Date   

Re: What is the threshold snap shot used for?

Brian's Mail list account <bglists@...>
 

Is there not also a project to refractor sound handling as well?

For those interested, I had to hand amend all the add ons I use to stop them being disabled. The crucial bit is the text in the manifest saying what the last tested version of nvda was.
Warning, I'm doing my experiments on a portable version on the hard drive so I do not muck up the working version.
However if the flag for last working version is activated in the next version of nvda. most of the current add ons will be permanently disabled by default
I have taken the step to turn this protection off on this portable version but I suspect that come proper Python 3 etc many will cause nvda to malfunction. Some of the simpler ones will probably still work, but not all. Some suggest the only changes are new syntax, but the question is if the original author is missing in action, it is going to fall to somebody else to modify them.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal E-mail to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.

----- Original Message -----
From: "hurrikennyandopo ..." <hurrikennyandopo@hotmail.com>
To: <nvda@nvda.groups.io>
Sent: Sunday, May 05, 2019 10:01 PM
Subject: Re: [nvda] What is the threshold snap shot used for?


Hi


Ok that makes sense I heard there was chatter we are changing over before long to use it and things like add ons etc will need to be updated as well to work with it.

is it that we are starting to change from the next release of NVDA?


I would also have to go back and check on the same page it said there was a beta release of NVDA last week. yet when you download it it mentions nvda 2019.1 and not nvda 2019.2 as you would expect in a beta release. I would have to go back and check also it referenced what was new in 2019.1 and not in 2019.2 coming up.

It is for may 2nd 2019 maybe the wrong snap shot went up there?


Gene nz


On 6/05/2019 7:54 AM, Adriani Botez wrote:
This will be for python 3 branch.

Von: nvda@nvda.groups.io<mailto:nvda@nvda.groups.io> <nvda@nvda.groups.io><mailto:nvda@nvda.groups.io> Im Auftrag von hurrikennyandopo ...
Gesendet: Sonntag, 5. Mai 2019 21:54
An: nvda@nvda.groups.io<mailto:nvda@nvda.groups.io>
Betreff: [nvda] What is the threshold snap shot used for?


Hi guys



I was just looking up on the snap shots page to see if the beta was released of NVDA which it is, but noticed the above in the subject line above the aalpha snap shot. I know what the other 2 do but what does this one do that might be different? to the others?



There is no information to say what it does like the others.



The link to the page is https://www.nvaccess.org/files/nvda/snapshots/



Gene nz


--
[Image NVDA certified expert]
Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net

Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which location (or locations) are nearest to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa). To find out which software is installed on the APNK network please visit the following link http://www.aotearoapeoplesnetwork.info/faq/software To find out how to use NVDA on APNK computers please visit the following link http://www.aotearoapeoplesnetwork.info/faq/nvda

To find out which software is available on the Christchurch City Library network, and how to start the NVDA screen reader, please go to the following links. Software available https://my.christchurchcitylibraries.com/faq/computers/#faq_5884 How to start the NVDA screen reader on Christchurch City Library computers https://my.christchurchcitylibraries.com/faqs/what-screen-reader-software-is-available/

To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.



--
[Image NVDA certified expert]
Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net

Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which location (or locations) are nearest to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa). To find out which software is installed on the APNK network please visit the following link http://www.aotearoapeoplesnetwork.info/faq/software To find out how to use NVDA on APNK computers please visit the following link http://www.aotearoapeoplesnetwork.info/faq/nvda

To find out which software is available on the Christchurch City Library network, and how to start the NVDA screen reader, please go to the following links. Software available https://my.christchurchcitylibraries.com/faq/computers/#faq_5884 How to start the NVDA screen reader on Christchurch City Library computers https://my.christchurchcitylibraries.com/faqs/what-screen-reader-software-is-available/

To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.




locked Re: how to use review cursor on my windows 7 pc?

 

Remove avast and use something else its not been accessible for ages.



On 6/05/2019 5:22 PM, Quentin Christensen wrote:
Hi Sazid,

I am not using Avast, so can't help directly with that, but for learning to use the Review Cursor and Object Navigation, I would strongly recommend the "Basic Training for NVDA" training material.  While I could give you commands like NVDA+numpad 6 or NVDA+shift+right arrow to move to the next object and NVDA+numpad 4 or NVDA+shift+left arrow to move to the previous object.  However, without a better understanding of how it works, you will likely get lost, as they are fairly complex.

You can find more about the Basic Training for NVDA from the official shop: https://www.nvaccess.org/shop/

Kind regards

Quentin.

On Mon, May 6, 2019 at 3:02 PM sazid <skstraders.nlr@...> wrote:
hi Gene,
thanks for your quick reply,  as i am a beginner in learning assestive
technology please tell me what is speech viewer  how to use it and
uses of it?  please tell  me how to use review cursor?

