Date   

locked Re: eliminating a person's e-mail address

hurrikennyandopo ...
 

Hi


Go into the mail app and when you see your messages you will then need to tab a few times until you hear switch to people button then press the enter key or space bar.

  When it opens tab to When the next screen comes up tab about 4 times until you get to list of contacts.


You can then arrow down the list pick a person then use the application key then arrow down to delete and press the enter key it will ask you like are you sure then delete them out.


They will be gone then.


hope that helps.


Gene nz



On 26/05/2019 8:04 AM, Arlene wrote:

Hi list: How does one eliminate a person’s e-mail address?  I don’t work with this person any longer.  I’m using windows 10 mail app.  I knew how to do it using outlook but I don’t know how to do it using windows mail. Any help will be appreciated.

 

Sent from Mail for Windows 10

 

--
Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net
 
Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which location (or locations) are nearest to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa).
To find out which software is installed on the APNK network please visit the following link http://www.aotearoapeoplesnetwork.info/faq/software To find out how to use NVDA on APNK computers please visit the following link http://www.aotearoapeoplesnetwork.info/faq/nvda
 

To find out which software is available on the Christchurch City Library network, and how to start the NVDA screen reader, please go to the following links. Software available  https://my.christchurchcitylibraries.com/faq/computers/#faq_5884  How to start the NVDA screen reader on Christchurch City Library computers  https://my.christchurchcitylibraries.com/faqs/what-screen-reader-software-is-available/
 
To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.


Re: something odd aobut nvda latest and Firefox 67

Gene
 

We'll see what others report.  It sounds like a Firefox problem, but we don't know that.  Have you tested with another screen-reader to see if the same problem exists? 
 
For now, you may want to work around the problem by opening pages not in different tabs but in different windows which you can probably alt tab among.
 
Gene

----- Original message -----
Sent: Sunday, May 26, 2019 12:59 PM
Subject: Re: [nvda] something odd aobut nvda latest and Firefox 67

Control+tab is what I should have said, because that is the truth. I’m running Windows 10 1809. I’m running NVDA alpha-17329,b73e3426. This has started happening in Firefox 67. I don’t remember it occurring before.

 

It is almost as if the command to move from tab to tab isn’t working properly every time it is used. Pardon me for giving bad information about my own issue.

 

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Sunday, May 26, 2019 1:14 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] something odd aobut nvda latest and Firefox 67

 

When you alt tab, what doesn't work?  Alt tab is the command to move from one opened window to another.  It has nothing specific to do with Firefox.  So what happens in firefox that is not as it should be?  Are you talking about having more than one firefox Window opened or something else?

 

Gene

----- Original Message -----

 Subject: [nvda] something odd aobut nvda latest and Firefox 67
 To: nvda@nvda.groups.io
 Date: Saturday, May 25, 2019, 10:19 PM
 
 Is anyone seeing the same
 thing, or something similar? When I alt-tab, it
 doesn’t properly work. I can’t describe more
 accurately than that.
 
 
 


Re: something odd aobut nvda latest and Firefox 67

 

Control+tab is what I should have said, because that is the truth. I’m running Windows 10 1809. I’m running NVDA alpha-17329,b73e3426. This has started happening in Firefox 67. I don’t remember it occurring before.

 

It is almost as if the command to move from tab to tab isn’t working properly every time it is used. Pardon me for giving bad information about my own issue.

 

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Sunday, May 26, 2019 1:14 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] something odd aobut nvda latest and Firefox 67

 

When you alt tab, what doesn't work?  Alt tab is the command to move from one opened window to another.  It has nothing specific to do with Firefox.  So what happens in firefox that is not as it should be?  Are you talking about having more than one firefox Window opened or something else?

 

Gene

----- Original Message -----

 Subject: [nvda] something odd aobut nvda latest and Firefox 67
 To: nvda@nvda.groups.io
 Date: Saturday, May 25, 2019, 10:19 PM
 
 Is anyone seeing the same
 thing, or something similar? When I alt-tab, it
 doesn’t properly work. I can’t describe more
 accurately than that.
 
 
 


locked Re: eliminating a person's e-mail address

Arlene
 

Yes, I do not work with her in my work program anymore.  She switched jobs.  That’s why I don’t want to keep her adder

 

Sent from Mail for Windows 10

 

From: Sarah k Alawami
Sent: May 25, 2019 5:34 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] eliminating a person's e-mail address

 

So in other words, you want to add her to a blacklist, not ablock list, but a blacklist, you might want to try right clicking on her address and see what's there, good luck.

