Date   

Re: chrome ??

Ian Westerland
 

Hello. When clicking a link use shift and enter.

To close the specific link without closing the Browser, control w.

Alt F4 closes the browser.

That is wha I use and I hope it helps you.

Cheers.


Ian Westerland

On 5/21/2019 8:51 AM, Danni wrote:
I'm having issues with internet explorer so am trying to use chrome but I can't figure out how to get out of a link?
I'm not sure how to word this correctly but basically if I use i/e or ff I can click a link and either click alt f4 "i/e" or alt key and close "ff" but can't seem to figure out a way to do that in chrome without closing the whole brouser?
am sure it's a simple thing but am blank?


Re: chrome ??

JM Casey
 

Ctrl-f4 will close a tab.

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Danni
Sent: May 20, 2019 6:51 PM
To: nvda@nvda.groups.io
Subject: [nvda] chrome ??

 

 

I'm having issues with internet explorer so am trying to use chrome but I can't figure out how to get out of a link?

 

I'm not sure how to word this correctly but basically if I use i/e or ff I can click a link and either click alt f4 "i/e" or alt key and close "ff" but can't seem to figure out a way to do that in chrome without closing the whole brouser?

 

am sure it's a simple thing but am blank?

 


chrome ??

Danni
 

 
I'm having issues with internet explorer so am trying to use chrome but I can't figure out how to get out of a link?
 
I'm not sure how to word this correctly but basically if I use i/e or ff I can click a link and either click alt f4 "i/e" or alt key and close "ff" but can't seem to figure out a way to do that in chrome without closing the whole brouser?
 
am sure it's a simple thing but am blank?
 


Re: NVDA will not recognize my registered Eloquence

mattias
 

Do you meen the codefactory addon?

 

Skickades från E-post för Windows 10

 

Från: Jackie
Skickat: den 20 maj 2019 19:54
Till: nvda@nvda.groups.io
Ämne: Re: [nvda] getting error message 4

 

You really need to take this up w/the folks you bought the product

from, Grant. In final analysis, they're likely the only ones who can

help, & definitively the ones who should.

 

On 5/20/19, Grant Metcalf <the.gems@...> wrote:

> HI list,

> While trying to install Eloquence voices I get the error 4 message which

> tells me I need to register. I have purchased the product and activated it

> on my Win7PC.  Can anybody tell me what the error 4 message means?

> Grant

> Listening for His shout!

>

 

 

--

Subscribe to a WordPress for Newbies Mailing List by sending a message to:

wp4newbs-request@... with 'subscribe' in the Subject field OR by

visiting the list page at http://www.freelists.org/list/wp4newbs

& check out my sites at www.brighter-vision.com & www.mysitesbeenhacked.com

 

 

 


Re: NVDA will not recognize my registered Eloquence

 

Grant,

           I have merged this topic back into your original one asking about the same issue.  Please, in the future, do not introduce new subject lines when talking about the same issue.  It breaks the topic threading both in e-mail clients and in the archive, making it more difficult for future searchers to find an entire conversation under a single topic, which is what's far preferable to split across topics.

           It is still entirely unclear exactly what is giving you the error message (that is, is it NVDA, Eloquence, Windows) and that's essential to know.   If it's not NVDA you will likely have to contact the vendor, though someone may be able to offer something more based on earlier similar experience.

           Unless this error message is coming from NVDA itself, and that seems doubtful, others have given you the correct advice:  this needs to be taken up with the technical support folks of the product giving the error message.  It's not an NVDA problem (or at least very unlikely to be one) if the genesis of the message is not NVDA.

--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

Puritanism:  The haunting fear that someone, somewhere, may be happy.

        ~ H.L. Mencken

 

 


Re: NVDA will not recognize my registered Eloquence

Jackie
 

You really need to take this up w/the folks you bought the product
from, Grant. In final analysis, they're likely the only ones who can
help, & definitively the ones who should.

On 5/20/19, Grant Metcalf <the.gems@att.net> wrote:
HI list,
While trying to install Eloquence voices I get the error 4 message which
tells me I need to register. I have purchased the product and activated it
on my Win7PC. Can anybody tell me what the error 4 message means?

Grant
Listening for His shout!



--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@freelists.org with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brighter-vision.com & www.mysitesbeenhacked.com


NVDA will not recognize my registered Eloquence

Grant Metcalf
 

HI list,
While trying to install Eloquence voices I get the error 4 message which tells me I need to register. I have purchased the product and activated it on my Win7PC.  Can anybody tell me what the error 4 message means?
 
Grant
Listening for His shout!
 


Re: NVDA will not recognize my registered Eloquence

Grant Metcalf
 

I have Sapi5 Eloquence. I have contacted A T Guys and their initial response did not work. I have also sent the below message to them as well.

Grant
Listening for His shout~!