On 5/6/19, Gene <gsasner@...> wrote:
> Are you asking how to use the cursors or how to get them to read something
> in Avast?  If you know how to use them fully and you can't read something in
> Avast, then it is very likely those cursors can't read the things you are
> trying to read with them.  It may be that if you route the JAWS cursor to a
> field you are in and then tab and shift tab, if the field is closing now in
> a short time, that it will remain opened and you can have it spoken in that
> way.  It may be that you can use the speech viewer to see what is said.
>
> Gene
> ----- Original Message -----
>
> From: sazid
> Sent: Sunday, May 05, 2019 11:34 PM
> To: nvda
> Subject: [nvda] how to use review cursor on my windows 7 pc?
>
>
> i am using avast anti virus on my pc as the nvda is not reading the
> text of the message given by avast.  how to read them?  how to enable
> review cursor as well as pc cursor?
>
> thanks and regards,
> sazid
>
>
>
>
>
>





--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


locked Re: how to use review cursor on my windows 7 pc?

sazid
 

thanks a lot my dear friends,

thanks and regards,
sazid<div id="DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2"><br />
<table style="border-top: 1px solid #D3D4DE;">
<tr>
<td style="width: 55px; padding-top: 13px;"><a
href="https://www.avast.com/en-in/recommend?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=default3&tag=36da8cc1-460e-4857-b5bf-87d3432a4669"
target="_blank"><img
src="https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif"
alt="" width="46" height="29" style="width: 46px; height: 29px;"
/></a></td>
<td style="width: 470px; padding-top: 12px; color: #41424e;
font-size: 13px; font-family: Arial, Helvetica, sans-serif;
line-height: 18px;">I’m protected online with Avast Free Antivirus. <a
href="https://www.avast.com/en-in/recommend?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=default3&tag=36da8cc1-460e-4857-b5bf-87d3432a4669"
target="_blank" style="color: #4453ea;">Get it here — it’s free
forever.</a>
</td>
</tr>
</table><a href="#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2" width="1"
height="1"></a></div>

On 5/6/19, Quentin Christensen <quentin@nvaccess.org> wrote:
Hi Sazid,

I am not using Avast, so can't help directly with that, but for learning to
use the Review Cursor and Object Navigation, I would strongly recommend the
"Basic Training for NVDA" training material. While I could give you
commands like NVDA+numpad 6 or NVDA+shift+right arrow to move to the next
object and NVDA+numpad 4 or NVDA+shift+left arrow to move to the previous
object. However, without a better understanding of how it works, you will
likely get lost, as they are fairly complex.

You can find more about the Basic Training for NVDA from the official shop:
https://www.nvaccess.org/shop/

Kind regards

Quentin.

On Mon, May 6, 2019 at 3:02 PM sazid <skstraders.nlr@gmail.com> wrote:

hi Gene,
thanks for your quick reply, as i am a beginner in learning assestive
technology please tell me what is speech viewer how to use it and
uses of it? please tell me how to use review cursor?

On 5/6/19, Gene <gsasner@gmail.com> wrote:
Are you asking how to use the cursors or how to get them to read
something
in Avast? If you know how to use them fully and you can't read
something in
Avast, then it is very likely those cursors can't read the things you
are
trying to read with them. It may be that if you route the JAWS cursor
to a
field you are in and then tab and shift tab, if the field is closing
now
in
a short time, that it will remain opened and you can have it spoken in
that
way. It may be that you can use the speech viewer to see what is said.

Gene
----- Original Message -----

From: sazid
Sent: Sunday, May 05, 2019 11:34 PM
To: nvda
Subject: [nvda] how to use review cursor on my windows 7 pc?


i am using avast anti virus on my pc as the nvda is not reading the
text of the message given by avast. how to read them? how to enable
review cursor as well as pc cursor?

thanks and regards,
sazid







--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available:
http://www.nvaccess.org/shop/

www.nvaccess.org
Facebook: http://www.facebook.com/NVAccess
Twitter: @NVAccess




locked Re: how to use review cursor on my windows 7 pc?

Quentin Christensen
 

Hi Sazid,

I am not using Avast, so can't help directly with that, but for learning to use the Review Cursor and Object Navigation, I would strongly recommend the "Basic Training for NVDA" training material.  While I could give you commands like NVDA+numpad 6 or NVDA+shift+right arrow to move to the next object and NVDA+numpad 4 or NVDA+shift+left arrow to move to the previous object.  However, without a better understanding of how it works, you will likely get lost, as they are fairly complex.

You can find more about the Basic Training for NVDA from the official shop: https://www.nvaccess.org/shop/

Kind regards

Quentin.