On May 25, 2019 18:25:21 "Arlene" <nedster66@...> wrote:

I just want rid of her address because I am not working with this person.  Not wanting to block her. 

 

Sent from Mail for Windows 10

 

From: Brian Vogel
Sent: May 25, 2019 2:15 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] eliminating a person's e-mail address

 

Arlene,

          Are you asking how to purge an e-mail address from your Contacts?   If so, that's the People app that works hand-in-hand with the Mail App.   If you mean blocking mail from a given address I have no idea whether the Mail App supports that or not.

--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

Puritanism:  The haunting fear that someone, somewhere, may be happy.

        ~ H.L. Mencken

 

 

 

 


Re: something odd aobut nvda latest and Firefox 67

Gene
 

When you alt tab, what doesn't work?  Alt tab is the command to move from one opened window to another.  It has nothing specific to do with Firefox.  So what happens in firefox that is not as it should be?  Are you talking about having more than one firefox Window opened or something else?
 
Gene

----- Original Message -----
 Subject: [nvda] something odd aobut nvda latest and Firefox 67
 To: nvda@nvda.groups.io
 Date: Saturday, May 25, 2019, 10:19 PM
 
 Is anyone seeing the same
 thing, or something similar? When I alt-tab, it
 doesn’t properly work. I can’t describe more
 accurately than that.
 
 
 



Re: something odd aobut nvda latest and Firefox 67

Laurie Mehta
 

Hi, I have the latest NVDA and the latest Firefox on this laptop that is running Win7 and all is well... no problems.
I hope this helps some.
-LM

--------------------------------------------

On Sat, 5/25/19, Governor staten <govsta@gmail.com> wrote:

Subject: [nvda] something odd aobut nvda latest and Firefox 67
To: nvda@nvda.groups.io
Date: Saturday, May 25, 2019, 10:19 PM

Is anyone seeing the same
thing, or something similar? When I alt-tab, it
doesn’t properly work. I can’t describe more
accurately than that.


something odd aobut nvda latest and Firefox 67

 

Is anyone seeing the same thing, or something similar? When I alt-tab, it doesn’t properly work. I can’t describe more accurately than that.


locked Re: eliminating a person's e-mail address

Sarah k Alawami
 

So in other words, you want to add her to a blacklist, not ablock list, but a blacklist, you might want to try right clicking on her address and see what's there, good luck.

On May 25, 2019 18:25:21 "Arlene" <nedster66@...> wrote:

I just want rid of her address because I am not working with this person.  Not wanting to block her. 

 

Sent from Mail for Windows 10

 

From: Brian Vogel
Sent: May 25, 2019 2:15 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] eliminating a person's e-mail address

 

Arlene,

          Are you asking how to purge an e-mail address from your Contacts?   If so, that's the People app that works hand-in-hand with the Mail App.   If you mean blocking mail from a given address I have no idea whether the Mail App supports that or not.

--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

Puritanism:  The haunting fear that someone, somewhere, may be happy.

        ~ H.L. Mencken

 

 

 


locked Re: eliminating a person's e-mail address

Arlene
 

I just want rid of her address because I am not working with this person.  Not wanting to block her. 

 

Sent from Mail for Windows 10

 

From: Brian Vogel
Sent: May 25, 2019 2:15 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] eliminating a person's e-mail address

 

Arlene,

          Are you asking how to purge an e-mail address from your Contacts?   If so, that's the People app that works hand-in-hand with the Mail App.   If you mean blocking mail from a given address I have no idea whether the Mail App supports that or not.

--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

Puritanism:  The haunting fear that someone, somewhere, may be happy.

        ~ H.L. Mencken

 

 

 


Re: Weather_Plus 6.4 update available

Adriano Barbieri
 

Hi,
If you give me the cities zip codes that disappear and describe me step by step what you do to insert them in the list and save them, I could try to reproduce the  problem.
Also paste the log, you never know who can find us.

Thanks


Regards
Adriano


Il 25/05/2019 21:17, Sarah k Alawami ha scritto:

Do you have a log just in case that would help in this case, as a few are apparently experiencing the error?

