Date   

Re: NVDA and APA Style

zvonimir stanečić, 9a5dsz
 

Hi!

The only way to deal with this situation is to use the braille display.

I am using the Chicago citation style, which is in my humble opinion more accessible to screen readers.

Best,

Zvonimir

 

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Kelly, Kathleen
Sent: Thursday, May 13, 2021 5:38 AM
To: nvda@nvda.groups.io
Subject: [nvda] NVDA and APA Style

 

GS seeks feedback on NVDA and APA Style, the writing/format citation style used in academic papers. I have turned on all the punctuation functions to get NVDA to read the parentheses, periods, and italics, etc. but it is creating an auditory overload. Ideas? Thanks. 


Re: NVDA and Edge Chromium

Bobby
 

Well try to find a copy of Microsoft edge at www.filehorse.com. Or try resetting your windows 10 or you can format the hard drive Butt I would try to get a copy of edge before trying any of these ideas to fix edge.  Try Microsoft's web site as well as filehorse.  Good luck

On 5/12/2021 11:50 PM, Chris Shook wrote:
Hi Fernando,
Thanks for the suggestion. I tried it, but it's a no go. It didn't fox it. Incidentally, it also effects the downloads folder, So I guess I'll have to switch to GoogleChrome for now.




Re: NVDA and Edge Chromium

Chris Shook
 

Hi Fernando,
Thanks for the suggestion. I tried it, but it's a no go. It didn't fox it. Incidentally, it also effects the downloads folder, So I guess I'll have to switch to GoogleChrome for now.


NVDA and APA Style

Kelly, Kathleen
 

GS seeks feedback on NVDA and APA Style, the writing/format citation style used in academic papers. I have turned on all the punctuation functions to get NVDA to read the parentheses, periods, and italics, etc. but it is creating an auditory overload. Ideas? Thanks. 


Re: NVDA and Edge Chromium

Ben J. Bloomgren
 

Thank you, Fernando, I'll try that out. I had liked Edge before the update.

Ben

On May 12, 2021, at 17:47, Fernando Apan <ferapan@utexas.edu> wrote:

Hi there.
I had the same problem back a few days ago and I tryed repairing Microsoft edge from the control panel. That fixed the issue and now I'm able to open the favorites just as I did before that update. Hope that helps. If you have any question just email me.
Stay well.
Fernando Apan.

Enviado desde mi iPhone

El 12 may 2021, a las 12:51, Chris Shook <chris0309@sero.email> escribió:

Hi,
I recently updated my computer and after the Update, I'm having difficulty accessing the favorites menu. I can open the menu, but I can't seem to navigate it. It calls it a dialogue, but it's like it locks up.
Is anyone having that issue? If so, do you know of a work around?








Re: NVDA and Edge Chromium

Fernando Apan
 

Hi there.
I had the same problem back a few days ago and I tryed repairing Microsoft edge from the control panel. That fixed the issue and now I'm able to open the favorites just as I did before that update. Hope that helps. If you have any question just email me.
Stay well.
Fernando Apan.

Enviado desde mi iPhone

El 12 may 2021, a las 12:51, Chris Shook <chris0309@sero.email> escribió:

Hi,
I recently updated my computer and after the Update, I'm having difficulty accessing the favorites menu. I can open the menu, but I can't seem to navigate it. It calls it a dialogue, but it's like it locks up.
Is anyone having that issue? If so, do you know of a work around?





Re: Problem with Onecore voices on a Windows 10 laptop

Louise Pfau
 

There are SAPI 5 versions of some of the voices that are also listed as OneCore.  In a recent thread, I learned that which voices also appear as SAPI 5 depends on which default language settings you have.  If I remember correctly, the problem I had with OneCore voices was that it didn’t appear correctly in the list of synthesizers although it loaded correctly when I was finally able to select it.  Compatibility with earlier versions of Windows had to be turned off from NVDA properties.  This was a while ago.
 