On Mon, May 6, 2019 at 3:02 PM sazid <skstraders.nlr@...> wrote:
hi Gene,
thanks for your quick reply,  as i am a beginner in learning assestive
technology please tell me what is speech viewer  how to use it and
uses of it?  please tell  me how to use review cursor?

On 5/6/19, Gene <gsasner@...> wrote:
> Are you asking how to use the cursors or how to get them to read something
> in Avast?  If you know how to use them fully and you can't read something in
> Avast, then it is very likely those cursors can't read the things you are
> trying to read with them.  It may be that if you route the JAWS cursor to a
> field you are in and then tab and shift tab, if the field is closing now in
> a short time, that it will remain opened and you can have it spoken in that
> way.  It may be that you can use the speech viewer to see what is said.
>
> Gene
> ----- Original Message -----
>
> From: sazid
> Sent: Sunday, May 05, 2019 11:34 PM
> To: nvda
> Subject: [nvda] how to use review cursor on my windows 7 pc?
>
>
> i am using avast anti virus on my pc as the nvda is not reading the
> text of the message given by avast.  how to read them?  how to enable
> review cursor as well as pc cursor?
>
> thanks and regards,
> sazid
>
>
>
>
>
>





--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


locked Re: how to use review cursor on my windows 7 pc?

Gene
 

I haven't used JAWS for years and others can answer some of your questions better and refer you to resources.  For example, I can tell you about the JAWS cursor but I don't know how much it can be used in Windows 10.  It is far less useful than in earlier versions of Windows.  Then, there is the touch cursor, which you will probably want to know something about.  It wasn't in JAWS when I used it.  I don't know enough about it to explain how to use it  I didn't use speech viewer either.  Others may want to describe these things or they may simply refer you to information.  JAWS has a lot of training material.  If you don't understand the material you may be referred to, you may, of course, ask here for explanations on how to do things or for clarifications. 
 
As far as the JAWS cursor is concerned, you use all the movement commands you use with the regular cursor, control home, top of screen, control end end of screen, movement commands such as left and right arrows do the same thing, move by character, control left and right arrow do the same thing, etc. 
 
You switch to the JAWS cursor with numpad minus, the last key on the top right of the numpad.  To route the JAWS cursor to where you are use Numpad insert and the JAWS cursor key, in other words, hold numpad insert and press the last key at the top right of the numpad while doing so. 
That both moves the JAWS cursor to where you are and turns it on.
to return to the pc cursor, which you usually are in, use the command numpad plus, the long key right below numpad minus.  it’s the long key below the JAWS cursor key, on the far right of the numpad.
There is another long key below that one but it isn't used in what we are discussing.
 
Gene

----- Original Message -----
From: sazid
Sent: Monday, May 06, 2019 12:02 AM
Subject: Re: [nvda] how to use review cursor on my windows 7 pc?

hi Gene,
thanks for your quick reply,  as i am a beginner in learning assestive
technology please tell me what is speech viewer  how to use it and
uses of it?  please tell  me how to use review cursor?

On 5/6/19, Gene <gsasner@...> wrote:
> Are you asking how to use the cursors or how to get them to read something
> in Avast?  If you know how to use them fully and you can't read something in
> Avast, then it is very likely those cursors can't read the things you are
> trying to read with them.  It may be that if you route the JAWS cursor to a
> field you are in and then tab and shift tab, if the field is closing now in
> a short time, that it will remain opened and you can have it spoken in that
> way.  It may be that you can use the speech viewer to see what is said.
>
> Gene
> ----- Original Message -----
>
> From: sazid
> Sent: Sunday, May 05, 2019 11:34 PM
> To: nvda
> Subject: [nvda] how to use review cursor on my windows 7 pc?
>
>
> i am using avast anti virus on my pc as the nvda is not reading the
> text of the message given by avast.  how to read them?  how to enable
> review cursor as well as pc cursor?
>
> thanks and regards,
> sazid
>
>
>
>
>
>



locked Re: how to use review cursor on my windows 7 pc?

sazid
 

hi Gene,
thanks for your quick reply, as i am a beginner in learning assestive
technology please tell me what is speech viewer how to use it and
uses of it? please tell me how to use review cursor?

On 5/6/19, Gene <gsasner@gmail.com> wrote:
Are you asking how to use the cursors or how to get them to read something
in Avast? If you know how to use them fully and you can't read something in
Avast, then it is very likely those cursors can't read the things you are
trying to read with them. It may be that if you route the JAWS cursor to a
field you are in and then tab and shift tab, if the field is closing now in
a short time, that it will remain opened and you can have it spoken in that
way. It may be that you can use the speech viewer to see what is said.

