Date   

Re: Nvda, Total Commander and its' panels

Ralf Kefferpuetz
 

Hi Ollie,

I'm the author of this addon and use ftp as well. I never missed anything, lol.
Can you give me a step by step description about what text boxes you are speaking and where I can find them? I can then
try to make them read.

Cheers,
Ralf

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Mallard
Sent: Sonntag, 19. Mai 2019 15:19
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda, Total Commander and its' panels

Thanks Jarek.


I've installed it, but it doesn't tackle the unreadable edit boxes in FTP. It doesn't really matter, because I'm so used
to them, but it might be difficult for others.


I've been in contact with Christian Ghisler, the dev of Total Commander for many years now, and he had explained why
those text boxes cannot be read by screen readers, but I don't remember the technical explanation he gave me.


Ciao,

Ollie




Il 18/05/2019 22:35, Jarek.Krcmar ha scritto:
Hi,

I have donloaded from here:

https://github.com/Novalis7747/totalcmd-enhanced/raw/master/totalcmd-0
.6.2.nvda-addon


Jarek

Dne 18-05-2019 v 22:15 Mallard napsal(a):
Hello Jarek,


I didn't know there was an add-on for Total Commander and NVDA.

It would be interesting to see if it makes some parts of the ftp
connection settings.

Where did you find the add-on, please?


Thaks, ciao,

Ollie




Il 18/05/2019 22:06, Jarek.Krcmar ha scritto:
greetintgs,


I have downloaded and installed the TotalCmd Nvda addon, and after
restarting Nvda mi started Total Commander 32 bit.

I found out, That the panels are anounced.

Thank you very much and excuse my English.

I have written to this conference, but I am not certain in English.
I am learning it.

Regards:

Jarek

Dne 18-05-2019 v 21:13 Ralf Kefferpuetz napsal(a):
Hello,

I have written an addon for Total Commander 32bit and 64bit.
You can download it here:
https://github.com/Novalis7747/totalcmd-enhanced/raw/master/totalcm
d-0.6.2.nvda-addon

It has some features and it speaks left/right also for the 64bit
version.

Cheers,
   Ralf

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of
Jarek.Krcmar
Sent: Samstag, 18. Mai 2019 18:19
To: nvda@nvda.groups.io
Subject: [nvda] Nvda, Total Commander and its' panels

Greetings to all
I have both Free Commander and Total Commander installed on my
computer.
I thought Nvda would announce the panels at Total Commander, but it
wasn't.
When I press Nvda + T, only the Total Commander window is reported.
The Tab key does not report panels.
So I want to ask if any of you are using Total Commander, and
whether it will ever be implemented into Nvda by announcing panels
in Total Commander.
Regards:
Jarek













Re: StationPlaylist add-on 19.06 and 18.09.9-LTS to be released on May 19th #addonrelease

 

Hi,

Hmmm, as in what features are included, or what specific things are address in this version?

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Robert Doc Wright godfearer
Sent: Sunday, May 19, 2019 1:29 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] StationPlaylist add-on 19.06 and 18.09.9-LTS to be released on May 19th #AddonRelease

 

How does this benefit StationPlaylist creator users?

 

                                                                                                                                If all I have left in this world is God, I have everything!                                                                                                                                                                                                                                                                                                                                                Sent from Mail for Windows 10

 

From: Joseph Lee
Sent: Saturday, May 18, 2019 9:30 PM
To: nvda-addons@nvda-addons.groups.io
Subject: [nvda] StationPlaylist add-on 19.06 and 18.09.9-LTS to be released on May 19th #AddonRelease

 

Hi everyone,

 

StationPlaylist add-on 19.06 (stable) and 18.09.9 (long-term) will go out to add-on users tomorrow (May 19th). These releases includes improvements for supporting SPL Encoder and Streamer, along with incorporating more changes from more recent NVDA releases.

 

Note: SPL add-on 19.06 (stable) requires Studio 5.20 and later. Add-on 18.09.9 will continue to support Studio 5.1x.

