Date   

Re: Announcing cut, copy, or paste

Gene
 

If what I said isn't clear, when you are in browse mode, you will hear the announcements without the add-on.  The add-on, evidently, becomes inactive when you are in browse mode to allow for the announcement NVDA makes itself.
 
Gene

----- Original Message -----
From: Gene
Sent: Thursday, April 11, 2019 11:53 PM
Subject: Re: [nvda] Announcing cut, copy, or paste

not when you are in browse mode, which is why I didn't make it a blanket statement.
 
Gene
----- Original Message -----
From: cisco
Sent: Thursday, April 11, 2019 11:34 PM
Subject: Re: [nvda] Announcing cut, copy, or paste

Actually you have to have the ad on for things like that to be announced


On Apr 12, 2019, at 6:16 AM, Gene <gsasner@...> wrote:

I'm not sure what you are asking.  Are you asking about cutting text, then adding more text when you cut more?  I don't know what the command does that you are describing and you already know about control x for cutting text, which is a Windows command.  The Clipspeak add-on causes NVDA to announce that text is copied, cut, or pasted.  In many circumstances, it doesn't announce those things without the add-on but just what does the JAWS command do?
 
Gene 
----- Original Message -----
From: Judy Jones
Sent: Thursday, April 11, 2019 9:34 PM
Subject: [nvda] Announcing cut, copy, or paste

Hello To All,

 

Can NVDA be set to announc “cut text to clipboard,” as Jaws does when you use control-X?

 

I ran into this when wanting to paste a link into an e-mail.  In Jaws you hit Alt-D, A, and C to get this done.  I did manage to copy to clipboard, but didn’t hear it spoken, so pulled up notepad to make sure I actually had copied the address.

 

It would seem easier if you could hear that your commands are carried out.

 

Thanks as always.

 

Judy

“Embrace the day with its mercies and blessings.”

 


Re: Remove beeps from list of emails

Gene
 

you can check but what I saw didn't go into all that detail.  You can see if I missed something, though I don't think I did.
 
Gene

----- Original Message -----
From: Joseph Lee
Sent: Thursday, April 11, 2019 11:48 PM
Subject: Re: [nvda] Remove beeps from list of emails

Hi,

At a nutshell, this add-on will beep the screen coordinate of the object one is moving to. This is applicable to both navigator object and system focus. This is the reason why the beep is heard.

I’d be curious to know if this happened with other apps – any app that presents controls that can be arrowed through (such as files and folders list in File Explorer) will exhibit this behavior.

The NVDA Core version of this add-on (pending approval from NV Access people as it was reviewed not long ago) will let users configure this setting:

  • No beep
  • Only beep for system focus changes
  • Beep for object navigation commands
  • Both system focus and object navigation

 

The intended purpose of Object Location Tones add-on (and the NVDA Core version of that) is to let users know where things are on screen – to serve as a screen orientation aid for those needing it. An equivalent functionality for touchscreens is part of Enhanced Touch Gestures (some portions of that add-on will be packaged as a pull request for NVDA later). If I didn’t spell that out clearly on add-ons page, I sincerely apologize (a huge failure on my part, which I need to address before I go down to Santa Ana, California for a national speech tournament next week).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Thursday, April 11, 2019 9:41 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Remove beeps from list of emails

 

So, as I understand the description, this is only supposed to happen when using Object navigation and moving the navigator with the navigator movement keys.  I wonder what it is in Outlook that causes the beeps to sound when the navigator is moved as it follows the application as used from the main keyboard?

 

Gene

----- Original Message -----

From: Joseph Lee

Sent: Thursday, April 11, 2019 7:43 PM

Subject: Re: [nvda] Remove beeps from list of emails

 

Hi,

That’s my conclusion as well.

That add-on is meant to be a proof of concept implementation of the following NVDA issue:

https://github.com/nvaccess/nvda/issues/2559

 

Luckily, the NVDA Core implementation of this add-on will be sensitive to configuration profiles – it is just awaiting code review at the moment.
Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Thursday, April 11, 2019 2:50 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Remove beeps from list of emails

 

I just checked.  The name of the add-on is object location tones. 
The description says, "After installing this add-on and restarting NVDA (or when you enable this add-on), as you navigate to different controls, you'll hear tones to indicate where the object is located on screen."  It is evidently seeing items in Outlook like different messages in the list as controls.  I assume from the fact that you don't complain about this in other programs such as Windows Explorer, that this generally doesn't happen.