Gene
----- Original Message -----

From: sazid
Sent: Sunday, May 05, 2019 11:34 PM
To: nvda
Subject: [nvda] how to use review cursor on my windows 7 pc?


i am using avast anti virus on my pc as the nvda is not reading the
text of the message given by avast. how to read them? how to enable
review cursor as well as pc cursor?

thanks and regards,
sazid






locked Re: how to use review cursor on my windows 7 pc?

Gene
 

Are you asking how to use the cursors or how to get them to read something in Avast?  If you know how to use them fully and you can't read something in Avast, then it is very likely those cursors can't read the things you are trying to read with them.  It may be that if you route the JAWS cursor to a field you are in and then tab and shift tab, if the field is closing now in a short time, that it will remain opened and you can have it spoken in that way.  It may be that you can use the speech viewer to see what is said. 
 
Gene

----- Original Message -----
From: sazid
Sent: Sunday, May 05, 2019 11:34 PM
To: nvda
Subject: [nvda] how to use review cursor on my windows 7 pc?

i am using avast anti virus on my pc as the nvda is not reading the
text of the message given by avast.  how to read them?  how to enable
review cursor as well as pc cursor?

thanks and regards,
sazid



locked how to use review cursor on my windows 7 pc?

sazid
 

i am using avast anti virus on my pc as the nvda is not reading the
text of the message given by avast. how to read them? how to enable
review cursor as well as pc cursor?

thanks and regards,
sazid


Re: is this document out of date?

Quentin Christensen
 

Hi Troy,

Much of it should still be the same, but there have been changes in the last couple of years.  From memory a one of the biggest was the change to the way the review cursor copying works (NVDA+f9 to start marking, then NVDA+f10 TWICE to select and then copy) - I also took the opportunity when I updated that, to expand the whole review cursor section as well.  In the most recent update, I also changed the references to the NVDA settings to refer to the single settings dialog with categories, rather than the many individual dialogs, which we had up until recently.

Can you still use it?  Absolutely.  You might find that a command has changed here and there, so if something doesn't work exactly as the book says it should then do feel free to check with me (it could be an error in the book, and it might be one I haven't found yet) and I can get you on the right path.

Kind regards

Quentin.

On Mon, May 6, 2019 at 10:36 AM Troy Burnham <troyburnham34@...> wrote:
Hi all,


I have a document titled basic training for NVDA.docx. I can't tell when
it was written but it's in a folder with stuff from 2017, if that's when
it was written is it still applicable for the current version of NVDA?


Thanks.


Troy







--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: Greetings and introduction

Quentin Christensen
 

Dear Jarek,

Welcome!  You will find lots of conversations about NVDA here.  Feel free to also share your questions, comments and advice.

I write the official NVDA training material available from NV Access: https://www.nvaccess.org/shop/

I regularly post here, and every couple of weeks I write up a blog post on what NV Access is up to, called In-Process: https://www.nvaccess.org/category/in-process/

Another way to join in is coming up later this year with the annual "NVDACon", an online conference for all things NVDA.  You can find more information about it here: https://www.nvdacon.org/  and in particular, the organisers are currently gathering feedback on the preferred weekend to run the conference.  You can share your thoughts on that here: https://doodle.com/poll/sd5ubgyrbhibm5bw

Kind regards

Quentin.

On Mon, May 6, 2019 at 6:56 AM Jarek.Krcmar <Jarek.Krcmar@...> wrote:
Hello,

My just logged in to conference Nvda.

My name is Jarek Krcmar from the Czech Republic.

I would like to read a messages about Nvda.

Sincerely:

Jarek






--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


Re: key assignments in NVDA

Quentin Christensen
 

There isn't a single keypress way, but you can use the "input gestures" to change the behaviour of the keystrokes.  What you would need to do is "remove" each one of the conflicting desktop keystrokes.  Ideally if you do it from desktop layout, you could remove then add the same keystroke back but set it for desktop layout only - then go back to laptop keyboard layout once you are done (if you simply remove them, if you ever go to desktop layout, you won't have any object navigation keys).

You can find "Input Gestures" on NVDA's preferences menu (NVDA+n, then P, then select "Input Gestures").

Regards

Quentin.

On Fri, May 3, 2019 at 10:12 PM <mhysnm1964@...> wrote:

All,

 

Is it possible to remap keys in NVDA? As I am using a laptop with a numerical keypad. I am also using the NVDA laptop layout. I want the number pad to be used as normal cursor keys, page up and page down, ETC. But NVDA is overriding this behaviour and forces the use of Object Nav. Any ideas on how to get around this? As the laptop keyboard to jump to home, end, delete is at the top of the keyboard which is quite a pain. FN left/right arrow key does not change to home and end.

 

 

 

I wish NVDA had the option to switch between use of Object Nav (default behaviour) and a normal keypad.