 

Cheers,

Joseph

 


Re: Nvda, Total Commander and its' panels

Mallard
 

Thanks Jarek.


I've installed it, but it doesn't tackle the unreadable edit boxes in FTP. It doesn't really matter, because I'm so used to them, but it might be difficult for others.


I've been in contact with Christian Ghisler, the dev of Total Commander for many years now, and he had explained why those text boxes cannot be read by screen readers, but I don't remember the technical explanation he gave me.


Ciao,

Ollie

Il 18/05/2019 22:35, Jarek.Krcmar ha scritto:
Hi,

I have donloaded from here:

https://github.com/Novalis7747/totalcmd-enhanced/raw/master/totalcmd-0.6.2.nvda-addon

Jarek

Dne 18-05-2019 v 22:15 Mallard napsal(a):
Hello Jarek,


I didn't know there was an add-on for Total Commander and NVDA.

It would be interesting to see if it makes some parts of the ftp connection settings.

Where did you find the add-on, please?


Thaks, ciao,

Ollie




Il 18/05/2019 22:06, Jarek.Krcmar ha scritto:
greetintgs,


I have downloaded and installed the TotalCmd Nvda addon, and after restarting Nvda mi started Total Commander 32 bit.

I found out, That the panels are anounced.

Thank you very much and excuse my English.

I have written to this conference, but I am not certain in English. I am learning it.

Regards:

Jarek

Dne 18-05-2019 v 21:13 Ralf Kefferpuetz napsal(a):
Hello,

I have written an addon for Total Commander 32bit and 64bit.
You can download it here:
https://github.com/Novalis7747/totalcmd-enhanced/raw/master/totalcmd-0.6.2.nvda-addon
It has some features and it speaks left/right also for the 64bit version.

Cheers,
   Ralf

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Jarek.Krcmar
Sent: Samstag, 18. Mai 2019 18:19
To: nvda@nvda.groups.io
Subject: [nvda] Nvda, Total Commander and its' panels

Greetings to all
I have both Free Commander and Total Commander installed on my computer.
I thought Nvda would announce the panels at Total Commander, but it wasn't.
When I press Nvda + T, only the Total Commander window is reported. The Tab key does not report panels.
So I want to ask if any of you are using Total Commander, and whether it will ever be implemented into Nvda by
announcing panels in Total Commander.
Regards:
Jarek












reporting windows size at start up?

Matt Turner
 

Hi folks.

Using windows 10, on my mac mini, when ever I start up, or log out, I get something like  windows size is.


Re: StationPlaylist add-on 19.06 and 18.09.9-LTS to be released on May 19th #addonrelease

Robert Doc Wright godfearer
 

How does this benefit StationPlaylist creator users?

 

                                                                                                                                If all I have left in this world is God, I have everything!                                                                                                                                                                                                                                                                                                                                                Sent from Mail for Windows 10

 

From: Joseph Lee
Sent: Saturday, May 18, 2019 9:30 PM
To: nvda-addons@nvda-addons.groups.io
Subject: [nvda] StationPlaylist add-on 19.06 and 18.09.9-LTS to be released on May 19th #AddonRelease

 

Hi everyone,

 

StationPlaylist add-on 19.06 (stable) and 18.09.9 (long-term) will go out to add-on users tomorrow (May 19th). These releases includes improvements for supporting SPL Encoder and Streamer, along with incorporating more changes from more recent NVDA releases.

 

Note: SPL add-on 19.06 (stable) requires Studio 5.20 and later. Add-on 18.09.9 will continue to support Studio 5.1x.

 

Cheers,

Joseph

 


Re: Nvda, Total Commander and its' panels

Jarek.Krcmar
 

Hi,

I am glad, when Nvda anounces the panels in Total Commander at least 32 bit.

I don't use the ftp server.

In a fact Total Commander suits for me better than Free Commander.

Jarek

Dne 18-05-2019 v 22:18 Mallard napsal(a):

Ah... Great. I've always used a 32-bit version, even on a 64-bit machine, because it works better with my ftp. That's why I'd always had the panels announced.


Great job the add-on, thanks.