On May 25, 2019 05:09:16 "Adriano Barbieri via Groups.Io" <adrianobarb@...> wrote:

Hi,


Impossible!
No city is ever canceled by a Weather_Plus update, there is no automatic instruction in the code that can do this without the user's consent.

A city can only be eliminated by a voluntary action by the user in the following cases:

1 When a city does not work properly, after 2 consecutive malfunctions the user is alerted by a dialog box asking if he wants to delete it from the list, if by mistake it is confirmed, only in this moment the city is eliminated.
2 From the settings window, by pressing the "Remove" button.
So, third case, Weather_Plus has become sentient and some cities are not nice to him and autonomously decided to eliminate them on his own. lol According to you which is 3?

If the entire list of cities had been canceled, it would have been more acceptable,Jokes aside, cities are saved in% appdata% nvda weather.zipcodes, and therefore are not located in the% appdata% vda addons weather_plus directory, and therefore cannot be altered or deleted by a component update additional.
be quiet and safe. :)


Regards
Adriano


Il 25/05/2019 02:39, David Moore ha scritto:

Hi!

In Weather 6.3, I had all of my cities. Now, I upgraded to 6.4, and I lost Columbus, Ohio, and many of my cities again!

I was wondering what this could be.

What happened between 6.3 that worked great, and 6.4?

Have a great one, guys!

David Moore

 

Sent from Mail for Windows 10

 

From: Adriano Barbieri via Groups.Io
Sent: Friday, May 24, 2019 11:50 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus 6.4 update available

 

Thanks Richard,

 

But for some obscure reason, some users continue to report errors from 6.2 to 6.4.
I'm pretty sure that these users, who use stable nvda versions (which have the error sound disabled) have 2 versions of Weather_Plus installed, one still in penginginstall, because for some reason the installation of an update has failed.

 

Regards
Adriano

 

Il 24/05/2019 17:25, Richard Wells ha scritto:

Thank you so much for the quick fix. The update went flawlessly and I really appreciate your hard work on this project.

On 5/24/2019 9:45 AM, Adriano Barbieri via Groups.Io wrote:

Hi to every one,

 

Changes in this version:

•  Daylight saving time removed in the "Details" function;
The service used by this function has changed, so it has been removed.
• Improved audio effects reproduction;
Now they update regularly if the weather conditions change.

Weather_Plus can update itself, however you can download it from the following pages:
Caution:
If you do not use the automatic update, you must first uninstall every old version of Weather_Plus!
http://www.nvda.it/files/plugin/weather_plus6.4.nvda-addon

Or:

https://addons.nvda-project.org/addons/Weather_Plus.en.html

 

I thank Abdel, Rémy, Noelia, Zvonimire all the collaborators for the maintenance of the Weather_Plus translation.

 

Regards

Adriano

 

 


locked Re: eliminating a person's e-mail address

 

Arlene,

          Are you asking how to purge an e-mail address from your Contacts?   If so, that's the People app that works hand-in-hand with the Mail App.   If you mean blocking mail from a given address I have no idea whether the Mail App supports that or not.

--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

Puritanism:  The haunting fear that someone, somewhere, may be happy.

        ~ H.L. Mencken

 

 


locked eliminating a person's e-mail address

Arlene
 

Hi list: How does one eliminate a person’s e-mail address?  I don’t work with this person any longer.  I’m using windows 10 mail app.  I knew how to do it using outlook but I don’t know how to do it using windows mail. Any help will be appreciated.

 

Sent from Mail for Windows 10

 


Re: Weather_Plus 6.4 update available

Sarah k Alawami
 

Do you have a log just in case that would help in this case, as a few are apparently experiencing the error?

On May 25, 2019 05:09:16 "Adriano Barbieri via Groups.Io" <adrianobarb@...> wrote:

Hi,


Impossible!
No city is ever canceled by a Weather_Plus update, there is no automatic instruction in the code that can do this without the user's consent.

A city can only be eliminated by a voluntary action by the user in the following cases:

1 When a city does not work properly, after 2 consecutive malfunctions the user is alerted by a dialog box asking if he wants to delete it from the list, if by mistake it is confirmed, only in this moment the city is eliminated.
2 From the settings window, by pressing the "Remove" button.
So, third case, Weather_Plus has become sentient and some cities are not nice to him and autonomously decided to eliminate them on his own. lol According to you which is 3?