 

That also explains why when you turned off the object navigator moving as you moved in the application, that no beeps were heard.  the object navigator didn't move and the add-on was therefore unaware that you were moving in the application. 

 

Gene

----- Original Message -----

Sent: Thursday, April 11, 2019 4:36 PM

Subject: Re: [nvda] Remove beeps from list of emails

 

Joseph,

 

I went into the ad on manager and disabled your beep add-on and the problem has gone away! Now when I toggle NVDA+7 to either on or off there is no more beeping!

 

This is a brutal way to resolve the problem but it is a relief. However, I would like to understand what was happening and why I could not simply toggle the beeps on or off without losing the ability to Trak the cursor.

 

 

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

 


list

slery <slerythema@...>
 

Apparently, in my vast backlog of emails I have missed something regarding the policy of this list.

 

As it appears one is to use the archives for beginner questions, where can I find a list that is only for beginner NVDA users?

 

I have no knowledge to contribute to this list and as my archive skills are always lacking (even when looking for replies to my own messages from a year ago), I will not bother this list with any more questions. In fact, I will probably leave at the beginning of next week and only stick around long enough for something to tell me where the beginner list is.

 

Cindy


Re: Announcing cut, copy, or paste

Judy Jones <sonshines59@...>
 

Thank you, Gene,

 

Now that you mention it, I would rather try your way first, but I will surely have to explore those add-ons.

 

Thanks again.

 

Judy

“Embrace the day with its mercies and blessings.”

 

From: nvda@nvda.groups.io [mailto:nvda@nvda.groups.io] On Behalf Of hurrikennyandopo ...
Sent: Thursday, April 11, 2019 7:57 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Announcing cut, copy, or paste

 

Hi Judy

 

you could try the following add on it should do what you want it to do.

it is called clip speak.

 

It will need to be installed.

 

I do not use it if i copy any thing i do not need to know or hear it say copy etc I just copy what i want then use the nvda key +letter C to read out what i have copied.

 

there are probably other add ons up there you might use as well.

The following link will put you in the right place to get it at https://addons.nvda-project.org/index.en.html

It can also be accessed thrugh the add on manager under a button called get add ons in that section.

 

 

hope it helps.

 

Gene nz

 

 

On 12/04/2019 2:34 PM, Judy Jones wrote:

Hello To All,

 

Can NVDA be set to announc “cut text to clipboard,” as Jaws does when you use control-X?

 

I ran into this when wanting to paste a link into an e-mail.  In Jaws you hit Alt-D, A, and C to get this done.  I did manage to copy to clipboard, but didn’t hear it spoken, so pulled up notepad to make sure I actually had copied the address.

 

It would seem easier if you could hear that your commands are carried out.

 

Thanks as always.

 

Judy

“Embrace the day with its mercies and blessings.”

 

--

Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net
 
Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which location (or locations) are nearest to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa).
To find out which software is installed on the APNK network please visit the following link http://www.aotearoapeoplesnetwork.info/faq/software To find out how to use NVDA on APNK computers please visit the following link http://www.aotearoapeoplesnetwork.info/faq/nvda
 

To find out which software is available on the Christchurch City Library network, and how to start the NVDA screen reader, please go to the following links. Software available  https://my.christchurchcitylibraries.com/faq/computers/#faq_5884  How to start the NVDA screen reader on Christchurch City Library computers  https://my.christchurchcitylibraries.com/faqs/what-screen-reader-software-is-available/
 
To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.



Re: transfering music onto iPad with NVDA and latest iTunes

Robert Doc Wright godfearer
 

If you still have the mp3’s available that you used to burn the cd’s on your computer, you can paste those same folders into iTunes.

