Date   

Re: Contact

hurrikennyandopo ...
 

Hi


you could always Reset configuration to factory defaults in NVDA.


If you can get into the menus of NVDA by pressing the NVDA key + letter N then arr-owing down to that menu then pressing the enter key it will then put it back to when you first got it.


You will also when it has done it need to quit nvda then start it again. it will then give you the message like keyboard layout etc then after you have tabbed to the ok button then pressed the enter key it will be back to like when it was first installed.


But before you do that what else is it not doing? Is it like saying unknow or pane in all of your browsers? etc depending what it is doing could you say any other problems?


Gene nz


On 2/07/2019 2:16 PM, Ibrahim Ajayi wrote:
Hello:
Please I want to know if the NVDA screen reader can be repaired.  The
screen reader has been behaving abnormally for some time now.
It crashes unexpectedly, and some times does not make programs work.
When I am working on a website, the screen reader just stops talking,
creating problems for me, trying to figure out what might have gone
wrong.  When I try to find out what the problem is by pressing alt+tab
to switch programs, all I hear is unknown or icon icon.
Now when I get frustrated and I want to shut down the computer, I am
made to understand that a number of programs are not allowing windows
to shut down.
Are there any solutions to these problems?
I use windows 7 32 bit, and I have the latest version of NVDA.
Hope my problem is well understood.
Hope to read a response.
Ibrahim.



--
Check out my website for NVDA tutorials and other blindness related materials at http://www.accessibilitycentral.net

To find out which library networks in New Zealand have a copy of the NVDA screen reader on them and there library locations please go to http://www.accessibilitycentral.net/nz%20libraries%20with%20nvda.html
To find a NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.


Re: Contact

Quentin Christensen
 

Dear Ibrahim,

We've seen similar issues arise when programs have been installed or uninstalled - not every time, but occasionally.  There is a feature in NVDA to attempt to repair this.  If you can run NVDA, press NVDA+n, then T for Tools.  Then press R for "Run COM Registration fixing tool" and press ENTER twice to run this tool.  After running, and then rebooting your computer, ideally, the problem should be fixed.  Please do advise how you go with this.

Kind regards

Quentin.

On Tue, Jul 2, 2019 at 12:16 PM Ibrahim Ajayi <kobisko@...> wrote:
Hello:
Please I want to know if the NVDA screen reader can be repaired.  The
screen reader has been behaving abnormally for some time now.
It crashes unexpectedly, and some times does not make programs work.
When I am working on a website, the screen reader just stops talking,
creating problems for me, trying to figure out what might have gone
wrong.  When I try to find out what the problem is by pressing alt+tab
to switch programs, all I hear is unknown or icon icon.
Now when I get frustrated and I want to shut down the computer, I am
made to understand that a number of programs are not allowing windows
to shut down.
Are there any solutions to these problems?
I use windows 7 32 bit, and I have the latest version of NVDA.
Hope my problem is well understood.
Hope to read a response.
Ibrahim.





--
Quentin Christensen
Training and Support Manager

NVDA 2019.2beta1 now available!


Contact

Ibrahim Ajayi
 

Hello:
Please I want to know if the NVDA screen reader can be repaired. The
screen reader has been behaving abnormally for some time now.
It crashes unexpectedly, and some times does not make programs work.
When I am working on a website, the screen reader just stops talking,
creating problems for me, trying to figure out what might have gone
wrong. When I try to find out what the problem is by pressing alt+tab
to switch programs, all I hear is unknown or icon icon.
Now when I get frustrated and I want to shut down the computer, I am
made to understand that a number of programs are not allowing windows
to shut down.
Are there any solutions to these problems?
I use windows 7 32 bit, and I have the latest version of NVDA.
Hope my problem is well understood.
Hope to read a response.
Ibrahim.


locked Re: Reading past the visible screen on a CMD Window?

Tony Malykh
 

I haven't worked with npm, but it sounds like npm might be printing errors to stderr instead of stdout. Try:

npm start > filename.txt 2>&1


On 7/1/2019 10:12 AM, Brandon Keith Biggs wrote:
Hello,
I don't think npm errors can be written to a file, as they happen after the application has been started. If I try:

npm start > filename.txt

only the first line of NPM output is sent to the console. Then half a second later, the error comes and my console is all taken up with the error.