--
Quentin Christensen
Training and Support Manager

Official NVDA Training modules and expert certification now available: http://www.nvaccess.org/shop/

Facebook: http://www.facebook.com/NVAccess 
Twitter: @NVAccess 


is this document out of date?

Troy Burnham
 

Hi all,


I have a document titled basic training for NVDA.docx. I can't tell when it was written but it's in a folder with stuff from 2017, if that's when it was written is it still applicable for the current version of NVDA?


Thanks.


Troy


thanks for fixing outlook

lauracornwell
 

Hey thereto all on this mailing list ,I don’t post much on hear at all , but I would just like to say a big thanks to everyone who has worked on the stuff with outlook, this has   been a big help to me and so many ,more people  keep up[ the great work .everyone .


Re: Python ide

Kerryn Gunness <k_gunness@...>
 

my apologies for posting

----- Original Message -----
From: "Carlos" <gmjc341961@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Sunday, May 5, 2019 9:29 AM
Subject: Re: [nvda] Python ide


Hello:

You should not have posted that link here!

That website is FULL! of pirated and reversed engineered software!!!

"Please!" Don't post links to these kinds of websites!

It's very bad for NVDA mailing list to be associated with these kinds of websites!


On 5/5/2019 6:10 AM, Kerryn Gunness via Groups.Io wrote:
hi felix
below is the direct link to bhp's website

https://blindhelp.net/

this website contains software, training material ETC, used by blind or v i persons, also created by blind or v i persons

its a great resource

you can get notepad ++ here

kerryn
----- Original Message ----- From: "Felix G." <constantlyvariable@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Sunday, May 5, 2019 5:04 AM
Subject: Re: [nvda] Python ide


Hi,
what is bhp? Never heard of it, and the link seems to be invalid.
Best,
Felix

Am Sa., 4. Mai 2019 um 21:30 Uhr schrieb Kerryn Gunness via Groups.Io
<k_gunness=yahoo.ca@groups.io>:

i would recommend a text editor like
notepad ++

check bhp for it
bhp.net


----- Original Message -----
From: Dang Manh Cuong
To: nvda@nvda.groups.io
Sent: Friday, May 3, 2019 10:56 PM
Subject: Re: [nvda] Python ide

Hi
Press ctrl+Shift+P to open the command palate. This prrogram has a web interface so just press E to jump to the edit area, then press spacebar to enter it then write code. Press esc to exit it and down arrow to find the output area.
Cuong
----------------
Dang Manh Cuong
The Assistive technology specialist
Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
Tel: +8428 7302-4488
E-mail: info@saomaicenter.org; tech@saomaicenter.org
Facebook: https://www.facebook.com/saomaicenterfortheblind
Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org
Mobile / Viber / WhatsApp / Zalo: +84 902-572-300
E-mail: dangmanhcuong@gmail.com; cuong@saomaicenter.org
Skype name: dangmanhcuong
facebook: http://facebook.com/dangmanhcuong
Twitter: @ManhCuongTech
NVDA Certified Expert: https://certification.nvaccess.org/

----- Original Message -----
From: farhan israk
To: nvda@nvda.groups.io
Sent: Saturday, May 4, 2019 2:24 AM
Subject: Re: [nvda] Python ide

Thank you? How to open command palate? How to write and run code? How to see output?


On Thu, 2 May 2019, 8:09 am Dang Manh Cuong, <dangmanhcuong@gmail.com> wrote:

Hi
Read this: https://code.visualstudio.com/docs/python/python-tutorial
After that you can press Alt+F1 to open the settings panel, then search for accessibility at the search box, and find and press spacebar to turn on this feature. I'm busy now, and I just did it for once so may be I didn't remember the correct steps to setup. Tell me and the list if you have problem with setting up VS code.
HTH
Cuong.
----------------
Dang Manh Cuong
The Assistive technology specialist
Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
Tel: +8428 7302-4488
E-mail: info@saomaicenter.org; tech@saomaicenter.org
Facebook: https://www.facebook.com/saomaicenterfortheblind
Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org
Mobile / Viber / WhatsApp / Zalo: +84 902-572-300
E-mail: dangmanhcuong@gmail.com; cuong@saomaicenter.org
Skype name: dangmanhcuong
facebook: http://facebook.com/dangmanhcuong
Twitter: @ManhCuongTech
NVDA Certified Expert: https://certification.nvaccess.org/

----- Original Message -----
From: farhan israk
To: nvda@nvda.groups.io
Sent: Thursday, May 2, 2019 1:50 AM
Subject: Re: [nvda] Python ide

Thank you. Could you guide me step by step? I have been trying for three days but couldn't setup visual studio code for python. If it is needed you may send me mail at fahim.net.2014@gmail.com