Ciao,

Ollie




Il 18/05/2019 21:13, Ralf Kefferpuetz ha scritto:

The 32bit version does annonce it the 64bit version not.

That’s what my addon is for….

*From:*nvda@nvda.groups.io <nvda@nvda.groups.io> *On Behalf Of *Gene
*Sent:* Samstag, 18. Mai 2019 19:17
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] Nvda, Total Commander and its' panels

This has evidently already been tried as the message says that the tab key doesn't report panels.  So if it works in your case, perhaps some difference in settings may be found by comparison. I don't use the program so I can't discuss anything except the possibility that maximizing the program may solve the problem if it isn't maximized.  If it is maximized, try normalizing it. Aside from that, perhaps a comparison of settings in the program might help.

Also, it might be useful to test the program with a JAWS demo on the machine where panels aren't being announced.

I just thought of one other possibility but I have no idea if it could make a difference.  You might try changing the screen resolution.  Comparing the current resolutions between the two computers might be a good idea before experimenting.

Gene

----- Original Message -----

*From:*Mallard <mailto:mallard@kimabe.eu>

*Sent:*Saturday, May 18, 2019 11:59 AM

*To:*nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>

*Subject:*Re: [nvda] Nvda, Total Commander and its' panels

Hello,


Total Commander does indeed announce the panels, but you don't hhhave to
press anything otherthan tab, to move between one panel and the other.


I've used it for about 20 years or more now, with Jaws first and, since
2009, with NVDA.


The good thing, compared to Free Commander, is that it announces panels,
amongst otherthings.


Try simply tabbing, and let me know whether it works for you.

Ciao,

Ollie




Il 18/05/2019 18:19, Jarek.Krcmar ha scritto:
Greetings to all
I have both Free Commander and Total Commander installed on my
computer.
I thought Nvda would announce the panels at Total Commander, but it
wasn't.
When I press Nvda + T, only the Total Commander window is reported.
The Tab key does not report panels.
So I want to ask if any of you are using Total Commander, and whether
it will ever be implemented into Nvda by announcing panels in Total
Commander.
Regards:
Jarek





StationPlaylist add-on 19.06 and 18.09.9-LTS to be released on May 19th #addonrelease

 

Hi everyone,

 

StationPlaylist add-on 19.06 (stable) and 18.09.9 (long-term) will go out to add-on users tomorrow (May 19th). These releases includes improvements for supporting SPL Encoder and Streamer, along with incorporating more changes from more recent NVDA releases.

 

Note: SPL add-on 19.06 (stable) requires Studio 5.20 and later. Add-on 18.09.9 will continue to support Studio 5.1x.

 

Cheers,

Joseph


Re: Nvda, Total Commander and its' panels

Jarek.Krcmar
 

Hi,

I have donloaded from here:

https://github.com/Novalis7747/totalcmd-enhanced/raw/master/totalcmd-0.6.2.nvda-addon

Jarek

Dne 18-05-2019 v 22:15 Mallard napsal(a):

Hello Jarek,


I didn't know there was an add-on for Total Commander and NVDA.

It would be interesting to see if it makes some parts of the ftp connection settings.

Where did you find the add-on, please?


Thaks, ciao,

Ollie




Il 18/05/2019 22:06, Jarek.Krcmar ha scritto:
greetintgs,


I have downloaded and installed the TotalCmd Nvda addon, and after restarting Nvda mi started Total Commander 32 bit.

I found out, That the panels are anounced.

Thank you very much and excuse my English.

I have written to this conference, but I am not certain in English. I am learning it.

Regards:

Jarek

Dne 18-05-2019 v 21:13 Ralf Kefferpuetz napsal(a):
Hello,

I have written an addon for Total Commander 32bit and 64bit.
You can download it here:
https://github.com/Novalis7747/totalcmd-enhanced/raw/master/totalcmd-0.6.2.nvda-addon
It has some features and it speaks left/right also for the 64bit version.