Is there a way to view what NVDA has said in the last few minutes? That would also help. I think NVDA reads the output, at least the top, which is the important part.
Thanks,

On Wed, Jun 5, 2019 at 12:18 PM Cohn, Jonathan <jcohn@...> wrote:
If you can find the scroll bar, you can probably scroll up a page and use the review cursor to examine the page. That being said, it is more efficient to work directly with either less or an editor and a log file.

The less command will allow you to use slash or question mark to search forward and backward through the file, and puts the result on the top line of the terminal window.


-----Original Message-----
From: Luke Davis <luke@...>
Sent: Tuesday, June 04, 2019 4:25 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Reading past the visible screen on a CMD Window?
Importance: Low

I don't know how to do this, but can't you pipe your compiler output through less?

npm --whatever 2>&1 | less

Luke

On Tue, 4 Jun 2019, Brandon Keith Biggs wrote:

> Hello,Does anyone know how to read past the visible screen or scroll
> windows CMD windows either using NVDA key commands, an addon, or some command in Windows?
> Normally I select all by going to the system menu and copy the whole buffer to the clipboard.
> I am currently using an SSH session in the Ubuntu emulator by Windows,
> and the system menu is not there. I'm doing NodeJS development over SSH and I really need to scroll past the visible window to read the start of the error.







locked Re: Reading past the visible screen on a CMD Window?

 

Brandon,
Is there a way to view what NVDA has said in the last few minutes? That would also help. I think NVDA reads the output, at least the top, which is the important part.
You can use the NVDA Speech Viewer.
Of course you would need to be with the dialog open before capturing the message.
Another solution is to use an add-on called Speech History, which will let you copy the most recent 100 items spoken by NVDA.
The use is as follows:
  • Shift+F11 - Move back through the history
  • Shift+F12 - Move forward
  •     F12 - Copy the selected item
Hth,
Cheers,
Marcio AKA Starboy

Sent from a galaxy far, far away.

--
Are you a Thunderbird user? Then join the Thunderbird mailing list to help and be helped with all Thunderbird things - questions, features, add-ons and much more!


locked Re: Reading past the visible screen on a CMD Window?

 

Hello,
I don't think npm errors can be written to a file, as they happen after the application has been started. If I try:

npm start > filename.txt

only the first line of NPM output is sent to the console. Then half a second later, the error comes and my console is all taken up with the error.

Is there a way to view what NVDA has said in the last few minutes? That would also help. I think NVDA reads the output, at least the top, which is the important part.
Thanks,

On Wed, Jun 5, 2019 at 12:18 PM Cohn, Jonathan <jcohn@...> wrote:
If you can find the scroll bar, you can probably scroll up a page and use the review cursor to examine the page. That being said, it is more efficient to work directly with either less or an editor and a log file.

The less command will allow you to use slash or question mark to search forward and backward through the file, and puts the result on the top line of the terminal window.


-----Original Message-----
From: Luke Davis <luke@...>
Sent: Tuesday, June 04, 2019 4:25 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Reading past the visible screen on a CMD Window?
Importance: Low

I don't know how to do this, but can't you pipe your compiler output through less?

npm --whatever 2>&1 | less

Luke

On Tue, 4 Jun 2019, Brandon Keith Biggs wrote:

> Hello,Does anyone know how to read past the visible screen or scroll
> windows CMD windows either using NVDA key commands, an addon, or some command in Windows?
> Normally I select all by going to the system menu and copy the whole buffer to the clipboard.
> I am currently using an SSH session in the Ubuntu emulator by Windows,
> and the system menu is not there. I'm doing NodeJS development over SSH and I really need to scroll past the visible window to read the start of the error.







Group Rules Reminder for nvda@nvda.groups.io

nvda@nvda.groups.io Group Moderators <nvda@...>
 

This is the NVDA Group Monthly Reminder Notice, which is meant to re-emphasize the NVDA Group Rules.