From: Rui Fontes
Sent: Monday, May 20, 2019 7:36 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] NVDA will not recognize my registered Eloquence

Hello!

Firstly, are you talking of Eloquence SAPI5?
Secondly, are you checking if you are pasting the code in the right
place and without any space in the end?
Thirdly, you should contact A T Guys, and not the list...

Rui Fontes


Às 05:31 de 20/05/2019, Grant Metcalf escreveu:
*I have purchased Eloquence from A T Guys and registered it. When trying to install it in NVDA I keep getting the message I need to register my copy. When I enter the LicenseKey NVDA seems to be ignoring it and will not active the Eloquence program and voices. It did work during the trial period which has now expired. *
*QUESTION! What have I and/or my family members done wrong???!!!*
*Grumpy Grant*


Re: NVDA will not recognize my registered Eloquence

Rui Fontes
 

Hello!

Firstly, are you talking of Eloquence SAPI5?
Secondly, are you checking if you are pasting the code in the right place and without any space in the end?
Thirdly, you should contact A T Guys, and not the list...

Rui Fontes


Às 05:31 de 20/05/2019, Grant Metcalf escreveu:

*I have purchased Eloquence from A T Guys and registered it.  When trying to install it in NVDA I keep getting the message I need to register my copy. When I enter the LicenseKey NVDA seems to be ignoring it and will not active the Eloquence program and voices. It did work during the trial period which has now expired. *
*QUESTION! What have I and/or my family members done wrong???!!!*
*Grumpy Grant*


Re: NVDA Suddenly Silent after latest Win10 Cumulative Update

 

As a follow-up note on my own experience, I had not realized that when you plug in the HDMI cable Windows automatically switches audio output to the device associated with HDMI (which, of course, it has to do) but that it sometimes does not automatically switch it back to speakers/headphones when the HDMI cable is withdrawn.

I stumbled upon this by accident when I used HDMI again after this last incident.  If I go to the volume control in the system tray and open it, it was still showing the device as HDMI even after the cable was removed.  All I had to do was hit the dropdown for the device in volume control and switch it back to speakers/headphones and all was well.  This would not, however, be something simple for a screen reader user to do if the only output they had would be through the speakers/headphones, as you'd have no speech output to get you there.  Rebooting without the HDMI cable inserted makes the audio automatically redirect to an available device, in this case the speakers/headphones.

--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

Puritanism:  The haunting fear that someone, somewhere, may be happy.

        ~ H.L. Mencken

 

 


NVDA will not recognize my registered Eloquence

Grant Metcalf
 

I have purchased Eloquence from A T Guys and registered it.  When trying to install it in NVDA I keep getting the message I need to register my copy. When I enter the LicenseKey NVDA seems to be ignoring it and will not active the Eloquence program and voices. It did work during the trial period which has now expired.
QUESTION! What have I and/or my family members done wrong???!!!
 
Grumpy Grant
 


Configuration Files

Ed Marquette
 

In the list of configuration files that comes with NVDA, there is a configuration file called “Proofing.”
It does a great job in identifying various text and other attributes; however, if in Microsoft Word 2013, one uses automatic numbering created by custom-created styles (which I use daily), the paragraph numbers are omitted when reading; however, when reading with the “Normal” or “Default” configuration file activated, the paragraph numbers are read properly.
I suppose the answer to my question is for me to create my own “proof reading” configuration file.
Still, cutting off the automatically generated paragraph numbers seems odd.
I hope that, some day, I can contribute answers to this list instead of just questions.
Thanks for your assistance.


Re: NVDA Suddenly Silent after latest Win10 Cumulative Update

Mohd. Ahtesham Shaikh
 

Hi all,
Basically what happened with me is that moment I insert the headset jack into the slot, the sound would stop and not come through the headset.
I had to roll back to old windows and then start using NVDA through the headset.
However, it was working through the system speakers when the headset was removed.
Just sharing my experience after the update.

--
Mohd. Ahtesham
From India
Using Windows 8.1 at home and windows 10 pro in office


Re: NVDA Not Reading Contacts in Outlook Distribution List

Quentin Christensen
 

Hi Abbie,

It is an issue we (and Microsoft) are aware of.  FWIW, it also affects Narrator.

My workarounds:

Several very imperfect workarounds in the interim:

  • Use next / previous object commands to have NVDA read the list. The command will report "selected" for the currently selected contact. As the focus is not correctly following to begin with, using object navigation here always behaves as if "focus moves navigator object" is off.

  • After using the arrow to move through the list, press ALT twice to move to the ribbon and back. The problem is the focus does NOT return to the list, it goes back to the list name, so you need to press TAB to then move back to the list, but then the last item with focus is reported.


I haven't heard an ETA on a fix from Microsoft yet.

Kind regards

Quentin.