 

                                                                                                                                If all I have left in this world is God, I have everything!                                                                                                                                                                                                                                                                                                                                                Sent from Mail for Windows 10

 

From: Armando Maldonado
Sent: Wednesday, April 10, 2019 7:49 PM
To: nvda@nvda.groups.io
Subject: [nvda] transfering music onto iPad with NVDA and latest iTunes

 

Hello, I had just burned some CDS for mom which are not available on any music streaming services such as spotify, apple Music, etc. My question, is there an easy way to transfer what I converted from her cds onto her iPad using the latest iTunes 12.9.4? Any help is appreciated.
Armando

 


Re: Announcing cut, copy, or paste

Gene
 

not when you are in browse mode, which is why I didn't make it a blanket statement.
 
Gene

----- Original Message -----
From: cisco
Sent: Thursday, April 11, 2019 11:34 PM
Subject: Re: [nvda] Announcing cut, copy, or paste

Actually you have to have the ad on for things like that to be announced


On Apr 12, 2019, at 6:16 AM, Gene <gsasner@...> wrote:

I'm not sure what you are asking.  Are you asking about cutting text, then adding more text when you cut more?  I don't know what the command does that you are describing and you already know about control x for cutting text, which is a Windows command.  The Clipspeak add-on causes NVDA to announce that text is copied, cut, or pasted.  In many circumstances, it doesn't announce those things without the add-on but just what does the JAWS command do?
 
Gene 
----- Original Message -----
From: Judy Jones
Sent: Thursday, April 11, 2019 9:34 PM
Subject: [nvda] Announcing cut, copy, or paste

Hello To All,

 

Can NVDA be set to announc “cut text to clipboard,” as Jaws does when you use control-X?

 

I ran into this when wanting to paste a link into an e-mail.  In Jaws you hit Alt-D, A, and C to get this done.  I did manage to copy to clipboard, but didn’t hear it spoken, so pulled up notepad to make sure I actually had copied the address.

 

It would seem easier if you could hear that your commands are carried out.

 

Thanks as always.

 

Judy

“Embrace the day with its mercies and blessings.”

 


BARD express

Robert Doc Wright godfearer
 

If any of the developers are using this windows program can you see if there is a way to have all of the annotation read?

 

                                                                                                                                If all I have left in this world is God, I have everything!                                                                                                                                                                                                                                                                                                                                                Sent from Mail for Windows 10

 


Re: Remove beeps from list of emails

 

Hi,

At a nutshell, this add-on will beep the screen coordinate of the object one is moving to. This is applicable to both navigator object and system focus. This is the reason why the beep is heard.

I’d be curious to know if this happened with other apps – any app that presents controls that can be arrowed through (such as files and folders list in File Explorer) will exhibit this behavior.

The NVDA Core version of this add-on (pending approval from NV Access people as it was reviewed not long ago) will let users configure this setting:

  • No beep
  • Only beep for system focus changes
  • Beep for object navigation commands
  • Both system focus and object navigation

 

The intended purpose of Object Location Tones add-on (and the NVDA Core version of that) is to let users know where things are on screen – to serve as a screen orientation aid for those needing it. An equivalent functionality for touchscreens is part of Enhanced Touch Gestures (some portions of that add-on will be packaged as a pull request for NVDA later). If I didn’t spell that out clearly on add-ons page, I sincerely apologize (a huge failure on my part, which I need to address before I go down to Santa Ana, California for a national speech tournament next week).

Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Thursday, April 11, 2019 9:41 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Remove beeps from list of emails

 

So, as I understand the description, this is only supposed to happen when using Object navigation and moving the navigator with the navigator movement keys.  I wonder what it is in Outlook that causes the beeps to sound when the navigator is moved as it follows the application as used from the main keyboard?

 

Gene

----- Original Message -----

From: Joseph Lee

Sent: Thursday, April 11, 2019 7:43 PM

Subject: Re: [nvda] Remove beeps from list of emails

 

Hi,

That’s my conclusion as well.

That add-on is meant to be a proof of concept implementation of the following NVDA issue:

https://github.com/nvaccess/nvda/issues/2559

 

Luckily, the NVDA Core implementation of this add-on will be sensitive to configuration profiles – it is just awaiting code review at the moment.
Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Thursday, April 11, 2019 2:50 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Remove beeps from list of emails

 

I just checked.  The name of the add-on is object location tones. 
The description says, "After installing this add-on and restarting NVDA (or when you enable this add-on), as you navigate to different controls, you'll hear tones to indicate where the object is located on screen."  It is evidently seeing items in Outlook like different messages in the list as controls.  I assume from the fact that you don't complain about this in other programs such as Windows Explorer, that this generally doesn't happen.