The central purpose of the NVDA Group is discussing how to use NVDA, either configuring NVDA's settings or familiarizing oneself with its modes and commands.  Discussions about which programs are accessible using NVDA, NVDA add-ons, NVDA tutorials and documentation, and configuring synthesizers or Braille displays for use with NVDA are also permitted.  Like all screen readers, it is a tool for accessing something else, and really serves no other purpose.  Its function as an accessibility tool is, of course, its reason for being.

It is presumed that the majority of members will be using NVDA, and possibly other screen readers, as part of their daily routine.  This being the case, before you post a message you have to consider whether the question you are about to ask is actually about NVDA itself, or about the program you’re using it to access.  Questions of the form, How do I use . . . with NVDA?, are very seldom about NVDA, but are almost always about the program being accessed with NVDA.

The NVDA Group has a Chat Subgroup (see: https://nvda.groups.io/g/chat, Group Email Addresses section) that has as its purpose the asking of virtually any “off-topic” question about anything you can think of, including just socializing.  It should be used for exactly that purpose. Only those who are already members of the NVDA Group can subscribe to the Chat Subgroup.  The Chat Subgroup has generally had technically focused topics related to using specific program features.

Before choosing where to post, please ask yourself the question, “Is what I’m about to ask or offer directly related to controlling or using NVDA, or whether a specific program is accessible with NVDA?”  If that can be answered, “Yes,” then post to the NVDA Group, and if the answer is, “No,” then the topic belongs in the NVDA Chat Subgroup.

In order to make your experience, and those of all other members, as pleasant as they can be, please follow these practices:

1.  Use threaded or conversation view in your e-mail client program or webmail and reading through the entirety of a topic before replying.  It gets you completely up to speed and avoids a lot of repetition.  If you choose not to use threaded/conversation view, please take the time to read through all messages from the group that are in your inbox prior to adding any reply to the group.  It’s the only way you can be sure you’re up to speed on any topic when not using threaded/conversation view.

2.  Reading through all new topics before replying, as topics have a tendency to get split upon occasion and often an answer ends up being in a separate topic.

3. If you have reason to believe your question has likely been asked and answered in the past please search the Group Archive first before asking it again.  Step-by-Step instructions for searching the group archive using the Groups.io search or a web search engine of your choosing: Searching_the_NVDA_Group_Archive.docx.  Please consider using a web search first for questions that have almost certainly been asked frequently and for which myriad answers, often in the form of tutorials, already exist.

4.  Think very carefully about the title you are going to give any topic you post.  The topic is the first (and, sometimes, only) thing a member sees and that may be how they decide if they’re going to look further.   Generic titles, such as “Help Me!,” are not helpful because they give no idea about what.  Compare that to something like, “NVDA not reading Excel cell contents,” or, “NVDA setting for pronouncing numbers,” where the exact issue where help is needed is front and center.   Even something like, “Need help with the following . . .,” lets the reader know that you are going to present a list of issues.

5.  Please avoid, “What is the best . . .?,” topics, because what qualifies as “best” is entirely subjective.   Topics of this sort are also always chat topics.  If you know you have specific needs then asking, “What {insert program type here} has the following features . . .,” is much more descriptive.   If you want to know what programs people like for a specific task, asking, “What’s your favorite . . . and why?,” is far more likely to get you the details you want to have.  Notice that none of the above questions ask about whether a program is accessible with NVDA.  If you’re asking something like, “Which {insert program class here} is accessible with NVDA?,” then it’s a main group topic.

6.  Any topic that is not about using NVDA to accomplish a task, or how to control NVDA, belongs in the chat subgroup, not the main group.  All questions about how to use the specific features of a program that you’re using NVDA to access, but not about NVDA itself, belong in the chat subgroup.

 

Respectful, even if slightly heated, disagreements will occur occasionally and will be tolerated provided what is described next does not occur.  Flaming, name calling, instigating arguments for their own sake that do nothing to advance anyone’s knowledge, pointed rudeness, and similar boorish behavior will not be tolerated.  If at any point one of you happens upon a message anywhere in the NVDA Group sphere, main or chat, that fits the preceding description then please report it to the group owner either via e-mail at, nvda+owner@nvda.groups.io, or, if you read via the web interface at https://nvda.groups.io/g/nvda/topics, then use the Report this message option that’s a part of the More button at the end of each message.  Please don’t add a protest message the topic.  If we receive a report and agree with it, the issue will be taken care of promptly.