On Wed, 1 May 2019, 10:02 pm Dang Manh Cuong, <dangmanhcuong@gmail.com> wrote:

Hi
I use Visual studio code. Take a look at https://code.visualstudio.com/
May be, discuss about Python is not allowed here. I suggest you join the Python vis mailling list, a blind community of learnign Python. Take a look at https://www.freelists.org/webpage/pythonvis
Cuong
----------------
Dang Manh Cuong
The Assistive technology specialist
Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
Tel: +8428 7302-4488
E-mail: info@saomaicenter.org; tech@saomaicenter.org
Facebook: https://www.facebook.com/saomaicenterfortheblind
Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org
Mobile / Viber / WhatsApp / Zalo: +84 902-572-300
E-mail: dangmanhcuong@gmail.com; cuong@saomaicenter.org
Skype name: dangmanhcuong
facebook: http://facebook.com/dangmanhcuong
Twitter: @ManhCuongTech
NVDA Certified Expert: https://certification.nvaccess.org/

----- Original Message -----
From: farhan israk
To: nvda@nvda.groups.io
Sent: Wednesday, May 1, 2019 7:04 PM
Subject: [nvda] Python ide

Which python ide is most accessible and how to setup it?



--
Windows 10 Home, 64-Bit, Version 1809, Build 17763
NVDA Version 2019.1.1



Re: What is the threshold snap shot used for?

hurrikennyandopo ...
 

Hi


Ok that makes sense I heard there was chatter we are changing over before long to use it and things like add ons etc will need to be updated as well to work with it.

is it that we are starting to change from the next release of NVDA?


I would also have to go back and check on the same page it said there was a beta release of NVDA last week. yet when you download it it mentions nvda 2019.1 and not nvda 2019.2 as you would expect in a beta release. I would have to go back and check also it referenced what was new in 2019.1 and not in 2019.2 coming up.

It is for may 2nd 2019 maybe the wrong snap shot went up there?


Gene nz


On 6/05/2019 7:54 AM, Adriani Botez wrote:

This will be for python 3 branch.

 

Von: nvda@nvda.groups.io <nvda@nvda.groups.io> Im Auftrag von hurrikennyandopo ...
Gesendet: Sonntag, 5. Mai 2019 21:54
An: nvda@nvda.groups.io
Betreff: [nvda] What is the threshold snap shot used for?

 

Hi guys

 

I was just looking up on the snap shots page to see if the beta was released of NVDA which it is, but noticed the above in the subject line above the aalpha snap shot. I know what the other 2 do but what does this one do that might be different? to the others?

 

There is no information to say what it does like the others.

 

The link to the page is https://www.nvaccess.org/files/nvda/snapshots/

 

Gene nz

 

--

Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net
 
Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which location (or locations) are nearest to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa).
To find out which software is installed on the APNK network please visit the following link http://www.aotearoapeoplesnetwork.info/faq/software To find out how to use NVDA on APNK computers please visit the following link http://www.aotearoapeoplesnetwork.info/faq/nvda
 

To find out which software is available on the Christchurch City Library network, and how to start the NVDA screen reader, please go to the following links. Software available  https://my.christchurchcitylibraries.com/faq/computers/#faq_5884  How to start the NVDA screen reader on Christchurch City Library computers  https://my.christchurchcitylibraries.com/faqs/what-screen-reader-software-is-available/
 
To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.


--
Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net
 
Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which location (or locations) are nearest to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa).
To find out which software is installed on the APNK network please visit the following link http://www.aotearoapeoplesnetwork.info/faq/software To find out how to use NVDA on APNK computers please visit the following link http://www.aotearoapeoplesnetwork.info/faq/nvda
 

To find out which software is available on the Christchurch City Library network, and how to start the NVDA screen reader, please go to the following links. Software available  https://my.christchurchcitylibraries.com/faq/computers/#faq_5884  How to start the NVDA screen reader on Christchurch City Library computers  https://my.christchurchcitylibraries.com/faqs/what-screen-reader-software-is-available/
 
To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.


Greetings and introduction

Jarek.Krcmar
 

Hello,

My just logged in to conference Nvda.

My name is Jarek Krcmar from the Czech Republic.

I would like to read a messages about Nvda.

Sincerely:

Jarek


Re: What is the threshold snap shot used for?

Adriani Botez
 

This will be for python 3 branch.

 

Von: nvda@nvda.groups.io <nvda@nvda.groups.io> Im Auftrag von hurrikennyandopo ...
Gesendet: Sonntag, 5. Mai 2019 21:54
An: nvda@nvda.groups.io
Betreff: [nvda] What is the threshold snap shot used for?