On Mon, May 20, 2019 at 6:24 AM Abbie Taylor <abbietaylor945@...> wrote:

When opening a distribution list in the latest version of Outlook that comes with Office 365, NVDA won’t read the list of recipients, not even with object navigation. System Access does read the list when I arrow through it, so if this is a bug on the part of NVDA, I would like to see it addressed in a future update. ,If not, perhaps someone who’s had success reading this list with NVDA can explain how it’s done. Thank you.

 

 

 

Abbie Johnson Taylor, Author https://abbiescorner.wordpress.com

http://www.abbiejohnsontaylor.com

abbietaylor945@...

 

 

 


--
Abbie Johnson Taylor, Author
http://www.abbiejohnsontaylor.com
http://abbiescorner.wordpress.com
abbietaylor945@...



--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: Bug in Office 2010?

Quentin Christensen
 

Hi Adriani,

Is it that the window is appearing but not responsive until you alt+tab away and back?  Or that it takes a little while to appear and it just happens that by the time you alt+tab away and back it has appeared?

This can happen if you have network drives that can take a few seconds to respond.  If you press F12 it should also bring up the same dialog.

If it is the save as dialog, that should be a relatively standard dialog.  If you try opening it from elsewhere such as Notepad, does it respond instantly?

Finally, if you set your NVDA log to "debug", it should show more information and may give some more insight into what is happening.  Press NVDA+control+g to open the NVDA general settings and tab to "log level".

You can access the log with NVDA+F1 and then copy it into an email.

Kind regards

Quentin.

On Sat, May 18, 2019 at 6:24 PM Adriani Botez <adriani.botez@...> wrote:

Dear all,

 

could someone please test if following is reproducible in Office 2010?

 

  1. With NVDA running, open an Excel sheet.
  2. Press alt,followed by f, followed by a

 

What should happen: NVDA should read the save as dialog which appears on the screen.

 

What seems to happen: NVDA does not read the save as dialog and you have to press alt+tab twice. After that, NVDA reports it correctly.

 

 

Thanks and best regards

Adriani

 

 

 



--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: reporting windows size at start up?

Matt Turner
 

ah, didn't no that, as I don't use any windows apps from the store.

I'll install the add-on though.

On 5/19/2019 2:13 PM, Joseph Lee wrote:

Hi,

I know I’m saying this for the umpteenth time… This is resolved via Windows 10 App Essentials. If this isn’t resolved after installing that add-on, let me know so I can investigate and correct it before I release add-on 19.06 this week.

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Matt Turner
Sent: Sunday, May 19, 2019 10:56 AM
To: NVDA <nvda@groups.io>
Subject: Re: [nvda] reporting windows size at start up?

 

Hi, using the latest version of NVDA.

I'm also using a fit headless display with my mac mini.

On 5/19/2019 9:20 AM, Chris wrote:

Are you running a older version of NVDA?

 

I can remember it being announced a while back but not heard it recently announced in more recent releases

 

 

 

 

 

From: Matt Turner
Sent: 19 May 2019 13:57
To: NVDA
Subject: reporting windows size at start up?

 

Hi folks.

 

Using windows 10, on my mac mini, when ever I start up, or log out, I

get something like  windows size is.

 

 

 

 


NVDA Not Reading Contacts in Outlook Distribution List

Abbie Taylor <abbietaylor945@...>
 

When opening a distribution list in the latest version of Outlook that comes with Office 365, NVDA won’t read the list of recipients, not even with object navigation. System Access does read the list when I arrow through it, so if this is a bug on the part of NVDA, I would like to see it addressed in a future update. ,If not, perhaps someone who’s had success reading this list with NVDA can explain how it’s done. Thank you.

 

 

 

Abbie Johnson Taylor, Author https://abbiescorner.wordpress.com

http://www.abbiejohnsontaylor.com

abbietaylor945@...

 

 

 


--
Abbie Johnson Taylor, Author
http://www.abbiejohnsontaylor.com
http://abbiescorner.wordpress.com
abbietaylor945@...


Re: StationPlaylist add-on 19.06 and 18.09.9-LTS to be released on May 19th #addonrelease

 

Hi,

Partly caused by the Delphi toolkit the app is written in. Take a look at the following thread from nvda-spl list:

https://nvda-spl.groups.io/g/nvda-spl/topic/edit_areas_in_creator_options/31622337?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,31622337

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Robert Doc Wright godfearer
Sent: Sunday, May 19, 2019 12:16 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] StationPlaylist add-on 19.06 and 18.09.9-LTS to be released on May 19th #AddonRelease

 

Right now when I tab through in Creator I get a lot of blank fields where Jaws is finding text.

 

                                                                                                                                If all I have left in this world is God, I have everything!                                                                                                                                                                                                                                                                                                                                                Sent from Mail for Windows 10

 

From: Joseph Lee
Sent: Sunday, May 19, 2019 9:08 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] StationPlaylist add-on 19.06 and 18.09.9-LTS to be released on May 19th #AddonRelease

 

Hi,

Hmmm, as in what features are included, or what specific things are address in this version?