Louise


Re: teamtalk latest issues

 

Thats good.

I managed to resolve the issue by starting teamtalk, setting the sound to none, hitting ok, restarting nvda, opening another instance.

doing the same thing, restarting nvda, tabbing to the other instance which simply was no longer frozen, kill the stuck instance, try to do things again but this time it worked properly and I can't seem to reproduce it anymore.

It doesn't matter anyway as long as the config gets mangled somehow as its set for what I need it for right now.

It will be good to get this fixed though.


On 13/05/2021 6:12 am, Corentin BACQUÉ-CAZENAVE via groups.io wrote:

Hi to everyone,

on GitHub we have found just now a way to reproduce issue describe in this topic.

Now main TeamTalk developer and me will try to find a solution to fix it.

Corentin (certifié Expert NVDA 2019) :
Logo de certification et contacts ici

Le 12/05/2021 à 20:09, Shaun Everiss a écrit :
Maybe you should report that.

I don't use teamtalk public servers though because my main use was for spaciffic servers I manually entered into site manager.

The biggest reason to get the later versions are usually codec and security updates.



On 13/05/2021 12:17 am, Robert Doc Wright godfearer wrote:
I had to leave 5.7 because when I clicked on a particular server it completely kicked me out of Team Talk. When I downgraded to 5.6,.3 the problem was resolved.
----- Original Message ----- From: "Shaun Everiss" <sm.everiss@...>
To: <nvda@nvda.groups.io>
Sent: Wednesday, May 12, 2021 3:01 AM
Subject: [nvda] teamtalk latest issues


Hi all.

currently teamtalk 5.7.1 latest beta and stable build has an issue refferenced here.

https://github.com/BearWare/TeamTalk5/issues/869

A few people including myself have had an issue with the latest version.

It appears at least in preffs that saving preffs after changing sound devices which are always using default device or internal devices for whatever reason simply will not work.

Users do say it will hang for a long time and will possibly not come back.

For now I'd go back to the previous version of 5.6 if you really need the program to save settings.

The issue sadly does take nvda out forcing me to restart.

This is not in itself an issue as even if nvda did not freez I still wouldn't be able to use the program.

The log fragment etc is refferenced in the issue though I do want to get a teamtalk log if I can find out how to generate it.

I don't need teamtalk for the moment but just a heads up, if you want the latest classic there is a showstopping bug right now.

Basically what it boils down to is you can't save configuration at all!




















Re: teamtalk latest issues

Corentin BACQUÉ-CAZENAVE
 

Hi to everyone,

on GitHub we have found just now a way to reproduce issue describe in this topic.

Now main TeamTalk developer and me will try to find a solution to fix it.

Corentin (certifié Expert NVDA 2019) :
Logo de certification et contacts ici

Le 12/05/2021 à 20:09, Shaun Everiss a écrit :

Maybe you should report that.

I don't use teamtalk public servers though because my main use was for spaciffic servers I manually entered into site manager.

The biggest reason to get the later versions are usually codec and security updates.



On 13/05/2021 12:17 am, Robert Doc Wright godfearer wrote:
I had to leave 5.7 because when I clicked on a particular server it completely kicked me out of Team Talk. When I downgraded to 5.6,.3 the problem was resolved.
----- Original Message ----- From: "Shaun Everiss" <sm.everiss@...>
To: <nvda@nvda.groups.io>
Sent: Wednesday, May 12, 2021 3:01 AM
Subject: [nvda] teamtalk latest issues


Hi all.

currently teamtalk 5.7.1 latest beta and stable build has an issue refferenced here.

https://github.com/BearWare/TeamTalk5/issues/869

A few people including myself have had an issue with the latest version.

It appears at least in preffs that saving preffs after changing sound devices which are always using default device or internal devices for whatever reason simply will not work.

Users do say it will hang for a long time and will possibly not come back.

For now I'd go back to the previous version of 5.6 if you really need the program to save settings.