If the entire list of cities had been canceled, it would have been more acceptable,Jokes aside, cities are saved in% appdata% nvda weather.zipcodes, and therefore are not located in the% appdata% vda addons weather_plus directory, and therefore cannot be altered or deleted by a component update additional.
be quiet and safe. :)


Regards
Adriano


Il 25/05/2019 02:39, David Moore ha scritto:

Hi!

In Weather 6.3, I had all of my cities. Now, I upgraded to 6.4, and I lost Columbus, Ohio, and many of my cities again!

I was wondering what this could be.

What happened between 6.3 that worked great, and 6.4?

Have a great one, guys!

David Moore

 

Sent from Mail for Windows 10

 

From: Adriano Barbieri via Groups.Io
Sent: Friday, May 24, 2019 11:50 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus 6.4 update available

 

Thanks Richard,

 

But for some obscure reason, some users continue to report errors from 6.2 to 6.4.
I'm pretty sure that these users, who use stable nvda versions (which have the error sound disabled) have 2 versions of Weather_Plus installed, one still in penginginstall, because for some reason the installation of an update has failed.

 

Regards
Adriano

 

Il 24/05/2019 17:25, Richard Wells ha scritto:

Thank you so much for the quick fix. The update went flawlessly and I really appreciate your hard work on this project.

On 5/24/2019 9:45 AM, Adriano Barbieri via Groups.Io wrote:

Hi to every one,

 

Changes in this version:

•  Daylight saving time removed in the "Details" function;
The service used by this function has changed, so it has been removed.
• Improved audio effects reproduction;
Now they update regularly if the weather conditions change.

Weather_Plus can update itself, however you can download it from the following pages:
Caution:
If you do not use the automatic update, you must first uninstall every old version of Weather_Plus!
http://www.nvda.it/files/plugin/weather_plus6.4.nvda-addon

Or:

https://addons.nvda-project.org/addons/Weather_Plus.en.html

 

I thank Abdel, Rémy, Noelia, Zvonimire all the collaborators for the maintenance of the Weather_Plus translation.

 

Regards

Adriano

 

 


Re: Synthesizer languages with NVDA?

Ibrahim Abedrabbo
 

Zahra,
The espeak tries to read Arabic if you select Arabic from the NVDA's voice settings, However, It is extremely hard to understand the accent. I am a native speaker of Arabic and I can understand some words, but not entire sentences. So far the espeak is not a reliable option for those who want to have access to Arabic using NVDA. The best and most reliable option is to buy Acapela or vocalizer. I personally prefer the vocalizer. It is inexpensive, and very light, and the automatic language switching is almost perfect.

Regards,

Ibrahim

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of zahra
Sent: Saturday, May 25, 2019 1:43 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Synthesizer languages with NVDA?

what happen if we set arabic in nvda's voice settings?

On 5/25/19, Ibrahim Abedrabbo <abedrabboibrahim@gmail.com> wrote:
No, espeak cannot read Arabic. It can say the arabic letters with the
english voice.
On May 25, 2019, at 1:16 AM, zahra <nasrinkhaksar3@gmail.com> wrote:

hi.
if i am correct, nvda in its recent versions, can read arabic
documents by default using espeak.
for hebrew, i believe that its supported since many years ago in espeak.

On 5/25/19, Heather Thomas <heather.thomas@carroll.org> wrote:
Hello,

I was wondering…can you tell me what NVDA synthesizers support
non-Latin languages like Hebrew or Arabic? Do you have to download
these synthesizers, do you have to download additional voices, and
are they free?

Thank you,

Heather

Carroll Center for the Blind Confidentiality Notice: This email and
any files transmitted with it are confidential and are intended
solely for the use of the individual(s) addressed in the message
above. This communication may contain sensitive or confidential
information. If you are not an intended recipient dissemination,
forwarding, printing or copying of this email is strictly
prohibited. If you received this email in error and the email
contains private information, please contact the Carroll Center
Compliance Line at 617-969-6200 x. 214. If the email was sent to
you in error but does not contain private information, please
contact the sender and delete the email.




--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali





--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali


Re: Synthesizer languages with NVDA?

 

what happen if we set arabic in nvda's voice settings?

