA versions that affects this add-on. This future version will be released shortly after NVDA 2021.2 stable version is released.

As always, Resource Monitor 21.08 is available from community add-ons website and from Add-on Updater.

Cheers,

Joseph


Add-on updates part 1: Control Usage Assistant, Enhanced Touch Gestures, GoldWave, StationPlaylist #addonrelease

 

Hello everyone,

If you are getting Add-on Updater notifications as you read this email, you are not alone:” several add-ons are being updated, including most of my add-ons.

The following add-ons received updates:

  • Control Usage Assistant 21.08: localization updates
  • Enhanced Touch Gestures 21.08 (localization updates, initial support for Windows 11)
  • GoldWave 21.08 (localization updates)
  • StationPlaylist 21.08 (localization updates, removing a debug tone for encoder support)

IMPORTANT: the next version of NVDA (2021.2) makes changes that will affect many add-ons. Therefore, future add-on releases from me will require NVDA 2021.2 shortly after the stable version is released, and until then, there will be no add-on updates. The only exception is Windows App Essentials (part 3 of add-on updates series) – at least one follow-up release will be made to respond to Windows 11 changes.

As always, these add-on updates (and others to follow) can be found from community add-ons website and via Add-on Updater.

Cheers,

Joseph

1 - 20 of 86465