 

That also explains why when you turned off the object navigator moving as you moved in the application, that no beeps were heard.  the object navigator didn't move and the add-on was therefore unaware that you were moving in the application. 

 

Gene

----- Original Message -----

Sent: Thursday, April 11, 2019 4:36 PM

Subject: Re: [nvda] Remove beeps from list of emails

 

Joseph,

 

I went into the ad on manager and disabled your beep add-on and the problem has gone away! Now when I toggle NVDA+7 to either on or off there is no more beeping!

 

This is a brutal way to resolve the problem but it is a relief. However, I would like to understand what was happening and why I could not simply toggle the beeps on or off without losing the ability to Trak the cursor.

 

 

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

 


Re: Remove beeps from list of emails

Gene
 

So, as I understand the description, this is only supposed to happen when using Object navigation and moving the navigator with the navigator movement keys.  I wonder what it is in Outlook that causes the beeps to sound when the navigator is moved as it follows the application as used from the main keyboard?
 
Gene

----- Original Message -----
From: Joseph Lee
Sent: Thursday, April 11, 2019 7:43 PM
Subject: Re: [nvda] Remove beeps from list of emails

Hi,

That’s my conclusion as well.

That add-on is meant to be a proof of concept implementation of the following NVDA issue:

https://github.com/nvaccess/nvda/issues/2559

 

Luckily, the NVDA Core implementation of this add-on will be sensitive to configuration profiles – it is just awaiting code review at the moment.
Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Thursday, April 11, 2019 2:50 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Remove beeps from list of emails

 

I just checked.  The name of the add-on is object location tones. 
The description says, "After installing this add-on and restarting NVDA (or when you enable this add-on), as you navigate to different controls, you'll hear tones to indicate where the object is located on screen."  It is evidently seeing items in Outlook like different messages in the list as controls.  I assume from the fact that you don't complain about this in other programs such as Windows Explorer, that this generally doesn't happen.

 

That also explains why when you turned off the object navigator moving as you moved in the application, that no beeps were heard.  the object navigator didn't move and the add-on was therefore unaware that you were moving in the application. 

 

Gene

----- Original Message -----

Sent: Thursday, April 11, 2019 4:36 PM

Subject: Re: [nvda] Remove beeps from list of emails

 

Joseph,

 

I went into the ad on manager and disabled your beep add-on and the problem has gone away! Now when I toggle NVDA+7 to either on or off there is no more beeping!

 

This is a brutal way to resolve the problem but it is a relief. However, I would like to understand what was happening and why I could not simply toggle the beeps on or off without losing the ability to Trak the cursor.

 

 

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

 


Re: Announcing cut, copy, or paste

cisco <audiogamer2004@...>
 

Actually you have to have the ad on for things like that to be announced


On Apr 12, 2019, at 6:16 AM, Gene <gsasner@...> wrote:

I'm not sure what you are asking.  Are you asking about cutting text, then adding more text when you cut more?  I don't know what the command does that you are describing and you already know about control x for cutting text, which is a Windows command.  The Clipspeak add-on causes NVDA to announce that text is copied, cut, or pasted.  In many circumstances, it doesn't announce those things without the add-on but just what does the JAWS command do?
 
Gene 
----- Original Message -----
From: Judy Jones
Sent: Thursday, April 11, 2019 9:34 PM
Subject: [nvda] Announcing cut, copy, or paste

Hello To All,

 

Can NVDA be set to announc “cut text to clipboard,” as Jaws does when you use control-X?

 

I ran into this when wanting to paste a link into an e-mail.  In Jaws you hit Alt-D, A, and C to get this done.  I did manage to copy to clipboard, but didn’t hear it spoken, so pulled up notepad to make sure I actually had copied the address.

 

It would seem easier if you could hear that your commands are carried out.

 

Thanks as always.

 

Judy

“Embrace the day with its mercies and blessings.”