Cheers,
   Ralf

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Jarek.Krcmar
Sent: Samstag, 18. Mai 2019 18:19
To: nvda@nvda.groups.io
Subject: [nvda] Nvda, Total Commander and its' panels

Greetings to all
I have both Free Commander and Total Commander installed on my computer.
I thought Nvda would announce the panels at Total Commander, but it wasn't.
When I press Nvda + T, only the Total Commander window is reported. The Tab key does not report panels.
So I want to ask if any of you are using Total Commander, and whether it will ever be implemented into Nvda by
announcing panels in Total Commander.
Regards:
Jarek










Re: Nvda, Total Commander and its' panels

Mallard
 

Ah... Great. I've always used a 32-bit version, even on a 64-bit machine, because it works better with my ftp. That's why I'd always had the panels announced.


Great job the add-on, thanks.

Ciao,

Ollie

Il 18/05/2019 21:13, Ralf Kefferpuetz ha scritto:

The 32bit version does annonce it the 64bit version not.

That’s what my addon is for….

*From:*nvda@nvda.groups.io <nvda@nvda.groups.io> *On Behalf Of *Gene
*Sent:* Samstag, 18. Mai 2019 19:17
*To:* nvda@nvda.groups.io
*Subject:* Re: [nvda] Nvda, Total Commander and its' panels

This has evidently already been tried as the message says that the tab key doesn't report panels.  So if it works in your case, perhaps some difference in settings may be found by comparison.  I don't use the program so I can't discuss anything except the possibility that maximizing the program may solve the problem if it isn't maximized.  If it is maximized, try normalizing it.  Aside from that, perhaps a comparison of settings in the program might help.

Also, it might be useful to test the program with a JAWS demo on the machine where panels aren't being announced.

I just thought of one other possibility but I have no idea if it could make a difference.  You might try changing the screen resolution.  Comparing the current resolutions between the two computers might be a good idea before experimenting.

Gene

----- Original Message -----

*From:*Mallard <mailto:mallard@kimabe.eu>

*Sent:*Saturday, May 18, 2019 11:59 AM

*To:*nvda@nvda.groups.io <mailto:nvda@nvda.groups.io>

*Subject:*Re: [nvda] Nvda, Total Commander and its' panels

Hello,


Total Commander does indeed announce the panels, but you don't hhhave to
press anything otherthan tab, to move between one panel and the other.


I've used it for about 20 years or more now, with Jaws first and, since
2009, with NVDA.


The good thing, compared to Free Commander, is that it announces panels,
amongst otherthings.


Try simply tabbing, and let me know whether it works for you.

Ciao,

Ollie




Il 18/05/2019 18:19, Jarek.Krcmar ha scritto:
Greetings to all
I have both Free Commander and Total Commander installed on my computer.
I thought Nvda would announce the panels at Total Commander, but it
wasn't.
When I press Nvda + T, only the Total Commander window is reported.
The Tab key does not report panels.
So I want to ask if any of you are using Total Commander, and whether
it will ever be implemented into Nvda by announcing panels in Total
Commander.
Regards:
Jarek





Re: Nvda, Total Commander and its' panels

Mallard
 

Thanks, sorry... I was viewing messages from the bottom up, and I hadn't seen this one.


Ciao,

Ollie

Il 18/05/2019 21:13, Ralf Kefferpuetz ha scritto:
Hello,

I have written an addon for Total Commander 32bit and 64bit.
You can download it here:
https://github.com/Novalis7747/totalcmd-enhanced/raw/master/totalcmd-0.6.2.nvda-addon
It has some features and it speaks left/right also for the 64bit version.

Cheers,
Ralf

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Jarek.Krcmar
Sent: Samstag, 18. Mai 2019 18:19
To: nvda@nvda.groups.io
Subject: [nvda] Nvda, Total Commander and its' panels

Greetings to all
I have both Free Commander and Total Commander installed on my computer.
I thought Nvda would announce the panels at Total Commander, but it wasn't.
When I press Nvda + T, only the Total Commander window is reported. The Tab key does not report panels.
So I want to ask if any of you are using Total Commander, and whether it will ever be implemented into Nvda by
announcing panels in Total Commander.
Regards:
Jarek








Re: Nvda, Total Commander and its' panels

Mallard
 

Hello Jarek,


I didn't know there was an add-on for Total Commander and NVDA.