The issue sadly does take nvda out forcing me to restart.

This is not in itself an issue as even if nvda did not freez I still wouldn't be able to use the program.

The log fragment etc is refferenced in the issue though I do want to get a teamtalk log if I can find out how to generate it.

I don't need teamtalk for the moment but just a heads up, if you want the latest classic there is a showstopping bug right now.

Basically what it boils down to is you can't save configuration at all!




















Re: teamtalk latest issues

 

Maybe you should report that.

I don't use teamtalk public servers though because my main use was for spaciffic servers I manually entered into site manager.

The biggest reason to get the later versions are usually codec and security updates.

On 13/05/2021 12:17 am, Robert Doc Wright godfearer wrote:
I had to leave 5.7 because when I clicked on a particular server it completely kicked me out of Team Talk. When I downgraded to 5.6,.3 the problem was resolved.
----- Original Message ----- From: "Shaun Everiss" <sm.everiss@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Wednesday, May 12, 2021 3:01 AM
Subject: [nvda] teamtalk latest issues


Hi all.

currently teamtalk 5.7.1 latest beta and stable build has an issue refferenced here.

https://github.com/BearWare/TeamTalk5/issues/869

A few people including myself have had an issue with the latest version.

It appears at least in preffs that saving preffs after changing sound devices which are always using default device or internal devices for whatever reason simply will not work.

Users do say it will hang for a long time and will possibly not come back.

For now I'd go back to the previous version of 5.6 if you really need the program to save settings.

The issue sadly does take nvda out forcing me to restart.

This is not in itself an issue as even if nvda did not freez I still wouldn't be able to use the program.

The log fragment etc is refferenced in the issue though I do want to get a teamtalk log if I can find out how to generate it.

I don't need teamtalk for the moment but just a heads up, if you want the latest classic there is a showstopping bug right now.

Basically what it boils down to is you can't save configuration at all!











NVDA and Edge Chromium

Chris Shook
 

Hi,
I recently updated my computer and after the Update, I'm having difficulty accessing the favorites menu. I can open the menu, but I can't seem to navigate it. It calls it a dialogue, but it's like it locks up.
Is anyone having that issue? If so, do you know of a work around?


Re: Problem with Onecore voices on a Windows 10 laptop

Chris
 

You could try removing the voices and adding them again

 

And RESTART the system

 

From: Steve Nutt
Sent: 12 May 2021 17:07
To: nvda@nvda.groups.io
Subject: [nvda] Problem with Onecore voices on a Windows 10 laptop

 

Hi,

 

This is a brand new laptop for a customer.  I have just upgraded it to Windows 10 H2 and installed NVDA.

 

I have two identical laptops here, one works absolutely fine, and the other will not load the Onecore voices.

 

It appears in the list, but then says Error loading Synthesiser driver. It works with Espeak fine, but I think they would prefer the default voice.

 

Narrator speaks fine with it, and even works if I go into Speech settings in Windows and Preview the voice.

 

What I have tried so far is to completely remove and reinstall NVDA, including user settings.

 

I have also tried resetting the configuration with Control+NVDA+R three times.

 

Again, the synth appears in the list, but errors when loading.

 

I saw a similar message on this list from Louise, so the next thing I am going to try is to check compatibility settings in NVDA to make sure nothing is checked.  Other than that though, I am not sure what is going on here. Other than that, I’m almost ready to reset the PC, if no-one has any ideas.

 

Here is the log excerpt that I get when trying to load the synth:-

 

INFO - core.main (16:48:49.235) - MainThread (5932):

Using configobj version 5.1.0 with validate version 1.0.1

ERROR - synthDriverHandler.setSynth (16:48:52.220) - MainThread (5932):

setSynth

Traceback (most recent call last):

  File "synthDriverHandler.pyc", line 448, in setSynth

  File "synthDriverHandler.pyc", line 419, in getSynthInstance

  File "synthDrivers\oneCore.pyc", line 169, in __init__

  File "synthDrivers\oneCore.pyc", line 476, in _getDefaultVoice

RuntimeError: No voices available

 

Of course, there are voices available, because they work with Narrator.