 

If you find the amount of traffic from this Group, or any Groups.io group, overwhelming, then please download and read:

Controlling the Messages You Receive via E-Mail from Groups.io (docx)

Controlling the Messages You Receive via E-Mail from Groups.io (PDF)

Each of you has the ability to mute topics that don’t interest you, get digests instead of individual messages, or to set up topic preview for yourself via the Following Only and First Messages Also features used in conjunction with each other.  It is up to you to use those to manage your e-mail as you see fit.  It’s almost certain that there will be plenty of topics on the chat subgroup that will not be of the least interest to you as an individual. Setting up topic preview lets you pick and choose what you want to continue to see, and this function can be used on any Groups.io group.

 

Sincerely,

Nimer Jaber                                     Brian Vogel

 

NVDA Group Owner                      NVDA Group Moderator

 

To learn more about the nvda@nvda.groups.io group, please visit https://nvda.groups.io/g/nvda

To start sending messages to members of this group, simply send email to nvda@nvda.groups.io

If you do not wish to belong to nvda@nvda.groups.io, you may unsubscribe by sending an email to nvda+unsubscribe@nvda.groups.io

To see and modify all of your groups, go to https://groups.io


Re: Does Instant Translator still work?

Mallard
 

Thanks Brian. And, in passing, I like your signature!

Ciao,

Ollie

Il 29/06/2019 00:12, Brian Vogel ha scritto:
With regard to NVDA "Official" Add-Ons, there are two main pages one can go to for same:

Stable Versions: https://addons.nvda-project.org/index.en.html

Versions Under Development: https://addons.nvda-project.org/dev.en.html

There is some overlap between the content on those two pages, as many stable add-ons are also undergoing ongoing development. Those that are in earlier stages are only on the Under Development page.

It so happens that instantTranslate <https://addons.nvda-project.org/addons/instantTranslate.en.html> falls into the "under development" category and if you click through on the link you'll find the version if you search for the word "Changes," which lands you in the history area for the add-on.
--

Brian *-*Windows 10 Pro, 64-Bit, Version 1809, Build 17763

*/Puritanism:  The haunting fear that someone, somewhere, may be happy./*

        ~ H.L. Mencken


Re: Is there a podcast

Quentin Christensen
 

As noted, we haven't put out a podcast since late 2015.  In place of that, we have a fortnightly blog called "In-Process" which contains most of the news and information that we might otherwise put in a podcast.  You can find In-Process here:  https://www.nvaccess.org/category/in-process/

So I guess the other thing I'd ask, is there anything you feel would be better covered in a podcast format than the blog?  Or is there anything you'd like from a podcast that we're not providing already?

Off the top of my head, I can think of how in a podcast, we could more easily say "NVDA has a new feature, and here's what it sounds like...".  I've started experimenting with creating short videos recently.  The first one we've released is the "What is NVDA?" video which you can find here: https://www.youtube.com/watch?v=tCFyyqy9mqo  My thought is that using the blog, we could then say "NVDA has a new feature, here's a video demonstrating it" with a link to a youtube video.

Anyway, we're always keen to hear from people and what is wanted, so do please let me know.

Kind regards

Quentin.

On Sun, Jun 30, 2019 at 3:53 AM Irlanda Hernandez <sisterbear80@...> wrote:
Hi to you all!! Does nvda have a podcast? Thanks, and God bless





--
Quentin Christensen
Training and Support Manager

NVDA 2019.2beta1 now available!


Re: NVDA crash.

Arlene
 

Was it only for Eloquence?  I don’t have it on NVDA.  That explains why it did not crash for me.  I’m using E speak with what NVDA came with.  That’s all I’m using.  I’m using the latest build and windows ten. 

 

Sent from Mail for Windows 10

 

From: Sarah k Alawami
Sent: June 29, 2019 9:21 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA crash.

 

AAre you also usign eloquence? We've I think already confirmed it is a problem with a word, or something. If you are, contact code factory and se if they can fix it.