 

Hi guys

 

I was just looking up on the snap shots page to see if the beta was released of NVDA which it is, but noticed the above in the subject line above the aalpha snap shot. I know what the other 2 do but what does this one do that might be different? to the others?

 

There is no information to say what it does like the others.

 

The link to the page is https://www.nvaccess.org/files/nvda/snapshots/

 

Gene nz

 

--

Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net
 
Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which location (or locations) are nearest to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa).
To find out which software is installed on the APNK network please visit the following link http://www.aotearoapeoplesnetwork.info/faq/software To find out how to use NVDA on APNK computers please visit the following link http://www.aotearoapeoplesnetwork.info/faq/nvda
 

To find out which software is available on the Christchurch City Library network, and how to start the NVDA screen reader, please go to the following links. Software available  https://my.christchurchcitylibraries.com/faq/computers/#faq_5884  How to start the NVDA screen reader on Christchurch City Library computers  https://my.christchurchcitylibraries.com/faqs/what-screen-reader-software-is-available/
 
To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.



What is the threshold snap shot used for?

hurrikennyandopo ...
 

Hi guys


I was just looking up on the snap shots page to see if the beta was released of NVDA which it is, but noticed the above in the subject line above the aalpha snap shot. I know what the other 2 do but what does this one do that might be different? to the others?


There is no information to say what it does like the others.


The link to the page is https://www.nvaccess.org/files/nvda/snapshots/


Gene nz


--
Check out my website for NVDA tutorials and other blindness related material at http://www.accessibilitycentral.net
 
Regardless of where you are in New Zealand if you are near one of the APNK sites you can use a copy of the NVDA screen reader on one of their computers. To find out which location (or locations) are nearest to you please visit http://www.aotearoapeoplesnetwork.org/content/partner-libraries (Aotearoa People's Network Kaharoa).
To find out which software is installed on the APNK network please visit the following link http://www.aotearoapeoplesnetwork.info/faq/software To find out how to use NVDA on APNK computers please visit the following link http://www.aotearoapeoplesnetwork.info/faq/nvda
 

To find out which software is available on the Christchurch City Library network, and how to start the NVDA screen reader, please go to the following links. Software available  https://my.christchurchcitylibraries.com/faq/computers/#faq_5884  How to start the NVDA screen reader on Christchurch City Library computers  https://my.christchurchcitylibraries.com/faqs/what-screen-reader-software-is-available/
 
To find an NVDA certified expert near you, please visit the following link https://certification.nvaccess.org/. The certification page contains the official list of NVDA certified individuals from around the world, who have sat and successfully passed the NVDA expert exam.


Re: changing what NVDA says when a punctuation mark is typed

Troy Burnham
 

I managed to get tick changed to apostrophe, I forgot about the other times I might want to hear dot instead of period so I've decided to leave that as is for now.


Troy

On 5/5/2019 4:11 AM, Brian's Mail list account via Groups.Io wrote:
What would be really good would be a short routine that means people could share customised versions. Obviously theirs would depend on localisation. I've successfully done it manually on my own machines but an error and all sorts of oddities can occur when you reboot nvda. Ahem.
Brian

bglists@blueyonder.co.uk
Sent via blueyonder.
Please address personal E-mail to:-
briang1@blueyonder.co.uk, putting 'Brian Gaff'
in the display name field.
----- Original Message ----- From: "Andre Fisher" <andrefisher729@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Saturday, May 04, 2019 11:15 PM
Subject: Re: [nvda] changing what NVDA says when a punctuation mark is typed


Hi.

In the symbols pronunciation dialog, there are two entries for both these symbols, as there are two cases where both are usually used. The long and short of it is, you'd need to change them both, but I'm not sure if this may have undesired results. Change them and let us know.






cannot remove speaking of row headings in excel

Cearbhall O'Meadhra
 

Quentin,

I have pressed NVDA + control + r to set a particular column as the row headings for each row in my excel spread sheet. Each row is separated by a blank row but yet NVDA set all of the cells in that column as the heading for their respective row. This was fine when I needed to hear what row I was on.
Now, I wish to turn off speaking of the rows and find that NVDA will only allow me to turn off speaking the cells one at a time. There are 5,650 rows involved! I don't think I should have to do each cell in turn, should I?

How can I now get rid of the spoken row headings for the entire column?