 

If anyone has any ideas, please do hit me with them.

 

Thanks.

 

All the best


Steve--

To subscribe to our News and Special Offers list, go to https://www.comproom.co.uk/subscribe

 

Computer Room Services

77 Exeter Close

Stevenage

Hertfordshire

SG1 4PW

T: +44(0)1438-742286

M: +44(0)7956-334938

F: +44(0)1438-759589

E: steve@...

W: https://www.comproom.co.uk

 

 


Re: Problem with Onecore voices on a Windows 10 laptop

Steve Nutt
 

Yep, you asked Louise that, and I even answered it in this Email, by saying I went into speech settings, selected the voice and previewed it.

All the best

Steve

--
To subscribe to our News and Special Offers list, go to https://www.comproom.co.uk/subscribe

Computer Room Services
77 Exeter Close
Stevenage
Hertfordshire
SG1 4PW
T: +44(0)1438-742286
M: +44(0)7956-334938
F: +44(0)1438-759589
E: steve@comproom.co.uk
W: https://www.comproom.co.uk

-----Original Message-----
From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Jackie
Sent: 12 May 2021 17:18
To: nvda@nvda.groups.io
Subject: Re: [nvda] Problem with Onecore voices on a Windows 10 laptop

Steve, are you sure the voices that are working w/Narrator are 1core as opposed to SAPI5?

On 5/12/21, Steve Nutt <steve@comproom.co.uk> wrote:
Hi,



This is a brand new laptop for a customer. I have just upgraded it to
Windows 10 H2 and installed NVDA.



I have two identical laptops here, one works absolutely fine, and the
other will not load the Onecore voices.



It appears in the list, but then says Error loading Synthesiser
driver. It works with Espeak fine, but I think they would prefer the default voice.



Narrator speaks fine with it, and even works if I go into Speech
settings in Windows and Preview the voice.



What I have tried so far is to completely remove and reinstall NVDA,
including user settings.



I have also tried resetting the configuration with Control+NVDA+R
three times.



Again, the synth appears in the list, but errors when loading.



I saw a similar message on this list from Louise, so the next thing I
am going to try is to check compatibility settings in NVDA to make
sure nothing is checked. Other than that though, I am not sure what
is going on here.
Other than that, I'm almost ready to reset the PC, if no-one has any ideas.



Here is the log excerpt that I get when trying to load the synth:-



INFO - core.main (16:48:49.235) - MainThread (5932):

Using configobj version 5.1.0 with validate version 1.0.1

ERROR - synthDriverHandler.setSynth (16:48:52.220) - MainThread (5932):

setSynth

Traceback (most recent call last):

File "synthDriverHandler.pyc", line 448, in setSynth

File "synthDriverHandler.pyc", line 419, in getSynthInstance

File "synthDrivers\oneCore.pyc", line 169, in __init__

File "synthDrivers\oneCore.pyc", line 476, in _getDefaultVoice

RuntimeError: No voices available



Of course, there are voices available, because they work with Narrator.



If anyone has any ideas, please do hit me with them.



Thanks.



All the best


Steve--

To subscribe to our News and Special Offers list, go to
<https://www.comproom.co.uk/subscribe>
https://www.comproom.co.uk/subscribe



Computer Room Services

77 Exeter Close

Stevenage

Hertfordshire

SG1 4PW

T: +44(0)1438-742286

M: +44(0)7956-334938

F: +44(0)1438-759589

E: <mailto:steve@comproom.co.uk> steve@comproom.co.uk

W: <https://www.comproom.co.uk> https://www.comproom.co.uk









--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@freelists.org with 'subscribe' in the Subject field OR by visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com


Re: Problem with Onecore voices on a Windows 10 laptop

Steve Nutt
 

Problem solved, I ended up resetting the machine.