Take care and good luck.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.
For stuff we sell, mac training materials and  tutorials go here.
and for hosting options go here
to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Finally, to become a patron and help support the podcast go here

On 29 Jun 2019, at 21:09, Arlene wrote:

Confirm your problem. I am using google Chrome with the latest NVDA

 

Sent from Mail for Windows 10

 

From: Chantelle Buys
Sent: June 29, 2019 3:54 AM
To: nvda
Subject: [nvda] NVDA crash.

 

Afternoon everyone.

 

I've just come across a problem and after testing it on google chrome

and internet explorer I think that it may be NVDA.

 

I'm trying to read a chapter of a story but, halfway down NVDA would

restart. I don't know if it's because of the amount of text or what

but, I've never had this problem before.

 

The restarts happens when it gets to the line. "Things were taking a

dangerous turn.

Biggs picked up a branch that was tangled in the long-dried weeds that

Winston had eradicated."

 

Here's the link to the chapter

https://www.fanfiction.net/s/13258648/35/A-Quiet-Day

 

Can someone test it and see if their NVDA does this as well?

 

Thanks.

 

Chantelle

--

Never give up, at any cost.

 

 

 

 


Re: NVDA crash.

Arlene
 

, I’m using e speak on NVDA. I couldn’t confirm the problem.  I don’t have eloquence for NVDA. Only Jaws.  I’m using the latest build for NVDA and windows ten. 

 

Sent from Mail for Windows 10

 

From: Sarah k Alawami
Sent: June 29, 2019 9:21 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA crash.

 

AAre you also usign eloquence? We've I think already confirmed it is a problem with a word, or something. If you are, contact code factory and se if they can fix it.

Take care and good luck.

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.
For stuff we sell, mac training materials and  tutorials go here.
and for hosting options go here
to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Finally, to become a patron and help support the podcast go here

On 29 Jun 2019, at 21:09, Arlene wrote:

Confirm your problem. I am using google Chrome with the latest NVDA

 

Sent from Mail for Windows 10

 

From: Chantelle Buys
Sent: June 29, 2019 3:54 AM
To: nvda
Subject: [nvda] NVDA crash.

 

Afternoon everyone.

 

I've just come across a problem and after testing it on google chrome

and internet explorer I think that it may be NVDA.

 

I'm trying to read a chapter of a story but, halfway down NVDA would

restart. I don't know if it's because of the amount of text or what

but, I've never had this problem before.

 

The restarts happens when it gets to the line. "Things were taking a

dangerous turn.

Biggs picked up a branch that was tangled in the long-dried weeds that

Winston had eradicated."

 

Here's the link to the chapter

https://www.fanfiction.net/s/13258648/35/A-Quiet-Day

 

Can someone test it and see if their NVDA does this as well?

 

Thanks.

 

Chantelle

--

Never give up, at any cost.

 

 

 

 


Re: Pycharm with nvda

Jonathan COHN
 

I would recommend using a true text editor when working with Python  code. Notepad++ works fairly well. I have also heard good things about visual studio.

If you are throwing commands at python interpreter, the NVDA console could be used but there are several advantages to using an independent editor that also understands Python syntax.

 

From: <nvda@nvda.groups.io> on behalf of farhan israk <fahim.net.2014@...>
Reply-To: "nvda@nvda.groups.io" <nvda@nvda.groups.io>
Date: Saturday, June 29, 2019 at 2:51 PM
To: "nvda@nvda.groups.io" <nvda@nvda.groups.io>
Subject: [nvda] Pycharm with nvda

 

Which version of pycharm is accessible with nvda? I don't get sound feedback during writing code despite type word and character is on. Nvda doesn't read anything of menu bar.


moderated Re: Finding out of time in Nvda

Sarah k Alawami
 

How about nvda f12? Pressing this twice revieals the date as well.

Take care

Sarah Alawami, owner of TFFP. . For more info go to our website. This is also our libsyn page as well.
For stuff we sell, mac training materials and  tutorials go here.
and for hosting options go here
to subscribe to the feed click here

Our telegram channel is also a good place for an announce only in regard to podcasts, contests, etc.