On 5/25/19, Ibrahim Abedrabbo <abedrabboibrahim@gmail.com> wrote:
No, espeak cannot read Arabic. It can say the arabic letters with the
english voice.
On May 25, 2019, at 1:16 AM, zahra <nasrinkhaksar3@gmail.com> wrote:

hi.
if i am correct, nvda in its recent versions, can read arabic
documents by default using espeak.
for hebrew, i believe that its supported since many years ago in espeak.

On 5/25/19, Heather Thomas <heather.thomas@carroll.org> wrote:
Hello,

I was wondering…can you tell me what NVDA synthesizers support non-Latin
languages like Hebrew or Arabic? Do you have to download these
synthesizers,
do you have to download additional voices, and are they free?

Thank you,

Heather

Carroll Center for the Blind Confidentiality Notice: This email and any
files transmitted with it are confidential and are intended solely for
the
use of the individual(s) addressed in the message above. This
communication
may contain sensitive or confidential information. If you are not an
intended recipient dissemination, forwarding, printing or copying of
this
email is strictly prohibited. If you received this email in error and
the
email contains private information, please contact the Carroll Center
Compliance Line at 617-969-6200 x. 214. If the email was sent to you in
error but does not contain private information, please contact the
sender
and delete the email.




--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali




--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali


Re: Synthesizer languages with NVDA?

Ibrahim Abedrabbo
 

No,  espeak cannot read Arabic. It can say the arabic letters with the english voice.


On May 25, 2019, at 1:16 AM, zahra <nasrinkhaksar3@...> wrote:

hi.
if i am correct, nvda in its recent versions, can read arabic
documents by default using espeak.
for hebrew, i believe that its supported since many years ago in espeak.

On 5/25/19, Heather Thomas <heather.thomas@...> wrote:
Hello,

I was wondering…can you tell me what NVDA synthesizers support non-Latin
languages like Hebrew or Arabic? Do you have to download these synthesizers,
do you have to download additional voices, and are they free?

Thank you,

Heather

Carroll Center for the Blind Confidentiality Notice:  This email and any
files transmitted with it are confidential and are intended solely for the
use of the individual(s) addressed in the message above.  This communication
may contain sensitive or confidential information.  If you are not an
intended recipient dissemination, forwarding, printing or copying of this
email is strictly prohibited.  If you received this email in error and the
email contains private information, please contact the Carroll Center
Compliance Line at 617-969-6200 x. 214.  If the email was sent to you in
error but does not contain private information, please contact the sender
and delete the email.






--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali




Re: Weather_Plus 6.4 update available

Adriano Barbieri
 

Hi,


Impossible!
No city is ever canceled by a Weather_Plus update, there is no automatic instruction in the code that can do this without the user's consent.

A city can only be eliminated by a voluntary action by the user in the following cases:

1 When a city does not work properly, after 2 consecutive malfunctions the user is alerted by a dialog box asking if he wants to delete it from the list, if by mistake it is confirmed, only in this moment the city is eliminated.
2 From the settings window, by pressing the "Remove" button.
So, third case, Weather_Plus has become sentient and some cities are not nice to him and autonomously decided to eliminate them on his own. lol According to you which is 3?

If the entire list of cities had been canceled, it would have been more acceptable,Jokes aside, cities are saved in% appdata% nvda weather.zipcodes, and therefore are not located in the% appdata% vda addons weather_plus directory, and therefore cannot be altered or deleted by a component update additional.
be quiet and safe. :)


Regards
Adriano


Il 25/05/2019 02:39, David Moore ha scritto:

Hi!

In Weather 6.3, I had all of my cities. Now, I upgraded to 6.4, and I lost Columbus, Ohio, and many of my cities again!

I was wondering what this could be.

What happened between 6.3 that worked great, and 6.4?

Have a great one, guys!

David Moore

 

Sent from Mail for Windows 10

 

From: Adriano Barbieri via Groups.Io
Sent: Friday, May 24, 2019 11:50 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus 6.4 update available

 

Thanks Richard,

 

But for some obscure reason, some users continue to report errors from 6.2 to 6.4.
I'm pretty sure that these users, who use stable nvda versions (which have the error sound disabled) have 2 versions of Weather_Plus installed, one still in penginginstall, because for some reason the installation of an update has failed.

 

Regards
Adriano

 

Il 24/05/2019 17:25, Richard Wells ha scritto:

Thank you so much for the quick fix. The update went flawlessly and I really appreciate your hard work on this project.