 

I couldn’t really wait long, as it’s for a customer.

 

Weird though.

 

Thanks.

 

All the best


Steve

 

--

To subscribe to our News and Special Offers list, go to https://www.comproom.co.uk/subscribe

 

Computer Room Services

77 Exeter Close

Stevenage

Hertfordshire

SG1 4PW

T: +44(0)1438-742286

M: +44(0)7956-334938

F: +44(0)1438-759589

E: steve@...

W: https://www.comproom.co.uk

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Steve Nutt
Sent: 12 May 2021 17:07
To: nvda@nvda.groups.io
Subject: [nvda] Problem with Onecore voices on a Windows 10 laptop

 

Hi,

 

This is a brand new laptop for a customer.  I have just upgraded it to Windows 10 H2 and installed NVDA.

 

I have two identical laptops here, one works absolutely fine, and the other will not load the Onecore voices.

 

It appears in the list, but then says Error loading Synthesiser driver. It works with Espeak fine, but I think they would prefer the default voice.

 

Narrator speaks fine with it, and even works if I go into Speech settings in Windows and Preview the voice.

 

What I have tried so far is to completely remove and reinstall NVDA, including user settings.

 

I have also tried resetting the configuration with Control+NVDA+R three times.

 

Again, the synth appears in the list, but errors when loading.

 

I saw a similar message on this list from Louise, so the next thing I am going to try is to check compatibility settings in NVDA to make sure nothing is checked.  Other than that though, I am not sure what is going on here. Other than that, I’m almost ready to reset the PC, if no-one has any ideas.

 

Here is the log excerpt that I get when trying to load the synth:-

 

INFO - core.main (16:48:49.235) - MainThread (5932):

Using configobj version 5.1.0 with validate version 1.0.1

ERROR - synthDriverHandler.setSynth (16:48:52.220) - MainThread (5932):

setSynth

Traceback (most recent call last):

  File "synthDriverHandler.pyc", line 448, in setSynth

  File "synthDriverHandler.pyc", line 419, in getSynthInstance

  File "synthDrivers\oneCore.pyc", line 169, in __init__

  File "synthDrivers\oneCore.pyc", line 476, in _getDefaultVoice

RuntimeError: No voices available

 

Of course, there are voices available, because they work with Narrator.

 

If anyone has any ideas, please do hit me with them.

 

Thanks.

 

All the best


Steve--

To subscribe to our News and Special Offers list, go to https://www.comproom.co.uk/subscribe

 

Computer Room Services

77 Exeter Close

Stevenage

Hertfordshire

SG1 4PW

T: +44(0)1438-742286

M: +44(0)7956-334938

F: +44(0)1438-759589

E: steve@...

W: https://www.comproom.co.uk

 


Re: Problem with Onecore voices on a Windows 10 laptop

Jackie
 

Steve, are you sure the voices that are working w/Narrator are 1core
as opposed to SAPI5?

On 5/12/21, Steve Nutt <steve@comproom.co.uk> wrote:
Hi,



This is a brand new laptop for a customer. I have just upgraded it to
Windows 10 H2 and installed NVDA.



I have two identical laptops here, one works absolutely fine, and the other
will not load the Onecore voices.



It appears in the list, but then says Error loading Synthesiser driver. It
works with Espeak fine, but I think they would prefer the default voice.



Narrator speaks fine with it, and even works if I go into Speech settings
in
Windows and Preview the voice.



What I have tried so far is to completely remove and reinstall NVDA,
including user settings.



I have also tried resetting the configuration with Control+NVDA+R three
times.



Again, the synth appears in the list, but errors when loading.



I saw a similar message on this list from Louise, so the next thing I am
going to try is to check compatibility settings in NVDA to make sure
nothing
is checked. Other than that though, I am not sure what is going on here.
Other than that, I'm almost ready to reset the PC, if no-one has any ideas.