It would be interesting to see if it makes some parts of the ftp connection settings.

Where did you find the add-on, please?


Thaks, ciao,

Ollie

Il 18/05/2019 22:06, Jarek.Krcmar ha scritto:
greetintgs,


I have downloaded and installed the TotalCmd Nvda addon, and after restarting Nvda mi started Total Commander 32 bit.

I found out, That the panels are anounced.

Thank you very much and excuse my English.

I have written to this conference, but I am not certain in English. I am learning it.

Regards:

Jarek

Dne 18-05-2019 v 21:13 Ralf Kefferpuetz napsal(a):
Hello,

I have written an addon for Total Commander 32bit and 64bit.
You can download it here:
https://github.com/Novalis7747/totalcmd-enhanced/raw/master/totalcmd-0.6.2.nvda-addon
It has some features and it speaks left/right also for the 64bit version.

Cheers,
   Ralf

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Jarek.Krcmar
Sent: Samstag, 18. Mai 2019 18:19
To: nvda@nvda.groups.io
Subject: [nvda] Nvda, Total Commander and its' panels

Greetings to all
I have both Free Commander and Total Commander installed on my computer.
I thought Nvda would announce the panels at Total Commander, but it wasn't.
When I press Nvda + T, only the Total Commander window is reported. The Tab key does not report panels.
So I want to ask if any of you are using Total Commander, and whether it will ever be implemented into Nvda by
announcing panels in Total Commander.
Regards:
Jarek









Re: Nvda, Total Commander and its' panels

Jarek.Krcmar
 

greetintgs,


I have downloaded and installed the TotalCmd Nvda addon, and after restarting Nvda mi started Total Commander 32 bit.

I found out, That the panels are anounced.

Thank you very much and excuse my English.

I have written to this conference, but I am not certain in English. I am learning it.

Regards:

Jarek

Dne 18-05-2019 v 21:13 Ralf Kefferpuetz napsal(a):

Hello,

I have written an addon for Total Commander 32bit and 64bit.
You can download it here:
https://github.com/Novalis7747/totalcmd-enhanced/raw/master/totalcmd-0.6.2.nvda-addon
It has some features and it speaks left/right also for the 64bit version.

Cheers,
Ralf

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Jarek.Krcmar
Sent: Samstag, 18. Mai 2019 18:19
To: nvda@nvda.groups.io
Subject: [nvda] Nvda, Total Commander and its' panels

Greetings to all
I have both Free Commander and Total Commander installed on my computer.
I thought Nvda would announce the panels at Total Commander, but it wasn't.
When I press Nvda + T, only the Total Commander window is reported. The Tab key does not report panels.
So I want to ask if any of you are using Total Commander, and whether it will ever be implemented into Nvda by
announcing panels in Total Commander.
Regards:
Jarek







Re: Nvda, Total Commander and its' panels

Ralf Kefferpuetz
 

Hello,

I have written an addon for Total Commander 32bit and 64bit.
You can download it here:
https://github.com/Novalis7747/totalcmd-enhanced/raw/master/totalcmd-0.6.2.nvda-addon
It has some features and it speaks left/right also for the 64bit version.

Cheers,
Ralf

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Jarek.Krcmar
Sent: Samstag, 18. Mai 2019 18:19
To: nvda@nvda.groups.io
Subject: [nvda] Nvda, Total Commander and its' panels

Greetings to all
I have both Free Commander and Total Commander installed on my computer.
I thought Nvda would announce the panels at Total Commander, but it wasn't.
When I press Nvda + T, only the Total Commander window is reported. The Tab key does not report panels.
So I want to ask if any of you are using Total Commander, and whether it will ever be implemented into Nvda by
announcing panels in Total Commander.
Regards:
Jarek


Re: Nvda, Total Commander and its' panels

Ralf Kefferpuetz
 

Only in the 32bit version with the NVDA built-in appModule.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Mallard
Sent: Samstag, 18. Mai 2019 19:00
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda, Total Commander and its' panels

Hello,


Total Commander does indeed announce the panels, but you don't hhhave to press anything otherthan tab, to move between
one panel and the other.