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Robert Doc Wright godfearer
Sent: Sunday, May 19, 2019 1:29 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] StationPlaylist add-on 19.06 and 18.09.9-LTS to be released on May 19th #AddonRelease

 

How does this benefit StationPlaylist creator users?

 

                                                                                                                                If all I have left in this world is God, I have everything!                                                                                                                                                                                                                                                                                                                                                Sent from Mail for Windows 10

 

From: Joseph Lee
Sent: Saturday, May 18, 2019 9:30 PM
To: nvda-addons@nvda-addons.groups.io
Subject: [nvda] StationPlaylist add-on 19.06 and 18.09.9-LTS to be released on May 19th #AddonRelease

 

Hi everyone,

 

StationPlaylist add-on 19.06 (stable) and 18.09.9 (long-term) will go out to add-on users tomorrow (May 19th). These releases includes improvements for supporting SPL Encoder and Streamer, along with incorporating more changes from more recent NVDA releases.

 

Note: SPL add-on 19.06 (stable) requires Studio 5.20 and later. Add-on 18.09.9 will continue to support Studio 5.1x.

 

Cheers,

Joseph

 

 


Re: reporting windows size at start up?

Richard Bartholomew
 

Ah, ok, I did wonder but didn’t see an update option in the Manage Add-Ons section; I’ll go and download the latest, then!

 

Cheers

Richard Bartholomew

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Chris via Groups.Io
Sent: 19 May 2019 20:37
To: nvda@nvda.groups.io
Subject: Re: [nvda] reporting windows size at start up?

 

But not the latest win10 app essentials, that version is about three years out of date

The latest version should fix this issue

 

 

From: Richard Bartholomew
Sent: 19 May 2019 20:32
To: nvda@nvda.groups.io
Subject: Re: [nvda] reporting windows size at start up?

 

Hi,

 

I get this message, too, and have Windows 10 App Essentials 16.12.2 installed using Windows 1809 with all updates applied.

 

Cheers

Richard Bartholomew

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: 19 May 2019 19:13
To: nvda@nvda.groups.io
Subject: Re: [nvda] reporting windows size at start up?

 

Hi,

I know I’m saying this for the umpteenth time… This is resolved via Windows 10 App Essentials. If this isn’t resolved after installing that add-on, let me know so I can investigate and correct it before I release add-on 19.06 this week.

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Matt Turner
Sent: Sunday, May 19, 2019 10:56 AM
To: NVDA <nvda@groups.io>
Subject: Re: [nvda] reporting windows size at start up?

 

Hi, using the latest version of NVDA.

I'm also using a fit headless display with my mac mini.

On 5/19/2019 9:20 AM, Chris wrote:

Are you running a older version of NVDA?

 

I can remember it being announced a while back but not heard it recently announced in more recent releases

 

 

 

 

 

From: Matt Turner
Sent: 19 May 2019 13:57
To: NVDA
Subject: reporting windows size at start up?

 

Hi folks.

 

Using windows 10, on my mac mini, when ever I start up, or log out, I

get something like  windows size is.

 

 

 

 

 


Re: reporting windows size at start up?

Chris
 

But not the latest win10 app essentials, that version is about three years out of date

The latest version should fix this issue

 

 

From: Richard Bartholomew
Sent: 19 May 2019 20:32
To: nvda@nvda.groups.io
Subject: Re: [nvda] reporting windows size at start up?

 

Hi,

 

I get this message, too, and have Windows 10 App Essentials 16.12.2 installed using Windows 1809 with all updates applied.

 

Cheers

Richard Bartholomew

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Joseph Lee
Sent: 19 May 2019 19:13
To: nvda@nvda.groups.io
Subject: Re: [nvda] reporting windows size at start up?

 

Hi,

I know I’m saying this for the umpteenth time… This is resolved via Windows 10 App Essentials. If this isn’t resolved after installing that add-on, let me know so I can investigate and correct it before I release add-on 19.06 this week.

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Matt Turner
Sent: Sunday, May 19, 2019 10:56 AM
To: NVDA <nvda@groups.io>
Subject: Re: [nvda] reporting windows size at start up?

 

Hi, using the latest version of NVDA.

I'm also using a fit headless display with my mac mini.

On 5/19/2019 9:20 AM, Chris wrote:

Are you running a older version of NVDA?

 

I can remember it being announced a while back but not heard it recently announced in more recent releases

 

 

 

 

 

From: Matt Turner
Sent: 19 May 2019 13:57
To: NVDA
Subject: reporting windows size at start up?

 

Hi folks.

 

Using windows 10, on my mac mini, when ever I start up, or log out, I

get something like  windows size is.