Finally, to become a patron and help support the podcast go here

On 30 Jun 2019, at 4:51, Jarek.Krcmar wrote:

Hi group,

I would like to know whether exists a possibility to find out in Nvda the time.

Does exist an abbreviation for it?

--
Jarek


moderated Re: Finding out of time in Nvda

Samuel Kacer
 

Yeah, just press NVDA key + F12, by default.


moderated Re: Finding out of time in Nvda

 

And as a general helpful tip for this sort of thing, always check the Quick Commands Guide, which is simple when NVDA's running:

NVDA Key + N, H, Q   Opens the Quick Commands Reference in your default web browser.  Then search based on a keyword related to the command you're seeking.  Doing so for the word time takes you straight to the Report Date/Time command, which Monte's already given.
--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

The color of truth is grey.

           ~ André Gide

 

 


Re: Problem With Microsoft Insiders Page For Downloading and Testing The New Edge Browser

Kenny <kwashingtonbox@...>
 

Once you click on the Windows 10 button for download, scroll down to the bottom of page. You'll notice a link tagged "Accept and download." You click/press [Enter] on it to begin the download process. There are also two other check boxes for acceptance of terms (Which are checked as default) right above that link.


Whenever you encounter a situation when clicking on a link or button element on a webpage and nothing seems to happen, scroll down to the very bottom of the page. ([Ctrl+End]) Then start arrowing up to locate related information linked to what you clicked. You can also navigate to the very top of the page ([Ctrl+Home]) and start arrowing down. There's usually some sort of Html popover page that has been triggered that you need to interact with to continue the process.

On 6/29/2019 8:22 PM, Ron Canazzi wrote:
Hi Group,

To reproduce this issue:
1.  Visit https://www.microsoftedgeinsider.com/en-us/download/
2.  Navigate to the Dev (development version) the best stable version.
3.  There is a button associated with the download of this browser for Windows 10.
4.  Try activating it.
5.  The result is that whether you press enter, space bar or route review to the button and left click, nothing happens.

I would be interested to see if anyone else experiences the same issue.


moderated Re: Finding out of time in Nvda

Jarek.Krcmar
 

Hi Monte,

thank you for your information.

I am glad, it works.

Jarek

Dne 30.06.2019 v 13:55 Monte Single napsal(a):

Hold down the insert key and press f12 to hear the time.
Hold down the insert key and press f12 twice quickly and you will hear the
date.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Jarek.Krcmar
Sent: June-30-19 5:51 AM
To: nvda@nvda.groups.io
Subject: [nvda] Finding out of time in Nvda

Hi group,

I would like to know whether exists a possibility to find out in Nvda the
time.

Does exist an abbreviation for it?


--
Jarek





--
Jarek


moderated Re: Finding out of time in Nvda

Monte Single
 

Hold down the insert key and press f12 to hear the time.
Hold down the insert key and press f12 twice quickly and you will hear the
date.

-----Original Message-----
From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of
Jarek.Krcmar
Sent: June-30-19 5:51 AM
To: nvda@nvda.groups.io
Subject: [nvda] Finding out of time in Nvda

Hi group,

I would like to know whether exists a possibility to find out in Nvda the
time.

Does exist an abbreviation for it?


--
Jarek


moderated Finding out of time in Nvda

Jarek.Krcmar
 

Hi group,

I would like to know whether exists a possibility to find out in Nvda the time.

Does exist an abbreviation for it?


--
Jarek


Re: Problem With Microsoft Insiders Page For Downloading and Testing The New Edge Browser

Ron Canazzi
 

Hi Group,

Thanks for the heads up on this one. Usually, I'm pretty good at scopingout such issues, but this time, you had to read through the whole license agreement and then way at the very end was an actual link that said 'accept and download.'  A bit clumsy, but usable once you know what is going on.

On 6/29/2019 8:43 PM, Rui Fontes wrote:
Hello!

You wrote:
4.  Try activating it.
5.  The result is that whether you press enter, space bar or route review to the button and left click, nothing happens.
After that, press H and you will land in a section about licensing terms...
With Tab you will move to a link named Accept and download ...

Rui Fontes

I would be interested to see if anyone else experiences the same issue.

--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"