I've used it for about 20 years or more now, with Jaws first and, since
2009, with NVDA.


The good thing, compared to Free Commander, is that it announces panels,
amongst otherthings.


Try simply tabbing, and let me know whether it works for you.

Ciao,

Ollie




Il 18/05/2019 18:19, Jarek.Krcmar ha scritto:
Greetings to all
I have both Free Commander and Total Commander installed on my computer.
I thought Nvda would announce the panels at Total Commander, but it
wasn't.
When I press Nvda + T, only the Total Commander window is reported.
The Tab key does not report panels.
So I want to ask if any of you are using Total Commander, and whether
it will ever be implemented into Nvda by announcing panels in Total
Commander.
Regards:
Jarek





Re: Nvda, Total Commander and its' panels

Ralf Kefferpuetz
 

The 32bit version does annonce it the 64bit version not.

That’s what my addon is for….

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Samstag, 18. Mai 2019 19:17
To: nvda@nvda.groups.io
Subject: Re: [nvda] Nvda, Total Commander and its' panels

 

This has evidently already been tried as the message says that the tab key doesn't report panels.  So if it works in your case, perhaps some difference in settings may be found by comparison.  I don't use the program so I can't discuss anything except the possibility that maximizing the program may solve the problem if it isn't maximized.  If it is maximized, try normalizing it.  Aside from that, perhaps a comparison of settings in the program might help.

 

Also, it might be useful to test the program with a JAWS demo on the machine where panels aren't being announced.

 

I just thought of one other possibility but I have no idea if it could make a difference.  You might try changing the screen resolution.  Comparing the current resolutions between the two computers might be a good idea before experimenting.

 

Gene

----- Original Message -----

From: Mallard

Sent: Saturday, May 18, 2019 11:59 AM

Subject: Re: [nvda] Nvda, Total Commander and its' panels

 

Hello,


Total Commander does indeed announce the panels, but you don't hhhave to
press anything otherthan tab, to move between one panel and the other.


I've used it for about 20 years or more now, with Jaws first and, since
2009, with NVDA.


The good thing, compared to Free Commander, is that it announces panels,
amongst otherthings.


Try simply tabbing, and let me know whether it works for you.

Ciao,

Ollie




Il 18/05/2019 18:19, Jarek.Krcmar ha scritto:
> Greetings to all
> I have both Free Commander and Total Commander installed on my computer.
> I thought Nvda would announce the panels at Total Commander, but it
> wasn't.
> When I press Nvda + T, only the Total Commander window is reported.
> The Tab key does not report panels.
> So I want to ask if any of you are using Total Commander, and whether
> it will ever be implemented into Nvda by announcing panels in Total
> Commander.
> Regards:
> Jarek
>
>
>
>
>


Re: Nvda, Total Commander and its' panels

Gene
 

This has evidently already been tried as the message says that the tab key doesn't report panels.  So if it works in your case, perhaps some difference in settings may be found by comparison.  I don't use the program so I can't discuss anything except the possibility that maximizing the program may solve the problem if it isn't maximized.  If it is maximized, try normalizing it.  Aside from that, perhaps a comparison of settings in the program might help.
 
Also, it might be useful to test the program with a JAWS demo on the machine where panels aren't being announced.
 
I just thought of one other possibility but I have no idea if it could make a difference.  You might try changing the screen resolution.  Comparing the current resolutions between the two computers might be a good idea before experimenting.
 
Gene

----- Original Message -----
From: Mallard
Sent: Saturday, May 18, 2019 11:59 AM
Subject: Re: [nvda] Nvda, Total Commander and its' panels

Hello,


Total Commander does indeed announce the panels, but you don't hhhave to
press anything otherthan tab, to move between one panel and the other.


I've used it for about 20 years or more now, with Jaws first and, since
2009, with NVDA.