 


Re: Announcing cut, copy, or paste

cisco <audiogamer2004@...>
 

Hi there. She’s talking about the clipspeac ad on.


On Apr 12, 2019, at 6:16 AM, Gene <gsasner@...> wrote:

I'm not sure what you are asking.  Are you asking about cutting text, then adding more text when you cut more?  I don't know what the command does that you are describing and you already know about control x for cutting text, which is a Windows command.  The Clipspeak add-on causes NVDA to announce that text is copied, cut, or pasted.  In many circumstances, it doesn't announce those things without the add-on but just what does the JAWS command do?
 
Gene 
----- Original Message -----
From: Judy Jones
Sent: Thursday, April 11, 2019 9:34 PM
Subject: [nvda] Announcing cut, copy, or paste

Hello To All,

 

Can NVDA be set to announc “cut text to clipboard,” as Jaws does when you use control-X?

 

I ran into this when wanting to paste a link into an e-mail.  In Jaws you hit Alt-D, A, and C to get this done.  I did manage to copy to clipboard, but didn’t hear it spoken, so pulled up notepad to make sure I actually had copied the address.

 

It would seem easier if you could hear that your commands are carried out.

 

Thanks as always.

 

Judy

“Embrace the day with its mercies and blessings.”

 


Re: Announcing cut, copy, or paste

Gene
 

I now understand your message.  The add-on will cause the action to be announced but you are not discussing a JAWS command when you speak of alt followed by the letters.  That is a program command.  And control x is a Windows command.  You can cut text just by using control x.  The Windows command for copying text to the clipboard is control c.  It is much more convenient to use those commands.  The add-on will cause the announcement to be made when you use control x and control c. and JAWS will speak the actions as well.
 
Gene

----- Original Message -----
From: Judy Jones
Sent: Thursday, April 11, 2019 9:34 PM
Subject: [nvda] Announcing cut, copy, or paste

Hello To All,

 

Can NVDA be set to announc “cut text to clipboard,” as Jaws does when you use control-X?

 

I ran into this when wanting to paste a link into an e-mail.  In Jaws you hit Alt-D, A, and C to get this done.  I did manage to copy to clipboard, but didn’t hear it spoken, so pulled up notepad to make sure I actually had copied the address.

 

It would seem easier if you could hear that your commands are carried out.

 

Thanks as always.

 

Judy

“Embrace the day with its mercies and blessings.”

 


Re: Announcing cut, copy, or paste

Gene
 

I'm not sure what you are asking.  Are you asking about cutting text, then adding more text when you cut more?  I don't know what the command does that you are describing and you already know about control x for cutting text, which is a Windows command.  The Clipspeak add-on causes NVDA to announce that text is copied, cut, or pasted.  In many circumstances, it doesn't announce those things without the add-on but just what does the JAWS command do?
 
Gene 

----- Original Message -----
From: Judy Jones
Sent: Thursday, April 11, 2019 9:34 PM
Subject: [nvda] Announcing cut, copy, or paste

Hello To All,

 

Can NVDA be set to announc “cut text to clipboard,” as Jaws does when you use control-X?

 

I ran into this when wanting to paste a link into an e-mail.  In Jaws you hit Alt-D, A, and C to get this done.  I did manage to copy to clipboard, but didn’t hear it spoken, so pulled up notepad to make sure I actually had copied the address.

 

It would seem easier if you could hear that your commands are carried out.

 

Thanks as always.

 

Judy

“Embrace the day with its mercies and blessings.”

 


Re: Making pop-up notifications go away

Robert Doc Wright godfearer
 

 

 

                                                                                                                                If all I have left in this world is God, I have everything!                                                                                                                                                                                                                                                                                                                                                Sent from Mail for Windows 10

 


Re: Making pop-up notifications go away

Robert Doc Wright godfearer
 

When you speak of read-only is this the same as protected? Many rtf files I open are reported as protected view? If you wish to change this status you do a control s and a pop-up giving you the option to enable saving.

 

                                                                                                                                If all I have left in this world is God, I have everything!                                                                                                                                                                                                                                                                                                                                                Sent from Mail for Windows 10

 

From: Andre Fisher
Sent: Thursday, April 11, 2019 5:24 AM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Making pop-up notifications go away

 

Hi.