Here is the log excerpt that I get when trying to load the synth:-



INFO - core.main (16:48:49.235) - MainThread (5932):

Using configobj version 5.1.0 with validate version 1.0.1

ERROR - synthDriverHandler.setSynth (16:48:52.220) - MainThread (5932):

setSynth

Traceback (most recent call last):

File "synthDriverHandler.pyc", line 448, in setSynth

File "synthDriverHandler.pyc", line 419, in getSynthInstance

File "synthDrivers\oneCore.pyc", line 169, in __init__

File "synthDrivers\oneCore.pyc", line 476, in _getDefaultVoice

RuntimeError: No voices available



Of course, there are voices available, because they work with Narrator.



If anyone has any ideas, please do hit me with them.



Thanks.



All the best


Steve--

To subscribe to our News and Special Offers list, go to
<https://www.comproom.co.uk/subscribe> https://www.comproom.co.uk/subscribe



Computer Room Services

77 Exeter Close

Stevenage

Hertfordshire

SG1 4PW

T: +44(0)1438-742286

M: +44(0)7956-334938

F: +44(0)1438-759589

E: <mailto:steve@comproom.co.uk> steve@comproom.co.uk

W: <https://www.comproom.co.uk> https://www.comproom.co.uk








--
Subscribe to a WordPress for Newbies Mailing List by sending a message to:
wp4newbs-request@freelists.org with 'subscribe' in the Subject field OR by
visiting the list page at http://www.freelists.org/list/wp4newbs
& check out my sites at www.brightstarsweb.com & www.mysitesbeenhacked.com


Problem with Onecore voices on a Windows 10 laptop

Steve Nutt
 

Hi,

 

This is a brand new laptop for a customer.  I have just upgraded it to Windows 10 H2 and installed NVDA.

 

I have two identical laptops here, one works absolutely fine, and the other will not load the Onecore voices.

 

It appears in the list, but then says Error loading Synthesiser driver. It works with Espeak fine, but I think they would prefer the default voice.

 

Narrator speaks fine with it, and even works if I go into Speech settings in Windows and Preview the voice.

 

What I have tried so far is to completely remove and reinstall NVDA, including user settings.

 

I have also tried resetting the configuration with Control+NVDA+R three times.

 

Again, the synth appears in the list, but errors when loading.

 

I saw a similar message on this list from Louise, so the next thing I am going to try is to check compatibility settings in NVDA to make sure nothing is checked.  Other than that though, I am not sure what is going on here. Other than that, I’m almost ready to reset the PC, if no-one has any ideas.

 

Here is the log excerpt that I get when trying to load the synth:-

 

INFO - core.main (16:48:49.235) - MainThread (5932):

Using configobj version 5.1.0 with validate version 1.0.1

ERROR - synthDriverHandler.setSynth (16:48:52.220) - MainThread (5932):

setSynth

Traceback (most recent call last):

  File "synthDriverHandler.pyc", line 448, in setSynth

  File "synthDriverHandler.pyc", line 419, in getSynthInstance

  File "synthDrivers\oneCore.pyc", line 169, in __init__

  File "synthDrivers\oneCore.pyc", line 476, in _getDefaultVoice

RuntimeError: No voices available

 

Of course, there are voices available, because they work with Narrator.

 

If anyone has any ideas, please do hit me with them.

 

Thanks.

 

All the best


Steve--

To subscribe to our News and Special Offers list, go to https://www.comproom.co.uk/subscribe

 

Computer Room Services

77 Exeter Close

Stevenage

Hertfordshire

SG1 4PW

T: +44(0)1438-742286

M: +44(0)7956-334938

F: +44(0)1438-759589

E: steve@...

W: https://www.comproom.co.uk

 


Copying and pasting problem in games written in BGT

mustafa elçiçek
 

Hello,

While the NVDA Extension Global plugin enabled, I cannot copy and paste in games written with BGT. I mean, I want to paste the clipboard text into a message window, I press CTRL +V but it won't paste in any way.