The good thing, compared to Free Commander, is that it announces panels,
amongst otherthings.


Try simply tabbing, and let me know whether it works for you.

Ciao,

Ollie




Il 18/05/2019 18:19, Jarek.Krcmar ha scritto:
> Greetings to all
> I have both Free Commander and Total Commander installed on my computer.
> I thought Nvda would announce the panels at Total Commander, but it
> wasn't.
> When I press Nvda + T, only the Total Commander window is reported.
> The Tab key does not report panels.
> So I want to ask if any of you are using Total Commander, and whether
> it will ever be implemented into Nvda by announcing panels in Total
> Commander.
> Regards:
> Jarek
>
>
>
>
>



Re: Nvda, Total Commander and its' panels

 

It is clear that Total Commander is not exposing things to the screen reader either because it's coded "irregularly" or uses old Windows style code while NVDA is trying to keep up with more recent versions.  Like all applications that fall into this group, that means an add-on would need to be created to make it accessible.

It is not a part of the core function of NVDA to make every application that exists accessible, and that's why the multitude of add-ons exist, and one already exists.

The fact that Total Commander is just a jazzed up version of File Explorer, which will very soon be getting a tabbed version under Windows 10, makes it quite unlikely that anyone is going to devote any new effort to this at this time, but the existing one should work.

A web search on "Total Commander NVDA Add-On" turns up two pertinent topics, one on this very group and another on the freelists NVDA Add-Ons list:

https://www.freelists.org/post/nvda-addons/total-commander-and-nvda,2

https://nvda.groups.io/g/nvda/topic/24876251  

which gives the direct link to an existing NVDA Add-On called Total Commander enhanced on Github (and whose author has posted recently to one of the blind technology lists) that has been updated to work with NVDA 2019.1:  https://github.com/Novalis7747/totalcmd-enhanced

This is why doing web searches is absolutely essential, and something that should be done first, before asking anywhere.  I learned all of the above from a simple web search on "Total Commander NVDA Add-On" and looking strictly at the first six returned results, digging a bit further into the links given in the post from this group noted above.

--

Brian - Windows 10 Pro, 64-Bit, Version 1809, Build 17763  

Puritanism:  The haunting fear that someone, somewhere, may be happy.

        ~ H.L. Mencken

 

 


Re: Nvda, Total Commander and its' panels

Mallard
 

Hello,


Total Commander does indeed announce the panels, but you don't hhhave to press anything otherthan tab, to move between one panel and the other.


I've used it for about 20 years or more now, with Jaws first and, since 2009, with NVDA.


The good thing, compared to Free Commander, is that it announces panels, amongst otherthings.


Try simply tabbing, and let me know whether it works for you.

Ciao,

Ollie

Il 18/05/2019 18:19, Jarek.Krcmar ha scritto:
Greetings to all
I have both Free Commander and Total Commander installed on my computer.
I thought Nvda would announce the panels at Total Commander, but it wasn't.
When I press Nvda + T, only the Total Commander window is reported. The Tab key does not report panels.
So I want to ask if any of you are using Total Commander, and whether it will ever be implemented into Nvda by announcing panels in Total Commander.
Regards:
Jarek




Nvda, Total Commander and its' panels

Jarek.Krcmar
 

Greetings to all
I have both Free Commander and Total Commander installed on my computer.
I thought Nvda would announce the panels at Total Commander, but it wasn't.
When I press Nvda + T, only the Total Commander window is reported. The Tab key does not report panels.
So I want to ask if any of you are using Total Commander, and whether it will ever be implemented into Nvda by announcing panels in Total Commander.
Regards:
Jarek


New add-on for Brother Utilities app

Rui Fontes
 

Hello!

It is available an add-on to labell the buttons of this app, used for the Broter printers and multifunctionals and to gave some hints...

The code is available in:
https://github.com/ruifontes/BrLauncher

Direct download:
https://github.com/ruifontes/BrLauncher/releases/download/1.0/BrLauncher-1.0.nvda-addon

Best regards,

Rui Fontes
NVDA portuguese team
Tiflotecnia, Lda.