I think this subject can be solved by the use of NVDA only, as opposed to any screen reader, so the user cannot be faulted from posting to the list.

NVDA, by default, reads the notifications, that used to be called toasts. Turning off the reading of these notifications using the report notifications checkbox in the object presentation settings can allow NVDA to not report them, but they will still show up on screen. If your students are sighted, this might not be the right option, but it is certainly one of them.

Of course, you could just turn on Focus Assist in Windows 10 itself (if using that OS)

 


Re: Announcing cut, copy, or paste

hurrikennyandopo ...
 

Hi Judy


you could try the following add on it should do what you want it to do.

it is called clip speak.


It will need to be installed.


I do not use it if i copy any thing i do not need to know or hear it say copy etc I just copy what i want then use the nvda key +letter C to read out what i have copied.


there are probably other add ons up there you might use as well.

The following link will put you in the right place to get it at https://addons.nvda-project.org/index.en.html

It can also be accessed thrugh the add on manager under a button called get add ons in that section.



hope it helps.


Gene nz



On 12/04/2019 2:34 PM, Judy Jones wrote:

Hello To All,

 

Can NVDA be set to announc “cut text to clipboard,” as Jaws does when you use control-X?

 

I ran into this when wanting to paste a link into an e-mail.  In Jaws you hit Alt-D, A, and C to get this done.  I did manage to copy to clipboard, but didn’t hear it spoken, so pulled up notepad to make sure I actually had copied the address.

 

It would seem easier if you could hear that your commands are carried out.

 

Thanks as always.

 

Judy

“Embrace the day with its mercies and blessings.”

 

--
Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net
 
Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which location (or locations) are nearest to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa).
To find out which software is installed on the APNK network please visit the following link http://www.aotearoapeoplesnetwork.info/faq/software To find out how to use NVDA on APNK computers please visit the following link http://www.aotearoapeoplesnetwork.info/faq/nvda
 

To find out which software is available on the Christchurch City Library network, and how to start the NVDA screen reader, please go to the following links. Software available  https://my.christchurchcitylibraries.com/faq/computers/#faq_5884  How to start the NVDA screen reader on Christchurch City Library computers  https://my.christchurchcitylibraries.com/faqs/what-screen-reader-software-is-available/
 
To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.


Announcing cut, copy, or paste

Judy Jones <sonshines59@...>
 

Hello To All,

 

Can NVDA be set to announc “cut text to clipboard,” as Jaws does when you use control-X?

 

I ran into this when wanting to paste a link into an e-mail.  In Jaws you hit Alt-D, A, and C to get this done.  I did manage to copy to clipboard, but didn’t hear it spoken, so pulled up notepad to make sure I actually had copied the address.

 

It would seem easier if you could hear that your commands are carried out.

 

Thanks as always.

 

Judy

“Embrace the day with its mercies and blessings.”

 


Re: Reaper Tutorial

Blaster
 

Howard, Sorry for the confusion, JMCasey is right, it's the first
page of the tutorial and it's hosted on a gaming site. Anyway, that's
the link that was posted and there's nothing else to do but start
reading from the first post on. It's mostly active students chatting
back and forth, so it's a quick read to catch up. I'm not
participating in the class, but I've been lurking in the weeds, lol.
Anyway, it's very interesting.

So to keep this list on track, anyone interested in Reaper should join
the "reaper without peepers" list here:

Reaper without peepers on groups.io:
rwp+subscribe@groups.io

By the way, the CAVI instructors and many very talented reaper users
inhabit the list and all levels of users are welcome to join. Here's a
list of resources that are posted at the bottom of each RWP posting,
enjoy, Blaster


Download Reaper from:
https://www.reaper.fm/download.php

OSARA: Open Source Accessibility for the Reaper Application lives at:
https://osara.reaperaccessibility.com

SWS (a handy set of extensions that make Reaper even smarter) can be found at:
http://www.sws-extension.org/

For audio tutorials, and a stellar effort to document Reaper related
stuff from a blindness perspective, check out:
www.reaperaccessibility.com

On 4/11/19, JM Casey <jmcasey@teksavvy.com> wrote:
Hi.