However, if I press Alt + CTRL + V, then I can paste that way. From the plugin's settings, I set all features as loaded, but again, nothing has changed. Of course, I leave the announcements feature of the Clipboard commands loaded. When I set the announcement feature of clipboard commands to "Don't install", there is no problem. So copy and paste process works as expected.

What do you think the problem might be caused by?


Re: teamtalk latest issues

Robert Doc Wright godfearer
 

I had to leave 5.7 because when I clicked on a particular server it completely kicked me out of Team Talk. When I downgraded to 5.6,.3 the problem was resolved.

----- Original Message -----
From: "Shaun Everiss" <sm.everiss@gmail.com>
To: <nvda@nvda.groups.io>
Sent: Wednesday, May 12, 2021 3:01 AM
Subject: [nvda] teamtalk latest issues


Hi all.

currently teamtalk 5.7.1 latest beta and stable build has an issue refferenced here.

https://github.com/BearWare/TeamTalk5/issues/869

A few people including myself have had an issue with the latest version.

It appears at least in preffs that saving preffs after changing sound devices which are always using default device or internal devices for whatever reason simply will not work.

Users do say it will hang for a long time and will possibly not come back.

For now I'd go back to the previous version of 5.6 if you really need the program to save settings.

The issue sadly does take nvda out forcing me to restart.

This is not in itself an issue as even if nvda did not freez I still wouldn't be able to use the program.

The log fragment etc is refferenced in the issue though I do want to get a teamtalk log if I can find out how to generate it.

I don't need teamtalk for the moment but just a heads up, if you want the latest classic there is a showstopping bug right now.

Basically what it boils down to is you can't save configuration at all!







Re: navigating headings

Steve Nutt
 

Yep, just type the number 3.

 

All the best


Steve

 

--

To subscribe to our News and Special Offers list, go to https://www.comproom.co.uk/subscribe

 

Computer Room Services

77 Exeter Close

Stevenage

Hertfordshire

SG1 4PW

T: +44(0)1438-742286

M: +44(0)7956-334938

F: +44(0)1438-759589

E: steve@...

W: https://www.comproom.co.uk

 

From: nvda@nvda.groups.io <nvda@nvda.groups.io> On Behalf Of Monte Single
Sent: 12 May 2021 01:31
To: nvda@nvda.groups.io
Subject: [nvda] navigating headings

 

Hi List,

 

I am   using;

 

www. https://nnels.ca/

 

more these days.

It is an  national network  of equitable library services.

It is available to all print disabled Canadians with a  local library  card.

 

When I do a search   on this web site, I find myself pressing the letter “h”  for headings  til  I get to the first result.

When I get to the first result, nvda says “heading llevel 3”.

 

Is there a key press, combo I can press to jump to the first “heading level 3”  without  going through all the previous headings?

 

Please, don’t kick me off the island,  because I did not find the answer to my question in the quick start guide.

 

Cheers,

 

Monte


teamtalk latest issues

 

Hi all.

currently teamtalk 5.7.1 latest beta and stable build has an issue refferenced here.

https://github.com/BearWare/TeamTalk5/issues/869

A few people including myself have had an issue with the latest version.

It appears at least in preffs that saving preffs after changing sound devices which are always using default device or internal devices for whatever reason simply will not work.

Users do say it will hang for a long time and will possibly not come back.

For now I'd go back to the previous version of 5.6 if you really need the program to save settings.

The issue sadly does take nvda out forcing me to restart.

This is not in itself an issue as even if nvda did not freez I still wouldn't be able to use the program.

The log fragment etc is refferenced in the issue though I do want to get a teamtalk log if I can find out how to generate it.

I don't need teamtalk for the moment but just a heads up, if you want the latest classic there is a showstopping bug right now.

Basically what it boils down to is you can't save configuration at all!

2981 - 3000 of 86745