All the best,

Cearbhall

m +353 (0)833323487 Ph: _353 (0)1-2864623 e: cearbhall.omeadhra@blbc.ie

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Kerryn Gunness via Groups.Io
Sent: Sunday, May 5, 2019 2:10 PM
To: nvda@nvda.groups.io
Subject: Re: [nvda] Python ide

hi felix
below is the direct link to bhp's website

https://blindhelp.net/

this website contains software, training material ETC, used by blind or v i persons, also created by blind or v i persons

its a great resource

you can get notepad ++ here

kerryn
----- Original Message -----
From: "Felix G." <constantlyvariable@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Sunday, May 5, 2019 5:04 AM
Subject: Re: [nvda] Python ide


Hi,
what is bhp? Never heard of it, and the link seems to be invalid.
Best,
Felix

Am Sa., 4. Mai 2019 um 21:30 Uhr schrieb Kerryn Gunness via Groups.Io
<k_gunness=yahoo.ca@groups.io>:

i would recommend a text editor like
notepad ++

check bhp for it
bhp.net


----- Original Message -----
From: Dang Manh Cuong
To: nvda@nvda.groups.io
Sent: Friday, May 3, 2019 10:56 PM
Subject: Re: [nvda] Python ide

Hi
Press ctrl+Shift+P to open the command palate. This prrogram has a web
interface so just press E to jump to the edit area, then press spacebar to
enter it then write code. Press esc to exit it and down arrow to find the
output area.
Cuong
----------------
Dang Manh Cuong
The Assistive technology specialist
Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
Tel: +8428 7302-4488
E-mail: info@saomaicenter.org; tech@saomaicenter.org
Facebook: https://www.facebook.com/saomaicenterfortheblind
Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org
Mobile / Viber / WhatsApp / Zalo: +84 902-572-300
E-mail: dangmanhcuong@gmail.com; cuong@saomaicenter.org
Skype name: dangmanhcuong
facebook: http://facebook.com/dangmanhcuong
Twitter: @ManhCuongTech
NVDA Certified Expert: https://certification.nvaccess.org/

----- Original Message -----
From: farhan israk
To: nvda@nvda.groups.io
Sent: Saturday, May 4, 2019 2:24 AM
Subject: Re: [nvda] Python ide

Thank you? How to open command palate? How to write and run code? How to
see output?


On Thu, 2 May 2019, 8:09 am Dang Manh Cuong, <dangmanhcuong@gmail.com>
wrote:

Hi
Read this: https://code.visualstudio.com/docs/python/python-tutorial
After that you can press Alt+F1 to open the settings panel, then search
for accessibility at the search box, and find and press spacebar to turn
on this feature. I'm busy now, and I just did it for once so may be I
didn't remember the correct steps to setup. Tell me and the list if you
have problem with setting up VS code.
HTH
Cuong.
----------------
Dang Manh Cuong
The Assistive technology specialist
Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
Tel: +8428 7302-4488
E-mail: info@saomaicenter.org; tech@saomaicenter.org
Facebook: https://www.facebook.com/saomaicenterfortheblind
Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org
Mobile / Viber / WhatsApp / Zalo: +84 902-572-300
E-mail: dangmanhcuong@gmail.com; cuong@saomaicenter.org
Skype name: dangmanhcuong
facebook: http://facebook.com/dangmanhcuong
Twitter: @ManhCuongTech
NVDA Certified Expert: https://certification.nvaccess.org/

----- Original Message -----
From: farhan israk
To: nvda@nvda.groups.io
Sent: Thursday, May 2, 2019 1:50 AM
Subject: Re: [nvda] Python ide

Thank you. Could you guide me step by step? I have been trying for three
days but couldn't setup visual studio code for python. If it is needed
you may send me mail at fahim.net.2014@gmail.com


On Wed, 1 May 2019, 10:02 pm Dang Manh Cuong, <dangmanhcuong@gmail.com>
wrote:

Hi
I use Visual studio code. Take a look at https://code.visualstudio.com/
May be, discuss about Python is not allowed here. I suggest you join the
Python vis mailling list, a blind community of learnign Python. Take a
look at https://www.freelists.org/webpage/pythonvis
Cuong
----------------
Dang Manh Cuong
The Assistive technology specialist
Sao Mai Vocational and assistive center for the blind
52/22 Huynh Thien Loc St., Hoa Thanh ward, Tan Phu dist., HCM, Vietnam.
Tel: +8428 7302-4488
E-mail: info@saomaicenter.org; tech@saomaicenter.org
Facebook: https://www.facebook.com/saomaicenterfortheblind
Website: http://www.trungtamsaomai.org; http://www.saomaicenter.org
Mobile / Viber / WhatsApp / Zalo: +84 902-572-300
E-mail: dangmanhcuong@gmail.com; cuong@saomaicenter.org
Skype name: dangmanhcuong
facebook: http://facebook.com/dangmanhcuong
Twitter: @ManhCuongTech
NVDA Certified Expert: https://certification.nvaccess.org/

----- Original Message -----
From: farhan israk
To: nvda@nvda.groups.io
Sent: Wednesday, May 1, 2019 7:04 PM
Subject: [nvda] Python ide

Which python ide is most accessible and how to setup it?