The person earlier in the thread (sorry, I can't remember who it was) linked
you to the first page of the forum thread. You didn't read the whole page.

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Howard Traxler
Sent: April 10, 2019 10:38 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] reaper totorial



Over there, all I saw was game stuff. How to find audio reefer tutorials?


On 4/10/2019 8:17 PM, Blaster wrote:
There's a reaper beginners live course taking place right now over at:

https://forum.audiogames.net/topic/28100/accessible-sound-design-first
-lesson-up-interaction-ending-134/page/1/

The instructor is sighted and has taken it upon himself to learn NVDA
on-the-fly to teach sound designing using reaper, enjoy!

HTH,
Blaster



On 4/10/19, Armando Maldonado <armando.maldonado0767@gmail.com> wrote:
Hello, try this link as CAVI has made this public, enjoy.
http://cavi.xyz/audioplatinum
----- Original Message -----
From: "Adel Spence" <adelspence12@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Wednesday, April 10, 2019 5:17 PM
Subject: Re: [nvda] reaper totorial


so do I...
----- Original Message -----
From: "Nasir Mehmood" <smart.nasir46@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Wednesday, April 10, 2019 7:55 PM
Subject: [nvda] reaper totorial


hy friends i am nasir mehmood need me reaper totorial in text and
audio both please help me because i want to learn












Re: Remove beeps from list of emails

 

Hi,

That’s my conclusion as well.

That add-on is meant to be a proof of concept implementation of the following NVDA issue:

https://github.com/nvaccess/nvda/issues/2559

 

Luckily, the NVDA Core implementation of this add-on will be sensitive to configuration profiles – it is just awaiting code review at the moment.
Cheers,

Joseph

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Gene
Sent: Thursday, April 11, 2019 2:50 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Remove beeps from list of emails

 

I just checked.  The name of the add-on is object location tones. 
The description says, "After installing this add-on and restarting NVDA (or when you enable this add-on), as you navigate to different controls, you'll hear tones to indicate where the object is located on screen."  It is evidently seeing items in Outlook like different messages in the list as controls.  I assume from the fact that you don't complain about this in other programs such as Windows Explorer, that this generally doesn't happen.

 

That also explains why when you turned off the object navigator moving as you moved in the application, that no beeps were heard.  the object navigator didn't move and the add-on was therefore unaware that you were moving in the application. 

 

Gene

----- Original Message -----

Sent: Thursday, April 11, 2019 4:36 PM

Subject: Re: [nvda] Remove beeps from list of emails

 

Joseph,

 

I went into the ad on manager and disabled your beep add-on and the problem has gone away! Now when I toggle NVDA+7 to either on or off there is no more beeping!

 

This is a brutal way to resolve the problem but it is a relief. However, I would like to understand what was happening and why I could not simply toggle the beeps on or off without losing the ability to Trak the cursor.

 

 

 

All the best,

 

Cearbhall

 

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@...

 

 

 


Mozilla seems to have changed the options window, again

 

Hey folks,
So the subject speaks for itself.
Some of you may remember me from the other thread about the add-ons' section, isn't it?
Well, here we are again. Now, though, the situation is in fact at least a little bit better.
Our dear mozilla, on what I believe to be the latest Firefox, changed in a way the options' window, where we have general, privacy and such.
At first, I was about to post here asking for a workaround for this one, but I found it myself.
The story is like that: being on said window, one can't, for their life, arrow through the options anymore. Well, at least it was what I was getting.
Then, don't know why, but as a last resort I tried to play with the window using NVDA in focus mode.
Guess what? It worked!
In fact, I believe it worked because now in this very same window you have a search field where you can type in parts of what you want to get, for example "priva" for privacy. But, this field actually is also a submenu!
No, you haven't read it wrong. It's a field and a submenu, as NVDA reports it.
I'll have to say, that's the first time I've seen something like that. Quite odd, if you ask me.

Well, all of this to say that, if you getting the same as I got, then justdo the NVDA focus mode thing or the equivalent on your screen reader, tab through the screen and then at some point you'll be able to arrow through the options like we are used to do.
 
Cheers,
Marcio AKA Starboy
Follow or add me on Facebook