On 5/24/2019 9:45 AM, Adriano Barbieri via Groups.Io wrote:

Hi to every one,

 

Changes in this version:

•  Daylight saving time removed in the "Details" function;
The service used by this function has changed, so it has been removed.
• Improved audio effects reproduction;
Now they update regularly if the weather conditions change.

Weather_Plus can update itself, however you can download it from the following pages:
Caution:
If you do not use the automatic update, you must first uninstall every old version of Weather_Plus!
http://www.nvda.it/files/plugin/weather_plus6.4.nvda-addon

Or:

https://addons.nvda-project.org/addons/Weather_Plus.en.html

 

I thank Abdel, Rémy, Noelia, Zvonimire all the collaborators for the maintenance of the Weather_Plus translation.

 

Regards

Adriano

 

 


Re: Synthesizer languages with NVDA?

 

hi.
if i am correct, nvda in its recent versions, can read arabic
documents by default using espeak.
for hebrew, i believe that its supported since many years ago in espeak.

On 5/25/19, Heather Thomas <heather.thomas@carroll.org> wrote:
Hello,

I was wondering…can you tell me what NVDA synthesizers support non-Latin
languages like Hebrew or Arabic? Do you have to download these synthesizers,
do you have to download additional voices, and are they free?

Thank you,

Heather

Carroll Center for the Blind Confidentiality Notice: This email and any
files transmitted with it are confidential and are intended solely for the
use of the individual(s) addressed in the message above. This communication
may contain sensitive or confidential information. If you are not an
intended recipient dissemination, forwarding, printing or copying of this
email is strictly prohibited. If you received this email in error and the
email contains private information, please contact the Carroll Center
Compliance Line at 617-969-6200 x. 214. If the email was sent to you in
error but does not contain private information, please contact the sender
and delete the email.



--
By God,
were I given all the seven heavens
with all they contain
in order that
I may disobey God
by depriving an ant
from the husk of a grain of barley,
I would not do it.
imam ali


Re: Weather_Plus 6.4 update available

David Moore
 

Hi!

In Weather 6.3, I had all of my cities. Now, I upgraded to 6.4, and I lost Columbus, Ohio, and many of my cities again!

I was wondering what this could be.

What happened between 6.3 that worked great, and 6.4?

Have a great one, guys!

David Moore

 

Sent from Mail for Windows 10

 

From: Adriano Barbieri via Groups.Io
Sent: Friday, May 24, 2019 11:50 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Weather_Plus 6.4 update available

 

Thanks Richard,

 

But for some obscure reason, some users continue to report errors from 6.2 to 6.4.
I'm pretty sure that these users, who use stable nvda versions (which have the error sound disabled) have 2 versions of Weather_Plus installed, one still in penginginstall, because for some reason the installation of an update has failed.

 

Regards
Adriano

 

Il 24/05/2019 17:25, Richard Wells ha scritto:

Thank you so much for the quick fix. The update went flawlessly and I really appreciate your hard work on this project.

On 5/24/2019 9:45 AM, Adriano Barbieri via Groups.Io wrote:

Hi to every one,

 

Changes in this version:

•  Daylight saving time removed in the "Details" function;
The service used by this function has changed, so it has been removed.
• Improved audio effects reproduction;
Now they update regularly if the weather conditions change.

Weather_Plus can update itself, however you can download it from the following pages:
Caution:
If you do not use the automatic update, you must first uninstall every old version of Weather_Plus!
http://www.nvda.it/files/plugin/weather_plus6.4.nvda-addon

Or:

https://addons.nvda-project.org/addons/Weather_Plus.en.html

 

I thank Abdel, Rémy, Noelia, Zvonimire all the collaborators for the maintenance of the Weather_Plus translation.

 

Regards

Adriano

 

 


locked Re: Issues With Google Drive

 

Ibrahim,

           As your own message notes, this has nothing whatsoever to do with NVDA and is, as a result, entirely off-topic for the group.  We have a Chat Subgroup that you can join if you wish to discuss this sort of thing with others from the NVDA group, but which is not about NVDA:


I suggest you subscribe to the Chat Subgroup and repost this query there.

This topic is now locked as it is entirely off-topic for the main NVDA group.

--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

Puritanism:  The haunting fear that someone, somewhere, may be happy.

        ~ H.L. Mencken